Commit 38225f2e authored by Christoph Hellwig's avatar Christoph Hellwig

ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets

Switch the omap1510 platform ohci device to use dma_direct_set_offset
to set the DMA offset instead of using direct hooks into the DMA
mapping code and remove the now unused hooks.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Tested-by: default avatarJanusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
parent eba304c6
......@@ -9,7 +9,6 @@
* functions used internally by the DMA-mapping API to provide DMA
* addresses. They must not be used by drivers.
*/
#ifndef __arch_pfn_to_dma
static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
{
if (dev && dev->dma_range_map)
......@@ -34,23 +33,6 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
}
#else
static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
{
return __arch_pfn_to_dma(dev, pfn);
}
static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
{
return __arch_dma_to_pfn(dev, addr);
}
static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
{
return __arch_virt_to_dma(dev, addr);
}
#endif
static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
unsigned int offset = paddr & ~PAGE_MASK;
......
......@@ -14,42 +14,11 @@
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
* device overriding the defaults used in the dma-mapping API.
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
/*
* OMAP-1510 Local Bus address offset
*/
#define OMAP1510_LB_OFFSET UL(0x30000000)
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
#define __arch_pfn_to_dma(dev, pfn) \
({ dma_addr_t __dma = __pfn_to_phys(pfn); \
if (is_lbus_device(dev)) \
__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
__dma; })
#define __arch_dma_to_pfn(dev, addr) \
({ dma_addr_t __dma = addr; \
if (is_lbus_device(dev)) \
__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
__phys_to_pfn(__dma); \
})
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
__phys_to_virt(addr)); })
#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
(dma_addr_t) (is_lbus_device(dev) ? \
virt_to_lbus(__addr) : \
__virt_to_phys(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
#endif
......@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <asm/irq.h>
......@@ -542,6 +543,25 @@ static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
/* ULPD_APLL_CTRL */
#define APLL_NDPLL_SWITCH (1 << 0)
static int omap_1510_usb_ohci_notifier(struct notifier_block *nb,
unsigned long event, void *data)
{
struct device *dev = data;
if (event != BUS_NOTIFY_ADD_DEVICE)
return NOTIFY_DONE;
if (strncmp(dev_name(dev), "ohci", 4) == 0 &&
dma_direct_set_offset(dev, PHYS_OFFSET, OMAP1510_LB_OFFSET,
(u64)-1))
WARN_ONCE(1, "failed to set DMA offset\n");
return NOTIFY_OK;
}
static struct notifier_block omap_1510_usb_ohci_nb = {
.notifier_call = omap_1510_usb_ohci_notifier,
};
static void __init omap_1510_usb_init(struct omap_usb_config *config)
{
unsigned int val;
......@@ -600,6 +620,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
if (config->register_host) {
int status;
bus_register_notifier(&platform_bus_type,
&omap_1510_usb_ohci_nb);
ohci_device.dev.platform_data = config;
status = platform_device_register(&ohci_device);
if (status)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment