Merge branches 'for-3.18/upstream-fixes' and 'for-3.19/upstream' into for-linus

Conflicts:
	drivers/hid/hid-input.c

drivers/hid/Kconfig

@@ -629,7 +629,7 @@ config HID_ROCCAT
 	support for its special functionalities.
 
 config HID_SAITEK
-	tristate "Saitek non-fully HID-compliant devices"
+	tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
 	depends on HID
 	---help---
 	Support for Saitek devices that are not fully compliant with the
@@ -637,6 +637,7 @@ config HID_SAITEK
 
 	Supported devices:
 	- PS1000 Dual Analog Pad
+	- R.A.T.9 Gaming Mouse
 	- R.A.T.7 Gaming Mouse
 	- M.M.O.7 Gaming Mouse
 

drivers/hid/hid-core.c

@@ -779,16 +779,6 @@ static int hid_scan_report(struct hid_device *hid)
 	    (hid->group == HID_GROUP_MULTITOUCH))
 		hid->group = HID_GROUP_MULTITOUCH_WIN_8;
 
-	/*
-	* Vendor specific handlings
-	*/
-	if ((hid->vendor == USB_VENDOR_ID_SYNAPTICS) &&
-	    (hid->group == HID_GROUP_GENERIC) &&
-	    /* only bind to the mouse interface of composite USB devices */
-	    (hid->bus != BUS_USB || hid->type == HID_TYPE_USBMOUSE))
-		/* hid-rmi should take care of them, not hid-generic */
-		hid->group = HID_GROUP_RMI;
-
 	/*
 	 * Vendor specific handlings
 	 */
@@ -796,6 +786,13 @@ static int hid_scan_report(struct hid_device *hid)
 	case USB_VENDOR_ID_WACOM:
 		hid->group = HID_GROUP_WACOM;
 		break;
+	case USB_VENDOR_ID_SYNAPTICS:
+		if ((hid->group == HID_GROUP_GENERIC) &&
+		    (hid->bus != BUS_USB || hid->type == HID_TYPE_USBMOUSE))
+			/* hid-rmi should only bind to the mouse interface of
+			 * composite USB devices */
+			hid->group = HID_GROUP_RMI;
+		break;
 	}
 
 	vfree(parser);
@@ -1910,6 +1907,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9) },
 #endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
@@ -2539,7 +2537,8 @@ int hid_add_device(struct hid_device *hdev)
 	 * Scan generic devices for group information
 	 */
 	if (hid_ignore_special_drivers ||
-	    !hid_match_id(hdev, hid_have_special_driver)) {
+	    (!hdev->group &&
+	     !hid_match_id(hdev, hid_have_special_driver))) {
 		ret = hid_scan_report(hdev);
 		if (ret)
 			hid_warn(hdev, "bad device descriptor (%d)\n", ret);

drivers/hid/hid-ids.h

@@ -621,6 +621,7 @@
 
 #define USB_VENDOR_ID_MADCATZ		0x0738
 #define USB_DEVICE_ID_MADCATZ_BEATPAD	0x4540
+#define USB_DEVICE_ID_MADCATZ_RAT9	0x1709
 
 #define USB_VENDOR_ID_MCC		0x09db
 #define USB_DEVICE_ID_MCC_PMD1024LS	0x0076

drivers/hid/hid-input.c

@@ -872,7 +872,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x2cb: map_key_clear(KEY_KBDINPUTASSIST_ACCEPT);	break;
 		case 0x2cc: map_key_clear(KEY_KBDINPUTASSIST_CANCEL);	break;
 
-		default:    goto ignore;
+		default: map_key_clear(KEY_UNKNOWN);
 		}
 		break;
 

drivers/hid/hid-roccat-kone.c

@@ -46,6 +46,7 @@ static void kone_profile_activated(struct kone_device *kone, uint new_profile)
 static void kone_profile_report(struct kone_device *kone, uint new_profile)
 {
 	struct kone_roccat_report roccat_report;
+
 	roccat_report.event = kone_mouse_event_switch_profile;
 	roccat_report.value = new_profile;
 	roccat_report.key = 0;
@@ -163,6 +164,7 @@ static int kone_set_settings(struct usb_device *usb_dev,
 		struct kone_settings const *settings)
 {
 	int retval;
+
 	retval = kone_send(usb_dev, kone_command_settings,
 			settings, sizeof(struct kone_settings));
 	if (retval)
@@ -387,7 +389,7 @@ static struct bin_attribute bin_attr_profile##number = {	\
 	.read = kone_sysfs_read_profilex,			\
 	.write = kone_sysfs_write_profilex,			\
 	.private = &profile_numbers[number-1],			\
-};
+}
 PROFILE_ATTR(1);
 PROFILE_ATTR(2);
 PROFILE_ATTR(3);
@@ -456,6 +458,7 @@ static ssize_t kone_sysfs_show_tcu(struct device *dev,
 static int kone_tcu_command(struct usb_device *usb_dev, int number)
 {
 	unsigned char value;
+
 	value = number;
 	return kone_send(usb_dev, kone_command_calibrate, &value, 1);
 }
@@ -697,10 +700,8 @@ static int kone_init_specials(struct hid_device *hdev)
 			== USB_INTERFACE_PROTOCOL_MOUSE) {
 
 		kone = kzalloc(sizeof(*kone), GFP_KERNEL);
-		if (!kone) {
-			hid_err(hdev, "can't alloc device descriptor\n");
+		if (!kone)
 			return -ENOMEM;
-		}
 		hid_set_drvdata(hdev, kone);
 
 		retval = kone_init_kone_device_struct(usb_dev, kone);

drivers/hid/hid-saitek.c

@@ -7,7 +7,7 @@
  *  (This module is based on "hid-ortek".)
  *  Copyright (c) 2012 Andreas Hübner
  *
- *  R.A.T.7, M.M.O.7 (USB gaming mice):
+ *  R.A.T.7, R.A.T.9, M.M.O.7 (USB gaming mice):
  *  Fixes the mode button which cycles through three constantly pressed
  *  buttons. All three press events are mapped to one button and the
  *  missing release event is generated immediately.
@@ -179,6 +179,8 @@ static const struct hid_device_id saitek_devices[] = {
 		.driver_data = SAITEK_FIX_PS1000 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7),
 		.driver_data = SAITEK_RELEASE_MODE_RAT7 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9),
+		.driver_data = SAITEK_RELEASE_MODE_RAT7 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7),
 		.driver_data = SAITEK_RELEASE_MODE_MMO7 },
 	{ }

drivers/hid/i2c-hid/i2c-hid.c

@@ -369,7 +369,7 @@ static int i2c_hid_hwreset(struct i2c_client *client)
 static void i2c_hid_get_input(struct i2c_hid *ihid)
 {
 	int ret, ret_size;
-	int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
+	int size = ihid->bufsize;
 
 	ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
 	if (ret != size) {

drivers/hid/usbhid/hid-core.c

@@ -278,6 +278,7 @@ static void hid_irq_in(struct urb *urb)
 		usbhid->retry_delay = 0;
 		if ((hid->quirks & HID_QUIRK_ALWAYS_POLL) && !hid->open)
 			break;
+		if (!test_bit(HID_RESUME_RUNNING, &usbhid->iofl)) {
 			hid_input_report(urb->context, HID_INPUT_REPORT,
 					 urb->transfer_buffer,
 					 urb->actual_length, 1);
@@ -290,6 +291,7 @@ static void hid_irq_in(struct urb *urb)
 				set_bit(HID_KEYS_PRESSED, &usbhid->iofl);
 			else
 				clear_bit(HID_KEYS_PRESSED, &usbhid->iofl);
+		}
 		break;
 	case -EPIPE:		/* stall */
 		usbhid_mark_busy(usbhid);
@@ -688,6 +690,7 @@ int usbhid_open(struct hid_device *hid)
 			goto done;
 		}
 		usbhid->intf->needs_remote_wakeup = 1;
+		set_bit(HID_RESUME_RUNNING, &usbhid->iofl);
 		res = hid_start_in(hid);
 		if (res) {
 			if (res != -ENOSPC) {
@@ -701,6 +704,15 @@ int usbhid_open(struct hid_device *hid)
 			}
 		}
 		usb_autopm_put_interface(usbhid->intf);
+
+		/*
+		 * In case events are generated while nobody was listening,
+		 * some are released when the device is re-opened.
+		 * Wait 50 msec for the queue to empty before allowing events
+		 * to go through hid.
+		 */
+		msleep(50);
+		clear_bit(HID_RESUME_RUNNING, &usbhid->iofl);
 	}
 done:
 	mutex_unlock(&hid_open_mut);

drivers/hid/usbhid/usbhid.h

@@ -52,6 +52,7 @@ struct usb_interface *usbhid_find_interface(int minor);
 #define HID_STARTED		8
 #define HID_KEYS_PRESSED	10
 #define HID_NO_BANDWIDTH	11
+#define HID_RESUME_RUNNING	12
 
 /*
  * USB-specific HID struct, to be pointed to

drivers/hid/wacom_sys.c

@@ -70,22 +70,15 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 static int wacom_open(struct input_dev *dev)
 {
 	struct wacom *wacom = input_get_drvdata(dev);
-	int retval;
-
-	mutex_lock(&wacom->lock);
-	retval = hid_hw_open(wacom->hdev);
-	mutex_unlock(&wacom->lock);
 
-	return retval;
+	return hid_hw_open(wacom->hdev);
 }
 
 static void wacom_close(struct input_dev *dev)
 {
 	struct wacom *wacom = input_get_drvdata(dev);
 
-	mutex_lock(&wacom->lock);
 	hid_hw_close(wacom->hdev);
-	mutex_unlock(&wacom->lock);
 }
 
 /*

drivers/hid/wacom_wac.c

@@ -3026,6 +3026,7 @@ const struct hid_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x4004) },
 	{ USB_DEVICE_WACOM(0x5000) },
 	{ USB_DEVICE_WACOM(0x5002) },
+	{ USB_DEVICE_LENOVO(0x6004) },
 
 	{ USB_DEVICE_WACOM(HID_ANY_ID) },
 	{ }

include/linux/hid.h

@@ -312,10 +312,6 @@ struct hid_item {
  * Vendor specific HID device groups
  */
 #define HID_GROUP_RMI				0x0100
-
-/*
- * Vendor specific HID device groups
- */
 #define HID_GROUP_WACOM				0x0101
 
 /*