Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Kevin Hilman:
 "About 10 days worth of small bug fixes, and the (hopefully) final
  round fixes for from arm-soc land for the -rc cycle.  Nothing special
  to note, but here's a brief summary of fixes by SoC type:

   - OMAP:
        small set of misc DT fixes; boot fix for THUMB2 kernel

   - mediatek:
        PMIC fixes; DT fix for model name

   - exynos:
        wakeup interupt fixes for 3250

   - mvebu:
        revert mbus patch which broke DMA masters

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
  ARM: dts: AM35xx: fix system control module clocks
  arm64: dts: mt8173-evb: fix model name
  ARM: exynos: Fix wake-up interrupts for Exynos3250
  ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900
  ARM: dts: Fix dm816x to use right compatible flag for MUSB
  ARM: OMAP3: Fix booting with thumb2 kernel
  Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"
  bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms.
  ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTC
  soc: mediatek: Add compile dependency to pmic-wrapper
  soc: mediatek: PMIC wrap: Fix register state machine handling
  soc: mediatek: PMIC wrap: Fix clock rate handling

Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt

@@ -32,8 +32,8 @@ Example:
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -223,6 +223,25 @@ tps: tps@24 {
 /include/ "tps65217.dtsi"
 
 &tps {
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";

arch/arm/boot/dts/am35xx-clocks.dtsi

@@ -12,7 +12,7 @@ emac_ick: emac_ick {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <1>;
 	};
 
@@ -20,7 +20,7 @@ emac_fck: emac_fck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&rmii_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <9>;
 	};
 
@@ -28,7 +28,7 @@ vpfe_ick: vpfe_ick {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <2>;
 	};
 
@@ -36,7 +36,7 @@ vpfe_fck: vpfe_fck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pclk_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <10>;
 	};
 
@@ -44,7 +44,7 @@ hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <0>;
 	};
 
@@ -52,7 +52,7 @@ hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <8>;
 	};
 
@@ -60,7 +60,7 @@ hecc_ck: hecc_ck {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&sys_ck>;
-		reg = <0x059c>;
+		reg = <0x032c>;
 		ti,bit-shift = <3>;
 	};
 };

arch/arm/boot/dts/armada-xp-linksys-mamba.dts

@@ -95,6 +95,11 @@ pcie@3,0 {
 
 		internal-regs {
 
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+
 			/* J10: VCC, NC, RX, NC, TX, GND  */
 			serial@12000 {
 				status = "okay";

arch/arm/boot/dts/dm816x.dtsi

@@ -382,7 +382,7 @@ usb: usb_otg_hs@47401000 {
 			ti,hwmods = "usb_otg_hs";
 
 			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401400 0x400
 				       0x47401000 0x200>;
 				reg-names = "mc", "control";
@@ -422,7 +422,7 @@ &cppi41dma 11 1 &cppi41dma 12 1
 			};
 
 			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
+				compatible = "ti,musb-dm816";
 				reg = <0x47401c00 0x400
 				       0x47401800 0x200>;
 				reg-names = "mc", "control";

arch/arm/boot/dts/omap3-n900.dts

@@ -832,8 +832,8 @@ tsc2005@0 {
 		touchscreen-fuzz-x = <4>;
 		touchscreen-fuzz-y = <7>;
 		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
 		touchscreen-max-pressure = <2048>;
 
 		ti,x-plate-ohms = <280>;

arch/arm/mach-exynos/suspend.c

@@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
 static u32 exynos_irqwake_intmask = 0xffffffff;
 
 static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
-	{ 105, BIT(1) }, /* RTC alarm */
-	{ 106, BIT(2) }, /* RTC tick */
+	{ 73, BIT(1) }, /* RTC alarm */
+	{ 74, BIT(2) }, /* RTC tick */
 	{ /* sentinel */ },
 };
 

arch/arm/mach-omap2/sleep34xx.S

@@ -203,23 +203,8 @@ save_context_wfi:
 	 */
 	ldr	r1, kernel_flush
 	blx	r1
-	/*
-	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
-	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
-	 * This sequence switches back to ARM.  Note that .align may insert a
-	 * nop: bx pc needs to be word-aligned in order to work.
-	 */
- THUMB(	.thumb		)
- THUMB(	.align		)
- THUMB(	bx	pc	)
- THUMB(	nop		)
-	.arm
-
 	b	omap3_do_wfi
-
-/*
- * Local variables
- */
+ENDPROC(omap34xx_cpu_suspend)
 omap3_do_wfi_sram_addr:
 	.word omap3_do_wfi_sram
 kernel_flush:
@@ -364,10 +349,7 @@ exit_nonoff_modes:
  * ===================================
  */
 	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
-
-/*
- * Local variables
- */
+ENDPROC(omap3_do_wfi)
 sdrc_power:
 	.word	SDRC_POWER_V
 cm_idlest1_core:

arch/arm64/boot/dts/mediatek/mt8173-evb.dts

@@ -16,7 +16,8 @@
 #include "mt8173.dtsi"
 
 / {
-	model = "mediatek,mt8173-evb";
+	model = "MediaTek MT8173 evaluation board";
+	compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
 
 	aliases {
 		serial0 = &uart0;

drivers/bus/mvebu-mbus.c

@@ -58,7 +58,6 @@
 #include <linux/debugfs.h>
 #include <linux/log2.h>
 #include <linux/syscore_ops.h>
-#include <linux/memblock.h>
 
 /*
  * DDR target is the same on all platforms.
@@ -70,6 +69,7 @@
  */
 #define WIN_CTRL_OFF		0x0000
 #define   WIN_CTRL_ENABLE       BIT(0)
+/* Only on HW I/O coherency capable platforms */
 #define   WIN_CTRL_SYNCBARRIER  BIT(1)
 #define   WIN_CTRL_TGT_MASK     0xf0
 #define   WIN_CTRL_TGT_SHIFT    4
@@ -102,9 +102,7 @@
 
 /* Relative to mbusbridge_base */
 #define MBUS_BRIDGE_CTRL_OFF	0x0
-#define  MBUS_BRIDGE_SIZE_MASK  0xffff0000
 #define MBUS_BRIDGE_BASE_OFF	0x4
-#define  MBUS_BRIDGE_BASE_MASK  0xffff0000
 
 /* Maximum number of windows, for all known platforms */
 #define MBUS_WINS_MAX           20
@@ -323,8 +321,9 @@ static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
 	ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
 		(attr << WIN_CTRL_ATTR_SHIFT)    |
 		(target << WIN_CTRL_TGT_SHIFT)   |
-		WIN_CTRL_SYNCBARRIER             |
 		WIN_CTRL_ENABLE;
+	if (mbus->hw_io_coherency)
+		ctrl |= WIN_CTRL_SYNCBARRIER;
 
 	writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
 	writel(ctrl, addr + WIN_CTRL_OFF);
@@ -577,106 +576,36 @@ static unsigned int armada_xp_mbus_win_remap_offset(int win)
 		return MVEBU_MBUS_NO_REMAP;
 }
 
-/*
- * Use the memblock information to find the MBus bridge hole in the
- * physical address space.
- */
-static void __init
-mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
-{
-	struct memblock_region *r;
-	uint64_t s = 0;
-
-	for_each_memblock(memory, r) {
-		/*
-		 * This part of the memory is above 4 GB, so we don't
-		 * care for the MBus bridge hole.
-		 */
-		if (r->base >= 0x100000000)
-			continue;
-
-		/*
-		 * The MBus bridge hole is at the end of the RAM under
-		 * the 4 GB limit.
-		 */
-		if (r->base + r->size > s)
-			s = r->base + r->size;
-	}
-
-	*start = s;
-	*end = 0x100000000;
-}
-
 static void __init
 mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
 {
 	int i;
 	int cs;
-	uint64_t mbus_bridge_base, mbus_bridge_end;
 
 	mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
 
-	mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
-
 	for (i = 0, cs = 0; i < 4; i++) {
-		u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
-		u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
-		u64 end;
-		struct mbus_dram_window *w;
-
-		/* Ignore entries that are not enabled */
-		if (!(size & DDR_SIZE_ENABLED))
-			continue;
-
-		/*
-		 * Ignore entries whose base address is above 2^32,
-		 * since devices cannot DMA to such high addresses
-		 */
-		if (base & DDR_BASE_CS_HIGH_MASK)
-			continue;
-
-		base = base & DDR_BASE_CS_LOW_MASK;
-		size = (size | ~DDR_SIZE_MASK) + 1;
-		end = base + size;
-
-		/*
-		 * Adjust base/size of the current CS to make sure it
-		 * doesn't overlap with the MBus bridge hole. This is
-		 * particularly important for devices that do DMA from
-		 * DRAM to a SRAM mapped in a MBus window, such as the
-		 * CESA cryptographic engine.
-		 */
-
-		/*
-		 * The CS is fully enclosed inside the MBus bridge
-		 * area, so ignore it.
-		 */
-		if (base >= mbus_bridge_base && end <= mbus_bridge_end)
-			continue;
-
-		/*
-		 * Beginning of CS overlaps with end of MBus, raise CS
-		 * base address, and shrink its size.
-		 */
-		if (base >= mbus_bridge_base && end > mbus_bridge_end) {
-			size -= mbus_bridge_end - base;
-			base = mbus_bridge_end;
-		}
+		u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+		u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
 
 		/*
-		 * End of CS overlaps with beginning of MBus, shrink
-		 * CS size.
+		 * We only take care of entries for which the chip
+		 * select is enabled, and that don't have high base
+		 * address bits set (devices can only access the first
+		 * 32 bits of the memory).
 		 */
-		if (base < mbus_bridge_base && end > mbus_bridge_base)
-			size -= end - mbus_bridge_base;
+		if ((size & DDR_SIZE_ENABLED) &&
+		    !(base & DDR_BASE_CS_HIGH_MASK)) {
+			struct mbus_dram_window *w;
 
 			w = &mvebu_mbus_dram_info.cs[cs++];
 			w->cs_index = i;
 			w->mbus_attr = 0xf & ~(1 << i);
 			if (mbus->hw_io_coherency)
 				w->mbus_attr |= ATTR_HW_COHERENCY;
-		w->base = base;
-		w->size = size;
+			w->base = base & DDR_BASE_CS_LOW_MASK;
+			w->size = (size | ~DDR_SIZE_MASK) + 1;
+		}
 	}
 	mvebu_mbus_dram_info.num_cs = cs;
 }

drivers/soc/mediatek/Kconfig

@@ -4,6 +4,7 @@
 config MTK_PMIC_WRAP
 	tristate "MediaTek PMIC Wrapper Support"
 	depends on ARCH_MEDIATEK
+	depends on RESET_CONTROLLER
 	select REGMAP
 	help
 	  Say yes here to add support for MediaTek PMIC Wrapper found

drivers/soc/mediatek/mtk-pmic-wrap.c

@@ -443,11 +443,6 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp,
 static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
 {
 	int ret;
-	u32 val;
-
-	val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
-	if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR)
-		pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
 
 	ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
 	if (ret)
@@ -462,11 +457,6 @@ static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
 static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
 {
 	int ret;
-	u32 val;
-
-	val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
-	if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR)
-		pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
 
 	ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
 	if (ret)
@@ -480,6 +470,8 @@ static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
 
 	*rdata = PWRAP_GET_WACS_RDATA(pwrap_readl(wrp, PWRAP_WACS2_RDATA));
 
+	pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
+
 	return 0;
 }
 
@@ -563,45 +555,17 @@ static int pwrap_init_sidly(struct pmic_wrapper *wrp)
 
 static int pwrap_init_reg_clock(struct pmic_wrapper *wrp)
 {
-	unsigned long rate_spi;
-	int ck_mhz;
-
-	rate_spi = clk_get_rate(wrp->clk_spi);
-
-	if (rate_spi > 26000000)
-		ck_mhz = 26;
-	else if (rate_spi > 18000000)
-		ck_mhz = 18;
-	else
-		ck_mhz = 0;
-
-	switch (ck_mhz) {
-	case 18:
-		if (pwrap_is_mt8135(wrp))
-			pwrap_writel(wrp, 0xc, PWRAP_CSHEXT);
-		pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_WRITE);
-		pwrap_writel(wrp, 0xc, PWRAP_CSHEXT_READ);
-		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
-		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
-		break;
-	case 26:
-		if (pwrap_is_mt8135(wrp))
+	if (pwrap_is_mt8135(wrp)) {
 		pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
 		pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
 		pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
 		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
 		pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
-		break;
-	case 0:
-		if (pwrap_is_mt8135(wrp))
-			pwrap_writel(wrp, 0xf, PWRAP_CSHEXT);
-		pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_WRITE);
-		pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_READ);
-		pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_START);
-		pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_END);
-		break;
-	default:
-		return -EINVAL;
+	} else {
+		pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
+		pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
+		pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
+		pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
 	}
 
 	return 0;