diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 4b8872cc8bf935393550c2f6b04c7d0ba50ae0c1..39d9e6ddefedbbc4d1d82f2bf99ba9c2a785f32f 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -220,6 +220,14 @@ mux1 {
function = "ebi2";
};
};
+
+ /* Interrupt line for the KXSD9 accelerometer */
+ dragon_kxsd9_gpios: kxsd9 {
+ irq {
+ pins = "gpio57"; /* IRQ line */
+ bias-pull-up;
+ };
+ };
};
qcom,ssbi@500000 {
@@ -272,6 +280,15 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
+ dragon_mpu3050_gpios: mpu3050-gpios {
+ pinconf {
+ pins = "gpio17";
+ function = "normal";
+ input-enable;
+ bias-disable;
+ power-source = <PM8058_GPIO_S3>;
+ };
+ };
dragon_sdcc3_gpios: sdcc3-gpios {
pinconf {
pins = "gpio22";
@@ -369,8 +386,8 @@ i2c@19c80000 {
ak8975@0c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
- /* GPIO33 has interrupt 224 on the PM8058 */
- interrupt-parent = <&pm8058_gpio>;
+ /* FIXME: GPIO33 has interrupt 224 on the PM8058 */
+ interrupt-parent = <&pm8058>;
interrupts = <224 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&dragon_ak8975_gpios>;
@@ -380,8 +397,8 @@ ak8975@0c {
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
- /* GPIO16 has interrupt 207 on the PM8058 */
- interrupt-parent = <&pm8058_gpio>;
+ /* FIXME: GPIO16 has interrupt 207 on the PM8058 */
+ interrupt-parent = <&pm8058>;
interrupts = <207 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -389,6 +406,41 @@ bmp085@77 {
vddd-supply = <&pm8058_lvs0>; // 1.8V
vdda-supply = <&pm8058_l14>; // 2.85V
};
+ mpu3050@68 {
+ compatible = "invensense,mpu3050";
+ reg = <0x68>;
+ /*
+ * GPIO17 has interrupt 208 on the
+ * PM8058, it is pulled high by a 10k
+ * resistor to VLOGIC so needs to be
+ * active low/falling edge.
+ */
+ interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_mpu3050_gpios>;
+ vlogic-supply = <&pm8058_lvs0>; // 1.8V
+ vdd-supply = <&pm8058_l14>; // 2.85V
+
+ /*
+ * The MPU-3050 acts as a hub for the
+ * accelerometer.
+ */
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ kxsd9@18 {
+ compatible = "kionix,kxsd9";
+ reg = <0x18>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_kxsd9_gpios>;
+ iovdd-supply = <&pm8058_lvs0>; // 1.8V
+ vdd-supply = <&pm8058_l14>; // 2.85V
+ };
+ };
+ };
};
};
@@ -412,7 +464,7 @@ ethernet-ebi2@2,0 {
* The second interrupt is the PME interrupt
* for network wakeup, connected to the TLMM.
*/
- interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>,
+ interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>,
<&tlmm 29 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
vdd33a-supply = <&dragon_veth>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
index 39ae2bc8cb084a288873812c9530cff7e402a959..8f5de029bca9eae93ae957ce525ba1550f2a7d0c 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
@@ -39,6 +39,17 @@ vcc3v3: vcc3v3 {
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
soc {
rpm@108000 {
regulators {
@@ -74,6 +85,14 @@ s1 {
bias-pull-down;
};
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ regulator-always-on;
+ };
+
s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
@@ -121,6 +140,16 @@ l6 {
bias-pull-down;
};
+ /**
+ * 1.8v required on LS expansion
+ * for mezzanine boards
+ */
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
@@ -347,5 +376,45 @@ sdcc@12180000 {
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
+
+ riva-pil@3204000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+ };
+
+ hdmi-tx@4a00000 {
+ status = "okay";
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ hdmi-mux-supply = <&vcc3v3>;
+
+ hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
+ hdmi-phy@4a00400 {
+ status = "okay";
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ };
+
+ mdp@5100000 {
+ status = "okay";
+
+ ports {
+ port@3 {
+ endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 3d37cab3b9a9cb5c9a9f8dcd314c059fc9b1545a..881ce707311a05e35160456e76bf564863ea0895 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -75,25 +75,6 @@ conf {
bias-disable;
};
};
-
- hdmi_pinctrl: hdmi-pinctrl {
- mux {
- pins = "gpio70", "gpio71", "gpio72";
- function = "hdmi";
- };
-
- pinconf_ddc {
- pins = "gpio70", "gpio71";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf_hpd {
- pins = "gpio72";
- bias-pull-down;
- drive-strength = <16>;
- };
- };
};
rpm@108000 {
@@ -368,9 +349,6 @@ hdmi-tx@4a00000 {
hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_pinctrl>;
-
ports {
port@0 {
endpoint {
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index 6b801e7e57a2103f8cfb9f00a21bf071d25c71a7..173ab7c299cea326055e1fa6cc9da27018895b89 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -284,4 +284,41 @@ pinconf {
bias-disable = <0>;
};
};
+
+ riva_fm_pin_a: riva-fm-active {
+ pins = "gpio14", "gpio15";
+ function = "riva_fm";
+ };
+
+ riva_bt_pin_a: riva-bt-active {
+ pins = "gpio16", "gpio17";
+ function = "riva_bt";
+ };
+
+ riva_wlan_pin_a: riva-wlan-active {
+ pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+ function = "riva_wlan";
+
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ hdmi_pinctrl: hdmi-pinctrl {
+ mux {
+ pins = "gpio70", "gpio71", "gpio72";
+ function = "hdmi";
+ };
+
+ pinconf_ddc {
+ pins = "gpio70", "gpio71";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf_hpd {
+ pins = "gpio72";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index ebd675ca94b4ec3e217eb6b9f6011dabdc44f2eb..a34ba355545495dfa6547bfd395f20a008afba2c 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -390,5 +390,12 @@ sdcc3: sdcc@12180000 {
pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
};
};
+
+ riva-pil@3204000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 407a4610f4a7e055a488defe3fc52c05f1b3fa63..14a6f5ed02de66f7592329643d43b69d645a15db 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -22,13 +22,18 @@ smem_region: smem@80000000 {
reg = <0x80000000 0x200000>;
no-map;
};
+
+ wcnss_mem: wcnss@8f000000 {
+ reg = <0x8f000000 0x700000>;
+ no-map;
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -39,7 +44,7 @@ cpu@0 {
cpu-idle-states = <&CPU_SPC>;
};
- cpu@1 {
+ CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -50,7 +55,7 @@ cpu@1 {
cpu-idle-states = <&CPU_SPC>;
};
- cpu@2 {
+ CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -61,7 +66,7 @@ cpu@2 {
cpu-idle-states = <&CPU_SPC>;
};
- cpu@3 {
+ CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -180,7 +185,7 @@ cpu-pmu {
};
clocks {
- cxo_board {
+ cxo_board: cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
@@ -631,6 +636,33 @@ rng@1a500000 {
clock-names = "core";
};
+ ssbi@c00000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00c00000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+
+ pm8821: pmic@1 {
+ compatible = "qcom,pm8821";
+ interrupt-parent = <&tlmm_pinmux>;
+ interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ interrupts = <24 IRQ_TYPE_NONE>,
+ <25 IRQ_TYPE_NONE>,
+ <26 IRQ_TYPE_NONE>,
+ <27 IRQ_TYPE_NONE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
@@ -1327,6 +1359,8 @@ pcie: pci@1b500000 {
hdmi: hdmi-tx@4a00000 {
compatible = "qcom,hdmi-tx-8960";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pinctrl>;
reg = <0x04a00000 0x2f0>;
reg-names = "core_physical";
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -1420,6 +1454,249 @@ mdp_dtv_out: endpoint {
};
};
};
+
+ riva: riva-pil@3204000 {
+ compatible = "qcom,riva-pil";
+
+ reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal";
+
+ memory-region = <&wcnss_mem>;
+
+ vddcx-supply = <&pm8921_s3>;
+ vddmx-supply = <&pm8921_l24>;
+ vddpx-supply = <&pm8921_s4>;
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3660";
+
+ clocks = <&cxo_board>;
+ clock-names = "xo";
+
+ vddxo-supply = <&pm8921_l4>;
+ vddrfa-supply = <&pm8921_s2>;
+ vddpa-supply = <&pm8921_l10>;
+ vdddig-supply = <&pm8921_lvs2>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&l2cc 8 25>;
+ qcom,smd-edge = <6>;
+
+ label = "riva";
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&riva>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
+ etb@1a01000 {
+ compatible = "coresight-etb10", "arm,primecell";
+ reg = <0x1a01000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ tpiu@1a03000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x1a03000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port@2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out>;
+ };
+ };
+ };
+ };
+
+ funnel@1a04000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x1a04000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 2 - connected to STM component
+ * 3 - not-connected
+ * 6 - not-connected
+ * 7 - not-connected
+ */
+ port@0 {
+ reg = <0>;
+ funnel_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@4 {
+ reg = <4>;
+ funnel_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@5 {
+ reg = <5>;
+ funnel_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ funnel_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etm@1a1c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
+ };
+ };
+
+ etm@1a1d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
+ };
+ };
+
+ etm@1a1e000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
+ };
+ };
+
+ etm@1a1f000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
+ };
+ };
};
};
#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 2e375576ffd06edc7c1f83863df13e6f17f571e4..76f4e8921d58f8a1a1c6bf2ab42edc9c839a8324 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -65,13 +65,13 @@ clocks {
cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <19200000>;
+ clock-frequency = <25000000>;
};
pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <27000000>;
+ clock-frequency = <25000000>;
};
sleep_clk: sleep_clk {
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 23de764558abef44b67570c6001450595f02906e..1adc04978a47fe575ddd30e601f58fb4c5663e1a 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -48,7 +48,7 @@ sdcc3: sdcc@12180000 {
};
};
-&pmicintc {
+&pm8058 {
keypad@148 {
linux,keymap = <
MATRIX_KEY(0, 0, KEY_FN_F1)
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 4d828f810746872da14fe49c204462c3b11c983e..91c9a62ae7250184147c9750e417d39f54915827 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -163,7 +163,7 @@ qcom,ssbi@500000 {
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic@0 {
+ pm8058: pmic@0 {
compatible = "qcom,pm8058";
interrupt-parent = <&tlmm>;
interrupts = <88 8>;
@@ -176,7 +176,7 @@ pm8058_gpio: gpio@150 {
compatible = "qcom,pm8058-gpio",
"qcom,ssbi-gpio";
reg = <0x150>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <192 IRQ_TYPE_NONE>,
<193 IRQ_TYPE_NONE>,
<194 IRQ_TYPE_NONE>,
@@ -232,7 +232,7 @@ pm8058_mpps: mpps@50 {
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts =
<128 IRQ_TYPE_NONE>,
<129 IRQ_TYPE_NONE>,
@@ -251,7 +251,7 @@ pm8058_mpps: mpps@50 {
pwrkey@1c {
compatible = "qcom,pm8058-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <50 1>, <51 1>;
debounce = <15625>;
pull-up;
@@ -260,7 +260,7 @@ pwrkey@1c {
keypad@148 {
compatible = "qcom,pm8058-keypad";
reg = <0x148>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <74 1>, <75 1>;
debounce = <15>;
scan-delay = <32>;
@@ -270,7 +270,7 @@ keypad@148 {
rtc@1e8 {
compatible = "qcom,pm8058-rtc";
reg = <0x1e8>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <39 1>;
allow-set-time;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index e7c1577d56f4812663afc7bbb4ad262743139bf5..96c853bab8babe174169768fba59ce8951d10549 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -413,6 +413,14 @@ pin {
dma-controller@f9944000 {
qcom,controlled-remotely;
};
+
+ usb-phy@f9a55000 {
+ status = "ok";
+ };
+
+ usb@f9a55000 {
+ status = "ok";
+ };
};
&spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 49d579f288654aace0b7a2b630286a10322f8136..d3e1a61b86710ee017adec7c243e5ce2878d0252 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include "skeleton.dtsi"
/ {
@@ -30,7 +31,7 @@ reserved@0d200000 {
no-map;
};
- adsp@0dc00000 {
+ adsp_region: adsp@0dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
};
@@ -59,11 +60,6 @@ rmtfs@0fd80000 {
reg = <0x0fd80000 0x180000>;
no-map;
};
-
- unused@0ff00000 {
- reg = <0x0ff00000 0x10100000>;
- no-map;
- };
};
cpus {
@@ -242,6 +238,24 @@ timer {
clock-frequency = <19200000>;
};
+ adsp-pil {
+ compatible = "qcom,msm8974-adsp-pil";
+
+ interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ cx-supply = <&pm8841_s2>;
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
+
smem {
compatible = "qcom,smem";
@@ -251,6 +265,31 @@ smem {
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smp2p-modem {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
@@ -655,11 +694,56 @@ blsp2_dma: dma-controller@f9944000 {
#dma-cells = <1>;
qcom,ee = <0>;
};
+
+ usb1_phy: usb-phy@f9a55000 {
+ compatible = "qcom,usb-otg-snps";
+
+ reg = <0xf9a55000 0x400>;
+ interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>,
+ <&spmi_bus 0 0x9 0 0>;
+ interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
+
+ vddcx-supply = <&pm8841_s2>;
+ v3p3-supply = <&pm8941_l24>;
+ v1p8-supply = <&pm8941_l6>;
+
+ dr_mode = "otg";
+ qcom,phy-init-sequence = <0x63 0x81 0xfffffff>;
+ qcom,otg-control = <1>;
+ qcom,phy-num = <0>;
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+
+ clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB_HS_AHB_CLK>;
+ clock-names = "phy", "core", "iface";
+
+ status = "disabled";
+ };
+
+ usb@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x400>;
+ dr_mode = "otg";
+ interrupts = <0 134 0>, <0 140 0>;
+ interrupt-names = "core_irq", "async_irq";
+ usb-phy = <&usb1_phy>;
+
+ status = "disabled";
+ };
};
smd {
compatible = "qcom,smd";
+ adsp {
+ interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+ };
+
modem {
interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;