brcmfmac: use brcmf_get_ifp() to map ifidx to struct brcmf_if instance

The knowledge on how to map the interface index to a struct brcmf_if
instance is in brcmf_get_ifp() so use that function when only the
interface index is known instead of accessing brcmf_pub::iflist
directly.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/brcm80211/brcmfmac/btcoex.c

@@ -149,7 +149,7 @@ static s32 brcmf_btcoex_params_read(struct brcmf_if *ifp, u32 addr, u32 *data)
 static void brcmf_btcoex_boost_wifi(struct brcmf_btcoex_info *btci,
 				    bool trump_sco)
 {
-	struct brcmf_if *ifp = btci->cfg->pub->iflist[0];
+	struct brcmf_if *ifp = brcmf_get_ifp(btci->cfg->pub, 0);
 
 	if (trump_sco && !btci->saved_regs_part2) {
 		/* this should reduce eSCO agressive
@@ -468,7 +468,7 @@ int brcmf_btcoex_set_mode(struct brcmf_cfg80211_vif *vif,
 {
 	struct brcmf_cfg80211_info *cfg = wiphy_priv(vif->wdev.wiphy);
 	struct brcmf_btcoex_info *btci = cfg->btcoex;
-	struct brcmf_if *ifp = cfg->pub->iflist[0];
+	struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
 
 	switch (mode) {
 	case BRCMF_BTCOEX_DISABLED:

drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c

@@ -6213,7 +6213,7 @@ static void brcmf_free_wiphy(struct wiphy *wiphy)
 struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
 						  struct device *busdev)
 {
-	struct net_device *ndev = drvr->iflist[0]->ndev;
+	struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
 	struct brcmf_cfg80211_info *cfg;
 	struct wiphy *wiphy;
 	struct brcmf_cfg80211_vif *vif;

drivers/net/wireless/brcm80211/brcmfmac/feature.c

@@ -121,7 +121,7 @@ static void brcmf_feat_iovar_int_set(struct brcmf_if *ifp,
 
 void brcmf_feat_attach(struct brcmf_pub *drvr)
 {
-	struct brcmf_if *ifp = drvr->iflist[0];
+	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
 
 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");

drivers/net/wireless/brcm80211/brcmfmac/flowring.c

@@ -221,7 +221,7 @@ static void brcmf_flowring_block(struct brcmf_flowring *flow, u8 flowid,
 
 	bus_if = dev_get_drvdata(flow->dev);
 	drvr = bus_if->drvr;
-	ifp = drvr->iflist[ifidx];
+	ifp = brcmf_get_ifp(drvr, ifidx);
 	brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_FLOW, blocked);
 
 	spin_unlock_irqrestore(&flow->block_lock, flags);

drivers/net/wireless/brcm80211/brcmfmac/fweh.c

@@ -334,7 +334,7 @@ void brcmf_fweh_attach(struct brcmf_pub *drvr)
 void brcmf_fweh_detach(struct brcmf_pub *drvr)
 {
 	struct brcmf_fweh_info *fweh = &drvr->fweh;
-	struct brcmf_if *ifp = drvr->iflist[0];
+	struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
 	s8 eventmask[BRCMF_EVENTING_MASK_LEN];
 
 	if (ifp) {

drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c

@@ -972,7 +972,7 @@ static void
 brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq,
 			     u8 if_id)
 {
-	struct brcmf_if *ifp = fws->drvr->iflist[!if_id ? 0 : if_id + 1];
+	struct brcmf_if *ifp = brcmf_get_ifp(fws->drvr, if_id);
 
 	if (WARN_ON(!ifp))
 		return;
@@ -2118,6 +2118,7 @@ static int brcmf_debugfs_fws_stats_read(struct seq_file *seq, void *data)
 int brcmf_fws_init(struct brcmf_pub *drvr)
 {
 	struct brcmf_fws_info *fws;
+	struct brcmf_if *ifp;
 	u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS;
 	int rc;
 	u32 mode;
@@ -2177,21 +2178,22 @@ int brcmf_fws_init(struct brcmf_pub *drvr)
 	 * continue. Set mode back to none indicating not enabled.
 	 */
 	fws->fw_signals = true;
-	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "tlv", tlv)) {
+	ifp = brcmf_get_ifp(drvr, 0);
+	if (brcmf_fil_iovar_int_set(ifp, "tlv", tlv)) {
 		brcmf_err("failed to set bdcv2 tlv signaling\n");
 		fws->fcmode = BRCMF_FWS_FCMODE_NONE;
 		fws->fw_signals = false;
 	}
 
-	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1))
+	if (brcmf_fil_iovar_int_set(ifp, "ampdu_hostreorder", 1))
 		brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n");
 
 	/* Enable seq number reuse, if supported */
-	if (brcmf_fil_iovar_int_get(drvr->iflist[0], "wlfc_mode", &mode) == 0) {
+	if (brcmf_fil_iovar_int_get(ifp, "wlfc_mode", &mode) == 0) {
 		if (BRCMF_FWS_MODE_GET_REUSESEQ(mode)) {
 			mode = 0;
 			BRCMF_FWS_MODE_SET_REUSESEQ(mode, 1);
-			if (brcmf_fil_iovar_int_set(drvr->iflist[0],
+			if (brcmf_fil_iovar_int_set(ifp,
 						    "wlfc_mode", mode) == 0) {
 				BRCMF_FWS_MODE_SET_REUSESEQ(fws->mode, 1);
 			}