Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild

.gitignore

@@ -10,6 +10,7 @@
 *.a
 *.s
 *.ko
+*.so
 *.mod.c
 
 #

Documentation/kbuild/modules.txt

@@ -18,6 +18,7 @@ In this document you will find information about:
 	=== 5. Include files
 	   --- 5.1 How to include files from the kernel include dir
 	   --- 5.2 External modules using an include/ dir
+	   --- 5.3 External modules using several directories
 	=== 6. Module installation
 	   --- 6.1 INSTALL_MOD_PATH
 	   --- 6.2 INSTALL_MOD_DIR
@@ -344,6 +345,45 @@ directory and therefore needs to deal with this in their kbuild file.
 	Note that in the assignment there is no space between -I and the path.
 	This is a kbuild limitation:  there must be no space present.
 
+--- 5.3 External modules using several directories
+
+	If an external module does not follow the usual kernel style but
+	decide to spread files over several directories then kbuild can
+	support this too.
+
+	Consider the following example:
+	
+	|
+	+- src/complex_main.c
+	|   +- hal/hardwareif.c
+	|   +- hal/include/hardwareif.h
+	+- include/complex.h
+	
+	To build a single module named complex.ko we then need the following
+	kbuild file:
+
+	Kbuild:
+		obj-m := complex.o
+		complex-y := src/complex_main.o
+		complex-y += src/hal/hardwareif.o
+
+		EXTRA_CFLAGS := -I$(src)/include
+		EXTRA_CFLAGS += -I$(src)src/hal/include
+
+
+	kbuild knows how to handle .o files located in another directory -
+	although this is NOT reccommended practice. The syntax is to specify
+	the directory relative to the directory where the Kbuild file is
+	located.
+
+	To find the .h files we have to explicitly tell kbuild where to look
+	for the .h files. When kbuild executes current directory is always
+	the root of the kernel tree (argument to -C) and therefore we have to
+	tell kbuild how to find the .h files using absolute paths.
+	$(src) will specify the absolute path to the directory where the
+	Kbuild file are located when being build as an external module.
+	Therefore -I$(src)/ is used to point out the directory of the Kbuild
+	file and any additional path are just appended.
 
 === 6. Module installation
 

arch/x86_64/ia32/.gitignore

-vsyscall*.so

drivers/media/dvb/cinergyT2/cinergyT2.c

@@ -60,7 +60,7 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 #define dprintk(level, args...)						\
 do {									\
 	if ((debug & level)) {						\
-		printk("%s: %s(): ", __stringify(KBUILD_MODNAME),	\
+		printk("%s: %s(): ", KBUILD_MODNAME,			\
 		       __FUNCTION__);					\
 		printk(args); }						\
 } while (0)

drivers/media/dvb/ttpci/budget.h

@@ -19,7 +19,7 @@ extern int budget_debug;
 #endif
 
 #define dprintk(level,args...) \
-	    do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
+	    do { if ((budget_debug & level)) { printk("%s: %s(): ", KBUILD_MODNAME, __FUNCTION__); printk(args); } } while (0)
 
 struct budget_info {
 	char *name;

drivers/media/video/tda9840.c

@@ -34,7 +34,7 @@ static int debug = 0;		/* insmod parameter */
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define dprintk(args...) \
-            do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
+            do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
 
 #define	SWITCH		0x00
 #define	LEVEL_ADJUST	0x02

drivers/media/video/tea6415c.c

@@ -36,7 +36,7 @@ static int debug = 0;		/* insmod parameter */
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define dprintk(args...) \
-            do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
+            do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
 
 #define TEA6415C_NUM_INPUTS	8
 #define TEA6415C_NUM_OUTPUTS	6

drivers/media/video/tea6420.c

@@ -36,7 +36,7 @@ static int debug = 0;		/* insmod parameter */
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 #define dprintk(args...) \
-            do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
+            do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
 
 /* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
 static unsigned short normal_i2c[] = { I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END };

include/linux/moduleparam.h

@@ -10,7 +10,7 @@
 #ifdef MODULE
 #define MODULE_PARAM_PREFIX /* empty */
 #else
-#define MODULE_PARAM_PREFIX __stringify(KBUILD_MODNAME) "."
+#define MODULE_PARAM_PREFIX KBUILD_MODNAME "."
 #endif
 
 #ifdef MODULE

include/media/saa7146.h

@@ -21,14 +21,14 @@
 
 extern unsigned int saa7146_debug;
 
-//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),__stringify(KBUILD_MODNAME),__FUNCTION__)
+//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),KBUILD_MODNAME,__FUNCTION__)
 
 #ifndef DEBUG_VARIABLE
 	#define DEBUG_VARIABLE saa7146_debug
 #endif
 
-#define DEBUG_PROLOG printk("%s: %s(): ",__stringify(KBUILD_MODNAME),__FUNCTION__)
-#define INFO(x) { printk("%s: ",__stringify(KBUILD_MODNAME)); printk x; }
+#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME,__FUNCTION__)
+#define INFO(x) { printk("%s: ",KBUILD_MODNAME); printk x; }
 
 #define ERR(x) { DEBUG_PROLOG; printk x; }
 

net/ipv4/netfilter/ip_nat_ftp.c

@@ -171,7 +171,7 @@ static int __init init(void)
 /* Prior to 2.6.11, we had a ports param.  No longer, but don't break users. */
 static int warn_set(const char *val, struct kernel_param *kp)
 {
-	printk(KERN_INFO __stringify(KBUILD_MODNAME)
+	printk(KERN_INFO KBUILD_MODNAME
 	       ": kernel >= 2.6.10 only uses 'ports' for conntrack modules\n");
 	return 0;
 }

net/ipv4/netfilter/ip_nat_irc.c

@@ -113,7 +113,7 @@ static int __init init(void)
 /* Prior to 2.6.11, we had a ports param.  No longer, but don't break users. */
 static int warn_set(const char *val, struct kernel_param *kp)
 {
-	printk(KERN_INFO __stringify(KBUILD_MODNAME)
+	printk(KERN_INFO KBUILD_MODNAME
 	       ": kernel >= 2.6.10 only uses 'ports' for conntrack modules\n");
 	return 0;
 }

scripts/kconfig/Makefile

@@ -133,8 +133,8 @@ HOSTCFLAGS_zconf.tab.o	:= -I$(src)
 HOSTLOADLIBES_qconf	= $(KC_QT_LIBS) -ldl
 HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
 
-HOSTLOADLIBES_gconf	= `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --libs`
-HOSTCFLAGS_gconf.o	= `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --cflags` \
+HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
+HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
                           -D LKC_DIRECT_LINK
 
 $(obj)/qconf.o: $(obj)/.tmp_qtcheck
@@ -193,8 +193,8 @@ ifeq ($(gconf-target),1)
 
 # GTK needs some extra effort, too...
 $(obj)/.tmp_gtkcheck:
-	@if `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --exists`; then		\
-		if `pkg-config gtk+-2.0 --atleast-version=2.0.0`; then			\
+	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then		\
+		if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then			\
 			touch $@;								\
 		else									\
 			echo "*"; 							\

scripts/setlocalversion

-#!/usr/bin/perl
-# Copyright 2004 - Ryan Anderson <ryan@michonline.com>  GPL v2
+#!/bin/sh
+# Print additional version information for non-release trees.
 
-use strict;
-use warnings;
-use Digest::MD5;
-require 5.006;
-
-if (@ARGV != 1) {
-	print <<EOT;
-Usage: setlocalversion <srctree>
-EOT
-	exit(1);
+usage() {
+	echo "Usage: $0 [srctree]" >&2
+	exit 1
 }
 
-my ($srctree) = @ARGV;
-chdir($srctree);
-
-my @LOCALVERSIONS = ();
-
-# We are going to use the following commands to try and determine if this
-# repository is at a Version boundary (i.e, 2.6.10 vs 2.6.10 + some patches) We
-# currently assume that all meaningful version boundaries are marked by a tag.
-# We don't care what the tag is, just that something exists.
-
-# Git/Cogito store the top-of-tree "commit" in .git/HEAD
-# A list of known tags sits in .git/refs/tags/
-#
-# The simple trick here is to just compare the two of these, and if we get a
-# match, return nothing, otherwise, return a subset of the SHA-1 hash in
-# .git/HEAD
-
-sub do_git_checks {
-	open(H,"<.git/HEAD") or return;
-	my $head = <H>;
-	chomp $head;
-	close(H);
+cd "${1:-.}" || usage
 
-	opendir(D,".git/refs/tags") or return;
-	foreach my $tagfile (grep !/^\.{1,2}$/, readdir(D)) {
-		open(F,"<.git/refs/tags/" . $tagfile) or return;
-		my $tag = <F>;
-		chomp $tag;
-		close(F);
-		return if ($tag eq $head);
-	}
-	closedir(D);
-
-	push @LOCALVERSIONS, "g" . substr($head,0,8);
-}
-
-if ( -d ".git") {
-	do_git_checks();
-}
+# Check for git and a git repo.
+if head=`git rev-parse --verify HEAD 2>/dev/null`; then
+	# Do we have an untagged version?
+	if  [ "`git name-rev --tags HEAD`" = "HEAD undefined" ]; then
+		printf '%s%s' -g `echo "$head" | cut -c1-8`
+	fi
 
-printf "-%s\n", join("-",@LOCALVERSIONS) if (scalar @LOCALVERSIONS > 0);
+	# Are there uncommitted changes?
+	if git diff-files | read dummy; then
+		printf '%s' -git_dirty
+	fi
+fi

security/capability.c

@@ -49,8 +49,6 @@ static struct security_operations capability_ops = {
 	.vm_enough_memory =             cap_vm_enough_memory,
 };
 
-#define MY_NAME __stringify(KBUILD_MODNAME)
-
 /* flag to keep track of how we were registered */
 static int secondary;
 
@@ -67,7 +65,7 @@ static int __init capability_init (void)
 	/* register ourselves with the security framework */
 	if (register_security (&capability_ops)) {
 		/* try registering with primary module */
-		if (mod_reg_security (MY_NAME, &capability_ops)) {
+		if (mod_reg_security (KBUILD_MODNAME, &capability_ops)) {
 			printk (KERN_INFO "Failure registering capabilities "
 				"with primary security module.\n");
 			return -EINVAL;
@@ -85,7 +83,7 @@ static void __exit capability_exit (void)
 		return;
 	/* remove ourselves from the security framework */
 	if (secondary) {
-		if (mod_unreg_security (MY_NAME, &capability_ops))
+		if (mod_unreg_security (KBUILD_MODNAME, &capability_ops))
 			printk (KERN_INFO "Failure unregistering capabilities "
 				"with primary module.\n");
 		return;