Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "Mostly driver fixes, but there's a core framework fix in here too:

   - Revert the commits that introduce clk management for the SP clk on
     MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and
     there isn't any need to manage this clk, it just causes more
     headaches.

   - A performance regression that went unnoticed for many years where
     we would traverse the entire clk tree looking for a clk by name
     when we already have the pointer to said clk that we're looking for

   - A parent linkage fix for the qcom SDM845 clk driver

   - An i.MX clk driver rate miscalculation fix where order of
     operations were messed up

   - One error handling fix from the static checkers"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc: Use active only source for CPUSS clocks
  clk: ti: Fix error handling in ti_clk_parse_divider_data()
  clk: imx: Fix fractional clock set rate computation
  clk: Remove global clk traversal on fetch parent index
  Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"
  Revert "clk: mmp2: add SP clock"
  Revert "Input: olpc_apsp - enable the SP clock"

Documentation/devicetree/bindings/serio/olpc,ap-sp.txt

@@ -4,14 +4,10 @@ Required properties:
 - compatible : "olpc,ap-sp"
 - reg : base address and length of SoC's WTM registers
 - interrupts : SP-AP interrupt
-- clocks : phandle + clock-specifier for the clock that drives the WTM
-- clock-names:  should be "sp"
 
 Example:
 	ap-sp@d4290000 {
 		compatible = "olpc,ap-sp";
 		reg = <0xd4290000 0x1000>;
 		interrupts = <40>;
-		clocks = <&soc_clocks MMP2_CLK_SP>;
-		clock-names = "sp";
 	}

drivers/clk/clk.c

@@ -1513,9 +1513,19 @@ static int clk_fetch_parent_index(struct clk_core *core,
 	if (!parent)
 		return -EINVAL;
 
-	for (i = 0; i < core->num_parents; i++)
-		if (clk_core_get_parent_by_index(core, i) == parent)
+	for (i = 0; i < core->num_parents; i++) {
+		if (core->parents[i] == parent)
+			return i;
+
+		if (core->parents[i])
+			continue;
+
+		/* Fallback to comparing globally unique names */
+		if (!strcmp(parent->name, core->parent_names[i])) {
+			core->parents[i] = parent;
 			return i;
+		}
+	}
 
 	return -EINVAL;
 }

drivers/clk/imx/clk-frac-pll.c

@@ -155,13 +155,14 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct clk_frac_pll *pll = to_clk_frac_pll(hw);
 	u32 val, divfi, divff;
-	u64 temp64 = parent_rate;
+	u64 temp64;
 	int ret;
 
 	parent_rate *= 8;
 	rate *= 2;
 	divfi = rate / parent_rate;
-	temp64 *= rate - divfi;
+	temp64 = parent_rate * divfi;
+	temp64 = rate - temp64;
 	temp64 *= PLL_FRAC_DENOM;
 	do_div(temp64, parent_rate);
 	divff = temp64;

drivers/clk/mmp/clk-of-mmp2.c

@@ -53,7 +53,6 @@
 #define APMU_DISP1	0x110
 #define APMU_CCIC0	0x50
 #define APMU_CCIC1	0xf4
-#define APMU_SP		0x68
 #define MPMU_UART_PLL	0x14
 
 struct mmp2_clk_unit {
@@ -210,8 +209,6 @@ static struct mmp_clk_mix_config ccic1_mix_config = {
 	.reg_info = DEFINE_MIX_REG_INFO(4, 16, 2, 6, 32),
 };
 
-static DEFINE_SPINLOCK(sp_lock);
-
 static struct mmp_param_mux_clk apmu_mux_clks[] = {
 	{MMP2_CLK_DISP0_MUX, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 2, 0, &disp0_lock},
 	{MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
@@ -242,7 +239,6 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
-	{MMP2_CLK_SP, "sp_clk", NULL, CLK_SET_RATE_PARENT, APMU_SP, 0x1b, 0x1b, 0x0, 0, &sp_lock},
 };
 
 static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)

drivers/clk/qcom/gcc-sdm845.c

@@ -115,8 +115,8 @@ static const char * const gcc_parent_names_6[] = {
 	"core_bi_pll_test_se",
 };
 
-static const char * const gcc_parent_names_7[] = {
-	"bi_tcxo",
+static const char * const gcc_parent_names_7_ao[] = {
+	"bi_tcxo_ao",
 	"gpll0",
 	"gpll0_out_even",
 	"core_bi_pll_test_se",
@@ -128,6 +128,12 @@ static const char * const gcc_parent_names_8[] = {
 	"core_bi_pll_test_se",
 };
 
+static const char * const gcc_parent_names_8_ao[] = {
+	"bi_tcxo_ao",
+	"gpll0",
+	"core_bi_pll_test_se",
+};
+
 static const struct parent_map gcc_parent_map_10[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GPLL0_OUT_MAIN, 1 },
@@ -210,7 +216,7 @@ static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
 	.freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "gcc_cpuss_ahb_clk_src",
-		.parent_names = gcc_parent_names_7,
+		.parent_names = gcc_parent_names_7_ao,
 		.num_parents = 4,
 		.ops = &clk_rcg2_ops,
 	},
@@ -229,7 +235,7 @@ static struct clk_rcg2 gcc_cpuss_rbcpr_clk_src = {
 	.freq_tbl = ftbl_gcc_cpuss_rbcpr_clk_src,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "gcc_cpuss_rbcpr_clk_src",
-		.parent_names = gcc_parent_names_8,
+		.parent_names = gcc_parent_names_8_ao,
 		.num_parents = 3,
 		.ops = &clk_rcg2_ops,
 	},

drivers/clk/ti/divider.c

@@ -403,8 +403,10 @@ int ti_clk_parse_divider_data(int *div_table, int num_dividers, int max_div,
 	num_dividers = i;
 
 	tmp = kcalloc(valid_div + 1, sizeof(*tmp), GFP_KERNEL);
-	if (!tmp)
+	if (!tmp) {
+		*table = ERR_PTR(-ENOMEM);
 		return -ENOMEM;
+	}
 
 	valid_div = 0;
 	*width = 0;
@@ -439,6 +441,7 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup)
 {
 	struct clk_omap_divider *div;
 	struct clk_omap_reg *reg;
+	int ret;
 
 	if (!setup)
 		return NULL;
@@ -458,6 +461,12 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup)
 		div->flags |= CLK_DIVIDER_POWER_OF_TWO;
 
 	div->table = _get_div_table_from_setup(setup, &div->width);
+	if (IS_ERR(div->table)) {
+		ret = PTR_ERR(div->table);
+		kfree(div);
+		return ERR_PTR(ret);
+	}
+
 
 	div->shift = setup->bit_shift;
 	div->latch = -EINVAL;

drivers/input/serio/olpc_apsp.c

@@ -23,7 +23,6 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/clk.h>
 
 /*
  * The OLPC XO-1.75 and XO-4 laptops do not have a hardware PS/2 controller.
@@ -75,7 +74,6 @@ struct olpc_apsp {
 	struct serio *kbio;
 	struct serio *padio;
 	void __iomem *base;
-	struct clk *clk;
 	int open_count;
 	int irq;
 };
@@ -148,17 +146,11 @@ static int olpc_apsp_open(struct serio *port)
 	struct olpc_apsp *priv = port->port_data;
 	unsigned int tmp;
 	unsigned long l;
-	int error;
 
 	if (priv->open_count++ == 0) {
-		error = clk_prepare_enable(priv->clk);
-		if (error)
-			return error;
-
 		l = readl(priv->base + COMMAND_FIFO_STATUS);
 		if (!(l & CMD_STS_MASK)) {
 			dev_err(priv->dev, "SP cannot accept commands.\n");
-			clk_disable_unprepare(priv->clk);
 			return -EIO;
 		}
 
@@ -179,8 +171,6 @@ static void olpc_apsp_close(struct serio *port)
 		/* Disable interrupt 0 */
 		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
 		writel(tmp | INT_0, priv->base + PJ_INTERRUPT_MASK);
-
-		clk_disable_unprepare(priv->clk);
 	}
 }
 
@@ -208,10 +198,6 @@ static int olpc_apsp_probe(struct platform_device *pdev)
 	if (priv->irq < 0)
 		return priv->irq;
 
-	priv->clk = devm_clk_get(&pdev->dev, "sp");
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
-
 	/* KEYBOARD */
 	kb_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
 	if (!kb_serio)

include/dt-bindings/clock/marvell,mmp2.h

@@ -71,7 +71,6 @@
 #define MMP2_CLK_CCIC1_MIX		117
 #define MMP2_CLK_CCIC1_PHY		118
 #define MMP2_CLK_CCIC1_SPHY		119
-#define MMP2_CLK_SP			120
 
 #define MMP2_NR_CLKS			200
 #endif