Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...

Documentation/devicetree/bindings/crypto/mv_cesa.txt

+Marvell Cryptographic Engines And Security Accelerator
+
+Required properties:
+- compatible : should be "marvell,orion-crypto"
+- reg : base physical address of the engine and length of memory mapped
+        region, followed by base physical address of sram and its memory
+        length
+- reg-names : "regs" , "sram";
+- interrupts : interrupt number
+
+Examples:
+
+	crypto@30000 {
+		compatible = "marvell,orion-crypto";
+		reg = <0x30000 0x10000>,
+		      <0x4000000 0x800>;
+		reg-names = "regs" , "sram";
+		interrupts = <22>;
+		status = "okay";
+	};

Documentation/devicetree/bindings/gpio/gpio-fan.txt

+Bindings for fan connected to GPIO lines
+
+Required properties:
+- compatible : "gpio-fan"
+- gpios: Specifies the pins that map to bits in the control value,
+  ordered MSB-->LSB.
+- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
+  control value that should be set to achieve them. This array
+  must have the RPM values in ascending order.
+
+Optional properties:
+- alarm-gpios: This pin going active indicates something is wrong with
+  the fan, and a udev event will be fired.
+
+Examples:
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+		alarm-gpios = <&gpio1 15 1>;
+	};

Documentation/devicetree/bindings/gpio/gpio-mvebu.txt

+* Marvell EBU GPIO controller
+
+Required properties:
+
+- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio"
+  or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for
+  Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada
+  370. "marvell,mv78200-gpio" should be used for the Discovery
+  MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP
+  SoCs (MV78230, MV78260, MV78460).
+
+- reg: Address and length of the register set for the device. Only one
+  entry is expected, except for the "marvell,armadaxp-gpio" variant
+  for which two entries are expected: one for the general registers,
+  one for the per-cpu registers.
+
+- interrupts: The list of interrupts that are used for all the pins
+  managed by this GPIO bank. There can be more than one interrupt
+  (example: 1 interrupt per 8 pins on Armada XP, which means 4
+  interrupts per bank of 32 GPIOs).
+
+- interrupt-controller: identifies the node as an interrupt controller
+
+- #interrupt-cells: specifies the number of cells needed to encode an
+  interrupt source. Should be two.
+  The first cell is the GPIO number.
+  The second cell is used to specify flags:
+    bits[3:0] trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+
+- gpio-controller: marks the device node as a gpio controller
+
+- ngpios: number of GPIOs this controller has
+
+- #gpio-cells: Should be two. The first cell is the pin number. The
+  second cell is reserved for flags, unused at the moment.
+
+Example:
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};

Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt

+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, uart0(rxd)
+mpp1          1        gpo, uart0(txd)
+mpp2          2        gpio, i2c0(sck), uart0(txd)
+mpp3          3        gpio, i2c0(sda), uart0(rxd)
+mpp4          4        gpio, cpu_pd(vdd)
+mpp5          5        gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7          7        gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11         11       gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+                       sata1(prsnt), spi1(cs1)
+mpp12         12       gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp13         13       gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+                       audio(rmclk)
+mpp14         14       gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+                       spi0(cs2)
+mpp15         15       gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+                       spi0(cs3)
+mpp16         16       gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17         17       gpo, ge(mdc)
+mpp18         18       gpio, ge(mdio)
+mpp19         19       gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20         20       gpo, ge0(txd4), ge1(txd0)
+mpp21         21       gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22         22       gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23         23       gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24         24       gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25         25       gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26         26       gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27         27       gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28         28       gpio, ge0(rxd5), ge1(rxd3)
+mpp29         29       gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31         31       gpio, tclk, ge0(txerr)
+mpp32         32       gpio, spi0(cs0)
+mpp33         33       gpio, dev(bootcs), spi0(cs0)
+mpp34         34       gpo, dev(wen0), spi0(mosi)
+mpp35         35       gpo, dev(oen), spi0(sck)
+mpp36         36       gpo, dev(a1), spi0(miso)
+mpp37         37       gpo, dev(a0), sata0(prsnt)
+mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39         39       gpo, dev(ad0), audio(spdifo)
+mpp40         40       gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41         41       gpio, dev(ad2), uart1(rxd)
+mpp42         42       gpo, dev(ad3), uart1(txd)
+mpp43         43       gpo, dev(ad4), audio(bclk)
+mpp44         44       gpo, dev(ad5), audio(mclk)
+mpp45         45       gpo, dev(ad6), audio(lrclk)
+mpp46         46       gpo, dev(ad7), audio(sdo)
+mpp47         47       gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48         48       gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+                       spi0(cs1)
+mpp49         49       gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp50         50       gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+                       audio(rmclk)
+mpp51         51       gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52         52       gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53         53       gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+                       pcie(clkreq1)
+mpp54         54       gpo, dev(ad15), tdm(dtx)
+mpp55         55       gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+                       sata0(prsnt)
+mpp56         56       gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+                       pcie(clkreq0), spi1(cs1)
+mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+                       audio(sdo)
+mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+                       uart0(rts)
+mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+                       audio(sdi)
+mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+                       audio(mclk), uart0(cts)
+mpp63         63       gpo, spi0(sck), tclk
+mpp64         64       gpio, spi0(miso), spi0-1(cs1)
+mpp65         65       gpio, spi0(mosi), spi0-1(cs2)

Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt

+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+              "marvell,mv78460-pinctrl"
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ge0(txclko), lcd(d0)
+mpp1          1        gpio, ge0(txd0), lcd(d1)
+mpp2          2        gpio, ge0(txd1), lcd(d2)
+mpp3          3        gpio, ge0(txd2), lcd(d3)
+mpp4          4        gpio, ge0(txd3), lcd(d4)
+mpp5          5        gpio, ge0(txctl), lcd(d5)
+mpp6          6        gpio, ge0(rxd0), lcd(d6)
+mpp7          7        gpio, ge0(rxd1), lcd(d7)
+mpp8          8        gpio, ge0(rxd2), lcd(d8)
+mpp9          9        gpio, ge0(rxd3), lcd(d9)
+mpp10         10       gpio, ge0(rxctl), lcd(d10)
+mpp11         11       gpio, ge0(rxclk), lcd(d11)
+mpp12         12       gpio, ge0(txd4), ge1(txd0), lcd(d12)
+mpp13         13       gpio, ge0(txd5), ge1(txd1), lcd(d13)
+mpp14         14       gpio, ge0(txd6), ge1(txd2), lcd(d15)
+mpp15         15       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp16         16       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp17         17       gpio, ge0(col), ge1(txctl), lcd(d17)
+mpp18         18       gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19         19       gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
+mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp30         30       gpio, tdm(int1), sd0(clk)
+mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
+mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
+mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
+mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36         36       gpio, spi(mosi)
+mpp37         37       gpio, spi(miso)
+mpp38         38       gpio, spi(sck)
+mpp39         39       gpio, spi(cs0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
+                       pcie(clkreq0)
+mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+                       pcie(clkreq1)
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
+                       vdd(cpu0-pd)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
+                       vdd(cpu2-3-pd){1}
+mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
+                       mem(bat)
+mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
+mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
+mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
+                       ref(clkout)
+mpp48         48       gpio, tclk, dev(burst/last)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name          pins     functions
+================================================================================
+mpp49         49       gpio, dev(we3)
+mpp50         50       gpio, dev(we2)
+mpp51         51       gpio, dev(ad16)
+mpp52         52       gpio, dev(ad17)
+mpp53         53       gpio, dev(ad18)
+mpp54         54       gpio, dev(ad19)
+mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
+mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
+mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp58         58       gpio, dev(ad23)
+mpp59         59       gpio, dev(ad24)
+mpp60         60       gpio, dev(ad25)
+mpp61         61       gpio, dev(ad26)
+mpp62         62       gpio, dev(ad27)
+mpp63         63       gpio, dev(ad28)
+mpp64         64       gpio, dev(ad29)
+mpp65         65       gpio, dev(ad30)
+mpp66         66       gpio, dev(ad31)
+
+Notes:
+* {1} vdd(cpu2-3-pd) only available on mv78460.

Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt

+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+                       uart1(rts)
+mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+                       uart1(cts), lcd-spi(cs1)
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
+mpp8          8        gpio, pmu, watchdog(rstout)
+mpp9          9        gpio, pmu, pex1(clkreq)
+mpp10         10       gpio, pmu, ssp(sclk)
+mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+                       sdio1(ledctrl), pex0(clkreq)
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+                       ssp(extclk)
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+                       ac97-1(sysclko)
+mpp18         18       gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19         19       gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+                       ac97(sysclko)
+mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+                       uart1(cts), ssp(sfrm)
+mpp22         22       gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+                       lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23         23       gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+                       lcd-spi(sck), ssp(sclk)
+mpp_camera    24-39    gpio, camera
+mpp_sdio0     40-45    gpio, sdio0
+mpp_sdio1     46-51    gpio, sdio1
+mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+                       ssp/twsi
+mpp_spi0      58-61    gpio, spi0
+mpp_uart1     62-63    gpio, uart1
+mpp_nand      64-71    gpo, nand
+audio0        -        i2s, ac97
+twsi          -        none, opt1, opt2, opt3
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+  - gpio          : gpio on pins 52-57
+  - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+  - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
+  - spdifo        : spdifo on pin 57, gpio on pins 52-55
+  - twsi          : twsi on pins 56,57, gpio on pins 52-55
+  - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
+  - ssp           : ssp on pins 52-55, gpio on pins 56,57
+  - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+  audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.

Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt

+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial@12100 {
+	compatible = "ns16550a";
+	reg = <0x12100 0x100>;
+	reg-shift = <2>;
+	interrupts = <7>;
+
+	pinctrl-0 = <&pmx_uart1_sw>;
+	pinctrl-names = "default";
+};
+
+pinctrl: pinctrl@d0200 {
+	compatible = "marvell,dove-pinctrl";
+	reg = <0xd0200 0x20>;
+
+	pmx_uart1_sw: pmx-uart1-sw {
+		marvell,pins = "mpp_uart1";
+		marvell,function = "uart1";
+	};
+};

arch/arm/Kconfig

@@ -529,10 +529,11 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_V7
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
+	select MIGHT_HAVE_PCI
+	select PLAT_ORION_LEGACY
+	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -542,7 +543,7 @@ config ARCH_KIRKWOOD
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -568,7 +569,7 @@ config ARCH_MV78XX0
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -580,7 +581,7 @@ config ARCH_ORION5X
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -1138,6 +1139,10 @@ config PLAT_ORION
 	select IRQ_DOMAIN
 	select COMMON_CLK
 
+config PLAT_ORION_LEGACY
+	bool
+	select PLAT_ORION
+
 config PLAT_PXA
 	bool
 

arch/arm/boot/dts/Makefile

@@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
 	usb_a9263.dtb \
 	usb_a9g20.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
@@ -33,10 +36,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
 dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-ib62x0.dtb \
 	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-km_kirkwood.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-ts219-6281.dtb \

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -63,6 +63,11 @@ timer@d0020300 {
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
 		};
+
+		addr-decoding@d0020000 {
+			compatible = "marvell,armada-addr-decoding-controller";
+			reg = <0xd0020000 0x258>;
+		};
 	};
 };
 

arch/arm/boot/dts/armada-370.dtsi

@@ -21,6 +21,12 @@ / {
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
 	mpic: interrupt-controller@d0020000 {
 	      reg = <0xd0020a00 0x1d0>,
 		    <0xd0021870 0x58>;
@@ -31,5 +37,43 @@ system-controller@d0018200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+		pinctrl {
+			compatible = "marvell,mv88f6710-pinctrl";
+			reg = <0xd0018000 0x38>;
+	        };
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <82>, <83>, <84>, <85>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <87>, <88>, <89>, <90>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
+			ngpios = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <91>;
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-db.dts

@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";

arch/arm/boot/dts/armada-xp-mv78230.dtsi

+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78230-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <17>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>;
+		};
+	};
+};

arch/arm/boot/dts/armada-xp-mv78260.dtsi

+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78260-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+};

arch/arm/boot/dts/armada-xp-mv78460.dtsi

+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78460-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+ };

arch/arm/boot/dts/dove-cm-a510.dts

+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};

arch/arm/boot/dts/dove-cubox.dts

+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};

arch/arm/boot/dts/dove-dove-db.dts

+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};

arch/arm/boot/dts/dove.dtsi

+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
+
+	mbus@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0 0xf1000000 0x4000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <7>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <8>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart2: serial@12200 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <9>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart3: serial@12300 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <10>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		wdt: wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+		};
+
+		gpio0: gpio@d0400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0400 0x20>;
+			ngpio = <32>;
+			interrupts = <12>, <13>, <14>, <60>;
+		};
+
+		gpio1: gpio@d0420 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0420 0x20>;
+			ngpio = <32>;
+			interrupts = <61>;
+		};
+
+		gpio2: gpio@e8400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe8400 0x0c>;
+			ngpio = <8>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <6>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		spi1: spi@14600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <5>;
+			reg = <0x14600 0x28>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clock-frequency = <400000>;
+			timeout-ms = <1000>;
+			status = "disabled";
+		};
+
+		sdio0: sdio@92000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x92000 0x100>;
+			interrupts = <35>, <37>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@90000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x90000 0x100>;
+			interrupts = <36>, <38>;
+			status = "disabled";
+		};
+
+		sata0: sata@a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xa0000 0x2400>;
+			interrupts = <62>;
+			nr-ports = <1>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -25,6 +25,16 @@ button@3 {
 		};
 	};
 
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
 	ocp@f1000000 {
 		sata@80000 {
 			status = "okay";

arch/arm/boot/dts/kirkwood-dockstar.dts

+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -12,7 +12,7 @@ memory {
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
 		linux,initrd-start = <0x4500040>;
 		linux,initrd-end   = <0x4800000>;
 	};
@@ -30,7 +30,37 @@ serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0xc0000>;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			partition@100000 {
+				label = "zImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@540000 {
+				label = "initrd";
+				reg = <0x540000 0x300000>;
+			};
+
+			partition@980000 {
+				label = "boot";
+				reg = <0x980000 0x1f400000>;
+			};
+		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -69,4 +99,22 @@ otb {
 			gpios = <&gpio1 16 0>;
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+			debounce-interval = <100>;
+		};
+	};
 };

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@400000 {
+				label = "uInitrd";
+				reg = <0x540000 0x1000000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 0>;
+			linux,default-trigger = "default-on";
+		};
+		health_led1 {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 0>;
+		};
+		health_led2 {
+			label = "status:white:health_led";
+			gpios = <&gpio1 4 0>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 0>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		Power {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio0 14 1>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "ok";
+			chip-delay = <25>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood.dtsi

@@ -14,7 +14,8 @@ intc: interrupt-controller {
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
+		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -105,5 +106,14 @@ i2c@11000 {
 			clock-frequency = <100000>;
 			status = "disabled";
 		};
+
+		crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xf5000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			status = "okay";
+		};
 	};
 };

arch/arm/configs/kirkwood_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -15,9 +17,19 @@ CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_ESATA_SHEEVAPLUG=y
 CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_DOCKSTAR=y
+CONFIG_MACH_DREAMPLUG_DT=y
+CONFIG_MACH_ICONNECT_DT=y
+CONFIG_MACH_DLINK_KIRKWOOD_DT=y
+CONFIG_MACH_IB62X0_DT=y
+CONFIG_MACH_TS219_DT=y
+CONFIG_MACH_DOCKSTAR_DT=y
+CONFIG_MACH_GOFLEXNET_DT=y
+CONFIG_MACH_LSXL_DT=y
+CONFIG_MACH_IOMEGA_IX2_200_DT=y
+CONFIG_MACH_KM_KIRKWOOD_DT=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
+CONFIG_MACH_DOCKSTAR=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
 CONFIG_MACH_OPENRD_ULTIMATE=y
@@ -29,8 +41,6 @@ CONFIG_MACH_NET2BIG_V2=y
 CONFIG_MACH_NET5BIG_V2=y
 CONFIG_MACH_T5325=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
@@ -47,13 +57,11 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -69,7 +77,6 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -78,22 +85,21 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_NET_PCI=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
+CONFIG_MARVELL_PHY=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
@@ -103,7 +109,8 @@ CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
@@ -119,10 +126,8 @@ CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_PRINTER=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
@@ -148,7 +153,6 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -158,7 +162,6 @@ CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
@@ -171,11 +174,8 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m

arch/arm/configs/mvebu_defconfig

@@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set

arch/arm/mach-dove/Kconfig

@@ -15,6 +15,13 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
+config MACH_DOVE_DT
+	bool "Marvell Dove Flattened Device Tree"
+	select USE_OF
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
 endmenu
 
 endif

arch/arm/mach-dove/Makefile

-obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
-
+obj-y				+= common.o addr-map.o irq.o mpp.o
+obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o

arch/arm/mach-dove/common.c

@@ -16,6 +16,8 @@
 #include <linux/clk-provider.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@@ -24,6 +26,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/pci.h>
 #include <mach/dove.h>
+#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
@@ -33,19 +36,17 @@
 #include <plat/addr-map.h>
 #include "common.h"
 
-static int get_tclk(void);
-
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
 static struct map_desc dove_io_desc[] __initdata = {
 	{
-		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_SB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
 		.length		= DOVE_SB_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_NB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
 		.length		= DOVE_NB_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -60,14 +61,69 @@ void __init dove_map_io(void)
 /*****************************************************************************
  * CLK tree
  ****************************************************************************/
+static int dove_tclk;
+
+static DEFINE_SPINLOCK(gating_lock);
 static struct clk *tclk;
 
-static void __init clk_init(void)
+static struct clk __init *dove_register_gate(const char *name,
+					     const char *parent, u8 bit_idx)
 {
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       get_tclk());
+	return clk_register_gate(NULL, name, parent, 0,
+				 (void __iomem *)CLOCK_GATING_CONTROL,
+				 bit_idx, 0, &gating_lock);
+}
+
+static void __init dove_clk_init(void)
+{
+	struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
+	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
+	struct clk *xor0, *xor1, *ge, *gephy;
 
-	orion_clkdev_init(tclk);
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       dove_tclk);
+
+	usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
+	usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
+	sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA);
+	pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0);
+	pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1);
+	sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0);
+	sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1);
+	nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND);
+	camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA);
+	i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0);
+	i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1);
+	crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO);
+	ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97);
+	pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
+	xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
+	xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
+	gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+	ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
+
+	orion_clkdev_add(NULL, "orion_spi.0", tclk);
+	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk);
+
+	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+	orion_clkdev_add(NULL, "orion-ehci.1", usb1);
+	orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
+	orion_clkdev_add("0", "sata_mv.0", sata);
+	orion_clkdev_add("0", "pcie", pex0);
+	orion_clkdev_add("1", "pcie", pex1);
+	orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
+	orion_clkdev_add(NULL, "sdhci-dove.1", sdio1);
+	orion_clkdev_add(NULL, "orion_nand", nand);
+	orion_clkdev_add(NULL, "cafe1000-ccic.0", camera);
+	orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0);
+	orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1);
+	orion_clkdev_add(NULL, "mv_crypto", crypto);
+	orion_clkdev_add(NULL, "dove-ac97", ac97);
+	orion_clkdev_add(NULL, "dove-pdma", pdma);
+	orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
+	orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
 }
 
 /*****************************************************************************
@@ -178,22 +234,31 @@ void __init dove_init_early(void)
 	orion_time_set_base(TIMER_VIRT_BASE);
 }
 
-static int get_tclk(void)
+static int __init dove_find_tclk(void)
 {
-	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
 	return 166666667;
 }
 
 static void __init dove_timer_init(void)
 {
+	dove_tclk = dove_find_tclk();
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_DOVE_BRIDGE, get_tclk());
+			IRQ_DOVE_BRIDGE, dove_tclk);
 }
 
 struct sys_timer dove_timer = {
 	.init = dove_timer_init,
 };
 
+/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+void __init dove_crypto_init(void)
+{
+	orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
+			  DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
+}
+
 /*****************************************************************************
  * XOR 0
  ****************************************************************************/
@@ -275,8 +340,8 @@ void __init dove_sdio1_init(void)
 
 void __init dove_init(void)
 {
-	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
@@ -284,7 +349,7 @@ void __init dove_init(void)
 	dove_setup_cpu_mbus();
 
 	/* Setup root of clk tree */
-	clk_init();
+	dove_clk_init();
 
 	/* internal devices that every board has */
 	dove_rtc_init();
@@ -307,3 +372,67 @@ void dove_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
+
+#if defined(CONFIG_MACH_DOVE_DT)
+/*
+ * Auxdata required until real OF clock provider
+ */
+struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
+	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+		       NULL),
+	OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
+	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
+	{},
+};
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+		(dove_tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	/* Setup root of clk tree */
+	dove_clk_init();
+
+	/* Internal devices not ported to DT yet */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+
+	dove_ge00_init(&dove_dt_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_pcie_init(1, 1);
+	dove_crypto_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     dove_auxdata_lookup, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+	"marvell,dove",
+	NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+	.map_io		= dove_map_io,
+	.init_early	= dove_init_early,
+	.init_irq	= orion_dt_init_irq,
+	.timer		= &dove_timer,
+	.init_machine	= dove_dt_init,
+	.restart	= dove_restart,
+	.dt_compat	= dove_dt_board_compat,
+MACHINE_END
+#endif

arch/arm/mach-dove/common.h

@@ -26,7 +26,11 @@ void dove_init_irq(void);
 void dove_setup_cpu_mbus(void);
 void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void dove_sata_init(struct mv_sata_platform_data *sata_data);
+#ifdef CONFIG_PCI
 void dove_pcie_init(int init_port0, int init_port1);
+#else
+static inline void dove_pcie_init(int init_port0, int init_port1) { }
+#endif
 void dove_ehci0_init(void);
 void dove_ehci1_init(void);
 void dove_uart0_init(void);

arch/arm/mach-dove/include/mach/bridge-regs.h

@@ -13,22 +13,22 @@
 
 #include <mach/dove.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0000)
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define  CPU_CTRL_PCIE0_LINK	0x00000001
 #define  CPU_RESET		0x00000002
 #define  CPU_CTRL_PCIE1_LINK	0x00000008
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define  SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define  SOFT_RESET		0x00000001
 
 #define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define FIQ_MASK_LOW_OFF	0x0008
@@ -47,9 +47,9 @@
 #define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
 #define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
 
-#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE + 0x011c)
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE + 0x0300)
 
 #endif

arch/arm/mach-dove/include/mach/dove.h

@@ -25,7 +25,7 @@
  */
 
 #define DOVE_CESA_PHYS_BASE		0xc8000000
-#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_VIRT_BASE		IOMEM(0xfdb00000)
 #define DOVE_CESA_SIZE			SZ_1M
 
 #define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
@@ -38,15 +38,15 @@
 #define DOVE_BOOTROM_SIZE		SZ_128M
 
 #define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
-#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_VIRT_BASE	IOMEM(0xfdd00000)
 #define DOVE_SCRATCHPAD_SIZE		SZ_1M
 
 #define DOVE_SB_REGS_PHYS_BASE		0xf1000000
-#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_VIRT_BASE		IOMEM(0xfde00000)
 #define DOVE_SB_REGS_SIZE		SZ_8M
 
 #define DOVE_NB_REGS_PHYS_BASE		0xf1800000
-#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_VIRT_BASE		IOMEM(0xfe600000)
 #define DOVE_NB_REGS_SIZE		SZ_8M
 
 #define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
@@ -62,75 +62,75 @@
  */
 
 /* SPI, I2C, UART */
-#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
-#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
-#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
-#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
-#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
-#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
-#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
-#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
-#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
-#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
-#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x14600)
 
 /* North-South Bridge */
-#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x20000)
 
 /* Cryptographic Engine */
-#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x30000)
 
 /* PCIe 0 */
-#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x40000)
 
 /* USB */
-#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
-#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x51000)
 
 /* XOR 0 Engine */
-#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
-#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
-#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
-#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60A00)
 
 /* XOR 1 Engine */
-#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
-#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
-#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
-#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60B00)
 
 /* Gigabit Ethernet */
-#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x70000)
 
 /* PCIe 1 */
-#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x80000)
 
 /* CAFE */
-#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
-#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
-#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
-#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x98000)
 
 /* SATA */
-#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xa0000)
 
 /* I2S/SPDIF */
-#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
-#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb4000)
 
 /* NAND Flash Controller */
-#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xc0000)
 
 /* MPP, GPIO, Reset Sampling */
-#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
 #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
-#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
-#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
-#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0420)
-#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
-#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE + 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE + 0x018)
+#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0400)
+#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0420)
+#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE + 0xe8400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
 #define  DOVE_NAND_GPIO_EN		(1 << 0)
 #define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
@@ -142,44 +142,44 @@
 #define  DOVE_SD0_GPIO_SEL		(1 << 0)
 
 /* Power Management */
-#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0000)
 #define DOVE_PMU_SIG_CTRL	(DOVE_PMU_VIRT_BASE + 0x802c)
 
 /* Real Time Clock */
-#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xd8500)
 
 /* AC97 */
-#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
-#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe0000)
 
 /* Peripheral DMA */
-#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
-#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe4000)
 
-#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
-#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE + 0xe8030)
 #define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
 #define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
 #define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
-#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
-#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE + 0xe8034)
 #define  DOVE_SSP_ON_AU1		(1 << 0)
 #define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
 #define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
 /* Memory Controller */
-#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE + 0x00000)
 
 /* LCD Controller */
-#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
-#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x30000)
 
 /* Graphic Engine */
-#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x40000)
 
 /* Video Engine */
-#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x400000)
 
 #endif

arch/arm/mach-dove/include/mach/pm.h

@@ -13,24 +13,42 @@
 #include <mach/irqs.h>
 
 #define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
-#define  CLOCK_GATING_USB0_MASK		(1 << 0)
-#define  CLOCK_GATING_USB1_MASK		(1 << 1)
-#define  CLOCK_GATING_GBE_MASK		(1 << 2)
-#define  CLOCK_GATING_SATA_MASK		(1 << 3)
-#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
-#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
-#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
-#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
-#define  CLOCK_GATING_NAND_MASK		(1 << 10)
-#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
-#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
-#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
-#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
-#define  CLOCK_GATING_AC97_MASK		(1 << 21)
-#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
-#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
-#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
-#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+#define  CLOCK_GATING_BIT_USB0		0
+#define  CLOCK_GATING_BIT_USB1		1
+#define  CLOCK_GATING_BIT_GBE		2
+#define  CLOCK_GATING_BIT_SATA		3
+#define  CLOCK_GATING_BIT_PCIE0		4
+#define  CLOCK_GATING_BIT_PCIE1		5
+#define  CLOCK_GATING_BIT_SDIO0		8
+#define  CLOCK_GATING_BIT_SDIO1		9
+#define  CLOCK_GATING_BIT_NAND		10
+#define  CLOCK_GATING_BIT_CAMERA	11
+#define  CLOCK_GATING_BIT_I2S0		12
+#define  CLOCK_GATING_BIT_I2S1		13
+#define  CLOCK_GATING_BIT_CRYPTO	15
+#define  CLOCK_GATING_BIT_AC97		21
+#define  CLOCK_GATING_BIT_PDMA		22
+#define  CLOCK_GATING_BIT_XOR0		23
+#define  CLOCK_GATING_BIT_XOR1		24
+#define  CLOCK_GATING_BIT_GIGA_PHY	30
+#define  CLOCK_GATING_USB0_MASK		(1 << CLOCK_GATING_BIT_USB0)
+#define  CLOCK_GATING_USB1_MASK		(1 << CLOCK_GATING_BIT_USB1)
+#define  CLOCK_GATING_GBE_MASK		(1 << CLOCK_GATING_BIT_GBE)
+#define  CLOCK_GATING_SATA_MASK		(1 << CLOCK_GATING_BIT_SATA)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << CLOCK_GATING_BIT_PCIE0)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << CLOCK_GATING_BIT_PCIE1)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << CLOCK_GATING_BIT_SDIO0)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << CLOCK_GATING_BIT_SDIO1)
+#define  CLOCK_GATING_NAND_MASK		(1 << CLOCK_GATING_BIT_NAND)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << CLOCK_GATING_BIT_CAMERA)
+#define  CLOCK_GATING_I2S0_MASK		(1 << CLOCK_GATING_BIT_I2S0)
+#define  CLOCK_GATING_I2S1_MASK		(1 << CLOCK_GATING_BIT_I2S1)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << CLOCK_GATING_BIT_CRYPTO)
+#define  CLOCK_GATING_AC97_MASK		(1 << CLOCK_GATING_BIT_AC97)
+#define  CLOCK_GATING_PDMA_MASK		(1 << CLOCK_GATING_BIT_PDMA)
+#define  CLOCK_GATING_XOR0_MASK		(1 << CLOCK_GATING_BIT_XOR0)
+#define  CLOCK_GATING_XOR1_MASK		(1 << CLOCK_GATING_BIT_XOR1)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
 #define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)

arch/arm/mach-dove/irq.c

@@ -100,19 +100,19 @@ void __init dove_init_irq(void)
 {
 	int i;
 
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 
 	/*

arch/arm/mach-dove/pcie.c

@@ -182,18 +182,18 @@ static struct hw_pci dove_pci __initdata = {
 	.map_irq	= dove_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Dove PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
 
 		printk(KERN_INFO "link up\n");
 
 		pp->index = index;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
 		memset(&pp->res, 0, sizeof(pp->res));
 	} else {

arch/arm/mach-kirkwood/Kconfig

@@ -94,6 +94,13 @@ config MACH_TS219_DT
 	  or MV6282. If you have the wrong one, the buttons will not
 	  work.
 
+config MACH_DOCKSTAR_DT
+	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent Dockstar (Flattened Device Tree).
+
 config MACH_GOFLEXNET_DT
 	bool "Seagate GoFlex Net (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -109,6 +116,20 @@ config MACH_LSXL_DT
 	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
 	  Flattened Device Tree.
 
+config MACH_IOMEGA_IX2_200_DT
+	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Iomega StorCenter ix2-200 (Flattened Device Tree).
+
+config MACH_KM_KIRKWOOD_DT
+	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help

arch/arm/mach-kirkwood/Makefile

@@ -26,5 +26,8 @@ obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
 obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
 obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
+obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
+obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o

arch/arm/mach-kirkwood/addr-map.c

@@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void)
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    (void __iomem *) DDR_WINDOW_CPU_BASE);
 }

arch/arm/mach-kirkwood/board-dnskw.c

@@ -14,18 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
 #include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio-fan.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -67,29 +57,6 @@ static unsigned int dnskw_mpp_config[] __initdata = {
 	0
 };
 
-/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-static struct gpio_fan_speed dnskw_fan_speed[] = {
-	{    0,  0 },
-	{ 3000,	 1 },
-	{ 6000,	 2 },
-};
-static unsigned dnskw_fan_pins[] = {46, 45};
-
-static struct gpio_fan_platform_data dnskw_fan_data = {
-	.num_ctrl	= ARRAY_SIZE(dnskw_fan_pins),
-	.ctrl		= dnskw_fan_pins,
-	.num_speed	= ARRAY_SIZE(dnskw_fan_speed),
-	.speed		= dnskw_fan_speed,
-};
-
-static struct platform_device dnskw_fan_device = {
-	.name	= "gpio-fan",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dnskw_fan_data,
-	},
-};
-
 static void dnskw_power_off(void)
 {
 	gpio_set_value(36, 1);
@@ -114,8 +81,6 @@ void __init dnskw_init(void)
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&dnskw_ge00_data);
 
-	platform_device_register(&dnskw_fan_device);
-
 	/* Register power-off GPIO. */
 	if (gpio_request(36, "dnskw:power:off") == 0
 	    && gpio_direction_output(36, 0) == 0)

arch/arm/mach-kirkwood/board-dockstar.c

+/*
+ * arch/arm/mach-kirkwood/board-dockstar.c
+ *
+ * Seagate FreeAgent Dockstar Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Copied and modified for Seagate GoFlex Net support by
+ * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
+ * GoFlex kernel patches.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+void __init dockstar_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+}

arch/arm/mach-kirkwood/board-dt.c

@@ -33,6 +33,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
 	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
 	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
+	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
 	{},
 };
 
@@ -60,7 +61,6 @@ static void __init kirkwood_dt_init(void)
 	/* internal devices that every board has */
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
-	kirkwood_crypto_init();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
@@ -81,12 +81,21 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("qnap,ts219"))
 		qnap_dt_ts219_init();
 
+	if (of_machine_is_compatible("seagate,dockstar"))
+		dockstar_dt_init();
+
 	if (of_machine_is_compatible("seagate,goflexnet"))
 		goflexnet_init();
 
 	if (of_machine_is_compatible("buffalo,lsxl"))
 		lsxl_init();
 
+	if (of_machine_is_compatible("iom,ix2-200"))
+		iomega_ix2_200_init();
+
+	if (of_machine_is_compatible("keymile,km_kirkwood"))
+		km_kirkwood_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table,
 			     kirkwood_auxdata_lookup, NULL);
 }
@@ -98,8 +107,11 @@ static const char *kirkwood_dt_board_compat[] = {
 	"iom,iconnect",
 	"raidsonic,ib-nas62x0",
 	"qnap,ts219",
+	"seagate,dockstar",
 	"seagate,goflexnet",
 	"buffalo,lsxl",
+	"iom,ix2-200",
+	"keymile,km_kirkwood",
 	NULL
 };
 

arch/arm/mach-kirkwood/board-iconnect.c

@@ -16,11 +16,8 @@
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
@@ -44,57 +41,12 @@ static unsigned int iconnect_mpp_config[] __initdata = {
 	0
 };
 
-static struct mtd_partition iconnect_nand_parts[] = {
-	{
-		.name = "flash",
-		.offset = 0,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-/* yikes... theses are the original input buttons */
-/* but I'm not convinced by the sw event choices  */
-static struct gpio_keys_button iconnect_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= SW_LID,
-		.gpio		= 12,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	}, {
-		.type		= EV_SW,
-		.code		= SW_TABLET_MODE,
-		.gpio		= 35,
-		.desc		= "OTB Button",
-		.active_low	= 1,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-	.buttons	= iconnect_buttons,
-	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev        = {
-		.platform_data  = &iconnect_button_data,
-	},
-};
-
 void __init iconnect_init(void)
 {
 	kirkwood_mpp_conf(iconnect_mpp_config);
-	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&iconnect_ge00_data);
-
-	platform_device_register(&iconnect_button_device);
 }
 
 static int __init iconnect_pci_init(void)

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

+/*
+ * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+ *
+ * Iomega StorCenter ix2-200
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
+	.phy_addr       = MV643XX_ETH_PHY_NONE,
+	.speed          = SPEED_1000,
+	.duplex         = DUPLEX_FULL,
+};
+
+static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
+	MPP12_GPIO,			/* Reset Button */
+	MPP14_GPIO,			/* Power Button */
+	MPP15_GPIO,			/* Backup LED (blue) */
+	MPP16_GPIO,			/* Power LED (white) */
+	MPP35_GPIO,			/* OTB Button */
+	MPP36_GPIO,			/* Rebuild LED (white) */
+	MPP37_GPIO,			/* Health LED (red) */
+	MPP38_GPIO,			/* SATA LED brightness control 1 */
+	MPP39_GPIO,			/* SATA LED brightness control 2 */
+	MPP40_GPIO,			/* Backup LED brightness control 1 */
+	MPP41_GPIO,			/* Backup LED brightness control 2 */
+	MPP42_GPIO,			/* Power LED brightness control 1 */
+	MPP43_GPIO,			/* Power LED brightness control 2 */
+	MPP44_GPIO,			/* Health LED brightness control 1 */
+	MPP45_GPIO,			/* Health LED brightness control 2 */
+	MPP46_GPIO,			/* Rebuild LED brightness control 1 */
+	MPP47_GPIO,			/* Rebuild LED brightness control 2 */
+	0
+};
+
+void __init iomega_ix2_200_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+}

arch/arm/mach-kirkwood/board-km_kirkwood.c

+/*
+ * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * arch/arm/mach-kirkwood/board-km_kirkwood.c
+ *
+ * Keymile km_kirkwood Reference Desing Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int km_kirkwood_mpp_config[] __initdata = {
+	MPP8_GPIO,	/* I2C SDA */
+	MPP9_GPIO,	/* I2C SCL */
+	0
+};
+
+void __init km_kirkwood_init(void)
+{
+	struct clk *sata_clk;
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(km_kirkwood_mpp_config);
+
+	/*
+	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
+	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
+	 * devices are also not present in this variant, their clocks get
+	 * disabled because unused when clk_disable_unused() gets called.
+	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
+	 */
+	sata_clk = clk_get_sys("sata_mv.0", "0");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+	sata_clk = clk_get_sys("sata_mv.0", "1");
+	if (!IS_ERR(sata_clk))
+		sata_clk->flags |= CLK_IGNORE_UNUSED;
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&km_kirkwood_ge00_data);
+}

arch/arm/mach-kirkwood/common.c

@@ -42,7 +42,7 @@
  ****************************************************************************/
 static struct map_desc kirkwood_io_desc[] __initdata = {
 	{
-		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
 		.length		= KIRKWOOD_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -205,8 +205,7 @@ static struct clk *tclk;
 
 static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 {
-	return clk_register_gate(NULL, name, "tclk", 0,
-				 (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				 bit_idx, 0, &gating_lock);
 }
 
@@ -215,8 +214,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
 						    void (*fn_en)(void),
 						    void (*fn_dis)(void))
 {
-	return clk_register_gate_fn(NULL, name, "tclk", 0,
-				    (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				    bit_idx, 0, &gating_lock, fn_en, fn_dis);
 }
 

arch/arm/mach-kirkwood/common.h

@@ -82,6 +82,12 @@ void ib62x0_init(void);
 static inline void ib62x0_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DOCKSTAR_DT
+void dockstar_dt_init(void);
+#else
+static inline void dockstar_dt_init(void) {};
+#endif
+
 #ifdef CONFIG_MACH_GOFLEXNET_DT
 void goflexnet_init(void);
 #else
@@ -94,6 +100,18 @@ void lsxl_init(void);
 static inline void lsxl_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
+void iomega_ix2_200_init(void);
+#else
+static inline void iomega_ix2_200_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
+void km_kirkwood_init(void);
+#else
+static inline void km_kirkwood_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);

arch/arm/mach-kirkwood/include/mach/bridge-regs.h

@@ -13,37 +13,37 @@
 
 #include <mach/kirkwood.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0100)
 #define CPU_CONFIG_ERROR_PROP	0x00000004
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define CPU_RESET		0x00000002
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
 #define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
-#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE + 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
-#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE + 0x11c)
 #define CGC_BIT_GE0		(0)
 #define CGC_BIT_PEX0		(2)
 #define CGC_BIT_USB0		(3)

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -45,7 +45,7 @@
 #define KIRKWOOD_PCIE_IO_SIZE		SZ_64K
 
 #define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE		IOMEM(0xfed00000)
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
@@ -59,61 +59,61 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
-
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0100)
-#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0140)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
-
-#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
-
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
-
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
-
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
-
-#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
-
-#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE + 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0100)
+#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0140)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
 
 /*
  * Supported devices and revisions.

arch/arm/mach-kirkwood/irq.c

@@ -10,6 +10,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
@@ -30,14 +31,14 @@ static int __initdata gpio1_irqs[4] = {
 
 void __init kirkwood_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-49.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
-	orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
 }

arch/arm/mach-kirkwood/pcie.c

@@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void)
 void kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
 	kirkwood_enable_pcie();
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE_VIRT_BASE);
 }
 
 struct pcie_port {
@@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = {
 
 static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE_VIRT_BASE;
+	pp->base = PCIE_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE;
 
 	/*
@@ -147,7 +147,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
 
 static void __init pcie1_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+	pp->base = PCIE1_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE1;
 
 	/*
@@ -255,11 +255,11 @@ static struct hw_pci kirkwood_pci __initdata = {
 	.map_irq	= kirkwood_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		printk(KERN_INFO "link up\n");
 		pcie_port_map[num_pcie_ports++] = index;
 	} else

arch/arm/mach-kirkwood/ts41x-setup.c

@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void)
 		 * (Marvell 88sx7042/sata_mv) is known to stop working
 		 * after a few minutes.
 		 */
-		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+		orion_pcie_reset(PCIE_VIRT_BASE);
 
 		kirkwood_pcie_id(&dev, &rev);
 		if (dev == MV88F6282_DEV_ID)

arch/arm/mach-mv78xx0/addr-map.c

@@ -48,7 +48,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i
 	 * so we don't need to take that into account here.
 	 */
 
-	return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+	return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
 }
 
 /*
@@ -72,10 +72,10 @@ void __init mv78xx0_setup_cpu_mbus(void)
 	 */
 	if (mv78xx0_core_index() == 0)
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU0_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU0_BASE);
 	else
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU1_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU1_BASE);
 }
 
 void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,

arch/arm/mach-mv78xx0/common.c

@@ -130,12 +130,12 @@ static int get_tclk(void)
  ****************************************************************************/
 static struct map_desc mv78xx0_io_desc[] __initdata = {
 	{
-		.virtual	= MV78XX0_CORE_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE,
 		.pfn		= 0,
 		.length		= MV78XX0_CORE_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= MV78XX0_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
 		.length		= MV78XX0_REGS_SIZE,
 		.type		= MT_DEVICE,

arch/arm/mach-mv78xx0/include/mach/bridge-regs.h

@@ -11,18 +11,18 @@
 
 #include <mach/mv78xx0.h>
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define L2_WRITETHROUGH		0x00020000
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_ERR_OFF	0x0000
 #define IRQ_CAUSE_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0008
@@ -30,7 +30,7 @@
 #define IRQ_MASK_LOW_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
 #endif

arch/arm/mach-mv78xx0/include/mach/mv78xx0.h

@@ -41,7 +41,7 @@
  */
 #define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
 #define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_VIRT_BASE	IOMEM(0xfe400000)
 #define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
 #define MV78XX0_CORE_REGS_SIZE		SZ_16K
 
@@ -49,7 +49,7 @@
 #define MV78XX0_PCIE_IO_SIZE		SZ_1M
 
 #define MV78XX0_REGS_PHYS_BASE		0xf1000000
-#define MV78XX0_REGS_VIRT_BASE		0xfd000000
+#define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfd000000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
@@ -64,47 +64,47 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1570)
-
-#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE | 0x0100)
-#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
-#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE + 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE + 0x1570)
+
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE + 0x0100)
+#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1000)
+#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1100)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2300)
+
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x34000)
+
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x4c000)
+
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
+
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
+
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
+
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
  * Supported devices and revisions.

arch/arm/mach-mv78xx0/irq.c

@@ -10,6 +10,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
@@ -24,16 +25,16 @@ static int __initdata gpio0_irqs[4] = {
 
 void __init mv78xx0_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
 	 * registers for core #1 are at an offset of 0x18 from those of
 	 * core #0.)
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE,
+	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
 			mv78xx0_core_index() ? 0x18 : 0,
 			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
 }

arch/arm/mach-mv78xx0/pcie.c

@@ -34,8 +34,8 @@ static struct resource pcie_io_space;
 
 void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 {
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE00_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE00_VIRT_BASE);
 }
 
 u32 pcie_port_size[8] = {
@@ -223,11 +223,11 @@ static struct hw_pci mv78xx0_pci __initdata = {
 	.map_irq	= mv78xx0_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int maj, int min, unsigned long base)
+static void __init add_pcie_port(int maj, int min, void __iomem *base)
 {
 	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
 
 		printk("link up\n");
@@ -235,7 +235,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base)
 		pp->maj = maj;
 		pp->min = min;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
 		memset(&pp->res, 0, sizeof(pp->res));
 	} else {
@@ -249,7 +249,7 @@ void __init mv78xx0_pcie_init(int init_port0, int init_port1)
 
 	if (init_port0) {
 		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
-		if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+		if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) {
 			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
 			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
 			add_pcie_port(0, 3, PCIE03_VIRT_BASE);

arch/arm/mach-mvebu/Kconfig

@@ -6,6 +6,8 @@ config ARCH_MVEBU
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
+	select PINCTRL
+	select PLAT_ORION
 	select SPARSE_IRQ
 
 if ARCH_MVEBU
@@ -13,13 +15,25 @@ if ARCH_MVEBU
 menu "Marvell SOC with device tree"
 
 config MACH_ARMADA_370_XP
-	bool "Marvell Armada 370 and Aramada XP boards"
+	bool
 	select ARMADA_370_XP_TIMER
 	select CPU_V7
+
+config MACH_ARMADA_370
+	bool "Marvell Armada 370 boards"
+	select MACH_ARMADA_370_XP
+	select PINCTRL_ARMADA_370
 	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 370 SoC with device tree.
 
-	  Say 'Y' here if you want your kernel to support boards based on
-	  Marvell Armada 370 or Armada XP with device tree.
+config MACH_ARMADA_XP
+	bool "Marvell Armada XP boards"
+	select MACH_ARMADA_370_XP
+	select PINCTRL_ARMADA_XP
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada XP SoC with device tree.
 
 endmenu
 

arch/arm/mach-mvebu/Makefile

-ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+	-I$(srctree)/arch/arm/plat-orion/include
 
 obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o

arch/arm/mach-mvebu/addr-map.c

+/*
+ * Address map functions for Marvell 370 / XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <plat/addr-map.h>
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define ARMADA_XP_TARGET_DEV_BUS	1
+#define   ARMADA_XP_ATTR_DEV_BOOTROM    0x1D
+#define ARMADA_XP_TARGET_ETH1		3
+#define ARMADA_XP_TARGET_PCIE_0_2	4
+#define ARMADA_XP_TARGET_ETH0		7
+#define ARMADA_XP_TARGET_PCIE_1_3	8
+
+#define ARMADA_370_TARGET_DEV_BUS       1
+#define   ARMADA_370_ATTR_DEV_BOOTROM   0x1D
+#define ARMADA_370_TARGET_PCIE_0        4
+#define ARMADA_370_TARGET_PCIE_1        8
+
+#define ARMADA_WINDOW_8_PLUS_OFFSET       0x90
+#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
+
+static const struct __initdata orion_addr_map_info
+armada_xp_addr_map_info[] = {
+	/*
+	 * Window for the BootROM, needed for SMP on Armada XP
+	 */
+	{ 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
+	  ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static const struct __initdata orion_addr_map_info
+armada_370_addr_map_info[] = {
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static struct of_device_id of_addr_decoding_controller_table[] = {
+	{ .compatible = "marvell,armada-addr-decoding-controller" },
+	{ /* end of list */ },
+};
+
+static void __iomem *
+armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+	unsigned int offset;
+
+	/* The register layout is a bit annoying and the below code
+	 * tries to cope with it.
+	 * - At offset 0x0, there are the registers for the first 8
+	 *   windows, with 4 registers of 32 bits per window (ctrl,
+	 *   base, remap low, remap high)
+	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
+	 *   the internal registers base address and internal units
+	 *   sync barrier register.
+	 * - Then at offset 0x90, there the registers for 12
+	 *   windows, with only 2 registers of 32 bits per window
+	 *   (ctrl, base).
+	 */
+	if (win < 8)
+		offset = (win << 4);
+	else
+		offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+
+	return cfg->bridge_virt_base + offset;
+}
+
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+	.num_wins = 20,
+	.remappable_wins = 8,
+	.win_cfg_base = armada_cfg_base,
+};
+
+static int __init armada_setup_cpu_mbus(void)
+{
+	struct device_node *np;
+	void __iomem *mbus_unit_addr_decoding_base;
+	void __iomem *sdram_addr_decoding_base;
+
+	np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
+	if (!np)
+		return -ENODEV;
+
+	mbus_unit_addr_decoding_base = of_iomap(np, 0);
+	BUG_ON(!mbus_unit_addr_decoding_base);
+
+	sdram_addr_decoding_base =
+		mbus_unit_addr_decoding_base +
+		ARMADA_SDRAM_ADDR_DECODING_OFFSET;
+
+	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
+
+	/*
+	 * Disable, clear and configure windows.
+	 */
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
+	else if (of_machine_is_compatible("marvell,armada370"))
+		orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
+	else {
+		pr_err("Unsupported SoC\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    sdram_addr_decoding_base);
+	return 0;
+}
+
+/* Using a early_initcall is needed so that this initialization gets
+ * done before the SMP initialization, which requires the BootROM to
+ * be remapped. */
+early_initcall(armada_setup_cpu_mbus);

arch/arm/mach-mvebu/armada-370-xp.c

@@ -25,7 +25,7 @@
 
 static struct map_desc armada_370_xp_io_desc[] __initdata = {
 	{
-		.virtual	= ARMADA_370_XP_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
 		.length		= ARMADA_370_XP_REGS_SIZE,
 		.type		= MT_DEVICE,

arch/arm/mach-mvebu/armada-370-xp.h

@@ -16,7 +16,7 @@
 #define __MACH_ARMADA_370_XP_H
 
 #define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
+#define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfeb00000)
 #define ARMADA_370_XP_REGS_SIZE		SZ_1M
 
 #endif /* __MACH_ARMADA_370_XP_H */

arch/arm/mach-mvebu/include/mach/gpio.h

+/* empty */

arch/arm/mach-omap1/devices.c

@@ -357,6 +357,33 @@ static inline void omap_init_uwire(void) {}
 #endif
 
 
+#define OMAP1_RNG_BASE		0xfffe5000
+
+static struct resource omap1_rng_resources[] = {
+	{
+		.start		= OMAP1_RNG_BASE,
+		.end		= OMAP1_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap1_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap1_rng_resources),
+	.resource	= omap1_rng_resources,
+};
+
+static void omap1_init_rng(void)
+{
+	if (!cpu_is_omap16xx())
+		return;
+
+	(void) platform_device_register(&omap1_rng_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -395,6 +422,7 @@ static int __init omap1_init_devices(void)
 	omap_init_spi100k();
 	omap_init_sti();
 	omap_init_uwire();
+	omap1_init_rng();
 
 	return 0;
 }

arch/arm/mach-omap1/timer.c

@@ -141,7 +141,7 @@ static int __init omap1_dm_timer_init(void)
 
 		pdata->set_timer_src = omap1_dm_timer_set_src;
 		pdata->timer_capability = OMAP_TIMER_ALWON |
-				OMAP_TIMER_NEEDS_RESET;
+				OMAP_TIMER_NEEDS_RESET | OMAP_TIMER_HAS_DSP_IRQ;
 
 		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
 		if (ret) {

arch/arm/mach-omap2/Makefile

@@ -179,6 +179,7 @@ obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
+obj-$(CONFIG_HW_PERF_EVENTS)		+= pmu.o
 
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o

arch/arm/mach-omap2/board-apollon.c

@@ -202,7 +202,7 @@ static inline void __init apollon_init_smc91x(void)
 		return;
 	}
 
-	clk_enable(gpmc_fck);
+	clk_prepare_enable(gpmc_fck);
 	rate = clk_get_rate(gpmc_fck);
 
 	eth_cs = APOLLON_ETH_CS;
@@ -246,7 +246,7 @@ static inline void __init apollon_init_smc91x(void)
 		gpmc_cs_free(APOLLON_ETH_CS);
 	}
 out:
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 }
 

arch/arm/mach-omap2/board-h4.c

@@ -265,9 +265,9 @@ static inline void __init h4_init_debug(void)
 		return;
 	}
 
-	clk_enable(gpmc_fck);
+	clk_prepare_enable(gpmc_fck);
 	rate = clk_get_rate(gpmc_fck);
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 
 	if (is_gpmc_muxed())
@@ -311,7 +311,7 @@ static inline void __init h4_init_debug(void)
 		gpmc_cs_free(eth_cs);
 
 out:
-	clk_disable(gpmc_fck);
+	clk_disable_unprepare(gpmc_fck);
 	clk_put(gpmc_fck);
 }
 

arch/arm/mach-omap2/board-omap4panda.c

@@ -171,7 +171,7 @@ static void __init omap4_ehci_init(void)
 		return;
 	}
 	clk_set_rate(phy_ref_clk, 19200000);
-	clk_enable(phy_ref_clk);
+	clk_prepare_enable(phy_ref_clk);
 
 	/* disable the power to the usb hub prior to init and reset phy+hub */
 	ret = gpio_request_array(panda_ehci_gpios,

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -59,7 +59,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
 	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 
 	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
-			     OMAP24XX_CM_IDLEST_VAL, clk->name);
+			     OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
 
 	/*
 	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()

arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c

@@ -68,14 +68,15 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
 long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
 {
 	const struct prcm_config *ptr;
-	long highest_rate;
+	long highest_rate, sys_clk_rate;
 
 	highest_rate = -EINVAL;
+	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 		if (!(ptr->flags & cpu_mask))
 			continue;
-		if (ptr->xtal_speed != sclk->rate)
+		if (ptr->xtal_speed != sys_clk_rate)
 			continue;
 
 		highest_rate = ptr->mpu_speed;
@@ -94,12 +95,15 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
+	long sys_clk_rate;
+
+	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
 
-		if (prcm->xtal_speed != sclk->rate)
+		if (prcm->xtal_speed != sys_clk_rate)
 			continue;
 
 		if (prcm->mpu_speed <= rate) {

arch/arm/mach-omap2/clkt34xx_dpll3m2.c

@@ -56,6 +56,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	struct omap_sdrc_params *sdrc_cs0;
 	struct omap_sdrc_params *sdrc_cs1;
 	int ret;
+	unsigned long clkrate;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -64,11 +65,12 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (validrate != rate)
 		return -EINVAL;
 
-	sdrcrate = sdrc_ick_p->rate;
-	if (rate > clk->rate)
-		sdrcrate <<= ((rate / clk->rate) >> 1);
+	sdrcrate = __clk_get_rate(sdrc_ick_p);
+	clkrate = __clk_get_rate(clk);
+	if (rate > clkrate)
+		sdrcrate <<= ((rate / clkrate) >> 1);
 	else
-		sdrcrate >>= ((clk->rate / rate) >> 1);
+		sdrcrate >>= ((clkrate / rate) >> 1);
 
 	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
 	if (ret)
@@ -82,7 +84,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	/*
 	 * XXX This only needs to be done when the CPU frequency changes
 	 */
-	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+	_mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
 	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
 	c += 1;  /* for safety */
 	c *= SDRC_MPURATE_LOOPS;
@@ -90,8 +92,8 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (c == 0)
 		c = 1;
 
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		 validrate);
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
+		 clkrate, validrate);
 	pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
 		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
@@ -102,14 +104,14 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 
 	if (sdrc_cs1)
 		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
+				  new_div, unlock_dll, c, rate > clkrate,
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
 				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
 	else
 		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
+				  new_div, unlock_dll, c, rate > clkrate,
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  0, 0, 0, 0);

arch/arm/mach-omap2/clkt_clksel.c

@@ -72,7 +72,7 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
 	if (!clks->parent) {
 		/* This indicates a data problem */
 		WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
-		     clk->name, src_clk->name);
+		     __clk_get_name(clk), __clk_get_name(src_clk));
 		return NULL;
 	}
 
@@ -127,7 +127,8 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
 	if (max_div == 0) {
 		/* This indicates an error in the clksel data */
 		WARN(1, "clock: %s: could not find divisor for parent %s\n",
-		     clk->name, src_clk->parent->name);
+		     __clk_get_name(clk),
+		     __clk_get_name(__clk_get_parent(src_clk)));
 		return 0;
 	}
 
@@ -176,8 +177,10 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
+	struct clk *parent;
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	parent = __clk_get_parent(clk);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return 0;
 
@@ -191,8 +194,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
 
 	if (!clkr->div) {
 		/* This indicates a data error */
-		WARN(1, "clock: %s: could not find fieldval %d parent %s\n",
-		     clk->name, field_val, clk->parent->name);
+		WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
+		     __clk_get_name(clk), field_val, __clk_get_name(parent));
 		return 0;
 	}
 
@@ -213,11 +216,13 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
+	struct clk *parent;
 
 	/* should never happen */
 	WARN_ON(div == 0);
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	parent = __clk_get_parent(clk);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return ~0;
 
@@ -230,8 +235,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
 	}
 
 	if (!clkr->div) {
-		pr_err("clock: %s: could not find divisor %d parent %s\n",
-		       clk->name, div, clk->parent->name);
+		pr_err("clock: %s: could not find divisor %d for parent %s\n",
+		       __clk_get_name(clk), div, __clk_get_name(parent));
 		return ~0;
 	}
 
@@ -281,16 +286,23 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
+	struct clk *parent;
+	unsigned long parent_rate;
+	const char *clk_name;
+
+	parent = __clk_get_parent(clk);
+	parent_rate = __clk_get_rate(parent);
+	clk_name = __clk_get_name(clk);
 
 	if (!clk->clksel || !clk->clksel_mask)
 		return ~0;
 
 	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk->name, target_rate);
+		 clk_name, target_rate);
 
 	*new_div = 1;
 
-	clks = _get_clksel_by_parent(clk, clk->parent);
+	clks = _get_clksel_by_parent(clk, parent);
 	if (!clks)
 		return ~0;
 
@@ -300,29 +312,29 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			pr_err("clock: %s: clksel_rate table not sorted",
-			       clk->name);
+			pr_err("clock: %s: clksel_rate table not sorted\n",
+			       clk_name);
 
 		last_div = clkr->div;
 
-		test_rate = clk->parent->rate / clkr->div;
+		test_rate = parent_rate / clkr->div;
 
 		if (test_rate <= target_rate)
 			break; /* found it */
 	}
 
 	if (!clkr->div) {
-		pr_err("clock: %s: could not find divisor for target rate %ld parent %s\n",
-		       clk->name, target_rate, clk->parent->name);
+		pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
+		       clk_name, target_rate, __clk_get_name(parent));
 		return ~0;
 	}
 
 	*new_div = clkr->div;
 
 	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (clk->parent->rate / clkr->div));
+		 (parent_rate / clkr->div));
 
-	return clk->parent->rate / clkr->div;
+	return parent_rate / clkr->div;
 }
 
 /*
@@ -344,10 +356,15 @@ void omap2_init_clksel_parent(struct clk *clk)
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 	u32 r, found = 0;
+	struct clk *parent;
+	const char *clk_name;
 
 	if (!clk->clksel || !clk->clksel_mask)
 		return;
 
+	parent = __clk_get_parent(clk);
+	clk_name = __clk_get_name(clk);
+
 	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
 	r >>= __ffs(clk->clksel_mask);
 
@@ -357,11 +374,13 @@ void omap2_init_clksel_parent(struct clk *clk)
 				continue;
 
 			if (clkr->val == r) {
-				if (clk->parent != clks->parent) {
+				if (parent != clks->parent) {
 					pr_debug("clock: %s: inited parent to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
+						 clk_name,
+						 __clk_get_name(clks->parent),
+						 ((parent) ?
+						  __clk_get_name(parent) :
+						 "NULL"));
 					clk_reparent(clk, clks->parent);
 				};
 				found = 1;
@@ -371,7 +390,7 @@ void omap2_init_clksel_parent(struct clk *clk)
 
 	/* This indicates a data error */
 	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
-	     clk->name, r);
+	     clk_name, r);
 
 	return;
 }
@@ -389,15 +408,17 @@ unsigned long omap2_clksel_recalc(struct clk *clk)
 {
 	unsigned long rate;
 	u32 div = 0;
+	struct clk *parent;
 
 	div = _read_divisor(clk);
 	if (div == 0)
-		return clk->rate;
+		return __clk_get_rate(clk);
 
-	rate = clk->parent->rate / div;
+	parent = __clk_get_parent(clk);
+	rate = __clk_get_rate(parent) / div;
 
-	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
-		 rate, div);
+	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n",
+		 __clk_get_name(clk), rate, div);
 
 	return rate;
 }
@@ -452,9 +473,10 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 
 	_write_clksel_reg(clk, field_val);
 
-	clk->rate = clk->parent->rate / new_div;
+	clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div;
 
-	pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
+	pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk),
+		 __clk_get_rate(clk));
 
 	return 0;
 }
@@ -496,13 +518,15 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
 	clk_reparent(clk, new_parent);
 
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
-	clk->rate = new_parent->rate;
+	clk->rate = __clk_get_rate(new_parent);
 
 	if (parent_div > 0)
-		clk->rate /= parent_div;
+		__clk_get_rate(clk) /= parent_div;
 
 	pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
-		 clk->name, clk->parent->name, clk->rate);
+		 __clk_get_name(clk),
+		 __clk_get_name(__clk_get_parent(clk)),
+		 __clk_get_rate(clk));
 
 	return 0;
 }

arch/arm/mach-omap2/clkt_dpll.c

@@ -87,7 +87,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
 	dd = clk->dpll_data;
 
 	/* DPLL divider must result in a valid jitter correction val */
-	fint = clk->parent->rate / n;
+	fint = __clk_get_rate(__clk_get_parent(clk)) / n;
 
 	if (cpu_is_omap24xx()) {
 		/* Should not be called for OMAP2, so warn if it is called */
@@ -252,16 +252,16 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 	if (cpu_is_omap24xx()) {
 		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
+			return __clk_get_rate(dd->clk_bypass);
 	} else if (cpu_is_omap34xx()) {
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
+			return __clk_get_rate(dd->clk_bypass);
 	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			return dd->clk_bypass->rate;
+			return __clk_get_rate(dd->clk_bypass);
 	}
 
 	v = __raw_readl(dd->mult_div1_reg);
@@ -270,7 +270,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+	dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -296,16 +296,20 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	unsigned long scaled_rt_rp;
 	unsigned long new_rate = 0;
 	struct dpll_data *dd;
+	unsigned long ref_rate;
+	const char *clk_name;
 
 	if (!clk || !clk->dpll_data)
 		return ~0;
 
 	dd = clk->dpll_data;
 
+	ref_rate = __clk_get_rate(dd->clk_ref);
+	clk_name = __clk_get_name(clk);
 	pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
-		 clk->name, target_rate);
+		 clk_name, target_rate);
 
-	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+	scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
 	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
 
 	dd->last_rounded_rate = 0;
@@ -332,14 +336,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 			break;
 
 		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    dd->clk_ref->rate);
+				    ref_rate);
 
 		/* m can't be set low enough for this n - try with a larger n */
 		if (r == DPLL_MULT_UNDERFLOW)
 			continue;
 
 		pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
-			 clk->name, m, n, new_rate);
+			 clk_name, m, n, new_rate);
 
 		if (target_rate == new_rate) {
 			dd->last_rounded_m = m;
@@ -350,8 +354,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	}
 
 	if (target_rate != new_rate) {
-		pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
-			 target_rate);
+		pr_debug("clock: %s: cannot round to rate %ld\n",
+			 clk_name, target_rate);
 		return ~0;
 	}
 

arch/arm/mach-omap2/clock.c

@@ -78,7 +78,7 @@ static void _omap2_module_wait_ready(struct clk *clk)
 	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
 
 	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
-			     clk->name);
+			     __clk_get_name(clk));
 }
 
 /* Public functions */
@@ -94,18 +94,21 @@ static void _omap2_module_wait_ready(struct clk *clk)
 void omap2_init_clk_clkdm(struct clk *clk)
 {
 	struct clockdomain *clkdm;
+	const char *clk_name;
 
 	if (!clk->clkdm_name)
 		return;
 
+	clk_name = __clk_get_name(clk);
+
 	clkdm = clkdm_lookup(clk->clkdm_name);
 	if (clkdm) {
 		pr_debug("clock: associated clk %s to clkdm %s\n",
-			 clk->name, clk->clkdm_name);
+			 clk_name, clk->clkdm_name);
 		clk->clkdm = clkdm;
 	} else {
 		pr_debug("clock: could not associate clk %s to clkdm %s\n",
-			 clk->name, clk->clkdm_name);
+			 clk_name, clk->clkdm_name);
 	}
 }
 

arch/arm/mach-omap2/clock2420_data.c

@@ -1804,6 +1804,7 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_242X),
+	CLK(NULL,	"dss_ick",		&dss_ick,	CK_242X),
 	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_242X),
 	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_242X),
 	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_242X),
@@ -1843,12 +1844,16 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_242X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_242X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_242X),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_242X),
 	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_242X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_242X),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp2_ick,	CK_242X),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_242X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_242X),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_242X),
 	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_242X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_242X),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_242X),
 	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_242X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_242X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_242X),
@@ -1859,12 +1864,15 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_242X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_242X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_242X),
+	CLK(NULL,	"mpu_wdt_ick",		&mpu_wdt_ick,	CK_242X),
 	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_242X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_242X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_242X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_242X),
 	CLK("omap24xxcam", "fck",	&cam_fck,	CK_242X),
+	CLK(NULL,	"cam_fck",	&cam_fck,	CK_242X),
 	CLK("omap24xxcam", "ick",	&cam_ick,	CK_242X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_242X),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_242X),
 	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_242X),
 	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_242X),
@@ -1873,16 +1881,22 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_242X),
 	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_242X),
 	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK(NULL,	"mmc_ick",	&mmc_ick,	CK_242X),
 	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"mmc_fck",	&mmc_fck,	CK_242X),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_242X),
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_242X),
 	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
 	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_242X),
 	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_242X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_242X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_242X),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_242X),
 	CLK(NULL,	"i2c1_fck",	&i2c1_fck,	CK_242X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_242X),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_242X),
 	CLK(NULL,	"i2c2_fck",	&i2c2_fck,	CK_242X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
@@ -1892,14 +1906,18 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
 	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_242X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
+	CLK(NULL,	"rng_ick",		&rng_ick,	CK_242X),
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
-	CLK(NULL,	"timer_32k_ck",	&func_32k_ck,	CK_243X),
-	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
-	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"timer_32k_ck",	&func_32k_ck,	CK_242X),
+	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_242X),
+	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_242X),
+	CLK(NULL,	"cpufreq_ck",	&virt_prcm_set,	CK_242X),
 };
 
 /*

arch/arm/mach-omap2/clock2430_data.c

@@ -1888,6 +1888,7 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_243X),
+	CLK(NULL,	"dss_ick",		&dss_ick,	CK_243X),
 	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_243X),
 	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X),
 	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X),
@@ -1927,20 +1928,28 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_243X),
 	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_243X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp2_ick,	CK_243X),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_243X),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK(NULL,	"mcbsp3_ick",	&mcbsp3_ick,	CK_243X),
 	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_243X),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK(NULL,	"mcbsp4_ick",	&mcbsp4_ick,	CK_243X),
 	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_243X),
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK(NULL,	"mcbsp5_ick",	&mcbsp5_ick,	CK_243X),
 	CLK(NULL,	"mcbsp5_fck",	&mcbsp5_fck,	CK_243X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_243X),
 	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_243X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_243X),
 	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_243X),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK(NULL,	"mcspi3_ick",	&mcspi3_ick,	CK_243X),
 	CLK(NULL,	"mcspi3_fck",	&mcspi3_fck,	CK_243X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X),
@@ -1951,13 +1960,16 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X),
+	CLK(NULL,	"mpu_wdt_ick",	&mpu_wdt_ick,	CK_243X),
 	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_243X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
 	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X),
+	CLK(NULL,	"cam_fck",	&cam_fck,	CK_243X),
 	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_243X),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X),
 	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X),
 	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X),
@@ -1966,10 +1978,14 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X),
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_243X),
 	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_243X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_243X),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_243X),
 	CLK(NULL,	"i2chs1_fck",	&i2chs1_fck,	CK_243X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_243X),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_243X),
 	CLK(NULL,	"i2chs2_fck",	&i2chs2_fck,	CK_243X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X),
@@ -1978,22 +1994,29 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"des_ick",	&des_ick,	CK_243X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_243X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X),
+	CLK(NULL,	"rng_ick",	&rng_ick,	CK_243X),
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_243X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
 	CLK("musb-omap2430",	"ick",	&usbhs_ick,	CK_243X),
+	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK(NULL,	"mmchs1_ick",	&mmchs1_ick,	CK_243X),
 	CLK(NULL,	"mmchs1_fck",	&mmchs1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK(NULL,	"mmchs2_ick",	&mmchs2_ick,	CK_243X),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_243X),
 	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
 	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK(NULL,	"mmchsdb1_fck",		&mmchsdb1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
+	CLK(NULL,	"mmchsdb2_fck",		&mmchsdb2_fck,	CK_243X),
 	CLK(NULL,	"timer_32k_ck",  &func_32k_ck,   CK_243X),
 	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"timer_ext_ck",	&alt_ck,	CK_243X),
+	CLK(NULL,	"cpufreq_ck",	&virt_prcm_set,	CK_243X),
 };
 
 /*

arch/arm/mach-omap2/clock33xx_data.c

@@ -1013,6 +1013,7 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"dpll_core_m5_ck",	&dpll_core_m5_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_core_m6_ck",	&dpll_core_m6_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_mpu_ck",		&dpll_mpu_ck,	CK_AM33XX),
+	CLK("cpu0",	NULL,			&dpll_mpu_ck,		CK_AM33XX),
 	CLK(NULL,	"dpll_mpu_m2_ck",	&dpll_mpu_m2_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_ddr_ck",		&dpll_ddr_ck,	CK_AM33XX),
 	CLK(NULL,	"dpll_ddr_m2_ck",	&dpll_ddr_m2_ck,	CK_AM33XX),

arch/arm/mach-omap2/clock3xxx.c

@@ -63,15 +63,15 @@ void __init omap3_clk_lock_dpll5(void)
 
 	dpll5_clk = clk_get(NULL, "dpll5_ck");
 	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_enable(dpll5_clk);
+	clk_prepare_enable(dpll5_clk);
 
 	/* Program dpll5_m2_clk divider for no division */
 	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_enable(dpll5_m2_clk);
+	clk_prepare_enable(dpll5_m2_clk);
 	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
 
-	clk_disable(dpll5_m2_clk);
-	clk_disable(dpll5_clk);
+	clk_disable_unprepare(dpll5_m2_clk);
+	clk_disable_unprepare(dpll5_clk);
 	return;
 }
 

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3215,7 +3215,6 @@ static struct clk dummy_apb_pclk = {
  * clkdev
  */
 
-/* XXX At some point we should rename this file to clock3xxx_data.c */
 static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"apb_pclk",	&dummy_apb_pclk,	CK_3XXX),
 	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
@@ -3243,11 +3242,13 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
 	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_3XXX),
 	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
+	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_3XXX),
 	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_3XXX),
 	CLK(NULL,	"omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
 	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
+	CLK(NULL,	"omap_96m_alwon_fck_3630", &omap_96m_alwon_fck_3630, CK_36XX),
 	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_3XXX),
 	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_3XXX),
 	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_3XXX),
@@ -3263,6 +3264,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
 	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_3XXX),
 	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
+	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
@@ -3272,6 +3274,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_3XXX),
 	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_3XXX),
 	CLK(NULL,	"arm_fck",	&arm_fck,	CK_3XXX),
+	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
 	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
 	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_34XX | CK_36XX),
@@ -3295,6 +3298,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_tll",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"mmchs3_fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_3XXX),
@@ -3315,6 +3319,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_3XXX),
 	CLK("omap_hdq.0",	"fck",	&hdq_fck,	CK_3XXX),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_3XXX),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
@@ -3322,6 +3327,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_3XXX),
 	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
 	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_3XXX),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_3XXX),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
@@ -3329,28 +3336,42 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_tll",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap_hsmmc.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"mmchs3_ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
 	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
 	CLK("omap-sham",	"ick",	&sha12_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"des2_ick",	&des2_ick,	CK_34XX | CK_36XX),
 	CLK("omap_hsmmc.1",	"ick",	&mmchs2_ick,	CK_3XXX),
 	CLK("omap_hsmmc.0",	"ick",	&mmchs1_ick,	CK_3XXX),
+	CLK(NULL,	"mmchs2_ick",	&mmchs2_ick,	CK_3XXX),
+	CLK(NULL,	"mmchs1_ick",	&mmchs1_ick,	CK_3XXX),
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_34XX | CK_36XX),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_3XXX),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_3XXX),
 	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_3XXX),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_3XXX),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_3XXX),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi4_ick",	&mcspi4_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi3_ick",	&mcspi3_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi2_ick",	&mcspi2_ick,	CK_3XXX),
+	CLK(NULL,	"mcspi1_ick",	&mcspi1_ick,	CK_3XXX),
 	CLK("omap_i2c.3", "ick",	&i2c3_ick,	CK_3XXX),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_3XXX),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_3XXX),
+	CLK(NULL,	"i2c3_ick",	&i2c3_ick,	CK_3XXX),
+	CLK(NULL,	"i2c2_ick",	&i2c2_ick,	CK_3XXX),
+	CLK(NULL,	"i2c1_ick",	&i2c1_ick,	CK_3XXX),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_3XXX),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_3XXX),
 	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_3XXX),
 	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_3XXX),
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_3XXX),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp5_ick",	&mcbsp5_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp1_ick",	&mcbsp1_ick,	CK_3XXX),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_3XXX),
@@ -3369,7 +3390,9 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_3XXX),
 	CLK(NULL,	"dss2_alwon_fck",	&dss2_alwon_fck, CK_3XXX),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"dss_ick",		&dss_ick_3430es1,	CK_3430ES1),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"dss_ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
@@ -3385,6 +3408,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
 	CLK("usbhs_omap",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
 	CLK("usbhs_omap",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_tll",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_tll",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
@@ -3394,6 +3419,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2PLUS | CK_36XX),
 	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_3XXX),
+	CLK(NULL,	"wdt2_ick",	&wdt2_ick,	CK_3XXX),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_3XXX),
 	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_3XXX),
 	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
@@ -3439,9 +3465,13 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_3XXX),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_3XXX),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp4_ick",	&mcbsp2_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp3_ick",	&mcbsp3_ick,	CK_3XXX),
+	CLK(NULL,	"mcbsp2_ick",	&mcbsp4_ick,	CK_3XXX),
 	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_3XXX),
 	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_3XXX),
 	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_3XXX),
+	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
 	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
 	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_3XXX),
 	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_3XXX),
@@ -3457,8 +3487,12 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
 	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
 	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
+	CLK(NULL,	"emac_ick",	&emac_ick,	CK_AM35XX),
+	CLK(NULL,	"emac_fck",	&emac_fck,	CK_AM35XX),
 	CLK("davinci_emac.0",	NULL,	&emac_ick,	CK_AM35XX),
 	CLK("davinci_mdio.0",	NULL,	&emac_fck,	CK_AM35XX),
+	CLK(NULL,	"vpfe_ick",	&emac_ick,	CK_AM35XX),
+	CLK(NULL,	"vpfe_fck",	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
 	CLK(NULL,	"hsotgusb_ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
@@ -3467,6 +3501,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
 	CLK(NULL,	"timer_32k_ck",	&omap_32k_fck,  CK_3XXX),
 	CLK(NULL,	"timer_sys_ck",	&sys_ck,	CK_3XXX),
+	CLK(NULL,	"cpufreq_ck",	&dpll1_ck,	CK_3XXX),
 };
 
 

arch/arm/mach-omap2/clock44xx_data.c

@@ -3156,6 +3156,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk,	CK_443X),
 	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk,	CK_443X),
 	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk,	CK_443X),
+	CLK(NULL,	"dss_fck",			&dss_fck,	CK_443X),
 	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
@@ -3212,6 +3213,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
 	CLK(NULL,	"ocp2scp_usb_phy_ick",		&ocp2scp_usb_phy_ick,	CK_443X),
 	CLK(NULL,	"ocp_wp_noc_ick",		&ocp_wp_noc_ick,	CK_443X),
+	CLK(NULL,	"rng_ick",			&rng_ick,	CK_443X),
 	CLK("omap_rng",	"ick",				&rng_ick,	CK_443X),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
 	CLK(NULL,	"sl2if_ick",			&sl2if_ick,	CK_443X),
@@ -3243,6 +3245,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
@@ -3253,15 +3256,19 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
+	CLK(NULL,	"usb_otg_hs_ick",		&usb_otg_hs_ick,	CK_443X),
 	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
 	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
+	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("usbhs_tll",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
@@ -3312,8 +3319,10 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
 	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck,	CK_443X),
+	CLK("usbhs_tll",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
 	CLK(NULL,	"timer_32k_ck",	&sys_32k_ck,	CK_443X),
+	/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
 	CLK("omap_timer.1",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("omap_timer.2",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
 	CLK("omap_timer.3",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
@@ -3325,6 +3334,18 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("omap_timer.6",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK("omap_timer.7",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
 	CLK("omap_timer.8",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4a318000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48032000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48034000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48036000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("4803e000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48086000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("48088000.timer",	"timer_sys_ck",	&sys_clkin_ck,	CK_443X),
+	CLK("49038000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903a000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903c000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK("4903e000.timer",	"timer_sys_ck",	&syc_clk_div_ck,	CK_443X),
+	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)

arch/arm/mach-omap2/clockdomain.c

@@ -899,6 +899,23 @@ bool clkdm_in_hwsup(struct clockdomain *clkdm)
 	return ret;
 }
 
+/**
+ * clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use?
+ * @clkdm: struct clockdomain *
+ *
+ * Returns true if clockdomain @clkdm has the
+ * CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is
+ * null.  More information is available in the documentation for the
+ * CLKDM_MISSING_IDLE_REPORTING macro.
+ */
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
+{
+	if (!clkdm)
+		return false;
+
+	return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
+}
+
 /* Clockdomain-to-clock/hwmod framework interface code */
 
 static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)

arch/arm/mach-omap2/clockdomain.h

 /*
- * arch/arm/plat-omap/include/mach/clockdomain.h
- *
  * OMAP2/3 clockdomain framework functions
  *
- * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008, 2012 Texas Instruments, Inc.
  * Copyright (C) 2008-2011 Nokia Corporation
  *
  * Paul Walmsley
@@ -34,6 +32,20 @@
  * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
  *     active whenever the MPU is active.  True for interconnects and
  *     the WKUP clockdomains.
+ * CLKDM_MISSING_IDLE_REPORTING: The idle status of the IP blocks and
+ *     clocks inside this clockdomain are not taken into account by
+ *     the PRCM when determining whether the clockdomain is idle.
+ *     Without this flag, if the clockdomain is set to
+ *     hardware-supervised idle mode, the PRCM may transition the
+ *     enclosing powerdomain to a low power state, even when devices
+ *     inside the clockdomain and powerdomain are in use.  (An example
+ *     of such a clockdomain is the EMU clockdomain on OMAP3/4.)  If
+ *     this flag is set, and the clockdomain does not support the
+ *     force-sleep mode, then the HW_AUTO mode will be used to put the
+ *     clockdomain to sleep.  Similarly, if the clockdomain supports
+ *     the force-wakeup mode, then it will be used whenever a clock or
+ *     IP block inside the clockdomain is active, rather than the
+ *     HW_AUTO mode.
  */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
 #define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
@@ -41,6 +53,7 @@
 #define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
+#define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
@@ -187,6 +200,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
 void clkdm_allow_idle(struct clockdomain *clkdm);
 void clkdm_deny_idle(struct clockdomain *clkdm);
 bool clkdm_in_hwsup(struct clockdomain *clkdm);
+bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
 
 int clkdm_wakeup(struct clockdomain *clkdm);
 int clkdm_sleep(struct clockdomain *clkdm);

arch/arm/mach-omap2/clockdomain2xxx_3xxx.c

@@ -162,6 +162,19 @@ static void _disable_hwsup(struct clockdomain *clkdm)
 						clkdm->clktrctrl_mask);
 }
 
+static int omap3_clkdm_sleep(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+	return 0;
+}
+
+static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+	return 0;
+}
 
 static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
 {
@@ -170,6 +183,17 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
 	if (!clkdm->clktrctrl_mask)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		_enable_hwsup(clkdm);
+		return 0;
+	}
+
 	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
 
@@ -193,6 +217,17 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
 	if (!clkdm->clktrctrl_mask)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+	    (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+		omap3_clkdm_wakeup(clkdm);
+		return 0;
+	}
+
 	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
 				clkdm->clktrctrl_mask);
 
@@ -209,20 +244,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
 	return 0;
 }
 
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
 static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
 {
 	if (atomic_read(&clkdm->usecount) > 0)

arch/arm/mach-omap2/clockdomain44xx.c

@@ -113,6 +113,17 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
 	if (!clkdm->prcm_partition)
 		return 0;
 
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		omap4_clkdm_allow_idle(clkdm);
+		return 0;
+	}
+
 	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 

arch/arm/mach-omap2/clockdomains3xxx_data.c

@@ -387,14 +387,11 @@ static struct clockdomain per_am35x_clkdm = {
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 };
 
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
 static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
 	.pwrdm		= { .name = "emu_pwrdm" },
-	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
+	.flags		= (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP |
+			   CLKDM_MISSING_IDLE_REPORTING),
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 };
 

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -390,7 +390,8 @@ static struct clockdomain emu_sys_44xx_clkdm = {
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.cm_inst	  = OMAP4430_PRM_EMU_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
-	.flags		  = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
+	.flags		  = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP |
+			     CLKDM_MISSING_IDLE_REPORTING),
 };
 
 static struct clockdomain l3_dma_44xx_clkdm = {

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -218,6 +218,8 @@
 #define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_ST_OMAPCTRL_SHIFT			6
 #define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
+#define OMAP3430_ST_SAD2D_SHIFT				3
+#define OMAP3430_ST_SAD2D_MASK				(1 << 3)
 #define OMAP3430_ST_SDMA_SHIFT				2
 #define OMAP3430_ST_SDMA_MASK				(1 << 2)
 #define OMAP3430_ST_SDRC_SHIFT				1

arch/arm/mach-omap2/cm2xxx_3xxx.c

@@ -35,7 +35,7 @@
 #define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
 
 static const u8 cm_idlest_offs[] = {
-	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
 };
 
 u32 omap2_cm_read_mod_reg(s16 module, u16 idx)

arch/arm/mach-omap2/cm2xxx_3xxx.h

@@ -71,6 +71,7 @@
 #define OMAP24XX_CM_FCLKEN2				0x0004
 #define OMAP24XX_CM_ICLKEN4				0x001c
 #define OMAP24XX_CM_AUTOIDLE4				0x003c
+#define OMAP24XX_CM_IDLEST4				0x002c
 
 #define OMAP2430_CM_IDLEST3				0x0028
 

arch/arm/mach-omap2/control.h

@@ -354,6 +354,7 @@
 
 /* AM33XX CONTROL_STATUS bitfields (partial) */
 #define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT		22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH		0x2
 #define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK		(0x3 << 22)
 
 /* CONTROL OMAP STATUS register to identify OMAP3 features */

arch/arm/mach-omap2/devices.c

@@ -433,35 +433,24 @@ static void omap_init_mcspi(void)
 static inline void omap_init_mcspi(void) {}
 #endif
 
-static struct resource omap2_pmu_resource = {
-	.start	= 3 + OMAP_INTC_START,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct resource omap3_pmu_resource = {
-	.start	= 3 + OMAP_INTC_START,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device omap_pmu_device = {
-	.name		= "arm-pmu",
-	.id		= -1,
-	.num_resources	= 1,
-};
-
-static void omap_init_pmu(void)
+/**
+ * omap_init_rng - bind the RNG hwmod to the RNG omap_device
+ *
+ * Bind the RNG hwmod to the RNG omap_device.  No return value.
+ */
+static void omap_init_rng(void)
 {
-	if (cpu_is_omap24xx())
-		omap_pmu_device.resource = &omap2_pmu_resource;
-	else if (cpu_is_omap34xx())
-		omap_pmu_device.resource = &omap3_pmu_resource;
-	else
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+
+	oh = omap_hwmod_lookup("rng");
+	if (!oh)
 		return;
 
-	platform_device_register(&omap_pmu_device);
+	pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n");
 }
 
-
 #if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
 
 #ifdef CONFIG_ARCH_OMAP2
@@ -646,8 +635,8 @@ static int __init omap2_init_devices(void)
 		omap_init_mcpdm();
 		omap_init_mcspi();
 	}
-	omap_init_pmu();
 	omap_init_sti();
+	omap_init_rng();
 	omap_init_sham();
 	omap_init_aes();
 	omap_init_vout();

arch/arm/mach-omap2/display.c

@@ -488,7 +488,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk)
-			clk_enable(oc->_clk);
+			clk_prepare_enable(oc->_clk);
 
 	dispc_disable_outputs();
 
@@ -515,7 +515,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
 		if (oc->_clk)
-			clk_disable(oc->_clk);
+			clk_disable_unprepare(oc->_clk);
 
 	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
 

arch/arm/mach-omap2/dpll3xxx.c

@@ -63,8 +63,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	const struct dpll_data *dd;
 	int i = 0;
 	int ret = -EINVAL;
+	const char *clk_name;
 
 	dd = clk->dpll_data;
+	clk_name = __clk_get_name(clk);
 
 	state <<= __ffs(dd->idlest_mask);
 
@@ -76,10 +78,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 
 	if (i == MAX_DPLL_WAIT_TRIES) {
 		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
+		       clk_name, (state) ? "locked" : "bypassed");
 	} else {
 		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
+			 clk_name, (state) ? "locked" : "bypassed", i);
 
 		ret = 0;
 	}
@@ -93,7 +95,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = clk->dpll_data->clk_ref->rate / n;
+	fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
 
 	pr_debug("clock: fint is %lu\n", fint);
 
@@ -140,7 +142,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 	u8 state = 1;
 	int r = 0;
 
-	pr_debug("clock: locking DPLL %s\n", clk->name);
+	pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk));
 
 	dd = clk->dpll_data;
 	state <<= __ffs(dd->idlest_mask);
@@ -187,7 +189,7 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
 		return -EINVAL;
 
 	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
+		 __clk_get_name(clk));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -217,7 +219,7 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
 		return -EINVAL;
 
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
+	pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk));
 
 	ai = omap3_dpll_autoidle_read(clk);
 
@@ -245,7 +247,7 @@ static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
 {
 	unsigned long fint, clkinp; /* watch out for overflow */
 
-	clkinp = clk->parent->rate;
+	clkinp = __clk_get_rate(__clk_get_parent(clk));
 	fint = (clkinp / n) * m;
 
 	if (fint < 1000000000)
@@ -271,7 +273,7 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
 	unsigned long clkinp, sd; /* watch out for overflow */
 	int mod1, mod2;
 
-	clkinp = clk->parent->rate;
+	clkinp = __clk_get_rate(__clk_get_parent(clk));
 
 	/*
 	 * target sigma-delta to near 250MHz
@@ -380,16 +382,19 @@ int omap3_noncore_dpll_enable(struct clk *clk)
 {
 	int r;
 	struct dpll_data *dd;
+	struct clk *parent;
 
 	dd = clk->dpll_data;
 	if (!dd)
 		return -EINVAL;
 
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
+	parent = __clk_get_parent(clk);
+
+	if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) {
+		WARN_ON(parent != dd->clk_bypass);
 		r = _omap3_noncore_dpll_bypass(clk);
 	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
+		WARN_ON(parent != dd->clk_ref);
 		r = _omap3_noncore_dpll_lock(clk);
 	}
 	/*
@@ -432,7 +437,7 @@ void omap3_noncore_dpll_disable(struct clk *clk)
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk *new_parent = NULL;
-	unsigned long hw_rate;
+	unsigned long hw_rate, bypass_rate;
 	u16 freqsel = 0;
 	struct dpll_data *dd;
 	int ret;
@@ -456,7 +461,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	omap2_clk_enable(dd->clk_bypass);
 	omap2_clk_enable(dd->clk_ref);
 
-	if (dd->clk_bypass->rate == rate &&
+	bypass_rate = __clk_get_rate(dd->clk_bypass);
+	if (bypass_rate == rate &&
 	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
 		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
 
@@ -479,7 +485,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 		}
 
 		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
+			 __clk_get_name(clk), rate);
 
 		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
 						 dd->last_rounded_n, freqsel);
@@ -557,7 +563,7 @@ void omap3_dpll_allow_idle(struct clk *clk)
 
 	if (!dd->autoidle_reg) {
 		pr_debug("clock: DPLL %s: autoidle not supported\n",
-			clk->name);
+			__clk_get_name(clk));
 		return;
 	}
 
@@ -591,7 +597,7 @@ void omap3_dpll_deny_idle(struct clk *clk)
 
 	if (!dd->autoidle_reg) {
 		pr_debug("clock: DPLL %s: autoidle not supported\n",
-			clk->name);
+			__clk_get_name(clk));
 		return;
 	}
 
@@ -617,11 +623,12 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 	unsigned long rate;
 	u32 v;
 	struct clk *pclk;
+	unsigned long parent_rate;
 
 	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
+	pclk = __clk_get_parent(clk);
 	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
+		pclk = __clk_get_parent(pclk);
 
 	/* clk does not have a DPLL as a parent?  error in the clock data */
 	if (!pclk) {
@@ -633,12 +640,13 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 
 	WARN_ON(!dd->enable_mask);
 
+	parent_rate = __clk_get_rate(__clk_get_parent(clk));
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
-		rate = clk->parent->rate;
+		rate = parent_rate;
 	else
-		rate = clk->parent->rate * 2;
+		rate = parent_rate * 2;
 	return rate;
 }