Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

SoC-level changes for tegra and omap

This adds support for the new tegra30 SoC, as well as small
changes to support minor variations of existing omap SoCs.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  arm/tegra: Compile tegra_dt_init_irq only when CONFIG_OF
  arm/tegra: Make MACH_TEGRA_DT depend on ARCH_TEGRA_2x_SOC
  arm/tegra: Delete tegra_init_clock()
  arm/tegra: Fix section mismatch errors in tegra30 pinmux
  arm/tegra: Fix section mismatch errors in tegra20 pinmux
  arm/tegra: refresh defconfig for tegra30
  arm/tegra: add support for tegra30 based board cardhu
  arm/tegra: implement support for tegra30
  arm/tegra: pinmux tables and definitions for tegra30
  arm/tegra: add new fields to struct tegra_pingroup_desc
  arm/tegra: prepare pinmux code for multiple tegra variants
  arm/tegra: rename tegra20 pinmux files
  arm/tegra: generalize L2 cache initialization
  arm/tegra: use PMC reset
  arm/tegra: rename board-dt.c to board-dt-tegra20.c
  arm/tegra: prepare early init for multiple tegra variants
  arm/tegra: don't export clk_measure_input_freq
  arm/tegra: prepare clock code for multiple tegra variants
  arm/tegra: cleanup tegra20 support
  arm/tegra: clk_get should not be fatal
  ...

Fix up trivial conflict in arch/arm/mach-tegra/board-dt-tegra20.c

arch/arm/boot/dts/tegra-cardhu.dts

+/dts-v1/;
+
+/include/ "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu evaluation board";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	memory {
+		reg = < 0x80000000 0x40000000 >;
+	};
+
+	serial@70006000 {
+		clock-frequency = < 408000000 >;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+	};
+};

arch/arm/configs/tegra_defconfig

@@ -9,9 +9,8 @@ CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -20,6 +19,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_TEGRA_2x_SOC=y
+CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_MACH_HARMONY=y
 CONFIG_MACH_KAEN=y
 CONFIG_MACH_PAZ00=y
@@ -78,14 +79,12 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_R8169=y
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/arm/mach-omap2/Kconfig

@@ -78,8 +78,13 @@ config SOC_OMAP3430
 	default y
 	select ARCH_OMAP_OTG
 
-config SOC_OMAPTI816X
-	bool "TI816X support"
+config SOC_OMAPTI81XX
+	bool "TI81XX support"
+	depends on ARCH_OMAP3
+	default y
+
+config SOC_OMAPAM33XX
+	bool "AM33XX support"
 	depends on ARCH_OMAP3
 	default y
 
@@ -316,7 +321,7 @@ config MACH_OMAP_3630SDP
 
 config MACH_TI8168EVM
 	bool "TI8168 Evaluation Module"
-	depends on SOC_OMAPTI816X
+	depends on SOC_OMAPTI81XX
 	default y
 
 config MACH_OMAP_4430SDP

arch/arm/mach-omap2/board-ti8168evm.c

@@ -35,17 +35,12 @@ static void __init ti8168_evm_init(void)
 	omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
 }
 
-static void __init ti8168_evm_map_io(void)
-{
-	omapti816x_map_common_io();
-}
-
 MACHINE_START(TI8168EVM, "ti8168evm")
 	/* Maintainer: Texas Instruments */
 	.atag_offset	= 0x100,
-	.map_io		= ti8168_evm_map_io,
-	.init_early	= ti816x_init_early,
-	.init_irq	= ti816x_init_irq,
+	.map_io		= ti81xx_map_io,
+	.init_early	= ti81xx_init_early,
+	.init_irq	= ti81xx_init_irq,
 	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,
 	.restart	= omap_prcm_restart,

arch/arm/mach-omap2/clock.c

@@ -35,7 +35,7 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-u8 cpu_mask;
+u16 cpu_mask;
 
 /*
  * clkdm_control: if true, then when a clock is enabled in the

arch/arm/mach-omap2/clock.h

@@ -132,7 +132,7 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
 
-extern u8 cpu_mask;
+extern u16 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_dummy;

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3517,6 +3517,10 @@ int __init omap3xxx_clk_init(void)
 	} else if (cpu_is_ti816x()) {
 		cpu_mask = RATE_IN_TI816X;
 		cpu_clkflg = CK_TI816X;
+	} else if (cpu_is_am33xx()) {
+		cpu_mask = RATE_IN_AM33XX;
+	} else if (cpu_is_ti814x()) {
+		cpu_mask = RATE_IN_TI814X;
 	} else if (cpu_is_omap34xx()) {
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			cpu_mask = RATE_IN_3430ES1;
@@ -3600,7 +3604,7 @@ int __init omap3xxx_clk_init(void)
 	 * Lock DPLL5 -- here only until other device init code can
 	 * handle this
 	 */
-	if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0))
+	if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
 		omap3_clk_lock_dpll5();
 
 	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */

arch/arm/mach-omap2/common.c

@@ -110,23 +110,49 @@ void __init omap3_map_io(void)
 
 /*
  * Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI816X register for checking device ID (it adds 0x204 to tap base while
- * TI816X DEVICE ID register is at offset 0x600 from control base).
+ * TI81XX register for checking device ID (it adds 0x204 to tap base while
+ * TI81XX DEVICE ID register is at offset 0x600 from control base).
  */
-#define TI816X_TAP_BASE		(TI816X_CTRL_BASE + \
-				TI816X_CONTROL_DEVICE_ID - 0x204)
+#define TI81XX_TAP_BASE		(TI81XX_CTRL_BASE + \
+				TI81XX_CONTROL_DEVICE_ID - 0x204)
 
-static struct omap_globals ti816x_globals = {
+static struct omap_globals ti81xx_globals = {
 	.class  = OMAP343X_CLASS,
-	.tap    = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
-	.ctrl   = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
-	.prm    = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
-	.cm     = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+	.tap    = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
+	.ctrl   = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+	.prm    = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
+	.cm     = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
 };
 
-void __init omap2_set_globals_ti816x(void)
+void __init omap2_set_globals_ti81xx(void)
 {
-	__omap2_set_globals(&ti816x_globals);
+	__omap2_set_globals(&ti81xx_globals);
+}
+
+void __init ti81xx_map_io(void)
+{
+	omapti81xx_map_common_io();
+}
+
+#define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
+				TI81XX_CONTROL_DEVICE_ID - 0x204)
+
+static struct omap_globals am33xx_globals = {
+	.class  = AM335X_CLASS,
+	.tap    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
+	.ctrl   = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
+	.prm    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
+	.cm     = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
+};
+
+void __init omap2_set_globals_am33xx(void)
+{
+	__omap2_set_globals(&am33xx_globals);
+}
+
+void __init am33xx_map_io(void)
+{
+	omapam33xx_map_common_io();
 }
 #endif
 

arch/arm/mach-omap2/common.h

@@ -52,10 +52,18 @@ static inline void omap34xx_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
+#ifdef CONFIG_SOC_OMAPTI81XX
+extern void omapti81xx_map_common_io(void);
 #else
-static inline void omapti816x_map_common_io(void)
+static inline void omapti81xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPAM33XX
+extern void omapam33xx_map_common_io(void);
+#else
+static inline void omapam33xx_map_common_io(void)
 {
 }
 #endif
@@ -82,7 +90,7 @@ void omap35xx_init_early(void);
 void omap3630_init_early(void);
 void omap3_init_early(void);	/* Do not use this one */
 void am35xx_init_early(void);
-void ti816x_init_early(void);
+void ti81xx_init_early(void);
 void omap4430_init_early(void);
 void omap_prcm_restart(char, const char *);
 
@@ -107,7 +115,8 @@ void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
+void omap2_set_globals_ti81xx(void);
+void omap2_set_globals_am33xx(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
@@ -118,7 +127,9 @@ void omap2_set_globals_prcm(struct omap_globals *);
 void omap242x_map_io(void);
 void omap243x_map_io(void);
 void omap3_map_io(void);
+void am33xx_map_io(void);
 void omap4_map_io(void);
+void ti81xx_map_io(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
@@ -147,7 +158,7 @@ extern struct device *omap4_get_dsp_device(void);
 
 void omap2_init_irq(void);
 void omap3_init_irq(void);
-void ti816x_init_irq(void);
+void ti81xx_init_irq(void);
 extern int omap_irq_pending(void);
 void omap_intc_save_context(void);
 void omap_intc_restore_context(void);

arch/arm/mach-omap2/control.h

@@ -52,8 +52,8 @@
 #define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
 #define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
 
-/* TI816X spefic control submodules */
-#define TI816X_CONTROL_DEVCONF		0x600
+/* TI81XX spefic control submodules */
+#define TI81XX_CONTROL_DEVCONF		0x600
 
 /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
 
@@ -244,8 +244,8 @@
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
 
-/* TI816X CONTROL_DEVCONF register offsets */
-#define TI816X_CONTROL_DEVICE_ID	(TI816X_CONTROL_DEVCONF + 0x000)
+/* TI81XX CONTROL_DEVCONF register offsets */
+#define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
 
 /*
  * REVISIT: This list of registers is not comprehensive - there are more

arch/arm/mach-omap2/id.c

@@ -226,7 +226,7 @@ static void __init omap4_check_features(void)
 	}
 }
 
-static void __init ti816x_check_features(void)
+static void __init ti81xx_check_features(void)
 {
 	omap_features = OMAP3_HAS_NEON;
 }
@@ -340,6 +340,29 @@ static void __init omap3_check_revision(const char **cpu_rev)
 			break;
 		}
 		break;
+	case 0xb944:
+		omap_revision = AM335X_REV_ES1_0;
+		*cpu_rev = "1.0";
+	case 0xb8f2:
+		switch (rev) {
+		case 0:
+		/* FALLTHROUGH */
+		case 1:
+			omap_revision = TI8148_REV_ES1_0;
+			*cpu_rev = "1.0";
+			break;
+		case 2:
+			omap_revision = TI8148_REV_ES2_0;
+			*cpu_rev = "2.0";
+			break;
+		case 3:
+		/* FALLTHROUGH */
+		default:
+			omap_revision = TI8148_REV_ES2_1;
+			*cpu_rev = "2.1";
+			break;
+		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default */
 		omap_revision = OMAP3630_REV_ES1_2;
@@ -367,7 +390,7 @@ static void __init omap4_check_revision(void)
 	 * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
 	 * Use ARM register to detect the correct ES version
 	 */
-	if (!rev && (hawkeye != 0xb94e)) {
+	if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
 		idcode = read_cpuid(CPUID_ID);
 		rev = (idcode & 0xf) - 1;
 	}
@@ -389,8 +412,11 @@ static void __init omap4_check_revision(void)
 			omap_revision = OMAP4430_REV_ES2_1;
 			break;
 		case 4:
-		default:
 			omap_revision = OMAP4430_REV_ES2_2;
+			break;
+		case 6:
+		default:
+			omap_revision = OMAP4430_REV_ES2_3;
 		}
 		break;
 	case 0xb94e:
@@ -401,9 +427,17 @@ static void __init omap4_check_revision(void)
 			break;
 		}
 		break;
+	case 0xb975:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = OMAP4470_REV_ES1_0;
+			break;
+		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default */
-		omap_revision = OMAP4430_REV_ES2_2;
+		omap_revision = OMAP4430_REV_ES2_3;
 	}
 
 	pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@@ -432,6 +466,10 @@ static void __init omap3_cpuinfo(const char *cpu_rev)
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
 	} else if (cpu_is_ti816x()) {
 		cpu_name = "TI816X";
+	} else if (cpu_is_am335x()) {
+		cpu_name =  "AM335X";
+	} else if (cpu_is_ti814x()) {
+		cpu_name = "TI814X";
 	} else if (omap3_has_iva() && omap3_has_sgx()) {
 		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
 		cpu_name = "OMAP3430/3530";
@@ -472,11 +510,11 @@ void __init omap2_check_revision(void)
 	} else if (cpu_is_omap34xx()) {
 		omap3_check_revision(&cpu_rev);
 
-		/* TI816X doesn't have feature register */
-		if (!cpu_is_ti816x())
+		/* TI81XX doesn't have feature register */
+		if (!cpu_is_ti81xx())
 			omap3_check_features();
 		else
-			ti816x_check_features();
+			ti81xx_check_features();
 
 		omap3_cpuinfo(cpu_rev);
 		return;

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -66,11 +66,11 @@ omap_uart_lsr:	.word	0
 		beq	34f			@ configure OMAP3UART4
 		cmp	\rp, #OMAP4UART4	@ only on 44xx
 		beq	44f			@ configure OMAP4UART4
-		cmp	\rp, #TI816XUART1	@ ti816x UART offsets different
+		cmp	\rp, #TI81XXUART1	@ ti81Xx UART offsets different
 		beq	81f			@ configure UART1
-		cmp	\rp, #TI816XUART2	@ ti816x UART offsets different
+		cmp	\rp, #TI81XXUART2	@ ti81Xx UART offsets different
 		beq	82f			@ configure UART2
-		cmp	\rp, #TI816XUART3	@ ti816x UART offsets different
+		cmp	\rp, #TI81XXUART3	@ ti81Xx UART offsets different
 		beq	83f			@ configure UART3
 		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART
@@ -94,11 +94,11 @@ omap_uart_lsr:	.word	0
 		b	98f
 44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-81:		mov	\rp, #UART_OFFSET(TI816X_UART1_BASE)
+81:		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
 		b	98f
-82:		mov	\rp, #UART_OFFSET(TI816X_UART2_BASE)
+82:		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
 		b	98f
-83:		mov	\rp, #UART_OFFSET(TI816X_UART3_BASE)
+83:		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
 		b	98f
 
 95:		ldr	\rp, =ZOOM_UART_BASE

arch/arm/mach-omap2/io.c

@@ -176,14 +176,31 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef CONFIG_SOC_OMAPTI816X
-static struct map_desc omapti816x_io_desc[] __initdata = {
+#ifdef CONFIG_SOC_OMAPTI81XX
+static struct map_desc omapti81xx_io_desc[] __initdata = {
+	{
+		.virtual	= L4_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
+		.length		= L4_34XX_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
+#ifdef CONFIG_SOC_OMAPAM33XX
+static struct map_desc omapam33xx_io_desc[] __initdata = {
 	{
 		.virtual	= L4_34XX_VIRT,
 		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
 		.length		= L4_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
+	{
+		.virtual	= L4_WK_AM33XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_AM33XX_PHYS),
+		.length		= L4_WK_AM33XX_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 #endif
 
@@ -263,10 +280,17 @@ void __init omap34xx_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAPTI816X
-void __init omapti816x_map_common_io(void)
+#ifdef CONFIG_SOC_OMAPTI81XX
+void __init omapti81xx_map_common_io(void)
+{
+	iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPAM33XX
+void __init omapam33xx_map_common_io(void)
 {
-	iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
+	iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
 }
 #endif
 
@@ -418,9 +442,9 @@ void __init am35xx_init_early(void)
 	omap3_init_early();
 }
 
-void __init ti816x_init_early(void)
+void __init ti81xx_init_early(void)
 {
-	omap2_set_globals_ti816x();
+	omap2_set_globals_ti81xx();
 	omap_common_init_early();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();

arch/arm/mach-omap2/irq.c

@@ -193,7 +193,7 @@ void __init omap3_init_irq(void)
 	omap_init_irq(OMAP34XX_IC_BASE, 96);
 }
 
-void __init ti816x_init_irq(void)
+void __init ti81xx_init_irq(void)
 {
 	omap_init_irq(OMAP34XX_IC_BASE, 128);
 }

arch/arm/mach-omap2/opp2xxx.h

@@ -51,7 +51,7 @@ struct prcm_config {
 	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
 	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
 	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned char flags;
+	unsigned short flags;
 };
 
 

arch/arm/mach-omap2/serial.c

@@ -464,7 +464,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
-	if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
+	if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) {
 		u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
 		u32 wk_mask = 0;
 		u32 padconf = 0;
@@ -746,7 +746,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	 */
 	uart->regshift = p->regshift;
 	uart->membase = p->membase;
-	if (cpu_is_omap44xx() || cpu_is_ti816x())
+	if (cpu_is_omap44xx() || cpu_is_ti81xx())
 		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
 	else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
 			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
@@ -828,7 +828,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	}
 
 	/* Enable the MDR1 errata for OMAP3 */
-	if (cpu_is_omap34xx() && !cpu_is_ti816x())
+	if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx()))
 		uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
 }
 

arch/arm/mach-tegra/Kconfig

@@ -2,11 +2,8 @@ if ARCH_TEGRA
 
 comment "NVIDIA Tegra options"
 
-choice
-	prompt "Select Tegra processor family for target system"
-
 config ARCH_TEGRA_2x_SOC
-	bool "Tegra 2 family"
+	bool "Enable support for Tegra20 family"
 	select CPU_V7
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
@@ -17,22 +14,36 @@ config ARCH_TEGRA_2x_SOC
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
 
-endchoice
+config ARCH_TEGRA_3x_SOC
+	bool "Enable support for Tegra30 family"
+	select CPU_V7
+	select ARM_GIC
+	select ARCH_REQUIRE_GPIOLIB
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_SUPPORT
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
+	select USE_OF
+	help
+	  Support for NVIDIA Tegra T30 processor family, based on the
+	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
 
 config TEGRA_PCI
 	bool "PCI Express support"
+	depends on ARCH_TEGRA_2x_SOC
 	select PCI
 
 comment "Tegra board type"
 
 config MACH_HARMONY
        bool "Harmony board"
+       depends on ARCH_TEGRA_2x_SOC
        select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
        help
          Support for nVidia Harmony development platform
 
 config MACH_KAEN
        bool "Kaen board"
+       depends on ARCH_TEGRA_2x_SOC
        select MACH_SEABOARD
        select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
        help
@@ -40,11 +51,13 @@ config MACH_KAEN
 
 config MACH_PAZ00
        bool "Paz00 board"
+       depends on ARCH_TEGRA_2x_SOC
        help
          Support for the Toshiba AC100/Dynabook AZ netbook
 
 config MACH_SEABOARD
        bool "Seaboard board"
+       depends on ARCH_TEGRA_2x_SOC
        select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
        help
          Support for nVidia Seaboard development platform. It will
@@ -52,25 +65,29 @@ config MACH_SEABOARD
 	 have large similarities with the seaboard design.
 
 config MACH_TEGRA_DT
-	bool "Generic Tegra board (FDT support)"
+	bool "Generic Tegra20 board (FDT support)"
+	depends on ARCH_TEGRA_2x_SOC
 	select USE_OF
 	help
-	  Support for generic nVidia Tegra boards using Flattened Device Tree
+	  Support for generic NVIDIA Tegra20 boards using Flattened Device Tree
 
 config MACH_TRIMSLICE
        bool "TrimSlice board"
+       depends on ARCH_TEGRA_2x_SOC
        select TEGRA_PCI
        help
          Support for CompuLab TrimSlice platform
 
 config MACH_WARIO
        bool "Wario board"
+       depends on ARCH_TEGRA_2x_SOC
        select MACH_SEABOARD
        help
          Support for the Wario version of Seaboard
 
 config MACH_VENTANA
        bool "Ventana board"
+       depends on ARCH_TEGRA_2x_SOC
        select MACH_TEGRA_DT
        help
          Support for the nVidia Ventana development platform

arch/arm/mach-tegra/Makefile

@@ -5,12 +5,13 @@ obj-y                                   += irq.o
 obj-y                                   += clock.o
 obj-y                                   += timer.o
 obj-y                                   += pinmux.o
-obj-y                                   += powergate.o
 obj-y					+= fuse.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += clock.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= powergate.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-t2-tables.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-tegra20-tables.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pinmux-tegra30-tables.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
 obj-$(CONFIG_SMP)                       += platsmp.o localtimer.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
@@ -29,7 +30,7 @@ obj-$(CONFIG_MACH_PAZ00)		+= board-paz00-pinmux.o
 obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard.o
 obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard-pinmux.o
 
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt-tegra20.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-harmony-pinmux.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-seaboard-pinmux.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-paz00-pinmux.o

arch/arm/mach-tegra/Makefile.boot

@@ -7,3 +7,4 @@ dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb
 dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
 dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb
 dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb

arch/arm/mach-tegra/board-dt.c → arch/arm/mach-tegra/board-dt-tegra20.c

@@ -53,17 +53,6 @@ void seaboard_pinmux_init(void);
 void trimslice_pinmux_init(void);
 void ventana_pinmux_init(void);
 
-static const struct of_device_id tegra_dt_irq_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
-	{ }
-};
-
-void __init tegra_dt_init_irq(void)
-{
-	tegra_init_irq();
-	of_irq_init(tegra_dt_irq_match);
-}
-
 struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
@@ -139,7 +128,7 @@ static void __init tegra_dt_init(void)
 		"Unknown platform! Pinmuxing not initialized\n");
 }
 
-static const char * tegra_dt_board_compat[] = {
+static const char *tegra20_dt_board_compat[] = {
 	"compulab,trimslice",
 	"nvidia,harmony",
 	"compal,paz00",
@@ -148,13 +137,13 @@ static const char * tegra_dt_board_compat[] = {
 	NULL
 };
 
-DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
+DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
 	.map_io		= tegra_map_common_io,
-	.init_early	= tegra_init_early,
+	.init_early	= tegra20_init_early,
 	.init_irq	= tegra_dt_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
 	.restart	= tegra_assert_system_reset,
-	.dt_compat	= tegra_dt_board_compat,
+	.dt_compat	= tegra20_dt_board_compat,
 MACHINE_END

arch/arm/mach-tegra/board-dt-tegra30.c

+/*
+ * arch/arm/mach-tegra/board-dt-tegra30.c
+ *
+ * NVIDIA Tegra30 device tree board support
+ *
+ * Copyright (C) 2011 NVIDIA Corporation
+ *
+ * Derived from:
+ *
+ * arch/arm/mach-tegra/board-dt-tegra20.c
+ *
+ * Copyright (C) 2010 Secret Lab Technologies, Ltd.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include "board.h"
+
+static struct of_device_id tegra_dt_match_table[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{}
+};
+
+static void __init tegra30_dt_init(void)
+{
+	of_platform_populate(NULL, tegra_dt_match_table,
+				NULL, NULL);
+}
+
+static const char *tegra30_dt_board_compat[] = {
+	"nvidia,cardhu",
+	NULL
+};
+
+DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
+	.map_io		= tegra_map_common_io,
+	.init_early	= tegra30_init_early,
+	.init_irq	= tegra_dt_init_irq,
+	.handle_irq	= gic_handle_irq,
+	.timer		= &tegra_timer,
+	.init_machine	= tegra30_dt_init,
+	.restart	= tegra_assert_system_reset,
+	.dt_compat	= tegra30_dt_board_compat,
+MACHINE_END

arch/arm/mach-tegra/board-harmony-pcie.c

@@ -23,6 +23,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/pinmux.h>
+#include <mach/pinmux-tegra20.h>
 #include "board.h"
 #include "board-harmony.h"
 

arch/arm/mach-tegra/board-harmony-pinmux.c

@@ -19,6 +19,7 @@
 #include <linux/of.h>
 
 #include <mach/pinmux.h>
+#include <mach/pinmux-tegra20.h>
 
 #include "gpio-names.h"
 #include "board-harmony.h"

arch/arm/mach-tegra/board-harmony.c

@@ -186,7 +186,7 @@ MACHINE_START(HARMONY, "harmony")
 	.atag_offset	= 0x100,
 	.fixup		= tegra_harmony_fixup,
 	.map_io         = tegra_map_common_io,
-	.init_early	= tegra_init_early,
+	.init_early	= tegra20_init_early,
 	.init_irq       = tegra_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,

arch/arm/mach-tegra/board-paz00-pinmux.c

@@ -19,6 +19,7 @@
 #include <linux/of.h>
 
 #include <mach/pinmux.h>
+#include <mach/pinmux-tegra20.h>
 
 #include "gpio-names.h"
 #include "board-paz00.h"

arch/arm/mach-tegra/board-paz00.c

@@ -189,7 +189,7 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
 	.atag_offset	= 0x100,
 	.fixup		= tegra_paz00_fixup,
 	.map_io         = tegra_map_common_io,
-	.init_early	= tegra_init_early,
+	.init_early	= tegra20_init_early,
 	.init_irq       = tegra_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,

arch/arm/mach-tegra/board-seaboard-pinmux.c

@@ -19,7 +19,7 @@
 #include <linux/of.h>
 
 #include <mach/pinmux.h>
-#include <mach/pinmux-t2.h>
+#include <mach/pinmux-tegra20.h>
 
 #include "gpio-names.h"
 #include "board-seaboard.h"

arch/arm/mach-tegra/board-seaboard.c

@@ -283,7 +283,7 @@ static void __init tegra_wario_init(void)
 MACHINE_START(SEABOARD, "seaboard")
 	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
-	.init_early     = tegra_init_early,
+	.init_early     = tegra20_init_early,
 	.init_irq       = tegra_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
@@ -294,7 +294,7 @@ MACHINE_END
 MACHINE_START(KAEN, "kaen")
 	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
-	.init_early     = tegra_init_early,
+	.init_early     = tegra20_init_early,
 	.init_irq       = tegra_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
@@ -305,7 +305,7 @@ MACHINE_END
 MACHINE_START(WARIO, "wario")
 	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
-	.init_early     = tegra_init_early,
+	.init_early     = tegra20_init_early,
 	.init_irq       = tegra_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,

arch/arm/mach-tegra/board-trimslice-pinmux.c

@@ -19,6 +19,7 @@
 #include <linux/of.h>
 
 #include <mach/pinmux.h>
+#include <mach/pinmux-tegra20.h>
 
 #include "gpio-names.h"
 #include "board-trimslice.h"

arch/arm/mach-tegra/board-trimslice.c

@@ -175,7 +175,7 @@ MACHINE_START(TRIMSLICE, "trimslice")
 	.atag_offset	= 0x100,
 	.fixup		= tegra_trimslice_fixup,
 	.map_io         = tegra_map_common_io,
-	.init_early	= tegra_init_early,
+	.init_early	= tegra20_init_early,
 	.init_irq       = tegra_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,

arch/arm/mach-tegra/board.h

@@ -25,10 +25,11 @@
 
 void tegra_assert_system_reset(char mode, const char *cmd);
 
-void __init tegra_init_early(void);
+void __init tegra20_init_early(void);
+void __init tegra30_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
-void __init tegra_init_clock(void);
+void __init tegra_dt_init_irq(void);
 int __init tegra_pcie_init(bool init_port0, bool init_port1);
 
 extern struct sys_timer tegra_timer;

arch/arm/mach-tegra/clock.c

@@ -387,35 +387,18 @@ EXPORT_SYMBOL(tegra_clk_init_from_table);
 
 void tegra_periph_reset_deassert(struct clk *c)
 {
-	tegra2_periph_reset_deassert(c);
+	BUG_ON(!c->ops->reset);
+	c->ops->reset(c, false);
 }
 EXPORT_SYMBOL(tegra_periph_reset_deassert);
 
 void tegra_periph_reset_assert(struct clk *c)
 {
-	tegra2_periph_reset_assert(c);
+	BUG_ON(!c->ops->reset);
+	c->ops->reset(c, true);
 }
 EXPORT_SYMBOL(tegra_periph_reset_assert);
 
-void __init tegra_init_clock(void)
-{
-	tegra2_init_clocks();
-}
-
-/*
- * The SDMMC controllers have extra bits in the clock source register that
- * adjust the delay between the clock and data to compenstate for delays
- * on the PCB.
- */
-void tegra_sdmmc_tap_delay(struct clk *c, int delay)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-	tegra2_sdmmc_tap_delay(c, delay);
-	spin_unlock_irqrestore(&c->spinlock, flags);
-}
-
 #ifdef CONFIG_DEBUG_FS
 
 static int __clk_lock_all_spinlocks(void)

arch/arm/mach-tegra/clock.h

@@ -146,15 +146,11 @@ struct tegra_clk_init_table {
 };
 
 void tegra2_init_clocks(void);
-void tegra2_periph_reset_deassert(struct clk *c);
-void tegra2_periph_reset_assert(struct clk *c);
 void clk_init(struct clk *clk);
 struct clk *tegra_get_clock_by_name(const char *name);
-unsigned long clk_measure_input_freq(void);
 int clk_reparent(struct clk *c, struct clk *parent);
 void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
 unsigned long clk_get_rate_locked(struct clk *c);
 int clk_set_rate_locked(struct clk *c, unsigned long rate);
-void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
 
 #endif

arch/arm/mach-tegra/common.c

 /*
- * arch/arm/mach-tegra/board-harmony.c
+ * arch/arm/mach-tegra/common.c
  *
  * Copyright (C) 2010 Google, Inc.
  *
@@ -21,8 +21,10 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/of_irq.h>
 
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
 
 #include <mach/iomap.h>
 #include <mach/system.h>
@@ -31,18 +33,31 @@
 #include "clock.h"
 #include "fuse.h"
 
+#ifdef CONFIG_OF
+static const struct of_device_id tegra_dt_irq_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ }
+};
+
+void __init tegra_dt_init_irq(void)
+{
+	tegra_init_irq();
+	of_irq_init(tegra_dt_irq_match);
+}
+#endif
+
 void tegra_assert_system_reset(char mode, const char *cmd)
 {
-	void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04);
+	void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0);
 	u32 reg;
 
-	/* use *_related to avoid spinlock since caches are off */
 	reg = readl_relaxed(reset);
-	reg |= 0x04;
+	reg |= 0x10;
 	writel_relaxed(reg, reset);
 }
 
-static __initdata struct tegra_clk_init_table common_clk_init_table[] = {
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "clk_m",	NULL,		0,		true },
 	{ "pll_p",	"clk_m",	216000000,	true },
@@ -58,24 +73,38 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = {
 	{ "cpu",	NULL,		0,		true },
 	{ NULL,		NULL,		0,		0},
 };
+#endif
 
-static void __init tegra_init_cache(void)
+static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
 {
 #ifdef CONFIG_CACHE_L2X0
 	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
+	u32 aux_ctrl, cache_type;
+
+	writel_relaxed(tag_latency, p + L2X0_TAG_LATENCY_CTRL);
+	writel_relaxed(data_latency, p + L2X0_DATA_LATENCY_CTRL);
 
-	writel_relaxed(0x331, p + L2X0_TAG_LATENCY_CTRL);
-	writel_relaxed(0x441, p + L2X0_DATA_LATENCY_CTRL);
+	cache_type = readl(p + L2X0_CACHE_TYPE);
+	aux_ctrl = (cache_type & 0x700) << (17-8);
+	aux_ctrl |= 0x6C000001;
 
-	l2x0_init(p, 0x6C080001, 0x8200c3fe);
+	l2x0_init(p, aux_ctrl, 0x8200c3fe);
 #endif
 
 }
 
-void __init tegra_init_early(void)
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+void __init tegra20_init_early(void)
 {
 	tegra_init_fuse();
-	tegra_init_clock();
-	tegra_clk_init_from_table(common_clk_init_table);
-	tegra_init_cache();
+	tegra2_init_clocks();
+	tegra_clk_init_from_table(tegra20_clk_init_table);
+	tegra_init_cache(0x331, 0x441);
+}
+#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+void __init tegra30_init_early(void)
+{
+	tegra_init_cache(0x441, 0x551);
 }
+#endif

arch/arm/mach-tegra/include/mach/clk.h

@@ -26,6 +26,6 @@ void tegra_periph_reset_deassert(struct clk *c);
 void tegra_periph_reset_assert(struct clk *c);
 
 unsigned long clk_get_rate_all_locked(struct clk *c);
-void tegra_sdmmc_tap_delay(struct clk *c, int delay);
+void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
 
 #endif

arch/arm/mach-tegra/include/mach/irqs.h

@@ -25,7 +25,6 @@
 
 #define IRQ_LOCALTIMER                  29
 
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
 /* Primary Interrupt Controller */
 #define INT_PRI_BASE			(INT_GIC_BASE + 32)
 #define INT_TMR1			(INT_PRI_BASE + 0)
@@ -178,6 +177,5 @@
 #define NR_BOARD_IRQS			32
 
 #define NR_IRQS				(INT_BOARD_BASE + NR_BOARD_IRQS)
-#endif
 
 #endif

arch/arm/mach-tegra/include/mach/pinmux-t2.h → arch/arm/mach-tegra/include/mach/pinmux-tegra20.h

 /*
- * linux/arch/arm/mach-tegra/include/mach/pinmux-t2.h
+ * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
  *
  * Copyright (C) 2010 Google, Inc.
  *
@@ -14,8 +14,8 @@
  *
  */
 
-#ifndef __MACH_TEGRA_PINMUX_T2_H
-#define __MACH_TEGRA_PINMUX_T2_H
+#ifndef __MACH_TEGRA_PINMUX_TEGRA20_H
+#define __MACH_TEGRA_PINMUX_TEGRA20_H
 
 enum tegra_pingroup {
 	TEGRA_PINGROUP_ATA = 0,

arch/arm/mach-tegra/include/mach/pinmux-tegra30.h

+/*
+ * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010,2011 Nvidia, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_PINMUX_TEGRA30_H
+#define __MACH_TEGRA_PINMUX_TEGRA30_H
+
+enum tegra_pingroup {
+	TEGRA_PINGROUP_ULPI_DATA0 = 0,
+	TEGRA_PINGROUP_ULPI_DATA1,
+	TEGRA_PINGROUP_ULPI_DATA2,
+	TEGRA_PINGROUP_ULPI_DATA3,
+	TEGRA_PINGROUP_ULPI_DATA4,
+	TEGRA_PINGROUP_ULPI_DATA5,
+	TEGRA_PINGROUP_ULPI_DATA6,
+	TEGRA_PINGROUP_ULPI_DATA7,
+	TEGRA_PINGROUP_ULPI_CLK,
+	TEGRA_PINGROUP_ULPI_DIR,
+	TEGRA_PINGROUP_ULPI_NXT,
+	TEGRA_PINGROUP_ULPI_STP,
+	TEGRA_PINGROUP_DAP3_FS,
+	TEGRA_PINGROUP_DAP3_DIN,
+	TEGRA_PINGROUP_DAP3_DOUT,
+	TEGRA_PINGROUP_DAP3_SCLK,
+	TEGRA_PINGROUP_GPIO_PV0,
+	TEGRA_PINGROUP_GPIO_PV1,
+	TEGRA_PINGROUP_SDMMC1_CLK,
+	TEGRA_PINGROUP_SDMMC1_CMD,
+	TEGRA_PINGROUP_SDMMC1_DAT3,
+	TEGRA_PINGROUP_SDMMC1_DAT2,
+	TEGRA_PINGROUP_SDMMC1_DAT1,
+	TEGRA_PINGROUP_SDMMC1_DAT0,
+	TEGRA_PINGROUP_GPIO_PV2,
+	TEGRA_PINGROUP_GPIO_PV3,
+	TEGRA_PINGROUP_CLK2_OUT,
+	TEGRA_PINGROUP_CLK2_REQ,
+	TEGRA_PINGROUP_LCD_PWR1,
+	TEGRA_PINGROUP_LCD_PWR2,
+	TEGRA_PINGROUP_LCD_SDIN,
+	TEGRA_PINGROUP_LCD_SDOUT,
+	TEGRA_PINGROUP_LCD_WR_N,
+	TEGRA_PINGROUP_LCD_CS0_N,
+	TEGRA_PINGROUP_LCD_DC0,
+	TEGRA_PINGROUP_LCD_SCK,
+	TEGRA_PINGROUP_LCD_PWR0,
+	TEGRA_PINGROUP_LCD_PCLK,
+	TEGRA_PINGROUP_LCD_DE,
+	TEGRA_PINGROUP_LCD_HSYNC,
+	TEGRA_PINGROUP_LCD_VSYNC,
+	TEGRA_PINGROUP_LCD_D0,
+	TEGRA_PINGROUP_LCD_D1,
+	TEGRA_PINGROUP_LCD_D2,
+	TEGRA_PINGROUP_LCD_D3,
+	TEGRA_PINGROUP_LCD_D4,
+	TEGRA_PINGROUP_LCD_D5,
+	TEGRA_PINGROUP_LCD_D6,
+	TEGRA_PINGROUP_LCD_D7,
+	TEGRA_PINGROUP_LCD_D8,
+	TEGRA_PINGROUP_LCD_D9,
+	TEGRA_PINGROUP_LCD_D10,
+	TEGRA_PINGROUP_LCD_D11,
+	TEGRA_PINGROUP_LCD_D12,
+	TEGRA_PINGROUP_LCD_D13,
+	TEGRA_PINGROUP_LCD_D14,
+	TEGRA_PINGROUP_LCD_D15,
+	TEGRA_PINGROUP_LCD_D16,
+	TEGRA_PINGROUP_LCD_D17,
+	TEGRA_PINGROUP_LCD_D18,
+	TEGRA_PINGROUP_LCD_D19,
+	TEGRA_PINGROUP_LCD_D20,
+	TEGRA_PINGROUP_LCD_D21,
+	TEGRA_PINGROUP_LCD_D22,
+	TEGRA_PINGROUP_LCD_D23,
+	TEGRA_PINGROUP_LCD_CS1_N,
+	TEGRA_PINGROUP_LCD_M1,
+	TEGRA_PINGROUP_LCD_DC1,
+	TEGRA_PINGROUP_HDMI_INT,
+	TEGRA_PINGROUP_DDC_SCL,
+	TEGRA_PINGROUP_DDC_SDA,
+	TEGRA_PINGROUP_CRT_HSYNC,
+	TEGRA_PINGROUP_CRT_VSYNC,
+	TEGRA_PINGROUP_VI_D0,
+	TEGRA_PINGROUP_VI_D1,
+	TEGRA_PINGROUP_VI_D2,
+	TEGRA_PINGROUP_VI_D3,
+	TEGRA_PINGROUP_VI_D4,
+	TEGRA_PINGROUP_VI_D5,
+	TEGRA_PINGROUP_VI_D6,
+	TEGRA_PINGROUP_VI_D7,
+	TEGRA_PINGROUP_VI_D8,
+	TEGRA_PINGROUP_VI_D9,
+	TEGRA_PINGROUP_VI_D10,
+	TEGRA_PINGROUP_VI_D11,
+	TEGRA_PINGROUP_VI_PCLK,
+	TEGRA_PINGROUP_VI_MCLK,
+	TEGRA_PINGROUP_VI_VSYNC,
+	TEGRA_PINGROUP_VI_HSYNC,
+	TEGRA_PINGROUP_UART2_RXD,
+	TEGRA_PINGROUP_UART2_TXD,
+	TEGRA_PINGROUP_UART2_RTS_N,
+	TEGRA_PINGROUP_UART2_CTS_N,
+	TEGRA_PINGROUP_UART3_TXD,
+	TEGRA_PINGROUP_UART3_RXD,
+	TEGRA_PINGROUP_UART3_CTS_N,
+	TEGRA_PINGROUP_UART3_RTS_N,
+	TEGRA_PINGROUP_GPIO_PU0,
+	TEGRA_PINGROUP_GPIO_PU1,
+	TEGRA_PINGROUP_GPIO_PU2,
+	TEGRA_PINGROUP_GPIO_PU3,
+	TEGRA_PINGROUP_GPIO_PU4,
+	TEGRA_PINGROUP_GPIO_PU5,
+	TEGRA_PINGROUP_GPIO_PU6,
+	TEGRA_PINGROUP_GEN1_I2C_SDA,
+	TEGRA_PINGROUP_GEN1_I2C_SCL,
+	TEGRA_PINGROUP_DAP4_FS,
+	TEGRA_PINGROUP_DAP4_DIN,
+	TEGRA_PINGROUP_DAP4_DOUT,
+	TEGRA_PINGROUP_DAP4_SCLK,
+	TEGRA_PINGROUP_CLK3_OUT,
+	TEGRA_PINGROUP_CLK3_REQ,
+	TEGRA_PINGROUP_GMI_WP_N,
+	TEGRA_PINGROUP_GMI_IORDY,
+	TEGRA_PINGROUP_GMI_WAIT,
+	TEGRA_PINGROUP_GMI_ADV_N,
+	TEGRA_PINGROUP_GMI_CLK,
+	TEGRA_PINGROUP_GMI_CS0_N,
+	TEGRA_PINGROUP_GMI_CS1_N,
+	TEGRA_PINGROUP_GMI_CS2_N,
+	TEGRA_PINGROUP_GMI_CS3_N,
+	TEGRA_PINGROUP_GMI_CS4_N,
+	TEGRA_PINGROUP_GMI_CS6_N,
+	TEGRA_PINGROUP_GMI_CS7_N,
+	TEGRA_PINGROUP_GMI_AD0,
+	TEGRA_PINGROUP_GMI_AD1,
+	TEGRA_PINGROUP_GMI_AD2,
+	TEGRA_PINGROUP_GMI_AD3,
+	TEGRA_PINGROUP_GMI_AD4,
+	TEGRA_PINGROUP_GMI_AD5,
+	TEGRA_PINGROUP_GMI_AD6,
+	TEGRA_PINGROUP_GMI_AD7,
+	TEGRA_PINGROUP_GMI_AD8,
+	TEGRA_PINGROUP_GMI_AD9,
+	TEGRA_PINGROUP_GMI_AD10,
+	TEGRA_PINGROUP_GMI_AD11,
+	TEGRA_PINGROUP_GMI_AD12,
+	TEGRA_PINGROUP_GMI_AD13,
+	TEGRA_PINGROUP_GMI_AD14,
+	TEGRA_PINGROUP_GMI_AD15,
+	TEGRA_PINGROUP_GMI_A16,
+	TEGRA_PINGROUP_GMI_A17,
+	TEGRA_PINGROUP_GMI_A18,
+	TEGRA_PINGROUP_GMI_A19,
+	TEGRA_PINGROUP_GMI_WR_N,
+	TEGRA_PINGROUP_GMI_OE_N,
+	TEGRA_PINGROUP_GMI_DQS,
+	TEGRA_PINGROUP_GMI_RST_N,
+	TEGRA_PINGROUP_GEN2_I2C_SCL,
+	TEGRA_PINGROUP_GEN2_I2C_SDA,
+	TEGRA_PINGROUP_SDMMC4_CLK,
+	TEGRA_PINGROUP_SDMMC4_CMD,
+	TEGRA_PINGROUP_SDMMC4_DAT0,
+	TEGRA_PINGROUP_SDMMC4_DAT1,
+	TEGRA_PINGROUP_SDMMC4_DAT2,
+	TEGRA_PINGROUP_SDMMC4_DAT3,
+	TEGRA_PINGROUP_SDMMC4_DAT4,
+	TEGRA_PINGROUP_SDMMC4_DAT5,
+	TEGRA_PINGROUP_SDMMC4_DAT6,
+	TEGRA_PINGROUP_SDMMC4_DAT7,
+	TEGRA_PINGROUP_SDMMC4_RST_N,
+	TEGRA_PINGROUP_CAM_MCLK,
+	TEGRA_PINGROUP_GPIO_PCC1,
+	TEGRA_PINGROUP_GPIO_PBB0,
+	TEGRA_PINGROUP_CAM_I2C_SCL,
+	TEGRA_PINGROUP_CAM_I2C_SDA,
+	TEGRA_PINGROUP_GPIO_PBB3,
+	TEGRA_PINGROUP_GPIO_PBB4,
+	TEGRA_PINGROUP_GPIO_PBB5,
+	TEGRA_PINGROUP_GPIO_PBB6,
+	TEGRA_PINGROUP_GPIO_PBB7,
+	TEGRA_PINGROUP_GPIO_PCC2,
+	TEGRA_PINGROUP_JTAG_RTCK,
+	TEGRA_PINGROUP_PWR_I2C_SCL,
+	TEGRA_PINGROUP_PWR_I2C_SDA,
+	TEGRA_PINGROUP_KB_ROW0,
+	TEGRA_PINGROUP_KB_ROW1,
+	TEGRA_PINGROUP_KB_ROW2,
+	TEGRA_PINGROUP_KB_ROW3,
+	TEGRA_PINGROUP_KB_ROW4,
+	TEGRA_PINGROUP_KB_ROW5,
+	TEGRA_PINGROUP_KB_ROW6,
+	TEGRA_PINGROUP_KB_ROW7,
+	TEGRA_PINGROUP_KB_ROW8,
+	TEGRA_PINGROUP_KB_ROW9,
+	TEGRA_PINGROUP_KB_ROW10,
+	TEGRA_PINGROUP_KB_ROW11,
+	TEGRA_PINGROUP_KB_ROW12,
+	TEGRA_PINGROUP_KB_ROW13,
+	TEGRA_PINGROUP_KB_ROW14,
+	TEGRA_PINGROUP_KB_ROW15,
+	TEGRA_PINGROUP_KB_COL0,
+	TEGRA_PINGROUP_KB_COL1,
+	TEGRA_PINGROUP_KB_COL2,
+	TEGRA_PINGROUP_KB_COL3,
+	TEGRA_PINGROUP_KB_COL4,
+	TEGRA_PINGROUP_KB_COL5,
+	TEGRA_PINGROUP_KB_COL6,
+	TEGRA_PINGROUP_KB_COL7,
+	TEGRA_PINGROUP_CLK_32K_OUT,
+	TEGRA_PINGROUP_SYS_CLK_REQ,
+	TEGRA_PINGROUP_CORE_PWR_REQ,
+	TEGRA_PINGROUP_CPU_PWR_REQ,
+	TEGRA_PINGROUP_PWR_INT_N,
+	TEGRA_PINGROUP_CLK_32K_IN,
+	TEGRA_PINGROUP_OWR,
+	TEGRA_PINGROUP_DAP1_FS,
+	TEGRA_PINGROUP_DAP1_DIN,
+	TEGRA_PINGROUP_DAP1_DOUT,
+	TEGRA_PINGROUP_DAP1_SCLK,
+	TEGRA_PINGROUP_CLK1_REQ,
+	TEGRA_PINGROUP_CLK1_OUT,
+	TEGRA_PINGROUP_SPDIF_IN,
+	TEGRA_PINGROUP_SPDIF_OUT,
+	TEGRA_PINGROUP_DAP2_FS,
+	TEGRA_PINGROUP_DAP2_DIN,
+	TEGRA_PINGROUP_DAP2_DOUT,
+	TEGRA_PINGROUP_DAP2_SCLK,
+	TEGRA_PINGROUP_SPI2_MOSI,
+	TEGRA_PINGROUP_SPI2_MISO,
+	TEGRA_PINGROUP_SPI2_CS0_N,
+	TEGRA_PINGROUP_SPI2_SCK,
+	TEGRA_PINGROUP_SPI1_MOSI,
+	TEGRA_PINGROUP_SPI1_SCK,
+	TEGRA_PINGROUP_SPI1_CS0_N,
+	TEGRA_PINGROUP_SPI1_MISO,
+	TEGRA_PINGROUP_SPI2_CS1_N,
+	TEGRA_PINGROUP_SPI2_CS2_N,
+	TEGRA_PINGROUP_SDMMC3_CLK,
+	TEGRA_PINGROUP_SDMMC3_CMD,
+	TEGRA_PINGROUP_SDMMC3_DAT0,
+	TEGRA_PINGROUP_SDMMC3_DAT1,
+	TEGRA_PINGROUP_SDMMC3_DAT2,
+	TEGRA_PINGROUP_SDMMC3_DAT3,
+	TEGRA_PINGROUP_SDMMC3_DAT4,
+	TEGRA_PINGROUP_SDMMC3_DAT5,
+	TEGRA_PINGROUP_SDMMC3_DAT6,
+	TEGRA_PINGROUP_SDMMC3_DAT7,
+	TEGRA_PINGROUP_PEX_L0_PRSNT_N,
+	TEGRA_PINGROUP_PEX_L0_RST_N,
+	TEGRA_PINGROUP_PEX_L0_CLKREQ_N,
+	TEGRA_PINGROUP_PEX_WAKE_N,
+	TEGRA_PINGROUP_PEX_L1_PRSNT_N,
+	TEGRA_PINGROUP_PEX_L1_RST_N,
+	TEGRA_PINGROUP_PEX_L1_CLKREQ_N,
+	TEGRA_PINGROUP_PEX_L2_PRSNT_N,
+	TEGRA_PINGROUP_PEX_L2_RST_N,
+	TEGRA_PINGROUP_PEX_L2_CLKREQ_N,
+	TEGRA_PINGROUP_HDMI_CEC,
+	TEGRA_MAX_PINGROUP,
+};
+
+enum tegra_drive_pingroup {
+	TEGRA_DRIVE_PINGROUP_AO1 = 0,
+	TEGRA_DRIVE_PINGROUP_AO2,
+	TEGRA_DRIVE_PINGROUP_AT1,
+	TEGRA_DRIVE_PINGROUP_AT2,
+	TEGRA_DRIVE_PINGROUP_AT3,
+	TEGRA_DRIVE_PINGROUP_AT4,
+	TEGRA_DRIVE_PINGROUP_AT5,
+	TEGRA_DRIVE_PINGROUP_CDEV1,
+	TEGRA_DRIVE_PINGROUP_CDEV2,
+	TEGRA_DRIVE_PINGROUP_CSUS,
+	TEGRA_DRIVE_PINGROUP_DAP1,
+	TEGRA_DRIVE_PINGROUP_DAP2,
+	TEGRA_DRIVE_PINGROUP_DAP3,
+	TEGRA_DRIVE_PINGROUP_DAP4,
+	TEGRA_DRIVE_PINGROUP_DBG,
+	TEGRA_DRIVE_PINGROUP_LCD1,
+	TEGRA_DRIVE_PINGROUP_LCD2,
+	TEGRA_DRIVE_PINGROUP_SDIO2,
+	TEGRA_DRIVE_PINGROUP_SDIO3,
+	TEGRA_DRIVE_PINGROUP_SPI,
+	TEGRA_DRIVE_PINGROUP_UAA,
+	TEGRA_DRIVE_PINGROUP_UAB,
+	TEGRA_DRIVE_PINGROUP_UART2,
+	TEGRA_DRIVE_PINGROUP_UART3,
+	TEGRA_DRIVE_PINGROUP_VI1,
+	TEGRA_DRIVE_PINGROUP_SDIO1,
+	TEGRA_DRIVE_PINGROUP_CRT,
+	TEGRA_DRIVE_PINGROUP_DDC,
+	TEGRA_DRIVE_PINGROUP_GMA,
+	TEGRA_DRIVE_PINGROUP_GMB,
+	TEGRA_DRIVE_PINGROUP_GMC,
+	TEGRA_DRIVE_PINGROUP_GMD,
+	TEGRA_DRIVE_PINGROUP_GME,
+	TEGRA_DRIVE_PINGROUP_GMF,
+	TEGRA_DRIVE_PINGROUP_GMG,
+	TEGRA_DRIVE_PINGROUP_GMH,
+	TEGRA_DRIVE_PINGROUP_OWR,
+	TEGRA_DRIVE_PINGROUP_UAD,
+	TEGRA_DRIVE_PINGROUP_GPV,
+	TEGRA_DRIVE_PINGROUP_DEV3,
+	TEGRA_DRIVE_PINGROUP_CEC,
+	TEGRA_MAX_DRIVE_PINGROUP,
+};
+
+#endif
+

arch/arm/mach-tegra/include/mach/pinmux.h

@@ -2,6 +2,7 @@
  * linux/arch/arm/mach-tegra/include/mach/pinmux.h
  *
  * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010,2011 Nvidia, Inc.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -17,18 +18,13 @@
 #ifndef __MACH_TEGRA_PINMUX_H
 #define __MACH_TEGRA_PINMUX_H
 
-#if defined(CONFIG_ARCH_TEGRA_2x_SOC)
-#include "pinmux-t2.h"
-#else
-#error "Undefined Tegra architecture"
-#endif
-
 enum tegra_mux_func {
 	TEGRA_MUX_RSVD = 0x8000,
 	TEGRA_MUX_RSVD1 = 0x8000,
 	TEGRA_MUX_RSVD2 = 0x8001,
 	TEGRA_MUX_RSVD3 = 0x8002,
 	TEGRA_MUX_RSVD4 = 0x8003,
+	TEGRA_MUX_INVALID = 0x4000,
 	TEGRA_MUX_NONE = -1,
 	TEGRA_MUX_AHB_CLK,
 	TEGRA_MUX_APB_CLK,
@@ -90,6 +86,49 @@ enum tegra_mux_func {
 	TEGRA_MUX_VI,
 	TEGRA_MUX_VI_SENSOR_CLK,
 	TEGRA_MUX_XIO,
+	TEGRA_MUX_BLINK,
+	TEGRA_MUX_CEC,
+	TEGRA_MUX_CLK12,
+	TEGRA_MUX_DAP,
+	TEGRA_MUX_DAPSDMMC2,
+	TEGRA_MUX_DDR,
+	TEGRA_MUX_DEV3,
+	TEGRA_MUX_DTV,
+	TEGRA_MUX_VI_ALT1,
+	TEGRA_MUX_VI_ALT2,
+	TEGRA_MUX_VI_ALT3,
+	TEGRA_MUX_EMC_DLL,
+	TEGRA_MUX_EXTPERIPH1,
+	TEGRA_MUX_EXTPERIPH2,
+	TEGRA_MUX_EXTPERIPH3,
+	TEGRA_MUX_GMI_ALT,
+	TEGRA_MUX_HDA,
+	TEGRA_MUX_HSI,
+	TEGRA_MUX_I2C4,
+	TEGRA_MUX_I2C5,
+	TEGRA_MUX_I2CPWR,
+	TEGRA_MUX_I2S0,
+	TEGRA_MUX_I2S1,
+	TEGRA_MUX_I2S2,
+	TEGRA_MUX_I2S3,
+	TEGRA_MUX_I2S4,
+	TEGRA_MUX_NAND_ALT,
+	TEGRA_MUX_POPSDIO4,
+	TEGRA_MUX_POPSDMMC4,
+	TEGRA_MUX_PWM0,
+	TEGRA_MUX_PWM1,
+	TEGRA_MUX_PWM2,
+	TEGRA_MUX_PWM3,
+	TEGRA_MUX_SATA,
+	TEGRA_MUX_SPI5,
+	TEGRA_MUX_SPI6,
+	TEGRA_MUX_SYSCLK,
+	TEGRA_MUX_VGP1,
+	TEGRA_MUX_VGP2,
+	TEGRA_MUX_VGP3,
+	TEGRA_MUX_VGP4,
+	TEGRA_MUX_VGP5,
+	TEGRA_MUX_VGP6,
 	TEGRA_MUX_SAFE,
 	TEGRA_MAX_MUX,
 };
@@ -105,6 +144,11 @@ enum tegra_tristate {
 	TEGRA_TRI_TRISTATE = 1,
 };
 
+enum tegra_pin_io {
+	TEGRA_PIN_OUTPUT = 0,
+	TEGRA_PIN_INPUT = 1,
+};
+
 enum tegra_vddio {
 	TEGRA_VDDIO_BB = 0,
 	TEGRA_VDDIO_LCD,
@@ -115,10 +159,16 @@ enum tegra_vddio {
 	TEGRA_VDDIO_SYS,
 	TEGRA_VDDIO_AUDIO,
 	TEGRA_VDDIO_SD,
+	TEGRA_VDDIO_CAM,
+	TEGRA_VDDIO_GMI,
+	TEGRA_VDDIO_PEXCTL,
+	TEGRA_VDDIO_SDMMC1,
+	TEGRA_VDDIO_SDMMC3,
+	TEGRA_VDDIO_SDMMC4,
 };
 
 struct tegra_pingroup_config {
-	enum tegra_pingroup	pingroup;
+	int pingroup;
 	enum tegra_mux_func	func;
 	enum tegra_pullupdown	pupd;
 	enum tegra_tristate	tristate;
@@ -187,7 +237,7 @@ enum tegra_schmitt {
 };
 
 struct tegra_drive_pingroup_config {
-	enum tegra_drive_pingroup pingroup;
+	int pingroup;
 	enum tegra_hsm hsm;
 	enum tegra_schmitt schmitt;
 	enum tegra_drive drive;
@@ -208,6 +258,7 @@ struct tegra_pingroup_desc {
 	int funcs[4];
 	int func_safe;
 	int vddio;
+	enum tegra_pin_io io_default;
 	s16 tri_bank;	/* Register bank the tri_reg exists within */
 	s16 mux_bank;	/* Register bank the mux_reg exists within */
 	s16 pupd_bank;	/* Register bank the pupd_reg exists within */
@@ -217,15 +268,23 @@ struct tegra_pingroup_desc {
 	s8 tri_bit; 	/* offset into the TRISTATE_REG_* register bit */
 	s8 mux_bit;	/* offset into the PIN_MUX_CTL_* register bit */
 	s8 pupd_bit;	/* offset into the PULL_UPDOWN_REG_* register bit */
+	s8 lock_bit;	/* offset of the LOCK bit into mux register bit */
+	s8 od_bit;	/* offset of the OD bit into mux register bit */
+	s8 ioreset_bit;	/* offset of the IO_RESET bit into mux register bit */
 };
 
-extern const struct tegra_pingroup_desc tegra_soc_pingroups[];
-extern const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[];
+typedef void (*pinmux_init) (const struct tegra_pingroup_desc **pg,
+	int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
+	int *pgdrive_max);
 
-int tegra_pinmux_set_tristate(enum tegra_pingroup pg,
-	enum tegra_tristate tristate);
-int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg,
-	enum tegra_pullupdown pupd);
+void tegra20_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
+	const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
+
+void tegra30_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
+	const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
+
+int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate);
+int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd);
 
 void tegra_pinmux_config_table(const struct tegra_pingroup_config *config,
 	int len);
@@ -241,4 +300,3 @@ void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *conf
 void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
 	int len, enum tegra_pullupdown pupd);
 #endif
-

arch/arm/mach-tegra/pinmux-t2-tables.c → arch/arm/mach-tegra/pinmux-tegra20-tables.c

 /*
- * linux/arch/arm/mach-tegra/pinmux-t2-tables.c
+ * linux/arch/arm/mach-tegra/pinmux-tegra20-tables.c
  *
- * Common pinmux configurations for Tegra 2 SoCs
+ * Common pinmux configurations for Tegra20 SoCs
  *
  * Copyright (C) 2010 NVIDIA Corporation
  *
@@ -29,6 +29,7 @@
 
 #include <mach/iomap.h>
 #include <mach/pinmux.h>
+#include <mach/pinmux-tegra20.h>
 #include <mach/suspend.h>
 
 #define TRISTATE_REG_A		0x14
@@ -43,7 +44,7 @@
 		.reg = ((r) - PINGROUP_REG_A)			\
 	}
 
-const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
+static const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
 	DRIVE_PINGROUP(AO1,		0x868),
 	DRIVE_PINGROUP(AO2,		0x86c),
 	DRIVE_PINGROUP(AT1,		0x870),
@@ -105,9 +106,13 @@ const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE
 		.pupd_bank = 2,				\
 		.pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A),	\
 		.pupd_bit = pupd_b,				\
+		.lock_bit = -1,					\
+		.od_bit = -1,					\
+		.ioreset_bit = -1,				\
+		.io_default = -1,				\
 	}
 
-const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
+static const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
 	PINGROUP(ATA,   NAND,  IDE,       NAND,      GMI,       RSVD,          IDE,       0x14, 0,  0x80, 24, 0xA0, 0),
 	PINGROUP(ATB,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 1,  0x80, 16, 0xA0, 2),
 	PINGROUP(ATC,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 2,  0x80, 22, 0xA0, 4),
@@ -226,3 +231,14 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
 	PINGROUP(XM2C,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 30),
 	PINGROUP(XM2D,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 28),
 };
+
+void __devinit tegra20_pinmux_init(const struct tegra_pingroup_desc **pg,
+		int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
+		int *pgdrive_max)
+{
+	*pg = tegra_soc_pingroups;
+	*pg_max = TEGRA_MAX_PINGROUP;
+	*pgdrive = tegra_soc_drive_pingroups;
+	*pgdrive_max = TEGRA_MAX_DRIVE_PINGROUP;
+}
+

arch/arm/mach-tegra/tegra2_clocks.c

@@ -174,7 +174,7 @@ static int tegra_periph_clk_enable_refcount[3 * 32];
 #define pmc_readl(reg) \
 	__raw_readl(reg_pmc_base + (reg))
 
-unsigned long clk_measure_input_freq(void)
+static unsigned long clk_measure_input_freq(void)
 {
 	u32 clock_autodetect;
 	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
@@ -278,18 +278,6 @@ static struct clk_ops tegra_clk_m_ops = {
 	.disable	= tegra2_clk_m_disable,
 };
 
-void tegra2_periph_reset_assert(struct clk *c)
-{
-	BUG_ON(!c->ops->reset);
-	c->ops->reset(c, true);
-}
-
-void tegra2_periph_reset_deassert(struct clk *c)
-{
-	BUG_ON(!c->ops->reset);
-	c->ops->reset(c, false);
-}
-
 /* super clock functions */
 /* "super clocks" on tegra have two-stage muxes and a clock skipping
  * super divider.  We will ignore the clock skipping divider, since we
@@ -1132,6 +1120,9 @@ static struct clk_ops tegra_periph_clk_ops = {
 void tegra2_sdmmc_tap_delay(struct clk *c, int delay)
 {
 	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->spinlock, flags);
 
 	delay = clamp(delay, 0, 15);
 	reg = clk_readl(c->reg);
@@ -1139,6 +1130,8 @@ void tegra2_sdmmc_tap_delay(struct clk *c, int delay)
 	reg |= SDMMC_CLK_INT_FB_SEL;
 	reg |= delay << SDMMC_CLK_INT_FB_DLY_SHIFT;
 	clk_writel(reg, c->reg);
+
+	spin_unlock_irqrestore(&c->spinlock, flags);
 }
 
 /* External memory controller clock ops */

arch/arm/mach-tegra/timer.c

@@ -165,20 +165,28 @@ static struct irqaction tegra_timer_irq = {
 static void __init tegra_init_timer(void)
 {
 	struct clk *clk;
-	unsigned long rate = clk_measure_input_freq();
+	unsigned long rate;
 	int ret;
 
 	clk = clk_get_sys("timer", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	if (IS_ERR(clk)) {
+		pr_warn("Unable to get timer clock."
+			" Assuming 12Mhz input clock.\n");
+		rate = 12000000;
+	} else {
+		clk_enable(clk);
+		rate = clk_get_rate(clk);
+	}
 
 	/*
 	 * rtc registers are used by read_persistent_clock, keep the rtc clock
 	 * enabled
 	 */
 	clk = clk_get_sys("rtc-tegra", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	if (IS_ERR(clk))
+		pr_warn("Unable to get rtc-tegra clock\n");
+	else
+		clk_enable(clk);
 
 #ifdef CONFIG_HAVE_ARM_TWD
 	twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600);

arch/arm/plat-omap/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
-obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o

arch/arm/plat-omap/include/plat/am33xx.h

+/*
+ * This file contains the address info for various AM33XX modules.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_AM33XX_H
+#define __ASM_ARCH_AM33XX_H
+
+#define L4_SLOW_AM33XX_BASE	0x48000000
+
+#define AM33XX_SCM_BASE		0x44E10000
+#define AM33XX_CTRL_BASE	AM33XX_SCM_BASE
+#define AM33XX_PRCM_BASE	0x44E00000
+
+#endif /* __ASM_ARCH_AM33XX_H */

arch/arm/plat-omap/include/plat/clock.h

@@ -59,6 +59,8 @@ struct clkops {
 #define RATE_IN_4430		(1 << 5)
 #define RATE_IN_TI816X		(1 << 6)
 #define RATE_IN_4460		(1 << 7)
+#define RATE_IN_AM33XX		(1 << 8)
+#define RATE_IN_TI814X		(1 << 9)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 #define RATE_IN_34XX		(RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
@@ -84,7 +86,7 @@ struct clkops {
 struct clksel_rate {
 	u32			val;
 	u8			div;
-	u8			flags;
+	u16			flags;
 };
 
 /**

arch/arm/plat-omap/include/plat/cpu.h

@@ -69,6 +69,7 @@ unsigned int omap_rev(void);
  * cpu_is_omap343x():	True for OMAP3430
  * cpu_is_omap443x():	True for OMAP4430
  * cpu_is_omap446x():	True for OMAP4460
+ * cpu_is_omap447x():	True for OMAP4470
  */
 #define GET_OMAP_CLASS	(omap_rev() & 0xff)
 
@@ -78,6 +79,22 @@ static inline int is_omap ##class (void)		\
 	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
 }
 
+#define GET_AM_CLASS	((omap_rev() >> 24) & 0xff)
+
+#define IS_AM_CLASS(class, id)				\
+static inline int is_am ##class (void)			\
+{							\
+	return (GET_AM_CLASS == (id)) ? 1 : 0;		\
+}
+
+#define GET_TI_CLASS	((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id)			\
+static inline int is_ti ##class (void)		\
+{							\
+	return (GET_TI_CLASS == (id)) ? 1 : 0;	\
+}
+
 #define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
 
 #define IS_OMAP_SUBCLASS(subclass, id)			\
@@ -92,12 +109,21 @@ static inline int is_ti ##subclass (void)		\
 	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
 }
 
+#define IS_AM_SUBCLASS(subclass, id)			\
+static inline int is_am ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
 IS_OMAP_CLASS(7xx, 0x07)
 IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(33xx, 0x33)
+
+IS_TI_CLASS(81xx, 0x81)
 
 IS_OMAP_SUBCLASS(242x, 0x242)
 IS_OMAP_SUBCLASS(243x, 0x243)
@@ -105,8 +131,11 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 IS_OMAP_SUBCLASS(363x, 0x363)
 IS_OMAP_SUBCLASS(443x, 0x443)
 IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
 
 IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
 
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
@@ -116,10 +145,15 @@ IS_TI_SUBCLASS(816x, 0x816)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_ti81xx()			0
 #define cpu_is_ti816x()			0
+#define cpu_is_ti814x()			0
+#define cpu_is_am33xx()			0
+#define cpu_is_am335x()			0
 #define cpu_is_omap44xx()		0
 #define cpu_is_omap443x()		0
 #define cpu_is_omap446x()		0
+#define cpu_is_omap447x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -322,7 +356,11 @@ IS_OMAP_TYPE(3517, 0x3517)
 # undef cpu_is_omap3530
 # undef cpu_is_omap3505
 # undef cpu_is_omap3517
+# undef cpu_is_ti81xx
 # undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef cpu_is_am33xx
+# undef cpu_is_am335x
 # define cpu_is_omap3430()		is_omap3430()
 # define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
 						(!omap3_has_iva()) &&	\
@@ -339,16 +377,22 @@ IS_OMAP_TYPE(3517, 0x3517)
 						!omap3_has_sgx())
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
+# define cpu_is_ti81xx()		is_ti81xx()
 # define cpu_is_ti816x()		is_ti816x()
+# define cpu_is_ti814x()		is_ti814x()
+# define cpu_is_am33xx()		is_am33xx()
+# define cpu_is_am335x()		is_am335x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
 # undef cpu_is_omap44xx
 # undef cpu_is_omap443x
 # undef cpu_is_omap446x
+# undef cpu_is_omap447x
 # define cpu_is_omap44xx()		is_omap44xx()
 # define cpu_is_omap443x()		is_omap443x()
 # define cpu_is_omap446x()		is_omap446x()
+# define cpu_is_omap447x()		is_omap447x()
 # endif
 
 /* Macros to detect if we have OMAP1 or OMAP2 */
@@ -386,15 +430,27 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define TI8168_REV_ES1_0	TI816X_CLASS
 #define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
 
+#define TI814X_CLASS		0x81400034
+#define TI8148_REV_ES1_0	TI814X_CLASS
+#define TI8148_REV_ES2_0	(TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1	(TI814X_CLASS | (0x2 << 8))
+
+#define AM335X_CLASS		0x33500034
+#define AM335X_REV_ES1_0	AM335X_CLASS
+
 #define OMAP443X_CLASS		0x44300044
 #define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
 #define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
 #define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
 #define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3	(OMAP443X_CLASS | (0x23 << 8))
 
 #define OMAP446X_CLASS		0x44600044
 #define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))
 
+#define OMAP447X_CLASS		0x44700044
+#define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
+
 void omap2_check_revision(void);
 
 /*

arch/arm/plat-omap/include/plat/hardware.h

@@ -286,6 +286,7 @@
 #include <plat/omap24xx.h>
 #include <plat/omap34xx.h>
 #include <plat/omap44xx.h>
-#include <plat/ti816x.h>
+#include <plat/ti81xx.h>
+#include <plat/am33xx.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */

arch/arm/plat-omap/include/plat/io.h

@@ -73,6 +73,9 @@
 #define OMAP4_L3_IO_OFFSET	0xb4000000
 #define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
 
+#define AM33XX_L4_WK_IO_OFFSET	0xb5000000
+#define AM33XX_L4_WK_IO_ADDRESS(pa)	IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
+
 #define OMAP4_L3_PER_IO_OFFSET	0xb1100000
 #define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
 
@@ -153,6 +156,15 @@
 #define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
 
+/*
+ * ----------------------------------------------------------------------------
+ * AM33XX specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+#define L4_WK_AM33XX_PHYS	L4_WK_AM33XX_BASE
+#define L4_WK_AM33XX_VIRT	(L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
+#define L4_WK_AM33XX_SIZE	SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
 /*
  * Need to look at the Size 4M for L4.
  * VPOM3430 was not working for Int controller

arch/arm/plat-omap/include/plat/omap34xx.h

@@ -35,6 +35,8 @@
 #define L4_EMU_34XX_BASE	0x54000000
 #define L3_34XX_BASE		0x68000000
 
+#define L4_WK_AM33XX_BASE	0x44C00000
+
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800
 #define OMAP3430_PRM_BASE	0x48306800

arch/arm/plat-omap/include/plat/serial.h

@@ -51,10 +51,10 @@
 #define OMAP4_UART3_BASE	0x48020000
 #define OMAP4_UART4_BASE	0x4806e000
 
-/* TI816X serial ports */
-#define TI816X_UART1_BASE	0x48020000
-#define TI816X_UART2_BASE	0x48022000
-#define TI816X_UART3_BASE	0x48024000
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE	0x48020000
+#define TI81XX_UART2_BASE	0x48022000
+#define TI81XX_UART3_BASE	0x48024000
 
 /* AM3505/3517 UART4 */
 #define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
@@ -89,9 +89,9 @@
 #define OMAP4UART2		OMAP2UART2
 #define OMAP4UART3		43
 #define OMAP4UART4		44
-#define TI816XUART1		81
-#define TI816XUART2		82
-#define TI816XUART3		83
+#define TI81XXUART1		81
+#define TI81XXUART2		82
+#define TI81XXUART3		83
 #define ZOOM_UART		95		/* Only on zoom2/3 */
 
 /* This is only used by 8250.c for omap1510 */

arch/arm/plat-omap/include/plat/ti816x.h → arch/arm/plat-omap/include/plat/ti81xx.h

 /*
- * This file contains the address data for various TI816X modules.
+ * This file contains the address data for various TI81XX modules.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
  *
@@ -13,15 +13,15 @@
  * GNU General Public License for more details.
  */
 
-#ifndef __ASM_ARCH_TI816X_H
-#define __ASM_ARCH_TI816X_H
+#ifndef __ASM_ARCH_TI81XX_H
+#define __ASM_ARCH_TI81XX_H
 
-#define L4_SLOW_TI816X_BASE	0x48000000
+#define L4_SLOW_TI81XX_BASE	0x48000000
 
-#define TI816X_SCM_BASE		0x48140000
-#define TI816X_CTRL_BASE	TI816X_SCM_BASE
-#define TI816X_PRCM_BASE	0x48180000
+#define TI81XX_SCM_BASE		0x48140000
+#define TI81XX_CTRL_BASE	TI81XX_SCM_BASE
+#define TI81XX_PRCM_BASE	0x48180000
 
-#define TI816X_ARM_INTC_BASE	0x48200000
+#define TI81XX_ARM_INTC_BASE	0x48200000
 
-#endif /* __ASM_ARCH_TI816X_H */
+#endif /* __ASM_ARCH_TI81XX_H */

arch/arm/plat-omap/include/plat/uncompress.h

@@ -99,9 +99,9 @@ static inline void flush(void)
 #define DEBUG_LL_ZOOM(mach)						\
 	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
 
-#define DEBUG_LL_TI816X(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		TI816XUART##p)
+#define DEBUG_LL_TI81XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		TI81XXUART##p)
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -177,7 +177,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_ZOOM(omap_zoom3);
 
 		/* TI8168 base boards using UART3 */
-		DEBUG_LL_TI816X(3, ti8168evm);
+		DEBUG_LL_TI81XX(3, ti8168evm);
 
 	} while (0);
 }