clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core

DE3 documentation regarding presence of rotate core in H6 is a bit
confusing. Register descriptions mention bits for enabling rotate core
clocks and reset, but general overview doesn't list it as feature of H6
display engine, BSP kernel doesn't support it and there is no interrupt
listed for it. Manual poking registers also didn't reveal presence of
rotate core.

Let's assume there isn't any rotate core on H6 present and remove
related clocks. With that done, structures are same as those for H5, so
just reuse H5 structure.

Fixes: 56808da9 ("clk: sunxi-ng: Add support for H6 DE3 clocks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drivers/clk/sunxi-ng/ccu-sun8i-de2.c

@@ -51,24 +51,6 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4,
 static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
 		   CLK_SET_RATE_PARENT);
 
-static struct ccu_common *sun50i_h6_de3_clks[] = {
-	&mixer0_clk.common,
-	&mixer1_clk.common,
-	&wb_clk.common,
-
-	&bus_mixer0_clk.common,
-	&bus_mixer1_clk.common,
-	&bus_wb_clk.common,
-
-	&mixer0_div_clk.common,
-	&mixer1_div_clk.common,
-	&wb_div_clk.common,
-
-	&bus_rot_clk.common,
-	&rot_clk.common,
-	&rot_div_clk.common,
-};
-
 static struct ccu_common *sun8i_a83t_de2_clks[] = {
 	&mixer0_clk.common,
 	&mixer1_clk.common,
@@ -194,26 +176,6 @@ static struct clk_hw_onecell_data sun50i_a64_de2_hw_clks = {
 	.num	= CLK_NUMBER_WITH_ROT,
 };
 
-static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
-	.hws	= {
-		[CLK_MIXER0]		= &mixer0_clk.common.hw,
-		[CLK_MIXER1]		= &mixer1_clk.common.hw,
-		[CLK_WB]		= &wb_clk.common.hw,
-		[CLK_ROT]		= &rot_clk.common.hw,
-
-		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
-		[CLK_BUS_MIXER1]	= &bus_mixer1_clk.common.hw,
-		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
-		[CLK_BUS_ROT]		= &bus_rot_clk.common.hw,
-
-		[CLK_MIXER0_DIV]	= &mixer0_div_clk.common.hw,
-		[CLK_MIXER1_DIV]	= &mixer1_div_clk.common.hw,
-		[CLK_WB_DIV]		= &wb_div_clk.common.hw,
-		[CLK_ROT_DIV]		= &rot_div_clk.common.hw,
-	},
-	.num	= CLK_NUMBER_WITH_ROT,
-};
-
 static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	/*
@@ -237,13 +199,6 @@ static struct ccu_reset_map sun50i_h5_de2_resets[] = {
 	[RST_WB]	= { 0x08, BIT(2) },
 };
 
-static struct ccu_reset_map sun50i_h6_de3_resets[] = {
-	[RST_MIXER0]	= { 0x08, BIT(0) },
-	[RST_MIXER1]	= { 0x08, BIT(1) },
-	[RST_WB]	= { 0x08, BIT(2) },
-	[RST_ROT]	= { 0x08, BIT(3) },
-};
-
 static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
 	.ccu_clks	= sun8i_a83t_de2_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun8i_a83t_de2_clks),
@@ -284,16 +239,6 @@ static const struct sunxi_ccu_desc sun50i_h5_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_h5_de2_resets),
 };
 
-static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = {
-	.ccu_clks	= sun50i_h6_de3_clks,
-	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_de3_clks),
-
-	.hw_clks	= &sun50i_h6_de3_hw_clks,
-
-	.resets		= sun50i_h6_de3_resets,
-	.num_resets	= ARRAY_SIZE(sun50i_h6_de3_resets),
-};
-
 static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
 	.ccu_clks	= sun8i_v3s_de2_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_de2_clks),
@@ -406,7 +351,7 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
 	},
 	{
 		.compatible = "allwinner,sun50i-h6-de3-clk",
-		.data = &sun50i_h6_de3_clk_desc,
+		.data = &sun50i_h5_de2_clk_desc,
 	},
 	{ }
 };