timers: Fixup the Kconfig consolidation fallout

Sigh, I missed to check which architecture Kconfig files actually
include the core Kconfig file. There are a few which did not. So we
broke them.

Instead of adding the includes to those, we are better off to move the
include to init/Kconfig like we did already with irqs and others.

This does not change anything for the architectures using the old
style periodic timer mode. It just solves the build wreckage there.

For those architectures which use the clock events infrastructure it
moves the include of the core Kconfig file to "General setup" which is
a way more logical place than having it at random locations specified
by the architecture specific Kconfigs.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@glx-um.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

arch/arm/Kconfig

@@ -1459,8 +1459,6 @@ endmenu
 
 menu "Kernel Features"
 
-source "kernel/time/Kconfig"
-
 config HAVE_SMP
 	bool
 	help

arch/avr32/Kconfig

@@ -61,8 +61,6 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type and features"
 
-source "kernel/time/Kconfig"
-
 config SUBARCH_AVR32B
 	bool
 config MMU

arch/blackfin/Kconfig

@@ -631,8 +631,6 @@ config GPTMR0_CLOCKSOURCE
 	depends on !TICKSOURCE_GPTMR0
 endmenu
 
-source kernel/time/Kconfig
-
 comment "Misc"
 
 choice

arch/c6x/Kconfig

@@ -132,7 +132,6 @@ source "mm/Kconfig"
 source "kernel/Kconfig.preempt"
 
 source "kernel/Kconfig.hz"
-source "kernel/time/Kconfig"
 
 endmenu
 

arch/h8300/Kconfig.cpu

 menu "Processor type and features"
 
-source "kernel/time/Kconfig"
-
 choice
 	prompt "H8/300 platform"
 	default H8300H_GENERIC

arch/hexagon/Kconfig

@@ -183,7 +183,6 @@ endchoice
 source "mm/Kconfig"
 
 source "kernel/Kconfig.hz"
-source "kernel/time/Kconfig"
 
 config GENERIC_GPIO
 	bool "Generic GPIO support"

arch/m68k/Kconfig

@@ -106,10 +106,6 @@ if COLDFIRE
 source "kernel/Kconfig.preempt"
 endif
 
-if !MMU || COLDFIRE
-source "kernel/time/Kconfig"
-endif
-
 source "mm/Kconfig"
 
 endmenu

arch/microblaze/Kconfig

@@ -74,8 +74,6 @@ source "arch/microblaze/platform/Kconfig.platform"
 
 menu "Processor type and features"
 
-source "kernel/time/Kconfig"
-
 source "kernel/Kconfig.preempt"
 
 source "kernel/Kconfig.hz"

arch/mips/Kconfig

@@ -2205,8 +2205,6 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
-source "kernel/time/Kconfig"
-
 #
 # Timer Interrupt Frequency Configuration
 #

arch/mn10300/Kconfig

@@ -226,7 +226,6 @@ config MN10300_USING_JTAG
 	  single-stepping, which are taken over completely by the JTAG unit.
 
 source "kernel/Kconfig.hz"
-source "kernel/time/Kconfig"
 
 config MN10300_RTC
 	bool "Using MN10300 RTC"

arch/openrisc/Kconfig

@@ -106,7 +106,6 @@ config OPENRISC_HAVE_INST_DIV
 endmenu
 
 
-source "kernel/time/Kconfig"
 source kernel/Kconfig.hz
 source kernel/Kconfig.preempt
 source "mm/Kconfig"

arch/powerpc/Kconfig

@@ -278,7 +278,6 @@ config HIGHMEM
 	bool "High memory support"
 	depends on PPC32
 
-source kernel/time/Kconfig
 source kernel/Kconfig.hz
 source kernel/Kconfig.preempt
 source "fs/Kconfig.binfmt"

arch/s390/Kconfig

@@ -131,8 +131,6 @@ menu "Base setup"
 
 comment "Processor type and features"
 
-source "kernel/time/Kconfig"
-
 config 64BIT
 	def_bool y
 	prompt "64 bit kernel"

arch/score/Kconfig

@@ -66,7 +66,6 @@ config MEMORY_START
 	hex
 	default	0xa0000000
 
-source "kernel/time/Kconfig"
 source "kernel/Kconfig.hz"
 source "kernel/Kconfig.preempt"
 

arch/sh/Kconfig

@@ -577,9 +577,6 @@ config SH_CLK_CPG_LEGACY
 	depends on SH_CLK_CPG
 	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
 		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757
-
-source "kernel/time/Kconfig"
-
 endmenu
 
 menu "CPU Frequency scaling"

arch/sparc/Kconfig

@@ -266,8 +266,6 @@ config HOTPLUG_CPU
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
 
-source "kernel/time/Kconfig"
-
 if SPARC64
 source "drivers/cpufreq/Kconfig"
 

arch/tile/Kconfig

@@ -136,8 +136,6 @@ config NR_CPUS
 	  smaller kernel memory footprint results from using a smaller
 	  value on chips with fewer tiles.
 
-source "kernel/time/Kconfig"
-
 source "kernel/Kconfig.hz"
 
 config KEXEC

arch/um/Kconfig.um

@@ -10,7 +10,6 @@ config STATIC_LINK
 	  2.75G) for UML.
 
 source "mm/Kconfig"
-source "kernel/time/Kconfig"
 
 config LD_SCRIPT_STATIC
 	bool

arch/unicore32/Kconfig

@@ -143,8 +143,6 @@ endmenu
 
 menu "Kernel Features"
 
-source "kernel/time/Kconfig"
-
 source "kernel/Kconfig.preempt"
 
 source "kernel/Kconfig.hz"

arch/x86/Kconfig

@@ -241,8 +241,6 @@ config ZONE_DMA
 
 	  If unsure, say Y.
 
-source "kernel/time/Kconfig"
-
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---

init/Kconfig

@@ -387,6 +387,7 @@ config AUDIT_LOGINUID_IMMUTABLE
 	  but may not be backwards compatible with older init systems.
 
 source "kernel/irq/Kconfig"
+source "kernel/time/Kconfig"
 
 menu "RCU Subsystem"
 

kernel/time/Kconfig

@@ -2,38 +2,6 @@
 # Timer subsystem related configuration options
 #
 
-# Core internal switch. Selected by NO_HZ / HIGH_RES_TIMERS. This is
-# only related to the tick functionality. Oneshot clockevent devices
-# are supported independ of this.
-config TICK_ONESHOT
-	bool
-
-config NO_HZ
-	bool "Tickless System (Dynamic Ticks)"
-	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
-	select TICK_ONESHOT
-	help
-	  This option enables a tickless system: timer interrupts will
-	  only trigger on an as-needed basis both when the system is
-	  busy and when the system is idle.
-
-config HIGH_RES_TIMERS
-	bool "High Resolution Timer Support"
-	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
-	select TICK_ONESHOT
-	help
-	  This option enables high resolution timer support. If your
-	  hardware is not capable then this option only increases
-	  the size of the kernel image.
-
-config GENERIC_CLOCKEVENTS_BUILD
-	bool
-	default y
-	depends on GENERIC_CLOCKEVENTS
-
-config GENERIC_CLOCKEVENTS_MIN_ADJUST
-	bool
-
 # Options selectable by arch Kconfig
 
 # Watchdog function for clocksources to detect instabilities
@@ -60,11 +28,52 @@ config ARCH_USES_GETTIMEOFFSET
 config GENERIC_CLOCKEVENTS
 	bool
 
+# Migration helper. Builds, but does not invoke
+config GENERIC_CLOCKEVENTS_BUILD
+	bool
+	default y
+	depends on GENERIC_CLOCKEVENTS
+
 # Clockevents broadcasting infrastructure
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 	depends on GENERIC_CLOCKEVENTS
 
+# Automatically adjust the min. reprogramming time for
+# clock event device
+config GENERIC_CLOCKEVENTS_MIN_ADJUST
+	bool
+
 # Generic update of CMOS clock
 config GENERIC_CMOS_UPDATE
 	bool
+
+if GENERIC_CLOCKEVENTS
+menu "Timers subsystem"
+
+# Core internal switch. Selected by NO_HZ / HIGH_RES_TIMERS. This is
+# only related to the tick functionality. Oneshot clockevent devices
+# are supported independ of this.
+config TICK_ONESHOT
+	bool
+
+config NO_HZ
+	bool "Tickless System (Dynamic Ticks)"
+	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	help
+	  This option enables a tickless system: timer interrupts will
+	  only trigger on an as-needed basis both when the system is
+	  busy and when the system is idle.
+
+config HIGH_RES_TIMERS
+	bool "High Resolution Timer Support"
+	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	help
+	  This option enables high resolution timer support. If your
+	  hardware is not capable then this option only increases
+	  the size of the kernel image.
+
+endmenu
+endif