ASoC: tlv320aic32x4: Use correct shift definition for DATALEN bits

Setting the DATALEN bit field requires shifting our value by 4. Setting
the OSR value of the PLL divider also requires a shift by 4. Currently
the code abuses this fact and uses the shift for the divider register to
set the data-length register. Fix this here by using the definition meant
for this register.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/tlv320aic32x4.c

@@ -738,15 +738,20 @@ static int aic32x4_hw_params(struct snd_pcm_substream *substream,
 	data = data & ~(3 << 4);
 	switch (params_width(params)) {
 	case 16:
+		data |= (AIC32X4_WORD_LEN_16BITS <<
+			 AIC32X4_IFACE1_DATALEN_SHIFT);
 		break;
 	case 20:
-		data |= (AIC32X4_WORD_LEN_20BITS << AIC32X4_DOSRMSB_SHIFT);
+		data |= (AIC32X4_WORD_LEN_20BITS <<
+			 AIC32X4_IFACE1_DATALEN_SHIFT);
 		break;
 	case 24:
-		data |= (AIC32X4_WORD_LEN_24BITS << AIC32X4_DOSRMSB_SHIFT);
+		data |= (AIC32X4_WORD_LEN_24BITS <<
+			 AIC32X4_IFACE1_DATALEN_SHIFT);
 		break;
 	case 32:
-		data |= (AIC32X4_WORD_LEN_32BITS << AIC32X4_DOSRMSB_SHIFT);
+		data |= (AIC32X4_WORD_LEN_32BITS <<
+			 AIC32X4_IFACE1_DATALEN_SHIFT);
 		break;
 	}
 	snd_soc_write(codec, AIC32X4_IFACE1, data);