ARM: shmobile: kzm9g-reference: Remove board C code and DT file

Now that the sh73a0 generic multiplatform case has the same feature set
as the kzm9g DT reference board code, we get rid of the latter.
DT reference code in the future shall make use of the sh73a0
multiplatform support code with the generic SoC machine vector.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -57,8 +57,6 @@ Boards:
     compatible = "renesas,kzm9d", "renesas,emev2"
   - Kyoto Microcomputer Co. KZM-A9-GT
     compatible = "renesas,kzm9g", "renesas,sh73a0"
-  - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation
-    compatible = "renesas,kzm9g-reference", "renesas,sh73a0"
   - Lager (RTP0RC7790SEB00010S)
     compatible = "renesas,lager", "renesas,r8a7790"
   - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd)

arch/arm/boot/dts/Makefile

@@ -471,8 +471,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
 	r8a7778-bockw-reference.dtb \
 	r8a7779-marzen.dtb \
 	sh7372-mackerel.dtb \
-	sh73a0-kzm9g.dtb \
-	sh73a0-kzm9g-reference.dtb
+	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \

arch/arm/boot/dts/sh73a0-kzm9g-reference.dts

-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on sh73a0-kzm9g.dts
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
-
-	aliases {
-		serial4 = &scifa4;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd_dvfs>;
-			operating-points = <
-				/* kHz  uV */
-				1196000 1315000
-				 598000 1175000
-				 398667 1065000
-			>;
-			voltage-tolerance = <1>; /* 1% */
-		};
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
-		stdout-path = &scifa4;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vmmc_sdhi0: regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vmmc_sdhi2: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lan9220@10000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x10000000 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		smsc,irq-push-pull;
-		smsc,save-mac-address;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-			label = "LED1";
-		};
-		led2 {
-			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
-			label = "LED2";
-		};
-		led3 {
-			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
-			label = "LED3";
-		};
-		led4 {
-			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
-			label = "LED4";
-		};
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		back-key {
-			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW3";
-		};
-
-		right-key {
-			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RIGHT>;
-			label = "SW2-R";
-		};
-
-		left-key {
-			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LEFT>;
-			label = "SW2-L";
-		};
-
-		enter-key {
-			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_ENTER>;
-			label = "SW2-P";
-		};
-
-		up-key {
-			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			label = "SW2-U";
-		};
-
-		down-key {
-			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			label = "SW2-D";
-		};
-
-		home-key {
-			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW1";
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "left_j";
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-		};
-		simple-audio-card,codec {
-			sound-dai = <&ak4648>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <11289600>;
-		};
-	};
-};
-
-&cmt1 {
-	status = "okay";
-};
-
-&extal2_clk {
-	clock-frequency = <48000000>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	compass@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-		interrupt-parent = <&irqpin3>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-	ak4648: codec@12 {
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-		#sound-dai-cells = <0>;
-	};
-
-	accelerometer@1d {
-		compatible = "adi,adxl34x";
-		reg = <0x1d>;
-		interrupt-parent = <&irqpin3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
-			     <3 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	rtc@32 {
-		compatible = "ricoh,r2025sd";
-		reg = <0x32>;
-	};
-
-	as3711@40 {
-		compatible = "ams,as3711";
-		reg = <0x40>;
-
-		regulators {
-			vdd_dvfs: sd1 {
-				regulator-name = "1.315V CPU";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd2 {
-				regulator-name = "1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd4 {
-				regulator-name = "1.215V";
-				regulator-min-microvolt = <1215000>;
-				regulator-max-microvolt = <1235000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo2 {
-				regulator-name = "2.8V CPU";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo3 {
-				regulator-name = "3.0V CPU";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo4 {
-				regulator-name = "2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo5 {
-				regulator-name = "2.8V #2";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo7 {
-				regulator-name = "1.15V CPU";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo8 {
-				regulator-name = "1.15V CPU #2";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	touchscreen@55 {
-		compatible = "sitronix,st1232";
-		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	pcf8575: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		interrupt-parent = <&irqpin2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&mmcif {
-	pinctrl-0 = <&mmcif_pins>;
-	pinctrl-names = "default";
-
-	bus-width = <8>;
-	vmmc-supply = <&reg_1p8v>;
-	status = "okay";
-};
-
-&pfc {
-	i2c3_pins: i2c3 {
-		renesas,groups = "i2c3_1";
-		renesas,function = "i2c3";
-	};
-
-	mmcif_pins: mmc {
-		mux {
-			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
-			renesas,function = "mmc0";
-		};
-		cfg {
-			renesas,groups = "mmc0_data8_0";
-			renesas,pins = "PORT279";
-			bias-pull-up;
-		};
-	};
-
-	scifa4_pins: serial4 {
-		renesas,groups = "scifa4_data", "scifa4_ctrl";
-		renesas,function = "scifa4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
-				 "fsia_data_in", "fsia_data_out";
-		renesas,function = "fsia";
-	};
-};
-
-&scifa4 {
-	pinctrl-0 = <&scifa4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi0>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi2>;
-	bus-width = <4>;
-	broken-cd;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};

arch/arm/mach-shmobile/Kconfig

@@ -214,20 +214,6 @@ config MACH_KZM9G
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select USE_OF
 
-config MACH_KZM9G_REFERENCE
-	bool "KZM-A9-GT board - Reference Device Tree Implementation"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select USE_OF
-	---help---
-	   Use reference implementation of KZM-A9-GT board support
-	   which makes as greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT

arch/arm/mach-shmobile/Makefile

@@ -66,7 +66,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o intc-sh73a0.o
-obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
 endif
 
 # Framework support

arch/arm/mach-shmobile/Makefile.boot

@@ -6,7 +6,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
-loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 

arch/arm/mach-shmobile/board-kzm9g-reference.c

-/*
- * KZM-A9-GT board support - Reference Device Tree Implementation
- *
- * Copyright (C) 2012	Horms Solutions Ltd.
- *
- * Based on board-kzm9g.c
- * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/of_platform.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "sh73a0.h"
-
-static void __init kzm_init(void)
-{
-	sh73a0_add_standard_devices_dt();
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
-	"renesas,kzm9g-reference",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= shmobile_init_delay,
-	.init_machine	= kzm_init,
-	.init_late	= shmobile_init_late,
-	.restart	= kzm9g_restart,
-	.dt_compat	= kzm9g_boards_compat_dt,
-MACHINE_END

arch/arm/mach-shmobile/include/mach/zboot.h

@@ -12,7 +12,7 @@
 #ifdef CONFIG_MACH_MACKEREL
 #define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
-#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
+#elif defined(CONFIG_MACH_KZM9G)
 #define MEMORY_START	0x43000000
 #include "mach/head-kzm9g.txt"
 #else