Commit 8b092be9 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Linus Walleij

gpio: rcar: Remove obsolete platform data support

Since commit 4baadb9e ("ARM: shmobile: r8a7778: remove obsolete
setup code"), Renesas R-Car SoCs are only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to use platform data
anymore, hence remove platform data configuration.

Make gpio_rcar_priv.has_both_edge_trigger a boolean for consistency with
gpio_rcar_info.has_both_edge_trigger.
Move gpio_rcar_priv.irq_parent down while we're at it, to prevent gaps
on 64-bit.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 0d1bb2b3
......@@ -25,7 +25,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spinlock.h>
......@@ -34,12 +33,12 @@
struct gpio_rcar_priv {
void __iomem *base;
spinlock_t lock;
struct gpio_rcar_config config;
struct platform_device *pdev;
struct gpio_chip gpio_chip;
struct irq_chip irq_chip;
unsigned int irq_parent;
struct clk *clk;
unsigned int irq_parent;
bool has_both_edge_trigger;
};
#define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */
......@@ -121,7 +120,7 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
/* Select one edge or both edges in BOTHEDGE */
if (p->config.has_both_edge_trigger)
if (p->has_both_edge_trigger)
gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
/* Select "Interrupt Input Mode" in IOINTSEL */
......@@ -161,7 +160,7 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
false);
break;
case IRQ_TYPE_EDGE_BOTH:
if (!p->config.has_both_edge_trigger)
if (!p->has_both_edge_trigger)
return -EINVAL;
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
true);
......@@ -355,18 +354,13 @@ static const struct of_device_id gpio_rcar_of_table[] = {
MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
static int gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
{
struct gpio_rcar_config *pdata = dev_get_platdata(&p->pdev->dev);
struct device_node *np = p->pdev->dev.of_node;
struct of_phandle_args args;
int ret;
if (pdata) {
p->config = *pdata;
} else if (IS_ENABLED(CONFIG_OF) && np) {
const struct of_device_id *match;
const struct gpio_rcar_info *info;
struct of_phandle_args args;
int ret;
match = of_match_node(gpio_rcar_of_table, np);
if (!match)
......@@ -374,20 +368,15 @@ static int gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
info = match->data;
ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0,
&args);
p->config.number_of_pins = ret == 0 ? args.args[2]
: RCAR_MAX_GPIO_PER_BANK;
p->config.gpio_base = -1;
p->config.has_both_edge_trigger = info->has_both_edge_trigger;
}
ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
*npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
p->has_both_edge_trigger = info->has_both_edge_trigger;
if (p->config.number_of_pins == 0 ||
p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) {
if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) {
dev_warn(&p->pdev->dev,
"Invalid number of gpio lines %u, using %u\n",
p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK);
p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK;
"Invalid number of gpio lines %u, using %u\n", *npins,
RCAR_MAX_GPIO_PER_BANK);
*npins = RCAR_MAX_GPIO_PER_BANK;
}
return 0;
......@@ -401,6 +390,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
struct irq_chip *irq_chip;
struct device *dev = &pdev->dev;
const char *name = dev_name(dev);
unsigned int npins;
int ret;
p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
......@@ -410,8 +400,8 @@ static int gpio_rcar_probe(struct platform_device *pdev)
p->pdev = pdev;
spin_lock_init(&p->lock);
/* Get device configuration from DT node or platform data. */
ret = gpio_rcar_parse_pdata(p);
/* Get device configuration from DT node */
ret = gpio_rcar_parse_dt(p, &npins);
if (ret < 0)
return ret;
......@@ -451,8 +441,8 @@ static int gpio_rcar_probe(struct platform_device *pdev)
gpio_chip->label = name;
gpio_chip->parent = dev;
gpio_chip->owner = THIS_MODULE;
gpio_chip->base = p->config.gpio_base;
gpio_chip->ngpio = p->config.number_of_pins;
gpio_chip->base = -1;
gpio_chip->ngpio = npins;
irq_chip = &p->irq_chip;
irq_chip->name = name;
......@@ -468,8 +458,8 @@ static int gpio_rcar_probe(struct platform_device *pdev)
goto err0;
}
ret = gpiochip_irqchip_add(gpio_chip, irq_chip, p->config.irq_base,
handle_level_irq, IRQ_TYPE_NONE);
ret = gpiochip_irqchip_add(gpio_chip, irq_chip, 0, handle_level_irq,
IRQ_TYPE_NONE);
if (ret) {
dev_err(dev, "cannot add irqchip\n");
goto err1;
......@@ -483,22 +473,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
goto err1;
}
dev_info(dev, "driving %d GPIOs\n", p->config.number_of_pins);
/* warn in case of mismatch if irq base is specified */
if (p->config.irq_base) {
ret = irq_find_mapping(gpio_chip->irqdomain, 0);
if (p->config.irq_base != ret)
dev_warn(dev, "irq base mismatch (%u/%u)\n",
p->config.irq_base, ret);
}
if (p->config.pctl_name) {
ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
gpio_chip->base, gpio_chip->ngpio);
if (ret < 0)
dev_warn(dev, "failed to add pin range\n");
}
dev_info(dev, "driving %d GPIOs\n", npins);
return 0;
......
/*
* Renesas R-Car GPIO Support
*
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __GPIO_RCAR_H__
#define __GPIO_RCAR_H__
struct gpio_rcar_config {
int gpio_base;
unsigned int irq_base;
unsigned int number_of_pins;
const char *pctl_name;
unsigned has_both_edge_trigger:1;
};
#define RCAR_GP_PIN(bank, pin) (((bank) * 32) + (pin))
#endif /* __GPIO_RCAR_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment