Merge tag 'iio-for-5.5c' of...

Merge tag 'iio-for-5.5c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of IIO new device support cleanups and fixes for the 5.5 cycle.

New device support
* ad5446
  - Support the ad5600 DAC (id only needed).
* ad7292 ADC DAC etc
  - New driver plus dt-bindings.
* veml6030 ambient light sensor
  - New driver plus dt-bindings and sysfs docs.

Features
* mpu6050
  - Explicit VDD control.
* stm32-adc
  - Allow limiting of max clock frequency from devicetree to ensure it's
    suitable for external circuitry.

yaml binding conversions
* ltc1660
* mcp3911

Fixes
* adis16480
  - Fix wrong scale factors.
  - Fix debugfs reg access by providing the callback.
* cros_ec_baro
  - Fixing missing mask entry to make available sample frequencies visible
    in sysfs.
* st_lsm6dsx
  - Explicitly handle different ODR table sizes.
  - Handle restrictions between slave ODR and accel ODR when
    both are enabled.
  - Allow ODR to be expressed more accurately by using miliHz.
* tools
  - Fix an issue with parallel builds.

Cleanups and warning fixes
* adis16136, adis16400, adis16460, adis-lib
  - Change some checks on return values to be for 0 rather than strictly
    negative. Avoids some fiddly issues with the compiler concluding some
    variables are initialized due to a mixture of error checks.
  - Assign values only on success of 'read' operations - avoiding any
    chance the compiler will falsly suggest they might be used uninitialized.
  - Whitespace and simlar cleanups.
* aspeed adc
  - devm_platfom_ioremap_resource to reduce boilerplate.
* bcm-iproc-adc
  - Stray semicolon removal.
* cc10001
  - devm_platfom_ioremap_resource to reduce boilerplate.
* dln2-adc
  - Reorganise the buffered mode setup and tear down. Part of moving towards
    being able to refactor this area of the IIO core.
* hdc100x
  - Reorganise the buffered mode setup and tear down.
* ingenic-adc
  - devm_platfom_ioremap_resource to reduce boilerplate.
* lpc18xx-adc
  - devm_platfom_ioremap_resource to reduce boilerplate.
* lpc18xx-dac
  - devm_platfom_ioremap_resource to reduce boilerplate.
* mt6577
  - devm_platfom_ioremap_resource to reduce boilerplate.
* npcm
  - devm_platfom_ioremap_resource to reduce boilerplate.
* rcar-gyroadc
  - devm_platfom_ioremap_resource to reduce boilerplate.
* spear-adc
  - devm_platfom_ioremap_resource to reduce boilerplate.
* vf610-adc
  - devm_platfom_ioremap_resource to reduce boilerplate.
* vf610-dac
  - devm_platfom_ioremap_resource to reduce boilerplate.

* tag 'iio-for-5.5c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (43 commits)
  iio: adis16480: Add debugfs_reg_access entry
  iio: adis16480: Fix scales factors
  tools: iio: Correctly add make dependency for iio_utils
  iio: adc: Add driver support for AD7292
  dt-bindings: iio: adc: Add dt-schema for AD7292
  dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  iio: imu: mpu6050: Add support for vdd-supply regulator
  dt-bindings: iio: imu: mpu6050: add vdd-supply
  iio: cros_ec_baro: set info_mask_shared_by_all_available field
  iio: dac: ad5446: Add support for new AD5600 DAC
  dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  iio: documentation: light: Add veml6030 sysfs documentation
  dt-bindings: iio: light: add veml6030 ALS bindings
  iio: light: add driver for veml6030 ambient light sensor
  iio: imu: st_lsm6dsx: express odr in mHZ
  iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw
  iio: imu: st_lsm6dsx: explicitly define odr table size
  iio: adc: stm32: allow to tune analog clock
  dt-bindings: iio: stm32-adc: add max clock rate property
  iio: dac: vf610: Use devm_platform_ioremap_resource
  ...

Documentation/ABI/testing/sysfs-bus-iio

@@ -753,6 +753,8 @@ What:		/sys/.../events/in_illuminance0_thresh_falling_value
 what:		/sys/.../events/in_illuminance0_thresh_rising_value
 what:		/sys/.../events/in_proximity0_thresh_falling_value
 what:		/sys/.../events/in_proximity0_thresh_rising_value
+What:		/sys/.../events/in_illuminance_thresh_rising_value
+What:		/sys/.../events/in_illuminance_thresh_falling_value
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -972,6 +974,7 @@ What:		/sys/.../events/in_activity_jogging_thresh_rising_period
 What:		/sys/.../events/in_activity_jogging_thresh_falling_period
 What:		/sys/.../events/in_activity_running_thresh_rising_period
 What:		/sys/.../events/in_activity_running_thresh_falling_period
+What:		/sys/.../events/in_illuminance_thresh_either_period
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1715,3 +1718,11 @@ Description:
 		Mass concentration reading of particulate matter in ug / m3.
 		pmX consists of particles with aerodynamic diameter less or
 		equal to X micrometers.
+
+What:		/sys/bus/iio/devices/iio:deviceX/events/in_illuminance_period_available
+Date:		November 2019
+KernelVersion:	5.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of valid periods (in seconds) for which the light intensity
+		must be above the threshold level before interrupt is asserted.

Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7292 10-Bit Monitor and Control System
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt1@gmail.com>
+
+description: |
+  Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs,
+  Temperature Sensor, and GPIOs
+
+  Specifications about the part can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7292
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC and DAC reference voltage.
+
+  spi-cpha: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+patternProperties:
+  "^channel@[0-7]$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+      See Documentation/devicetree/bindings/iio/adc/adc.txt.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels numbered from 0 to 7.
+        items:
+          maximum: 7
+
+      diff-channels:
+        description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+        maxItems: 1
+
+    required:
+      - reg
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7292: adc@0 {
+        compatible = "adi,ad7292";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+        vref-supply = <&adc_vref>;
+        spi-cpha;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          diff-channels = <0 1>;
+        };
+        channel@2 {
+          reg = <2>;
+        };
+        channel@3 {
+          reg = <3>;
+        };
+        channel@4 {
+          reg = <4>;
+        };
+        channel@5 {
+          reg = <5>;
+        };
+        channel@6 {
+          reg = <6>;
+        };
+        channel@7 {
+          reg = <7>;
+        };
+      };
+    };

Documentation/devicetree/bindings/iio/adc/mcp3911.txt

-* Microchip MCP3911 Dual channel analog front end (ADC)
-
-Required properties:
- - compatible: Should be "microchip,mcp3911"
- - reg: SPI chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-	 Documentation/devicetree/bindings/spi/spi-bus.txt.
-	 Max frequency for this chip is 20MHz.
-
-Optional properties:
- - clocks: Phandle and clock identifier for sampling clock
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the ADC
- - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
-	same SPI bus. Valid values are 0-3. Defaults to 0.
- - vref-supply: Phandle to the external reference voltage supply.
-
-Example:
-adc@0 {
-	compatible = "microchip,mcp3911";
-	reg = <0>;
-	interrupt-parent = <&gpio5>;
-	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-	spi-max-frequency = <20000000>;
-	microchip,device-addr = <0>;
-	vref-supply = <&vref_reg>;
-	clocks = <&xtal>;
-};

Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml

+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip MCP3911 Dual channel analog front end (ADC)
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+  - Kent Gustavsson <nedo80@gmail.com>
+
+description: |
+  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
+  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3911
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  clocks:
+    description: |
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  microchip,device-addr:
+    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2, 3]
+      - default: 0
+
+  vref-supply:
+    description: |
+      Phandle to the external reference voltage supply.
+      If not specified, the internal voltage reference (1.2V) will be used.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "microchip,mcp3911";
+        reg = <0>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <15 2>;
+        spi-max-frequency = <20000000>;
+        microchip,device-addr = <0>;
+        vref-supply = <&vref_reg>;
+        clocks = <&xtal>;
+      };
+    };

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt

@@ -53,6 +53,8 @@ Optional properties:
   analog input switches on stm32mp1.
 - st,syscfg: Phandle to system configuration controller. It can be used to
   control the analog circuitry on stm32mp1.
+- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog
+  circuitry.
 
 Contents of a stm32 adc child node:
 -----------------------------------

Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml

+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/bindings/iio/dac/lltc,ltc1660.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+
+description: |
+  Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit DAC.
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc1660
+      - lltc,ltc1665
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: Phandle to the external reference voltage supply.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+  
+      dac@0 {
+        compatible = "lltc,ltc1660";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vref-supply = <&vref_reg>;
+      };
+    };

Documentation/devicetree/bindings/iio/dac/ltc1660.txt

-* Linear Technology Micropower octal 8-Bit and 10-Bit DACs
-
-Required properties:
- - compatible: Must be one of the following:
-		"lltc,ltc1660"
-		"lltc,ltc1665"
- - reg: SPI chip select number for the device
- - vref-supply: Phandle to the voltage reference supply
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-	 Documentation/devicetree/bindings/spi/spi-bus.txt.
-	 Max frequency for this chip is 5 MHz.
-
-Example:
-dac@0 {
-	compatible = "lltc,ltc1660";
-	reg = <0>;
-	spi-max-frequency = <5000000>;
-	vref-supply = <&vref_reg>;
-};

Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt

@@ -21,6 +21,7 @@ Required properties:
   bindings.
 
 Optional properties:
+ - vdd-supply: regulator phandle for VDD supply
  - vddio-supply: regulator phandle for VDDIO supply
  - mount-matrix: an optional 3x3 mounting rotation matrix
  - i2c-gate node.  These devices also support an auxiliary i2c bus.  This is

Documentation/devicetree/bindings/iio/light/veml6030.yaml

+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/veml6030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VEML6030 Ambient Light Sensor (ALS)
+
+maintainers:
+  - Rishi Gupta <gupt21@gmail.com>
+
+description: |
+  Bindings for the ambient light sensor veml6030 from Vishay
+  Semiconductors over an i2c interface.
+
+  Irrespective of whether interrupt is used or not, application
+  can get the ALS and White channel reading from IIO raw interface.
+
+  If the interrupts are used, application will receive an IIO event
+  whenever configured threshold is crossed.
+
+  Specifications about the sensor can be found at:
+    https://www.vishay.com/docs/84366/veml6030.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,veml6030
+
+  reg:
+    description:
+      I2C address of the device.
+    enum:
+      - 0x10 # ADDR pin pulled down
+      - 0x48 # ADDR pin pulled up
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
+      Refer to interrupt-controller/interrupts.txt for generic
+      interrupt client node bindings.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@10 {
+                compatible = "vishay,veml6030";
+                reg = <0x10>;
+                interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...

MAINTAINERS

@@ -901,6 +901,14 @@ S:	Supported
 F:	drivers/iio/adc/ad7124.c
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
 
+ANALOG DEVICES INC AD7292 DRIVER
+M:	Marcelo Schmitt <marcelo.schmitt1@gmail.com>
+L:	linux-iio@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/adc/ad7292.c
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+
 ANALOG DEVICES INC AD7606 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 M:	Beniamin Bia <beniamin.bia@analog.com>
@@ -9622,7 +9630,7 @@ LTC1660 DAC DRIVER
 M:	Marcus Folkesson <marcus.folkesson@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/iio/dac/ltc1660.txt
+F:	Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
 F:	drivers/iio/dac/ltc1660.c
 
 LTC2983 IIO TEMPERATURE DRIVER
@@ -10738,7 +10746,7 @@ M:	Kent Gustavsson <kent@minoris.se>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 F:	drivers/iio/adc/mcp3911.c
-F:	Documentation/devicetree/bindings/iio/adc/mcp3911.txt
+F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
 
 MICROCHIP NAND DRIVER
 M:	Tudor Ambarus <tudor.ambarus@microchip.com>

drivers/iio/adc/Kconfig

@@ -55,6 +55,16 @@ config AD7291
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7291.
 
+config AD7292
+	tristate "Analog Devices AD7292 ADC driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices AD7292
+	  8 Channel ADC with temperature sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7292.
+
 config AD7298
 	tristate "Analog Devices AD7298 ADC driver"
 	depends on SPI

drivers/iio/adc/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7124) += ad7124.o
 obj-$(CONFIG_AD7266) += ad7266.o
 obj-$(CONFIG_AD7291) += ad7291.o
+obj-$(CONFIG_AD7292) += ad7292.o
 obj-$(CONFIG_AD7298) += ad7298.o
 obj-$(CONFIG_AD7923) += ad7923.o
 obj-$(CONFIG_AD7476) += ad7476.o

drivers/iio/adc/ad7292.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices AD7292 SPI ADC driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+
+#define ADI_VENDOR_ID 0x0018
+
+/* AD7292 registers definition */
+#define AD7292_REG_VENDOR_ID		0x00
+#define AD7292_REG_CONF_BANK		0x05
+#define AD7292_REG_CONV_COMM		0x0E
+#define AD7292_REG_ADC_CH(x)		(0x10 + (x))
+
+/* AD7292 configuration bank subregisters definition */
+#define AD7292_BANK_REG_VIN_RNG0	0x10
+#define AD7292_BANK_REG_VIN_RNG1	0x11
+#define AD7292_BANK_REG_SAMP_MODE	0x12
+
+#define AD7292_RD_FLAG_MSK(x)		(BIT(7) | ((x) & 0x3F))
+
+/* AD7292_REG_ADC_CONVERSION */
+#define AD7292_ADC_DATA_MASK		GENMASK(15, 6)
+#define AD7292_ADC_DATA(x)		FIELD_GET(AD7292_ADC_DATA_MASK, x)
+
+/* AD7292_CHANNEL_SAMPLING_MODE */
+#define AD7292_CH_SAMP_MODE(reg, ch)	(((reg) >> 8) & BIT(ch))
+
+/* AD7292_CHANNEL_VIN_RANGE */
+#define AD7292_CH_VIN_RANGE(reg, ch)	((reg) & BIT(ch))
+
+#define AD7292_VOLTAGE_CHAN(_chan)					\
+{									\
+	.type = IIO_VOLTAGE,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
+			      BIT(IIO_CHAN_INFO_SCALE),			\
+	.indexed = 1,							\
+	.channel = _chan,						\
+}
+
+static const struct iio_chan_spec ad7292_channels[] = {
+	AD7292_VOLTAGE_CHAN(0),
+	AD7292_VOLTAGE_CHAN(1),
+	AD7292_VOLTAGE_CHAN(2),
+	AD7292_VOLTAGE_CHAN(3),
+	AD7292_VOLTAGE_CHAN(4),
+	AD7292_VOLTAGE_CHAN(5),
+	AD7292_VOLTAGE_CHAN(6),
+	AD7292_VOLTAGE_CHAN(7)
+};
+
+static const struct iio_chan_spec ad7292_channels_diff[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.indexed = 1,
+		.differential = 1,
+		.channel = 0,
+		.channel2 = 1,
+	},
+	AD7292_VOLTAGE_CHAN(2),
+	AD7292_VOLTAGE_CHAN(3),
+	AD7292_VOLTAGE_CHAN(4),
+	AD7292_VOLTAGE_CHAN(5),
+	AD7292_VOLTAGE_CHAN(6),
+	AD7292_VOLTAGE_CHAN(7)
+};
+
+struct ad7292_state {
+	struct spi_device *spi;
+	struct regulator *reg;
+	unsigned short vref_mv;
+
+	__be16 d16 ____cacheline_aligned;
+	u8 d8[2];
+};
+
+static int ad7292_spi_reg_read(struct ad7292_state *st, unsigned int addr)
+{
+	int ret;
+
+	st->d8[0] = AD7292_RD_FLAG_MSK(addr);
+
+	ret = spi_write_then_read(st->spi, st->d8, 1, &st->d16, 2);
+	if (ret < 0)
+		return ret;
+
+	return be16_to_cpu(st->d16);
+}
+
+static int ad7292_spi_subreg_read(struct ad7292_state *st, unsigned int addr,
+				  unsigned int sub_addr, unsigned int len)
+{
+	unsigned int shift = 16 - (8 * len);
+	int ret;
+
+	st->d8[0] = AD7292_RD_FLAG_MSK(addr);
+	st->d8[1] = sub_addr;
+
+	ret = spi_write_then_read(st->spi, st->d8, 2, &st->d16, len);
+	if (ret < 0)
+		return ret;
+
+	return (be16_to_cpu(st->d16) >> shift);
+}
+
+static int ad7292_single_conversion(struct ad7292_state *st,
+				    unsigned int chan_addr)
+{
+	int ret;
+
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = &st->d8,
+			.len = 4,
+			.delay_usecs = 6,
+		}, {
+			.rx_buf = &st->d16,
+			.len = 2,
+		},
+	};
+
+	st->d8[0] = chan_addr;
+	st->d8[1] = AD7292_RD_FLAG_MSK(AD7292_REG_CONV_COMM);
+
+	ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
+
+	if (ret < 0)
+		return ret;
+
+	return be16_to_cpu(st->d16);
+}
+
+static int ad7292_vin_range_multiplier(struct ad7292_state *st, int channel)
+{
+	int samp_mode, range0, range1, factor = 1;
+
+	/*
+	 * Every AD7292 ADC channel may have its input range adjusted according
+	 * to the settings at the ADC sampling mode and VIN range subregisters.
+	 * For a given channel, the minimum input range is equal to Vref, and it
+	 * may be increased by a multiplier factor of 2 or 4 according to the
+	 * following rule:
+	 * If channel is being sampled with respect to AGND:
+	 *	factor = 4 if VIN range0 and VIN range1 equal 0
+	 *	factor = 2 if only one of VIN ranges equal 1
+	 *	factor = 1 if both VIN range0 and VIN range1 equal 1
+	 * If channel is being sampled with respect to AVDD:
+	 *	factor = 4 if VIN range0 and VIN range1 equal 0
+	 *	Behavior is undefined if any of VIN range doesn't equal 0
+	 */
+
+	samp_mode = ad7292_spi_subreg_read(st, AD7292_REG_CONF_BANK,
+					   AD7292_BANK_REG_SAMP_MODE, 2);
+
+	if (samp_mode < 0)
+		return samp_mode;
+
+	range0 = ad7292_spi_subreg_read(st, AD7292_REG_CONF_BANK,
+					AD7292_BANK_REG_VIN_RNG0, 2);
+
+	if (range0 < 0)
+		return range0;
+
+	range1 = ad7292_spi_subreg_read(st, AD7292_REG_CONF_BANK,
+					AD7292_BANK_REG_VIN_RNG1, 2);
+
+	if (range1 < 0)
+		return range1;
+
+	if (AD7292_CH_SAMP_MODE(samp_mode, channel)) {
+		/* Sampling with respect to AGND */
+		if (!AD7292_CH_VIN_RANGE(range0, channel))
+			factor *= 2;
+
+		if (!AD7292_CH_VIN_RANGE(range1, channel))
+			factor *= 2;
+
+	} else {
+		/* Sampling with respect to AVDD */
+		if (AD7292_CH_VIN_RANGE(range0, channel) ||
+		    AD7292_CH_VIN_RANGE(range1, channel))
+			return -EPERM;
+
+		factor = 4;
+	}
+
+	return factor;
+}
+
+static int ad7292_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad7292_state *st = iio_priv(indio_dev);
+	unsigned int ch_addr;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ch_addr = AD7292_REG_ADC_CH(chan->channel);
+		ret = ad7292_single_conversion(st, ch_addr);
+		if (ret < 0)
+			return ret;
+
+		*val = AD7292_ADC_DATA(ret);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/*
+		 * To convert a raw value to standard units, the IIO defines
+		 * this formula: Scaled value = (raw + offset) * scale.
+		 * For the scale to be a correct multiplier for (raw + offset),
+		 * it must be calculated as the input range divided by the
+		 * number of possible distinct input values. Given the ADC data
+		 * is 10 bit long, it may assume 2^10 distinct values.
+		 * Hence, scale = range / 2^10. The IIO_VAL_FRACTIONAL_LOG2
+		 * return type indicates to the IIO API to divide *val by 2 to
+		 * the power of *val2 when returning from read_raw.
+		 */
+
+		ret = ad7292_vin_range_multiplier(st, chan->channel);
+		if (ret < 0)
+			return ret;
+
+		*val = st->vref_mv * ret;
+		*val2 = 10;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+static const struct iio_info ad7292_info = {
+	.read_raw = ad7292_read_raw,
+};
+
+static void ad7292_regulator_disable(void *data)
+{
+	struct ad7292_state *st = data;
+
+	regulator_disable(st->reg);
+}
+
+static int ad7292_probe(struct spi_device *spi)
+{
+	struct ad7292_state *st;
+	struct iio_dev *indio_dev;
+	struct device_node *child;
+	bool diff_channels = 0;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->spi = spi;
+
+	ret = ad7292_spi_reg_read(st, AD7292_REG_VENDOR_ID);
+	if (ret != ADI_VENDOR_ID) {
+		dev_err(&spi->dev, "Wrong vendor id 0x%x\n", ret);
+		return -EINVAL;
+	}
+
+	spi_set_drvdata(spi, indio_dev);
+
+	st->reg = devm_regulator_get_optional(&spi->dev, "vref");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret) {
+			dev_err(&spi->dev,
+				"Failed to enable external vref supply\n");
+			return ret;
+		}
+
+		ret = devm_add_action_or_reset(&spi->dev,
+					       ad7292_regulator_disable, st);
+		if (ret) {
+			regulator_disable(st->reg);
+			return ret;
+		}
+
+		ret = regulator_get_voltage(st->reg);
+		if (ret < 0)
+			return ret;
+
+		st->vref_mv = ret / 1000;
+	} else {
+		/* Use the internal voltage reference. */
+		st->vref_mv = 1250;
+	}
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ad7292_info;
+
+	for_each_available_child_of_node(spi->dev.of_node, child) {
+		diff_channels = of_property_read_bool(child, "diff-channels");
+		if (diff_channels)
+			break;
+	}
+
+	if (diff_channels) {
+		indio_dev->num_channels = ARRAY_SIZE(ad7292_channels_diff);
+		indio_dev->channels = ad7292_channels_diff;
+	} else {
+		indio_dev->num_channels = ARRAY_SIZE(ad7292_channels);
+		indio_dev->channels = ad7292_channels;
+	}
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ad7292_id_table[] = {
+	{ "ad7292", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7292_id_table);
+
+static const struct of_device_id ad7292_of_match[] = {
+	{ .compatible = "adi,ad7292" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7292_of_match);
+
+static struct spi_driver ad7292_driver = {
+	.driver = {
+		.name = "ad7292",
+		.of_match_table = ad7292_of_match,
+	},
+	.probe = ad7292_probe,
+	.id_table = ad7292_id_table,
+};
+module_spi_driver(ad7292_driver);
+
+MODULE_AUTHOR("Marcelo Schmitt <marcelo.schmitt1@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices AD7292 ADC driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/adc/aspeed_adc.c

@@ -173,7 +173,6 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	struct iio_dev *indio_dev;
 	struct aspeed_adc_data *data;
 	const struct aspeed_adc_model_data *model_data;
-	struct resource *res;
 	const char *clk_parent_name;
 	int ret;
 	u32 adc_engine_control_reg_val;
@@ -185,8 +184,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	data = iio_priv(indio_dev);
 	data->dev = &pdev->dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->base = devm_ioremap_resource(&pdev->dev, res);
+	data->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(data->base))
 		return PTR_ERR(data->base);
 

drivers/iio/adc/bcm_iproc_adc.c

@@ -308,7 +308,7 @@ static int iproc_adc_do_read(struct iio_dev *indio_dev,
 				"IntMask set failed. Read will likely fail.");
 			read_len = -EIO;
 			goto adc_err;
-		};
+		}
 	}
 	regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val_check);
 

drivers/iio/adc/cc10001_adc.c

@@ -310,7 +310,6 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	struct cc10001_adc_device *adc_dev;
 	unsigned long adc_clk_rate;
-	struct resource *res;
 	struct iio_dev *indio_dev;
 	unsigned long channel_map;
 	int ret;
@@ -340,8 +339,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	indio_dev->info = &cc10001_adc_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	adc_dev->reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(adc_dev->reg_base)) {
 		ret = PTR_ERR(adc_dev->reg_base);
 		goto err_disable_reg;

drivers/iio/adc/dln2-adc.c

@@ -524,6 +524,10 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 	u16 conflict;
 	unsigned int trigger_chan;
 
+	ret = iio_triggered_buffer_postenable(indio_dev);
+	if (ret)
+		return ret;
+
 	mutex_lock(&dln2->mutex);
 
 	/* Enable ADC */
@@ -537,6 +541,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 				(int)conflict);
 			ret = -EBUSY;
 		}
+		iio_triggered_buffer_predisable(indio_dev);
 		return ret;
 	}
 
@@ -550,6 +555,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 		mutex_unlock(&dln2->mutex);
 		if (ret < 0) {
 			dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
+			iio_triggered_buffer_predisable(indio_dev);
 			return ret;
 		}
 	} else {
@@ -557,12 +563,12 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 		mutex_unlock(&dln2->mutex);
 	}
 
-	return iio_triggered_buffer_postenable(indio_dev);
+	return 0;
 }
 
 static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int ret;
+	int ret, ret2;
 	struct dln2_adc *dln2 = iio_priv(indio_dev);
 
 	mutex_lock(&dln2->mutex);
@@ -577,12 +583,14 @@ static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
 	ret = dln2_adc_set_port_enabled(dln2, false, NULL);
 
 	mutex_unlock(&dln2->mutex);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
-		return ret;
-	}
 
-	return iio_triggered_buffer_predisable(indio_dev);
+	ret2 = iio_triggered_buffer_predisable(indio_dev);
+	if (ret == 0)
+		ret = ret2;
+
+	return ret;
 }
 
 static const struct iio_buffer_setup_ops dln2_adc_buffer_setup_ops = {

drivers/iio/adc/ingenic-adc.c

@@ -428,7 +428,6 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct iio_dev *iio_dev;
 	struct ingenic_adc *adc;
-	struct resource *mem_base;
 	const struct ingenic_adc_soc_data *soc_data;
 	int ret;
 
@@ -445,8 +444,7 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	mutex_init(&adc->aux_lock);
 	adc->soc_data = soc_data;
 
-	mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	adc->base = devm_ioremap_resource(dev, mem_base);
+	adc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(adc->base))
 		return PTR_ERR(adc->base);
 

drivers/iio/adc/lpc18xx_adc.c

@@ -119,7 +119,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
 	struct lpc18xx_adc *adc;
-	struct resource *res;
 	unsigned int clkdiv;
 	unsigned long rate;
 	int ret;
@@ -133,8 +132,7 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
 	adc->dev = &pdev->dev;
 	mutex_init(&adc->lock);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	adc->base = devm_ioremap_resource(&pdev->dev, res);
+	adc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(adc->base))
 		return PTR_ERR(adc->base);
 

drivers/iio/adc/mt6577_auxadc.c

@@ -237,7 +237,6 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
 {
 	struct mt6577_auxadc_device *adc_dev;
 	unsigned long adc_clk_rate;
-	struct resource *res;
 	struct iio_dev *indio_dev;
 	int ret;
 
@@ -253,8 +252,7 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
 	indio_dev->channels = mt6577_auxadc_iio_channels;
 	indio_dev->num_channels = ARRAY_SIZE(mt6577_auxadc_iio_channels);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	adc_dev->reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(adc_dev->reg_base)) {
 		dev_err(&pdev->dev, "failed to get auxadc base address\n");
 		return PTR_ERR(adc_dev->reg_base);

drivers/iio/adc/npcm_adc.c

@@ -183,7 +183,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	int irq;
 	u32 div;
 	u32 reg_con;
-	struct resource *res;
 	struct npcm_adc *info;
 	struct iio_dev *indio_dev;
 	struct device *dev = &pdev->dev;
@@ -196,8 +195,7 @@ static int npcm_adc_probe(struct platform_device *pdev)
 
 	info->dev = &pdev->dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	info->regs = devm_ioremap_resource(&pdev->dev, res);
+	info->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 

drivers/iio/adc/rcar-gyroadc.c

@@ -481,7 +481,6 @@ static int rcar_gyroadc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct rcar_gyroadc *priv;
 	struct iio_dev *indio_dev;
-	struct resource *mem;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
@@ -491,8 +490,7 @@ static int rcar_gyroadc_probe(struct platform_device *pdev)
 	priv = iio_priv(indio_dev);
 	priv->dev = dev;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->regs = devm_ioremap_resource(dev, mem);
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->regs))
 		return PTR_ERR(priv->regs);
 

drivers/iio/adc/spear_adc.c

@@ -260,7 +260,6 @@ static int spear_adc_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct spear_adc_state *st;
-	struct resource *res;
 	struct iio_dev *indio_dev = NULL;
 	int ret = -ENODEV;
 	int irq;
@@ -279,8 +278,7 @@ static int spear_adc_probe(struct platform_device *pdev)
 	 * (e.g. SPEAr3xx). Let's provide two register base addresses
 	 * to support multi-arch kernels.
 	 */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	st->adc_base_spear6xx = devm_ioremap_resource(&pdev->dev, res);
+	st->adc_base_spear6xx = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(st->adc_base_spear6xx))
 		return PTR_ERR(st->adc_base_spear6xx);
 

drivers/iio/adc/stm32-adc-core.c

@@ -79,6 +79,7 @@ struct stm32_adc_priv_cfg {
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
+ * @max_clk_rate:	desired maximum clock rate
  * @booster:		booster supply reference
  * @vdd:		vdd supply reference
  * @vdda:		vdda analog supply reference
@@ -95,6 +96,7 @@ struct stm32_adc_priv {
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
+	u32				max_clk_rate;
 	struct regulator		*booster;
 	struct regulator		*vdd;
 	struct regulator		*vdda;
@@ -141,7 +143,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
 	}
 
 	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
-		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
+		if ((rate / stm32f4_pclk_div[i]) <= priv->max_clk_rate)
 			break;
 	}
 	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
@@ -230,7 +232,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 			if (ckmode)
 				continue;
 
-			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
+			if ((rate / div) <= priv->max_clk_rate)
 				goto out;
 		}
 	}
@@ -250,7 +252,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 		if (!ckmode)
 			continue;
 
-		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
+		if ((rate / div) <= priv->max_clk_rate)
 			goto out;
 	}
 
@@ -655,6 +657,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
+	u32 max_rate;
 	int ret;
 
 	if (!pdev->dev.of_node)
@@ -731,6 +734,13 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	priv->common.vref_mv = ret / 1000;
 	dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
 
+	ret = of_property_read_u32(pdev->dev.of_node, "st,max-clk-rate-hz",
+				   &max_rate);
+	if (!ret)
+		priv->max_clk_rate = min(max_rate, priv->cfg->max_clk_rate_hz);
+	else
+		priv->max_clk_rate = priv->cfg->max_clk_rate_hz;
+
 	ret = priv->cfg->clk_sel(pdev, priv);
 	if (ret < 0)
 		goto err_hw_stop;

drivers/iio/adc/vf610_adc.c

@@ -802,7 +802,6 @@ static int vf610_adc_probe(struct platform_device *pdev)
 {
 	struct vf610_adc *info;
 	struct iio_dev *indio_dev;
-	struct resource *mem;
 	int irq;
 	int ret;
 
@@ -815,8 +814,7 @@ static int vf610_adc_probe(struct platform_device *pdev)
 	info = iio_priv(indio_dev);
 	info->dev = &pdev->dev;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	info->regs = devm_ioremap_resource(&pdev->dev, mem);
+	info->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 

drivers/iio/dac/Kconfig

@@ -60,8 +60,8 @@ config AD5446
 	help
 	  Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
 	  AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
-	  AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612,
-	  AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs
+	  AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5600, AD5601, AD5602, AD5611,
+	  AD5612, AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs
 	  as well as Texas Instruments DAC081S101, DAC101S101, DAC121S101.
 
 	  To compile this driver as a module, choose M here: the

drivers/iio/dac/ad5446.c

@@ -327,6 +327,7 @@ enum ad5446_supported_spi_device_ids {
 	ID_AD5541A,
 	ID_AD5512A,
 	ID_AD5553,
+	ID_AD5600,
 	ID_AD5601,
 	ID_AD5611,
 	ID_AD5621,
@@ -381,6 +382,10 @@ static const struct ad5446_chip_info ad5446_spi_chip_info[] = {
 		.channel = AD5446_CHANNEL(14, 16, 0),
 		.write = ad5446_write,
 	},
+	[ID_AD5600] = {
+		.channel = AD5446_CHANNEL(16, 16, 0),
+		.write = ad5446_write,
+	},
 	[ID_AD5601] = {
 		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
 		.write = ad5446_write,
@@ -448,6 +453,7 @@ static const struct spi_device_id ad5446_spi_ids[] = {
 	{"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */
 	{"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */
 	{"ad5553", ID_AD5553},
+	{"ad5600", ID_AD5600},
 	{"ad5601", ID_AD5601},
 	{"ad5611", ID_AD5611},
 	{"ad5621", ID_AD5621},

drivers/iio/dac/lpc18xx_dac.c

@@ -106,7 +106,6 @@ static int lpc18xx_dac_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
 	struct lpc18xx_dac *dac;
-	struct resource *res;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*dac));
@@ -117,8 +116,7 @@ static int lpc18xx_dac_probe(struct platform_device *pdev)
 	dac = iio_priv(indio_dev);
 	mutex_init(&dac->lock);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dac->base = devm_ioremap_resource(&pdev->dev, res);
+	dac->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dac->base))
 		return PTR_ERR(dac->base);
 

drivers/iio/dac/vf610_dac.c

@@ -172,7 +172,6 @@ static int vf610_dac_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
 	struct vf610_dac *info;
-	struct resource *mem;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev,
@@ -185,8 +184,7 @@ static int vf610_dac_probe(struct platform_device *pdev)
 	info = iio_priv(indio_dev);
 	info->dev = &pdev->dev;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	info->regs = devm_ioremap_resource(&pdev->dev, mem);
+	info->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 

drivers/iio/gyro/adis16136.c

@@ -80,19 +80,19 @@ static ssize_t adis16136_show_serial(struct file *file,
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SERIAL_NUM,
 		&serial);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT1, &lot1);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT2, &lot2);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT3, &lot3);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	len = snprintf(buf, sizeof(buf), "%.4x%.4x%.4x-%.4x\n", lot1, lot2,
@@ -116,7 +116,7 @@ static int adis16136_show_product_id(void *arg, u64 *val)
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_PROD_ID,
 		&prod_id);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*val = prod_id;
@@ -134,7 +134,7 @@ static int adis16136_show_flash_count(void *arg, u64 *val)
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_FLASH_CNT,
 		&flash_count);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*val = flash_count;
@@ -191,7 +191,7 @@ static int adis16136_get_freq(struct adis16136 *adis16136, unsigned int *freq)
 	int ret;
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, &t);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*freq = 32768 / (t + 1);
@@ -228,7 +228,7 @@ static ssize_t adis16136_read_frequency(struct device *dev,
 	int ret;
 
 	ret = adis16136_get_freq(adis16136, &freq);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	return sprintf(buf, "%d\n", freq);
@@ -256,7 +256,7 @@ static int adis16136_set_filter(struct iio_dev *indio_dev, int val)
 	int i, ret;
 
 	ret = adis16136_get_freq(adis16136, &freq);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	for (i = ARRAY_SIZE(adis16136_3db_divisors) - 1; i >= 1; i--) {
@@ -277,11 +277,11 @@ static int adis16136_get_filter(struct iio_dev *indio_dev, int *val)
 	mutex_lock(&indio_dev->mlock);
 
 	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT, &val16);
-	if (ret < 0)
+	if (ret)
 		goto err_unlock;
 
 	ret = adis16136_get_freq(adis16136, &freq);
-	if (ret < 0)
+	if (ret)
 		goto err_unlock;
 
 	*val = freq / adis16136_3db_divisors[val16 & 0x07];
@@ -318,7 +318,7 @@ static int adis16136_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_CALIBBIAS:
 		ret = adis_read_reg_32(&adis16136->adis,
 			ADIS16136_REG_GYRO_OFF2, &val32);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		*val = sign_extend32(val32, 31);

drivers/iio/humidity/hdc100x.c

@@ -278,31 +278,34 @@ static int hdc100x_buffer_postenable(struct iio_dev *indio_dev)
 	struct hdc100x_data *data = iio_priv(indio_dev);
 	int ret;
 
+	ret = iio_triggered_buffer_postenable(indio_dev);
+	if (ret)
+		return ret;
+
 	/* Buffer is enabled. First set ACQ Mode, then attach poll func */
 	mutex_lock(&data->lock);
 	ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
 				    HDC100X_REG_CONFIG_ACQ_MODE);
 	mutex_unlock(&data->lock);
 	if (ret)
-		return ret;
+		iio_triggered_buffer_predisable(indio_dev);
 
-	return iio_triggered_buffer_postenable(indio_dev);
+	return ret;
 }
 
 static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct hdc100x_data *data = iio_priv(indio_dev);
-	int ret;
-
-	/* First detach poll func, then reset ACQ mode. OK to disable buffer */
-	ret = iio_triggered_buffer_predisable(indio_dev);
-	if (ret)
-		return ret;
+	int ret, ret2;
 
 	mutex_lock(&data->lock);
 	ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0);
 	mutex_unlock(&data->lock);
 
+	ret2 = iio_triggered_buffer_predisable(indio_dev);
+	if (ret == 0)
+		ret = ret2;
+
 	return ret;
 }
 

drivers/iio/imu/adis.c

@@ -229,6 +229,7 @@ int adis_debugfs_reg_access(struct iio_dev *indio_dev,
 		int ret;
 
 		ret = adis_read_reg_16(adis, reg, &val16);
+		if (ret == 0)
 			*readval = val16;
 
 		return ret;
@@ -286,7 +287,7 @@ int adis_check_status(struct adis *adis)
 	int i;
 
 	ret = adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	status &= adis->data->status_error_mask;

drivers/iio/imu/adis16400.c

@@ -217,16 +217,16 @@ static ssize_t adis16400_show_serial_number(struct file *file,
 	int ret;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16334_LOT_ID1, &lot1);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16334_LOT_ID2, &lot2);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16334_SERIAL_NUMBER,
 			&serial_number);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	len = snprintf(buf, sizeof(buf), "%.4x-%.4x-%.4x\n", lot1, lot2,
@@ -249,7 +249,7 @@ static int adis16400_show_product_id(void *arg, u64 *val)
 	int ret;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16400_PRODUCT_ID, &prod_id);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*val = prod_id;
@@ -266,7 +266,7 @@ static int adis16400_show_flash_count(void *arg, u64 *val)
 	int ret;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16400_FLASH_CNT, &flash_count);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*val = flash_count;
@@ -327,7 +327,7 @@ static int adis16334_get_freq(struct adis16400_state *st)
 	uint16_t t;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	t >>= ADIS16334_RATE_DIV_SHIFT;
@@ -359,7 +359,7 @@ static int adis16400_get_freq(struct adis16400_state *st)
 	uint16_t t;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	sps = (t & ADIS16400_SMPL_PRD_TIME_BASE) ? 52851 : 1638404;
@@ -416,7 +416,7 @@ static int adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
 	}
 
 	ret = adis_read_reg_16(&st->adis, ADIS16400_SENS_AVG, &val16);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = adis_write_reg_16(&st->adis, ADIS16400_SENS_AVG,
@@ -615,7 +615,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 		ret = adis_read_reg_16(&st->adis,
 						ADIS16400_SENS_AVG,
 						&val16);
-		if (ret < 0) {
+		if (ret) {
 			mutex_unlock(&indio_dev->mlock);
 			return ret;
 		}
@@ -626,12 +626,12 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 			*val2 = (ret % 1000) * 1000;
 		}
 		mutex_unlock(&indio_dev->mlock);
-		if (ret < 0)
+		if (ret)
 			return ret;
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret = st->variant->get_freq(st);
-		if (ret < 0)
+		if (ret)
 			return ret;
 		*val = ret / 1000;
 		*val2 = (ret % 1000) * 1000;

drivers/iio/imu/adis16460.c

@@ -80,7 +80,7 @@ static int adis16460_show_serial_number(void *arg, u64 *val)
 
 	ret = adis_read_reg_16(&adis16460->adis, ADIS16460_REG_SERIAL_NUM,
 		&serial);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*val = serial;
@@ -98,7 +98,7 @@ static int adis16460_show_product_id(void *arg, u64 *val)
 
 	ret = adis_read_reg_16(&adis16460->adis, ADIS16460_REG_PROD_ID,
 		&prod_id);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*val = prod_id;
@@ -116,7 +116,7 @@ static int adis16460_show_flash_count(void *arg, u64 *val)
 
 	ret = adis_read_reg_32(&adis16460->adis, ADIS16460_REG_FLASH_CNT,
 		&flash_count);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	*val = flash_count;
@@ -176,7 +176,7 @@ static int adis16460_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
 	unsigned int freq;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16460_REG_DEC_RATE, &t);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	freq = 2048000 / (t + 1);

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -1149,14 +1149,14 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
 	return result;
 }
 
-static int inv_mpu_core_enable_regulator(struct inv_mpu6050_state *st)
+static int inv_mpu_core_enable_regulator_vddio(struct inv_mpu6050_state *st)
 {
 	int result;
 
 	result = regulator_enable(st->vddio_supply);
 	if (result) {
 		dev_err(regmap_get_device(st->map),
-			"Failed to enable regulator: %d\n", result);
+			"Failed to enable vddio regulator: %d\n", result);
 	} else {
 		/* Give the device a little bit of time to start up. */
 		usleep_range(35000, 70000);
@@ -1165,21 +1165,29 @@ static int inv_mpu_core_enable_regulator(struct inv_mpu6050_state *st)
 	return result;
 }
 
-static int inv_mpu_core_disable_regulator(struct inv_mpu6050_state *st)
+static int inv_mpu_core_disable_regulator_vddio(struct inv_mpu6050_state *st)
 {
 	int result;
 
 	result = regulator_disable(st->vddio_supply);
 	if (result)
 		dev_err(regmap_get_device(st->map),
-			"Failed to disable regulator: %d\n", result);
+			"Failed to disable vddio regulator: %d\n", result);
 
 	return result;
 }
 
 static void inv_mpu_core_disable_regulator_action(void *_data)
 {
-	inv_mpu_core_disable_regulator(_data);
+	struct inv_mpu6050_state *st = _data;
+	int result;
+
+	result = regulator_disable(st->vdd_supply);
+	if (result)
+		dev_err(regmap_get_device(st->map),
+			"Failed to disable vdd regulator: %d\n", result);
+
+	inv_mpu_core_disable_regulator_vddio(st);
 }
 
 int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
@@ -1248,6 +1256,15 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 		return -EINVAL;
 	}
 
+	st->vdd_supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(st->vdd_supply)) {
+		if (PTR_ERR(st->vdd_supply) != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get vdd regulator %d\n",
+				(int)PTR_ERR(st->vdd_supply));
+
+		return PTR_ERR(st->vdd_supply);
+	}
+
 	st->vddio_supply = devm_regulator_get(dev, "vddio");
 	if (IS_ERR(st->vddio_supply)) {
 		if (PTR_ERR(st->vddio_supply) != -EPROBE_DEFER)
@@ -1257,9 +1274,17 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 		return PTR_ERR(st->vddio_supply);
 	}
 
-	result = inv_mpu_core_enable_regulator(st);
-	if (result)
+	result = regulator_enable(st->vdd_supply);
+	if (result) {
+		dev_err(dev, "Failed to enable vdd regulator: %d\n", result);
 		return result;
+	}
+
+	result = inv_mpu_core_enable_regulator_vddio(st);
+	if (result) {
+		regulator_disable(st->vdd_supply);
+		return result;
+	}
 
 	result = devm_add_action_or_reset(dev, inv_mpu_core_disable_regulator_action,
 				 st);
@@ -1361,7 +1386,7 @@ static int inv_mpu_resume(struct device *dev)
 	int result;
 
 	mutex_lock(&st->lock);
-	result = inv_mpu_core_enable_regulator(st);
+	result = inv_mpu_core_enable_regulator_vddio(st);
 	if (result)
 		goto out_unlock;
 
@@ -1379,7 +1404,7 @@ static int inv_mpu_suspend(struct device *dev)
 
 	mutex_lock(&st->lock);
 	result = inv_mpu6050_set_power_itg(st, false);
-	inv_mpu_core_disable_regulator(st);
+	inv_mpu_core_disable_regulator_vddio(st);
 	mutex_unlock(&st->lock);
 
 	return result;

drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h

@@ -132,7 +132,8 @@ struct inv_mpu6050_hw {
  *  @chip_period:	chip internal period estimation (~1kHz).
  *  @it_timestamp:	timestamp from previous interrupt.
  *  @data_timestamp:	timestamp for next data sample.
- *  @vddio_supply	voltage regulator for the chip.
+ *  @vdd_supply:	VDD voltage regulator for the chip.
+ *  @vddio_supply	I/O voltage regulator for the chip.
  *  @magn_disabled:     magnetometer disabled for backward compatibility reason.
  *  @magn_raw_to_gauss:	coefficient to convert mag raw value to Gauss.
  *  @magn_orient:       magnetometer sensor chip orientation if available.
@@ -156,6 +157,7 @@ struct inv_mpu6050_state {
 	s64 chip_period;
 	s64 it_timestamp;
 	s64 data_timestamp;
+	struct regulator *vdd_supply;
 	struct regulator *vddio_supply;
 	bool magn_disabled;
 	s32 magn_raw_to_gauss[3];

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h

@@ -106,14 +106,16 @@ struct st_lsm6dsx_sensor;
 struct st_lsm6dsx_hw;
 
 struct st_lsm6dsx_odr {
-	u16 hz;
+	u32 milli_hz;
 	u8 val;
 };
 
 #define ST_LSM6DSX_ODR_LIST_SIZE	6
 struct st_lsm6dsx_odr_table_entry {
 	struct st_lsm6dsx_reg reg;
+
 	struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
+	int odr_len;
 };
 
 struct st_lsm6dsx_fs {
@@ -328,7 +330,7 @@ struct st_lsm6dsx_sensor {
 	struct st_lsm6dsx_hw *hw;
 
 	u32 gain;
-	u16 odr;
+	u32 odr;
 
 	u16 watermark;
 	u8 sip;
@@ -413,7 +415,7 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
 			     enum st_lsm6dsx_fifo_mode fifo_mode);
 int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw);
 int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw);
-int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val);
+int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u32 odr, u8 *val);
 int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name);
 int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable);
 int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable);

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c

@@ -91,7 +91,7 @@ static int st_lsm6dsx_get_decimator_val(u8 val)
 }
 
 static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
-				       u16 *max_odr, u16 *min_odr)
+				       u32 *max_odr, u32 *min_odr)
 {
 	struct st_lsm6dsx_sensor *sensor;
 	int i;
@@ -106,16 +106,17 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;
 
-		*max_odr = max_t(u16, *max_odr, sensor->odr);
-		*min_odr = min_t(u16, *min_odr, sensor->odr);
+		*max_odr = max_t(u32, *max_odr, sensor->odr);
+		*min_odr = min_t(u32, *min_odr, sensor->odr);
 	}
 }
 
 static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 {
-	u16 max_odr, min_odr, sip = 0, ts_sip = 0;
 	const struct st_lsm6dsx_reg *ts_dec_reg;
 	struct st_lsm6dsx_sensor *sensor;
+	u16 sip = 0, ts_sip = 0;
+	u32 max_odr, min_odr;
 	int err = 0, i;
 	u8 data;
 

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c

@@ -51,10 +51,11 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
 				.addr = 0x60,
 				.mask = GENMASK(3, 2),
 			},
-			.odr_avl[0] = {  10, 0x0 },
-			.odr_avl[1] = {  20, 0x1 },
-			.odr_avl[2] = {  50, 0x2 },
-			.odr_avl[3] = { 100, 0x3 },
+			.odr_avl[0] = {  10000, 0x0 },
+			.odr_avl[1] = {  20000, 0x1 },
+			.odr_avl[2] = {  50000, 0x2 },
+			.odr_avl[3] = { 100000, 0x3 },
+			.odr_len = 4,
 		},
 		.fs_table = {
 			.fs_avl[0] = {
@@ -93,11 +94,11 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
 static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
 {
 	struct st_lsm6dsx_sensor *sensor;
-	u16 odr;
+	u32 odr;
 
 	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
-	odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 13;
-	msleep((2000U / odr) + 1);
+	odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500;
+	msleep((2000000U / odr) + 1);
 }
 
 /**
@@ -317,17 +318,18 @@ st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor,
 
 static int
 st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor,
-			    u16 odr, u16 *val)
+			    u32 odr, u16 *val)
 {
 	const struct st_lsm6dsx_ext_dev_settings *settings;
 	int i;
 
 	settings = sensor->ext_info.settings;
-	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
-		if (settings->odr_table.odr_avl[i].hz == odr)
+	for (i = 0; i < settings->odr_table.odr_len; i++) {
+		if (settings->odr_table.odr_avl[i].milli_hz == odr)
 			break;
+	}
 
-	if (i == ST_LSM6DSX_ODR_LIST_SIZE)
+	if (i == settings->odr_table.odr_len)
 		return -EINVAL;
 
 	*val = settings->odr_table.odr_avl[i].val;
@@ -335,7 +337,7 @@ st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor,
 }
 
 static int
-st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr)
+st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u32 odr)
 {
 	const struct st_lsm6dsx_ext_dev_settings *settings;
 	u16 val;
@@ -440,7 +442,7 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
 	if (err < 0)
 		return err;
 
-	delay = 1000000 / sensor->odr;
+	delay = 1000000000 / sensor->odr;
 	usleep_range(delay, 2 * delay);
 
 	len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
@@ -480,8 +482,9 @@ st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
 		iio_device_release_direct_mode(iio_dev);
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = sensor->odr;
-		ret = IIO_VAL_INT;
+		*val = sensor->odr / 1000;
+		*val2 = (sensor->odr % 1000) * 1000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 0;
@@ -512,6 +515,7 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 	case IIO_CHAN_INFO_SAMP_FREQ: {
 		u16 data;
 
+		val = val * 1000 + val2 / 1000;
 		err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
 		if (!err)
 			sensor->odr = val;
@@ -537,12 +541,11 @@ st_lsm6dsx_shub_sampling_freq_avail(struct device *dev,
 	int i, len = 0;
 
 	settings = sensor->ext_info.settings;
-	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) {
-		u16 val = settings->odr_table.odr_avl[i].hz;
+	for (i = 0; i < settings->odr_table.odr_len; i++) {
+		u32 val = settings->odr_table.odr_avl[i].milli_hz;
 
-		if (val > 0)
-			len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
-					 val);
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ",
+				 val / 1000, val % 1000);
 	}
 	buf[len - 1] = '\n';
 
@@ -607,7 +610,7 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	sensor = iio_priv(iio_dev);
 	sensor->id = id;
 	sensor->hw = hw;
-	sensor->odr = info->odr_table.odr_avl[0].hz;
+	sensor->odr = info->odr_table.odr_avl[0].milli_hz;
 	sensor->gain = info->fs_table.fs_avl[0].gain;
 	sensor->ext_info.settings = info;
 	sensor->ext_info.addr = i2c_addr;

drivers/iio/light/Kconfig

@@ -507,6 +507,17 @@ config VCNL4035
 	  To compile this driver as a module, choose M here: the
 	  module will be called vcnl4035.
 
+config VEML6030
+	tristate "VEML6030 ambient light sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VEML6030
+	  ambient light sensor (ALS).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called veml6030.
+
 config VEML6070
 	tristate "VEML6070 UV A light sensor"
 	depends on I2C

drivers/iio/light/Makefile

@@ -49,6 +49,7 @@ obj-$(CONFIG_TSL4531)		+= tsl4531.o
 obj-$(CONFIG_US5182D)		+= us5182d.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
 obj-$(CONFIG_VCNL4035)		+= vcnl4035.o
+obj-$(CONFIG_VEML6030)		+= veml6030.o
 obj-$(CONFIG_VEML6070)		+= veml6070.o
 obj-$(CONFIG_VL6180)		+= vl6180.o
 obj-$(CONFIG_ZOPT2201)		+= zopt2201.o

drivers/iio/pressure/cros_ec_baro.c

@@ -114,6 +114,7 @@ static int cros_ec_baro_write(struct iio_dev *indio_dev,
 static const struct iio_info cros_ec_baro_info = {
 	.read_raw = &cros_ec_baro_read,
 	.write_raw = &cros_ec_baro_write,
+	.read_avail = &cros_ec_sensors_core_read_avail,
 };
 
 static int cros_ec_baro_probe(struct platform_device *pdev)
@@ -149,6 +150,8 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 		BIT(IIO_CHAN_INFO_SCALE) |
 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 		BIT(IIO_CHAN_INFO_FREQUENCY);
+	channel->info_mask_shared_by_all_available =
+		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
 	channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
 	channel->scan_type.shift = 0;

include/linux/iio/imu/adis.h

@@ -129,6 +129,7 @@ static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
 	int ret;
 
 	ret = adis_read_reg(adis, reg, &tmp, 2);
+	if (ret == 0)
 		*val = tmp;
 
 	return ret;
@@ -147,6 +148,7 @@ static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
 	int ret;
 
 	ret = adis_read_reg(adis, reg, &tmp, 4);
+	if (ret == 0)
 		*val = tmp;
 
 	return ret;

tools/iio/Build

+iio_utils-y += iio_utils.o
 lsiio-y += lsiio.o iio_utils.o
 iio_event_monitor-y += iio_event_monitor.o iio_utils.o
 iio_generic_buffer-y += iio_generic_buffer.o iio_utils.o

tools/iio/Makefile

@@ -32,20 +32,24 @@ $(OUTPUT)include/linux/iio: ../../include/uapi/linux/iio
 
 prepare: $(OUTPUT)include/linux/iio
 
+IIO_UTILS_IN := $(OUTPUT)iio_utils-in.o
+$(IIO_UTILS_IN): prepare FORCE
+	$(Q)$(MAKE) $(build)=iio_utils
+
 LSIIO_IN := $(OUTPUT)lsiio-in.o
-$(LSIIO_IN): prepare FORCE
+$(LSIIO_IN): prepare FORCE $(OUTPUT)iio_utils-in.o
 	$(Q)$(MAKE) $(build)=lsiio
 $(OUTPUT)lsiio: $(LSIIO_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
 
 IIO_EVENT_MONITOR_IN := $(OUTPUT)iio_event_monitor-in.o
-$(IIO_EVENT_MONITOR_IN): prepare FORCE
+$(IIO_EVENT_MONITOR_IN): prepare FORCE $(OUTPUT)iio_utils-in.o
 	$(Q)$(MAKE) $(build)=iio_event_monitor
 $(OUTPUT)iio_event_monitor: $(IIO_EVENT_MONITOR_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
 
 IIO_GENERIC_BUFFER_IN := $(OUTPUT)iio_generic_buffer-in.o
-$(IIO_GENERIC_BUFFER_IN): prepare FORCE
+$(IIO_GENERIC_BUFFER_IN): prepare FORCE $(OUTPUT)iio_utils-in.o
 	$(Q)$(MAKE) $(build)=iio_generic_buffer
 $(OUTPUT)iio_generic_buffer: $(IIO_GENERIC_BUFFER_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@