Commit 90795c56 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard

ARM: dts: sun6i: Add support for the status led

The Mele M9 / A1000G quad has a blue status led, add support for this.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 5070ac3e
...@@ -82,6 +82,13 @@ ehci1: usb@01c1b000 { ...@@ -82,6 +82,13 @@ ehci1: usb@01c1b000 {
}; };
pio: pinctrl@01c20800 { pio: pinctrl@01c20800 {
led_pins_m9: led_pins@0 {
allwinner,pins = "PH13";
allwinner,function = "gpio_out";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 { mmc0_cd_pin_m9: mmc0_cd_pin@0 {
allwinner,pins = "PH22"; allwinner,pins = "PH22";
allwinner,function = "gpio_in"; allwinner,function = "gpio_in";
...@@ -104,6 +111,17 @@ uart0: serial@01c28000 { ...@@ -104,6 +111,17 @@ uart0: serial@01c28000 {
}; };
}; };
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_m9>;
blue {
label = "m9:blue:usr";
gpios = <&pio 7 13 0>;
};
};
reg_usb1_vbus: usb1-vbus { reg_usb1_vbus: usb1-vbus {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_m9>; pinctrl-0 = <&usb1_vbus_pin_m9>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment