ixgbevf: Remove checking for mac.ops function pointers

The function pointers will always be set - there is no good reason to
check them.  Also just remove get_bus_info() call as the VF has no bus
info to report.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

@@ -1150,9 +1150,6 @@ static int ixgbevf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 	struct ixgbe_hw *hw = &adapter->hw;
 	int err;
 
-	if (!hw->mac.ops.set_vfta)
-		return -EOPNOTSUPP;
-
 	spin_lock_bh(&adapter->mbx_lock);
 
 	/* add VID to filter table */
@@ -1181,8 +1178,7 @@ static int ixgbevf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	spin_lock_bh(&adapter->mbx_lock);
 
 	/* remove VID from filter table */
-	if (hw->mac.ops.set_vfta)
-		err = hw->mac.ops.set_vfta(hw, vid, 0, false);
+	err = hw->mac.ops.set_vfta(hw, vid, 0, false);
 
 	spin_unlock_bh(&adapter->mbx_lock);
 
@@ -1243,8 +1239,7 @@ static void ixgbevf_set_rx_mode(struct net_device *netdev)
 	spin_lock_bh(&adapter->mbx_lock);
 
 	/* reprogram multicast list */
-	if (hw->mac.ops.update_mc_addr_list)
-		hw->mac.ops.update_mc_addr_list(hw, netdev);
+	hw->mac.ops.update_mc_addr_list(hw, netdev);
 
 	ixgbevf_write_uc_addr_list(netdev);
 
@@ -1414,12 +1409,10 @@ static void ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
 
 	spin_lock_bh(&adapter->mbx_lock);
 
-	if (hw->mac.ops.set_rar) {
-		if (is_valid_ether_addr(hw->mac.addr))
-			hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
-		else
-			hw->mac.ops.set_rar(hw, 0, hw->mac.perm_addr, 0);
-	}
+	if (is_valid_ether_addr(hw->mac.addr))
+		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
+	else
+		hw->mac.ops.set_rar(hw, 0, hw->mac.perm_addr, 0);
 
 	spin_unlock_bh(&adapter->mbx_lock);
 
@@ -2201,6 +2194,7 @@ static void ixgbevf_watchdog_task(struct work_struct *work)
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 link_speed = adapter->link_speed;
 	bool link_up = adapter->link_up;
+	s32 need_reset;
 
 	adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
 
@@ -2208,29 +2202,20 @@ static void ixgbevf_watchdog_task(struct work_struct *work)
 	 * Always check the link on the watchdog because we have
 	 * no LSC interrupt
 	 */
-	if (hw->mac.ops.check_link) {
-		s32 need_reset;
 
-		spin_lock_bh(&adapter->mbx_lock);
+	spin_lock_bh(&adapter->mbx_lock);
 
-		need_reset = hw->mac.ops.check_link(hw, &link_speed,
-						    &link_up, false);
+	need_reset = hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
 
-		spin_unlock_bh(&adapter->mbx_lock);
+	spin_unlock_bh(&adapter->mbx_lock);
 
-		if (need_reset) {
-			adapter->link_up = link_up;
-			adapter->link_speed = link_speed;
-			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
-			schedule_work(&adapter->reset_task);
-			goto pf_has_reset;
-		}
-	} else {
-		/* always assume link is up, if no check link
-		 * function */
-		link_speed = IXGBE_LINK_SPEED_10GB_FULL;
-		link_up = true;
+	if (need_reset) {
+		adapter->link_up = link_up;
+		adapter->link_speed = link_speed;
+		netif_carrier_off(netdev);
+		netif_tx_stop_all_queues(netdev);
+		schedule_work(&adapter->reset_task);
+		goto pf_has_reset;
 	}
 	adapter->link_up = link_up;
 	adapter->link_speed = link_speed;
@@ -3070,8 +3055,7 @@ static int ixgbevf_set_mac(struct net_device *netdev, void *p)
 
 	spin_lock_bh(&adapter->mbx_lock);
 
-	if (hw->mac.ops.set_rar)
-		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
+	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
 
 	spin_unlock_bh(&adapter->mbx_lock);
 
@@ -3396,10 +3380,6 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_sw_init;
 
-	/* pick up the PCI bus settings for reporting later */
-	if (hw->mac.ops.get_bus_info)
-		hw->mac.ops.get_bus_info(hw);
-
 	strcpy(netdev->name, "eth%d");
 
 	err = register_netdev(netdev);