net: phy: Add support for polling cable test

Some PHYs are not capable of generating interrupts when a cable test
finished. They do however support interrupts for normal operations,
like link up/down. As such, the PHY state machine would normally not
poll the PHY.

Add support for indicating the PHY state machine must poll the PHY
when performing a cable test.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/phy.c

@@ -523,6 +523,8 @@ int phy_start_cable_test(struct phy_device *phydev,
 
 	phydev->state = PHY_CABLETEST;
 
+	if (phy_polling_mode(phydev))
+		phy_trigger_machine(phydev);
 out:
 	mutex_unlock(&phydev->lock);
 

include/linux/phy.h

@@ -79,6 +79,7 @@ extern const int phy_10gbit_features_array[1];
 
 #define PHY_IS_INTERNAL		0x00000001
 #define PHY_RST_AFTER_CLK_EN	0x00000002
+#define PHY_POLL_CABLE_TEST	0x00000004
 #define MDIO_DEVICE_IS_PHY	0x80000000
 
 /* Interface Mode definitions */
@@ -1061,6 +1062,10 @@ static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
  */
 static inline bool phy_polling_mode(struct phy_device *phydev)
 {
+	if (phydev->state == PHY_CABLETEST)
+		if (phydev->drv->flags & PHY_POLL_CABLE_TEST)
+			return true;
+
 	return phydev->irq == PHY_POLL;
 }