mpt3sas: Eliminate dead sleep_flag code

With the exception of a single call to wait_for_doorbell_int(), all this
conditional sleeping code is dead. So delete it.
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpt3sas/mpt3sas_base.c

@@ -98,7 +98,7 @@ MODULE_PARM_DESC(mpt3sas_fwfault_debug,
 	" enable detection of firmware fault and halt firmware - (default=0)");
 
 static int
-_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc);
 
 /**
  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
@@ -218,8 +218,7 @@ _base_fault_reset_work(struct work_struct *work)
 	ioc->non_operational_loop = 0;
 
 	if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
-		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 		pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name,
 		    __func__, (rc == 0) ? "success" : "failed");
 		doorbell = mpt3sas_base_get_iocstate(ioc, 0);
@@ -2145,7 +2144,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 
 	_base_mask_interrupts(ioc);
 
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	r = _base_get_ioc_facts(ioc);
 	if (r)
 		goto out_fail;
 
@@ -3172,12 +3171,11 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 /**
  * _base_allocate_memory_pools - allocate start of day memory pools
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 success, anything else error
  */
 static int
-_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
+_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 {
 	struct mpt3sas_facts *facts;
 	u16 max_sge_elements;
@@ -3647,29 +3645,25 @@ mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
  * _base_wait_on_iocstate - waiting on a particular ioc state
  * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
-	int sleep_flag)
+_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout)
 {
 	u32 count, cntdn;
 	u32 current_state;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		current_state = mpt3sas_base_get_iocstate(ioc, 1);
 		if (current_state == ioc_state)
 			return 0;
 		if (count && current_state == MPI2_IOC_STATE_FAULT)
 			break;
-		if (sleep_flag == CAN_SLEEP)
+
 		usleep_range(1000, 1500);
-		else
-			udelay(500);
 		count++;
 	} while (--cntdn);
 
@@ -3681,24 +3675,22 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
  * a write to the doorbell)
  * @ioc: per adapter object
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  *
  * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
  */
 static int
-_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc);
 
 static int
-_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 cntdn, count;
 	u32 int_status;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
@@ -3707,9 +3699,34 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
 				ioc->name, __func__, count, timeout));
 			return 0;
 		}
-		if (sleep_flag == CAN_SLEEP)
+
 		usleep_range(1000, 1500);
-		else
+		count++;
+	} while (--cntdn);
+
+	pr_err(MPT3SAS_FMT
+		"%s: failed due to timeout count(%d), int_status(%x)!\n",
+		ioc->name, __func__, count, int_status);
+	return -EFAULT;
+}
+
+static int
+_base_spin_on_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	u32 cntdn, count;
+	u32 int_status;
+
+	count = 0;
+	cntdn = 2000 * timeout;
+	do {
+		int_status = readl(&ioc->chip->HostInterruptStatus);
+		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+			dhsprintk(ioc, pr_info(MPT3SAS_FMT
+				"%s: successful count(%d), timeout(%d)\n",
+				ioc->name, __func__, count, timeout));
+			return 0;
+		}
+
 		udelay(500);
 		count++;
 	} while (--cntdn);
@@ -3718,13 +3735,13 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
 		"%s: failed due to timeout count(%d), int_status(%x)!\n",
 		ioc->name, __func__, count, int_status);
 	return -EFAULT;
+
 }
 
 /**
  * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
  * @ioc: per adapter object
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  *
@@ -3732,15 +3749,14 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
  * doorbell.
  */
 static int
-_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 cntdn, count;
 	u32 int_status;
 	u32 doorbell;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
@@ -3758,10 +3774,7 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
 		} else if (int_status == 0xFFFFFFFF)
 			goto out;
 
-		if (sleep_flag == CAN_SLEEP)
 		usleep_range(1000, 1500);
-		else
-			udelay(500);
 		count++;
 	} while (--cntdn);
 
@@ -3776,20 +3789,18 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
  * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
  * @ioc: per adapter object
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  *
  */
 static int
-_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 cntdn, count;
 	u32 doorbell_reg;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		doorbell_reg = readl(&ioc->chip->Doorbell);
 		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
@@ -3798,10 +3809,8 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
 				ioc->name, __func__, count, timeout));
 			return 0;
 		}
-		if (sleep_flag == CAN_SLEEP)
+
 		usleep_range(1000, 1500);
-		else
-			udelay(500);
 		count++;
 	} while (--cntdn);
 
@@ -3816,13 +3825,11 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
  * @ioc: per adapter object
  * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
-	int sleep_flag)
+_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout)
 {
 	u32 ioc_state;
 	int r = 0;
@@ -3841,12 +3848,11 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
 
 	writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
 	    &ioc->chip->Doorbell);
-	if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
+	if ((_base_wait_for_doorbell_ack(ioc, 15))) {
 		r = -EFAULT;
 		goto out;
 	}
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
-	    timeout, sleep_flag);
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
 	if (ioc_state) {
 		pr_err(MPT3SAS_FMT
 			"%s: failed going to ready state (ioc_state=0x%x)\n",
@@ -3868,13 +3874,12 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
  * @reply_bytes: reply length
  * @reply: pointer to reply payload
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
 _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
-	u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
+	u32 *request, int reply_bytes, u16 *reply, int timeout)
 {
 	MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
 	int i;
@@ -3900,7 +3905,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	    ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
 	    &ioc->chip->Doorbell);
 
-	if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
+	if ((_base_spin_on_doorbell_int(ioc, 5))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake int failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3908,7 +3913,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	}
 	writel(0, &ioc->chip->HostInterruptStatus);
 
-	if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
+	if ((_base_wait_for_doorbell_ack(ioc, 5))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake ack failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3918,7 +3923,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	/* send message 32-bits at a time */
 	for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
 		writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
-		if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
+		if ((_base_wait_for_doorbell_ack(ioc, 5)))
 			failed = 1;
 	}
 
@@ -3930,7 +3935,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	}
 
 	/* now wait for the reply */
-	if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
+	if ((_base_wait_for_doorbell_int(ioc, timeout))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake int failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3941,7 +3946,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
 	    & MPI2_DOORBELL_DATA_MASK);
 	writel(0, &ioc->chip->HostInterruptStatus);
-	if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+	if ((_base_wait_for_doorbell_int(ioc, 5))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake int failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3952,7 +3957,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	writel(0, &ioc->chip->HostInterruptStatus);
 
 	for (i = 2; i < default_reply->MsgLength * 2; i++)  {
-		if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+		if ((_base_wait_for_doorbell_int(ioc, 5))) {
 			pr_err(MPT3SAS_FMT
 				"doorbell handshake int failed (line=%d)\n",
 				ioc->name, __LINE__);
@@ -3966,8 +3971,8 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 		writel(0, &ioc->chip->HostInterruptStatus);
 	}
 
-	_base_wait_for_doorbell_int(ioc, 5, sleep_flag);
-	if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
+	_base_wait_for_doorbell_int(ioc, 5);
+	if (_base_wait_for_doorbell_not_used(ioc, 5) != 0) {
 		dhsprintk(ioc, pr_info(MPT3SAS_FMT
 			"doorbell is in use (line=%d)\n", ioc->name, __LINE__));
 	}
@@ -4082,8 +4087,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
 	rc = -EFAULT;
  out:
@@ -4180,8 +4184,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
 	rc = -EFAULT;
  out:
@@ -4192,12 +4195,11 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 /**
  * _base_get_port_facts - obtain port facts reply and save in ioc
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
+_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port)
 {
 	Mpi2PortFactsRequest_t mpi_request;
 	Mpi2PortFactsReply_t mpi_reply;
@@ -4213,7 +4215,7 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
 	mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
 	mpi_request.PortNumber = port;
 	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
-	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
 
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
@@ -4236,13 +4238,11 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
  * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
  * @ioc: per adapter object
  * @timeout:
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 ioc_state;
 	int rc;
@@ -4276,8 +4276,7 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
 		goto issue_diag_reset;
 	}
 
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
-	    timeout, sleep_flag);
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
 	if (ioc_state) {
 		dfailprintk(ioc, printk(MPT3SAS_FMT
 		    "%s: failed going to ready state (ioc_state=0x%x)\n",
@@ -4286,19 +4285,18 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
 	}
 
  issue_diag_reset:
-	rc = _base_diag_reset(ioc, sleep_flag);
+	rc = _base_diag_reset(ioc);
 	return rc;
 }
 
 /**
  * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2IOCFactsRequest_t mpi_request;
 	Mpi2IOCFactsReply_t mpi_reply;
@@ -4308,7 +4306,7 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
 
-	r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
+	r = _base_wait_for_iocstate(ioc, 10);
 	if (r) {
 		dfailprintk(ioc, printk(MPT3SAS_FMT
 		    "%s: failed getting to correct state\n",
@@ -4320,7 +4318,7 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	memset(&mpi_request, 0, mpi_request_sz);
 	mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
 	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
-	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
 
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
@@ -4380,12 +4378,11 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 /**
  * _base_send_ioc_init - send ioc_init to firmware
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2IOCInitRequest_t mpi_request;
 	Mpi2IOCInitReply_t mpi_reply;
@@ -4468,8 +4465,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 
 	r = _base_handshake_req_reply_wait(ioc,
 	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
-	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
-	    sleep_flag);
+	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10);
 
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
@@ -4544,12 +4540,11 @@ mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 /**
  * _base_send_port_enable - send port_enable(discovery stuff) to firmware
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2PortEnableRequest_t *mpi_request;
 	Mpi2PortEnableReply_t *mpi_reply;
@@ -4726,12 +4721,11 @@ _base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
 /**
  * _base_event_notification - send event notification
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_event_notification(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2EventNotificationRequest_t *mpi_request;
 	unsigned long timeleft;
@@ -4816,19 +4810,18 @@ mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
 		return;
 
 	mutex_lock(&ioc->base_cmds.mutex);
-	_base_event_notification(ioc, CAN_SLEEP);
+	_base_event_notification(ioc);
 	mutex_unlock(&ioc->base_cmds.mutex);
 }
 
 /**
  * _base_diag_reset - the "big hammer" start of day reset
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 {
 	u32 host_diagnostic;
 	u32 ioc_state;
@@ -4856,10 +4849,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
 
 		/* wait 100 msec */
-		if (sleep_flag == CAN_SLEEP)
 		msleep(100);
-		else
-			mdelay(100);
 
 		if (count++ > 20)
 			goto out;
@@ -4879,10 +4869,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	     &ioc->chip->HostDiagnostic);
 
 	/*This delay allows the chip PCIe hardware time to finish reset tasks*/
-	if (sleep_flag == CAN_SLEEP)
 	msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
-	else
-		mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
 
 	/* Approximately 300 second max wait */
 	for (count = 0; count < (300000000 /
@@ -4895,13 +4882,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
 			break;
 
-		/* Wait to pass the second read delay window */
-		if (sleep_flag == CAN_SLEEP)
-			msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
-								/ 1000);
-		else
-			mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
-								/ 1000);
+		msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC / 1000);
 	}
 
 	if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
@@ -4930,8 +4911,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 
 	drsprintk(ioc, pr_info(MPT3SAS_FMT
 		"Wait for FW to go to the READY state\n", ioc->name));
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
-	    sleep_flag);
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20);
 	if (ioc_state) {
 		pr_err(MPT3SAS_FMT
 			"%s: failed going to ready state (ioc_state=0x%x)\n",
@@ -4950,14 +4930,12 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 /**
  * _base_make_ioc_ready - put controller in READY state
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  * @type: FORCE_BIG_HAMMER or SOFT_RESET
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
-	enum reset_type type)
+_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
 {
 	u32 ioc_state;
 	int rc;
@@ -4984,10 +4962,7 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 				    ioc->name, __func__, ioc_state);
 				return -EFAULT;
 			}
-			if (sleep_flag == CAN_SLEEP)
 			ssleep(1);
-			else
-				mdelay(1000);
 			ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
 		}
 	}
@@ -5013,24 +4988,23 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 
 	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
 		if (!(_base_send_ioc_reset(ioc,
-		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
+		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15))) {
 			return 0;
 	}
 
  issue_diag_reset:
-	rc = _base_diag_reset(ioc, CAN_SLEEP);
+	rc = _base_diag_reset(ioc);
 	return rc;
 }
 
 /**
  * _base_make_ioc_operational - put controller in OPERATIONAL state
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
 {
 	int r, i, index;
 	unsigned long	flags;
@@ -5149,7 +5123,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	}
  skip_init_reply_post_free_queue:
 
-	r = _base_send_ioc_init(ioc, sleep_flag);
+	r = _base_send_ioc_init(ioc);
 	if (r)
 		return r;
 
@@ -5175,14 +5149,12 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
  skip_init_reply_post_host_index:
 
 	_base_unmask_interrupts(ioc);
-	r = _base_event_notification(ioc, sleep_flag);
+	r = _base_event_notification(ioc);
 	if (r)
 		return r;
 
-	if (sleep_flag == CAN_SLEEP)
 	_base_static_config_pages(ioc);
 
-
 	if (ioc->is_driver_loading) {
 
 		if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
@@ -5200,7 +5172,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		return r; /* scan_start and scan_finished support */
 	}
 
-	r = _base_send_port_enable(ioc, sleep_flag);
+	r = _base_send_port_enable(ioc);
 	if (r)
 		return r;
 
@@ -5224,7 +5196,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 	if (ioc->chip_phys && ioc->chip) {
 		_base_mask_interrupts(ioc);
 		ioc->shost_recovery = 1;
-		_base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+		_base_make_ioc_ready(ioc, SOFT_RESET);
 		ioc->shost_recovery = 0;
 	}
 
@@ -5292,7 +5264,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	pci_set_drvdata(ioc->pdev, ioc->shost);
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	r = _base_get_ioc_facts(ioc);
 	if (r)
 		goto out_free_resources;
 
@@ -5326,7 +5298,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->build_sg_mpi = &_base_build_sg;
 	ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
 
-	r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+	r = _base_make_ioc_ready(ioc, SOFT_RESET);
 	if (r)
 		goto out_free_resources;
 
@@ -5338,12 +5310,12 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
-		r = _base_get_port_facts(ioc, i, CAN_SLEEP);
+		r = _base_get_port_facts(ioc, i);
 		if (r)
 			goto out_free_resources;
 	}
 
-	r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
+	r = _base_allocate_memory_pools(ioc);
 	if (r)
 		goto out_free_resources;
 
@@ -5429,7 +5401,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	if (ioc->hba_mpi_version_belonged == MPI26_VERSION)
 		_base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
 
-	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
+	r = _base_make_ioc_operational(ioc);
 	if (r)
 		goto out_free_resources;
 
@@ -5565,21 +5537,18 @@ _base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
 /**
  * _wait_for_commands_to_complete - reset controller
  * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * This function waiting(3s) for all pending commands to complete
  * prior to putting controller in reset.
  */
 static void
-_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
 {
 	u32 ioc_state;
 	unsigned long flags;
 	u16 i;
 
 	ioc->pending_io_count = 0;
-	if (sleep_flag != CAN_SLEEP)
-		return;
 
 	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
 	if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
@@ -5602,13 +5571,12 @@ _wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 /**
  * mpt3sas_base_hard_reset_handler - reset controller
  * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  * @type: FORCE_BIG_HAMMER or SOFT_RESET
  *
  * Returns 0 for success, non-zero for failure.
  */
 int
-mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
 	enum reset_type type)
 {
 	int r;
@@ -5629,13 +5597,6 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 	if (mpt3sas_fwfault_debug)
 		mpt3sas_halt_firmware(ioc);
 
-	/* TODO - What we really should be doing is pulling
-	 * out all the code associated with NO_SLEEP; its never used.
-	 * That is legacy code from mpt fusion driver, ported over.
-	 * I will leave this BUG_ON here for now till its been resolved.
-	 */
-	BUG_ON(sleep_flag == NO_SLEEP);
-
 	/* wait for an active reset in progress to complete */
 	if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
 		do {
@@ -5660,9 +5621,9 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 			is_fault = 1;
 	}
 	_base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
-	_wait_for_commands_to_complete(ioc, sleep_flag);
+	_wait_for_commands_to_complete(ioc);
 	_base_mask_interrupts(ioc);
-	r = _base_make_ioc_ready(ioc, sleep_flag, type);
+	r = _base_make_ioc_ready(ioc, type);
 	if (r)
 		goto out;
 	_base_reset_handler(ioc, MPT3_IOC_AFTER_RESET);
@@ -5675,7 +5636,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 		r = -EFAULT;
 		goto out;
 	}
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	r = _base_get_ioc_facts(ioc);
 	if (r)
 		goto out;
 
@@ -5684,7 +5645,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 		      "Please reboot the system and ensure that the correct"
 		      " firmware version is running\n", ioc->name);
 
-	r = _base_make_ioc_operational(ioc, sleep_flag);
+	r = _base_make_ioc_operational(ioc);
 	if (!r)
 		_base_reset_handler(ioc, MPT3_IOC_DONE_RESET);
 

drivers/scsi/mpt3sas/mpt3sas_base.h

@@ -119,10 +119,6 @@
 
 #define MPT_MAX_CALLBACKS		32
 
-
-#define	 CAN_SLEEP			1
-#define  NO_SLEEP			0
-
 #define INTERNAL_CMDS_COUNT		10	/* reserved cmds */
 /* reserved for issuing internally framed scsi io cmds */
 #define INTERNAL_SCSIIO_CMDS_COUNT	3
@@ -1219,7 +1215,7 @@ int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc);
 int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc);
-int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
 	enum reset_type type);
 
 void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid);

drivers/scsi/mpt3sas/mpt3sas_config.c

@@ -491,8 +491,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	mutex_unlock(&ioc->config_cmds.mutex);
 
 	if (issue_host_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	return r;
 }
 

drivers/scsi/mpt3sas/mpt3sas_ctl.c

@@ -1005,8 +1005,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 			    le16_to_cpu(mpi_request->FunctionDependent1), 0, 0,
 			    0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30);
 		} else
-			mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-			    FORCE_BIG_HAMMER);
+			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	}
 
  out:
@@ -1219,8 +1218,7 @@ _ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
 	    __func__));
 
-	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
+	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	pr_info(MPT3SAS_FMT "host reset: %s\n",
 	    ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
 	return 0;
@@ -1537,8 +1535,7 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
  out:
 
@@ -1973,8 +1970,7 @@ _ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 	rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset);
 
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
 	return rc;
 }
@@ -2154,8 +2150,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
  out:
 

drivers/scsi/mpt3sas/mpt3sas_scsih.c

@@ -2241,16 +2241,14 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
 	if (ioc_state & MPI2_DOORBELL_USED) {
 		dhsprintk(ioc, pr_info(MPT3SAS_FMT
 			"unexpected doorbell active!\n", ioc->name));
-		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 		return (!rc) ? SUCCESS : FAILED;
 	}
 
 	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
 		mpt3sas_base_fault_info(ioc, ioc_state &
 		    MPI2_DOORBELL_DATA_MASK);
-		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 		return (!rc) ? SUCCESS : FAILED;
 	}
 
@@ -2292,7 +2290,7 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
 		if (!(ioc->tm_cmds.status & MPT3_CMD_RESET)) {
-			rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+			rc = mpt3sas_base_hard_reset_handler(ioc,
 					FORCE_BIG_HAMMER);
 			rc = (!rc) ? SUCCESS : FAILED;
 			goto out;
@@ -2638,8 +2636,7 @@ scsih_host_reset(struct scsi_cmnd *scmd)
 		goto out;
 	}
 
-	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
+	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	r = (retval < 0) ? FAILED : SUCCESS;
 out:
 	pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
@@ -6295,8 +6292,7 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
 	mutex_unlock(&ioc->scsih_cmds.mutex);
 
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	return rc;
 }
 
@@ -8914,7 +8910,7 @@ scsih_resume(struct pci_dev *pdev)
 	if (r)
 		return r;
 
-	mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
+	mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET);
 	scsi_unblock_requests(shost);
 	mpt3sas_base_start_watchdog(ioc);
 	return 0;
@@ -8985,8 +8981,7 @@ scsih_pci_slot_reset(struct pci_dev *pdev)
 	if (rc)
 		return PCI_ERS_RESULT_DISCONNECT;
 
-	rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
+	rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
 	pr_warn(MPT3SAS_FMT "hard reset: %s\n", ioc->name,
 	    (rc == 0) ? "success" : "failed");

drivers/scsi/mpt3sas/mpt3sas_transport.c

@@ -446,8 +446,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
  out:
 	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
 	if (data_out)
@@ -1253,8 +1252,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
  out:
 	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
 	if (data_out)
@@ -1564,8 +1562,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
  out:
 	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
 	if (data_out)
@@ -2103,8 +2100,7 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
  issue_host_reset:
 	if (issue_reset) {
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 		rc = -ETIMEDOUT;
 	}