Merge tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support
   - Add support for Power Supply to AXP813
   - Add support for GPIO, ADC, AC and Battery Power Supply to AXP803
   - Add support for UART to Exynos LPASS

  Fix-ups:
   - Use supplied MACROS; ti_am335x_tscadc
   - Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp
   - Regmap changes; bd9571mwv, wm5110-tables
   - Kconfig dependencies; MFD_AT91_USART
   - Supply shared data for child-devices; madera-core
   - Use new of_node_name_eq() API call; max77620, stmpe
   - Use managed resources (devm_*); tps65218
   - Comment descriptions; ingenic-tcu
   - Coding style; madera-core

  Bug Fixes:
   - Fix section mismatches; twl-core, db8500-prcmu
   - Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core
   - IRQ related fixes; tps6586x
   - Ensure proper initialisation sequence; qcom_rpm
   - Repair potential memory leak; cros_ec_dev"

* tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
  mfd: exynos-lpass: Enable UART module support
  mfd: mc13xxx: Fix a missing check of a register-read failure
  mfd: cros_ec: Add commands to control codec
  mfd: madera: Remove spurious semicolon in while loop
  mfd: rave-sp: Fix typo in rave_sp_checksum comment
  mfd: ingenic-tcu: Fix bit field description in header
  mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
  mfd: Use of_node_name_eq() for node name comparisons
  mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
  mfd: axp20x: Add supported cells for AXP803
  mfd: axp20x: Re-align MFD cell entries
  mfd: axp20x: Add AC power supply cell for AXP813
  mfd: wm5110: Add missing ASRC rate register
  mfd: qcom_rpm: write fw_version to CTRL_REG
  mfd: tps6586x: Handle interrupts on suspend
  mfd: madera: Add shared data for accessory detection
  mfd: at91-usart: Add platform dependency
  mfd: bd9571mwv: Add volatile register to make DVFS work
  mfd: ab8500-core: Return zero in get_register_interruptible()
  mfd: tmio: Typo s/use use/use/
  ...

drivers/iio/adc/ti_am335x_adc.c

@@ -142,7 +142,10 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 			stepconfig |= STEPCONFIG_MODE_SWCNT;
 
 		tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
-				stepconfig | STEPCONFIG_INP(chan));
+				stepconfig | STEPCONFIG_INP(chan) |
+				STEPCONFIG_INM_ADCREFM |
+				STEPCONFIG_RFP_VREFP |
+				STEPCONFIG_RFM_VREFN);
 
 		if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) {
 			dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",

drivers/mfd/Kconfig

@@ -102,6 +102,7 @@ config MFD_AAT2870_CORE
 config MFD_AT91_USART
 	tristate "AT91 USART Driver"
 	select MFD_CORE
+	depends on ARCH_AT91 || COMPILE_TEST
 	help
 	  Select this to get support for AT91 USART IP. This is a wrapper
 	  over at91-usart-serial driver and usart-spi-driver. Only one function

drivers/mfd/ab8500-core.c

@@ -261,7 +261,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	mutex_unlock(&ab8500->lock);
 	dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
 
-	return ret;
+	return (ret < 0) ? ret : 0;
 }
 
 static int ab8500_get_register(struct device *dev, u8 bank,

drivers/mfd/axp20x.c

@@ -701,28 +701,23 @@ static const struct mfd_cell axp288_cells[] = {
 		.name		= "axp288_adc",
 		.num_resources	= ARRAY_SIZE(axp288_adc_resources),
 		.resources	= axp288_adc_resources,
-	},
-	{
+	}, {
 		.name		= "axp288_extcon",
 		.num_resources	= ARRAY_SIZE(axp288_extcon_resources),
 		.resources	= axp288_extcon_resources,
-	},
-	{
+	}, {
 		.name		= "axp288_charger",
 		.num_resources	= ARRAY_SIZE(axp288_charger_resources),
 		.resources	= axp288_charger_resources,
-	},
-	{
+	}, {
 		.name		= "axp288_fuel_gauge",
 		.num_resources	= ARRAY_SIZE(axp288_fuel_gauge_resources),
 		.resources	= axp288_fuel_gauge_resources,
-	},
-	{
+	}, {
 		.name		= "axp221-pek",
 		.num_resources	= ARRAY_SIZE(axp288_power_button_resources),
 		.resources	= axp288_power_button_resources,
-	},
-	{
+	}, {
 		.name		= "axp288_pmic_acpi",
 	},
 };
@@ -732,6 +727,20 @@ static const struct mfd_cell axp803_cells[] = {
 		.name		= "axp221-pek",
 		.num_resources	= ARRAY_SIZE(axp803_pek_resources),
 		.resources	= axp803_pek_resources,
+	}, {
+		.name		= "axp20x-gpio",
+		.of_compatible	= "x-powers,axp813-gpio",
+	}, {
+		.name		= "axp813-adc",
+		.of_compatible	= "x-powers,axp813-adc",
+	}, {
+		.name		= "axp20x-battery-power-supply",
+		.of_compatible	= "x-powers,axp813-battery-power-supply",
+	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp813-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
+		.resources	= axp20x_ac_power_supply_resources,
 	},
 	{	.name		= "axp20x-regulator" },
 };
@@ -779,6 +788,11 @@ static const struct mfd_cell axp813_cells[] = {
 	}, {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp813-battery-power-supply",
+	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp813-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
+		.resources	= axp20x_ac_power_supply_resources,
 	},
 };
 

drivers/mfd/bd9571mwv.c

@@ -59,6 +59,7 @@ static const struct regmap_access_table bd9571mwv_writable_table = {
 };
 
 static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = {
+	regmap_reg_range(BD9571MWV_DVFS_MONIVDAC, BD9571MWV_DVFS_MONIVDAC),
 	regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
 	regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
 	regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),

drivers/mfd/cros_ec_dev.c

@@ -499,6 +499,7 @@ static int ec_device_remove(struct platform_device *pdev)
 
 	cros_ec_debugfs_remove(ec);
 
+	mfd_remove_devices(ec->dev);
 	cdev_del(&ec->cdev);
 	device_unregister(&ec->class_dev);
 	return 0;

drivers/mfd/db8500-prcmu.c

@@ -2584,7 +2584,7 @@ static struct irq_chip prcmu_irq_chip = {
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-static __init char *fw_project_name(u32 project)
+static char *fw_project_name(u32 project)
 {
 	switch (project) {
 	case PRCMU_FW_PROJECT_U8500:
@@ -2732,7 +2732,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
 	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
 }
 
-static void __init init_prcm_registers(void)
+static void init_prcm_registers(void)
 {
 	u32 val;
 

drivers/mfd/exynos-lpass.c

@@ -82,11 +82,13 @@ static void exynos_lpass_enable(struct exynos_lpass *lpass)
 		     LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);
 
 	regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK,
-		     LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);
+		     LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S |
+		     LPASS_INTR_UART);
 
 	exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
 	exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);
 	exynos_lpass_core_sw_reset(lpass, LPASS_MEM_SW_RESET);
+	exynos_lpass_core_sw_reset(lpass, LPASS_UART_SW_RESET);
 }
 
 static void exynos_lpass_disable(struct exynos_lpass *lpass)

drivers/mfd/madera-core.c

@@ -15,6 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/mfd/core.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/notifier.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
@@ -155,7 +156,7 @@ static int madera_wait_for_boot(struct madera *madera)
 		usleep_range(MADERA_BOOT_POLL_INTERVAL_USEC / 2,
 			     MADERA_BOOT_POLL_INTERVAL_USEC);
 		regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val);
-	};
+	}
 
 	if (!(val & MADERA_BOOT_DONE_STS1)) {
 		dev_err(madera->dev, "Polling BOOT_DONE_STS timed out\n");
@@ -357,6 +358,8 @@ int madera_dev_init(struct madera *madera)
 
 	dev_set_drvdata(madera->dev, madera);
 	BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
+	mutex_init(&madera->dapm_ptr_lock);
+
 	madera_set_micbias_info(madera);
 
 	/*

drivers/mfd/max77620.c

@@ -280,7 +280,7 @@ static int max77620_config_fps(struct max77620_chip *chip,
 
 	for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
 		sprintf(fps_name, "fps%d", fps_id);
-		if (!strcmp(fps_np->name, fps_name))
+		if (of_node_name_eq(fps_np, fps_name))
 			break;
 	}
 

drivers/mfd/mc13xxx-core.c

@@ -274,7 +274,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 
 	mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
 
-	mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	ret = mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	if (ret)
+		goto out;
 
 	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2 |
 	       MC13XXX_ADC0_CHRGRAWDIV;

drivers/mfd/mt6397-core.c

@@ -329,8 +329,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 	default:
 		dev_err(&pdev->dev, "unsupported chip: %d\n", id);
-		ret = -ENODEV;
-		break;
+		return -ENODEV;
 	}
 
 	if (ret) {

drivers/mfd/qcom_rpm.c

@@ -638,6 +638,10 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 		return -EFAULT;
 	}
 
+	writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
+	writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
+	writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
+
 	dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
 							fw_version[1],
 							fw_version[2]);

drivers/mfd/rave-sp.c

@@ -109,7 +109,7 @@ struct rave_sp_reply {
 /**
  * struct rave_sp_checksum - Variant specific checksum implementation details
  *
- * @length:	Caculated checksum length
+ * @length:	Calculated checksum length
  * @subroutine:	Utilized checksum algorithm implementation
  */
 struct rave_sp_checksum {

drivers/mfd/stmpe.c

@@ -1302,17 +1302,17 @@ static void stmpe_of_probe(struct stmpe_platform_data *pdata,
 	pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
 
 	for_each_child_of_node(np, child) {
-		if (!strcmp(child->name, "stmpe_gpio")) {
+		if (of_node_name_eq(child, "stmpe_gpio")) {
 			pdata->blocks |= STMPE_BLOCK_GPIO;
-		} else if (!strcmp(child->name, "stmpe_keypad")) {
+		} else if (of_node_name_eq(child, "stmpe_keypad")) {
 			pdata->blocks |= STMPE_BLOCK_KEYPAD;
-		} else if (!strcmp(child->name, "stmpe_touchscreen")) {
+		} else if (of_node_name_eq(child, "stmpe_touchscreen")) {
 			pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
-		} else if (!strcmp(child->name, "stmpe_adc")) {
+		} else if (of_node_name_eq(child, "stmpe_adc")) {
 			pdata->blocks |= STMPE_BLOCK_ADC;
-		} else if (!strcmp(child->name, "stmpe_pwm")) {
+		} else if (of_node_name_eq(child, "stmpe_pwm")) {
 			pdata->blocks |= STMPE_BLOCK_PWM;
-		} else if (!strcmp(child->name, "stmpe_rotator")) {
+		} else if (of_node_name_eq(child, "stmpe_rotator")) {
 			pdata->blocks |= STMPE_BLOCK_ROTATOR;
 		}
 	}

drivers/mfd/ti_am335x_tscadc.c

@@ -264,8 +264,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		cell->pdata_size = sizeof(tscadc);
 	}
 
-	err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
-			tscadc->used_cells, NULL, 0, NULL);
+	err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+			      tscadc->cells, tscadc->used_cells, NULL,
+			      0, NULL);
 	if (err < 0)
 		goto err_disable_clk;
 

drivers/mfd/tps65218.c

@@ -235,7 +235,7 @@ static int tps65218_probe(struct i2c_client *client,
 
 	mutex_init(&tps->tps_lock);
 
-	ret = regmap_add_irq_chip(tps->regmap, tps->irq,
+	ret = devm_regmap_add_irq_chip(&client->dev, tps->regmap, tps->irq,
 				       IRQF_ONESHOT, 0, &tps65218_irq_chip,
 				       &tps->irq_data);
 	if (ret < 0)
@@ -253,26 +253,9 @@ static int tps65218_probe(struct i2c_client *client,
 			      ARRAY_SIZE(tps65218_cells), NULL, 0,
 			      regmap_irq_get_domain(tps->irq_data));
 
-	if (ret < 0)
-		goto err_irq;
-
-	return 0;
-
-err_irq:
-	regmap_del_irq_chip(tps->irq, tps->irq_data);
-
 	return ret;
 }
 
-static int tps65218_remove(struct i2c_client *client)
-{
-	struct tps65218 *tps = i2c_get_clientdata(client);
-
-	regmap_del_irq_chip(tps->irq, tps->irq_data);
-
-	return 0;
-}
-
 static const struct i2c_device_id tps65218_id_table[] = {
 	{ "tps65218", TPS65218 },
 	{ },
@@ -285,7 +268,6 @@ static struct i2c_driver tps65218_driver = {
 		.of_match_table = of_tps65218_match_table,
 	},
 	.probe		= tps65218_probe,
-	.remove		= tps65218_remove,
 	.id_table       = tps65218_id_table,
 };
 

drivers/mfd/tps6586x.c

@@ -592,6 +592,29 @@ static int tps6586x_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
+static int __maybe_unused tps6586x_i2c_suspend(struct device *dev)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+
+	if (tps6586x->client->irq)
+		disable_irq(tps6586x->client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused tps6586x_i2c_resume(struct device *dev)
+{
+	struct tps6586x *tps6586x = dev_get_drvdata(dev);
+
+	if (tps6586x->client->irq)
+		enable_irq(tps6586x->client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tps6586x_pm_ops, tps6586x_i2c_suspend,
+			 tps6586x_i2c_resume);
+
 static const struct i2c_device_id tps6586x_id_table[] = {
 	{ "tps6586x", 0 },
 	{ },
@@ -602,6 +625,7 @@ static struct i2c_driver tps6586x_driver = {
 	.driver	= {
 		.name	= "tps6586x",
 		.of_match_table = of_match_ptr(tps6586x_of_match),
+		.pm	= &tps6586x_pm_ops,
 	},
 	.probe		= tps6586x_i2c_probe,
 	.remove		= tps6586x_i2c_remove,

drivers/mfd/twl-core.c

@@ -979,7 +979,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
  * letting it generate the right frequencies for USB, MADC, and
  * other purposes.
  */
-static inline int __init protect_pm_master(void)
+static inline int protect_pm_master(void)
 {
 	int e = 0;
 
@@ -988,7 +988,7 @@ static inline int __init protect_pm_master(void)
 	return e;
 }
 
-static inline int __init unprotect_pm_master(void)
+static inline int unprotect_pm_master(void)
 {
 	int e = 0;
 

drivers/mfd/wm5110-tables.c

@@ -1618,6 +1618,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000ECD, 0x0000 },    /* R3789  - HPLPF4_2 */
 	{ 0x00000EE0, 0x0000 },    /* R3808  - ASRC_ENABLE */
 	{ 0x00000EE2, 0x0000 },    /* R3810  - ASRC_RATE1 */
+	{ 0x00000EE3, 0x4000 },    /* R3811  - ASRC_RATE2 */
 	{ 0x00000EF0, 0x0000 },    /* R3824  - ISRC 1 CTRL 1 */
 	{ 0x00000EF1, 0x0000 },    /* R3825  - ISRC 1 CTRL 2 */
 	{ 0x00000EF2, 0x0000 },    /* R3826  - ISRC 1 CTRL 3 */
@@ -2869,6 +2870,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASRC_ENABLE:
 	case ARIZONA_ASRC_STATUS:
 	case ARIZONA_ASRC_RATE1:
+	case ARIZONA_ASRC_RATE2:
 	case ARIZONA_ISRC_1_CTRL_1:
 	case ARIZONA_ISRC_1_CTRL_2:
 	case ARIZONA_ISRC_1_CTRL_3:

include/linux/mfd/cros_ec_commands.h

@@ -2790,6 +2790,100 @@ struct ec_response_battery_vendor_param {
 	uint32_t value;
 } __packed;
 
+/*****************************************************************************/
+/* Commands for I2S recording on audio codec. */
+
+#define EC_CMD_CODEC_I2S 0x00BC
+
+enum ec_codec_i2s_subcmd {
+	EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
+	EC_CODEC_SET_GAIN = 0x1,
+	EC_CODEC_GET_GAIN = 0x2,
+	EC_CODEC_I2S_ENABLE = 0x3,
+	EC_CODEC_I2S_SET_CONFIG = 0x4,
+	EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
+	EC_CODEC_I2S_SET_BCLK = 0x6,
+};
+
+enum ec_sample_depth_value {
+	EC_CODEC_SAMPLE_DEPTH_16 = 0,
+	EC_CODEC_SAMPLE_DEPTH_24 = 1,
+};
+
+enum ec_i2s_config {
+	EC_DAI_FMT_I2S = 0,
+	EC_DAI_FMT_RIGHT_J = 1,
+	EC_DAI_FMT_LEFT_J = 2,
+	EC_DAI_FMT_PCM_A = 3,
+	EC_DAI_FMT_PCM_B = 4,
+	EC_DAI_FMT_PCM_TDM = 5,
+};
+
+struct ec_param_codec_i2s {
+	/*
+	 * enum ec_codec_i2s_subcmd
+	 */
+	uint8_t cmd;
+	union {
+		/*
+		 * EC_CODEC_SET_SAMPLE_DEPTH
+		 * Value should be one of ec_sample_depth_value.
+		 */
+		uint8_t depth;
+
+		/*
+		 * EC_CODEC_SET_GAIN
+		 * Value should be 0~43 for both channels.
+		 */
+		struct ec_param_codec_i2s_set_gain {
+			uint8_t left;
+			uint8_t right;
+		} __packed gain;
+
+		/*
+		 * EC_CODEC_I2S_ENABLE
+		 * 1 to enable, 0 to disable.
+		 */
+		uint8_t i2s_enable;
+
+		/*
+		 * EC_CODEC_I2S_SET_COFNIG
+		 * Value should be one of ec_i2s_config.
+		 */
+		uint8_t i2s_config;
+
+		/*
+		 * EC_CODEC_I2S_SET_TDM_CONFIG
+		 * Value should be one of ec_i2s_config.
+		 */
+		struct ec_param_codec_i2s_tdm {
+			/*
+			 * 0 to 496
+			 */
+			int16_t ch0_delay;
+			/*
+			 * -1 to 496
+			 */
+			int16_t ch1_delay;
+			uint8_t adjacent_to_ch0;
+			uint8_t adjacent_to_ch1;
+		} __packed tdm_param;
+
+		/*
+		 * EC_CODEC_I2S_SET_BCLK
+		 */
+		uint32_t bclk;
+	};
+} __packed;
+
+/*
+ * For subcommand EC_CODEC_GET_GAIN.
+ */
+struct ec_response_codec_gain {
+	uint8_t left;
+	uint8_t right;
+} __packed;
+
 /*****************************************************************************/
 /* System commands */
 

include/linux/mfd/ingenic-tcu.h

@@ -41,7 +41,7 @@
 #define TCU_TCSR_PRESCALE_LSB		3
 #define TCU_TCSR_PRESCALE_MASK		0x38
 
-#define TCU_TCSR_PWM_SD		BIT(9)	/* 0: Shutdown abruptly 1: gracefully */
+#define TCU_TCSR_PWM_SD		BIT(9)	/* 0: Shutdown gracefully 1: abruptly */
 #define TCU_TCSR_PWM_INITL_HIGH	BIT(8)	/* Sets the initial output level */
 #define TCU_TCSR_PWM_EN		BIT(7)	/* PWM pin output enable */
 

include/linux/mfd/madera/core.h

@@ -15,6 +15,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/madera/pdata.h>
+#include <linux/mutex.h>
 #include <linux/notifier.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -37,6 +38,8 @@ enum madera_type {
 
 #define MADERA_MAX_MICBIAS		4
 
+#define MADERA_MAX_HP_OUTPUT		3
+
 /* Notifier events */
 #define MADERA_NOTIFY_VOICE_TRIGGER	0x1
 #define MADERA_NOTIFY_HPDET		0x2
@@ -183,6 +186,10 @@ struct madera {
 	unsigned int num_childbias[MADERA_MAX_MICBIAS];
 
 	struct snd_soc_dapm_context *dapm;
+	struct mutex dapm_ptr_lock;
+	unsigned int hp_ena;
+	bool out_clamp[MADERA_MAX_HP_OUTPUT];
+	bool out_shorted[MADERA_MAX_HP_OUTPUT];
 
 	struct blocking_notifier_head notifier;
 };

include/linux/mfd/ti_am335x_tscadc.h

@@ -78,6 +78,8 @@
 #define STEPCONFIG_YNN		BIT(8)
 #define STEPCONFIG_XNP		BIT(9)
 #define STEPCONFIG_YPN		BIT(10)
+#define STEPCONFIG_RFP(val)	((val) << 12)
+#define STEPCONFIG_RFP_VREFP	(0x3 << 12)
 #define STEPCONFIG_INM_MASK	(0xF << 15)
 #define STEPCONFIG_INM(val)	((val) << 15)
 #define STEPCONFIG_INM_ADCREFM	STEPCONFIG_INM(8)
@@ -86,6 +88,8 @@
 #define STEPCONFIG_INP_AN4	STEPCONFIG_INP(4)
 #define STEPCONFIG_INP_ADCREFM	STEPCONFIG_INP(8)
 #define STEPCONFIG_FIFO1	BIT(26)
+#define STEPCONFIG_RFM(val)	((val) << 23)
+#define STEPCONFIG_RFM_VREFN	(0x3 << 23)
 
 /* Delay register */
 #define STEPDELAY_OPEN_MASK	(0x3FFFF << 0)

include/linux/mfd/tmio.h

@@ -79,7 +79,7 @@
 /* Some controllers have a CBSY bit */
 #define TMIO_MMC_HAVE_CBSY		BIT(11)
 
-/* Some controllers that support HS400 use use 4 taps while others use 8. */
+/* Some controllers that support HS400 use 4 taps while others use 8. */
 #define TMIO_MMC_HAVE_4TAP_HS400	BIT(13)
 
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);