Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md

Pull md updates from Shaohua Li:
 "Mainly fixes bugs and improves performance:

   - Improve scalability for raid1 from Coly

   - Improve raid5-cache read performance, disk efficiency and IO
     pattern from Song and me

   - Fix a race condition of disk hotplug for linear from Coly

   - A few cleanup patches from Ming and Byungchul

   - Fix a memory leak from Neil

   - Fix WRITE SAME IO failure from me

   - Add doc for raid5-cache from me"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (23 commits)
  md/raid1: fix write behind issues introduced by bio_clone_bioset_partial
  md/raid1: handle flush request correctly
  md/linear: shutup lockdep warnning
  md/raid1: fix a use-after-free bug
  RAID1: avoid unnecessary spin locks in I/O barrier code
  RAID1: a new I/O barrier implementation to remove resync window
  md/raid5: Don't reinvent the wheel but use existing llist API
  md: fast clone bio in bio_clone_mddev()
  md: remove unnecessary check on mddev
  md/raid1: use bio_clone_bioset_partial() in case of write behind
  md: fail if mddev->bio_set can't be created
  block: introduce bio_clone_bioset_partial()
  md: disable WRITE SAME if it fails in underlayer disks
  md/raid5-cache: exclude reclaiming stripes in reclaim check
  md/raid5-cache: stripe reclaim only counts valid stripes
  MD: add doc for raid5-cache
  Documentation: move MD related doc into a separate dir
  md: ensure md devices are freed before module is unloaded.
  md/r5cache: improve journal device efficiency
  md/r5cache: enable chunk_aligned_read with write back cache
  ...

Documentation/00-INDEX

@@ -270,8 +270,8 @@ m68k/
 	- directory with info about Linux on Motorola 68k architecture.
 mailbox.txt
 	- How to write drivers for the common mailbox framework (IPC).
-md-cluster.txt
-	- info on shared-device RAID MD cluster.
+md/
+	- directory with info about Linux Software RAID
 media/
 	- info on media drivers: uAPI, kAPI and driver documentation.
 memory-barriers.txt

Documentation/admin-guide/md.rst

@@ -725,3 +725,8 @@ These currently include:
       to 1.  Setting this to 0 disables bypass accounting and
       requires preread stripes to wait until all full-width stripe-
       writes are complete.  Valid values are 0 to stripe_cache_size.
+
+  journal_mode (currently raid5 only)
+      The cache mode for raid5. raid5 could include an extra disk for
+      caching. The mode can be "write-throuth" and "write-back". The
+      default is "write-through".

Documentation/md/raid5-cache.txt

+RAID5 cache
+
+Raid 4/5/6 could include an extra disk for data cache besides normal RAID
+disks. The role of RAID disks isn't changed with the cache disk. The cache disk
+caches data to the RAID disks. The cache can be in write-through (supported
+since 4.4) or write-back mode (supported since 4.10). mdadm (supported since
+3.4) has a new option '--write-journal' to create array with cache. Please
+refer to mdadm manual for details. By default (RAID array starts), the cache is
+in write-through mode. A user can switch it to write-back mode by:
+
+echo "write-back" > /sys/block/md0/md/journal_mode
+
+And switch it back to write-through mode by:
+
+echo "write-through" > /sys/block/md0/md/journal_mode
+
+In both modes, all writes to the array will hit cache disk first. This means
+the cache disk must be fast and sustainable.
+
+-------------------------------------
+write-through mode:
+
+This mode mainly fixes the 'write hole' issue. For RAID 4/5/6 array, an unclean
+shutdown can cause data in some stripes to not be in consistent state, eg, data
+and parity don't match. The reason is that a stripe write involves several RAID
+disks and it's possible the writes don't hit all RAID disks yet before the
+unclean shutdown. We call an array degraded if it has inconsistent data. MD
+tries to resync the array to bring it back to normal state. But before the
+resync completes, any system crash will expose the chance of real data
+corruption in the RAID array. This problem is called 'write hole'.
+
+The write-through cache will cache all data on cache disk first. After the data
+is safe on the cache disk, the data will be flushed onto RAID disks. The
+two-step write will guarantee MD can recover correct data after unclean
+shutdown even the array is degraded. Thus the cache can close the 'write hole'.
+
+In write-through mode, MD reports IO completion to upper layer (usually
+filesystems) after the data is safe on RAID disks, so cache disk failure
+doesn't cause data loss. Of course cache disk failure means the array is
+exposed to 'write hole' again.
+
+In write-through mode, the cache disk isn't required to be big. Several
+hundreds megabytes are enough.
+
+--------------------------------------
+write-back mode:
+
+write-back mode fixes the 'write hole' issue too, since all write data is
+cached on cache disk. But the main goal of 'write-back' cache is to speed up
+write. If a write crosses all RAID disks of a stripe, we call it full-stripe
+write. For non-full-stripe writes, MD must read old data before the new parity
+can be calculated. These synchronous reads hurt write throughput. Some writes
+which are sequential but not dispatched in the same time will suffer from this
+overhead too. Write-back cache will aggregate the data and flush the data to
+RAID disks only after the data becomes a full stripe write. This will
+completely avoid the overhead, so it's very helpful for some workloads. A
+typical workload which does sequential write followed by fsync is an example.
+
+In write-back mode, MD reports IO completion to upper layer (usually
+filesystems) right after the data hits cache disk. The data is flushed to raid
+disks later after specific conditions met. So cache disk failure will cause
+data loss.
+
+In write-back mode, MD also caches data in memory. The memory cache includes
+the same data stored on cache disk, so a power loss doesn't cause data loss.
+The memory cache size has performance impact for the array. It's recommended
+the size is big. A user can configure the size by:
+
+echo "2048" > /sys/block/md0/md/stripe_cache_size
+
+Too small cache disk will make the write aggregation less efficient in this
+mode depending on the workloads. It's recommended to use a cache disk with at
+least several gigabytes size in write-back mode.
+
+--------------------------------------
+The implementation:
+
+The write-through and write-back cache use the same disk format. The cache disk
+is organized as a simple write log. The log consists of 'meta data' and 'data'
+pairs. The meta data describes the data. It also includes checksum and sequence
+ID for recovery identification. Data can be IO data and parity data. Data is
+checksumed too. The checksum is stored in the meta data ahead of the data. The
+checksum is an optimization because MD can write meta and data freely without
+worry about the order. MD superblock has a field pointed to the valid meta data
+of log head.
+
+The log implementation is pretty straightforward. The difficult part is the
+order in which MD writes data to cache disk and RAID disks. Specifically, in
+write-through mode, MD calculates parity for IO data, writes both IO data and
+parity to the log, writes the data and parity to RAID disks after the data and
+parity is settled down in log and finally the IO is finished. Read just reads
+from raid disks as usual.
+
+In write-back mode, MD writes IO data to the log and reports IO completion. The
+data is also fully cached in memory at that time, which means read must query
+memory cache. If some conditions are met, MD will flush the data to RAID disks.
+MD will calculate parity for the data and write parity into the log. After this
+is finished, MD will write both data and parity into RAID disks, then MD can
+release the memory cache. The flush conditions could be stripe becomes a full
+stripe write, free cache disk space is low or free in-kernel memory cache space
+is low.
+
+After an unclean shutdown, MD does recovery. MD reads all meta data and data
+from the log. The sequence ID and checksum will help us detect corrupted meta
+data and data. If MD finds a stripe with data and valid parities (1 parity for
+raid4/5 and 2 for raid6), MD will write the data and parities to RAID disks. If
+parities are incompleted, they are discarded. If part of data is corrupted,
+they are discarded too. MD then loads valid data and writes them to RAID disks
+in normal way.

block/bio.c

@@ -625,21 +625,20 @@ struct bio *bio_clone_fast(struct bio *bio, gfp_t gfp_mask, struct bio_set *bs)
 }
 EXPORT_SYMBOL(bio_clone_fast);
 
-/**
- * 	bio_clone_bioset - clone a bio
- * 	@bio_src: bio to clone
- *	@gfp_mask: allocation priority
- *	@bs: bio_set to allocate from
- *
- *	Clone bio. Caller will own the returned bio, but not the actual data it
- *	points to. Reference count of returned bio will be one.
- */
-struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
-			     struct bio_set *bs)
+static struct bio *__bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
+				      struct bio_set *bs, int offset,
+				      int size)
 {
 	struct bvec_iter iter;
 	struct bio_vec bv;
 	struct bio *bio;
+	struct bvec_iter iter_src = bio_src->bi_iter;
+
+	/* for supporting partial clone */
+	if (offset || size != bio_src->bi_iter.bi_size) {
+		bio_advance_iter(bio_src, &iter_src, offset);
+		iter_src.bi_size = size;
+	}
 
 	/*
 	 * Pre immutable biovecs, __bio_clone() used to just do a memcpy from
@@ -663,7 +662,8 @@ struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
 	 *    __bio_clone_fast() anyways.
 	 */
 
-	bio = bio_alloc_bioset(gfp_mask, bio_segments(bio_src), bs);
+	bio = bio_alloc_bioset(gfp_mask, __bio_segments(bio_src,
+			       &iter_src), bs);
 	if (!bio)
 		return NULL;
 	bio->bi_bdev		= bio_src->bi_bdev;
@@ -680,7 +680,7 @@ struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
 		bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
 		break;
 	default:
-		bio_for_each_segment(bv, bio_src, iter)
+		__bio_for_each_segment(bv, bio_src, iter, iter_src)
 			bio->bi_io_vec[bio->bi_vcnt++] = bv;
 		break;
 	}
@@ -699,8 +699,43 @@ struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
 
 	return bio;
 }
+
+/**
+ * 	bio_clone_bioset - clone a bio
+ * 	@bio_src: bio to clone
+ *	@gfp_mask: allocation priority
+ *	@bs: bio_set to allocate from
+ *
+ *	Clone bio. Caller will own the returned bio, but not the actual data it
+ *	points to. Reference count of returned bio will be one.
+ */
+struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
+			     struct bio_set *bs)
+{
+	return __bio_clone_bioset(bio_src, gfp_mask, bs, 0,
+				  bio_src->bi_iter.bi_size);
+}
 EXPORT_SYMBOL(bio_clone_bioset);
 
+/**
+ * 	bio_clone_bioset_partial - clone a partial bio
+ * 	@bio_src: bio to clone
+ *	@gfp_mask: allocation priority
+ *	@bs: bio_set to allocate from
+ *	@offset: cloned starting from the offset
+ *	@size: size for the cloned bio
+ *
+ *	Clone bio. Caller will own the returned bio, but not the actual data it
+ *	points to. Reference count of returned bio will be one.
+ */
+struct bio *bio_clone_bioset_partial(struct bio *bio_src, gfp_t gfp_mask,
+				     struct bio_set *bs, int offset,
+				     int size)
+{
+	return __bio_clone_bioset(bio_src, gfp_mask, bs, offset, size);
+}
+EXPORT_SYMBOL(bio_clone_bioset_partial);
+
 /**
  *	bio_add_pc_page	-	attempt to add page to bio
  *	@q: the target queue

drivers/md/faulty.c

@@ -214,7 +214,7 @@ static void faulty_make_request(struct mddev *mddev, struct bio *bio)
 		}
 	}
 	if (failit) {
-		struct bio *b = bio_clone_mddev(bio, GFP_NOIO, mddev);
+		struct bio *b = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
 
 		b->bi_bdev = conf->rdev->bdev;
 		b->bi_private = bio;

drivers/md/linear.c

@@ -53,18 +53,26 @@ static inline struct dev_info *which_dev(struct mddev *mddev, sector_t sector)
 	return conf->disks + lo;
 }
 
+/*
+ * In linear_congested() conf->raid_disks is used as a copy of
+ * mddev->raid_disks to iterate conf->disks[], because conf->raid_disks
+ * and conf->disks[] are created in linear_conf(), they are always
+ * consitent with each other, but mddev->raid_disks does not.
+ */
 static int linear_congested(struct mddev *mddev, int bits)
 {
 	struct linear_conf *conf;
 	int i, ret = 0;
 
-	conf = mddev->private;
+	rcu_read_lock();
+	conf = rcu_dereference(mddev->private);
 
-	for (i = 0; i < mddev->raid_disks && !ret ; i++) {
+	for (i = 0; i < conf->raid_disks && !ret ; i++) {
 		struct request_queue *q = bdev_get_queue(conf->disks[i].rdev->bdev);
 		ret |= bdi_congested(q->backing_dev_info, bits);
 	}
 
+	rcu_read_unlock();
 	return ret;
 }
 
@@ -144,6 +152,19 @@ static struct linear_conf *linear_conf(struct mddev *mddev, int raid_disks)
 			conf->disks[i-1].end_sector +
 			conf->disks[i].rdev->sectors;
 
+	/*
+	 * conf->raid_disks is copy of mddev->raid_disks. The reason to
+	 * keep a copy of mddev->raid_disks in struct linear_conf is,
+	 * mddev->raid_disks may not be consistent with pointers number of
+	 * conf->disks[] when it is updated in linear_add() and used to
+	 * iterate old conf->disks[] earray in linear_congested().
+	 * Here conf->raid_disks is always consitent with number of
+	 * pointers in conf->disks[] array, and mddev->private is updated
+	 * with rcu_assign_pointer() in linear_addr(), such race can be
+	 * avoided.
+	 */
+	conf->raid_disks = raid_disks;
+
 	return conf;
 
 out:
@@ -196,15 +217,24 @@ static int linear_add(struct mddev *mddev, struct md_rdev *rdev)
 	if (!newconf)
 		return -ENOMEM;
 
+	/* newconf->raid_disks already keeps a copy of * the increased
+	 * value of mddev->raid_disks, WARN_ONCE() is just used to make
+	 * sure of this. It is possible that oldconf is still referenced
+	 * in linear_congested(), therefore kfree_rcu() is used to free
+	 * oldconf until no one uses it anymore.
+	 */
 	mddev_suspend(mddev);
-	oldconf = mddev->private;
+	oldconf = rcu_dereference_protected(mddev->private,
+			lockdep_is_held(&mddev->reconfig_mutex));
 	mddev->raid_disks++;
-	mddev->private = newconf;
+	WARN_ONCE(mddev->raid_disks != newconf->raid_disks,
+		"copied raid_disks doesn't match mddev->raid_disks");
+	rcu_assign_pointer(mddev->private, newconf);
 	md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
 	set_capacity(mddev->gendisk, mddev->array_sectors);
 	mddev_resume(mddev);
 	revalidate_disk(mddev->gendisk);
-	kfree(oldconf);
+	kfree_rcu(oldconf, rcu);
 	return 0;
 }
 
@@ -262,6 +292,7 @@ static void linear_make_request(struct mddev *mddev, struct bio *bio)
 				trace_block_bio_remap(bdev_get_queue(split->bi_bdev),
 						      split, disk_devt(mddev->gendisk),
 						      bio_sector);
+			mddev_check_writesame(mddev, split);
 			generic_make_request(split);
 		}
 	} while (split != bio);

drivers/md/linear.h

@@ -10,6 +10,7 @@ struct linear_conf
 {
 	struct rcu_head		rcu;
 	sector_t		array_sectors;
+	int			raid_disks; /* a copy of mddev->raid_disks */
 	struct dev_info		disks[0];
 };
 #endif

drivers/md/md.c

@@ -190,16 +190,6 @@ struct bio *bio_alloc_mddev(gfp_t gfp_mask, int nr_iovecs,
 }
 EXPORT_SYMBOL_GPL(bio_alloc_mddev);
 
-struct bio *bio_clone_mddev(struct bio *bio, gfp_t gfp_mask,
-			    struct mddev *mddev)
-{
-	if (!mddev || !mddev->bio_set)
-		return bio_clone(bio, gfp_mask);
-
-	return bio_clone_bioset(bio, gfp_mask, mddev->bio_set);
-}
-EXPORT_SYMBOL_GPL(bio_clone_mddev);
-
 /*
  * We have a system wide 'event count' that is incremented
  * on any 'interesting' event, and readers of /proc/mdstat
@@ -5228,8 +5218,11 @@ int md_run(struct mddev *mddev)
 		sysfs_notify_dirent_safe(rdev->sysfs_state);
 	}
 
-	if (mddev->bio_set == NULL)
+	if (mddev->bio_set == NULL) {
 		mddev->bio_set = bioset_create(BIO_POOL_SIZE, 0);
+		if (!mddev->bio_set)
+			return -ENOMEM;
+	}
 
 	spin_lock(&pers_lock);
 	pers = find_pers(mddev->level, mddev->clevel);
@@ -8980,7 +8973,14 @@ static __exit void md_exit(void)
 
 	for_each_mddev(mddev, tmp) {
 		export_array(mddev);
+		mddev->ctime = 0;
 		mddev->hold_active = 0;
+		/*
+		 * for_each_mddev() will call mddev_put() at the end of each
+		 * iteration.  As the mddev is now fully clear, this will
+		 * schedule the mddev for destruction by a workqueue, and the
+		 * destroy_workqueue() below will wait for that to complete.
+		 */
 	}
 	destroy_workqueue(md_misc_wq);
 	destroy_workqueue(md_wq);

drivers/md/md.h

@@ -673,8 +673,6 @@ extern void md_rdev_clear(struct md_rdev *rdev);
 
 extern void mddev_suspend(struct mddev *mddev);
 extern void mddev_resume(struct mddev *mddev);
-extern struct bio *bio_clone_mddev(struct bio *bio, gfp_t gfp_mask,
-				   struct mddev *mddev);
 extern struct bio *bio_alloc_mddev(gfp_t gfp_mask, int nr_iovecs,
 				   struct mddev *mddev);
 
@@ -710,4 +708,11 @@ static inline void mddev_clear_unsupported_flags(struct mddev *mddev,
 {
 	mddev->flags &= ~unsupported_flags;
 }
+
+static inline void mddev_check_writesame(struct mddev *mddev, struct bio *bio)
+{
+	if (bio_op(bio) == REQ_OP_WRITE_SAME &&
+	    !bdev_get_queue(bio->bi_bdev)->limits.max_write_same_sectors)
+		mddev->queue->limits.max_write_same_sectors = 0;
+}
 #endif /* _MD_MD_H */

drivers/md/multipath.c

@@ -138,6 +138,7 @@ static void multipath_make_request(struct mddev *mddev, struct bio * bio)
 	mp_bh->bio.bi_opf |= REQ_FAILFAST_TRANSPORT;
 	mp_bh->bio.bi_end_io = multipath_end_request;
 	mp_bh->bio.bi_private = mp_bh;
+	mddev_check_writesame(mddev, &mp_bh->bio);
 	generic_make_request(&mp_bh->bio);
 	return;
 }

drivers/md/raid0.c

@@ -503,6 +503,7 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio)
 				trace_block_bio_remap(bdev_get_queue(split->bi_bdev),
 						      split, disk_devt(mddev->gendisk),
 						      bio_sector);
+			mddev_check_writesame(mddev, split);
 			generic_make_request(split);
 		}
 	} while (split != bio);

drivers/md/raid1.h

 #ifndef _RAID1_H
 #define _RAID1_H
 
+/*
+ * each barrier unit size is 64MB fow now
+ * note: it must be larger than RESYNC_DEPTH
+ */
+#define BARRIER_UNIT_SECTOR_BITS	17
+#define BARRIER_UNIT_SECTOR_SIZE	(1<<17)
+/*
+ * In struct r1conf, the following members are related to I/O barrier
+ * buckets,
+ *	atomic_t	*nr_pending;
+ *	atomic_t	*nr_waiting;
+ *	atomic_t	*nr_queued;
+ *	atomic_t	*barrier;
+ * Each of them points to array of atomic_t variables, each array is
+ * designed to have BARRIER_BUCKETS_NR elements and occupy a single
+ * memory page. The data width of atomic_t variables is 4 bytes, equal
+ * to 1<<(ilog2(sizeof(atomic_t))), BARRIER_BUCKETS_NR_BITS is defined
+ * as (PAGE_SHIFT - ilog2(sizeof(int))) to make sure an array of
+ * atomic_t variables with BARRIER_BUCKETS_NR elements just exactly
+ * occupies a single memory page.
+ */
+#define BARRIER_BUCKETS_NR_BITS		(PAGE_SHIFT - ilog2(sizeof(atomic_t)))
+#define BARRIER_BUCKETS_NR		(1<<BARRIER_BUCKETS_NR_BITS)
+
 struct raid1_info {
 	struct md_rdev	*rdev;
 	sector_t	head_position;
@@ -35,25 +59,6 @@ struct r1conf {
 						 */
 	int			raid_disks;
 
-	/* During resync, read_balancing is only allowed on the part
-	 * of the array that has been resynced.  'next_resync' tells us
-	 * where that is.
-	 */
-	sector_t		next_resync;
-
-	/* When raid1 starts resync, we divide array into four partitions
-	 * |---------|--------------|---------------------|-------------|
-	 *        next_resync   start_next_window       end_window
-	 * start_next_window = next_resync + NEXT_NORMALIO_DISTANCE
-	 * end_window = start_next_window + NEXT_NORMALIO_DISTANCE
-	 * current_window_requests means the count of normalIO between
-	 *   start_next_window and end_window.
-	 * next_window_requests means the count of normalIO after end_window.
-	 * */
-	sector_t		start_next_window;
-	int			current_window_requests;
-	int			next_window_requests;
-
 	spinlock_t		device_lock;
 
 	/* list of 'struct r1bio' that need to be processed by raid1d,
@@ -79,10 +84,10 @@ struct r1conf {
 	 */
 	wait_queue_head_t	wait_barrier;
 	spinlock_t		resync_lock;
-	int			nr_pending;
-	int			nr_waiting;
-	int			nr_queued;
-	int			barrier;
+	atomic_t		*nr_pending;
+	atomic_t		*nr_waiting;
+	atomic_t		*nr_queued;
+	atomic_t		*barrier;
 	int			array_frozen;
 
 	/* Set to 1 if a full sync is needed, (fresh device added).
@@ -135,7 +140,6 @@ struct r1bio {
 						 * in this BehindIO request
 						 */
 	sector_t		sector;
-	sector_t		start_next_window;
 	int			sectors;
 	unsigned long		state;
 	struct mddev		*mddev;
@@ -185,4 +189,10 @@ enum r1bio_state {
 	R1BIO_WriteError,
 	R1BIO_FailFast,
 };
+
+static inline int sector_to_idx(sector_t sector)
+{
+	return hash_long(sector >> BARRIER_UNIT_SECTOR_BITS,
+			 BARRIER_BUCKETS_NR_BITS);
+}
 #endif

drivers/md/raid10.c

@@ -1132,7 +1132,7 @@ static void raid10_read_request(struct mddev *mddev, struct bio *bio,
 	}
 	slot = r10_bio->read_slot;
 
-	read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+	read_bio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
 	bio_trim(read_bio, r10_bio->sector - bio->bi_iter.bi_sector,
 		 max_sectors);
 
@@ -1406,7 +1406,7 @@ static void raid10_write_request(struct mddev *mddev, struct bio *bio,
 		int d = r10_bio->devs[i].devnum;
 		if (r10_bio->devs[i].bio) {
 			struct md_rdev *rdev = conf->mirrors[d].rdev;
-			mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+			mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
 			bio_trim(mbio, r10_bio->sector - bio->bi_iter.bi_sector,
 				 max_sectors);
 			r10_bio->devs[i].bio = mbio;
@@ -1457,7 +1457,7 @@ static void raid10_write_request(struct mddev *mddev, struct bio *bio,
 				smp_mb();
 				rdev = conf->mirrors[d].rdev;
 			}
-			mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+			mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
 			bio_trim(mbio, r10_bio->sector - bio->bi_iter.bi_sector,
 				 max_sectors);
 			r10_bio->devs[i].repl_bio = mbio;
@@ -2565,7 +2565,7 @@ static int narrow_write_error(struct r10bio *r10_bio, int i)
 		if (sectors > sect_to_write)
 			sectors = sect_to_write;
 		/* Write at 'sector' for 'sectors' */
-		wbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+		wbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
 		bio_trim(wbio, sector - bio->bi_iter.bi_sector, sectors);
 		wsector = r10_bio->devs[i].addr + (sector - r10_bio->sector);
 		wbio->bi_iter.bi_sector = wsector +
@@ -2641,8 +2641,7 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio)
 			   mdname(mddev),
 			   bdevname(rdev->bdev, b),
 			   (unsigned long long)r10_bio->sector);
-	bio = bio_clone_mddev(r10_bio->master_bio,
-			      GFP_NOIO, mddev);
+	bio = bio_clone_fast(r10_bio->master_bio, GFP_NOIO, mddev->bio_set);
 	bio_trim(bio, r10_bio->sector - bio->bi_iter.bi_sector, max_sectors);
 	r10_bio->devs[slot].bio = bio;
 	r10_bio->devs[slot].rdev = rdev;

drivers/md/raid5.c

@@ -281,16 +281,16 @@ static void do_release_stripe(struct r5conf *conf, struct stripe_head *sh,
 						atomic_dec(&conf->r5c_cached_partial_stripes);
 					list_add_tail(&sh->lru, &conf->r5c_full_stripe_list);
 					r5c_check_cached_full_stripe(conf);
-				} else {
-					/* partial stripe */
-					if (!test_and_set_bit(STRIPE_R5C_PARTIAL_STRIPE,
-							      &sh->state))
-						atomic_inc(&conf->r5c_cached_partial_stripes);
+				} else
+					/*
+					 * STRIPE_R5C_PARTIAL_STRIPE is set in
+					 * r5c_try_caching_write(). No need to
+					 * set it again.
+					 */
 					list_add_tail(&sh->lru, &conf->r5c_partial_stripe_list);
 			}
 		}
 	}
-	}
 }
 
 static void __release_stripe(struct r5conf *conf, struct stripe_head *sh,
@@ -353,17 +353,15 @@ static void release_inactive_stripe_list(struct r5conf *conf,
 static int release_stripe_list(struct r5conf *conf,
 			       struct list_head *temp_inactive_list)
 {
-	struct stripe_head *sh;
+	struct stripe_head *sh, *t;
 	int count = 0;
 	struct llist_node *head;
 
 	head = llist_del_all(&conf->released_stripes);
 	head = llist_reverse_order(head);
-	while (head) {
+	llist_for_each_entry_safe(sh, t, head, release_list) {
 		int hash;
 
-		sh = llist_entry(head, struct stripe_head, release_list);
-		head = llist_next(head);
 		/* sh could be readded after STRIPE_ON_RELEASE_LIST is cleard */
 		smp_mb();
 		clear_bit(STRIPE_ON_RELEASE_LIST, &sh->state);
@@ -863,6 +861,43 @@ static int use_new_offset(struct r5conf *conf, struct stripe_head *sh)
 	return 1;
 }
 
+static void flush_deferred_bios(struct r5conf *conf)
+{
+	struct bio_list tmp;
+	struct bio *bio;
+
+	if (!conf->batch_bio_dispatch || !conf->group_cnt)
+		return;
+
+	bio_list_init(&tmp);
+	spin_lock(&conf->pending_bios_lock);
+	bio_list_merge(&tmp, &conf->pending_bios);
+	bio_list_init(&conf->pending_bios);
+	spin_unlock(&conf->pending_bios_lock);
+
+	while ((bio = bio_list_pop(&tmp)))
+		generic_make_request(bio);
+}
+
+static void defer_bio_issue(struct r5conf *conf, struct bio *bio)
+{
+	/*
+	 * change group_cnt will drain all bios, so this is safe
+	 *
+	 * A read generally means a read-modify-write, which usually means a
+	 * randwrite, so we don't delay it
+	 */
+	if (!conf->batch_bio_dispatch || !conf->group_cnt ||
+	    bio_op(bio) == REQ_OP_READ) {
+		generic_make_request(bio);
+		return;
+	}
+	spin_lock(&conf->pending_bios_lock);
+	bio_list_add(&conf->pending_bios, bio);
+	spin_unlock(&conf->pending_bios_lock);
+	md_wakeup_thread(conf->mddev->thread);
+}
+
 static void
 raid5_end_read_request(struct bio *bi);
 static void
@@ -1043,7 +1078,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
 				trace_block_bio_remap(bdev_get_queue(bi->bi_bdev),
 						      bi, disk_devt(conf->mddev->gendisk),
 						      sh->dev[i].sector);
-			generic_make_request(bi);
+			defer_bio_issue(conf, bi);
 		}
 		if (rrdev) {
 			if (s->syncing || s->expanding || s->expanded
@@ -1088,7 +1123,7 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
 				trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev),
 						      rbi, disk_devt(conf->mddev->gendisk),
 						      sh->dev[i].sector);
-			generic_make_request(rbi);
+			defer_bio_issue(conf, rbi);
 		}
 		if (!rdev && !rrdev) {
 			if (op_is_write(op))
@@ -2914,12 +2949,36 @@ sector_t raid5_compute_blocknr(struct stripe_head *sh, int i, int previous)
  *      like to flush data in journal to RAID disks first, so complex rmw
  *      is handled in the write patch (handle_stripe_dirtying).
  *
+ *   2. when journal space is critical (R5C_LOG_CRITICAL=1)
+ *
+ *      It is important to be able to flush all stripes in raid5-cache.
+ *      Therefore, we need reserve some space on the journal device for
+ *      these flushes. If flush operation includes pending writes to the
+ *      stripe, we need to reserve (conf->raid_disk + 1) pages per stripe
+ *      for the flush out. If we exclude these pending writes from flush
+ *      operation, we only need (conf->max_degraded + 1) pages per stripe.
+ *      Therefore, excluding pending writes in these cases enables more
+ *      efficient use of the journal device.
+ *
+ *      Note: To make sure the stripe makes progress, we only delay
+ *      towrite for stripes with data already in journal (injournal > 0).
+ *      When LOG_CRITICAL, stripes with injournal == 0 will be sent to
+ *      no_space_stripes list.
+ *
  */
-static inline bool delay_towrite(struct r5dev *dev,
+static inline bool delay_towrite(struct r5conf *conf,
+				 struct r5dev *dev,
 				 struct stripe_head_state *s)
 {
-	return !test_bit(R5_OVERWRITE, &dev->flags) &&
-		!test_bit(R5_Insync, &dev->flags) && s->injournal;
+	/* case 1 above */
+	if (!test_bit(R5_OVERWRITE, &dev->flags) &&
+	    !test_bit(R5_Insync, &dev->flags) && s->injournal)
+		return true;
+	/* case 2 above */
+	if (test_bit(R5C_LOG_CRITICAL, &conf->cache_state) &&
+	    s->injournal > 0)
+		return true;
+	return false;
 }
 
 static void
@@ -2942,7 +3001,7 @@ schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
 		for (i = disks; i--; ) {
 			struct r5dev *dev = &sh->dev[i];
 
-			if (dev->towrite && !delay_towrite(dev, s)) {
+			if (dev->towrite && !delay_towrite(conf, dev, s)) {
 				set_bit(R5_LOCKED, &dev->flags);
 				set_bit(R5_Wantdrain, &dev->flags);
 				if (!expand)
@@ -3694,7 +3753,7 @@ static int handle_stripe_dirtying(struct r5conf *conf,
 	} else for (i = disks; i--; ) {
 		/* would I have to read this buffer for read_modify_write */
 		struct r5dev *dev = &sh->dev[i];
-		if (((dev->towrite && !delay_towrite(dev, s)) ||
+		if (((dev->towrite && !delay_towrite(conf, dev, s)) ||
 		     i == sh->pd_idx || i == sh->qd_idx ||
 		     test_bit(R5_InJournal, &dev->flags)) &&
 		    !test_bit(R5_LOCKED, &dev->flags) &&
@@ -3718,8 +3777,8 @@ static int handle_stripe_dirtying(struct r5conf *conf,
 		}
 	}
 
-	pr_debug("for sector %llu, rmw=%d rcw=%d\n",
-		(unsigned long long)sh->sector, rmw, rcw);
+	pr_debug("for sector %llu state 0x%lx, rmw=%d rcw=%d\n",
+		 (unsigned long long)sh->sector, sh->state, rmw, rcw);
 	set_bit(STRIPE_HANDLE, &sh->state);
 	if ((rmw < rcw || (rmw == rcw && conf->rmw_level == PARITY_PREFER_RMW)) && rmw > 0) {
 		/* prefer read-modify-write, but need to get some data */
@@ -3759,7 +3818,7 @@ static int handle_stripe_dirtying(struct r5conf *conf,
 
 		for (i = disks; i--; ) {
 			struct r5dev *dev = &sh->dev[i];
-			if (((dev->towrite && !delay_towrite(dev, s)) ||
+			if (((dev->towrite && !delay_towrite(conf, dev, s)) ||
 			     i == sh->pd_idx || i == sh->qd_idx ||
 			     test_bit(R5_InJournal, &dev->flags)) &&
 			    !test_bit(R5_LOCKED, &dev->flags) &&
@@ -4995,9 +5054,9 @@ static int raid5_read_one_chunk(struct mddev *mddev, struct bio *raid_bio)
 		return 0;
 	}
 	/*
-	 * use bio_clone_mddev to make a copy of the bio
+	 * use bio_clone_fast to make a copy of the bio
 	 */
-	align_bi = bio_clone_mddev(raid_bio, GFP_NOIO, mddev);
+	align_bi = bio_clone_fast(raid_bio, GFP_NOIO, mddev->bio_set);
 	if (!align_bi)
 		return 0;
 	/*
@@ -5025,6 +5084,13 @@ static int raid5_read_one_chunk(struct mddev *mddev, struct bio *raid_bio)
 		      rdev->recovery_offset >= end_sector)))
 			rdev = NULL;
 	}
+
+	if (r5c_big_stripe_cached(conf, align_bi->bi_iter.bi_sector)) {
+		rcu_read_unlock();
+		bio_put(align_bi);
+		return 0;
+	}
+
 	if (rdev) {
 		sector_t first_bad;
 		int bad_sectors;
@@ -5381,7 +5447,6 @@ static void raid5_make_request(struct mddev *mddev, struct bio * bi)
 	 * data on failed drives.
 	 */
 	if (rw == READ && mddev->degraded == 0 &&
-	    !r5c_is_writeback(conf->log) &&
 	    mddev->reshape_position == MaxSector) {
 		bi = chunk_aligned_read(mddev, bi);
 		if (!bi)
@@ -6126,6 +6191,8 @@ static void raid5d(struct md_thread *thread)
 		mutex_unlock(&conf->cache_size_mutex);
 	}
 
+	flush_deferred_bios(conf);
+
 	r5l_flush_stripe_to_raid(conf->log);
 
 	async_tx_issue_pending_all();
@@ -6711,6 +6778,18 @@ static struct r5conf *setup_conf(struct mddev *mddev)
 	atomic_set(&conf->active_stripes, 0);
 	atomic_set(&conf->preread_active_stripes, 0);
 	atomic_set(&conf->active_aligned_reads, 0);
+	bio_list_init(&conf->pending_bios);
+	spin_lock_init(&conf->pending_bios_lock);
+	conf->batch_bio_dispatch = true;
+	rdev_for_each(rdev, mddev) {
+		if (test_bit(Journal, &rdev->flags))
+			continue;
+		if (blk_queue_nonrot(bdev_get_queue(rdev->bdev))) {
+			conf->batch_bio_dispatch = false;
+			break;
+		}
+	}
+
 	conf->bypass_threshold = BYPASS_THRESHOLD;
 	conf->recovery_disabled = mddev->recovery_disabled - 1;
 
@@ -6757,6 +6836,8 @@ static struct r5conf *setup_conf(struct mddev *mddev)
 	INIT_LIST_HEAD(&conf->r5c_full_stripe_list);
 	atomic_set(&conf->r5c_cached_partial_stripes, 0);
 	INIT_LIST_HEAD(&conf->r5c_partial_stripe_list);
+	atomic_set(&conf->r5c_flushing_full_stripes, 0);
+	atomic_set(&conf->r5c_flushing_partial_stripes, 0);
 
 	conf->level = mddev->new_level;
 	conf->chunk_sectors = mddev->new_chunk_sectors;

drivers/md/raid5.h

@@ -663,6 +663,8 @@ struct r5conf {
 	struct list_head	r5c_full_stripe_list;
 	atomic_t		r5c_cached_partial_stripes;
 	struct list_head	r5c_partial_stripe_list;
+	atomic_t		r5c_flushing_full_stripes;
+	atomic_t		r5c_flushing_partial_stripes;
 
 	atomic_t		empty_inactive_list_nr;
 	struct llist_head	released_stripes;
@@ -684,6 +686,10 @@ struct r5conf {
 	int			group_cnt;
 	int			worker_cnt_per_group;
 	struct r5l_log		*log;
+
+	struct bio_list		pending_bios;
+	spinlock_t		pending_bios_lock;
+	bool			batch_bio_dispatch;
 };
 
 
@@ -788,4 +794,5 @@ extern void r5c_check_stripe_cache_usage(struct r5conf *conf);
 extern void r5c_check_cached_full_stripe(struct r5conf *conf);
 extern struct md_sysfs_entry r5c_journal_mode;
 extern void r5c_update_on_rdev_error(struct mddev *mddev);
+extern bool r5c_big_stripe_cached(struct r5conf *conf, sector_t sect);
 #endif

include/linux/bio.h

@@ -183,7 +183,7 @@ static inline void bio_advance_iter(struct bio *bio, struct bvec_iter *iter,
 
 #define bio_iter_last(bvec, iter) ((iter).bi_size == (bvec).bv_len)
 
-static inline unsigned bio_segments(struct bio *bio)
+static inline unsigned __bio_segments(struct bio *bio, struct bvec_iter *bvec)
 {
 	unsigned segs = 0;
 	struct bio_vec bv;
@@ -205,12 +205,17 @@ static inline unsigned bio_segments(struct bio *bio)
 		break;
 	}
 
-	bio_for_each_segment(bv, bio, iter)
+	__bio_for_each_segment(bv, bio, iter, *bvec)
 		segs++;
 
 	return segs;
 }
 
+static inline unsigned bio_segments(struct bio *bio)
+{
+	return __bio_segments(bio, &bio->bi_iter);
+}
+
 /*
  * get a reference to a bio, so it won't disappear. the intended use is
  * something like:
@@ -384,6 +389,8 @@ extern void bio_put(struct bio *);
 extern void __bio_clone_fast(struct bio *, struct bio *);
 extern struct bio *bio_clone_fast(struct bio *, gfp_t, struct bio_set *);
 extern struct bio *bio_clone_bioset(struct bio *, gfp_t, struct bio_set *bs);
+extern struct bio *bio_clone_bioset_partial(struct bio *, gfp_t,
+					    struct bio_set *, int, int);
 
 extern struct bio_set *fs_bio_set;
 

lib/radix-tree.c

@@ -1102,6 +1102,7 @@ void radix_tree_replace_slot(struct radix_tree_root *root,
 {
 	replace_slot(root, NULL, slot, item, true);
 }
+EXPORT_SYMBOL(radix_tree_replace_slot);
 
 /**
  * radix_tree_iter_replace - replace item in a slot