Commit a6ff5aeb authored by Aisheng Dong's avatar Aisheng Dong Committed by Ulf Hansson

mmc: sdhci: add platform get_max_timeout_count hook

Currently the max timeout count is hardcode to 1 << 27 for calcuate
the max_busy_timeout, however, for some platforms the max timeout
count may not be 1 << 27, e.g. i.MX uSDHC is 1 << 28.
Thus 1 << 27 is not correct for such platform.

It is also possible that other platforms may have different values.
To be flexible, we add a get_max_timeout_count hook to get the correct
maximum timeout value for these platforms.
Reviewed-by: default avatarShawn Guo <shawn.guo@linaro.org>
Signed-off-by: default avatarDong Aisheng <b29396@freescale.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent a6386403
......@@ -1197,7 +1197,10 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) {
host->timeout_clk = host->mmc->actual_clock / 1000;
host->mmc->max_busy_timeout =
(1 << 27) / host->timeout_clk;
host->ops->get_max_timeout_count ?
host->ops->get_max_timeout_count(host) :
1 << 27;
host->mmc->max_busy_timeout /= host->timeout_clk;
}
}
......@@ -2937,7 +2940,9 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
host->timeout_clk = mmc->f_max / 1000;
mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
mmc->max_busy_timeout = host->ops->get_max_timeout_count ?
host->ops->get_max_timeout_count(host) : 1 << 27;
mmc->max_busy_timeout /= host->timeout_clk;
mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
......
......@@ -281,6 +281,7 @@ struct sdhci_ops {
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_min_clock)(struct sdhci_host *host);
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
void (*set_bus_width)(struct sdhci_host *host, int width);
void (*platform_send_init_74_clocks)(struct sdhci_host *host,
u8 power_mode);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment