Merge tag 'omap-for-v3.16/board-signed' of...

Merge tag 'omap-for-v3.16/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards

Merge "ARM: omap board changes for v3.16 merge window" from Tony Lindgren:

Board related changes for omaps.

* tag 'omap-for-v3.16/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
  ARM: OMAP: AM3517EVM: remove check for CONFIG_PANEL_SHARP_LQ043T1DG01
  ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH
  ARM: OMAP: remove some dead code
  ARM: OMAP: omap3stalker: remove two Kconfig macros
  ARM: OMAP2+: Add support for RNG on DT booted N900
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-omap1/board-h2.c

@@ -346,7 +346,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg		= 2,
 
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
 #elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)

arch/arm/mach-omap1/board-h3.c

@@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg	    = 2,
 
-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
 #elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */

arch/arm/mach-omap1/board-innovator.c

@@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg		= 2,
 
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
 #elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)

arch/arm/mach-omap1/board-osk.c

@@ -283,7 +283,7 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
 	 * a peripheral.
 	 */
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.register_dev	= 1,
 	.hmc_mode	= 0,
 #else

arch/arm/mach-omap1/board-sx1.c

@@ -266,31 +266,6 @@ static struct physmap_flash_data sx1_flash_data = {
 	.nr_parts	= ARRAY_SIZE(sx1_partitions),
 };
 
-#ifdef CONFIG_SX1_OLD_FLASH
-/* MTD Intel StrataFlash - old flashes */
-static struct resource sx1_old_flash_resource[] = {
-	[0] = {
-		.start	= OMAP_CS0_PHYS,	/* Physical */
-		.end	= OMAP_CS0_PHYS + SZ_16M - 1,,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_CS1_PHYS,
-		.end	= OMAP_CS1_PHYS + SZ_8M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sx1_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sx1_flash_data,
-	},
-	.num_resources	= 2,
-	.resource	= &sx1_old_flash_resource,
-};
-#else
 /* MTD Intel 4000 flash - new flashes */
 static struct resource sx1_new_flash_resource = {
 	.start		= OMAP_CS0_PHYS,
@@ -307,7 +282,6 @@ static struct platform_device sx1_flash_device = {
 	.num_resources	= 1,
 	.resource	= &sx1_new_flash_resource,
 };
-#endif
 
 /*----------- USB -------------------------*/
 

arch/arm/mach-omap1/pm.c

@@ -123,19 +123,8 @@ void omap1_pm_idle(void)
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
 	use_idlect1 = use_idlect1 & ~(1 << 9);
 #else
-
-	while (enable_dyn_sleep) {
-
-#ifdef CONFIG_CBUS_TAHVO_USB
-		extern int vbus_active;
-		/* Clock requirements? */
-		if (vbus_active)
-			break;
-#endif
+	if (enable_dyn_sleep)
 		do_sleep = 1;
-		break;
-	}
-
 #endif
 
 #ifdef CONFIG_OMAP_DM_TIMER

arch/arm/mach-omap2/board-am3517evm.c

@@ -262,12 +262,7 @@ static struct usbhs_phy_data phy_data[] __initdata = {
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
-		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-#else
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-#endif
 };
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/board-omap3stalker.c

@@ -121,11 +121,7 @@ static struct platform_device omap3stalker_tfp410_device = {
 static struct connector_atv_platform_data omap3stalker_tv_pdata = {
 	.name = "tv",
 	.source = "venc.0",
-#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
 	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
-#endif
 	.invert_polarity = false,
 };
 

arch/arm/mach-omap2/pdata-quirks.c

@@ -226,6 +226,14 @@ static void __init am3517_evm_legacy_init(void)
 	am35xx_emac_reset();
 }
 
+static struct platform_device omap3_rom_rng_device = {
+	.name		= "omap3-rom-rng",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= rx51_secure_rng_call,
+	},
+};
+
 static void __init nokia_n900_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
@@ -239,6 +247,10 @@ static void __init nokia_n900_legacy_init(void)
 			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
 			pr_warning("Thumb binaries may crash randomly without this workaround\n");
 		}
+
+		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		platform_device_register(&omap3_rom_rng_device);
+
 	}
 }
 #endif /* CONFIG_ARCH_OMAP3 */

drivers/usb/phy/phy-isp1301-omap.c

@@ -1295,7 +1295,7 @@ isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
 		return isp1301_otg_enable(isp);
 	return 0;
 
-#elif	!defined(CONFIG_USB_GADGET_OMAP)
+#elif !IS_ENABLED(CONFIG_USB_OMAP)
 	// FIXME update its refcount
 	otg->host = host;