Commit b877039a authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx7d-sdb: Adjust the regulator nodes

It is not recommended to place the regulator nodes inside 'simple-bus',
so adjust them accordingly.

The motivation for rearranging this is to make it easier to add new
regulator nodes in the future.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 12de44f5
...@@ -73,47 +73,37 @@ extended_io: gpio-expander@0 { ...@@ -73,47 +73,37 @@ extended_io: gpio-expander@0 {
}; };
}; };
regulators { reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
compatible = "simple-bus"; compatible = "regulator-fixed";
#address-cells = <1>; regulator-name = "usb_otg1_vbus";
#size-cells = <0>; regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
reg_usb_otg1_vbus: regulator@0 { gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
compatible = "regulator-fixed"; enable-active-high;
reg = <0>; };
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg2_vbus: regulator@1 { reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
reg = <1>; regulator-name = "usb_otg2_vbus";
regulator-name = "usb_otg2_vbus"; regulator-min-microvolt = <5000000>;
regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
regulator-max-microvolt = <5000000>; gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; enable-active-high;
enable-active-high; };
};
reg_can2_3v3: regulator@2 { reg_can2_3v3: regulator-can2-3v3 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
reg = <2>; regulator-name = "can2-3v3";
regulator-name = "can2-3v3"; regulator-min-microvolt = <3300000>;
regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
regulator-max-microvolt = <3300000>; gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; };
};
reg_vref_1v8: regulator@3 { reg_vref_1v8: regulator-vref-1v8 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
reg = <3>; regulator-name = "vref-1v8";
regulator-name = "vref-1v8"; regulator-min-microvolt = <1800000>;
regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment