drm: Nuke modifier[1-3]

It has been suggested that having per-plane modifiers is making life
more difficult for userspace, so let's just retire modifier[1-3] and
use modifier[0] to apply to the entire framebuffer.

Obviosuly this means that if individual planes need different tiling
layouts and whatnot we will need a new modifier for each combination
of planes with different tiling layouts.

For a bit of extra backwards compatilbilty the kernel will allow
non-zero modifier[1+] but it require that they will match modifier[0].
This in case there's existing userspace out there that sets
modifier[1+] to something non-zero with planar formats.

Mostly a cocci job, with a bit of manual stuff mixed in.

@@
struct drm_framebuffer *fb;
expression E;
@@
- fb->modifier[E]
+ fb->modifier

@@
struct drm_framebuffer fb;
expression E;
@@
- fb.modifier[E]
+ fb.modifier

Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Cc: dczaplejewicz@collabora.co.uk
Suggested-by: Kristian Høgsberg <hoegsberg@gmail.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com

drivers/gpu/drm/drm_atomic.c

@@ -965,12 +965,12 @@ static void drm_atomic_plane_print_state(struct drm_printer *p,
 
 		drm_printf(p, "\t\tformat=%s\n",
 		              drm_get_format_name(fb->pixel_format, &format_name));
+		drm_printf(p, "\t\t\tmodifier=0x%llx\n", fb->modifier);
 		drm_printf(p, "\t\tsize=%dx%d\n", fb->width, fb->height);
 		drm_printf(p, "\t\tlayers:\n");
 		for (i = 0; i < n; i++) {
 			drm_printf(p, "\t\t\tpitch[%d]=%u\n", i, fb->pitches[i]);
 			drm_printf(p, "\t\t\toffset[%d]=%u\n", i, fb->offsets[i]);
-			drm_printf(p, "\t\t\tmodifier[%d]=0x%llx\n", i, fb->modifier[i]);
 		}
 	}
 	drm_printf(p, "\tcrtc-pos=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&dest));

drivers/gpu/drm/drm_framebuffer.c

@@ -177,6 +177,13 @@ static int framebuffer_check(const struct drm_mode_fb_cmd2 *r)
 			return -EINVAL;
 		}
 
+		if (r->flags & DRM_MODE_FB_MODIFIERS &&
+		    r->modifier[i] != r->modifier[0]) {
+			DRM_DEBUG_KMS("bad fb modifier %llu for plane %d\n",
+				      r->modifier[i], i);
+			return -EINVAL;
+		}
+
 		/* modifier specific checks: */
 		switch (r->modifier[i]) {
 		case DRM_FORMAT_MOD_SAMSUNG_64_32_TILE:

drivers/gpu/drm/drm_modeset_helper.c

@@ -93,8 +93,8 @@ void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
 	for (i = 0; i < 4; i++) {
 		fb->pitches[i] = mode_cmd->pitches[i];
 		fb->offsets[i] = mode_cmd->offsets[i];
-		fb->modifier[i] = mode_cmd->modifier[i];
 	}
+	fb->modifier = mode_cmd->modifier[0];
 	fb->pixel_format = mode_cmd->pixel_format;
 	fb->flags = mode_cmd->flags;
 }

drivers/gpu/drm/i915/i915_debugfs.c

@@ -1896,7 +1896,7 @@ static int i915_gem_framebuffer_info(struct seq_file *m, void *data)
 			   fbdev_fb->base.height,
 			   fbdev_fb->base.depth,
 			   fbdev_fb->base.bits_per_pixel,
-			   fbdev_fb->base.modifier[0],
+			   fbdev_fb->base.modifier,
 			   drm_framebuffer_read_refcount(&fbdev_fb->base));
 		describe_obj(m, fbdev_fb->obj);
 		seq_putc(m, '\n');
@@ -1914,7 +1914,7 @@ static int i915_gem_framebuffer_info(struct seq_file *m, void *data)
 			   fb->base.height,
 			   fb->base.depth,
 			   fb->base.bits_per_pixel,
-			   fb->base.modifier[0],
+			   fb->base.modifier,
 			   drm_framebuffer_read_refcount(&fb->base));
 		describe_obj(m, fb->obj);
 		seq_putc(m, '\n');

drivers/gpu/drm/i915/intel_atomic_plane.c

@@ -143,8 +143,8 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
 	if (state->fb && drm_rotation_90_or_270(state->rotation)) {
 		struct drm_format_name_buf format_name;
 
-		if (!(state->fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
-			state->fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED)) {
+		if (state->fb->modifier != I915_FORMAT_MOD_Y_TILED &&
+		    state->fb->modifier != I915_FORMAT_MOD_Yf_TILED) {
 			DRM_DEBUG_KMS("Y/Yf tiling required for 90/270!\n");
 			return -EINVAL;
 		}

drivers/gpu/drm/i915/intel_display.c

@@ -2195,7 +2195,7 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, unsigned int rotation)
 
 	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
 
-	alignment = intel_surf_alignment(dev_priv, fb->modifier[0]);
+	alignment = intel_surf_alignment(dev_priv, fb->modifier);
 
 	intel_fill_fb_ggtt_view(&view, fb, rotation);
 
@@ -2356,13 +2356,13 @@ static u32 intel_adjust_tile_offset(int *x, int *y,
 
 	WARN_ON(new_offset > old_offset);
 
-	if (fb->modifier[plane] != DRM_FORMAT_MOD_NONE) {
+	if (fb->modifier != DRM_FORMAT_MOD_NONE) {
 		unsigned int tile_size, tile_width, tile_height;
 		unsigned int pitch_tiles;
 
 		tile_size = intel_tile_size(dev_priv);
 		intel_tile_dims(dev_priv, &tile_width, &tile_height,
-				fb->modifier[plane], cpp);
+				fb->modifier, cpp);
 
 		if (drm_rotation_90_or_270(rotation)) {
 			pitch_tiles = pitch / tile_height;
@@ -2405,7 +2405,7 @@ static u32 _intel_compute_tile_offset(const struct drm_i915_private *dev_priv,
 				      unsigned int rotation,
 				      u32 alignment)
 {
-	uint64_t fb_modifier = fb->modifier[plane];
+	uint64_t fb_modifier = fb->modifier;
 	unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
 	u32 offset, offset_aligned;
 
@@ -2464,7 +2464,7 @@ u32 intel_compute_tile_offset(int *x, int *y,
 	if (fb->pixel_format == DRM_FORMAT_NV12 && plane == 1)
 		alignment = 4096;
 	else
-		alignment = intel_surf_alignment(dev_priv, fb->modifier[plane]);
+		alignment = intel_surf_alignment(dev_priv, fb->modifier);
 
 	return _intel_compute_tile_offset(dev_priv, x, y, fb, plane, pitch,
 					  rotation, alignment);
@@ -2546,13 +2546,13 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
 						    DRM_ROTATE_0, tile_size);
 		offset /= tile_size;
 
-		if (fb->modifier[i] != DRM_FORMAT_MOD_NONE) {
+		if (fb->modifier != DRM_FORMAT_MOD_NONE) {
 			unsigned int tile_width, tile_height;
 			unsigned int pitch_tiles;
 			struct drm_rect r;
 
 			intel_tile_dims(dev_priv, &tile_width, &tile_height,
-					fb->modifier[i], cpp);
+					fb->modifier, cpp);
 
 			rot_info->plane[i].offset = offset;
 			rot_info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i], tile_width * cpp);
@@ -2711,7 +2711,7 @@ intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
 	mode_cmd.width = fb->width;
 	mode_cmd.height = fb->height;
 	mode_cmd.pitches[0] = fb->pitches[0];
-	mode_cmd.modifier[0] = fb->modifier[0];
+	mode_cmd.modifier[0] = fb->modifier;
 	mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
 
 	if (intel_framebuffer_init(dev, to_intel_framebuffer(fb),
@@ -2841,7 +2841,7 @@ static int skl_max_plane_width(const struct drm_framebuffer *fb, int plane,
 {
 	int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
 
-	switch (fb->modifier[plane]) {
+	switch (fb->modifier) {
 	case DRM_FORMAT_MOD_NONE:
 	case I915_FORMAT_MOD_X_TILED:
 		switch (cpp) {
@@ -2872,7 +2872,7 @@ static int skl_max_plane_width(const struct drm_framebuffer *fb, int plane,
 		}
 		break;
 	default:
-		MISSING_CASE(fb->modifier[plane]);
+		MISSING_CASE(fb->modifier);
 	}
 
 	return 2048;
@@ -2900,7 +2900,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	intel_add_fb_offsets(&x, &y, plane_state, 0);
 	offset = intel_compute_tile_offset(&x, &y, plane_state, 0);
 
-	alignment = intel_surf_alignment(dev_priv, fb->modifier[0]);
+	alignment = intel_surf_alignment(dev_priv, fb->modifier);
 
 	/*
 	 * AUX surface offset is specified as the distance from the
@@ -2917,7 +2917,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	 *
 	 * TODO: linear and Y-tiled seem fine, Yf untested,
 	 */
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED) {
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED) {
 		int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
 
 		while ((x + w) * cpp > fb->pitches[0]) {
@@ -3067,7 +3067,7 @@ static void i9xx_update_primary_plane(struct drm_plane *primary,
 	}
 
 	if (INTEL_GEN(dev_priv) >= 4 &&
-	    fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	    fb->modifier == I915_FORMAT_MOD_X_TILED)
 		dspcntr |= DISPPLANE_TILED;
 
 	if (IS_G4X(dev_priv))
@@ -3169,7 +3169,7 @@ static void ironlake_update_primary_plane(struct drm_plane *primary,
 		BUG();
 	}
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		dspcntr |= DISPPLANE_TILED;
 
 	if (!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv))
@@ -3278,9 +3278,9 @@ u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
 	if (drm_rotation_90_or_270(rotation)) {
 		int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
 
-		stride /= intel_tile_height(dev_priv, fb->modifier[0], cpp);
+		stride /= intel_tile_height(dev_priv, fb->modifier, cpp);
 	} else {
-		stride /= intel_fb_stride_alignment(dev_priv, fb->modifier[0],
+		stride /= intel_fb_stride_alignment(dev_priv, fb->modifier,
 						    fb->pixel_format);
 	}
 
@@ -3399,7 +3399,7 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
 		    PLANE_CTL_PIPE_CSC_ENABLE;
 
 	plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
-	plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
+	plane_ctl |= skl_plane_ctl_tiling(fb->modifier);
 	plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
 	plane_ctl |= skl_plane_ctl_rotation(rotation);
 
@@ -8730,7 +8730,7 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
 	if (INTEL_INFO(dev)->gen >= 4) {
 		if (val & DISPPLANE_TILED) {
 			plane_config->tiling = I915_TILING_X;
-			fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
+			fb->modifier = I915_FORMAT_MOD_X_TILED;
 		}
 	}
 
@@ -8759,7 +8759,7 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
 
 	aligned_height = intel_fb_align_height(dev, fb->height,
 					       fb->pixel_format,
-					       fb->modifier[0]);
+					       fb->modifier);
 
 	plane_config->size = fb->pitches[0] * aligned_height;
 
@@ -9773,17 +9773,17 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	tiling = val & PLANE_CTL_TILED_MASK;
 	switch (tiling) {
 	case PLANE_CTL_TILED_LINEAR:
-		fb->modifier[0] = DRM_FORMAT_MOD_NONE;
+		fb->modifier = DRM_FORMAT_MOD_NONE;
 		break;
 	case PLANE_CTL_TILED_X:
 		plane_config->tiling = I915_TILING_X;
-		fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
+		fb->modifier = I915_FORMAT_MOD_X_TILED;
 		break;
 	case PLANE_CTL_TILED_Y:
-		fb->modifier[0] = I915_FORMAT_MOD_Y_TILED;
+		fb->modifier = I915_FORMAT_MOD_Y_TILED;
 		break;
 	case PLANE_CTL_TILED_YF:
-		fb->modifier[0] = I915_FORMAT_MOD_Yf_TILED;
+		fb->modifier = I915_FORMAT_MOD_Yf_TILED;
 		break;
 	default:
 		MISSING_CASE(tiling);
@@ -9800,13 +9800,13 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	fb->width = ((val >> 0) & 0x1fff) + 1;
 
 	val = I915_READ(PLANE_STRIDE(pipe, 0));
-	stride_mult = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
+	stride_mult = intel_fb_stride_alignment(dev_priv, fb->modifier,
 						fb->pixel_format);
 	fb->pitches[0] = (val & 0x3ff) * stride_mult;
 
 	aligned_height = intel_fb_align_height(dev, fb->height,
 					       fb->pixel_format,
-					       fb->modifier[0]);
+					       fb->modifier);
 
 	plane_config->size = fb->pitches[0] * aligned_height;
 
@@ -9874,7 +9874,7 @@ ironlake_get_initial_plane_config(struct intel_crtc *crtc,
 	if (INTEL_INFO(dev)->gen >= 4) {
 		if (val & DISPPLANE_TILED) {
 			plane_config->tiling = I915_TILING_X;
-			fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
+			fb->modifier = I915_FORMAT_MOD_X_TILED;
 		}
 	}
 
@@ -9903,7 +9903,7 @@ ironlake_get_initial_plane_config(struct intel_crtc *crtc,
 
 	aligned_height = intel_fb_align_height(dev, fb->height,
 					       fb->pixel_format,
-					       fb->modifier[0]);
+					       fb->modifier);
 
 	plane_config->size = fb->pitches[0] * aligned_height;
 
@@ -11818,7 +11818,7 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
 	intel_ring_emit(ring, fb->pitches[0]);
 	intel_ring_emit(ring, intel_crtc->flip_work->gtt_offset |
-			intel_fb_modifier_to_tiling(fb->modifier[0]));
+			intel_fb_modifier_to_tiling(fb->modifier));
 
 	/* XXX Enabling the panel-fitter across page-flip is so far
 	 * untested on non-native modes, so ignore it for now.
@@ -11851,7 +11851,7 @@ static int intel_gen6_queue_flip(struct drm_device *dev,
 	intel_ring_emit(ring, MI_DISPLAY_FLIP |
 			MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
 	intel_ring_emit(ring, fb->pitches[0] |
-			intel_fb_modifier_to_tiling(fb->modifier[0]));
+			intel_fb_modifier_to_tiling(fb->modifier));
 	intel_ring_emit(ring, intel_crtc->flip_work->gtt_offset);
 
 	/* Contrary to the suggestions in the documentation,
@@ -11957,7 +11957,7 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
 
 	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
 	intel_ring_emit(ring, fb->pitches[0] |
-			intel_fb_modifier_to_tiling(fb->modifier[0]));
+			intel_fb_modifier_to_tiling(fb->modifier));
 	intel_ring_emit(ring, intel_crtc->flip_work->gtt_offset);
 	intel_ring_emit(ring, (MI_NOOP));
 
@@ -12003,7 +12003,7 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
 
 	ctl = I915_READ(PLANE_CTL(pipe, 0));
 	ctl &= ~PLANE_CTL_TILED_MASK;
-	switch (fb->modifier[0]) {
+	switch (fb->modifier) {
 	case DRM_FORMAT_MOD_NONE:
 		break;
 	case I915_FORMAT_MOD_X_TILED:
@@ -12016,7 +12016,7 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
 		ctl |= PLANE_CTL_TILED_YF;
 		break;
 	default:
-		MISSING_CASE(fb->modifier[0]);
+		MISSING_CASE(fb->modifier);
 	}
 
 	/*
@@ -12041,7 +12041,7 @@ static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
 
 	dspcntr = I915_READ(reg);
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		dspcntr |= DISPPLANE_TILED;
 	else
 		dspcntr &= ~DISPPLANE_TILED;
@@ -12256,7 +12256,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 
 	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		engine = dev_priv->engine[BCS];
-		if (fb->modifier[0] != old_fb->modifier[0])
+		if (fb->modifier != old_fb->modifier)
 			/* vlv: DISPLAY_FLIP fails to change tiling */
 			engine = NULL;
 	} else if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) {
@@ -12412,7 +12412,7 @@ static bool intel_wm_need_update(struct drm_plane *plane,
 	if (!cur->base.fb || !new->base.fb)
 		return false;
 
-	if (cur->base.fb->modifier[0] != new->base.fb->modifier[0] ||
+	if (cur->base.fb->modifier != new->base.fb->modifier ||
 	    cur->base.rotation != new->base.rotation ||
 	    drm_rect_width(&new->base.src) != drm_rect_width(&cur->base.src) ||
 	    drm_rect_height(&new->base.src) != drm_rect_height(&cur->base.src) ||
@@ -15106,7 +15106,7 @@ intel_check_cursor_plane(struct drm_plane *plane,
 		return -ENOMEM;
 	}
 
-	if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
+	if (fb->modifier != DRM_FORMAT_MOD_NONE) {
 		DRM_DEBUG_KMS("cursor cannot be tiled\n");
 		return -EINVAL;
 	}

drivers/gpu/drm/i915/intel_fbdev.c

@@ -633,7 +633,7 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 		cur_size = intel_crtc->config->base.adjusted_mode.crtc_vdisplay;
 		cur_size = intel_fb_align_height(dev, cur_size,
 						 fb->base.pixel_format,
-						 fb->base.modifier[0]);
+						 fb->base.modifier);
 		cur_size *= fb->base.pitches[0];
 		DRM_DEBUG_KMS("pipe %c area: %dx%d, bpp: %d, size: %d\n",
 			      pipe_name(intel_crtc->pipe),

drivers/gpu/drm/i915/intel_pm.c

@@ -3063,7 +3063,7 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
 		latency = dev_priv->wm.skl_latency[level];
 
 		if (skl_needs_memory_bw_wa(intel_state) &&
-		    plane->base.state->fb->modifier[0] ==
+		    plane->base.state->fb->modifier ==
 		    I915_FORMAT_MOD_X_TILED)
 			latency += 15;
 
@@ -3319,8 +3319,8 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,
 		return 0;
 
 	/* For Non Y-tile return 8-blocks */
-	if (fb->modifier[0] != I915_FORMAT_MOD_Y_TILED &&
-	    fb->modifier[0] != I915_FORMAT_MOD_Yf_TILED)
+	if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
+	    fb->modifier != I915_FORMAT_MOD_Yf_TILED)
 		return 8;
 
 	src_w = drm_rect_width(&intel_pstate->base.src) >> 16;
@@ -3589,7 +3589,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 		return 0;
 	}
 
-	if (apply_memory_bw_wa && fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (apply_memory_bw_wa && fb->modifier == I915_FORMAT_MOD_X_TILED)
 		latency += 15;
 
 	width = drm_rect_width(&intel_pstate->base.src) >> 16;
@@ -3625,12 +3625,12 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	}
 
 	plane_bytes_per_line = width * cpp;
-	if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
-	    fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
+	if (fb->modifier == I915_FORMAT_MOD_Y_TILED ||
+	    fb->modifier == I915_FORMAT_MOD_Yf_TILED) {
 		plane_blocks_per_line =
 		      DIV_ROUND_UP(plane_bytes_per_line * y_min_scanlines, 512);
 		plane_blocks_per_line /= y_min_scanlines;
-	} else if (fb->modifier[0] == DRM_FORMAT_MOD_NONE) {
+	} else if (fb->modifier == DRM_FORMAT_MOD_NONE) {
 		plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512)
 					+ 1;
 	} else {
@@ -3647,8 +3647,8 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	if (apply_memory_bw_wa)
 		y_tile_minimum *= 2;
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
-	    fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
+	if (fb->modifier == I915_FORMAT_MOD_Y_TILED ||
+	    fb->modifier == I915_FORMAT_MOD_Yf_TILED) {
 		selected_result = max(method2, y_tile_minimum);
 	} else {
 		if ((cpp * cstate->base.adjusted_mode.crtc_htotal / 512 < 1) &&
@@ -3664,8 +3664,8 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	res_lines = DIV_ROUND_UP(selected_result, plane_blocks_per_line);
 
 	if (level >= 1 && level <= 7) {
-		if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
-		    fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
+		if (fb->modifier == I915_FORMAT_MOD_Y_TILED ||
+		    fb->modifier == I915_FORMAT_MOD_Yf_TILED) {
 			res_blocks += y_tile_minimum;
 			res_lines += y_min_scanlines;
 		} else {

drivers/gpu/drm/i915/intel_sprite.c

@@ -229,7 +229,7 @@ skl_update_plane(struct drm_plane *drm_plane,
 		PLANE_CTL_PIPE_CSC_ENABLE;
 
 	plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
-	plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
+	plane_ctl |= skl_plane_ctl_tiling(fb->modifier);
 
 	plane_ctl |= skl_plane_ctl_rotation(rotation);
 
@@ -424,7 +424,7 @@ vlv_update_plane(struct drm_plane *dplane,
 	 */
 	sprctl |= SP_GAMMA_ENABLE;
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		sprctl |= SP_TILED;
 
 	/* Sizes are 0 based */
@@ -460,7 +460,7 @@ vlv_update_plane(struct drm_plane *dplane,
 	I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
 	I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x);
 	else
 		I915_WRITE(SPLINOFF(pipe, plane), linear_offset);
@@ -543,7 +543,7 @@ ivb_update_plane(struct drm_plane *plane,
 	 */
 	sprctl |= SPRITE_GAMMA_ENABLE;
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		sprctl |= SPRITE_TILED;
 
 	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
@@ -596,7 +596,7 @@ ivb_update_plane(struct drm_plane *plane,
 	 * register */
 	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
 		I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
-	else if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	else if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
 	else
 		I915_WRITE(SPRLINOFF(pipe), linear_offset);
@@ -681,7 +681,7 @@ ilk_update_plane(struct drm_plane *plane,
 	 */
 	dvscntr |= DVS_GAMMA_ENABLE;
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		dvscntr |= DVS_TILED;
 
 	if (IS_GEN6(dev_priv))
@@ -723,7 +723,7 @@ ilk_update_plane(struct drm_plane *plane,
 	I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_X_TILED)
+	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
 		I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
 	else
 		I915_WRITE(DVSLINOFF(pipe), linear_offset);

drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c

@@ -40,7 +40,7 @@ enum mdp4_frame_format mdp4_get_frame_format(struct drm_framebuffer *fb)
 {
 	bool is_tile = false;
 
-	if (fb->modifier[1] == DRM_FORMAT_MOD_SAMSUNG_64_32_TILE)
+	if (fb->modifier == DRM_FORMAT_MOD_SAMSUNG_64_32_TILE)
 		is_tile = true;
 
 	if (fb->pixel_format == DRM_FORMAT_NV12 && is_tile)

include/drm/drm_framebuffer.h

@@ -149,12 +149,12 @@ struct drm_framebuffer {
 	 */
 	unsigned int offsets[4];
 	/**
-	 * @modifier: Data layout modifier, per buffer. This is used to describe
+	 * @modifier: Data layout modifier. This is used to describe
 	 * tiling, or also special layouts (like compression) of auxiliary
 	 * buffers. For userspace created object this is copied from
 	 * drm_mode_fb_cmd2.
 	 */
-	uint64_t modifier[4];
+	uint64_t modifier;
 	/**
 	 * @width: Logical width of the visible area of the framebuffer, in
 	 * pixels.

include/uapi/drm/drm_mode.h

@@ -408,17 +408,20 @@ struct drm_mode_fb_cmd2 {
 	 * offsets[1].  Note that offsets[0] will generally
 	 * be 0 (but this is not required).
 	 *
-	 * To accommodate tiled, compressed, etc formats, a per-plane
+	 * To accommodate tiled, compressed, etc formats, a
 	 * modifier can be specified.  The default value of zero
 	 * indicates "native" format as specified by the fourcc.
-	 * Vendor specific modifier token.  This allows, for example,
-	 * different tiling/swizzling pattern on different planes.
-	 * See discussion above of DRM_FORMAT_MOD_xxx.
+	 * Vendor specific modifier token.  Note that even though
+	 * it looks like we have a modifier per-plane, we in fact
+	 * do not. The modifier for each plane must be identical.
+	 * Thus all combinations of different data layouts for
+	 * multi plane formats must be enumerated as separate
+	 * modifiers.
 	 */
 	__u32 handles[4];
 	__u32 pitches[4]; /* pitch for each plane */
 	__u32 offsets[4]; /* offset of each plane */
-	__u64 modifier[4]; /* ie, tiling, compressed (per plane) */
+	__u64 modifier[4]; /* ie, tiling, compress */
 };
 
 #define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01