Commit bc0b8b70 authored by Matthias Brugger's avatar Matthias Brugger Committed by Benoit Cousson

ARM: dts: omap3-igep: Add uart1 and uart2 to igep boards

This is a follow-up to Javier Martinez effort adding initial
device tree support to IGEP technology devices [1].

It adds uart1 and uart2 bindings to the generic dtsi for the IGEP boards.

[1] http://www.spinics.net/lists/linux-omap/msg83409.htmlSigned-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: default avatarBenoit Cousson <benoit.cousson@linaro.org>
parent 9ad1df2b
...@@ -27,6 +27,20 @@ sound { ...@@ -27,6 +27,20 @@ sound {
}; };
&omap3_pmx_core { &omap3_pmx_core {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */
0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */
0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
>;
};
uart3_pins: pinmux_uart3_pins { uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = < pinctrl-single,pins = <
0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */
...@@ -88,6 +102,16 @@ &mmc3 { ...@@ -88,6 +102,16 @@ &mmc3 {
status = "disabled"; status = "disabled";
}; };
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 { &uart3 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>; pinctrl-0 = <&uart3_pins>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment