Merge branch 'sunxi/clk-for-4.9' into sunxi/dt-for-4.9

Documentation/devicetree/bindings/clock/sunxi-ccu.txt

@@ -2,7 +2,10 @@ Allwinner Clock Control Unit Binding
 ------------------------------------
 
 Required properties :
-- compatible: must contain one of the following compatible:
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun6i-a31-ccu"
+		- "allwinner,sun8i-a23-ccu"
+		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
 
 - reg: Must contain the registers base address and length

drivers/clk/sunxi-ng/Kconfig

 config SUNXI_CCU
 	bool "Clock support for Allwinner SoCs"
+	depends on ARCH_SUNXI || COMPILE_TEST
 	default ARCH_SUNXI
 
 if SUNXI_CCU
@@ -19,6 +20,10 @@ config SUNXI_CCU_GATE
 config SUNXI_CCU_MUX
 	bool
 
+config SUNXI_CCU_MULT
+	bool
+	select SUNXI_CCU_MUX
+
 config SUNXI_CCU_PHASE
 	bool
 
@@ -51,6 +56,40 @@ config SUNXI_CCU_MP
 
 # SoC Drivers
 
+config SUN6I_A31_CCU
+	bool "Support for the Allwinner A31/A31s CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN6I
+
+config SUN8I_A23_CCU
+	bool "Support for the Allwinner A23 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
+config SUN8I_A33_CCU
+	bool "Support for the Allwinner A33 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
 config SUN8I_H3_CCU
 	bool "Support for the Allwinner H3 CCU"
 	select SUNXI_CCU_DIV

drivers/clk/sunxi-ng/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_SUNXI_CCU_DIV)	+= ccu_div.o
 obj-$(CONFIG_SUNXI_CCU_FRAC)	+= ccu_frac.o
 obj-$(CONFIG_SUNXI_CCU_GATE)	+= ccu_gate.o
 obj-$(CONFIG_SUNXI_CCU_MUX)	+= ccu_mux.o
+obj-$(CONFIG_SUNXI_CCU_MULT)	+= ccu_mult.o
 obj-$(CONFIG_SUNXI_CCU_PHASE)	+= ccu_phase.o
 
 # Multi-factor clocks
@@ -17,4 +18,7 @@ obj-$(CONFIG_SUNXI_CCU_NM)	+= ccu_nm.o
 obj-$(CONFIG_SUNXI_CCU_MP)	+= ccu_mp.o
 
 # SoC support
+obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
+obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
+obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o

drivers/clk/sunxi-ng/ccu-sun6i-a31.h

+/*
+ * Copyright 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN6I_A31_H_
+#define _CCU_SUN6I_A31_H_
+
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+#define CLK_PLL_CPU		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO0		6
+#define CLK_PLL_VIDEO0_2X	7
+#define CLK_PLL_VE		8
+#define CLK_PLL_DDR		9
+
+/* The PLL_PERIPH clock is exported */
+
+#define CLK_PLL_PERIPH_2X	11
+#define CLK_PLL_VIDEO1		12
+#define CLK_PLL_VIDEO1_2X	13
+#define CLK_PLL_GPU		14
+#define CLK_PLL_MIPI		15
+#define CLK_PLL9		16
+#define CLK_PLL10		17
+
+/* The CPUX clock is exported */
+
+#define CLK_AXI			19
+#define CLK_AHB1		20
+#define CLK_APB1		21
+#define CLK_APB2		22
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+/* EMAC clock is not implemented */
+
+#define CLK_MDFS		107
+#define CLK_SDRAM0		108
+#define CLK_SDRAM1		109
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS0		141
+#define CLK_MBUS1		142
+
+/* Some more module clocks and external clock outputs are exported */
+
+#define CLK_NUMBER		(CLK_OUT_C + 1)
+
+#endif /* _CCU_SUN6I_A31_H_ */

drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h

+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_A23_A33_H_
+#define _CCU_SUN8I_A23_A33_H_
+
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+#define CLK_PLL_CPUX		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VIDEO_2X	7
+#define CLK_PLL_VE		8
+#define CLK_PLL_DDR0		9
+#define CLK_PLL_PERIPH		10
+#define CLK_PLL_PERIPH_2X	11
+#define CLK_PLL_GPU		12
+#define CLK_PLL_MIPI		13
+#define CLK_PLL_HSIC		14
+#define CLK_PLL_DE		15
+#define CLK_PLL_DDR1		16
+#define CLK_PLL_DDR		17
+
+/* The CPUX clock is exported */
+
+#define CLK_AXI			19
+#define CLK_AHB1		20
+#define CLK_APB1		21
+#define CLK_APB2		22
+
+/* All the bus gates are exported */
+
+/* The first part of the mod clocks is exported */
+
+#define CLK_DRAM		79
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		95
+
+/* And the last module clocks are exported */
+
+#define CLK_NUMBER		(CLK_ATS + 1)
+
+#endif /* _CCU_SUN8I_A23_A33_H_ */

drivers/clk/sunxi-ng/ccu-sun8i-h3.c

@@ -184,15 +184,15 @@ static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
 			     0);
 
 static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
+	{ .index = 1, .div = 2 },
+};
 static struct ccu_mux ahb2_clk = {
 	.mux		= {
 		.shift	= 0,
 		.width	= 1,
-
-		.fixed_prediv	= {
-			.index	= 1,
-			.div	= 2,
-		},
+		.fixed_predivs	= ahb2_fixed_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb2_fixed_predivs),
 	},
 
 	.common		= {

drivers/clk/sunxi-ng/ccu_div.h

@@ -19,10 +19,29 @@
 #include "ccu_common.h"
 #include "ccu_mux.h"
 
+/**
+ * struct _ccu_div - Internal divider description
+ * @shift: Bit offset of the divider in its register
+ * @width: Width of the divider field in its register
+ * @max: Maximum value allowed for that divider. This is the
+ *       arithmetic value, not the maximum value to be set in the
+ *       register.
+ * @flags: clk_divider flags to apply on this divider
+ * @table: Divider table pointer (if applicable)
+ *
+ * That structure represents a single divider, and is meant to be
+ * embedded in other structures representing the various clock
+ * classes.
+ *
+ * It is basically a wrapper around the clk_divider functions
+ * arguments.
+ */
 struct _ccu_div {
 	u8			shift;
 	u8			width;
 
+	u32			max;
+
 	u32			flags;
 
 	struct clk_div_table	*table;
@@ -36,14 +55,25 @@ struct _ccu_div {
 		.table	= _table,					\
 	}
 
-#define _SUNXI_CCU_DIV_FLAGS(_shift, _width, _flags)			\
-	_SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, NULL, _flags)
-
 #define _SUNXI_CCU_DIV_TABLE(_shift, _width, _table)			\
 	_SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, _table, 0)
 
+#define _SUNXI_CCU_DIV_MAX_FLAGS(_shift, _width, _max, _flags) \
+	{								\
+		.shift	= _shift,					\
+		.width	= _width,					\
+		.flags	= _flags,					\
+		.max	= _max,						\
+	}
+
+#define _SUNXI_CCU_DIV_FLAGS(_shift, _width, _flags)			\
+	_SUNXI_CCU_DIV_MAX_FLAGS(_shift, _width, 0, _flags)
+
+#define _SUNXI_CCU_DIV_MAX(_shift, _width, _max)			\
+	_SUNXI_CCU_DIV_MAX_FLAGS(_shift, _width, _max, 0)
+
 #define _SUNXI_CCU_DIV(_shift, _width)					\
-	_SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, NULL, 0)
+	_SUNXI_CCU_DIV_FLAGS(_shift, _width, 0)
 
 struct ccu_div {
 	u32			enable;
@@ -77,13 +107,16 @@ struct ccu_div {
 				      _shift, _width, _table, 0,	\
 				      _flags)
 
-#define SUNXI_CCU_M_WITH_MUX_GATE(_struct, _name, _parents, _reg,	\
-				  _mshift, _mwidth, _muxshift, _muxwidth, \
+#define SUNXI_CCU_M_WITH_MUX_TABLE_GATE(_struct, _name,			\
+					_parents, _table,		\
+					_reg,				\
+					_mshift, _mwidth,		\
+					_muxshift, _muxwidth,		\
 					_gate, _flags)			\
 	struct ccu_div _struct = {					\
 		.enable	= _gate,					\
 		.div	= _SUNXI_CCU_DIV(_mshift, _mwidth),		\
-		.mux	= SUNXI_CLK_MUX(_muxshift, _muxwidth),		\
+		.mux	= _SUNXI_CCU_MUX_TABLE(_muxshift, _muxwidth, _table), \
 		.common	= {						\
 			.reg		= _reg,				\
 			.hw.init	= CLK_HW_INIT_PARENTS(_name,	\
@@ -93,11 +126,22 @@ struct ccu_div {
 		},							\
 	}
 
+#define SUNXI_CCU_M_WITH_MUX_GATE(_struct, _name, _parents, _reg,	\
+				  _mshift, _mwidth, _muxshift, _muxwidth, \
+				  _gate, _flags)			\
+	SUNXI_CCU_M_WITH_MUX_TABLE_GATE(_struct, _name,			\
+					_parents, NULL,			\
+					_reg, _mshift, _mwidth,		\
+					_muxshift, _muxwidth,		\
+					_gate, _flags)
+
 #define SUNXI_CCU_M_WITH_MUX(_struct, _name, _parents, _reg,		\
 			     _mshift, _mwidth, _muxshift, _muxwidth,	\
 			     _flags)					\
-	SUNXI_CCU_M_WITH_MUX_GATE(_struct, _name, _parents, _reg,	\
-				  _mshift, _mwidth, _muxshift, _muxwidth, \
+	SUNXI_CCU_M_WITH_MUX_TABLE_GATE(_struct, _name,			\
+					_parents, NULL,			\
+					_reg, _mshift, _mwidth,		\
+					_muxshift, _muxwidth,		\
 					0, _flags)
 
 

drivers/clk/sunxi-ng/ccu_mp.c

@@ -21,9 +21,9 @@ static void ccu_mp_find_best(unsigned long parent, unsigned long rate,
 	unsigned int best_m = 0, best_p = 0;
 	unsigned int _m, _p;
 
-	for (_p = 0; _p <= max_p; _p++) {
+	for (_p = 1; _p <= max_p; _p <<= 1) {
 		for (_m = 1; _m <= max_m; _m++) {
-			unsigned long tmp_rate = (parent >> _p) / _m;
+			unsigned long tmp_rate = parent / _p / _m;
 
 			if (tmp_rate > rate)
 				continue;
@@ -46,13 +46,15 @@ static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
 				       void *data)
 {
 	struct ccu_mp *cmp = data;
+	unsigned int max_m, max_p;
 	unsigned int m, p;
 
-	ccu_mp_find_best(parent_rate, rate,
-			 1 << cmp->m.width, (1 << cmp->p.width) - 1,
-			 &m, &p);
+	max_m = cmp->m.max ?: 1 << cmp->m.width;
+	max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
 
-	return (parent_rate >> p) / m;
+	ccu_mp_find_best(parent_rate, rate, max_m, max_p, &m, &p);
+
+	return parent_rate / p / m;
 }
 
 static void ccu_mp_disable(struct clk_hw *hw)
@@ -108,13 +110,14 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct ccu_mp *cmp = hw_to_ccu_mp(hw);
 	unsigned long flags;
+	unsigned int max_m, max_p;
 	unsigned int m, p;
 	u32 reg;
 
-	ccu_mp_find_best(parent_rate, rate,
-			 1 << cmp->m.width, (1 << cmp->p.width) - 1,
-			 &m, &p);
+	max_m = cmp->m.max ?: 1 << cmp->m.width;
+	max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
 
+	ccu_mp_find_best(parent_rate, rate, max_m, max_p, &m, &p);
 
 	spin_lock_irqsave(cmp->common.lock, flags);
 
@@ -122,7 +125,7 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
 	reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
 	reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
 
-	writel(reg | (p << cmp->p.shift) | ((m - 1) << cmp->m.shift),
+	writel(reg | (ilog2(p) << cmp->p.shift) | ((m - 1) << cmp->m.shift),
 	       cmp->common.base + cmp->common.reg);
 
 	spin_unlock_irqrestore(cmp->common.lock, flags);

drivers/clk/sunxi-ng/ccu_mp.h

@@ -44,7 +44,7 @@ struct ccu_mp {
 		.enable	= _gate,					\
 		.m	= _SUNXI_CCU_DIV(_mshift, _mwidth),		\
 		.p	= _SUNXI_CCU_DIV(_pshift, _pwidth),		\
-		.mux	= SUNXI_CLK_MUX(_muxshift, _muxwidth),		\
+		.mux	= _SUNXI_CCU_MUX(_muxshift, _muxwidth),		\
 		.common	= {						\
 			.reg		= _reg,				\
 			.hw.init	= CLK_HW_INIT_PARENTS(_name,	\

drivers/clk/sunxi-ng/ccu_mult.c

+/*
+ * Copyright (C) 2016 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "ccu_gate.h"
+#include "ccu_mult.h"
+
+static void ccu_mult_find_best(unsigned long parent, unsigned long rate,
+			       unsigned int max_n, unsigned int *n)
+{
+	*n = rate / parent;
+}
+
+static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux,
+					unsigned long parent_rate,
+					unsigned long rate,
+					void *data)
+{
+	struct ccu_mult *cm = data;
+	unsigned int n;
+
+	ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
+
+	return parent_rate * n;
+}
+
+static void ccu_mult_disable(struct clk_hw *hw)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+	return ccu_gate_helper_disable(&cm->common, cm->enable);
+}
+
+static int ccu_mult_enable(struct clk_hw *hw)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+	return ccu_gate_helper_enable(&cm->common, cm->enable);
+}
+
+static int ccu_mult_is_enabled(struct clk_hw *hw)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+	return ccu_gate_helper_is_enabled(&cm->common, cm->enable);
+}
+
+static unsigned long ccu_mult_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+	unsigned long val;
+	u32 reg;
+
+	reg = readl(cm->common.base + cm->common.reg);
+	val = reg >> cm->mult.shift;
+	val &= (1 << cm->mult.width) - 1;
+
+	ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
+						&parent_rate);
+
+	return parent_rate * (val + 1);
+}
+
+static int ccu_mult_determine_rate(struct clk_hw *hw,
+				struct clk_rate_request *req)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+	return ccu_mux_helper_determine_rate(&cm->common, &cm->mux,
+					     req, ccu_mult_round_rate, cm);
+}
+
+static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
+			   unsigned long parent_rate)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+	unsigned long flags;
+	unsigned int n;
+	u32 reg;
+
+	ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
+						&parent_rate);
+
+	ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
+
+	spin_lock_irqsave(cm->common.lock, flags);
+
+	reg = readl(cm->common.base + cm->common.reg);
+	reg &= ~GENMASK(cm->mult.width + cm->mult.shift - 1, cm->mult.shift);
+
+	writel(reg | ((n - 1) << cm->mult.shift),
+	       cm->common.base + cm->common.reg);
+
+	spin_unlock_irqrestore(cm->common.lock, flags);
+
+	return 0;
+}
+
+static u8 ccu_mult_get_parent(struct clk_hw *hw)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+	return ccu_mux_helper_get_parent(&cm->common, &cm->mux);
+}
+
+static int ccu_mult_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct ccu_mult *cm = hw_to_ccu_mult(hw);
+
+	return ccu_mux_helper_set_parent(&cm->common, &cm->mux, index);
+}
+
+const struct clk_ops ccu_mult_ops = {
+	.disable	= ccu_mult_disable,
+	.enable		= ccu_mult_enable,
+	.is_enabled	= ccu_mult_is_enabled,
+
+	.get_parent	= ccu_mult_get_parent,
+	.set_parent	= ccu_mult_set_parent,
+
+	.determine_rate	= ccu_mult_determine_rate,
+	.recalc_rate	= ccu_mult_recalc_rate,
+	.set_rate	= ccu_mult_set_rate,
+};

drivers/clk/sunxi-ng/ccu_mult.h

 #ifndef _CCU_MULT_H_
 #define _CCU_MULT_H_
 
+#include "ccu_common.h"
+#include "ccu_mux.h"
+
 struct _ccu_mult {
 	u8	shift;
 	u8	width;
@@ -12,4 +15,36 @@ struct _ccu_mult {
 		.width	= _width,		\
 	}
 
+struct ccu_mult {
+	u32			enable;
+
+	struct _ccu_mult	mult;
+	struct ccu_mux_internal	mux;
+	struct ccu_common	common;
+};
+
+#define SUNXI_CCU_N_WITH_GATE_LOCK(_struct, _name, _parent, _reg,	\
+				   _mshift, _mwidth, _gate, _lock,	\
+				   _flags)				\
+	struct ccu_mult _struct = {					\
+		.enable	= _gate,					\
+		.mult	= _SUNXI_CCU_MULT(_mshift, _mwidth),		\
+		.common	= {						\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &ccu_mult_ops,	\
+						      _flags),		\
+		},							\
+	}
+
+static inline struct ccu_mult *hw_to_ccu_mult(struct clk_hw *hw)
+{
+	struct ccu_common *common = hw_to_ccu_common(hw);
+
+	return container_of(common, struct ccu_mult, common);
+}
+
+extern const struct clk_ops ccu_mult_ops;
+
 #endif /* _CCU_MULT_H_ */

drivers/clk/sunxi-ng/ccu_mux.c

@@ -8,7 +8,9 @@
  * the License, or (at your option) any later version.
  */
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/delay.h>
 
 #include "ccu_gate.h"
 #include "ccu_mux.h"
@@ -18,8 +20,9 @@ void ccu_mux_helper_adjust_parent_for_prediv(struct ccu_common *common,
 					     int parent_index,
 					     unsigned long *parent_rate)
 {
-	u8 prediv = 1;
+	u16 prediv = 1;
 	u32 reg;
+	int i;
 
 	if (!((common->features & CCU_FEATURE_FIXED_PREDIV) ||
 	      (common->features & CCU_FEATURE_VARIABLE_PREDIV)))
@@ -32,8 +35,9 @@ void ccu_mux_helper_adjust_parent_for_prediv(struct ccu_common *common,
 	}
 
 	if (common->features & CCU_FEATURE_FIXED_PREDIV)
-		if (parent_index == cm->fixed_prediv.index)
-			prediv = cm->fixed_prediv.div;
+		for (i = 0; i < cm->n_predivs; i++)
+			if (parent_index == cm->fixed_predivs[i].index)
+				prediv = cm->fixed_predivs[i].div;
 
 	if (common->features & CCU_FEATURE_VARIABLE_PREDIV)
 		if (parent_index == cm->variable_prediv.index) {
@@ -107,6 +111,15 @@ u8 ccu_mux_helper_get_parent(struct ccu_common *common,
 	parent = reg >> cm->shift;
 	parent &= (1 << cm->width) - 1;
 
+	if (cm->table) {
+		int num_parents = clk_hw_get_num_parents(&common->hw);
+		int i;
+
+		for (i = 0; i < num_parents; i++)
+			if (cm->table[i] == parent)
+				return i;
+	}
+
 	return parent;
 }
 
@@ -117,6 +130,9 @@ int ccu_mux_helper_set_parent(struct ccu_common *common,
 	unsigned long flags;
 	u32 reg;
 
+	if (cm->table)
+		index = cm->table[index];
+
 	spin_lock_irqsave(common->lock, flags);
 
 	reg = readl(common->base + common->reg);
@@ -185,3 +201,37 @@ const struct clk_ops ccu_mux_ops = {
 	.determine_rate	= __clk_mux_determine_rate,
 	.recalc_rate	= ccu_mux_recalc_rate,
 };
+
+/*
+ * This clock notifier is called when the frequency of the of the parent
+ * PLL clock is to be changed. The idea is to switch the parent to a
+ * stable clock, such as the main oscillator, while the PLL frequency
+ * stabilizes.
+ */
+static int ccu_mux_notifier_cb(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct ccu_mux_nb *mux = to_ccu_mux_nb(nb);
+	int ret = 0;
+
+	if (event == PRE_RATE_CHANGE) {
+		mux->original_index = ccu_mux_helper_get_parent(mux->common,
+								mux->cm);
+		ret = ccu_mux_helper_set_parent(mux->common, mux->cm,
+						mux->bypass_index);
+	} else if (event == POST_RATE_CHANGE) {
+		ret = ccu_mux_helper_set_parent(mux->common, mux->cm,
+						mux->original_index);
+	}
+
+	udelay(mux->delay_us);
+
+	return notifier_from_errno(ret);
+}
+
+int ccu_mux_notifier_register(struct clk *clk, struct ccu_mux_nb *mux_nb)
+{
+	mux_nb->clk_nb.notifier_call = ccu_mux_notifier_cb;
+
+	return clk_notifier_register(clk, &mux_nb->clk_nb);
+}

drivers/clk/sunxi-ng/ccu_mux.h

@@ -5,14 +5,18 @@
 
 #include "ccu_common.h"
 
+struct ccu_mux_fixed_prediv {
+	u8	index;
+	u16	div;
+};
+
 struct ccu_mux_internal {
 	u8		shift;
 	u8		width;
+	const u8	*table;
 
-	struct {
-		u8	index;
-		u8	div;
-	} fixed_prediv;
+	const struct ccu_mux_fixed_prediv	*fixed_predivs;
+	u8		n_predivs;
 
 	struct {
 		u8	index;
@@ -21,12 +25,16 @@ struct ccu_mux_internal {
 	} variable_prediv;
 };
 
-#define SUNXI_CLK_MUX(_shift, _width)	\
+#define _SUNXI_CCU_MUX_TABLE(_shift, _width, _table)	\
 	{						\
 		.shift	= _shift,			\
 		.width	= _width,			\
+		.table	= _table,			\
 	}
 
+#define _SUNXI_CCU_MUX(_shift, _width) \
+	_SUNXI_CCU_MUX_TABLE(_shift, _width, NULL)
+
 struct ccu_mux {
 	u16			reg;
 	u32			enable;
@@ -35,9 +43,12 @@ struct ccu_mux {
 	struct ccu_common	common;
 };
 
-#define SUNXI_CCU_MUX(_struct, _name, _parents, _reg, _shift, _width, _flags) \
+#define SUNXI_CCU_MUX_TABLE_WITH_GATE(_struct, _name, _parents, _table,	\
+				     _reg, _shift, _width, _gate,	\
+				     _flags)				\
 	struct ccu_mux _struct = {					\
-		.mux	= SUNXI_CLK_MUX(_shift, _width),		\
+		.enable	= _gate,					\
+		.mux	= _SUNXI_CCU_MUX_TABLE(_shift, _width, _table),	\
 		.common	= {						\
 			.reg		= _reg,				\
 			.hw.init	= CLK_HW_INIT_PARENTS(_name,	\
@@ -49,17 +60,14 @@ struct ccu_mux {
 
 #define SUNXI_CCU_MUX_WITH_GATE(_struct, _name, _parents, _reg,		\
 				_shift, _width, _gate, _flags)		\
-	struct ccu_mux _struct = {					\
-		.enable	= _gate,					\
-		.mux	= SUNXI_CLK_MUX(_shift, _width),		\
-		.common	= {						\
-			.reg		= _reg,				\
-			.hw.init	= CLK_HW_INIT_PARENTS(_name,	\
-							      _parents, \
-							      &ccu_mux_ops, \
-							      _flags),	\
-		}							\
-	}
+	SUNXI_CCU_MUX_TABLE_WITH_GATE(_struct, _name, _parents, NULL,	\
+				      _reg, _shift, _width, _gate,	\
+				      _flags)
+
+#define SUNXI_CCU_MUX(_struct, _name, _parents, _reg, _shift, _width,	\
+		      _flags)						\
+	SUNXI_CCU_MUX_TABLE_WITH_GATE(_struct, _name, _parents, NULL,	\
+				      _reg, _shift, _width, 0, _flags)
 
 static inline struct ccu_mux *hw_to_ccu_mux(struct clk_hw *hw)
 {
@@ -88,4 +96,18 @@ int ccu_mux_helper_set_parent(struct ccu_common *common,
 			      struct ccu_mux_internal *cm,
 			      u8 index);
 
+struct ccu_mux_nb {
+	struct notifier_block	clk_nb;
+	struct ccu_common	*common;
+	struct ccu_mux_internal	*cm;
+
+	u32	delay_us;	/* How many us to wait after reparenting */
+	u8	bypass_index;	/* Which parent to temporarily use */
+	u8	original_index;	/* This is set by the notifier callback */
+};
+
+#define to_ccu_mux_nb(_nb) container_of(_nb, struct ccu_mux_nb, clk_nb)
+
+int ccu_mux_notifier_register(struct clk *clk, struct ccu_mux_nb *mux_nb);
+
 #endif /* _CCU_MUX_H_ */

drivers/clk/sunxi-ng/ccu_nkm.c

@@ -93,19 +93,30 @@ static unsigned long ccu_nkm_recalc_rate(struct clk_hw *hw,
 	return parent_rate * (n + 1) * (k + 1) / (m + 1);
 }
 
-static long ccu_nkm_round_rate(struct clk_hw *hw, unsigned long rate,
-			      unsigned long *parent_rate)
+static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
+					unsigned long parent_rate,
+					unsigned long rate,
+					void *data)
 {
-	struct ccu_nkm *nkm = hw_to_ccu_nkm(hw);
+	struct ccu_nkm *nkm = data;
 	struct _ccu_nkm _nkm;
 
 	_nkm.max_n = 1 << nkm->n.width;
 	_nkm.max_k = 1 << nkm->k.width;
-	_nkm.max_m = 1 << nkm->m.width;
+	_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
 
-	ccu_nkm_find_best(*parent_rate, rate, &_nkm);
+	ccu_nkm_find_best(parent_rate, rate, &_nkm);
 
-	return *parent_rate * _nkm.n * _nkm.k / _nkm.m;
+	return parent_rate * _nkm.n * _nkm.k / _nkm.m;
+}
+
+static int ccu_nkm_determine_rate(struct clk_hw *hw,
+				  struct clk_rate_request *req)
+{
+	struct ccu_nkm *nkm = hw_to_ccu_nkm(hw);
+
+	return ccu_mux_helper_determine_rate(&nkm->common, &nkm->mux,
+					     req, ccu_nkm_round_rate, nkm);
 }
 
 static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -118,7 +129,7 @@ static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	_nkm.max_n = 1 << nkm->n.width;
 	_nkm.max_k = 1 << nkm->k.width;
-	_nkm.max_m = 1 << nkm->m.width;
+	_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
 
 	ccu_nkm_find_best(parent_rate, rate, &_nkm);
 
@@ -142,12 +153,29 @@ static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
+static u8 ccu_nkm_get_parent(struct clk_hw *hw)
+{
+	struct ccu_nkm *nkm = hw_to_ccu_nkm(hw);
+
+	return ccu_mux_helper_get_parent(&nkm->common, &nkm->mux);
+}
+
+static int ccu_nkm_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct ccu_nkm *nkm = hw_to_ccu_nkm(hw);
+
+	return ccu_mux_helper_set_parent(&nkm->common, &nkm->mux, index);
+}
+
 const struct clk_ops ccu_nkm_ops = {
 	.disable	= ccu_nkm_disable,
 	.enable		= ccu_nkm_enable,
 	.is_enabled	= ccu_nkm_is_enabled,
 
+	.get_parent	= ccu_nkm_get_parent,
+	.set_parent	= ccu_nkm_set_parent,
+
+	.determine_rate	= ccu_nkm_determine_rate,
 	.recalc_rate	= ccu_nkm_recalc_rate,
-	.round_rate	= ccu_nkm_round_rate,
 	.set_rate	= ccu_nkm_set_rate,
 };

drivers/clk/sunxi-ng/ccu_nkm.h

@@ -32,10 +32,33 @@ struct ccu_nkm {
 	struct _ccu_mult	n;
 	struct _ccu_mult	k;
 	struct _ccu_div		m;
+	struct ccu_mux_internal	mux;
 
 	struct ccu_common	common;
 };
 
+#define SUNXI_CCU_NKM_WITH_MUX_GATE_LOCK(_struct, _name, _parents, _reg, \
+					 _nshift, _nwidth,		\
+					 _kshift, _kwidth,		\
+					 _mshift, _mwidth,		\
+					 _muxshift, _muxwidth,		\
+					 _gate, _lock, _flags)		\
+	struct ccu_nkm _struct = {					\
+		.enable		= _gate,				\
+		.lock		= _lock,				\
+		.k		= _SUNXI_CCU_MULT(_kshift, _kwidth),	\
+		.n		= _SUNXI_CCU_MULT(_nshift, _nwidth),	\
+		.m		= _SUNXI_CCU_DIV(_mshift, _mwidth),	\
+		.mux		= _SUNXI_CCU_MUX(_muxshift, _muxwidth),	\
+		.common		= {					\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT_PARENTS(_name,	\
+						      _parents,		\
+						      &ccu_nkm_ops,	\
+						      _flags),		\
+		},							\
+	}
+
 #define SUNXI_CCU_NKM_WITH_GATE_LOCK(_struct, _name, _parent, _reg,	\
 				     _nshift, _nwidth,			\
 				     _kshift, _kwidth,			\

drivers/clk/sunxi-ng/ccu_nkmp.c

@@ -29,14 +29,14 @@ static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
 	unsigned long _n, _k, _m, _p;
 
 	for (_k = 1; _k <= nkmp->max_k; _k++) {
-		for (_p = 0; _p <= nkmp->max_p; _p++) {
+		for (_p = 1; _p <= nkmp->max_p; _p <<= 1) {
 			unsigned long tmp_rate;
 
-			rational_best_approximation(rate / _k, parent >> _p,
+			rational_best_approximation(rate / _k, parent / _p,
 						    nkmp->max_n, nkmp->max_m,
 						    &_n, &_m);
 
-			tmp_rate = (parent * _n * _k >> _p) / _m;
+			tmp_rate = parent * _n * _k / (_m * _p);
 
 			if (tmp_rate > rate)
 				continue;
@@ -110,13 +110,12 @@ static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
 
 	_nkmp.max_n = 1 << nkmp->n.width;
 	_nkmp.max_k = 1 << nkmp->k.width;
-	_nkmp.max_m = 1 << nkmp->m.width;
-	_nkmp.max_p = (1 << nkmp->p.width) - 1;
+	_nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
+	_nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
 
-	ccu_nkmp_find_best(*parent_rate, rate,
-			   &_nkmp);
+	ccu_nkmp_find_best(*parent_rate, rate, &_nkmp);
 
-	return (*parent_rate * _nkmp.n * _nkmp.k >> _nkmp.p) / _nkmp.m;
+	return *parent_rate * _nkmp.n * _nkmp.k / (_nkmp.m * _nkmp.p);
 }
 
 static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -129,8 +128,8 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	_nkmp.max_n = 1 << nkmp->n.width;
 	_nkmp.max_k = 1 << nkmp->k.width;
-	_nkmp.max_m = 1 << nkmp->m.width;
-	_nkmp.max_p = (1 << nkmp->p.width) - 1;
+	_nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
+	_nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
 
 	ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
 
@@ -145,7 +144,7 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
 	reg |= (_nkmp.n - 1) << nkmp->n.shift;
 	reg |= (_nkmp.k - 1) << nkmp->k.shift;
 	reg |= (_nkmp.m - 1) << nkmp->m.shift;
-	reg |= _nkmp.p << nkmp->p.shift;
+	reg |= ilog2(_nkmp.p) << nkmp->p.shift;
 
 	writel(reg, nkmp->common.base + nkmp->common.reg);
 

drivers/clk/sunxi-ng/ccu_nm.c

@@ -61,11 +61,13 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 			      unsigned long *parent_rate)
 {
 	struct ccu_nm *nm = hw_to_ccu_nm(hw);
+	unsigned long max_n, max_m;
 	unsigned long n, m;
 
-	rational_best_approximation(rate, *parent_rate,
-				    1 << nm->n.width, 1 << nm->m.width,
-				    &n, &m);
+	max_n = 1 << nm->n.width;
+	max_m = nm->m.max ?: 1 << nm->m.width;
+
+	rational_best_approximation(rate, *parent_rate, max_n, max_m, &n, &m);
 
 	return *parent_rate * n / m;
 }
@@ -75,6 +77,7 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct ccu_nm *nm = hw_to_ccu_nm(hw);
 	unsigned long flags;
+	unsigned long max_n, max_m;
 	unsigned long n, m;
 	u32 reg;
 
@@ -83,9 +86,10 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 	else
 		ccu_frac_helper_disable(&nm->common, &nm->frac);
 
-	rational_best_approximation(rate, parent_rate,
-				    1 << nm->n.width, 1 << nm->m.width,
-				    &n, &m);
+	max_n = 1 << nm->n.width;
+	max_m = nm->m.max ?: 1 << nm->m.width;
+
+	rational_best_approximation(rate, parent_rate, max_n, max_m, &n, &m);
 
 	spin_lock_irqsave(nm->common.lock, flags);
 

include/dt-bindings/clock/sun6i-a31-ccu.h

+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN6I_A31_H_
+#define _DT_BINDINGS_CLK_SUN6I_A31_H_
+
+#define CLK_PLL_PERIPH		10
+
+#define CLK_CPU			18
+
+#define CLK_AHB1_MIPIDSI	23
+#define CLK_AHB1_SS		24
+#define CLK_AHB1_DMA		25
+#define CLK_AHB1_MMC0		26
+#define CLK_AHB1_MMC1		27
+#define CLK_AHB1_MMC2		28
+#define CLK_AHB1_MMC3		29
+#define CLK_AHB1_NAND1		30
+#define CLK_AHB1_NAND0		31
+#define CLK_AHB1_SDRAM		32
+#define CLK_AHB1_EMAC		33
+#define CLK_AHB1_TS		34
+#define CLK_AHB1_HSTIMER	35
+#define CLK_AHB1_SPI0		36
+#define CLK_AHB1_SPI1		37
+#define CLK_AHB1_SPI2		38
+#define CLK_AHB1_SPI3		39
+#define CLK_AHB1_OTG		40
+#define CLK_AHB1_EHCI0		41
+#define CLK_AHB1_EHCI1		42
+#define CLK_AHB1_OHCI0		43
+#define CLK_AHB1_OHCI1		44
+#define CLK_AHB1_OHCI2		45
+#define CLK_AHB1_VE		46
+#define CLK_AHB1_LCD0		47
+#define CLK_AHB1_LCD1		48
+#define CLK_AHB1_CSI		49
+#define CLK_AHB1_HDMI		50
+#define CLK_AHB1_BE0		51
+#define CLK_AHB1_BE1		52
+#define CLK_AHB1_FE0		53
+#define CLK_AHB1_FE1		54
+#define CLK_AHB1_MP		55
+#define CLK_AHB1_GPU		56
+#define CLK_AHB1_DEU0		57
+#define CLK_AHB1_DEU1		58
+#define CLK_AHB1_DRC0		59
+#define CLK_AHB1_DRC1		60
+
+#define CLK_APB1_CODEC		61
+#define CLK_APB1_SPDIF		62
+#define CLK_APB1_DIGITAL_MIC	63
+#define CLK_APB1_PIO		64
+#define CLK_APB1_DAUDIO0	65
+#define CLK_APB1_DAUDIO1	66
+
+#define CLK_APB2_I2C0		67
+#define CLK_APB2_I2C1		68
+#define CLK_APB2_I2C2		69
+#define CLK_APB2_I2C3		70
+#define CLK_APB2_UART0		71
+#define CLK_APB2_UART1		72
+#define CLK_APB2_UART2		73
+#define CLK_APB2_UART3		74
+#define CLK_APB2_UART4		75
+#define CLK_APB2_UART5		76
+
+#define CLK_NAND0		77
+#define CLK_NAND1		78
+#define CLK_MMC0		79
+#define CLK_MMC0_SAMPLE		80
+#define CLK_MMC0_OUTPUT		81
+#define CLK_MMC1		82
+#define CLK_MMC1_SAMPLE		83
+#define CLK_MMC1_OUTPUT		84
+#define CLK_MMC2		85
+#define CLK_MMC2_SAMPLE		86
+#define CLK_MMC2_OUTPUT		87
+#define CLK_MMC3		88
+#define CLK_MMC3_SAMPLE		89
+#define CLK_MMC3_OUTPUT		90
+#define CLK_TS			91
+#define CLK_SS			92
+#define CLK_SPI0		93
+#define CLK_SPI1		94
+#define CLK_SPI2		95
+#define CLK_SPI3		96
+#define CLK_DAUDIO0		97
+#define CLK_DAUDIO1		98
+#define CLK_SPDIF		99
+#define CLK_USB_PHY0		100
+#define CLK_USB_PHY1		101
+#define CLK_USB_PHY2		102
+#define CLK_USB_OHCI0		103
+#define CLK_USB_OHCI1		104
+#define CLK_USB_OHCI2		105
+
+#define CLK_DRAM_VE		110
+#define CLK_DRAM_CSI_ISP	111
+#define CLK_DRAM_TS		112
+#define CLK_DRAM_DRC0		113
+#define CLK_DRAM_DRC1		114
+#define CLK_DRAM_DEU0		115
+#define CLK_DRAM_DEU1		116
+#define CLK_DRAM_FE0		117
+#define CLK_DRAM_FE1		118
+#define CLK_DRAM_BE0		119
+#define CLK_DRAM_BE1		120
+#define CLK_DRAM_MP		121
+
+#define CLK_BE0			122
+#define CLK_BE1			123
+#define CLK_FE0			124
+#define CLK_FE1			125
+#define CLK_MP			126
+#define CLK_LCD0_CH0		127
+#define CLK_LCD1_CH0		128
+#define CLK_LCD0_CH1		129
+#define CLK_LCD1_CH1		130
+#define CLK_CSI0_SCLK		131
+#define CLK_CSI0_MCLK		132
+#define CLK_CSI1_MCLK		133
+#define CLK_VE			134
+#define CLK_CODEC		135
+#define CLK_AVS			136
+#define CLK_DIGITAL_MIC		137
+#define CLK_HDMI		138
+#define CLK_HDMI_DDC		139
+#define CLK_PS			140
+
+#define CLK_MIPI_DSI		143
+#define CLK_MIPI_DSI_DPHY	144
+#define CLK_MIPI_CSI_DPHY	145
+#define CLK_IEP_DRC0		146
+#define CLK_IEP_DRC1		147
+#define CLK_IEP_DEU0		148
+#define CLK_IEP_DEU1		149
+#define CLK_GPU_CORE		150
+#define CLK_GPU_MEMORY		151
+#define CLK_GPU_HYD		152
+#define CLK_ATS			153
+#define CLK_TRACE		154
+
+#define CLK_OUT_A		155
+#define CLK_OUT_B		156
+#define CLK_OUT_C		157
+
+#endif /* _DT_BINDINGS_CLK_SUN6I_A31_H_ */

include/dt-bindings/clock/sun8i-a23-a33-ccu.h

+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
+#define _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
+
+#define CLK_CPUX		18
+
+#define CLK_BUS_MIPI_DSI	23
+#define CLK_BUS_SS		24
+#define CLK_BUS_DMA		25
+#define CLK_BUS_MMC0		26
+#define CLK_BUS_MMC1		27
+#define CLK_BUS_MMC2		28
+#define CLK_BUS_NAND		29
+#define CLK_BUS_DRAM		30
+#define CLK_BUS_HSTIMER		31
+#define CLK_BUS_SPI0		32
+#define CLK_BUS_SPI1		33
+#define CLK_BUS_OTG		34
+#define CLK_BUS_EHCI		35
+#define CLK_BUS_OHCI		36
+#define CLK_BUS_VE		37
+#define CLK_BUS_LCD		38
+#define CLK_BUS_CSI		39
+#define CLK_BUS_DE_BE		40
+#define CLK_BUS_DE_FE		41
+#define CLK_BUS_GPU		42
+#define CLK_BUS_MSGBOX		43
+#define CLK_BUS_SPINLOCK	44
+#define CLK_BUS_DRC		45
+#define CLK_BUS_SAT		46
+#define CLK_BUS_CODEC		47
+#define CLK_BUS_PIO		48
+#define CLK_BUS_I2S0		49
+#define CLK_BUS_I2S1		50
+#define CLK_BUS_I2C0		51
+#define CLK_BUS_I2C1		52
+#define CLK_BUS_I2C2		53
+#define CLK_BUS_UART0		54
+#define CLK_BUS_UART1		55
+#define CLK_BUS_UART2		56
+#define CLK_BUS_UART3		57
+#define CLK_BUS_UART4		58
+#define CLK_NAND		59
+#define CLK_MMC0		60
+#define CLK_MMC0_SAMPLE		61
+#define CLK_MMC0_OUTPUT		62
+#define CLK_MMC1		63
+#define CLK_MMC1_SAMPLE		64
+#define CLK_MMC1_OUTPUT		65
+#define CLK_MMC2		66
+#define CLK_MMC2_SAMPLE		67
+#define CLK_MMC2_OUTPUT		68
+#define CLK_SS			69
+#define CLK_SPI0		70
+#define CLK_SPI1		71
+#define CLK_I2S0		72
+#define CLK_I2S1		73
+#define CLK_USB_PHY0		74
+#define CLK_USB_PHY1		75
+#define CLK_USB_HSIC		76
+#define CLK_USB_HSIC_12M	77
+#define CLK_USB_OHCI		78
+
+#define CLK_DRAM_VE		80
+#define CLK_DRAM_CSI		81
+#define CLK_DRAM_DRC		82
+#define CLK_DRAM_DE_FE		83
+#define CLK_DRAM_DE_BE		84
+#define CLK_DE_BE		85
+#define CLK_DE_FE		86
+#define CLK_LCD_CH0		87
+#define CLK_LCD_CH1		88
+#define CLK_CSI_SCLK		89
+#define CLK_CSI_MCLK		90
+#define CLK_VE			91
+#define CLK_AC_DIG		92
+#define CLK_AC_DIG_4X		93
+#define CLK_AVS			94
+
+#define CLK_DSI_SCLK		96
+#define CLK_DSI_DPHY		97
+#define CLK_DRC			98
+#define CLK_GPU			99
+#define CLK_ATS			100
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_A23_A33_H_ */

include/dt-bindings/reset/sun6i-a31-ccu.h

+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN6I_A31_H_
+#define _DT_BINDINGS_RST_SUN6I_A31_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_PHY2		2
+
+#define RST_AHB1_MIPI_DSI	3
+#define RST_AHB1_SS		4
+#define RST_AHB1_DMA		5
+#define RST_AHB1_MMC0		6
+#define RST_AHB1_MMC1		7
+#define RST_AHB1_MMC2		8
+#define RST_AHB1_MMC3		9
+#define RST_AHB1_NAND1		10
+#define RST_AHB1_NAND0		11
+#define RST_AHB1_SDRAM		12
+#define RST_AHB1_EMAC		13
+#define RST_AHB1_TS		14
+#define RST_AHB1_HSTIMER	15
+#define RST_AHB1_SPI0		16
+#define RST_AHB1_SPI1		17
+#define RST_AHB1_SPI2		18
+#define RST_AHB1_SPI3		19
+#define RST_AHB1_OTG		20
+#define RST_AHB1_EHCI0		21
+#define RST_AHB1_EHCI1		22
+#define RST_AHB1_OHCI0		23
+#define RST_AHB1_OHCI1		24
+#define RST_AHB1_OHCI2		25
+#define RST_AHB1_VE		26
+#define RST_AHB1_LCD0		27
+#define RST_AHB1_LCD1		28
+#define RST_AHB1_CSI		29
+#define RST_AHB1_HDMI		30
+#define RST_AHB1_BE0		31
+#define RST_AHB1_BE1		32
+#define RST_AHB1_FE0		33
+#define RST_AHB1_FE1		34
+#define RST_AHB1_MP		35
+#define RST_AHB1_GPU		36
+#define RST_AHB1_DEU0		37
+#define RST_AHB1_DEU1		38
+#define RST_AHB1_DRC0		39
+#define RST_AHB1_DRC1		40
+#define RST_AHB1_LVDS		41
+
+#define RST_APB1_CODEC		42
+#define RST_APB1_SPDIF		43
+#define RST_APB1_DIGITAL_MIC	44
+#define RST_APB1_DAUDIO0	45
+#define RST_APB1_DAUDIO1	46
+#define RST_APB2_I2C0		47
+#define RST_APB2_I2C1		48
+#define RST_APB2_I2C2		49
+#define RST_APB2_I2C3		50
+#define RST_APB2_UART0		51
+#define RST_APB2_UART1		52
+#define RST_APB2_UART2		53
+#define RST_APB2_UART3		54
+#define RST_APB2_UART4		55
+#define RST_APB2_UART5		56
+
+#endif /* _DT_BINDINGS_RST_SUN6I_A31_H_ */

include/dt-bindings/reset/sun8i-a23-a33-ccu.h

+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_A23_A33_H_
+#define _DT_BINDINGS_RST_SUN8I_A23_A33_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_HSIC		2
+#define RST_MBUS		3
+#define RST_BUS_MIPI_DSI	4
+#define RST_BUS_SS		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_NAND		10
+#define RST_BUS_DRAM		11
+#define RST_BUS_HSTIMER		12
+#define RST_BUS_SPI0		13
+#define RST_BUS_SPI1		14
+#define RST_BUS_OTG		15
+#define RST_BUS_EHCI		16
+#define RST_BUS_OHCI		17
+#define RST_BUS_VE		18
+#define RST_BUS_LCD		19
+#define RST_BUS_CSI		20
+#define RST_BUS_DE_BE		21
+#define RST_BUS_DE_FE		22
+#define RST_BUS_GPU		23
+#define RST_BUS_MSGBOX		24
+#define RST_BUS_SPINLOCK	25
+#define RST_BUS_DRC		26
+#define RST_BUS_SAT		27
+#define RST_BUS_LVDS		28
+#define RST_BUS_CODEC		29
+#define RST_BUS_I2S0		30
+#define RST_BUS_I2S1		31
+#define RST_BUS_I2C0		32
+#define RST_BUS_I2C1		33
+#define RST_BUS_I2C2		34
+#define RST_BUS_UART0		35
+#define RST_BUS_UART1		36
+#define RST_BUS_UART2		37
+#define RST_BUS_UART3		38
+#define RST_BUS_UART4		39
+
+#endif /* _DT_BINDINGS_RST_SUN8I_A23_A33_H_ */