Blackfin arch: Do not pollute name space used in linux-2.6.x/sound

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

include/asm-blackfin/mach-bf527/defBF52x_base.h

@@ -1718,55 +1718,55 @@
 
 /* Bit masks for HOST_CONTROL */
 
-#define                   HOST_EN  0x1        /* Host Enable */
-#define                  nHOST_EN  0x0       
-#define                  HOST_END  0x2        /* Host Endianess */
-#define                 nHOST_END  0x0       
-#define                 DATA_SIZE  0x4        /* Data Size */
-#define                nDATA_SIZE  0x0       
-#define                  HOST_RST  0x8        /* Host Reset */
-#define                 nHOST_RST  0x0       
-#define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                 nHRDY_OVR  0x0       
-#define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                 nINT_MODE  0x0       
-#define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                    nBT_EN  0x0       
-#define                       EHW  0x100      /* Enable Host Write */
-#define                      nEHW  0x0       
-#define                       EHR  0x200      /* Enable Host Read */
-#define                      nEHR  0x0       
-#define                       BDR  0x400      /* Burst DMA Requests */
-#define                      nBDR  0x0       
+#define                   HOST_CNTR_HOST_EN  0x1        /* Host Enable */
+#define                  HOST_CNTR_nHOST_EN  0x0
+#define                  HOST_CNTR_HOST_END  0x2        /* Host Endianess */
+#define                 HOST_CNTR_nHOST_END  0x0
+#define                 HOST_CNTR_DATA_SIZE  0x4        /* Data Size */
+#define                HOST_CNTR_nDATA_SIZE  0x0
+#define                  HOST_CNTR_HOST_RST  0x8        /* Host Reset */
+#define                 HOST_CNTR_nHOST_RST  0x0
+#define                  HOST_CNTR_HRDY_OVR  0x20       /* Host Ready Override */
+#define                 HOST_CNTR_nHRDY_OVR  0x0
+#define                  HOST_CNTR_INT_MODE  0x40       /* Interrupt Mode */
+#define                 HOST_CNTR_nINT_MODE  0x0
+#define                     HOST_CNTR_BT_EN  0x80       /* Bus Timeout Enable */
+#define                   HOST_CNTR_ nBT_EN  0x0
+#define                       HOST_CNTR_EHW  0x100      /* Enable Host Write */
+#define                      HOST_CNTR_nEHW  0x0
+#define                       HOST_CNTR_EHR  0x200      /* Enable Host Read */
+#define                      HOST_CNTR_nEHR  0x0
+#define                       HOST_CNTR_BDR  0x400      /* Burst DMA Requests */
+#define                      HOST_CNTR_nBDR  0x0
 
 /* Bit masks for HOST_STATUS */
 
-#define                     READY  0x1        /* DMA Ready */
-#define                    nREADY  0x0       
-#define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 nFIFOFULL  0x0       
-#define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                nFIFOEMPTY  0x0       
-#define                  COMPLETE  0x8        /* DMA Complete */
-#define                 nCOMPLETE  0x0       
-#define                      HSHK  0x10       /* Host Handshake */
-#define                     nHSHK  0x0       
-#define                   TIMEOUT  0x20       /* Host Timeout */
-#define                  nTIMEOUT  0x0       
-#define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                     nHIRQ  0x0       
-#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               nALLOW_CNFG  0x0       
-#define                   DMA_DIR  0x100      /* DMA Direction */
-#define                  nDMA_DIR  0x0       
-#define                       BTE  0x200      /* Bus Timeout Enabled */
-#define                      nBTE  0x0       
-#define               HOSTRD_DONE  0x8000     /* Host Read Completion Interrupt */
-#define              nHOSTRD_DONE  0x0
+#define                     HOST_STAT_READY  0x1        /* DMA Ready */
+#define                    HOST_STAT_nREADY  0x0
+#define                  HOST_STAT_FIFOFULL  0x2        /* FIFO Full */
+#define                 HOST_STAT_nFIFOFULL  0x0
+#define                 HOST_STAT_FIFOEMPTY  0x4        /* FIFO Empty */
+#define                HOST_STAT_nFIFOEMPTY  0x0
+#define                  HOST_STAT_COMPLETE  0x8        /* DMA Complete */
+#define                 HOST_STAT_nCOMPLETE  0x0
+#define                      HOST_STAT_HSHK  0x10       /* Host Handshake */
+#define                     HOST_STAT_nHSHK  0x0
+#define                   HOST_STAT_TIMEOUT  0x20       /* Host Timeout */
+#define                  HOST_STAT_nTIMEOUT  0x0
+#define                      HOST_STAT_HIRQ  0x40       /* Host Interrupt Request */
+#define                     HOST_STAT_nHIRQ  0x0
+#define                HOST_STAT_ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define               HOST_STAT_nALLOW_CNFG  0x0
+#define                   HOST_STAT_DMA_DIR  0x100      /* DMA Direction */
+#define                  HOST_STAT_nDMA_DIR  0x0
+#define                       HOST_STAT_BTE  0x200      /* Bus Timeout Enabled */
+#define                      HOST_STAT_nBTE  0x0
+#define               HOST_STAT_HOSTRD_DONE  0x8000     /* Host Read Completion Interrupt */
+#define              HOST_STAT_nHOSTRD_DONE  0x0
 
 /* Bit masks for HOST_TIMEOUT */
 
-#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+#define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
 
 /* Bit masks for CNT_CONFIG */