Skip to content

L
linux
Commit cfa76f02 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6 

* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits)
  [PARISC] fix uninitialized variable warning in asm/rtc.h
  [PARISC] Port checkstack.pl to parisc
  [PARISC] Make palo target work when $obj != $src
  [PARISC] Zap unused variable warnings in pci.c
  [PARISC] Fix tests in palo target
  [PARISC] Fix palo target
  [PARISC] Restore palo target
  [PARISC] Attempt to clean up parisc/Makefile
  [PARISC] Fix infinite loop in /proc/iomem
  [PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable
  [PARISC] Squelch pci_enable_device __must_check warning in superio
  [PARISC] Kill off broken irqstack code
  [PARISC] Remove hardcoded uses of PAGE_SIZE
  [PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use
  [PARISC] Kill off the last vestiges of ASM_PAGE_SIZE
  [PARISC] Kill off ASM_PAGE_SIZE use
  [PARISC] Beautify parisc vmlinux.lds.S
  [PARISC] Clean up a resource_size_t warning in sba_iommu
  [PARISC] Kill incorrect cast warning in unwinder
  [PARISC] Kill zone_to_nid printk warning
  ...

Fixed trivial conflict in include/asm-parisc/tlbflush.h manually
parents 093faa1d 7210c678
Hide whitespace changes
Inline Side-by-side
Showing with 6524 additions and 1886 deletions
arch/parisc/Makefile
View file @ cfa76f02
......@@ -19,26 +19,27 @@
NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
MACHINE := $(shell uname -m)
ifeq ($(MACHINE),parisc*)
NATIVE := 1
endif
ifdef CONFIG_64BIT
CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
else
MACHINE := $(subst 64,,$(shell uname -m))
ifneq ($(MACHINE),parisc)
CROSS_COMPILE := hppa-linux-
endif
WIDTH := 64
CROSS_COMPILE := hppa64-linux-gnu-
else # 32-bit
WIDTH :=
endif
FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align
# attempt to help out folks who are cross-compiling
ifeq ($(NATIVE),1)
CROSS_COMPILE := hppa$(WIDTH)-linux-
endif
OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
ifneq ($(call cc-ifversion, -lt, 0303, "bad"),)
$(error Sorry, GCC v3.3 or above is required.)
endif
cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
......@@ -69,7 +70,7 @@ kernel-y := mm/ kernel/ math-emu/ kernel/init_task.o
kernel-$(CONFIG_HPUX) += hpux/
core-y += $(addprefix arch/parisc/, $(kernel-y))
libs-y += arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
libs-y += arch/parisc/lib/
drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/
......@@ -77,27 +78,27 @@ PALO := $(shell if which palo; then : ; \
elif [ -x /sbin/palo ]; then echo /sbin/palo; \
fi)
PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \
else echo $(obj)/palo.conf; \
fi)
palo: vmlinux
@if [ -x $PALO ]; then \
@if test ! -x "$(PALO)"; then \
echo 'ERROR: Please install palo first (apt-get install palo)';\
echo 'or build it from source and install it somewhere in your $$PATH';\
false; \
fi
@if [ ! -f ./palo.conf ]; then \
cp arch/parisc/defpalo.conf palo.conf; \
echo 'A generic palo config file (./palo.conf) has been created for you.'; \
@if test ! -f "$(PALOCONF)"; then \
cp $(src)/arch/parisc/defpalo.conf $(obj)/palo.conf; \
echo 'A generic palo config file ($(obj)/palo.conf) has been created for you.'; \
echo 'You should check it and re-run "make palo".'; \
echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \
false; \
fi
$(PALO) -f ./palo.conf
oldpalo: vmlinux
export TOPDIR=`pwd`; \
unset STRIP LDFLAGS CPP CPPFLAGS AFLAGS CFLAGS CC LD; cd ../palo && make lifimage
$(PALO) -f $(PALOCONF)
# Shorthands for known targets not supported by parisc, use palo as default
Image zImage bzImage: palo
# Shorthands for known targets not supported by parisc, use vmlinux as default
Image zImage bzImage: vmlinux
kernel_install: vmlinux
sh $(src)/arch/parisc/install.sh \
......@@ -116,3 +117,12 @@ define archhelp
@echo ' (distribution) /sbin/installkernel or'
@echo ' copy to $$(INSTALL_PATH)'
endef
# we require gcc 3.3 or above to compile the kernel
archprepare: checkbin
checkbin:
@if test "$(call cc-version)" -lt "0303"; then \
echo -n "Sorry, GCC v3.3 or above is required to build " ; \
echo "the kernel." ; \
false ; \
fi
arch/parisc/configs/712_defconfig
View file @ cfa76f02
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-pa6
# Sun Mar 26 19:59:51 2006
# Linux kernel version: 2.6.23
# Fri Oct 12 21:00:07 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
......@@ -43,31 +55,29 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
......@@ -91,6 +101,9 @@ CONFIG_PA7100LC=y
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
CONFIG_PARISC_PAGE_SIZE_4KB=y
# CONFIG_PARISC_PAGE_SIZE_16KB is not set
# CONFIG_PARISC_PAGE_SIZE_64KB is not set
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PREEMPT_NONE is not set
......@@ -98,6 +111,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
......@@ -108,6 +122,9 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
......@@ -120,21 +137,19 @@ CONFIG_GSC_LASI=y
# CONFIG_GSC_WAX is not set
# CONFIG_EISA is not set
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# PA-RISC specific drivers
#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
......@@ -151,13 +166,15 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
......@@ -174,17 +191,23 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
......@@ -192,37 +215,18 @@ CONFIG_NETFILTER=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
......@@ -234,7 +238,6 @@ CONFIG_LLC2=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
......@@ -250,7 +253,17 @@ CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
......@@ -259,39 +272,24 @@ CONFIG_NET_PKTGEN=m
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
......@@ -300,13 +298,11 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
......@@ -314,6 +310,9 @@ CONFIG_ATA_OVER_ETH=m
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
......@@ -333,104 +332,61 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transport Attributes
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_ZALON is not set
CONFIG_SCSI_DEBUG=m
#
# Multi-device support (RAID and LVM)
#
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# PHY device support
#
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ATMEL is not set
# CONFIG_HOSTAP is not set
#
# Wan interfaces
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
......@@ -442,26 +398,22 @@ CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
......@@ -486,14 +438,22 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
......@@ -516,6 +476,7 @@ CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -523,6 +484,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_GSC=y
CONFIG_SERIAL_8250_NR_UARTS=17
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
......@@ -545,36 +507,15 @@ CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
......@@ -582,46 +523,59 @@ CONFIG_MAX_RAW_DEVS=256
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multimedia Capabilities Port drivers
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Digital Video Broadcasting Devices
# Graphics support
#
# CONFIG_DVB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
......@@ -633,6 +587,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
......@@ -646,16 +601,11 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -673,9 +623,11 @@ CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
......@@ -685,8 +637,10 @@ CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# GSC devices
......@@ -694,15 +648,25 @@ CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_HARMONY=y
#
# Open Sound System
# System on Chip audio support
#
# CONFIG_SOUND_PRIME is not set
# CONFIG_SND_SOC is not set
#
# USB support
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
......@@ -712,19 +676,28 @@ CONFIG_SND_HARMONY=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
#
# MMC/SD Card support
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
# CONFIG_MMC is not set
#
# InfiniBand support
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
......@@ -734,6 +707,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
......@@ -744,15 +718,16 @@ CONFIG_JFS_FS=m
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
......@@ -783,11 +758,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
......@@ -795,6 +771,7 @@ CONFIG_RAMFS=y
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
......@@ -806,6 +783,8 @@ CONFIG_RAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
......@@ -827,6 +806,7 @@ CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
......@@ -834,12 +814,13 @@ CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -891,6 +872,11 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
......@@ -901,21 +887,32 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_RODATA=y
#
......@@ -924,12 +921,13 @@ CONFIG_DEBUG_RODATA=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
......@@ -938,9 +936,18 @@ CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
......@@ -949,21 +956,28 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/parisc/configs/a500_defconfig
View file @ cfa76f02
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc5-pa1
# Fri Oct 21 23:04:54 2005
# Linux kernel version: 2.6.23
# Fri Oct 12 21:12:44 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_TIME_LOW_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_IRQ_PER_CPU=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
......@@ -80,11 +105,23 @@ CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
CONFIG_64BIT=y
CONFIG_PARISC_PAGE_SIZE_4KB=y
# CONFIG_PARISC_PAGE_SIZE_16KB is not set
# CONFIG_PARISC_PAGE_SIZE_64KB is not set
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NODES_SHIFT=3
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
......@@ -95,7 +132,10 @@ CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
......@@ -104,7 +144,7 @@ CONFIG_NR_CPUS=8
#
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
......@@ -124,13 +164,14 @@ CONFIG_CARDBUS=y
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
......@@ -139,6 +180,7 @@ CONFIG_PCCARD_NONSTATIC=m
# CONFIG_SUPERIO is not set
# CONFIG_CHASSIS_LCD_LED is not set
CONFIG_PDC_CHASSIS=y
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
......@@ -160,7 +202,10 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
......@@ -177,97 +222,97 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
......@@ -277,48 +322,38 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
# CONFIG_IP6_NF_MATCH_OWNER is not set
# CONFIG_IP6_NF_MATCH_MARK is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_AHESP is not set
# CONFIG_IP6_NF_MATCH_LENGTH is not set
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_MARK is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -329,11 +364,13 @@ CONFIG_LLC2=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -342,7 +379,17 @@ CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
......@@ -351,34 +398,17 @@ CONFIG_NET_PKTGEN=m
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
......@@ -391,21 +421,14 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
......@@ -413,6 +436,9 @@ CONFIG_IOSCHED_CFQ=y
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
......@@ -432,18 +458,18 @@ CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transport Attributes
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
......@@ -451,59 +477,40 @@ CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Multi-device support (RAID and LVM)
#
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
......@@ -517,39 +524,25 @@ CONFIG_FUSION_FC=m
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_VETH is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
......@@ -558,10 +551,6 @@ CONFIG_MII=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
......@@ -573,15 +562,18 @@ CONFIG_TULIP_MMIO=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
......@@ -593,84 +585,46 @@ CONFIG_E100=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
......@@ -680,10 +634,6 @@ CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
......@@ -694,28 +644,25 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
......@@ -732,6 +679,7 @@ CONFIG_INPUT=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
......@@ -747,6 +695,7 @@ CONFIG_INPUT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -754,8 +703,10 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=17
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
......@@ -765,83 +716,73 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MUX is not set
CONFIG_PDC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_PARISC=y
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multimedia Capabilities Port drivers
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Digital Video Broadcasting Devices
# Graphics support
#
# CONFIG_DVB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
#
......@@ -856,33 +797,46 @@ CONFIG_DUMMY_CONSOLE_ROWS=64
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
#
# MMC/SD Card support
# DMA Engine support
#
# CONFIG_MMC is not set
# CONFIG_DMA_ENGINE is not set
#
# InfiniBand support
# DMA Clients
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
# DMA Devices
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
......@@ -891,6 +845,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
......@@ -901,14 +856,16 @@ CONFIG_JFS_FS=m
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
......@@ -939,18 +896,20 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
......@@ -963,6 +922,7 @@ CONFIG_RAMFS=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
......@@ -983,6 +943,7 @@ CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
......@@ -990,12 +951,13 @@ CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1047,6 +1009,11 @@ CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
......@@ -1057,19 +1024,34 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RWLOCK is not set
# CONFIG_DEBUG_RODATA is not set
#
# Security options
......@@ -1077,12 +1059,13 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
......@@ -1091,32 +1074,47 @@ CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/parisc/configs/b180_defconfig
View file @ cfa76f02
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc1-pa0
# Tue Jan 17 08:21:01 2006
# Linux kernel version: 2.6.23
# Fri Oct 12 21:16:46 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
......@@ -42,30 +51,27 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
......@@ -89,16 +95,26 @@ CONFIG_PA7100LC=y
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
CONFIG_PARISC_PAGE_SIZE_4KB=y
# CONFIG_PARISC_PAGE_SIZE_16KB is not set
# CONFIG_PARISC_PAGE_SIZE_64KB is not set
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PREEMPT is not set
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
......@@ -113,7 +129,7 @@ CONFIG_EISA=y
CONFIG_EISA_NAMES=y
CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
......@@ -123,15 +139,12 @@ CONFIG_GSC_DINO=y
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# PA-RISC specific drivers
#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
......@@ -151,6 +164,8 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
......@@ -167,18 +182,32 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -199,7 +228,14 @@ CONFIG_IPV6=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
......@@ -208,39 +244,24 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
......@@ -251,15 +272,13 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_IDE is not set
#
......@@ -267,6 +286,8 @@ CONFIG_ATA_OVER_ETH=y
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
......@@ -286,18 +307,17 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transport Attributes
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
......@@ -308,12 +328,14 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -327,23 +349,22 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
......@@ -351,22 +372,14 @@ CONFIG_SCSI_NCR53C8XX_SYNC=40
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=y
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
......@@ -382,35 +395,21 @@ CONFIG_MD_RAID6=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
# An alternative FireWire stack is available with EXPERIMENTAL=y
#
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_LASI_82596=y
......@@ -420,10 +419,6 @@ CONFIG_LASI_82596=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
# CONFIG_TULIP_MMIO is not set
......@@ -435,62 +430,47 @@ CONFIG_TULIP=y
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_QLA3XXX is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
......@@ -501,24 +481,19 @@ CONFIG_PPP=y
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
......@@ -543,19 +518,31 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_HP_SDC_RTC is not set
......@@ -579,6 +566,7 @@ CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -586,17 +574,20 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_GSC=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
......@@ -605,6 +596,7 @@ CONFIG_SERIAL_MUX=y
CONFIG_SERIAL_MUX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -612,35 +604,18 @@ CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
......@@ -648,46 +623,59 @@ CONFIG_GEN_RTC=y
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multimedia Capabilities Port drivers
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Digital Video Broadcasting Devices
# Graphics support
#
# CONFIG_DVB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
......@@ -698,16 +686,18 @@ CONFIG_FB_STI=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_VIRTUAL is not set
#
......@@ -717,21 +707,17 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -749,8 +735,11 @@ CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
......@@ -760,13 +749,16 @@ CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -778,6 +770,18 @@ CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
......@@ -791,11 +795,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
......@@ -812,15 +818,25 @@ CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_HARMONY=y
#
# Open Sound System
# System on Chip audio support
#
# CONFIG_SOUND_PRIME is not set
# CONFIG_SND_SOC is not set
#
# USB support
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
......@@ -831,20 +847,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
#
# MMC/SD Card support
# DMA Engine support
#
# CONFIG_MMC is not set
# CONFIG_DMA_ENGINE is not set
#
# InfiniBand support
# DMA Clients
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
......@@ -860,9 +885,11 @@ CONFIG_JBD=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
......@@ -889,11 +916,12 @@ CONFIG_JOLIET=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -912,6 +940,7 @@ CONFIG_RAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
......@@ -982,22 +1011,32 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
#
......@@ -1007,13 +1046,10 @@ CONFIG_FORCED_INLINING=y
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_SECLVL is not set
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
......@@ -1023,7 +1059,12 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
......@@ -1034,19 +1075,26 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/parisc/configs/c3000_defconfig
View file @ cfa76f02
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-pa6
# Sun Mar 26 20:03:29 2006
# Linux kernel version: 2.6.23
# Fri Oct 12 21:24:00 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
......@@ -43,31 +54,29 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
......@@ -93,6 +102,9 @@ CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
# CONFIG_64BIT is not set
CONFIG_PARISC_PAGE_SIZE_4KB=y
# CONFIG_PARISC_PAGE_SIZE_16KB is not set
# CONFIG_PARISC_PAGE_SIZE_64KB is not set
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PREEMPT_NONE is not set
......@@ -100,6 +112,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
......@@ -110,6 +123,9 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
......@@ -117,7 +133,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
#
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
......@@ -127,10 +143,6 @@ CONFIG_IOMMU_SBA=y
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
......@@ -139,6 +151,7 @@ CONFIG_IOMMU_SBA=y
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
......@@ -155,13 +168,15 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
......@@ -178,22 +193,36 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
......@@ -201,42 +230,24 @@ CONFIG_NETFILTER_DEBUG=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
......@@ -247,7 +258,6 @@ CONFIG_IP_NF_QUEUE=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
......@@ -263,7 +273,17 @@ CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
......@@ -272,33 +292,17 @@ CONFIG_NET_PKTGEN=m
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
......@@ -310,14 +314,15 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
......@@ -331,19 +336,26 @@ CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
......@@ -354,8 +366,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
......@@ -365,10 +379,10 @@ CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
......@@ -376,6 +390,9 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
......@@ -395,18 +412,17 @@ CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transport Attributes
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
......@@ -415,66 +431,53 @@ CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_PROMISE=m
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
#
# Multi-device support (RAID and LVM)
#
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
......@@ -485,49 +488,31 @@ CONFIG_FUSION_SPI=m
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_VETH is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
......@@ -539,13 +524,16 @@ CONFIG_TULIP_MMIO=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
......@@ -558,16 +546,15 @@ CONFIG_E100=m
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -579,27 +566,36 @@ CONFIG_E1000=m
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
# Wireless LAN
#
# CONFIG_NET_RADIO is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Wan interfaces
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
......@@ -612,27 +608,23 @@ CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
......@@ -655,11 +647,14 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
......@@ -679,6 +674,7 @@ CONFIG_SERIO_LIBPS2=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -686,6 +682,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
......@@ -704,38 +701,19 @@ CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
......@@ -743,46 +721,59 @@ CONFIG_MAX_RAW_DEVS=256
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multimedia Capabilities Port drivers
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Digital Video Broadcasting Devices
# Graphics support
#
# CONFIG_DVB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
......@@ -793,17 +784,20 @@ CONFIG_FB_STI=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
......@@ -813,21 +807,17 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -845,9 +835,11 @@ CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
......@@ -855,7 +847,6 @@ CONFIG_SND_SUPPORT_OLD_API=y
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
......@@ -866,7 +857,7 @@ CONFIG_SND_AC97_BUS=y
# PCI devices
#
CONFIG_SND_AD1889=y
# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -879,6 +870,18 @@ CONFIG_SND_AD1889=y
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
......@@ -898,6 +901,7 @@ CONFIG_SND_AD1889=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
......@@ -907,22 +911,43 @@ CONFIG_SND_AD1889=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
......@@ -930,7 +955,7 @@ CONFIG_USB_DEBUG=y
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
......@@ -940,15 +965,16 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
......@@ -970,54 +996,14 @@ CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
......@@ -1034,16 +1020,22 @@ CONFIG_USB_MICROTEK=m
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
......@@ -1054,21 +1046,29 @@ CONFIG_USB_LEGOTOWER=m
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
#
# MMC/SD Card support
# DMA Engine support
#
# CONFIG_MMC is not set
# CONFIG_DMA_ENGINE is not set
#
# InfiniBand support
# DMA Clients
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
# DMA Devices
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
......@@ -1077,21 +1077,23 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
......@@ -1121,11 +1123,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
......@@ -1164,6 +1167,7 @@ CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
......@@ -1171,7 +1175,6 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1223,6 +1226,11 @@ CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
......@@ -1233,21 +1241,32 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_RODATA=y
#
......@@ -1255,12 +1274,12 @@ CONFIG_DEBUG_RODATA=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
......@@ -1269,7 +1288,15 @@ CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
......@@ -1280,21 +1307,28 @@ CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/parisc/defconfig
View file @ cfa76f02
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-pa10
# Sun Apr 2 15:26:38 2006
# Linux kernel version: 2.6.23
# Fri Oct 12 20:54:57 2007
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
......@@ -43,31 +55,29 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
......@@ -101,6 +111,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
......@@ -111,6 +122,9 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_HPUX is not set
#
......@@ -125,7 +139,7 @@ CONFIG_EISA=y
CONFIG_EISA_NAMES=y
# CONFIG_ISA is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
......@@ -154,10 +168,6 @@ CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
......@@ -166,6 +176,7 @@ CONFIG_PCCARD_NONSTATIC=y
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS=y
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
......@@ -182,13 +193,15 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
......@@ -205,33 +218,39 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
......@@ -243,7 +262,6 @@ CONFIG_LLC2=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
......@@ -259,7 +277,17 @@ CONFIG_LLC2=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
......@@ -268,41 +296,26 @@ CONFIG_LLC2=m
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
......@@ -317,13 +330,14 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
......@@ -334,24 +348,32 @@ CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
......@@ -362,8 +384,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
......@@ -373,10 +397,10 @@ CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
......@@ -384,6 +408,9 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
......@@ -403,18 +430,17 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transport Attributes
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
......@@ -424,11 +450,13 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
......@@ -438,55 +466,45 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=y
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
......@@ -499,35 +517,20 @@ CONFIG_BLK_DEV_DM=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_VETH is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
......@@ -536,10 +539,6 @@ CONFIG_LASI_82596=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
......@@ -554,6 +553,10 @@ CONFIG_TULIP=y
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
......@@ -561,7 +564,6 @@ CONFIG_NET_PCI=y
# CONFIG_AC3200 is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
......@@ -577,15 +579,14 @@ CONFIG_NET_PCI=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -597,64 +598,36 @@ CONFIG_ACENIC=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=y
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
# Wireless LAN
#
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
......@@ -664,10 +637,6 @@ CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
......@@ -681,27 +650,23 @@ CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
......@@ -726,14 +691,23 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
......@@ -757,6 +731,7 @@ CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -764,6 +739,8 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_GSC=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=17
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
......@@ -788,25 +765,14 @@ CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -816,16 +782,8 @@ CONFIG_GEN_RTC_X=y
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
......@@ -833,46 +791,59 @@ CONFIG_GEN_RTC_X=y
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multimedia Capabilities Port drivers
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Digital Video Broadcasting Devices
# Graphics support
#
# CONFIG_DVB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
......@@ -883,17 +854,20 @@ CONFIG_FB_STI=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
......@@ -903,6 +877,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
......@@ -916,16 +891,11 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -938,35 +908,36 @@ CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
CONFIG_SND_AD1889=y
CONFIG_SND_AD1889_OPL3=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -979,6 +950,18 @@ CONFIG_SND_AD1889_OPL3=y
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
......@@ -998,6 +981,7 @@ CONFIG_SND_AD1889_OPL3=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
......@@ -1007,31 +991,54 @@ CONFIG_SND_AD1889_OPL3=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# GSC devices
#
CONFIG_SND_HARMONY=y
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
#
# USB support
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
......@@ -1039,7 +1046,7 @@ CONFIG_USB=y
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
......@@ -1049,15 +1056,16 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
......@@ -1071,53 +1079,11 @@ CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y
#
......@@ -1135,16 +1101,22 @@ CONFIG_USB_MON=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
......@@ -1155,20 +1127,29 @@ CONFIG_USB_MON=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
#
# MMC/SD Card support
# DMA Engine support
#
# CONFIG_MMC is not set
# CONFIG_DMA_ENGINE is not set
#
# InfiniBand support
# DMA Clients
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
......@@ -1178,16 +1159,19 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
......@@ -1217,11 +1201,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
......@@ -1229,6 +1214,7 @@ CONFIG_RAMFS=y
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
......@@ -1261,6 +1247,7 @@ CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
......@@ -1268,12 +1255,13 @@ CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1325,6 +1313,11 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
......@@ -1335,21 +1328,32 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
#
......@@ -1358,12 +1362,13 @@ CONFIG_FORCED_INLINING=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
......@@ -1372,9 +1377,18 @@ CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
......@@ -1383,21 +1397,28 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/parisc/hpux/gate.S
View file @ cfa76f02
......@@ -20,7 +20,7 @@
.import hpux_call_table
.import hpux_syscall_exit,code
.align 4096
.align PAGE_SIZE
ENTRY(hpux_gateway_page)
nop
#ifdef CONFIG_64BIT
......@@ -103,5 +103,5 @@ syscall_nosys:
ldo -ENOSYS(%r0),%r28
ENDPROC(hpux_gateway_page)
.align 4096
.align PAGE_SIZE
ENTRY(end_hpux_gateway_page)
arch/parisc/kernel/asm-offsets.c
View file @ cfa76f02
......@@ -290,9 +290,6 @@ int main(void)
DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE);
DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT);
DEFINE(ASM_PT_INITIAL, PT_INITIAL);
DEFINE(ASM_PAGE_SIZE, PAGE_SIZE);
DEFINE(ASM_PAGE_SIZE_DIV64, PAGE_SIZE/64);
DEFINE(ASM_PAGE_SIZE_DIV128, PAGE_SIZE/128);
BLANK();
DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
......
arch/parisc/kernel/entry.S
View file @ cfa76f02
......@@ -98,7 +98,6 @@
* The "get_stack" macros are responsible for determining the
* kernel stack value.
*
* For Faults:
* If sr7 == 0
* Already using a kernel stack, so call the
* get_stack_use_r30 macro to push a pt_regs structure
......@@ -110,26 +109,6 @@
* task pointer pointed to by cr30. Set the stack
* pointer to point to the end of the task structure.
*
* For Interrupts:
* If sr7 == 0
* Already using a kernel stack, check to see if r30
* is already pointing to the per processor interrupt
* stack. If it is, call the get_stack_use_r30 macro
* to push a pt_regs structure on the stack, and store
* registers there. Otherwise, call get_stack_use_cr31
* to get a pointer to the base of the interrupt stack
* and push a pt_regs structure on that stack.
* else
* Need to set up a kernel stack, so call the
* get_stack_use_cr30 macro to set up a pointer
* to the pt_regs structure contained within the
* task pointer pointed to by cr30. Set the stack
* pointer to point to the end of the task structure.
* N.B: We don't use the interrupt stack for the
* first interrupt from userland, because signals/
* resched's are processed when returning to userland,
* and we can sleep in those cases.
*
* Note that we use shadowed registers for temps until
* we can save %r26 and %r29. %r26 is used to preserve
* %r8 (a shadowed register) which temporarily contained
......@@ -652,7 +631,7 @@
.text
.align 4096
.align PAGE_SIZE
ENTRY(fault_vector_20)
/* First vector is invalid (0) */
......@@ -904,7 +883,7 @@ ENDPROC(_switch_to)
*
*/
.align 4096
.align PAGE_SIZE
ENTRY(syscall_exit_rfi)
mfctl %cr30,%r16
......@@ -1086,23 +1065,13 @@ intr_do_preempt:
intr_extint:
CMPIB=,n 0,%r16,1f
get_stack_use_cr30
b,n 3f
b,n 2f
1:
#if 0 /* Interrupt Stack support not working yet! */
mfctl %cr31,%r1
copy %r30,%r17
/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
DEPI 0,31,15,%r17
CMPB=,n %r1,%r17,2f
get_stack_use_cr31
b,n 3f
#endif
2:
get_stack_use_r30
3:
2:
save_specials %r29
virt_map
save_general %r29
......
arch/parisc/kernel/head.S
View file @ cfa76f02
......@@ -95,7 +95,7 @@ $bss_loop:
1:
stw %r3,0(%r4)
ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
ldo (PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
addib,> -1,%r1,1b
#if PT_NLEVELS == 3
ldo ASM_PMD_ENTRY_SIZE(%r4),%r4
......@@ -128,10 +128,6 @@ $pgt_fill_loop:
/* And the stack pointer too */
ldo THREAD_SZ_ALGN(%r6),%sp
/* And the interrupt stack */
load32 interrupt_stack,%r6
mtctl %r6,%cr31
#ifdef CONFIG_SMP
/* Set the smp rendevous address into page zero.
** It would be safer to do this in init_smp_config() but
......
arch/parisc/kernel/hpmc.S
View file @ cfa76f02
......@@ -55,13 +55,13 @@
* IODC requires 7K byte stack. That leaves 1K byte for os_hpmc.
*/
.align 4096
.align PAGE_SIZE
hpmc_stack:
.block 16384
#define HPMC_IODC_BUF_SIZE 0x8000
.align 4096
.align PAGE_SIZE
hpmc_iodc_buf:
.block HPMC_IODC_BUF_SIZE
......
arch/parisc/kernel/init_task.c
View file @ cfa76f02
......@@ -49,7 +49,6 @@ EXPORT_SYMBOL(init_mm);
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
unsigned char interrupt_stack[ISTACK_SIZE] __attribute__ ((section("init_istack"), aligned(4096)));
union thread_union init_thread_union
__attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
{ INIT_THREAD_INFO(init_task) };
......
arch/parisc/kernel/pacache.S
View file @ cfa76f02
......@@ -289,7 +289,7 @@ ENTRY(copy_user_page_asm)
*/
ldd 0(%r25), %r19
ldi ASM_PAGE_SIZE_DIV128, %r1
ldi (PAGE_SIZE / 128), %r1
ldw 64(%r25), %r0 /* prefetch 1 cacheline ahead */
ldw 128(%r25), %r0 /* prefetch 2 */
......@@ -355,7 +355,7 @@ ENTRY(copy_user_page_asm)
* use ldd/std on a 32 bit kernel.
*/
ldw 0(%r25), %r19
ldi ASM_PAGE_SIZE_DIV64, %r1
ldi (PAGE_SIZE / 64), %r1
1:
ldw 4(%r25), %r20
......@@ -553,7 +553,7 @@ ENTRY(__clear_user_page_asm)
pdtlb 0(%r28)
#ifdef CONFIG_64BIT
ldi ASM_PAGE_SIZE_DIV128, %r1
ldi (PAGE_SIZE / 128), %r1
/* PREFETCH (Write) has not (yet) been proven to help here */
/* #define PREFETCHW_OP ldd 256(%0), %r0 */
......@@ -578,7 +578,7 @@ ENTRY(__clear_user_page_asm)
ldo 128(%r28), %r28
#else /* ! CONFIG_64BIT */
ldi ASM_PAGE_SIZE_DIV64, %r1
ldi (PAGE_SIZE / 64), %r1
1:
stw %r0, 0(%r28)
......
arch/parisc/kernel/parisc_ksyms.c
View file @ cfa76f02
......@@ -122,31 +122,9 @@ EXPORT_SYMBOL($$divI_12);
EXPORT_SYMBOL($$divI_14);
EXPORT_SYMBOL($$divI_15);
extern void __ashrdi3(void);
extern void __ashldi3(void);
extern void __lshrdi3(void);
extern void __muldi3(void);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
asmlinkage void * __canonicalize_funcptr_for_compare(void *);
EXPORT_SYMBOL(__canonicalize_funcptr_for_compare);
#ifdef CONFIG_64BIT
extern void __divdi3(void);
extern void __udivdi3(void);
extern void __umoddi3(void);
extern void __moddi3(void);
EXPORT_SYMBOL(__divdi3);
EXPORT_SYMBOL(__udivdi3);
EXPORT_SYMBOL(__umoddi3);
EXPORT_SYMBOL(__moddi3);
#endif
#ifndef CONFIG_64BIT
extern void $$dyncall(void);
EXPORT_SYMBOL($$dyncall);
......
arch/parisc/kernel/pci-dma.c
View file @ cfa76f02
......@@ -569,11 +569,10 @@ static void *fail_alloc_consistent(struct device *dev, size_t size,
static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
void *addr = NULL;
void *addr;
/* rely on kmalloc to be cacheline aligned */
addr = kmalloc(size, flag);
if(addr)
addr = (void *)__get_free_pages(flag, get_order(size));
if (addr)
*dma_handle = (dma_addr_t)virt_to_phys(addr);
return addr;
......@@ -582,7 +581,7 @@ static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
static void pa11_dma_free_noncoherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t iova)
{
kfree(vaddr);
free_pages((unsigned long)vaddr, get_order(size));
return;
}
......
arch/parisc/kernel/pci.c
View file @ cfa76f02
......@@ -194,37 +194,13 @@ void __init pcibios_init_bus(struct pci_bus *bus)
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl);
}
/* KLUGE: Link the child and parent resources - generic PCI didn't */
static void
pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
{
if (!r->parent) {
printk(KERN_EMERG "PCI: resource not parented! [%p-%p]\n",
(void*) r->start, (void*) r->end);
r->parent = hba_res;
/* reverse link is harder *sigh* */
if (r->parent->child) {
if (r->parent->sibling) {
struct resource *next = r->parent->sibling;
while (next->sibling)
next = next->sibling;
next->sibling = r;
} else {
r->parent->sibling = r;
}
} else
r->parent->child = r;
}
}
/* called by drivers/pci/setup-bus.c:pci_setup_bridge(). */
void __devinit pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res)
{
struct pci_bus *bus = dev->bus;
struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
#ifdef CONFIG_64BIT
struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
#endif
if (res->flags & IORESOURCE_IO) {
/*
......@@ -243,23 +219,15 @@ void __devinit pcibios_resource_to_bus(struct pci_dev *dev,
}
DBG_RES("pcibios_resource_to_bus(%02x %s [%lx,%lx])\n",
bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM",
dev->bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM",
region->start, region->end);
/* KLUGE ALERT
** if this resource isn't linked to a "parent", then it seems
** to be a child of the HBA - lets link it in.
*/
pcibios_link_hba_resources(&hba->io_space, bus->resource[0]);
pcibios_link_hba_resources(&hba->lmmio_space, bus->resource[1]);
}
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
#ifdef CONFIG_64BIT
struct pci_bus *bus = dev->bus;
struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
#endif
if (res->flags & IORESOURCE_MEM) {
......
arch/parisc/kernel/processor.c
View file @ cfa76f02
......@@ -82,7 +82,12 @@ static int __cpuinit processor_probe(struct parisc_device *dev)
unsigned long cpuid;
struct cpuinfo_parisc *p;
#ifndef CONFIG_SMP
#ifdef CONFIG_SMP
if (num_online_cpus() >= NR_CPUS) {
printk(KERN_INFO "num_online_cpus() >= NR_CPUS\n");
return 1;
}
#else
if (boot_cpu_data.cpu_count > 0) {
printk(KERN_INFO "CONFIG_SMP=n ignoring additional CPUs\n");
return 1;
......
arch/parisc/kernel/smp.c
View file @ cfa76f02
......@@ -432,22 +432,10 @@ smp_cpu_init(int cpunum)
void __init smp_callin(void)
{
int slave_id = cpu_now_booting;
#if 0
void *istack;
#endif
smp_cpu_init(slave_id);
preempt_disable();
#if 0 /* NOT WORKING YET - see entry.S */
istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER);
if (istack == NULL) {
printk(KERN_CRIT "Failed to allocate interrupt stack for cpu %d\n",slave_id);
BUG();
}
mtctl(istack,31);
#endif
flush_cache_all_local(); /* start with known state */
flush_tlb_all_local(NULL);
......
arch/parisc/kernel/sys_parisc32.c
View file @ cfa76f02
......@@ -473,3 +473,10 @@ long sys32_lookup_dcookie(u32 cookie_high, u32 cookie_low, char __user *buf,
return sys_lookup_dcookie((u64)cookie_high << 32 | cookie_low,
buf, len);
}
asmlinkage long compat_sys_fallocate(int fd, int mode, u32 offhi, u32 offlo,
u32 lenhi, u32 lenlo)
{
return sys_fallocate(fd, mode, ((loff_t)offhi << 32) | offlo,
((loff_t)lenhi << 32) | lenlo);
}
arch/parisc/kernel/syscall.S
View file @ cfa76f02
......@@ -10,6 +10,7 @@
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/page.h>
#include <asm/psw.h>
#include <asm/thread_info.h>
#include <asm/assembly.h>
......@@ -38,7 +39,7 @@
* pointers.
*/
.align ASM_PAGE_SIZE
.align PAGE_SIZE
ENTRY(linux_gateway_page)
/* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */
......@@ -597,7 +598,7 @@ cas_action:
/* Make sure nothing else is placed on this page */
.align ASM_PAGE_SIZE
.align PAGE_SIZE
END(linux_gateway_page)
ENTRY(end_linux_gateway_page)
......@@ -608,7 +609,7 @@ ENTRY(end_linux_gateway_page)
.section .rodata,"a"
.align ASM_PAGE_SIZE
.align PAGE_SIZE
/* Light-weight-syscall table */
/* Start of lws table. */
ENTRY(lws_table)
......@@ -617,13 +618,13 @@ ENTRY(lws_table)
END(lws_table)
/* End of lws table */
.align ASM_PAGE_SIZE
.align PAGE_SIZE
ENTRY(sys_call_table)
#include "syscall_table.S"
END(sys_call_table)
#ifdef CONFIG_64BIT
.align ASM_PAGE_SIZE
.align PAGE_SIZE
ENTRY(sys_call_table64)
#define SYSCALL_TABLE_64BIT
#include "syscall_table.S"
......@@ -636,7 +637,7 @@ END(sys_call_table64)
will use this set of locks
*/
.section .data
.align 4096
.align PAGE_SIZE
ENTRY(lws_lock_start)
/* lws locks */
.align 16
......
arch/parisc/kernel/syscall_table.S
View file @ cfa76f02
......@@ -403,6 +403,7 @@
ENTRY_COMP(signalfd)
ENTRY_COMP(timerfd)
ENTRY_SAME(eventfd)
ENTRY_COMP(fallocate) /* 305 */
/* Nothing yet */
......
arch/parisc/kernel/time.c
View file @ cfa76f02
......@@ -189,16 +189,14 @@ static struct clocksource clocksource_cr16 = {
#ifdef CONFIG_SMP
int update_cr16_clocksource(void)
{
int change = 0;
/* since the cr16 cycle counters are not synchronized across CPUs,
we'll check if we should switch to a safe clocksource: */
if (clocksource_cr16.rating != 0 && num_online_cpus() > 1) {
clocksource_change_rating(&clocksource_cr16, 0);
change = 1;
return 1;
}
return change;
return 0;
}
#else
int update_cr16_clocksource(void)
......
arch/parisc/kernel/unwind.c
View file @ cfa76f02
......@@ -209,8 +209,8 @@ static int unwind_init(void)
static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int frame_size)
{
void handle_interruption(int, struct pt_regs *);
static unsigned long *hi = (unsigned long)&handle_interruption;
extern void handle_interruption(int, struct pt_regs *);
static unsigned long *hi = (unsigned long *)&handle_interruption;
if (pc == get_func_addr(hi)) {
struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
......
arch/parisc/kernel/vmlinux.lds.S
View file @ cfa76f02
......@@ -46,168 +46,211 @@ jiffies = jiffies_64;
#endif
SECTIONS
{
. = KERNEL_BINARY_TEXT_START;
. = KERNEL_BINARY_TEXT_START;
_text = .; /* Text and read-only data */
.text ALIGN(16) : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*(.text.do_softirq)
*(.text.sys_exit)
*(.text.do_sigaltstack)
*(.text.do_fork)
*(.text.*)
*(.fixup)
*(.lock.text) /* out-of-line lock text */
*(.gnu.warning)
_text = .; /* Text and read-only data */
.text ALIGN(16) : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*(.text.do_softirq)
*(.text.sys_exit)
*(.text.do_sigaltstack)
*(.text.do_fork)
*(.text.*)
*(.fixup)
*(.lock.text) /* out-of-line lock text */
*(.gnu.warning)
} = 0
/* End of text section */
_etext = .;
_etext = .; /* End of text section */
RODATA
BUG_TABLE
RODATA
BUG_TABLE
/* writeable */
. = ALIGN(ASM_PAGE_SIZE); /* Make sure this is page aligned so
that we can properly leave these
as writable */
data_start = .;
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
/* writeable */
/* Make sure this is page aligned so
* that we can properly leave these
* as writable
*/
. = ALIGN(PAGE_SIZE);
data_start = .;
. = ALIGN(16);
/* Exception table */
__ex_table : {
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
NOTES
NOTES
__start___unwind = .; /* unwind info */
.PARISC.unwind : { *(.PARISC.unwind) }
__stop___unwind = .;
/* unwind info */
.PARISC.unwind : {
__start___unwind = .;
*(.PARISC.unwind)
__stop___unwind = .;
}
/* rarely changed data like cpu maps */
. = ALIGN(16);
.data.read_mostly : { *(.data.read_mostly) }
/* rarely changed data like cpu maps */
. = ALIGN(16);
.data.read_mostly : {
*(.data.read_mostly)
}
. = ALIGN(L1_CACHE_BYTES);
.data : { /* Data */
DATA_DATA
CONSTRUCTORS
. = ALIGN(L1_CACHE_BYTES);
/* Data */
.data : {
DATA_DATA
CONSTRUCTORS
}
. = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : { *(.data.cacheline_aligned) }
. = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : {
*(.data.cacheline_aligned)
}
/* PA-RISC locks requires 16-byte alignment */
. = ALIGN(16);
.data.lock_aligned : { *(.data.lock_aligned) }
/* PA-RISC locks requires 16-byte alignment */
. = ALIGN(16);
.data.lock_aligned : {
*(.data.lock_aligned)
}
. = ALIGN(ASM_PAGE_SIZE);
/* nosave data is really only used for software suspend...it's here
* just in case we ever implement it */
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
. = ALIGN(ASM_PAGE_SIZE);
__nosave_end = .;
/* nosave data is really only used for software suspend...it's here
* just in case we ever implement it
*/
. = ALIGN(PAGE_SIZE);
__nosave_begin = .;
.data_nosave : {
*(.data.nosave)
}
. = ALIGN(PAGE_SIZE);
__nosave_end = .;
_edata = .; /* End of data section */
/* End of data section */
_edata = .;
__bss_start = .; /* BSS */
/* page table entries need to be PAGE_SIZE aligned */
. = ALIGN(ASM_PAGE_SIZE);
.data.vmpages : {
*(.data.vm0.pmd)
*(.data.vm0.pgd)
*(.data.vm0.pte)
/* BSS */
__bss_start = .;
/* page table entries need to be PAGE_SIZE aligned */
. = ALIGN(PAGE_SIZE);
.data.vmpages : {
*(.data.vm0.pmd)
*(.data.vm0.pgd)
*(.data.vm0.pte)
}
.bss : { *(.bss) *(COMMON) }
__bss_stop = .;
.bss : {
*(.bss)
*(COMMON)
}
__bss_stop = .;
/* assembler code expects init_task to be 16k aligned */
. = ALIGN(16384); /* init_task */
.data.init_task : { *(.data.init_task) }
/* The interrupt stack is currently partially coded, but not yet
* implemented */
. = ALIGN(16384);
init_istack : { *(init_istack) }
/* assembler code expects init_task to be 16k aligned */
. = ALIGN(16384);
/* init_task */
.data.init_task : {
*(.data.init_task)
}
#ifdef CONFIG_64BIT
. = ALIGN(16); /* Linkage tables */
.opd : { *(.opd) } PROVIDE (__gp = .);
.plt : { *(.plt) }
.dlt : { *(.dlt) }
. = ALIGN(16);
/* Linkage tables */
.opd : {
*(.opd)
} PROVIDE (__gp = .);
.plt : {
*(.plt)
}
.dlt : {
*(.dlt)
}
#endif
/* reserve space for interrupt stack by aligning __init* to 16k */
. = ALIGN(16384);
__init_begin = .;
.init.text : {
_sinittext = .;
*(.init.text)
_einittext = .;
}
.init.data : { *(.init.data) }
. = ALIGN(16);
__setup_start = .;
.init.setup : { *(.init.setup) }
__setup_end = .;
__initcall_start = .;
.initcall.init : {
INITCALLS
}
__initcall_end = .;
__con_initcall_start = .;
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
/* alternate instruction replacement. This is a mechanism x86 uses
* to detect the CPU type and replace generic instruction sequences
* with CPU specific ones. We don't currently do this in PA, but
* it seems like a good idea... */
. = ALIGN(4);
__alt_instructions = .;
.altinstructions : { *(.altinstructions) }
__alt_instructions_end = .;
.altinstr_replacement : { *(.altinstr_replacement) }
/* .exit.text is discard at runtime, not link time, to deal with references
from .altinstructions and .eh_frame */
.exit.text : { *(.exit.text) }
.exit.data : { *(.exit.data) }
/* reserve space for interrupt stack by aligning __init* to 16k */
. = ALIGN(16384);
__init_begin = .;
.init.text : {
_sinittext = .;
*(.init.text)
_einittext = .;
}
.init.data : {
*(.init.data)
}
. = ALIGN(16);
.init.setup : {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
.initcall.init : {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.con_initcall.init : {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
SECURITY_INIT
/* alternate instruction replacement. This is a mechanism x86 uses
* to detect the CPU type and replace generic instruction sequences
* with CPU specific ones. We don't currently do this in PA, but
* it seems like a good idea...
*/
. = ALIGN(4);
.altinstructions : {
__alt_instructions = .;
*(.altinstructions)
__alt_instructions_end = .;
}
.altinstr_replacement : {
*(.altinstr_replacement)
}
/* .exit.text is discard at runtime, not link time, to deal with references
* from .altinstructions and .eh_frame
*/
.exit.text : {
*(.exit.text)
}
.exit.data : {
*(.exit.data)
}
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(ASM_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
. = ALIGN(PAGE_SIZE);
.init.ramfs : {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
PERCPU(ASM_PAGE_SIZE)
PERCPU(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
_end = . ;
. = ALIGN(ASM_PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
_end = . ;
/* Sections to be discarded */
/DISCARD/ : {
*(.exitcall.exit)
/* Sections to be discarded */
/DISCARD/ : {
*(.exitcall.exit)
#ifdef CONFIG_64BIT
/* temporary hack until binutils is fixed to not emit these
for static binaries */
*(.interp)
*(.dynsym)
*(.dynstr)
*(.dynamic)
*(.hash)
*(.gnu.hash)
/* temporary hack until binutils is fixed to not emit these
* for static binaries
*/
*(.interp)
*(.dynsym)
*(.dynstr)
*(.dynamic)
*(.hash)
*(.gnu.hash)
#endif
}
STABS_DEBUG
.note 0 : { *(.note) }
STABS_DEBUG
.note 0 : { *(.note) }
}
arch/parisc/lib/Makefile
View file @ cfa76f02
......@@ -4,4 +4,4 @@
lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o
obj-y := iomap.o
obj-y := libgcc/ milli/ iomap.o
arch/parisc/lib/libgcc/Makefile 0 → 100644
View file @ cfa76f02
obj-y := __ashldi3.o __ashrdi3.o __clzsi2.o __divdi3.o __divsi3.o \
__lshrdi3.o __moddi3.o __modsi3.o __udivdi3.o \
__udivmoddi4.o __udivmodsi4.o __udivsi3.o \
__umoddi3.o __umodsi3.o __muldi3.o __umulsidi3.o
arch/parisc/lib/libgcc/__ashldi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u64 __ashldi3(u64 v, int cnt)
{
int c = cnt & 31;
u32 vl = (u32) v;
u32 vh = (u32) (v >> 32);
if (cnt & 32) {
vh = (vl << c);
vl = 0;
} else {
vh = (vh << c) + (vl >> (32 - c));
vl = (vl << c);
}
return ((u64) vh << 32) + vl;
}
EXPORT_SYMBOL(__ashldi3);
arch/parisc/lib/libgcc/__ashrdi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u64 __ashrdi3(u64 v, int cnt)
{
int c = cnt & 31;
u32 vl = (u32) v;
u32 vh = (u32) (v >> 32);
if (cnt & 32) {
vl = ((s32) vh >> c);
vh = (s32) vh >> 31;
} else {
vl = (vl >> c) + (vh << (32 - c));
vh = ((s32) vh >> c);
}
return ((u64) vh << 32) + vl;
}
EXPORT_SYMBOL(__ashrdi3);
arch/parisc/lib/libgcc/__clzsi2.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u32 __clzsi2(u32 v)
{
int p = 31;
if (v & 0xffff0000) {
p -= 16;
v >>= 16;
}
if (v & 0xff00) {
p -= 8;
v >>= 8;
}
if (v & 0xf0) {
p -= 4;
v >>= 4;
}
if (v & 0xc) {
p -= 2;
v >>= 2;
}
if (v & 0x2) {
p -= 1;
v >>= 1;
}
return p;
}
EXPORT_SYMBOL(__clzsi2);
arch/parisc/lib/libgcc/__divdi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
s64 __divdi3(s64 num, s64 den)
{
int minus = 0;
s64 v;
if (num < 0) {
num = -num;
minus = 1;
}
if (den < 0) {
den = -den;
minus ^= 1;
}
v = __udivmoddi4(num, den, NULL);
if (minus)
v = -v;
return v;
}
EXPORT_SYMBOL(__divdi3);
arch/parisc/lib/libgcc/__divsi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
s32 __divsi3(s32 num, s32 den)
{
int minus = 0;
s32 v;
if (num < 0) {
num = -num;
minus = 1;
}
if (den < 0) {
den = -den;
minus ^= 1;
}
v = __udivmodsi4(num, den, NULL);
if (minus)
v = -v;
return v;
}
EXPORT_SYMBOL(__divsi3);
arch/parisc/lib/libgcc/__lshrdi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u64 __lshrdi3(u64 v, int cnt)
{
int c = cnt & 31;
u32 vl = (u32) v;
u32 vh = (u32) (v >> 32);
if (cnt & 32) {
vl = (vh >> c);
vh = 0;
} else {
vl = (vl >> c) + (vh << (32 - c));
vh = (vh >> c);
}
return ((u64) vh << 32) + vl;
}
EXPORT_SYMBOL(__lshrdi3);
arch/parisc/lib/libgcc/__moddi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
s64 __moddi3(s64 num, s64 den)
{
int minus = 0;
s64 v;
if (num < 0) {
num = -num;
minus = 1;
}
if (den < 0) {
den = -den;
minus ^= 1;
}
(void)__udivmoddi4(num, den, (u64 *) & v);
if (minus)
v = -v;
return v;
}
EXPORT_SYMBOL(__moddi3);
arch/parisc/lib/libgcc/__modsi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
s32 __modsi3(s32 num, s32 den)
{
int minus = 0;
s32 v;
if (num < 0) {
num = -num;
minus = 1;
}
if (den < 0) {
den = -den;
minus ^= 1;
}
(void)__udivmodsi4(num, den, (u32 *) & v);
if (minus)
v = -v;
return v;
}
EXPORT_SYMBOL(__modsi3);
arch/parisc/lib/libgcc/__muldi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
union DWunion {
struct {
s32 high;
s32 low;
} s;
s64 ll;
};
s64 __muldi3(s64 u, s64 v)
{
const union DWunion uu = { .ll = u };
const union DWunion vv = { .ll = v };
union DWunion w = { .ll = __umulsidi3(uu.s.low, vv.s.low) };
w.s.high += ((u32)uu.s.low * (u32)vv.s.high
+ (u32)uu.s.high * (u32)vv.s.low);
return w.ll;
}
EXPORT_SYMBOL(__muldi3);
arch/parisc/lib/libgcc/__udivdi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u64 __udivdi3(u64 num, u64 den)
{
return __udivmoddi4(num, den, NULL);
}
EXPORT_SYMBOL(__udivdi3);
arch/parisc/lib/libgcc/__udivmoddi4.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p)
{
u64 quot = 0, qbit = 1;
if (den == 0) {
BUG();
}
/* Left-justify denominator and count shift */
while ((s64) den >= 0) {
den <<= 1;
qbit <<= 1;
}
while (qbit) {
if (den <= num) {
num -= den;
quot += qbit;
}
den >>= 1;
qbit >>= 1;
}
if (rem_p)
*rem_p = num;
return quot;
}
EXPORT_SYMBOL(__udivmoddi4);
arch/parisc/lib/libgcc/__udivmodsi4.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p)
{
u32 quot = 0, qbit = 1;
if (den == 0) {
BUG();
}
/* Left-justify denominator and count shift */
while ((s32) den >= 0) {
den <<= 1;
qbit <<= 1;
}
while (qbit) {
if (den <= num) {
num -= den;
quot += qbit;
}
den >>= 1;
qbit >>= 1;
}
if (rem_p)
*rem_p = num;
return quot;
}
EXPORT_SYMBOL(__udivmodsi4);
arch/parisc/lib/libgcc/__udivsi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u32 __udivsi3(u32 num, u32 den)
{
return __udivmodsi4(num, den, NULL);
}
EXPORT_SYMBOL(__udivsi3);
arch/parisc/lib/libgcc/__umoddi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u64 __umoddi3(u64 num, u64 den)
{
u64 v;
(void)__udivmoddi4(num, den, &v);
return v;
}
EXPORT_SYMBOL(__umoddi3);
arch/parisc/lib/libgcc/__umodsi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
u32 __umodsi3(u32 num, u32 den)
{
u32 v;
(void)__udivmodsi4(num, den, &v);
return v;
}
EXPORT_SYMBOL(__umodsi3);
arch/parisc/lib/libgcc/__umulsidi3.c 0 → 100644
View file @ cfa76f02
#include "libgcc.h"
#define __ll_B ((u32) 1 << (32 / 2))
#define __ll_lowpart(t) ((u32) (t) & (__ll_B - 1))
#define __ll_highpart(t) ((u32) (t) >> 16)
#define umul_ppmm(w1, w0, u, v) \
do { \
u32 __x0, __x1, __x2, __x3; \
u16 __ul, __vl, __uh, __vh; \
\
__ul = __ll_lowpart (u); \
__uh = __ll_highpart (u); \
__vl = __ll_lowpart (v); \
__vh = __ll_highpart (v); \
\
__x0 = (u32) __ul * __vl; \
__x1 = (u32) __ul * __vh; \
__x2 = (u32) __uh * __vl; \
__x3 = (u32) __uh * __vh; \
\
__x1 += __ll_highpart (__x0);/* this can't give carry */ \
__x1 += __x2; /* but this indeed can */ \
if (__x1 < __x2) /* did we get it? */ \
__x3 += __ll_B; /* yes, add it in the proper pos. */ \
\
(w1) = __x3 + __ll_highpart (__x1); \
(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
} while (0)
union DWunion {
struct {
s32 high;
s32 low;
} s;
s64 ll;
};
u64 __umulsidi3(u32 u, u32 v)
{
union DWunion __w;
umul_ppmm(__w.s.high, __w.s.low, u, v);
return __w.ll;
}
arch/parisc/lib/libgcc/libgcc.h 0 → 100644
View file @ cfa76f02
#ifndef _PA_LIBGCC_H_
#define _PA_LIBGCC_H_
#include <linux/types.h>
#include <linux/module.h>
/* Cribbed from klibc/libgcc/ */
u64 __ashldi3(u64 v, int cnt);
u64 __ashrdi3(u64 v, int cnt);
u32 __clzsi2(u32 v);
s64 __divdi3(s64 num, s64 den);
s32 __divsi3(s32 num, s32 den);
u64 __lshrdi3(u64 v, int cnt);
s64 __moddi3(s64 num, s64 den);
s32 __modsi3(s32 num, s32 den);
u64 __udivdi3(u64 num, u64 den);
u32 __udivsi3(u32 num, u32 den);
u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p);
u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p);
u64 __umulsidi3(u32 u, u32 v);
u64 __umoddi3(u64 num, u64 den);
u32 __umodsi3(u32 num, u32 den);
#endif /*_PA_LIBGCC_H_*/
arch/parisc/lib/memcpy.c
View file @ cfa76f02
......@@ -139,12 +139,12 @@ DECLARE_PER_CPU(struct exception_data, exception_data);
#define stw(_s,_t,_o,_a,_e) def_store_insn(stw,"r",_s,_t,_o,_a,_e)
#ifdef CONFIG_PREFETCH
extern inline void prefetch_src(const void *addr)
static inline void prefetch_src(const void *addr)
{
__asm__("ldw 0(" s_space ",%0), %%r0" : : "r" (addr));
}
extern inline void prefetch_dst(const void *addr)
static inline void prefetch_dst(const void *addr)
{
__asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr));
}
......
arch/parisc/lib/milli/Makefile 0 → 100644
View file @ cfa76f02
obj-y := dyncall.o divI.o divU.o remI.o remU.o div_const.o mulI.o
arch/parisc/lib/milli/divI.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#include "milli.h"
#ifdef L_divI
/* ROUTINES: $$divI, $$divoI
Single precision divide for signed binary integers.
The quotient is truncated towards zero.
The sign of the quotient is the XOR of the signs of the dividend and
divisor.
Divide by zero is trapped.
Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = quotient
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions:
. divisor is zero (traps with ADDIT,= 0,25,0)
. dividend==-2**31 and divisor==-1 and routine is $$divoI
. (traps with ADDO 26,25,0)
. Changes memory at the following places:
. NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Branchs to other millicode routines using BE
. $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
.
. For selected divisors, calls a divide by constant routine written by
. Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13.
.
. The only overflow case is -2**31 divided by -1.
. Both routines return -2**31 but only $$divoI traps. */
RDEFINE(temp,r1)
RDEFINE(retreg,ret1) /* r29 */
RDEFINE(temp1,arg0)
SUBSPA_MILLI_DIV
ATTR_MILLI
.import $$divI_2,millicode
.import $$divI_3,millicode
.import $$divI_4,millicode
.import $$divI_5,millicode
.import $$divI_6,millicode
.import $$divI_7,millicode
.import $$divI_8,millicode
.import $$divI_9,millicode
.import $$divI_10,millicode
.import $$divI_12,millicode
.import $$divI_14,millicode
.import $$divI_15,millicode
.export $$divI,millicode
.export $$divoI,millicode
.proc
.callinfo millicode
.entry
GSYM($$divoI)
comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */
GSYM($$divI)
ldo -1(arg1),temp /* is there at most one bit set ? */
and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */
addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */
b,n LREF(neg_denom)
LSYM(pow2)
addi,>= 0,arg0,retreg /* if numerator is negative, add the */
add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */
extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
extrs retreg,15,16,retreg /* retreg = retreg >> 16 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
ldi 0xcc,temp1 /* setup 0xcc in temp1 */
extru,= arg1,23,8,temp /* test denominator with 0xff00 */
extrs retreg,23,24,retreg /* retreg = retreg >> 8 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
ldi 0xaa,temp /* setup 0xaa in temp */
extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
extrs retreg,27,28,retreg /* retreg = retreg >> 4 */
and,= arg1,temp1,r0 /* test denominator with 0xcc */
extrs retreg,29,30,retreg /* retreg = retreg >> 2 */
and,= arg1,temp,r0 /* test denominator with 0xaa */
extrs retreg,30,31,retreg /* retreg = retreg >> 1 */
MILLIRETN
LSYM(neg_denom)
addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */
b,n LREF(regular_seq)
sub r0,arg1,temp /* make denominator positive */
comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */
ldo -1(temp),retreg /* is there at most one bit set ? */
and,= temp,retreg,r0 /* if so, the denominator is power of 2 */
b,n LREF(regular_seq)
sub r0,arg0,retreg /* negate numerator */
comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */
copy retreg,arg0 /* set up arg0, arg1 and temp */
copy temp,arg1 /* before branching to pow2 */
b LREF(pow2)
ldo -1(arg1),temp
LSYM(regular_seq)
comib,>>=,n 15,arg1,LREF(small_divisor)
add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
LSYM(normal)
subi 0,retreg,retreg /* make it positive */
sub 0,arg1,temp /* clear carry, */
/* negate the divisor */
ds 0,temp,0 /* set V-bit to the comple- */
/* ment of the divisor sign */
add retreg,retreg,retreg /* shift msb bit into carry */
ds r0,arg1,temp /* 1st divide step, if no carry */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 2nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 3rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 4th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 5th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 6th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 7th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 8th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 9th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 10th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 11th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 12th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 13th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 14th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 15th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 16th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 17th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 18th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 19th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 20th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 21st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 22nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 23rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 24th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 25th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 26th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 27th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 28th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 29th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 30th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 31st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 32nd divide step, */
addc retreg,retreg,retreg /* shift last retreg bit into retreg */
xor,>= arg0,arg1,0 /* get correct sign of quotient */
sub 0,retreg,retreg /* based on operand signs */
MILLIRETN
nop
LSYM(small_divisor)
#if defined(CONFIG_64BIT)
/* Clear the upper 32 bits of the arg1 register. We are working with */
/* small divisors (and 32-bit integers) We must not be mislead */
/* by "1" bits left in the upper 32 bits. */
depd %r0,31,32,%r25
#endif
blr,n arg1,r0
nop
/* table for divisor == 0,1, ... ,15 */
addit,= 0,arg1,r0 /* trap if divisor == 0 */
nop
MILLIRET /* divisor == 1 */
copy arg0,retreg
MILLI_BEN($$divI_2) /* divisor == 2 */
nop
MILLI_BEN($$divI_3) /* divisor == 3 */
nop
MILLI_BEN($$divI_4) /* divisor == 4 */
nop
MILLI_BEN($$divI_5) /* divisor == 5 */
nop
MILLI_BEN($$divI_6) /* divisor == 6 */
nop
MILLI_BEN($$divI_7) /* divisor == 7 */
nop
MILLI_BEN($$divI_8) /* divisor == 8 */
nop
MILLI_BEN($$divI_9) /* divisor == 9 */
nop
MILLI_BEN($$divI_10) /* divisor == 10 */
nop
b LREF(normal) /* divisor == 11 */
add,>= 0,arg0,retreg
MILLI_BEN($$divI_12) /* divisor == 12 */
nop
b LREF(normal) /* divisor == 13 */
add,>= 0,arg0,retreg
MILLI_BEN($$divI_14) /* divisor == 14 */
nop
MILLI_BEN($$divI_15) /* divisor == 15 */
nop
LSYM(negative1)
sub 0,arg0,retreg /* result is negation of dividend */
MILLIRET
addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */
.exit
.procend
.end
#endif
arch/parisc/lib/milli/divU.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#include "milli.h"
#ifdef L_divU
/* ROUTINE: $$divU
.
. Single precision divide for unsigned integers.
.
. Quotient is truncated towards zero.
. Traps on divide by zero.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = quotient
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions:
. divisor is zero
. Changes memory at the following places:
. NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Does not create a stack frame.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Branchs to other millicode routines using BE:
. $$divU_# for 3,5,6,7,9,10,12,14,15
.
. For selected small divisors calls the special divide by constant
. routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */
RDEFINE(temp,r1)
RDEFINE(retreg,ret1) /* r29 */
RDEFINE(temp1,arg0)
SUBSPA_MILLI_DIV
ATTR_MILLI
.export $$divU,millicode
.import $$divU_3,millicode
.import $$divU_5,millicode
.import $$divU_6,millicode
.import $$divU_7,millicode
.import $$divU_9,millicode
.import $$divU_10,millicode
.import $$divU_12,millicode
.import $$divU_14,millicode
.import $$divU_15,millicode
.proc
.callinfo millicode
.entry
GSYM($$divU)
/* The subtract is not nullified since it does no harm and can be used
by the two cases that branch back to "normal". */
ldo -1(arg1),temp /* is there at most one bit set ? */
and,= arg1,temp,r0 /* if so, denominator is power of 2 */
b LREF(regular_seq)
addit,= 0,arg1,0 /* trap for zero dvr */
copy arg0,retreg
extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
extru retreg,15,16,retreg /* retreg = retreg >> 16 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
ldi 0xcc,temp1 /* setup 0xcc in temp1 */
extru,= arg1,23,8,temp /* test denominator with 0xff00 */
extru retreg,23,24,retreg /* retreg = retreg >> 8 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
ldi 0xaa,temp /* setup 0xaa in temp */
extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
extru retreg,27,28,retreg /* retreg = retreg >> 4 */
and,= arg1,temp1,r0 /* test denominator with 0xcc */
extru retreg,29,30,retreg /* retreg = retreg >> 2 */
and,= arg1,temp,r0 /* test denominator with 0xaa */
extru retreg,30,31,retreg /* retreg = retreg >> 1 */
MILLIRETN
nop
LSYM(regular_seq)
comib,>= 15,arg1,LREF(special_divisor)
subi 0,arg1,temp /* clear carry, negate the divisor */
ds r0,temp,r0 /* set V-bit to 1 */
LSYM(normal)
add arg0,arg0,retreg /* shift msb bit into carry */
ds r0,arg1,temp /* 1st divide step, if no carry */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 2nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 3rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 4th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 5th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 6th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 7th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 8th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 9th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 10th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 11th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 12th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 13th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 14th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 15th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 16th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 17th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 18th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 19th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 20th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 21st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 22nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 23rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 24th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 25th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 26th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 27th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 28th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 29th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 30th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 31st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 32nd divide step, */
MILLIRET
addc retreg,retreg,retreg /* shift last retreg bit into retreg */
/* Handle the cases where divisor is a small constant or has high bit on. */
LSYM(special_divisor)
/* blr arg1,r0 */
/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */
/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
generating such a blr, comib sequence. A problem in nullification. So I
rewrote this code. */
#if defined(CONFIG_64BIT)
/* Clear the upper 32 bits of the arg1 register. We are working with
small divisors (and 32-bit unsigned integers) We must not be mislead
by "1" bits left in the upper 32 bits. */
depd %r0,31,32,%r25
#endif
comib,> 0,arg1,LREF(big_divisor)
nop
blr arg1,r0
nop
LSYM(zero_divisor) /* this label is here to provide external visibility */
addit,= 0,arg1,0 /* trap for zero dvr */
nop
MILLIRET /* divisor == 1 */
copy arg0,retreg
MILLIRET /* divisor == 2 */
extru arg0,30,31,retreg
MILLI_BEN($$divU_3) /* divisor == 3 */
nop
MILLIRET /* divisor == 4 */
extru arg0,29,30,retreg
MILLI_BEN($$divU_5) /* divisor == 5 */
nop
MILLI_BEN($$divU_6) /* divisor == 6 */
nop
MILLI_BEN($$divU_7) /* divisor == 7 */
nop
MILLIRET /* divisor == 8 */
extru arg0,28,29,retreg
MILLI_BEN($$divU_9) /* divisor == 9 */
nop
MILLI_BEN($$divU_10) /* divisor == 10 */
nop
b LREF(normal) /* divisor == 11 */
ds r0,temp,r0 /* set V-bit to 1 */
MILLI_BEN($$divU_12) /* divisor == 12 */
nop
b LREF(normal) /* divisor == 13 */
ds r0,temp,r0 /* set V-bit to 1 */
MILLI_BEN($$divU_14) /* divisor == 14 */
nop
MILLI_BEN($$divU_15) /* divisor == 15 */
nop
/* Handle the case where the high bit is on in the divisor.
Compute: if( dividend>=divisor) quotient=1; else quotient=0;
Note: dividend>==divisor iff dividend-divisor does not borrow
and not borrow iff carry. */
LSYM(big_divisor)
sub arg0,arg1,r0
MILLIRET
addc r0,r0,retreg
.exit
.procend
.end
#endif
arch/parisc/lib/milli/div_const.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#include "milli.h"
#ifdef L_div_const
/* ROUTINE: $$divI_2
. $$divI_3 $$divU_3
. $$divI_4
. $$divI_5 $$divU_5
. $$divI_6 $$divU_6
. $$divI_7 $$divU_7
. $$divI_8
. $$divI_9 $$divU_9
. $$divI_10 $$divU_10
.
. $$divI_12 $$divU_12
.
. $$divI_14 $$divU_14
. $$divI_15 $$divU_15
. $$divI_16
. $$divI_17 $$divU_17
.
. Divide by selected constants for single precision binary integers.
INPUT REGISTERS:
. arg0 == dividend
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = quotient
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions: NONE
. Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Does not create a stack frame.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Calls other millicode routines using mrp: NONE
. Calls other millicode routines: NONE */
/* TRUNCATED DIVISION BY SMALL INTEGERS
We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
(with y fixed).
Let a = floor(z/y), for some choice of z. Note that z will be
chosen so that division by z is cheap.
Let r be the remainder(z/y). In other words, r = z - ay.
Now, our method is to choose a value for b such that
q'(x) = floor((ax+b)/z)
is equal to q(x) over as large a range of x as possible. If the
two are equal over a sufficiently large range, and if it is easy to
form the product (ax), and it is easy to divide by z, then we can
perform the division much faster than the general division algorithm.
So, we want the following to be true:
. For x in the following range:
.
. ky <= x < (k+1)y
.
. implies that
.
. k <= (ax+b)/z < (k+1)
We want to determine b such that this is true for all k in the
range {0..K} for some maximum K.
Since (ax+b) is an increasing function of x, we can take each
bound separately to determine the "best" value for b.
(ax+b)/z < (k+1) implies
(a((k+1)y-1)+b < (k+1)z implies
b < a + (k+1)(z-ay) implies
b < a + (k+1)r
This needs to be true for all k in the range {0..K}. In
particular, it is true for k = 0 and this leads to a maximum
acceptable value for b.
b < a+r or b <= a+r-1
Taking the other bound, we have
k <= (ax+b)/z implies
k <= (aky+b)/z implies
k(z-ay) <= b implies
kr <= b
Clearly, the largest range for k will be achieved by maximizing b,
when r is not zero. When r is zero, then the simplest choice for b
is 0. When r is not 0, set
. b = a+r-1
Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
for all x in the range:
. 0 <= x < (K+1)y
We need to determine what K is. Of our two bounds,
. b < a+(k+1)r is satisfied for all k >= 0, by construction.
The other bound is
. kr <= b
This is always true if r = 0. If r is not 0 (the usual case), then
K = floor((a+r-1)/r), is the maximum value for k.
Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
answer for q(x) = floor(x/y) when x is in the range
(0,(K+1)y-1) K = floor((a+r-1)/r)
To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
the formula for q'(x) yields the correct value of q(x) for all x
representable by a single word in HPPA.
We are also constrained in that computing the product (ax), adding
b, and dividing by z must all be done quickly, otherwise we will be
better off going through the general algorithm using the DS
instruction, which uses approximately 70 cycles.
For each y, there is a choice of z which satisfies the constraints
for (K+1)y >= 2**32. We may not, however, be able to satisfy the
timing constraints for arbitrary y. It seems that z being equal to
a power of 2 or a power of 2 minus 1 is as good as we can do, since
it minimizes the time to do division by z. We want the choice of z
to also result in a value for (a) that minimizes the computation of
the product (ax). This is best achieved if (a) has a regular bit
pattern (so the multiplication can be done with shifts and adds).
The value of (a) also needs to be less than 2**32 so the product is
always guaranteed to fit in 2 words.
In actual practice, the following should be done:
1) For negative x, you should take the absolute value and remember
. the fact so that the result can be negated. This obviously does
. not apply in the unsigned case.
2) For even y, you should factor out the power of 2 that divides y
. and divide x by it. You can then proceed by dividing by the
. odd factor of y.
Here is a table of some odd values of y, and corresponding choices
for z which are "good".
y z r a (hex) max x (hex)
3 2**32 1 55555555 100000001
5 2**32 1 33333333 100000003
7 2**24-1 0 249249 (infinite)
9 2**24-1 0 1c71c7 (infinite)
11 2**20-1 0 1745d (infinite)
13 2**24-1 0 13b13b (infinite)
15 2**32 1 11111111 10000000d
17 2**32 1 f0f0f0f 10000000f
If r is 1, then b = a+r-1 = a. This simplifies the computation
of (ax+b), since you can compute (x+1)(a) instead. If r is 0,
then b = 0 is ok to use which simplifies (ax+b).
The bit patterns for 55555555, 33333333, and 11111111 are obviously
very regular. The bit patterns for the other values of a above are:
y (hex) (binary)
7 249249 001001001001001001001001 << regular >>
9 1c71c7 000111000111000111000111 << regular >>
11 1745d 000000010111010001011101 << irregular >>
13 13b13b 000100111011000100111011 << irregular >>
The bit patterns for (a) corresponding to (y) of 11 and 13 may be
too irregular to warrant using this method.
When z is a power of 2 minus 1, then the division by z is slightly
more complicated, involving an iterative solution.
The code presented here solves division by 1 through 17, except for
11 and 13. There are algorithms for both signed and unsigned
quantities given.
TIMINGS (cycles)
divisor positive negative unsigned
. 1 2 2 2
. 2 4 4 2
. 3 19 21 19
. 4 4 4 2
. 5 18 22 19
. 6 19 22 19
. 8 4 4 2
. 10 18 19 17
. 12 18 20 18
. 15 16 18 16
. 16 4 4 2
. 17 16 18 16
Now, the algorithm for 7, 9, and 14 is an iterative one. That is,
a loop body is executed until the tentative quotient is 0. The
number of times the loop body is executed varies depending on the
dividend, but is never more than two times. If the dividend is
less than the divisor, then the loop body is not executed at all.
Each iteration adds 4 cycles to the timings.
divisor positive negative unsigned
. 7 19+4n 20+4n 20+4n n = number of iterations
. 9 21+4n 22+4n 21+4n
. 14 21+4n 22+4n 20+4n
To give an idea of how the number of iterations varies, here is a
table of dividend versus number of iterations when dividing by 7.
smallest largest required
dividend dividend iterations
. 0 6 0
. 7 0x6ffffff 1
0x1000006 0xffffffff 2
There is some overlap in the range of numbers requiring 1 and 2
iterations. */
RDEFINE(t2,r1)
RDEFINE(x2,arg0) /* r26 */
RDEFINE(t1,arg1) /* r25 */
RDEFINE(x1,ret1) /* r29 */
SUBSPA_MILLI_DIV
ATTR_MILLI
.proc
.callinfo millicode
.entry
/* NONE of these routines require a stack frame
ALL of these routines are unwindable from millicode */
GSYM($$divide_by_constant)
.export $$divide_by_constant,millicode
/* Provides a "nice" label for the code covered by the unwind descriptor
for things like gprof. */
/* DIVISION BY 2 (shift by 1) */
GSYM($$divI_2)
.export $$divI_2,millicode
comclr,>= arg0,0,0
addi 1,arg0,arg0
MILLIRET
extrs arg0,30,31,ret1
/* DIVISION BY 4 (shift by 2) */
GSYM($$divI_4)
.export $$divI_4,millicode
comclr,>= arg0,0,0
addi 3,arg0,arg0
MILLIRET
extrs arg0,29,30,ret1
/* DIVISION BY 8 (shift by 3) */
GSYM($$divI_8)
.export $$divI_8,millicode
comclr,>= arg0,0,0
addi 7,arg0,arg0
MILLIRET
extrs arg0,28,29,ret1
/* DIVISION BY 16 (shift by 4) */
GSYM($$divI_16)
.export $$divI_16,millicode
comclr,>= arg0,0,0
addi 15,arg0,arg0
MILLIRET
extrs arg0,27,28,ret1
/****************************************************************************
*
* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
*
* includes 3,5,15,17 and also 6,10,12
*
****************************************************************************/
/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
GSYM($$divI_3)
.export $$divI_3,millicode
comb,<,N x2,0,LREF(neg3)
addi 1,x2,x2 /* this cannot overflow */
extru x2,1,2,x1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(pos)
addc x1,0,x1
LSYM(neg3)
subi 1,x2,x2 /* this cannot overflow */
extru x2,1,2,x1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(neg)
addc x1,0,x1
GSYM($$divU_3)
.export $$divU_3,millicode
addi 1,x2,x2 /* this CAN overflow */
addc 0,0,x1
shd x1,x2,30,t1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(pos)
addc x1,t1,x1
/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
GSYM($$divI_5)
.export $$divI_5,millicode
comb,<,N x2,0,LREF(neg5)
addi 3,x2,t1 /* this cannot overflow */
sh1add x2,t1,x2 /* multiply by 3 to get started */
b LREF(pos)
addc 0,0,x1
LSYM(neg5)
sub 0,x2,x2 /* negate x2 */
addi 1,x2,x2 /* this cannot overflow */
shd 0,x2,31,x1 /* get top bit (can be 1) */
sh1add x2,x2,x2 /* multiply by 3 to get started */
b LREF(neg)
addc x1,0,x1
GSYM($$divU_5)
.export $$divU_5,millicode
addi 1,x2,x2 /* this CAN overflow */
addc 0,0,x1
shd x1,x2,31,t1 /* multiply by 3 to get started */
sh1add x2,x2,x2
b LREF(pos)
addc t1,x1,x1
/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */
GSYM($$divI_6)
.export $$divI_6,millicode
comb,<,N x2,0,LREF(neg6)
extru x2,30,31,x2 /* divide by 2 */
addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */
sh2add x2,t1,x2 /* multiply by 5 to get started */
b LREF(pos)
addc 0,0,x1
LSYM(neg6)
subi 2,x2,x2 /* negate, divide by 2, and add 1 */
/* negation and adding 1 are done */
/* at the same time by the SUBI */
extru x2,30,31,x2
shd 0,x2,30,x1
sh2add x2,x2,x2 /* multiply by 5 to get started */
b LREF(neg)
addc x1,0,x1
GSYM($$divU_6)
.export $$divU_6,millicode
extru x2,30,31,x2 /* divide by 2 */
addi 1,x2,x2 /* cannot carry */
shd 0,x2,30,x1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(pos)
addc x1,0,x1
/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
GSYM($$divU_10)
.export $$divU_10,millicode
extru x2,30,31,x2 /* divide by 2 */
addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */
sh1add x2,t1,x2 /* multiply by 3 to get started */
addc 0,0,x1
LSYM(pos)
shd x1,x2,28,t1 /* multiply by 0x11 */
shd x2,0,28,t2
add x2,t2,x2
addc x1,t1,x1
LSYM(pos_for_17)
shd x1,x2,24,t1 /* multiply by 0x101 */
shd x2,0,24,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,16,t1 /* multiply by 0x10001 */
shd x2,0,16,t2
add x2,t2,x2
MILLIRET
addc x1,t1,x1
GSYM($$divI_10)
.export $$divI_10,millicode
comb,< x2,0,LREF(neg10)
copy 0,x1
extru x2,30,31,x2 /* divide by 2 */
addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */
sh1add x2,x2,x2 /* multiply by 3 to get started */
LSYM(neg10)
subi 2,x2,x2 /* negate, divide by 2, and add 1 */
/* negation and adding 1 are done */
/* at the same time by the SUBI */
extru x2,30,31,x2
sh1add x2,x2,x2 /* multiply by 3 to get started */
LSYM(neg)
shd x1,x2,28,t1 /* multiply by 0x11 */
shd x2,0,28,t2
add x2,t2,x2
addc x1,t1,x1
LSYM(neg_for_17)
shd x1,x2,24,t1 /* multiply by 0x101 */
shd x2,0,24,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,16,t1 /* multiply by 0x10001 */
shd x2,0,16,t2
add x2,t2,x2
addc x1,t1,x1
MILLIRET
sub 0,x1,x1
/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
GSYM($$divI_12)
.export $$divI_12,millicode
comb,< x2,0,LREF(neg12)
copy 0,x1
extru x2,29,30,x2 /* divide by 4 */
addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */
sh2add x2,x2,x2 /* multiply by 5 to get started */
LSYM(neg12)
subi 4,x2,x2 /* negate, divide by 4, and add 1 */
/* negation and adding 1 are done */
/* at the same time by the SUBI */
extru x2,29,30,x2
b LREF(neg)
sh2add x2,x2,x2 /* multiply by 5 to get started */
GSYM($$divU_12)
.export $$divU_12,millicode
extru x2,29,30,x2 /* divide by 4 */
addi 5,x2,t1 /* cannot carry */
sh2add x2,t1,x2 /* multiply by 5 to get started */
b LREF(pos)
addc 0,0,x1
/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
GSYM($$divI_15)
.export $$divI_15,millicode
comb,< x2,0,LREF(neg15)
copy 0,x1
addib,tr 1,x2,LREF(pos)+4
shd x1,x2,28,t1
LSYM(neg15)
b LREF(neg)
subi 1,x2,x2
GSYM($$divU_15)
.export $$divU_15,millicode
addi 1,x2,x2 /* this CAN overflow */
b LREF(pos)
addc 0,0,x1
/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */
GSYM($$divI_17)
.export $$divI_17,millicode
comb,<,n x2,0,LREF(neg17)
addi 1,x2,x2 /* this cannot overflow */
shd 0,x2,28,t1 /* multiply by 0xf to get started */
shd x2,0,28,t2
sub t2,x2,x2
b LREF(pos_for_17)
subb t1,0,x1
LSYM(neg17)
subi 1,x2,x2 /* this cannot overflow */
shd 0,x2,28,t1 /* multiply by 0xf to get started */
shd x2,0,28,t2
sub t2,x2,x2
b LREF(neg_for_17)
subb t1,0,x1
GSYM($$divU_17)
.export $$divU_17,millicode
addi 1,x2,x2 /* this CAN overflow */
addc 0,0,x1
shd x1,x2,28,t1 /* multiply by 0xf to get started */
LSYM(u17)
shd x2,0,28,t2
sub t2,x2,x2
b LREF(pos_for_17)
subb t1,x1,x1
/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
includes 7,9 and also 14
z = 2**24-1
r = z mod x = 0
so choose b = 0
Also, in order to divide by z = 2**24-1, we approximate by dividing
by (z+1) = 2**24 (which is easy), and then correcting.
(ax) = (z+1)q' + r
. = zq' + (q'+r)
So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
Then the true remainder of (ax)/z is (q'+r). Repeat the process
with this new remainder, adding the tentative quotients together,
until a tentative quotient is 0 (and then we are done). There is
one last correction to be done. It is possible that (q'+r) = z.
If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But,
in fact, we need to add 1 more to the quotient. Now, it turns
out that this happens if and only if the original value x is
an exact multiple of y. So, to avoid a three instruction test at
the end, instead use 1 instruction to add 1 to x at the beginning. */
/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
GSYM($$divI_7)
.export $$divI_7,millicode
comb,<,n x2,0,LREF(neg7)
LSYM(7)
addi 1,x2,x2 /* cannot overflow */
shd 0,x2,29,x1
sh3add x2,x2,x2
addc x1,0,x1
LSYM(pos7)
shd x1,x2,26,t1
shd x2,0,26,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,20,t1
shd x2,0,20,t2
add x2,t2,x2
addc x1,t1,t1
/* computed <t1,x2>. Now divide it by (2**24 - 1) */
copy 0,x1
shd,= t1,x2,24,t1 /* tentative quotient */
LSYM(1)
addb,tr t1,x1,LREF(2) /* add to previous quotient */
extru x2,31,24,x2 /* new remainder (unadjusted) */
MILLIRETN
LSYM(2)
addb,tr t1,x2,LREF(1) /* adjust remainder */
extru,= x2,7,8,t1 /* new quotient */
LSYM(neg7)
subi 1,x2,x2 /* negate x2 and add 1 */
LSYM(8)
shd 0,x2,29,x1
sh3add x2,x2,x2
addc x1,0,x1
LSYM(neg7_shift)
shd x1,x2,26,t1
shd x2,0,26,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,20,t1
shd x2,0,20,t2
add x2,t2,x2
addc x1,t1,t1
/* computed <t1,x2>. Now divide it by (2**24 - 1) */
copy 0,x1
shd,= t1,x2,24,t1 /* tentative quotient */
LSYM(3)
addb,tr t1,x1,LREF(4) /* add to previous quotient */
extru x2,31,24,x2 /* new remainder (unadjusted) */
MILLIRET
sub 0,x1,x1 /* negate result */
LSYM(4)
addb,tr t1,x2,LREF(3) /* adjust remainder */
extru,= x2,7,8,t1 /* new quotient */
GSYM($$divU_7)
.export $$divU_7,millicode
addi 1,x2,x2 /* can carry */
addc 0,0,x1
shd x1,x2,29,t1
sh3add x2,x2,x2
b LREF(pos7)
addc t1,x1,x1
/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
GSYM($$divI_9)
.export $$divI_9,millicode
comb,<,n x2,0,LREF(neg9)
addi 1,x2,x2 /* cannot overflow */
shd 0,x2,29,t1
shd x2,0,29,t2
sub t2,x2,x2
b LREF(pos7)
subb t1,0,x1
LSYM(neg9)
subi 1,x2,x2 /* negate and add 1 */
shd 0,x2,29,t1
shd x2,0,29,t2
sub t2,x2,x2
b LREF(neg7_shift)
subb t1,0,x1
GSYM($$divU_9)
.export $$divU_9,millicode
addi 1,x2,x2 /* can carry */
addc 0,0,x1
shd x1,x2,29,t1
shd x2,0,29,t2
sub t2,x2,x2
b LREF(pos7)
subb t1,x1,x1
/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
GSYM($$divI_14)
.export $$divI_14,millicode
comb,<,n x2,0,LREF(neg14)
GSYM($$divU_14)
.export $$divU_14,millicode
b LREF(7) /* go to 7 case */
extru x2,30,31,x2 /* divide by 2 */
LSYM(neg14)
subi 2,x2,x2 /* negate (and add 2) */
b LREF(8)
extru x2,30,31,x2 /* divide by 2 */
.exit
.procend
.end
#endif
arch/parisc/lib/milli/dyncall.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#include "milli.h"
#ifdef L_dyncall
SUBSPA_MILLI
ATTR_DATA
GSYM($$dyncall)
.export $$dyncall,millicode
.proc
.callinfo millicode
.entry
bb,>=,n %r22,30,LREF(1) ; branch if not plabel address
depi 0,31,2,%r22 ; clear the two least significant bits
ldw 4(%r22),%r19 ; load new LTP value
ldw 0(%r22),%r22 ; load address of target
LSYM(1)
bv %r0(%r22) ; branch to the real target
stw %r2,-24(%r30) ; save return address into frame marker
.exit
.procend
#endif
arch/parisc/lib/milli/milli.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#ifdef CONFIG_64BIT
.level 2.0w
#endif
/* Hardware General Registers. */
r0: .reg %r0
r1: .reg %r1
r2: .reg %r2
r3: .reg %r3
r4: .reg %r4
r5: .reg %r5
r6: .reg %r6
r7: .reg %r7
r8: .reg %r8
r9: .reg %r9
r10: .reg %r10
r11: .reg %r11
r12: .reg %r12
r13: .reg %r13
r14: .reg %r14
r15: .reg %r15
r16: .reg %r16
r17: .reg %r17
r18: .reg %r18
r19: .reg %r19
r20: .reg %r20
r21: .reg %r21
r22: .reg %r22
r23: .reg %r23
r24: .reg %r24
r25: .reg %r25
r26: .reg %r26
r27: .reg %r27
r28: .reg %r28
r29: .reg %r29
r30: .reg %r30
r31: .reg %r31
/* Hardware Space Registers. */
sr0: .reg %sr0
sr1: .reg %sr1
sr2: .reg %sr2
sr3: .reg %sr3
sr4: .reg %sr4
sr5: .reg %sr5
sr6: .reg %sr6
sr7: .reg %sr7
/* Hardware Floating Point Registers. */
fr0: .reg %fr0
fr1: .reg %fr1
fr2: .reg %fr2
fr3: .reg %fr3
fr4: .reg %fr4
fr5: .reg %fr5
fr6: .reg %fr6
fr7: .reg %fr7
fr8: .reg %fr8
fr9: .reg %fr9
fr10: .reg %fr10
fr11: .reg %fr11
fr12: .reg %fr12
fr13: .reg %fr13
fr14: .reg %fr14
fr15: .reg %fr15
/* Hardware Control Registers. */
cr11: .reg %cr11
sar: .reg %cr11 /* Shift Amount Register */
/* Software Architecture General Registers. */
rp: .reg r2 /* return pointer */
#ifdef CONFIG_64BIT
mrp: .reg r2 /* millicode return pointer */
#else
mrp: .reg r31 /* millicode return pointer */
#endif
ret0: .reg r28 /* return value */
ret1: .reg r29 /* return value (high part of double) */
sp: .reg r30 /* stack pointer */
dp: .reg r27 /* data pointer */
arg0: .reg r26 /* argument */
arg1: .reg r25 /* argument or high part of double argument */
arg2: .reg r24 /* argument */
arg3: .reg r23 /* argument or high part of double argument */
/* Software Architecture Space Registers. */
/* sr0 ; return link from BLE */
sret: .reg sr1 /* return value */
sarg: .reg sr1 /* argument */
/* sr4 ; PC SPACE tracker */
/* sr5 ; process private data */
/* Frame Offsets (millicode convention!) Used when calling other
millicode routines. Stack unwinding is dependent upon these
definitions. */
r31_slot: .equ -20 /* "current RP" slot */
sr0_slot: .equ -16 /* "static link" slot */
#if defined(CONFIG_64BIT)
mrp_slot: .equ -16 /* "current RP" slot */
psp_slot: .equ -8 /* "previous SP" slot */
#else
mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */
#endif
#define DEFINE(name,value)name: .EQU value
#define RDEFINE(name,value)name: .REG value
#ifdef milliext
#define MILLI_BE(lbl) BE lbl(sr7,r0)
#define MILLI_BEN(lbl) BE,n lbl(sr7,r0)
#define MILLI_BLE(lbl) BLE lbl(sr7,r0)
#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0)
#define MILLIRETN BE,n 0(sr0,mrp)
#define MILLIRET BE 0(sr0,mrp)
#define MILLI_RETN BE,n 0(sr0,mrp)
#define MILLI_RET BE 0(sr0,mrp)
#else
#define MILLI_BE(lbl) B lbl
#define MILLI_BEN(lbl) B,n lbl
#define MILLI_BLE(lbl) BL lbl,mrp
#define MILLI_BLEN(lbl) BL,n lbl,mrp
#define MILLIRETN BV,n 0(mrp)
#define MILLIRET BV 0(mrp)
#define MILLI_RETN BV,n 0(mrp)
#define MILLI_RET BV 0(mrp)
#endif
#define CAT(a,b) a##b
#define SUBSPA_MILLI .section .text
#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
#define ATTR_MILLI
#define SUBSPA_DATA .section .data
#define ATTR_DATA
#define GLOBAL $global$
#define GSYM(sym) !sym:
#define LSYM(sym) !CAT(.L,sym:)
#define LREF(sym) CAT(.L,sym)
#ifdef L_dyncall
SUBSPA_MILLI
ATTR_DATA
GSYM($$dyncall)
.export $$dyncall,millicode
.proc
.callinfo millicode
.entry
bb,>=,n %r22,30,LREF(1) ; branch if not plabel address
depi 0,31,2,%r22 ; clear the two least significant bits
ldw 4(%r22),%r19 ; load new LTP value
ldw 0(%r22),%r22 ; load address of target
LSYM(1)
bv %r0(%r22) ; branch to the real target
stw %r2,-24(%r30) ; save return address into frame marker
.exit
.procend
#endif
#ifdef L_divI
/* ROUTINES: $$divI, $$divoI
Single precision divide for signed binary integers.
The quotient is truncated towards zero.
The sign of the quotient is the XOR of the signs of the dividend and
divisor.
Divide by zero is trapped.
Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = quotient
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions:
. divisor is zero (traps with ADDIT,= 0,25,0)
. dividend==-2**31 and divisor==-1 and routine is $$divoI
. (traps with ADDO 26,25,0)
. Changes memory at the following places:
. NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Branchs to other millicode routines using BE
. $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
.
. For selected divisors, calls a divide by constant routine written by
. Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13.
.
. The only overflow case is -2**31 divided by -1.
. Both routines return -2**31 but only $$divoI traps. */
RDEFINE(temp,r1)
RDEFINE(retreg,ret1) /* r29 */
RDEFINE(temp1,arg0)
SUBSPA_MILLI_DIV
ATTR_MILLI
.import $$divI_2,millicode
.import $$divI_3,millicode
.import $$divI_4,millicode
.import $$divI_5,millicode
.import $$divI_6,millicode
.import $$divI_7,millicode
.import $$divI_8,millicode
.import $$divI_9,millicode
.import $$divI_10,millicode
.import $$divI_12,millicode
.import $$divI_14,millicode
.import $$divI_15,millicode
.export $$divI,millicode
.export $$divoI,millicode
.proc
.callinfo millicode
.entry
GSYM($$divoI)
comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */
GSYM($$divI)
ldo -1(arg1),temp /* is there at most one bit set ? */
and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */
addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */
b,n LREF(neg_denom)
LSYM(pow2)
addi,>= 0,arg0,retreg /* if numerator is negative, add the */
add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */
extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
extrs retreg,15,16,retreg /* retreg = retreg >> 16 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
ldi 0xcc,temp1 /* setup 0xcc in temp1 */
extru,= arg1,23,8,temp /* test denominator with 0xff00 */
extrs retreg,23,24,retreg /* retreg = retreg >> 8 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
ldi 0xaa,temp /* setup 0xaa in temp */
extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
extrs retreg,27,28,retreg /* retreg = retreg >> 4 */
and,= arg1,temp1,r0 /* test denominator with 0xcc */
extrs retreg,29,30,retreg /* retreg = retreg >> 2 */
and,= arg1,temp,r0 /* test denominator with 0xaa */
extrs retreg,30,31,retreg /* retreg = retreg >> 1 */
MILLIRETN
LSYM(neg_denom)
addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */
b,n LREF(regular_seq)
sub r0,arg1,temp /* make denominator positive */
comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */
ldo -1(temp),retreg /* is there at most one bit set ? */
and,= temp,retreg,r0 /* if so, the denominator is power of 2 */
b,n LREF(regular_seq)
sub r0,arg0,retreg /* negate numerator */
comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */
copy retreg,arg0 /* set up arg0, arg1 and temp */
copy temp,arg1 /* before branching to pow2 */
b LREF(pow2)
ldo -1(arg1),temp
LSYM(regular_seq)
comib,>>=,n 15,arg1,LREF(small_divisor)
add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
LSYM(normal)
subi 0,retreg,retreg /* make it positive */
sub 0,arg1,temp /* clear carry, */
/* negate the divisor */
ds 0,temp,0 /* set V-bit to the comple- */
/* ment of the divisor sign */
add retreg,retreg,retreg /* shift msb bit into carry */
ds r0,arg1,temp /* 1st divide step, if no carry */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 2nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 3rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 4th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 5th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 6th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 7th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 8th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 9th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 10th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 11th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 12th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 13th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 14th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 15th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 16th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 17th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 18th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 19th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 20th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 21st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 22nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 23rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 24th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 25th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 26th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 27th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 28th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 29th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 30th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 31st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 32nd divide step, */
addc retreg,retreg,retreg /* shift last retreg bit into retreg */
xor,>= arg0,arg1,0 /* get correct sign of quotient */
sub 0,retreg,retreg /* based on operand signs */
MILLIRETN
nop
LSYM(small_divisor)
#if defined(CONFIG_64BIT)
/* Clear the upper 32 bits of the arg1 register. We are working with */
/* small divisors (and 32-bit integers) We must not be mislead */
/* by "1" bits left in the upper 32 bits. */
depd %r0,31,32,%r25
#endif
blr,n arg1,r0
nop
/* table for divisor == 0,1, ... ,15 */
addit,= 0,arg1,r0 /* trap if divisor == 0 */
nop
MILLIRET /* divisor == 1 */
copy arg0,retreg
MILLI_BEN($$divI_2) /* divisor == 2 */
nop
MILLI_BEN($$divI_3) /* divisor == 3 */
nop
MILLI_BEN($$divI_4) /* divisor == 4 */
nop
MILLI_BEN($$divI_5) /* divisor == 5 */
nop
MILLI_BEN($$divI_6) /* divisor == 6 */
nop
MILLI_BEN($$divI_7) /* divisor == 7 */
nop
MILLI_BEN($$divI_8) /* divisor == 8 */
nop
MILLI_BEN($$divI_9) /* divisor == 9 */
nop
MILLI_BEN($$divI_10) /* divisor == 10 */
nop
b LREF(normal) /* divisor == 11 */
add,>= 0,arg0,retreg
MILLI_BEN($$divI_12) /* divisor == 12 */
nop
b LREF(normal) /* divisor == 13 */
add,>= 0,arg0,retreg
MILLI_BEN($$divI_14) /* divisor == 14 */
nop
MILLI_BEN($$divI_15) /* divisor == 15 */
nop
LSYM(negative1)
sub 0,arg0,retreg /* result is negation of dividend */
MILLIRET
addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */
.exit
.procend
.end
#endif
#ifdef L_divU
/* ROUTINE: $$divU
.
. Single precision divide for unsigned integers.
.
. Quotient is truncated towards zero.
. Traps on divide by zero.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = quotient
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions:
. divisor is zero
. Changes memory at the following places:
. NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Does not create a stack frame.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Branchs to other millicode routines using BE:
. $$divU_# for 3,5,6,7,9,10,12,14,15
.
. For selected small divisors calls the special divide by constant
. routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */
RDEFINE(temp,r1)
RDEFINE(retreg,ret1) /* r29 */
RDEFINE(temp1,arg0)
SUBSPA_MILLI_DIV
ATTR_MILLI
.export $$divU,millicode
.import $$divU_3,millicode
.import $$divU_5,millicode
.import $$divU_6,millicode
.import $$divU_7,millicode
.import $$divU_9,millicode
.import $$divU_10,millicode
.import $$divU_12,millicode
.import $$divU_14,millicode
.import $$divU_15,millicode
.proc
.callinfo millicode
.entry
GSYM($$divU)
/* The subtract is not nullified since it does no harm and can be used
by the two cases that branch back to "normal". */
ldo -1(arg1),temp /* is there at most one bit set ? */
and,= arg1,temp,r0 /* if so, denominator is power of 2 */
b LREF(regular_seq)
addit,= 0,arg1,0 /* trap for zero dvr */
copy arg0,retreg
extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */
extru retreg,15,16,retreg /* retreg = retreg >> 16 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */
ldi 0xcc,temp1 /* setup 0xcc in temp1 */
extru,= arg1,23,8,temp /* test denominator with 0xff00 */
extru retreg,23,24,retreg /* retreg = retreg >> 8 */
or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */
ldi 0xaa,temp /* setup 0xaa in temp */
extru,= arg1,27,4,r0 /* test denominator with 0xf0 */
extru retreg,27,28,retreg /* retreg = retreg >> 4 */
and,= arg1,temp1,r0 /* test denominator with 0xcc */
extru retreg,29,30,retreg /* retreg = retreg >> 2 */
and,= arg1,temp,r0 /* test denominator with 0xaa */
extru retreg,30,31,retreg /* retreg = retreg >> 1 */
MILLIRETN
nop
LSYM(regular_seq)
comib,>= 15,arg1,LREF(special_divisor)
subi 0,arg1,temp /* clear carry, negate the divisor */
ds r0,temp,r0 /* set V-bit to 1 */
LSYM(normal)
add arg0,arg0,retreg /* shift msb bit into carry */
ds r0,arg1,temp /* 1st divide step, if no carry */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 2nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 3rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 4th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 5th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 6th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 7th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 8th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 9th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 10th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 11th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 12th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 13th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 14th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 15th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 16th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 17th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 18th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 19th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 20th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 21st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 22nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 23rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 24th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 25th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 26th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 27th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 28th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 29th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 30th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 31st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds temp,arg1,temp /* 32nd divide step, */
MILLIRET
addc retreg,retreg,retreg /* shift last retreg bit into retreg */
/* Handle the cases where divisor is a small constant or has high bit on. */
LSYM(special_divisor)
/* blr arg1,r0 */
/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */
/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
generating such a blr, comib sequence. A problem in nullification. So I
rewrote this code. */
#if defined(CONFIG_64BIT)
/* Clear the upper 32 bits of the arg1 register. We are working with
small divisors (and 32-bit unsigned integers) We must not be mislead
by "1" bits left in the upper 32 bits. */
depd %r0,31,32,%r25
#endif
comib,> 0,arg1,LREF(big_divisor)
nop
blr arg1,r0
nop
LSYM(zero_divisor) /* this label is here to provide external visibility */
addit,= 0,arg1,0 /* trap for zero dvr */
nop
MILLIRET /* divisor == 1 */
copy arg0,retreg
MILLIRET /* divisor == 2 */
extru arg0,30,31,retreg
MILLI_BEN($$divU_3) /* divisor == 3 */
nop
MILLIRET /* divisor == 4 */
extru arg0,29,30,retreg
MILLI_BEN($$divU_5) /* divisor == 5 */
nop
MILLI_BEN($$divU_6) /* divisor == 6 */
nop
MILLI_BEN($$divU_7) /* divisor == 7 */
nop
MILLIRET /* divisor == 8 */
extru arg0,28,29,retreg
MILLI_BEN($$divU_9) /* divisor == 9 */
nop
MILLI_BEN($$divU_10) /* divisor == 10 */
nop
b LREF(normal) /* divisor == 11 */
ds r0,temp,r0 /* set V-bit to 1 */
MILLI_BEN($$divU_12) /* divisor == 12 */
nop
b LREF(normal) /* divisor == 13 */
ds r0,temp,r0 /* set V-bit to 1 */
MILLI_BEN($$divU_14) /* divisor == 14 */
nop
MILLI_BEN($$divU_15) /* divisor == 15 */
nop
/* Handle the case where the high bit is on in the divisor.
Compute: if( dividend>=divisor) quotient=1; else quotient=0;
Note: dividend>==divisor iff dividend-divisor does not borrow
and not borrow iff carry. */
LSYM(big_divisor)
sub arg0,arg1,r0
MILLIRET
addc r0,r0,retreg
.exit
.procend
.end
#endif
#ifdef L_remI
/* ROUTINE: $$remI
DESCRIPTION:
. $$remI returns the remainder of the division of two signed 32-bit
. integers. The sign of the remainder is the same as the sign of
. the dividend.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = destroyed
. arg1 = destroyed
. ret1 = remainder
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions: DIVIDE BY ZERO
. Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
. Unwindable
. Does not create a stack frame
. Is usable for internal or external microcode
DISCUSSION:
. Calls other millicode routines via mrp: NONE
. Calls other millicode routines: NONE */
RDEFINE(tmp,r1)
RDEFINE(retreg,ret1)
SUBSPA_MILLI
ATTR_MILLI
.proc
.callinfo millicode
.entry
GSYM($$remI)
GSYM($$remoI)
.export $$remI,MILLICODE
.export $$remoI,MILLICODE
ldo -1(arg1),tmp /* is there at most one bit set ? */
and,<> arg1,tmp,r0 /* if not, don't use power of 2 */
addi,> 0,arg1,r0 /* if denominator > 0, use power */
/* of 2 */
b,n LREF(neg_denom)
LSYM(pow2)
comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */
and arg0,tmp,retreg /* get the result */
MILLIRETN
LSYM(neg_num)
subi 0,arg0,arg0 /* negate numerator */
and arg0,tmp,retreg /* get the result */
subi 0,retreg,retreg /* negate result */
MILLIRETN
LSYM(neg_denom)
addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */
/* of 2 */
b,n LREF(regular_seq)
sub r0,arg1,tmp /* make denominator positive */
comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */
ldo -1(tmp),retreg /* is there at most one bit set ? */
and,= tmp,retreg,r0 /* if not, go to regular_seq */
b,n LREF(regular_seq)
comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */
and arg0,retreg,retreg
MILLIRETN
LSYM(neg_num_2)
subi 0,arg0,tmp /* test against 0x80000000 */
and tmp,retreg,retreg
subi 0,retreg,retreg
MILLIRETN
LSYM(regular_seq)
addit,= 0,arg1,0 /* trap if div by zero */
add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
sub 0,retreg,retreg /* make it positive */
sub 0,arg1, tmp /* clear carry, */
/* negate the divisor */
ds 0, tmp,0 /* set V-bit to the comple- */
/* ment of the divisor sign */
or 0,0, tmp /* clear tmp */
add retreg,retreg,retreg /* shift msb bit into carry */
ds tmp,arg1, tmp /* 1st divide step, if no carry */
/* out, msb of quotient = 0 */
addc retreg,retreg,retreg /* shift retreg with/into carry */
LSYM(t1)
ds tmp,arg1, tmp /* 2nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 3rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 4th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 5th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 6th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 7th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 8th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 9th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 10th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 11th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 12th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 13th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 14th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 15th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 16th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 17th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 18th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 19th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 20th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 21st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 22nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 23rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 24th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 25th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 26th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 27th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 28th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 29th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 30th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 31st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 32nd divide step, */
addc retreg,retreg,retreg /* shift last bit into retreg */
movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */
add,< arg1,0,0 /* if arg1 > 0, add arg1 */
add,tr tmp,arg1,retreg /* for correcting remainder tmp */
sub tmp,arg1,retreg /* else add absolute value arg1 */
LSYM(finish)
add,>= arg0,0,0 /* set sign of remainder */
sub 0,retreg,retreg /* to sign of dividend */
MILLIRET
nop
.exit
.procend
#ifdef milliext
.origin 0x00000200
#endif
.end
#endif
#ifdef L_remU
/* ROUTINE: $$remU
. Single precision divide for remainder with unsigned binary integers.
.
. The remainder must be dividend-(dividend/divisor)*divisor.
. Divide by zero is trapped.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = remainder
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions: DIVIDE BY ZERO
. Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Does not create a stack frame.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Calls other millicode routines using mrp: NONE
. Calls other millicode routines: NONE */
RDEFINE(temp,r1)
RDEFINE(rmndr,ret1) /* r29 */
SUBSPA_MILLI
ATTR_MILLI
.export $$remU,millicode
.proc
.callinfo millicode
.entry
GSYM($$remU)
ldo -1(arg1),temp /* is there at most one bit set ? */
and,= arg1,temp,r0 /* if not, don't use power of 2 */
b LREF(regular_seq)
addit,= 0,arg1,r0 /* trap on div by zero */
and arg0,temp,rmndr /* get the result for power of 2 */
MILLIRETN
LSYM(regular_seq)
comib,>=,n 0,arg1,LREF(special_case)
subi 0,arg1,rmndr /* clear carry, negate the divisor */
ds r0,rmndr,r0 /* set V-bit to 1 */
add arg0,arg0,temp /* shift msb bit into carry */
ds r0,arg1,rmndr /* 1st divide step, if no carry */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 2nd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 3rd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 4th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 5th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 6th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 7th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 8th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 9th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 10th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 11th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 12th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 13th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 14th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 15th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 16th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 17th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 18th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 19th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 20th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 21st divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 22nd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 23rd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 24th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 25th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 26th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 27th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 28th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 29th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 30th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 31st divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 32nd divide step, */
comiclr,<= 0,rmndr,r0
add rmndr,arg1,rmndr /* correction */
MILLIRETN
nop
/* Putting >= on the last DS and deleting COMICLR does not work! */
LSYM(special_case)
sub,>>= arg0,arg1,rmndr
copy arg0,rmndr
MILLIRETN
nop
.exit
.procend
.end
#endif
#ifdef L_div_const
/* ROUTINE: $$divI_2
. $$divI_3 $$divU_3
. $$divI_4
. $$divI_5 $$divU_5
. $$divI_6 $$divU_6
. $$divI_7 $$divU_7
. $$divI_8
. $$divI_9 $$divU_9
. $$divI_10 $$divU_10
.
. $$divI_12 $$divU_12
.
. $$divI_14 $$divU_14
. $$divI_15 $$divU_15
. $$divI_16
. $$divI_17 $$divU_17
.
. Divide by selected constants for single precision binary integers.
INPUT REGISTERS:
. arg0 == dividend
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = quotient
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions: NONE
. Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Does not create a stack frame.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Calls other millicode routines using mrp: NONE
. Calls other millicode routines: NONE */
/* TRUNCATED DIVISION BY SMALL INTEGERS
We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
(with y fixed).
Let a = floor(z/y), for some choice of z. Note that z will be
chosen so that division by z is cheap.
Let r be the remainder(z/y). In other words, r = z - ay.
Now, our method is to choose a value for b such that
q'(x) = floor((ax+b)/z)
is equal to q(x) over as large a range of x as possible. If the
two are equal over a sufficiently large range, and if it is easy to
form the product (ax), and it is easy to divide by z, then we can
perform the division much faster than the general division algorithm.
So, we want the following to be true:
. For x in the following range:
.
. ky <= x < (k+1)y
.
. implies that
.
. k <= (ax+b)/z < (k+1)
We want to determine b such that this is true for all k in the
range {0..K} for some maximum K.
Since (ax+b) is an increasing function of x, we can take each
bound separately to determine the "best" value for b.
(ax+b)/z < (k+1) implies
(a((k+1)y-1)+b < (k+1)z implies
b < a + (k+1)(z-ay) implies
b < a + (k+1)r
This needs to be true for all k in the range {0..K}. In
particular, it is true for k = 0 and this leads to a maximum
acceptable value for b.
b < a+r or b <= a+r-1
Taking the other bound, we have
k <= (ax+b)/z implies
k <= (aky+b)/z implies
k(z-ay) <= b implies
kr <= b
Clearly, the largest range for k will be achieved by maximizing b,
when r is not zero. When r is zero, then the simplest choice for b
is 0. When r is not 0, set
. b = a+r-1
Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
for all x in the range:
. 0 <= x < (K+1)y
We need to determine what K is. Of our two bounds,
. b < a+(k+1)r is satisfied for all k >= 0, by construction.
The other bound is
. kr <= b
This is always true if r = 0. If r is not 0 (the usual case), then
K = floor((a+r-1)/r), is the maximum value for k.
Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
answer for q(x) = floor(x/y) when x is in the range
(0,(K+1)y-1) K = floor((a+r-1)/r)
To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
the formula for q'(x) yields the correct value of q(x) for all x
representable by a single word in HPPA.
We are also constrained in that computing the product (ax), adding
b, and dividing by z must all be done quickly, otherwise we will be
better off going through the general algorithm using the DS
instruction, which uses approximately 70 cycles.
For each y, there is a choice of z which satisfies the constraints
for (K+1)y >= 2**32. We may not, however, be able to satisfy the
timing constraints for arbitrary y. It seems that z being equal to
a power of 2 or a power of 2 minus 1 is as good as we can do, since
it minimizes the time to do division by z. We want the choice of z
to also result in a value for (a) that minimizes the computation of
the product (ax). This is best achieved if (a) has a regular bit
pattern (so the multiplication can be done with shifts and adds).
The value of (a) also needs to be less than 2**32 so the product is
always guaranteed to fit in 2 words.
In actual practice, the following should be done:
1) For negative x, you should take the absolute value and remember
. the fact so that the result can be negated. This obviously does
. not apply in the unsigned case.
2) For even y, you should factor out the power of 2 that divides y
. and divide x by it. You can then proceed by dividing by the
. odd factor of y.
Here is a table of some odd values of y, and corresponding choices
for z which are "good".
y z r a (hex) max x (hex)
3 2**32 1 55555555 100000001
5 2**32 1 33333333 100000003
7 2**24-1 0 249249 (infinite)
9 2**24-1 0 1c71c7 (infinite)
11 2**20-1 0 1745d (infinite)
13 2**24-1 0 13b13b (infinite)
15 2**32 1 11111111 10000000d
17 2**32 1 f0f0f0f 10000000f
If r is 1, then b = a+r-1 = a. This simplifies the computation
of (ax+b), since you can compute (x+1)(a) instead. If r is 0,
then b = 0 is ok to use which simplifies (ax+b).
The bit patterns for 55555555, 33333333, and 11111111 are obviously
very regular. The bit patterns for the other values of a above are:
y (hex) (binary)
7 249249 001001001001001001001001 << regular >>
9 1c71c7 000111000111000111000111 << regular >>
11 1745d 000000010111010001011101 << irregular >>
13 13b13b 000100111011000100111011 << irregular >>
The bit patterns for (a) corresponding to (y) of 11 and 13 may be
too irregular to warrant using this method.
When z is a power of 2 minus 1, then the division by z is slightly
more complicated, involving an iterative solution.
The code presented here solves division by 1 through 17, except for
11 and 13. There are algorithms for both signed and unsigned
quantities given.
TIMINGS (cycles)
divisor positive negative unsigned
. 1 2 2 2
. 2 4 4 2
. 3 19 21 19
. 4 4 4 2
. 5 18 22 19
. 6 19 22 19
. 8 4 4 2
. 10 18 19 17
. 12 18 20 18
. 15 16 18 16
. 16 4 4 2
. 17 16 18 16
Now, the algorithm for 7, 9, and 14 is an iterative one. That is,
a loop body is executed until the tentative quotient is 0. The
number of times the loop body is executed varies depending on the
dividend, but is never more than two times. If the dividend is
less than the divisor, then the loop body is not executed at all.
Each iteration adds 4 cycles to the timings.
divisor positive negative unsigned
. 7 19+4n 20+4n 20+4n n = number of iterations
. 9 21+4n 22+4n 21+4n
. 14 21+4n 22+4n 20+4n
To give an idea of how the number of iterations varies, here is a
table of dividend versus number of iterations when dividing by 7.
smallest largest required
dividend dividend iterations
. 0 6 0
. 7 0x6ffffff 1
0x1000006 0xffffffff 2
There is some overlap in the range of numbers requiring 1 and 2
iterations. */
RDEFINE(t2,r1)
RDEFINE(x2,arg0) /* r26 */
RDEFINE(t1,arg1) /* r25 */
RDEFINE(x1,ret1) /* r29 */
SUBSPA_MILLI_DIV
ATTR_MILLI
.proc
.callinfo millicode
.entry
/* NONE of these routines require a stack frame
ALL of these routines are unwindable from millicode */
GSYM($$divide_by_constant)
.export $$divide_by_constant,millicode
/* Provides a "nice" label for the code covered by the unwind descriptor
for things like gprof. */
/* DIVISION BY 2 (shift by 1) */
GSYM($$divI_2)
.export $$divI_2,millicode
comclr,>= arg0,0,0
addi 1,arg0,arg0
MILLIRET
extrs arg0,30,31,ret1
/* DIVISION BY 4 (shift by 2) */
GSYM($$divI_4)
.export $$divI_4,millicode
comclr,>= arg0,0,0
addi 3,arg0,arg0
MILLIRET
extrs arg0,29,30,ret1
/* DIVISION BY 8 (shift by 3) */
GSYM($$divI_8)
.export $$divI_8,millicode
comclr,>= arg0,0,0
addi 7,arg0,arg0
MILLIRET
extrs arg0,28,29,ret1
/* DIVISION BY 16 (shift by 4) */
GSYM($$divI_16)
.export $$divI_16,millicode
comclr,>= arg0,0,0
addi 15,arg0,arg0
MILLIRET
extrs arg0,27,28,ret1
/****************************************************************************
*
* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
*
* includes 3,5,15,17 and also 6,10,12
*
****************************************************************************/
/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
GSYM($$divI_3)
.export $$divI_3,millicode
comb,<,N x2,0,LREF(neg3)
addi 1,x2,x2 /* this cannot overflow */
extru x2,1,2,x1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(pos)
addc x1,0,x1
LSYM(neg3)
subi 1,x2,x2 /* this cannot overflow */
extru x2,1,2,x1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(neg)
addc x1,0,x1
GSYM($$divU_3)
.export $$divU_3,millicode
addi 1,x2,x2 /* this CAN overflow */
addc 0,0,x1
shd x1,x2,30,t1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(pos)
addc x1,t1,x1
/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
GSYM($$divI_5)
.export $$divI_5,millicode
comb,<,N x2,0,LREF(neg5)
addi 3,x2,t1 /* this cannot overflow */
sh1add x2,t1,x2 /* multiply by 3 to get started */
b LREF(pos)
addc 0,0,x1
LSYM(neg5)
sub 0,x2,x2 /* negate x2 */
addi 1,x2,x2 /* this cannot overflow */
shd 0,x2,31,x1 /* get top bit (can be 1) */
sh1add x2,x2,x2 /* multiply by 3 to get started */
b LREF(neg)
addc x1,0,x1
GSYM($$divU_5)
.export $$divU_5,millicode
addi 1,x2,x2 /* this CAN overflow */
addc 0,0,x1
shd x1,x2,31,t1 /* multiply by 3 to get started */
sh1add x2,x2,x2
b LREF(pos)
addc t1,x1,x1
/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */
GSYM($$divI_6)
.export $$divI_6,millicode
comb,<,N x2,0,LREF(neg6)
extru x2,30,31,x2 /* divide by 2 */
addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */
sh2add x2,t1,x2 /* multiply by 5 to get started */
b LREF(pos)
addc 0,0,x1
LSYM(neg6)
subi 2,x2,x2 /* negate, divide by 2, and add 1 */
/* negation and adding 1 are done */
/* at the same time by the SUBI */
extru x2,30,31,x2
shd 0,x2,30,x1
sh2add x2,x2,x2 /* multiply by 5 to get started */
b LREF(neg)
addc x1,0,x1
GSYM($$divU_6)
.export $$divU_6,millicode
extru x2,30,31,x2 /* divide by 2 */
addi 1,x2,x2 /* cannot carry */
shd 0,x2,30,x1 /* multiply by 5 to get started */
sh2add x2,x2,x2
b LREF(pos)
addc x1,0,x1
/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
GSYM($$divU_10)
.export $$divU_10,millicode
extru x2,30,31,x2 /* divide by 2 */
addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */
sh1add x2,t1,x2 /* multiply by 3 to get started */
addc 0,0,x1
LSYM(pos)
shd x1,x2,28,t1 /* multiply by 0x11 */
shd x2,0,28,t2
add x2,t2,x2
addc x1,t1,x1
LSYM(pos_for_17)
shd x1,x2,24,t1 /* multiply by 0x101 */
shd x2,0,24,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,16,t1 /* multiply by 0x10001 */
shd x2,0,16,t2
add x2,t2,x2
MILLIRET
addc x1,t1,x1
GSYM($$divI_10)
.export $$divI_10,millicode
comb,< x2,0,LREF(neg10)
copy 0,x1
extru x2,30,31,x2 /* divide by 2 */
addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */
sh1add x2,x2,x2 /* multiply by 3 to get started */
LSYM(neg10)
subi 2,x2,x2 /* negate, divide by 2, and add 1 */
/* negation and adding 1 are done */
/* at the same time by the SUBI */
extru x2,30,31,x2
sh1add x2,x2,x2 /* multiply by 3 to get started */
LSYM(neg)
shd x1,x2,28,t1 /* multiply by 0x11 */
shd x2,0,28,t2
add x2,t2,x2
addc x1,t1,x1
LSYM(neg_for_17)
shd x1,x2,24,t1 /* multiply by 0x101 */
shd x2,0,24,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,16,t1 /* multiply by 0x10001 */
shd x2,0,16,t2
add x2,t2,x2
addc x1,t1,x1
MILLIRET
sub 0,x1,x1
/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
GSYM($$divI_12)
.export $$divI_12,millicode
comb,< x2,0,LREF(neg12)
copy 0,x1
extru x2,29,30,x2 /* divide by 4 */
addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */
sh2add x2,x2,x2 /* multiply by 5 to get started */
LSYM(neg12)
subi 4,x2,x2 /* negate, divide by 4, and add 1 */
/* negation and adding 1 are done */
/* at the same time by the SUBI */
extru x2,29,30,x2
b LREF(neg)
sh2add x2,x2,x2 /* multiply by 5 to get started */
GSYM($$divU_12)
.export $$divU_12,millicode
extru x2,29,30,x2 /* divide by 4 */
addi 5,x2,t1 /* cannot carry */
sh2add x2,t1,x2 /* multiply by 5 to get started */
b LREF(pos)
addc 0,0,x1
/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
GSYM($$divI_15)
.export $$divI_15,millicode
comb,< x2,0,LREF(neg15)
copy 0,x1
addib,tr 1,x2,LREF(pos)+4
shd x1,x2,28,t1
LSYM(neg15)
b LREF(neg)
subi 1,x2,x2
GSYM($$divU_15)
.export $$divU_15,millicode
addi 1,x2,x2 /* this CAN overflow */
b LREF(pos)
addc 0,0,x1
/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */
GSYM($$divI_17)
.export $$divI_17,millicode
comb,<,n x2,0,LREF(neg17)
addi 1,x2,x2 /* this cannot overflow */
shd 0,x2,28,t1 /* multiply by 0xf to get started */
shd x2,0,28,t2
sub t2,x2,x2
b LREF(pos_for_17)
subb t1,0,x1
LSYM(neg17)
subi 1,x2,x2 /* this cannot overflow */
shd 0,x2,28,t1 /* multiply by 0xf to get started */
shd x2,0,28,t2
sub t2,x2,x2
b LREF(neg_for_17)
subb t1,0,x1
GSYM($$divU_17)
.export $$divU_17,millicode
addi 1,x2,x2 /* this CAN overflow */
addc 0,0,x1
shd x1,x2,28,t1 /* multiply by 0xf to get started */
LSYM(u17)
shd x2,0,28,t2
sub t2,x2,x2
b LREF(pos_for_17)
subb t1,x1,x1
/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
includes 7,9 and also 14
z = 2**24-1
r = z mod x = 0
so choose b = 0
Also, in order to divide by z = 2**24-1, we approximate by dividing
by (z+1) = 2**24 (which is easy), and then correcting.
(ax) = (z+1)q' + r
. = zq' + (q'+r)
So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
Then the true remainder of (ax)/z is (q'+r). Repeat the process
with this new remainder, adding the tentative quotients together,
until a tentative quotient is 0 (and then we are done). There is
one last correction to be done. It is possible that (q'+r) = z.
If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But,
in fact, we need to add 1 more to the quotient. Now, it turns
out that this happens if and only if the original value x is
an exact multiple of y. So, to avoid a three instruction test at
the end, instead use 1 instruction to add 1 to x at the beginning. */
/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
GSYM($$divI_7)
.export $$divI_7,millicode
comb,<,n x2,0,LREF(neg7)
LSYM(7)
addi 1,x2,x2 /* cannot overflow */
shd 0,x2,29,x1
sh3add x2,x2,x2
addc x1,0,x1
LSYM(pos7)
shd x1,x2,26,t1
shd x2,0,26,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,20,t1
shd x2,0,20,t2
add x2,t2,x2
addc x1,t1,t1
/* computed <t1,x2>. Now divide it by (2**24 - 1) */
copy 0,x1
shd,= t1,x2,24,t1 /* tentative quotient */
LSYM(1)
addb,tr t1,x1,LREF(2) /* add to previous quotient */
extru x2,31,24,x2 /* new remainder (unadjusted) */
MILLIRETN
LSYM(2)
addb,tr t1,x2,LREF(1) /* adjust remainder */
extru,= x2,7,8,t1 /* new quotient */
LSYM(neg7)
subi 1,x2,x2 /* negate x2 and add 1 */
LSYM(8)
shd 0,x2,29,x1
sh3add x2,x2,x2
addc x1,0,x1
LSYM(neg7_shift)
shd x1,x2,26,t1
shd x2,0,26,t2
add x2,t2,x2
addc x1,t1,x1
shd x1,x2,20,t1
shd x2,0,20,t2
add x2,t2,x2
addc x1,t1,t1
/* computed <t1,x2>. Now divide it by (2**24 - 1) */
copy 0,x1
shd,= t1,x2,24,t1 /* tentative quotient */
LSYM(3)
addb,tr t1,x1,LREF(4) /* add to previous quotient */
extru x2,31,24,x2 /* new remainder (unadjusted) */
MILLIRET
sub 0,x1,x1 /* negate result */
LSYM(4)
addb,tr t1,x2,LREF(3) /* adjust remainder */
extru,= x2,7,8,t1 /* new quotient */
GSYM($$divU_7)
.export $$divU_7,millicode
addi 1,x2,x2 /* can carry */
addc 0,0,x1
shd x1,x2,29,t1
sh3add x2,x2,x2
b LREF(pos7)
addc t1,x1,x1
/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
GSYM($$divI_9)
.export $$divI_9,millicode
comb,<,n x2,0,LREF(neg9)
addi 1,x2,x2 /* cannot overflow */
shd 0,x2,29,t1
shd x2,0,29,t2
sub t2,x2,x2
b LREF(pos7)
subb t1,0,x1
LSYM(neg9)
subi 1,x2,x2 /* negate and add 1 */
shd 0,x2,29,t1
shd x2,0,29,t2
sub t2,x2,x2
b LREF(neg7_shift)
subb t1,0,x1
GSYM($$divU_9)
.export $$divU_9,millicode
addi 1,x2,x2 /* can carry */
addc 0,0,x1
shd x1,x2,29,t1
shd x2,0,29,t2
sub t2,x2,x2
b LREF(pos7)
subb t1,x1,x1
/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
GSYM($$divI_14)
.export $$divI_14,millicode
comb,<,n x2,0,LREF(neg14)
GSYM($$divU_14)
.export $$divU_14,millicode
b LREF(7) /* go to 7 case */
extru x2,30,31,x2 /* divide by 2 */
LSYM(neg14)
subi 2,x2,x2 /* negate (and add 2) */
b LREF(8)
extru x2,30,31,x2 /* divide by 2 */
.exit
.procend
.end
#endif
#ifdef L_mulI
/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
/******************************************************************************
This routine is used on PA2.0 processors when gcc -mno-fpregs is used
ROUTINE: $$mulI
DESCRIPTION:
$$mulI multiplies two single word integers, giving a single
word result.
INPUT REGISTERS:
arg0 = Operand 1
arg1 = Operand 2
r31 == return pc
sr0 == return space when called externally
OUTPUT REGISTERS:
arg0 = undefined
arg1 = undefined
ret1 = result
OTHER REGISTERS AFFECTED:
r1 = undefined
SIDE EFFECTS:
Causes a trap under the following conditions: NONE
Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
Unwindable
Does not create a stack frame
Is usable for internal or external microcode
DISCUSSION:
Calls other millicode routines via mrp: NONE
Calls other millicode routines: NONE
***************************************************************************/
#define a0 %arg0
#define a1 %arg1
#define t0 %r1
#define r %ret1
#define a0__128a0 zdep a0,24,25,a0
#define a0__256a0 zdep a0,23,24,a0
#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0)
#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1)
#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2)
#define b_n_ret_t0 b,n LREF(ret_t0)
#define b_e_shift b LREF(e_shift)
#define b_e_t0ma0 b LREF(e_t0ma0)
#define b_e_t0 b LREF(e_t0)
#define b_e_t0a0 b LREF(e_t0a0)
#define b_e_t02a0 b LREF(e_t02a0)
#define b_e_t04a0 b LREF(e_t04a0)
#define b_e_2t0 b LREF(e_2t0)
#define b_e_2t0a0 b LREF(e_2t0a0)
#define b_e_2t04a0 b LREF(e2t04a0)
#define b_e_3t0 b LREF(e_3t0)
#define b_e_4t0 b LREF(e_4t0)
#define b_e_4t0a0 b LREF(e_4t0a0)
#define b_e_4t08a0 b LREF(e4t08a0)
#define b_e_5t0 b LREF(e_5t0)
#define b_e_8t0 b LREF(e_8t0)
#define b_e_8t0a0 b LREF(e_8t0a0)
#define r__r_a0 add r,a0,r
#define r__r_2a0 sh1add a0,r,r
#define r__r_4a0 sh2add a0,r,r
#define r__r_8a0 sh3add a0,r,r
#define r__r_t0 add r,t0,r
#define r__r_2t0 sh1add t0,r,r
#define r__r_4t0 sh2add t0,r,r
#define r__r_8t0 sh3add t0,r,r
#define t0__3a0 sh1add a0,a0,t0
#define t0__4a0 sh2add a0,0,t0
#define t0__5a0 sh2add a0,a0,t0
#define t0__8a0 sh3add a0,0,t0
#define t0__9a0 sh3add a0,a0,t0
#define t0__16a0 zdep a0,27,28,t0
#define t0__32a0 zdep a0,26,27,t0
#define t0__64a0 zdep a0,25,26,t0
#define t0__128a0 zdep a0,24,25,t0
#define t0__t0ma0 sub t0,a0,t0
#define t0__t0_a0 add t0,a0,t0
#define t0__t0_2a0 sh1add a0,t0,t0
#define t0__t0_4a0 sh2add a0,t0,t0
#define t0__t0_8a0 sh3add a0,t0,t0
#define t0__2t0_a0 sh1add t0,a0,t0
#define t0__3t0 sh1add t0,t0,t0
#define t0__4t0 sh2add t0,0,t0
#define t0__4t0_a0 sh2add t0,a0,t0
#define t0__5t0 sh2add t0,t0,t0
#define t0__8t0 sh3add t0,0,t0
#define t0__8t0_a0 sh3add t0,a0,t0
#define t0__9t0 sh3add t0,t0,t0
#define t0__16t0 zdep t0,27,28,t0
#define t0__32t0 zdep t0,26,27,t0
#define t0__256a0 zdep a0,23,24,t0
SUBSPA_MILLI
ATTR_MILLI
.align 16
.proc
.callinfo millicode
.export $$mulI,millicode
GSYM($$mulI)
combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */
copy 0,r /* zero out the result */
xor a0,a1,a0 /* swap a0 & a1 using the */
xor a0,a1,a1 /* old xor trick */
xor a0,a1,a0
LSYM(l4)
combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */
zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
sub,> 0,a1,t0 /* otherwise negate both and */
combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */
sub 0,a0,a1
movb,tr,n t0,a0,LREF(l2) /* 10th inst. */
LSYM(l0) r__r_t0 /* add in this partial product */
LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */
LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
LSYM(l3) blr t0,0 /* case on these 8 bits ****** */
extru a1,23,24,a1 /* a1 >>= 8 ****************** */
/*16 insts before this. */
/* a0 <<= 8 ************************** */
LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop
LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop
LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop
LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0
LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop
LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0
LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0
LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop
LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0
LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0
LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0
LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0
LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0
LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0
LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0
LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0
LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0
LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0
LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0
LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0
LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0
LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0
LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0
LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0
LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0
LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0
LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0
LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0
LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0
LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0
LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0
LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0
LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0
LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0
LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0
LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0
LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0
LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0
LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0
LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0
LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0
LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0
LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0
LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0
LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0
LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0
LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0
LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0
LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0
LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0
LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0
LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0
LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0
LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0
LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0
LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0
LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0
LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0
LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0
LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0
LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0
LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0
LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0
LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0
LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0
LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0
LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0
LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0
LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0
LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0
LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0
LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0
LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0
LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0
LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0
LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0
LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0
LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0
LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0
LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0
LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0
LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0
LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0
LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0
LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0
LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0
LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0
LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0
LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0
LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0
LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0
LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0
LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0
LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0
LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0
LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0
LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0
LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0
LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0
LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0
LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0
LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0
LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0
LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0
LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0
LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
/*1040 insts before this. */
LSYM(ret_t0) MILLIRET
LSYM(e_t0) r__r_t0
LSYM(e_shift) a1_ne_0_b_l2
a0__256a0 /* a0 <<= 8 *********** */
MILLIRETN
LSYM(e_t0ma0) a1_ne_0_b_l0
t0__t0ma0
MILLIRET
r__r_t0
LSYM(e_t0a0) a1_ne_0_b_l0
t0__t0_a0
MILLIRET
r__r_t0
LSYM(e_t02a0) a1_ne_0_b_l0
t0__t0_2a0
MILLIRET
r__r_t0
LSYM(e_t04a0) a1_ne_0_b_l0
t0__t0_4a0
MILLIRET
r__r_t0
LSYM(e_2t0) a1_ne_0_b_l1
r__r_2t0
MILLIRETN
LSYM(e_2t0a0) a1_ne_0_b_l0
t0__2t0_a0
MILLIRET
r__r_t0
LSYM(e2t04a0) t0__t0_2a0
a1_ne_0_b_l1
r__r_2t0
MILLIRETN
LSYM(e_3t0) a1_ne_0_b_l0
t0__3t0
MILLIRET
r__r_t0
LSYM(e_4t0) a1_ne_0_b_l1
r__r_4t0
MILLIRETN
LSYM(e_4t0a0) a1_ne_0_b_l0
t0__4t0_a0
MILLIRET
r__r_t0
LSYM(e4t08a0) t0__t0_2a0
a1_ne_0_b_l1
r__r_4t0
MILLIRETN
LSYM(e_5t0) a1_ne_0_b_l0
t0__5t0
MILLIRET
r__r_t0
LSYM(e_8t0) a1_ne_0_b_l1
r__r_8t0
MILLIRETN
LSYM(e_8t0a0) a1_ne_0_b_l0
t0__8t0_a0
MILLIRET
r__r_t0
.procend
.end
#endif
arch/parisc/lib/milli/milli.h 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#ifndef _PA_MILLI_H_
#define _PA_MILLI_H_
#define L_dyncall
#define L_divI
#define L_divU
#define L_remI
#define L_remU
#define L_div_const
#define L_mulI
#ifdef CONFIG_64BIT
.level 2.0w
#endif
/* Hardware General Registers. */
r0: .reg %r0
r1: .reg %r1
r2: .reg %r2
r3: .reg %r3
r4: .reg %r4
r5: .reg %r5
r6: .reg %r6
r7: .reg %r7
r8: .reg %r8
r9: .reg %r9
r10: .reg %r10
r11: .reg %r11
r12: .reg %r12
r13: .reg %r13
r14: .reg %r14
r15: .reg %r15
r16: .reg %r16
r17: .reg %r17
r18: .reg %r18
r19: .reg %r19
r20: .reg %r20
r21: .reg %r21
r22: .reg %r22
r23: .reg %r23
r24: .reg %r24
r25: .reg %r25
r26: .reg %r26
r27: .reg %r27
r28: .reg %r28
r29: .reg %r29
r30: .reg %r30
r31: .reg %r31
/* Hardware Space Registers. */
sr0: .reg %sr0
sr1: .reg %sr1
sr2: .reg %sr2
sr3: .reg %sr3
sr4: .reg %sr4
sr5: .reg %sr5
sr6: .reg %sr6
sr7: .reg %sr7
/* Hardware Floating Point Registers. */
fr0: .reg %fr0
fr1: .reg %fr1
fr2: .reg %fr2
fr3: .reg %fr3
fr4: .reg %fr4
fr5: .reg %fr5
fr6: .reg %fr6
fr7: .reg %fr7
fr8: .reg %fr8
fr9: .reg %fr9
fr10: .reg %fr10
fr11: .reg %fr11
fr12: .reg %fr12
fr13: .reg %fr13
fr14: .reg %fr14
fr15: .reg %fr15
/* Hardware Control Registers. */
cr11: .reg %cr11
sar: .reg %cr11 /* Shift Amount Register */
/* Software Architecture General Registers. */
rp: .reg r2 /* return pointer */
#ifdef CONFIG_64BIT
mrp: .reg r2 /* millicode return pointer */
#else
mrp: .reg r31 /* millicode return pointer */
#endif
ret0: .reg r28 /* return value */
ret1: .reg r29 /* return value (high part of double) */
sp: .reg r30 /* stack pointer */
dp: .reg r27 /* data pointer */
arg0: .reg r26 /* argument */
arg1: .reg r25 /* argument or high part of double argument */
arg2: .reg r24 /* argument */
arg3: .reg r23 /* argument or high part of double argument */
/* Software Architecture Space Registers. */
/* sr0 ; return link from BLE */
sret: .reg sr1 /* return value */
sarg: .reg sr1 /* argument */
/* sr4 ; PC SPACE tracker */
/* sr5 ; process private data */
/* Frame Offsets (millicode convention!) Used when calling other
millicode routines. Stack unwinding is dependent upon these
definitions. */
r31_slot: .equ -20 /* "current RP" slot */
sr0_slot: .equ -16 /* "static link" slot */
#if defined(CONFIG_64BIT)
mrp_slot: .equ -16 /* "current RP" slot */
psp_slot: .equ -8 /* "previous SP" slot */
#else
mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */
#endif
#define DEFINE(name,value)name: .EQU value
#define RDEFINE(name,value)name: .REG value
#ifdef milliext
#define MILLI_BE(lbl) BE lbl(sr7,r0)
#define MILLI_BEN(lbl) BE,n lbl(sr7,r0)
#define MILLI_BLE(lbl) BLE lbl(sr7,r0)
#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0)
#define MILLIRETN BE,n 0(sr0,mrp)
#define MILLIRET BE 0(sr0,mrp)
#define MILLI_RETN BE,n 0(sr0,mrp)
#define MILLI_RET BE 0(sr0,mrp)
#else
#define MILLI_BE(lbl) B lbl
#define MILLI_BEN(lbl) B,n lbl
#define MILLI_BLE(lbl) BL lbl,mrp
#define MILLI_BLEN(lbl) BL,n lbl,mrp
#define MILLIRETN BV,n 0(mrp)
#define MILLIRET BV 0(mrp)
#define MILLI_RETN BV,n 0(mrp)
#define MILLI_RET BV 0(mrp)
#endif
#define CAT(a,b) a##b
#define SUBSPA_MILLI .section .text
#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
#define ATTR_MILLI
#define SUBSPA_DATA .section .data
#define ATTR_DATA
#define GLOBAL $global$
#define GSYM(sym) !sym:
#define LSYM(sym) !CAT(.L,sym:)
#define LREF(sym) CAT(.L,sym)
#endif /*_PA_MILLI_H_*/
arch/parisc/lib/milli/mulI.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#include "milli.h"
#ifdef L_mulI
/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
/******************************************************************************
This routine is used on PA2.0 processors when gcc -mno-fpregs is used
ROUTINE: $$mulI
DESCRIPTION:
$$mulI multiplies two single word integers, giving a single
word result.
INPUT REGISTERS:
arg0 = Operand 1
arg1 = Operand 2
r31 == return pc
sr0 == return space when called externally
OUTPUT REGISTERS:
arg0 = undefined
arg1 = undefined
ret1 = result
OTHER REGISTERS AFFECTED:
r1 = undefined
SIDE EFFECTS:
Causes a trap under the following conditions: NONE
Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
Unwindable
Does not create a stack frame
Is usable for internal or external microcode
DISCUSSION:
Calls other millicode routines via mrp: NONE
Calls other millicode routines: NONE
***************************************************************************/
#define a0 %arg0
#define a1 %arg1
#define t0 %r1
#define r %ret1
#define a0__128a0 zdep a0,24,25,a0
#define a0__256a0 zdep a0,23,24,a0
#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0)
#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1)
#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2)
#define b_n_ret_t0 b,n LREF(ret_t0)
#define b_e_shift b LREF(e_shift)
#define b_e_t0ma0 b LREF(e_t0ma0)
#define b_e_t0 b LREF(e_t0)
#define b_e_t0a0 b LREF(e_t0a0)
#define b_e_t02a0 b LREF(e_t02a0)
#define b_e_t04a0 b LREF(e_t04a0)
#define b_e_2t0 b LREF(e_2t0)
#define b_e_2t0a0 b LREF(e_2t0a0)
#define b_e_2t04a0 b LREF(e2t04a0)
#define b_e_3t0 b LREF(e_3t0)
#define b_e_4t0 b LREF(e_4t0)
#define b_e_4t0a0 b LREF(e_4t0a0)
#define b_e_4t08a0 b LREF(e4t08a0)
#define b_e_5t0 b LREF(e_5t0)
#define b_e_8t0 b LREF(e_8t0)
#define b_e_8t0a0 b LREF(e_8t0a0)
#define r__r_a0 add r,a0,r
#define r__r_2a0 sh1add a0,r,r
#define r__r_4a0 sh2add a0,r,r
#define r__r_8a0 sh3add a0,r,r
#define r__r_t0 add r,t0,r
#define r__r_2t0 sh1add t0,r,r
#define r__r_4t0 sh2add t0,r,r
#define r__r_8t0 sh3add t0,r,r
#define t0__3a0 sh1add a0,a0,t0
#define t0__4a0 sh2add a0,0,t0
#define t0__5a0 sh2add a0,a0,t0
#define t0__8a0 sh3add a0,0,t0
#define t0__9a0 sh3add a0,a0,t0
#define t0__16a0 zdep a0,27,28,t0
#define t0__32a0 zdep a0,26,27,t0
#define t0__64a0 zdep a0,25,26,t0
#define t0__128a0 zdep a0,24,25,t0
#define t0__t0ma0 sub t0,a0,t0
#define t0__t0_a0 add t0,a0,t0
#define t0__t0_2a0 sh1add a0,t0,t0
#define t0__t0_4a0 sh2add a0,t0,t0
#define t0__t0_8a0 sh3add a0,t0,t0
#define t0__2t0_a0 sh1add t0,a0,t0
#define t0__3t0 sh1add t0,t0,t0
#define t0__4t0 sh2add t0,0,t0
#define t0__4t0_a0 sh2add t0,a0,t0
#define t0__5t0 sh2add t0,t0,t0
#define t0__8t0 sh3add t0,0,t0
#define t0__8t0_a0 sh3add t0,a0,t0
#define t0__9t0 sh3add t0,t0,t0
#define t0__16t0 zdep t0,27,28,t0
#define t0__32t0 zdep t0,26,27,t0
#define t0__256a0 zdep a0,23,24,t0
SUBSPA_MILLI
ATTR_MILLI
.align 16
.proc
.callinfo millicode
.export $$mulI,millicode
GSYM($$mulI)
combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */
copy 0,r /* zero out the result */
xor a0,a1,a0 /* swap a0 & a1 using the */
xor a0,a1,a1 /* old xor trick */
xor a0,a1,a0
LSYM(l4)
combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */
zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
sub,> 0,a1,t0 /* otherwise negate both and */
combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */
sub 0,a0,a1
movb,tr,n t0,a0,LREF(l2) /* 10th inst. */
LSYM(l0) r__r_t0 /* add in this partial product */
LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */
LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */
LSYM(l3) blr t0,0 /* case on these 8 bits ****** */
extru a1,23,24,a1 /* a1 >>= 8 ****************** */
/*16 insts before this. */
/* a0 <<= 8 ************************** */
LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop
LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop
LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop
LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0
LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop
LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0
LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0
LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop
LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0
LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0
LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0
LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0
LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN
LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0
LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0
LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0
LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN
LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0
LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0
LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0
LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0
LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0
LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0
LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0
LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0
LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0
LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0
LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0
LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0
LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN
LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0
LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0
LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0
LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0
LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0
LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0
LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0
LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0
LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0
LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0
LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0
LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0
LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0
LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0
LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0
LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0
LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0
LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN
LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0
LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0
LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0
LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0
LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0
LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0
LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0
LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0
LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0
LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0
LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0
LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0
LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0
LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0
LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0
LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0
LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0
LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0
LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0
LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0
LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0
LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0
LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0
LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0
LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0
LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0
LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0
LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0
LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0
LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0
LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0
LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0
LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0
LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0
LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0
LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0
LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0
LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0
LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0
LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0
LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0
LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0
LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0
LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0
LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0
LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0
LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0
LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0
LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0
LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0
LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0
LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0
LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0
LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0
LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0
LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0
LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0
LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0
LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0
LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0
LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0
LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0
LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0
LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0
LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0
LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0
LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0
LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0
LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0
LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0
LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0
LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0
LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0
LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0
LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0
LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0
LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0
LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0
LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0
LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0
LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0
LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0
LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0
LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0
LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0
LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0
LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0
LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0
LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0
LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0
LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0
LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0
LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0
LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0
LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0
/*1040 insts before this. */
LSYM(ret_t0) MILLIRET
LSYM(e_t0) r__r_t0
LSYM(e_shift) a1_ne_0_b_l2
a0__256a0 /* a0 <<= 8 *********** */
MILLIRETN
LSYM(e_t0ma0) a1_ne_0_b_l0
t0__t0ma0
MILLIRET
r__r_t0
LSYM(e_t0a0) a1_ne_0_b_l0
t0__t0_a0
MILLIRET
r__r_t0
LSYM(e_t02a0) a1_ne_0_b_l0
t0__t0_2a0
MILLIRET
r__r_t0
LSYM(e_t04a0) a1_ne_0_b_l0
t0__t0_4a0
MILLIRET
r__r_t0
LSYM(e_2t0) a1_ne_0_b_l1
r__r_2t0
MILLIRETN
LSYM(e_2t0a0) a1_ne_0_b_l0
t0__2t0_a0
MILLIRET
r__r_t0
LSYM(e2t04a0) t0__t0_2a0
a1_ne_0_b_l1
r__r_2t0
MILLIRETN
LSYM(e_3t0) a1_ne_0_b_l0
t0__3t0
MILLIRET
r__r_t0
LSYM(e_4t0) a1_ne_0_b_l1
r__r_4t0
MILLIRETN
LSYM(e_4t0a0) a1_ne_0_b_l0
t0__4t0_a0
MILLIRET
r__r_t0
LSYM(e4t08a0) t0__t0_2a0
a1_ne_0_b_l1
r__r_4t0
MILLIRETN
LSYM(e_5t0) a1_ne_0_b_l0
t0__5t0
MILLIRET
r__r_t0
LSYM(e_8t0) a1_ne_0_b_l1
r__r_8t0
MILLIRETN
LSYM(e_8t0a0) a1_ne_0_b_l0
t0__8t0_a0
MILLIRET
r__r_t0
.procend
.end
#endif
arch/parisc/lib/milli/remI.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#include "milli.h"
#ifdef L_remI
/* ROUTINE: $$remI
DESCRIPTION:
. $$remI returns the remainder of the division of two signed 32-bit
. integers. The sign of the remainder is the same as the sign of
. the dividend.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = destroyed
. arg1 = destroyed
. ret1 = remainder
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions: DIVIDE BY ZERO
. Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
. Unwindable
. Does not create a stack frame
. Is usable for internal or external microcode
DISCUSSION:
. Calls other millicode routines via mrp: NONE
. Calls other millicode routines: NONE */
RDEFINE(tmp,r1)
RDEFINE(retreg,ret1)
SUBSPA_MILLI
ATTR_MILLI
.proc
.callinfo millicode
.entry
GSYM($$remI)
GSYM($$remoI)
.export $$remI,MILLICODE
.export $$remoI,MILLICODE
ldo -1(arg1),tmp /* is there at most one bit set ? */
and,<> arg1,tmp,r0 /* if not, don't use power of 2 */
addi,> 0,arg1,r0 /* if denominator > 0, use power */
/* of 2 */
b,n LREF(neg_denom)
LSYM(pow2)
comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */
and arg0,tmp,retreg /* get the result */
MILLIRETN
LSYM(neg_num)
subi 0,arg0,arg0 /* negate numerator */
and arg0,tmp,retreg /* get the result */
subi 0,retreg,retreg /* negate result */
MILLIRETN
LSYM(neg_denom)
addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */
/* of 2 */
b,n LREF(regular_seq)
sub r0,arg1,tmp /* make denominator positive */
comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */
ldo -1(tmp),retreg /* is there at most one bit set ? */
and,= tmp,retreg,r0 /* if not, go to regular_seq */
b,n LREF(regular_seq)
comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */
and arg0,retreg,retreg
MILLIRETN
LSYM(neg_num_2)
subi 0,arg0,tmp /* test against 0x80000000 */
and tmp,retreg,retreg
subi 0,retreg,retreg
MILLIRETN
LSYM(regular_seq)
addit,= 0,arg1,0 /* trap if div by zero */
add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */
sub 0,retreg,retreg /* make it positive */
sub 0,arg1, tmp /* clear carry, */
/* negate the divisor */
ds 0, tmp,0 /* set V-bit to the comple- */
/* ment of the divisor sign */
or 0,0, tmp /* clear tmp */
add retreg,retreg,retreg /* shift msb bit into carry */
ds tmp,arg1, tmp /* 1st divide step, if no carry */
/* out, msb of quotient = 0 */
addc retreg,retreg,retreg /* shift retreg with/into carry */
LSYM(t1)
ds tmp,arg1, tmp /* 2nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 3rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 4th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 5th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 6th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 7th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 8th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 9th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 10th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 11th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 12th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 13th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 14th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 15th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 16th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 17th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 18th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 19th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 20th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 21st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 22nd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 23rd divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 24th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 25th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 26th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 27th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 28th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 29th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 30th divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 31st divide step */
addc retreg,retreg,retreg /* shift retreg with/into carry */
ds tmp,arg1, tmp /* 32nd divide step, */
addc retreg,retreg,retreg /* shift last bit into retreg */
movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */
add,< arg1,0,0 /* if arg1 > 0, add arg1 */
add,tr tmp,arg1,retreg /* for correcting remainder tmp */
sub tmp,arg1,retreg /* else add absolute value arg1 */
LSYM(finish)
add,>= arg0,0,0 /* set sign of remainder */
sub 0,retreg,retreg /* to sign of dividend */
MILLIRET
nop
.exit
.procend
#ifdef milliext
.origin 0x00000200
#endif
.end
#endif
arch/parisc/lib/milli/remU.S 0 → 100644
View file @ cfa76f02
/* 32 and 64-bit millicode, original author Hewlett-Packard
adapted for gcc by Paul Bame <bame@debian.org>
and Alan Modra <alan@linuxcare.com.au>.
Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC and is released under the terms of
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
See the file COPYING in the top-level GCC source directory for a copy
of the license. */
#include "milli.h"
#ifdef L_remU
/* ROUTINE: $$remU
. Single precision divide for remainder with unsigned binary integers.
.
. The remainder must be dividend-(dividend/divisor)*divisor.
. Divide by zero is trapped.
INPUT REGISTERS:
. arg0 == dividend
. arg1 == divisor
. mrp == return pc
. sr0 == return space when called externally
OUTPUT REGISTERS:
. arg0 = undefined
. arg1 = undefined
. ret1 = remainder
OTHER REGISTERS AFFECTED:
. r1 = undefined
SIDE EFFECTS:
. Causes a trap under the following conditions: DIVIDE BY ZERO
. Changes memory at the following places: NONE
PERMISSIBLE CONTEXT:
. Unwindable.
. Does not create a stack frame.
. Suitable for internal or external millicode.
. Assumes the special millicode register conventions.
DISCUSSION:
. Calls other millicode routines using mrp: NONE
. Calls other millicode routines: NONE */
RDEFINE(temp,r1)
RDEFINE(rmndr,ret1) /* r29 */
SUBSPA_MILLI
ATTR_MILLI
.export $$remU,millicode
.proc
.callinfo millicode
.entry
GSYM($$remU)
ldo -1(arg1),temp /* is there at most one bit set ? */
and,= arg1,temp,r0 /* if not, don't use power of 2 */
b LREF(regular_seq)
addit,= 0,arg1,r0 /* trap on div by zero */
and arg0,temp,rmndr /* get the result for power of 2 */
MILLIRETN
LSYM(regular_seq)
comib,>=,n 0,arg1,LREF(special_case)
subi 0,arg1,rmndr /* clear carry, negate the divisor */
ds r0,rmndr,r0 /* set V-bit to 1 */
add arg0,arg0,temp /* shift msb bit into carry */
ds r0,arg1,rmndr /* 1st divide step, if no carry */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 2nd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 3rd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 4th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 5th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 6th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 7th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 8th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 9th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 10th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 11th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 12th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 13th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 14th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 15th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 16th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 17th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 18th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 19th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 20th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 21st divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 22nd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 23rd divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 24th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 25th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 26th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 27th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 28th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 29th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 30th divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 31st divide step */
addc temp,temp,temp /* shift temp with/into carry */
ds rmndr,arg1,rmndr /* 32nd divide step, */
comiclr,<= 0,rmndr,r0
add rmndr,arg1,rmndr /* correction */
MILLIRETN
nop
/* Putting >= on the last DS and deleting COMICLR does not work! */
LSYM(special_case)
sub,>>= arg0,arg1,rmndr
copy arg0,rmndr
MILLIRETN
nop
.exit
.procend
.end
#endif
arch/parisc/mm/init.c
View file @ cfa76f02
......@@ -607,7 +607,7 @@ void show_mem(void)
printk("Zone list for zone %d on node %d: ", j, i);
for (k = 0; zl->zones[k] != NULL; k++)
printk("[%ld/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
printk("[%d/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
printk("\n");
}
}
......
drivers/parisc/lba_pci.c
View file @ cfa76f02
......@@ -556,44 +556,6 @@ lba_bios_init(void)
#ifdef CONFIG_64BIT
/*
** Determine if a device is already configured.
** If so, reserve it resources.
**
** Read PCI cfg command register and see if I/O or MMIO is enabled.
** PAT has to enable the devices it's using.
**
** Note: resources are fixed up before we try to claim them.
*/
static void
lba_claim_dev_resources(struct pci_dev *dev)
{
u16 cmd;
int i, srch_flags;
(void) pci_read_config_word(dev, PCI_COMMAND, &cmd);
srch_flags = (cmd & PCI_COMMAND_IO) ? IORESOURCE_IO : 0;
if (cmd & PCI_COMMAND_MEMORY)
srch_flags |= IORESOURCE_MEM;
if (!srch_flags)
return;
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
if (dev->resource[i].flags & srch_flags) {
pci_claim_resource(dev, i);
DBG(" claimed %s %d [%lx,%lx]/%lx\n",
pci_name(dev), i,
dev->resource[i].start,
dev->resource[i].end,
dev->resource[i].flags
);
}
}
}
/*
* truncate_pat_collision: Deal with overlaps or outright collisions
* between PAT PDC reported ranges.
......@@ -653,7 +615,6 @@ truncate_pat_collision(struct resource *root, struct resource *new)
}
#else
#define lba_claim_dev_resources(dev) do { } while (0)
#define truncate_pat_collision(r,n) (0)
#endif
......@@ -684,8 +645,12 @@ lba_fixup_bus(struct pci_bus *bus)
** pci_alloc_primary_bus() mangles this.
*/
if (bus->self) {
int i;
/* PCI-PCI Bridge */
pci_read_bridge_bases(bus);
for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
pci_claim_resource(bus->self, i);
}
} else {
/* Host-PCI Bridge */
int err, i;
......@@ -803,6 +768,9 @@ lba_fixup_bus(struct pci_bus *bus)
DBG("lba_fixup_bus() WTF? 0x%lx [%lx/%lx] XXX",
res->flags, res->start, res->end);
}
if ((i != PCI_ROM_RESOURCE) ||
(res->flags & IORESOURCE_ROM_ENABLE))
pci_claim_resource(dev, i);
}
#ifdef FBB_SUPPORT
......@@ -814,11 +782,6 @@ lba_fixup_bus(struct pci_bus *bus)
bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK);
#endif
if (is_pdc_pat()) {
/* Claim resources for PDC's devices */
lba_claim_dev_resources(dev);
}
/*
** P2PB's have no IRQs. ignore them.
*/
......
drivers/parisc/pdc_stable.c
View file @ cfa76f02
......@@ -282,6 +282,7 @@ pdcspath_hwpath_write(struct pdcspath_entry *entry, const char *buf, size_t coun
unsigned short i;
char in[count+1], *temp;
struct device *dev;
int ret;
if (!entry || !buf || !count)
return -EINVAL;
......@@ -333,7 +334,9 @@ pdcspath_hwpath_write(struct pdcspath_entry *entry, const char *buf, size_t coun
/* Update the symlink to the real device */
sysfs_remove_link(&entry->kobj, "device");
sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
ret = sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
WARN_ON(ret);
write_unlock(&entry->rw_lock);
printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n",
......@@ -1003,8 +1006,10 @@ pdcs_register_pathentries(void)
entry->ready = 2;
/* Add a nice symlink to the real device */
if (entry->dev)
sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
if (entry->dev) {
err = sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
WARN_ON(err);
}
write_unlock(&entry->rw_lock);
}
......
drivers/parisc/sba_iommu.c
View file @ cfa76f02
......@@ -1909,8 +1909,8 @@ sba_driver_callback(struct parisc_device *dev)
global_ioc_cnt *= 2;
}
printk(KERN_INFO "%s found %s at 0x%lx\n",
MODULE_NAME, version, dev->hpa.start);
printk(KERN_INFO "%s found %s at 0x%llx\n",
MODULE_NAME, version, (unsigned long long)dev->hpa.start);
sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
if (!sba_dev) {
......
drivers/parisc/superio.c
View file @ cfa76f02
......@@ -155,6 +155,7 @@ superio_init(struct pci_dev *pcidev)
struct superio_device *sio = &sio_dev;
struct pci_dev *pdev = sio->lio_pdev;
u16 word;
int ret;
if (sio->suckyio_irq_enabled)
return;
......@@ -200,7 +201,8 @@ superio_init(struct pci_dev *pcidev)
pci_write_config_word (pdev, PCI_COMMAND, word);
pci_set_master (pdev);
pci_enable_device(pdev);
ret = pci_enable_device(pdev);
BUG_ON(ret < 0); /* not too much we can do about this... */
/*
* Next project is programming the onboard interrupt controllers.
......
include/asm-parisc/Kbuild
View file @ cfa76f02
include include/asm-generic/Kbuild.asm
unifdef-y += pdc.h
include/asm-parisc/io.h
View file @ cfa76f02
......@@ -138,7 +138,7 @@ extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsign
/* Most machines react poorly to I/O-space being cacheable... Instead let's
* define ioremap() in terms of ioremap_nocache().
*/
extern inline void __iomem * ioremap(unsigned long offset, unsigned long size)
static inline void __iomem * ioremap(unsigned long offset, unsigned long size)
{
return __ioremap(offset, size, _PAGE_NO_CACHE);
}
......
include/asm-parisc/page.h
View file @ cfa76f02
......@@ -3,6 +3,8 @@
#ifdef __KERNEL__
#include <linux/const.h>
#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
# define PAGE_SHIFT 12
#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
......@@ -12,7 +14,7 @@
#else
# error "unknown default kernel page size"
#endif
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
......
include/asm-parisc/pci.h
View file @ cfa76f02
......@@ -207,7 +207,7 @@ extern struct pci_bios_ops *pci_bios;
extern void pcibios_register_hba(struct pci_hba_data *);
extern void pcibios_set_master(struct pci_dev *);
#else
extern inline void pcibios_register_hba(struct pci_hba_data *x)
static inline void pcibios_register_hba(struct pci_hba_data *x)
{
}
#endif
......
include/asm-parisc/pdc.h
View file @ cfa76f02
#ifndef _PARISC_PDC_H
#define _PARISC_PDC_H
/*
* PDC return values ...
* All PDC calls return a subset of these errors.
......@@ -20,7 +19,6 @@
#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
#define PDC_NOT_NARROW -17 /* Narrow mode not supported */
/*
* PDC entry points...
*/
......@@ -50,6 +48,12 @@
#define PDC_MODEL_DISPEC 5 /* disable specific option */
#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
#define PDC_MODEL_IOPDIR_FDC (1 << 2)
#define PDC_MODEL_NVA_MASK (3 << 4)
#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
#define PDC_MODEL_NVA_SLOW (1 << 4)
#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
......@@ -91,7 +95,7 @@
#define PDC_TOD 9 /* time-of-day clock (TOD) */
#define PDC_TOD_READ 0 /* read TOD */
#define PDC_TOD_WRITE 1 /* write TOD */
#define PDC_TOD_ITIMER 2 /* calibrate Interval Timer (CR16) */
#define PDC_STABLE 10 /* stable storage (sprockets) */
#define PDC_STABLE_READ 0
......@@ -143,15 +147,6 @@
#define PDC_MEM_RET_PDT_FULL -11
#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
#ifndef __ASSEMBLY__
typedef struct {
unsigned long long baseAddr;
unsigned int pages;
unsigned int reserved;
} MemAddrTable_t;
#endif
#define PDC_PSW 21 /* Get/Set default System Mask */
#define PDC_PSW_MASK 0 /* Return mask */
#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
......@@ -274,6 +269,43 @@ typedef struct {
#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
/* cl_class
* page 3-33 of IO-Firmware ARS
* IODC ENTRY_INIT(Search first) RET[1]
*/
#define CL_NULL 0 /* invalid */
#define CL_RANDOM 1 /* random access (as disk) */
#define CL_SEQU 2 /* sequential access (as tape) */
#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
#define CL_DISPL 9 /* half-duplex console (display) */
#define CL_FC 10 /* FiberChannel access media */
/* IODC ENTRY_INIT() */
#define ENTRY_INIT_SRCH_FRST 2
#define ENTRY_INIT_SRCH_NEXT 3
#define ENTRY_INIT_MOD_DEV 4
#define ENTRY_INIT_DEV 5
#define ENTRY_INIT_MOD 6
#define ENTRY_INIT_MSG 9
/* IODC ENTRY_IO() */
#define ENTRY_IO_BOOTIN 0
#define ENTRY_IO_BOOTOUT 1
#define ENTRY_IO_CIN 2
#define ENTRY_IO_COUT 3
#define ENTRY_IO_CLOSE 4
#define ENTRY_IO_GETMSG 9
#define ENTRY_IO_BBLOCK_IN 16
#define ENTRY_IO_BBLOCK_OUT 17
/* IODC ENTRY_SPA() */
/* IODC ENTRY_CONFIG() */
/* IODC ENTRY_TEST() */
/* IODC ENTRY_TLB() */
/* constants for OS (NVM...) */
#define OS_ID_NONE 0 /* Undefined OS ID */
......@@ -295,7 +327,13 @@ typedef struct {
#define OSTAT_RUN 6
#define OSTAT_ON 7
#ifndef __ASSEMBLY__
/* Page Zero constant offsets used by the HPMC handler */
#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
#if !defined(__ASSEMBLY__)
#ifdef __KERNEL__
#include <linux/types.h>
......@@ -331,14 +369,6 @@ struct pdc_model { /* for PDC_MODEL */
unsigned long curr_key;
};
/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
#define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */
#define PDC_MODEL_NVA_MASK (3 << 4)
#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
#define PDC_MODEL_NVA_SLOW (1 << 4)
#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */
unsigned long
#ifdef CONFIG_64BIT
......@@ -558,15 +588,97 @@ struct pdc_hpmc_pim_20 { /* PDC_PIM */
__u64 fr[32];
};
#endif /* __ASSEMBLY__ */
void pdc_console_init(void); /* in pdc_console.c */
void pdc_console_restart(void);
void setup_pdc(void); /* in inventory.c */
/* wrapper-functions from pdc.c */
int pdc_add_valid(unsigned long address);
int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
int pdc_chassis_disp(unsigned long disp);
int pdc_chassis_warn(unsigned long *warn);
int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
void *iodc_data, unsigned int iodc_data_size);
int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
struct pdc_module_path *mod_path, long mod_index);
int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
long mod_index, long addr_index);
int pdc_model_info(struct pdc_model *model);
int pdc_model_sysmodel(char *name);
int pdc_model_cpuid(unsigned long *cpu_id);
int pdc_model_versions(unsigned long *versions, int id);
int pdc_model_capabilities(unsigned long *capabilities);
int pdc_cache_info(struct pdc_cache_info *cache);
int pdc_spaceid_bits(unsigned long *space_bits);
#ifndef CONFIG_PA20
int pdc_btlb_info(struct pdc_btlb_info *btlb);
int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
#endif /* !CONFIG_PA20 */
int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
int pdc_stable_get_size(unsigned long *size);
int pdc_stable_verify_contents(void);
int pdc_stable_initialize(void);
int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
int pdc_tod_read(struct pdc_tod *tod);
int pdc_tod_set(unsigned long sec, unsigned long usec);
#ifdef CONFIG_64BIT
int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
struct pdc_memory_table *tbl, unsigned long entries);
#endif
void set_firmware_width(void);
int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
int pdc_do_reset(void);
int pdc_soft_power_info(unsigned long *power_reg);
int pdc_soft_power_button(int sw_control);
void pdc_io_reset(void);
void pdc_io_reset_devices(void);
int pdc_iodc_getc(void);
void pdc_iodc_putc(unsigned char c);
void pdc_iodc_outc(unsigned char c);
void pdc_printf(const char *fmt, ...);
void pdc_emergency_unlock(void);
int pdc_sti_call(unsigned long func, unsigned long flags,
unsigned long inptr, unsigned long outputr,
unsigned long glob_cfg);
static inline char * os_id_to_string(u16 os_id) {
switch(os_id) {
case OS_ID_NONE: return "No OS";
case OS_ID_HPUX: return "HP-UX";
case OS_ID_MPEXL: return "MPE-iX";
case OS_ID_OSF: return "OSF";
case OS_ID_HPRT: return "HP-RT";
case OS_ID_NOVEL: return "Novell Netware";
case OS_ID_LINUX: return "Linux";
default: return "Unknown";
}
}
#endif /* __KERNEL__ */
#define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
/* DEFINITION OF THE ZERO-PAGE (PAG0) */
/* based on work by Jason Eckhardt (jason@equator.com) */
/* flags of the device_path (see below) */
/* flags of the device_path */
#define PF_AUTOBOOT 0x80
#define PF_AUTOSEARCH 0x40
#define PF_TIMER 0x0F
#ifndef __ASSEMBLY__
struct device_path { /* page 1-69 */
unsigned char flags; /* flags see above! */
unsigned char bc[6]; /* bus converter routing info */
......@@ -586,63 +698,6 @@ struct pz_device {
unsigned short cl_class;/* see below */
} __attribute__((aligned(8))) ;
#endif /* __ASSEMBLY__ */
/* cl_class
* page 3-33 of IO-Firmware ARS
* IODC ENTRY_INIT(Search first) RET[1]
*/
#define CL_NULL 0 /* invalid */
#define CL_RANDOM 1 /* random access (as disk) */
#define CL_SEQU 2 /* sequential access (as tape) */
#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
#define CL_DISPL 9 /* half-duplex console (display) */
#define CL_FC 10 /* FiberChannel access media */
#if 0
/* FIXME: DEVCLASS_* duplicates CL_* (above). Delete DEVCLASS_*? */
#define DEVCLASS_RANDOM 1
#define DEVCLASS_SEQU 2
#define DEVCLASS_DUPLEX 7
#define DEVCLASS_KEYBD 8
#define DEVCLASS_DISP 9
#endif
/* IODC ENTRY_INIT() */
#define ENTRY_INIT_SRCH_FRST 2
#define ENTRY_INIT_SRCH_NEXT 3
#define ENTRY_INIT_MOD_DEV 4
#define ENTRY_INIT_DEV 5
#define ENTRY_INIT_MOD 6
#define ENTRY_INIT_MSG 9
/* IODC ENTRY_IO() */
#define ENTRY_IO_BOOTIN 0
#define ENTRY_IO_BOOTOUT 1
#define ENTRY_IO_CIN 2
#define ENTRY_IO_COUT 3
#define ENTRY_IO_CLOSE 4
#define ENTRY_IO_GETMSG 9
#define ENTRY_IO_BBLOCK_IN 16
#define ENTRY_IO_BBLOCK_OUT 17
/* IODC ENTRY_SPA() */
/* IODC ENTRY_CONFIG() */
/* IODC ENTRY_TEST() */
/* IODC ENTRY_TLB() */
/* DEFINITION OF THE ZERO-PAGE (PAG0) */
/* based on work by Jason Eckhardt (jason@equator.com) */
#ifndef __ASSEMBLY__
#define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
struct zeropage {
/* [0x000] initialize vectors (VEC) */
unsigned int vec_special; /* must be zero */
......@@ -699,93 +754,6 @@ struct zeropage {
__u32 pad608[126];
};
#endif /* __ASSEMBLY__ */
/* Page Zero constant offsets used by the HPMC handler */
#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
#ifndef __ASSEMBLY__
void pdc_console_init(void); /* in pdc_console.c */
void pdc_console_restart(void);
void setup_pdc(void); /* in inventory.c */
/* wrapper-functions from pdc.c */
int pdc_add_valid(unsigned long address);
int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
int pdc_chassis_disp(unsigned long disp);
int pdc_chassis_warn(unsigned long *warn);
int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
void *iodc_data, unsigned int iodc_data_size);
int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
struct pdc_module_path *mod_path, long mod_index);
int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
long mod_index, long addr_index);
int pdc_model_info(struct pdc_model *model);
int pdc_model_sysmodel(char *name);
int pdc_model_cpuid(unsigned long *cpu_id);
int pdc_model_versions(unsigned long *versions, int id);
int pdc_model_capabilities(unsigned long *capabilities);
int pdc_cache_info(struct pdc_cache_info *cache);
int pdc_spaceid_bits(unsigned long *space_bits);
#ifndef CONFIG_PA20
int pdc_btlb_info(struct pdc_btlb_info *btlb);
int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
#endif /* !CONFIG_PA20 */
int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
int pdc_stable_get_size(unsigned long *size);
int pdc_stable_verify_contents(void);
int pdc_stable_initialize(void);
int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
int pdc_tod_read(struct pdc_tod *tod);
int pdc_tod_set(unsigned long sec, unsigned long usec);
#ifdef CONFIG_64BIT
int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
struct pdc_memory_table *tbl, unsigned long entries);
#endif
void set_firmware_width(void);
int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
int pdc_do_reset(void);
int pdc_soft_power_info(unsigned long *power_reg);
int pdc_soft_power_button(int sw_control);
void pdc_io_reset(void);
void pdc_io_reset_devices(void);
int pdc_iodc_getc(void);
void pdc_iodc_putc(unsigned char c);
void pdc_iodc_outc(unsigned char c);
void pdc_printf(const char *fmt, ...);
void pdc_emergency_unlock(void);
int pdc_sti_call(unsigned long func, unsigned long flags,
unsigned long inptr, unsigned long outputr,
unsigned long glob_cfg);
static inline char * os_id_to_string(u16 os_id) {
switch(os_id) {
case OS_ID_NONE: return "No OS";
case OS_ID_HPUX: return "HP-UX";
case OS_ID_MPEXL: return "MPE-iX";
case OS_ID_OSF: return "OSF";
case OS_ID_HPRT: return "HP-RT";
case OS_ID_NOVEL: return "Novell Netware";
case OS_ID_LINUX: return "Linux";
default: return "Unknown";
}
}
#endif /* __ASSEMBLY__ */
#endif /* !defined(__ASSEMBLY__) */
#endif /* _PARISC_PDC_H */
include/asm-parisc/pgtable.h
View file @ cfa76f02
......@@ -49,14 +49,6 @@
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
/* Note: If you change ISTACK_SIZE, you need to change the corresponding
* values in vmlinux.lds and vmlinux64.lds (init_istack section). Also,
* the "order" and size need to agree.
*/
#define ISTACK_SIZE 32768 /* Interrupt Stack Size */
#define ISTACK_ORDER 3
/* This is the size of the initially mapped kernel memory */
#ifdef CONFIG_64BIT
#define KERNEL_INITIAL_ORDER 24 /* 0 to 1<<24 = 16MB */
......@@ -325,27 +317,27 @@ static inline void pgd_clear(pgd_t *pgd) {
* setup: the pgd is never bad, and a pmd always exists (as it's folded
* into the pgd entry)
*/
extern inline int pgd_none(pgd_t pgd) { return 0; }
extern inline int pgd_bad(pgd_t pgd) { return 0; }
extern inline int pgd_present(pgd_t pgd) { return 1; }
extern inline void pgd_clear(pgd_t * pgdp) { }
static inline int pgd_none(pgd_t pgd) { return 0; }
static inline int pgd_bad(pgd_t pgd) { return 0; }
static inline int pgd_present(pgd_t pgd) { return 1; }
static inline void pgd_clear(pgd_t * pgdp) { }
#endif
/*
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
extern inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
extern inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
extern inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
extern inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
extern inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
extern inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
extern inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~_PAGE_WRITE; return pte; }
extern inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
extern inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
extern inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_WRITE; return pte; }
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~_PAGE_WRITE; return pte; }
static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_WRITE; return pte; }
/*
* Conversion functions: convert a page and protection to a page entry,
......@@ -369,7 +361,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
return pte;
}
extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
/* Permanent address of a page. On parisc we don't have highmem. */
......
include/asm-parisc/prefetch.h
View file @ cfa76f02
......@@ -19,7 +19,7 @@
#ifdef CONFIG_PREFETCH
#define ARCH_HAS_PREFETCH
extern inline void prefetch(const void *addr)
static inline void prefetch(const void *addr)
{
__asm__("ldw 0(%0), %%r0" : : "r" (addr));
}
......@@ -27,7 +27,7 @@ extern inline void prefetch(const void *addr)
/* LDD is a PA2.0 addition. */
#ifdef CONFIG_PA20
#define ARCH_HAS_PREFETCHW
extern inline void prefetchw(const void *addr)
static inline void prefetchw(const void *addr)
{
__asm__("ldd 0(%0), %%r0" : : "r" (addr));
}
......
include/asm-parisc/rtc.h
View file @ cfa76f02
......@@ -50,10 +50,10 @@ static inline unsigned int get_rtc_time(struct rtc_time *wtime)
long int days, rem, y;
const unsigned short int *ip;
if(pdc_tod_read(&tod_data) < 0)
memset(wtime, 0, sizeof(*wtime));
if (pdc_tod_read(&tod_data) < 0)
return RTC_24H | RTC_BATT_BAD;
// most of the remainder of this function is:
// Copyright (C) 1991, 1993, 1997, 1998 Free Software Foundation, Inc.
// This was originally a part of the GNU C Library.
......
include/asm-parisc/semaphore.h
View file @ cfa76f02
......@@ -54,7 +54,7 @@ struct semaphore {
#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
extern inline void sema_init (struct semaphore *sem, int val)
static inline void sema_init (struct semaphore *sem, int val)
{
*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
}
......@@ -82,7 +82,7 @@ asmlinkage void __up(struct semaphore * sem);
* interrupts while we're messing with the semaphore. Sorry.
*/
extern __inline__ void down(struct semaphore * sem)
static inline void down(struct semaphore * sem)
{
might_sleep();
spin_lock_irq(&sem->sentry);
......@@ -94,7 +94,7 @@ extern __inline__ void down(struct semaphore * sem)
spin_unlock_irq(&sem->sentry);
}
extern __inline__ int down_interruptible(struct semaphore * sem)
static inline int down_interruptible(struct semaphore * sem)
{
int ret = 0;
might_sleep();
......@@ -112,7 +112,7 @@ extern __inline__ int down_interruptible(struct semaphore * sem)
* down_trylock returns 0 on success, 1 if we failed to get the lock.
* May not sleep, but must preserve irq state
*/
extern __inline__ int down_trylock(struct semaphore * sem)
static inline int down_trylock(struct semaphore * sem)
{
unsigned long flags;
int count;
......@@ -129,7 +129,7 @@ extern __inline__ int down_trylock(struct semaphore * sem)
* Note! This is subtle. We jump to wake people up only if
* the semaphore was negative (== somebody was waiting on it).
*/
extern __inline__ void up(struct semaphore * sem)
static inline void up(struct semaphore * sem)
{
unsigned long flags;
......
include/asm-parisc/unistd.h
View file @ cfa76f02
......@@ -797,8 +797,9 @@
#define __NR_signalfd (__NR_Linux + 302)
#define __NR_timerfd (__NR_Linux + 303)
#define __NR_eventfd (__NR_Linux + 304)
#define __NR_fallocate (__NR_Linux + 305)
#define __NR_Linux_syscalls (__NR_eventfd + 1)
#define __NR_Linux_syscalls (__NR_fallocate + 1)
#define __IGNORE_select /* newselect */
......
scripts/checkstack.pl
View file @ cfa76f02
......@@ -13,6 +13,7 @@
# Random bits by Matt Mackall <mpm@selenic.com>
# M68k port by Geert Uytterhoeven and Andreas Schwab
# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
# PARISC port by Kyle McMartin <kyle@parisc-linux.org>
#
# Usage:
# objdump -d vmlinux | scripts/checkstack.pl [arch]
......@@ -61,6 +62,8 @@ my (@stack, $re, $x, $xs);
} elsif ($arch eq 'mips') {
#88003254: 27bdffe0 addiu sp,sp,-32
$re = qr/.*addiu.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o;
} elsif ($arch eq 'parisc' || $arch eq 'parisc64') {
$re = qr/.*ldo ($x{1,8})\(sp\),sp/o;
} elsif ($arch eq 'ppc') {
#c00029f4: 94 21 ff 30 stwu r1,-208(r1)
$re = qr/.*stwu.*r1,-($x{1,8})\(r1\)/o;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7