drivers/input: Add module.h to modular drivers implicitly using it

A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in input dir
are actually calling out for <module.h> explicitly in advance.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drivers/input/input-polldev.c

@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include <linux/input-polldev.h>
 
 MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");

drivers/input/joystick/as5011.c

@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/input/as5011.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
 #define MODULE_DEVICE_ALIAS "as5011"

drivers/input/keyboard/nomadik-ske-keypad.c

@@ -18,6 +18,7 @@
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 
 #include <plat/ske.h>
 

drivers/input/keyboard/tnetv107x-keypad.c

@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/module.h>
 
 #define BITS(x)			(BIT(x) - 1)
 

drivers/input/misc/ad714x.c

@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/input/ad714x.h>
+#include <linux/module.h>
 #include "ad714x.h"
 
 #define AD714X_PWR_CTRL           0x0

drivers/input/misc/adxl34x.c

@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/input/adxl34x.h>
+#include <linux/module.h>
 
 #include "adxl34x.h"
 

drivers/input/misc/ati_remote2.c

@@ -11,6 +11,7 @@
 
 #include <linux/usb/input.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_DESC    "ATI/Philips USB RF remote driver"
 #define DRIVER_VERSION "0.3"

drivers/input/misc/cma3000_d0x.c

@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/input/cma3000.h>
+#include <linux/module.h>
 
 #include "cma3000_d0x.h"
 

drivers/input/misc/dm355evm_keys.c

@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 
 #include <linux/i2c/dm355evm_msp.h>
+#include <linux/module.h>
 
 
 /*

drivers/input/sparse-keymap.c

@@ -15,6 +15,7 @@
 
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");

drivers/input/touchscreen/ad7877.c

@@ -45,6 +45,7 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ad7877.h>
+#include <linux/module.h>
 #include <asm/irq.h>
 
 #define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(100)

drivers/input/touchscreen/ad7879-spi.c

@@ -9,6 +9,7 @@
 #include <linux/input.h>	/* BUS_SPI */
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
+#include <linux/module.h>
 
 #include "ad7879.h"
 

drivers/input/touchscreen/ad7879.c

@@ -33,6 +33,7 @@
 #include <linux/gpio.h>
 
 #include <linux/spi/ad7879.h>
+#include <linux/module.h>
 #include "ad7879.h"
 
 #define AD7879_REG_ZEROS		0

drivers/input/touchscreen/ads7846.c

@@ -31,6 +31,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 #include <asm/irq.h>
 
 /*

drivers/input/touchscreen/bu21013_ts.c

@@ -13,6 +13,7 @@
 #include <linux/input/bu21013.h>
 #include <linux/slab.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 
 #define PEN_DOWN_INTR	0
 #define MAX_FINGERS	2