ARM: S5PV310: Add support External Interrupt

This patch adds EINT(External Interrupt) support on S5PV310 and S5PC210.
All EINTs are transferred to GIC through interrupt combiner.
Signed-off-by: Jongsun Han <jongsun.han@samsung.com>
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s5pv310/Makefile

@@ -13,7 +13,7 @@ obj-				:=
 # Core support for S5PV310 system
 
 obj-$(CONFIG_CPU_S5PV310)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o gpiolib.o irq-eint.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o

arch/arm/mach-s5pv310/irq-eint.c

+/* linux/arch/arm/mach-s5pv310/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <plat/pm.h>
+#include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int s5pv310_get_irq_nr(unsigned int number)
+{
+	u32 ret = 0;
+
+	switch (number) {
+	case 0 ... 3:
+		ret = (number + IRQ_EINT0);
+		break;
+	case 4 ... 7:
+		ret = (number + (IRQ_EINT4 - 4));
+		break;
+	case 8 ... 15:
+		ret = (number + (IRQ_EINT8 - 8));
+		break;
+	default:
+		printk(KERN_ERR "number available : %d\n", number);
+	}
+
+	return ret;
+}
+
+static inline void s5pv310_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	spin_unlock(&eint_lock);
+}
+
+static void s5pv310_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask &= ~(eint_irq_to_bit(irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	spin_unlock(&eint_lock);
+}
+
+static inline void s5pv310_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5pv310_irq_eint_maskack(unsigned int irq)
+{
+	s5pv310_irq_eint_mask(irq);
+	s5pv310_irq_eint_ack(irq);
+}
+
+static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = EINT_OFFSET(irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	spin_lock(&eint_lock);
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+	spin_unlock(&eint_lock);
+
+	switch (offs) {
+	case 0 ... 7:
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+		break;
+	case 8 ... 15:
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+		break;
+	case 16 ... 23:
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+		break;
+	case 24 ... 31:
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+		break;
+	default:
+		printk(KERN_ERR "No such irq number %d", offs);
+	}
+
+	return 0;
+}
+
+static struct irq_chip s5pv310_irq_eint = {
+	.name		= "s5pv310-eint",
+	.mask		= s5pv310_irq_eint_mask,
+	.unmask		= s5pv310_irq_eint_unmask,
+	.mask_ack	= s5pv310_irq_eint_maskack,
+	.ack		= s5pv310_irq_eint_ack,
+	.set_type	= s5pv310_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5pv310_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5pv310_irq_demux_eint(unsigned int start)
+{
+	unsigned int irq;
+
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5pv310_irq_demux_eint(IRQ_EINT(16));
+	s5pv310_irq_demux_eint(IRQ_EINT(24));
+}
+
+static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+	u32 *irq_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+
+	chip->mask(irq);
+
+	if (chip->ack)
+		chip->ack(irq);
+
+	generic_handle_irq(*irq_data);
+
+	chip->unmask(irq);
+}
+
+int __init s5pv310_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = 0 ; irq <= 31 ; irq++) {
+		set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint);
+		set_irq_handler(IRQ_EINT(irq), handle_level_irq);
+		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31);
+
+	for (irq = 0 ; irq <= 15 ; irq++) {
+		eint0_15_data[irq] = IRQ_EINT(irq);
+
+		set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]);
+		set_irq_chained_handler(s5pv310_get_irq_nr(irq),
+					s5pv310_irq_eint0_15);
+	}
+
+	return 0;
+}
+
+arch_initcall(s5pv310_init_irq_eint);