Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits)
  ARM: 7304/1: ioremap: fix boundary check when reusing static mapping
  ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts
  ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2
  ARM: 7298/1: realview: fix mapping of MPCore private memory region
  PCMCIA: fix sa1111 oops on remove
  ARM: 7288/1: mach-sa1100: add missing module_init() call
  ARM: 7297/1: smp_twd: make sure timer is stopped before registering it
  ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards
  ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block
  ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP
  ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs
  ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary
  ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes
  MFD: ucb1x00-ts: fix resume failure
  MFD: ucb1x00-core: fix gpiolib direction_output handling
  MFD: ucb1x00-core: fix missing restore of io output data on resume
  MFD: mcp-core: fix mcp_priv() to be more type safe
  MFD: mcp-core: fix complaints from the genirq layer
  Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus."
  Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources."
  ...

Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into
mach-imx5 (commit 784a90c0: "ARM i.MX: Merge i.MX5 support into
mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by
the CPU_V7 logic from it in the old location in rmk's branch (commit
a092f2b1: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for
ARMv7 CPUs").

arch/arm/Kconfig

@@ -754,7 +754,7 @@ config ARCH_SA1100
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
@@ -825,7 +825,6 @@ config ARCH_S5PC100
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -842,7 +841,6 @@ config ARCH_S5PV210
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK

arch/arm/common/gic.c

@@ -41,6 +41,7 @@
 
 #include <asm/irq.h>
 #include <asm/exception.h>
+#include <asm/smp_plat.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
@@ -352,11 +353,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	unsigned int gic_irqs = gic->gic_irqs;
 	struct irq_domain *domain = &gic->domain;
 	void __iomem *base = gic_data_dist_base(gic);
-	u32 cpu = 0;
-
-#ifdef CONFIG_SMP
-	cpu = cpu_logical_map(smp_processor_id());
-#endif
+	u32 cpu = cpu_logical_map(smp_processor_id());
 
 	cpumask = 1 << cpu;
 	cpumask |= cpumask << 8;

arch/arm/include/asm/assembler.h

@@ -237,7 +237,7 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 
-	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
 9999:
 	.if	\inc == 1
 	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
@@ -277,7 +277,7 @@
 
 #else	/* !CONFIG_THUMB2_KERNEL */
 
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
 	.rept	\rept
 9999:
 	.if	\inc == 1

arch/arm/include/asm/domain.h

@@ -83,9 +83,9 @@
  * instructions (inline assembly)
  */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	#instr "t"
+#define TUSER(instr)	#instr "t"
 #else
-#define T(instr)	#instr
+#define TUSER(instr)	#instr
 #endif
 
 #else /* __ASSEMBLY__ */
@@ -95,9 +95,9 @@
  * instructions
  */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	instr ## t
+#define TUSER(instr)	instr ## t
 #else
-#define T(instr)	instr
+#define TUSER(instr)	instr
 #endif
 
 #endif /* __ASSEMBLY__ */

arch/arm/include/asm/futex.h

@@ -75,9 +75,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 
 #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%3]\n"			\
+	"1:	" TUSER(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%3]\n"			\
+	"2:	" TUSER(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
 	__futex_atomic_ex_table("%5")				\
 	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
@@ -95,10 +95,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	" T(ldr) "	%1, [%4]\n"
+	"1:	" TUSER(ldr) "	%1, [%4]\n"
 	"	teq	%1, %2\n"
 	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	" T(streq) "	%3, [%4]\n"
+	"2:	" TUSER(streq) "	%3, [%4]\n"
 	__futex_atomic_ex_table("%5")
 	: "+r" (ret), "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)

arch/arm/include/asm/smp.h

@@ -70,12 +70,6 @@ extern void platform_secondary_init(unsigned int cpu);
  */
 extern void platform_smp_prepare_cpus(unsigned int);
 
-/*
- * Logical CPU mapping.
- */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
-
 /*
  * Initial data for bringing up a secondary CPU.
  */

arch/arm/include/asm/smp_plat.h

@@ -43,4 +43,10 @@ static inline int cache_ops_need_broadcast(void)
 }
 #endif
 
+/*
+ * Logical CPU mapping.
+ */
+extern int __cpu_logical_map[];
+#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
+
 #endif

arch/arm/include/asm/uaccess.h

@@ -227,7 +227,7 @@ do {									\
 
 #define __get_user_asm_byte(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldrb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldrb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -263,7 +263,7 @@ do {									\
 
 #define __get_user_asm_word(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldr) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -308,7 +308,7 @@ do {									\
 
 #define __put_user_asm_byte(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(strb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(strb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -341,7 +341,7 @@ do {									\
 
 #define __put_user_asm_word(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(str) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(str) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -366,10 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
- ARM(	"1:	" T(str) "	" __reg_oper1 ", [%1], #4\n"	)	\
- ARM(	"2:	" T(str) "	" __reg_oper0 ", [%1]\n"	)	\
- THUMB(	"1:	" T(str) "	" __reg_oper1 ", [%1]\n"	)	\
- THUMB(	"2:	" T(str) "	" __reg_oper0 ", [%1, #4]\n"	)	\
+ ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
+ ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
+ THUMB(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1]\n"	) \
+ THUMB(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1, #4]\n"	) \
 	"3:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\

arch/arm/kernel/entry-common.S

@@ -149,6 +149,11 @@ ENDPROC(ret_from_fork)
 #endif
 #endif
 
+.macro mcount_adjust_addr rd, rn
+	bic	\rd, \rn, #1		@ clear the Thumb bit if present
+	sub	\rd, \rd, #MCOUNT_INSN_SIZE
+.endm
+
 .macro __mcount suffix
 	mcount_enter
 	ldr	r0, =ftrace_trace_function
@@ -173,8 +178,7 @@ ENDPROC(ret_from_fork)
 	mcount_exit
 
 1: 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function
 	adr	lr, BSYM(2f)
 	mov	pc, r2
 2:	mcount_exit
@@ -184,8 +188,7 @@ ENDPROC(ret_from_fork)
 	mcount_enter
 
 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function
 
 	.globl ftrace_call\suffix
 ftrace_call\suffix:
@@ -205,11 +208,11 @@ ftrace_graph_call\suffix:
 #ifdef CONFIG_DYNAMIC_FTRACE
 	@ called from __ftrace_caller, saved in mcount_enter
 	ldr	r1, [sp, #16]		@ instrumented routine (func)
+	mcount_adjust_addr	r1, r1
 #else
 	@ called from __mcount, untouched in lr
-	mov	r1, lr			@ instrumented routine (func)
+	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
 #endif
-	sub	r1, r1, #MCOUNT_INSN_SIZE
 	mov	r2, fp			@ frame pointer
 	bl	prepare_ftrace_return
 	mcount_exit

arch/arm/kernel/setup.c

@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/of_fdt.h>
-#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -160,7 +159,7 @@ static struct resource mem_res[] = {
 		.flags = IORESOURCE_MEM
 	},
 	{
-		.name = "Kernel text",
+		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
 		.flags = IORESOURCE_MEM
@@ -427,6 +426,20 @@ void cpu_init(void)
 	    : "r14");
 }
 
+int __cpu_logical_map[NR_CPUS];
+
+void __init smp_setup_processor_id(void)
+{
+	int i;
+	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
+
+	cpu_logical_map(0) = cpu;
+	for (i = 1; i < NR_CPUS; ++i)
+		cpu_logical_map(i) = i == cpu ? 0 : i;
+
+	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;

arch/arm/kernel/smp.c

@@ -233,20 +233,6 @@ void __ref cpu_die(void)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-int __cpu_logical_map[NR_CPUS];
-
-void __init smp_setup_processor_id(void)
-{
-	int i;
-	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
-
-	cpu_logical_map(0) = cpu;
-	for (i = 1; i < NR_CPUS; ++i)
-		cpu_logical_map(i) = i == cpu ? 0 : i;
-
-	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
-}
-
 /*
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
@@ -443,9 +429,7 @@ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
 static void ipi_timer(void)
 {
 	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
-	irq_enter();
 	evt->event_handler(evt);
-	irq_exit();
 }
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
@@ -548,7 +532,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 
 	switch (ipinr) {
 	case IPI_TIMER:
+		irq_enter();
 		ipi_timer();
+		irq_exit();
 		break;
 
 	case IPI_RESCHEDULE:
@@ -556,15 +542,21 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		break;
 
 	case IPI_CALL_FUNC:
+		irq_enter();
 		generic_smp_call_function_interrupt();
+		irq_exit();
 		break;
 
 	case IPI_CALL_FUNC_SINGLE:
+		irq_enter();
 		generic_smp_call_function_single_interrupt();
+		irq_exit();
 		break;
 
 	case IPI_CPU_STOP:
+		irq_enter();
 		ipi_cpu_stop(cpu);
+		irq_exit();
 		break;
 
 	default:

arch/arm/kernel/smp_twd.c

@@ -252,6 +252,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	else
 		twd_calibrate_rate();
 
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 			CLOCK_EVT_FEAT_C3STOP;

arch/arm/kernel/vmlinux.lds.S

@@ -4,6 +4,7 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
@@ -181,7 +182,7 @@ SECTIONS
 	}
 #endif
 
-	PERCPU_SECTION(32)
+	PERCPU_SECTION(L1_CACHE_BYTES)
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
@@ -212,13 +213,13 @@ SECTIONS
 #endif
 
 		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(32)
-		READ_MOSTLY_DATA(32)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
 		 */
-		. = ALIGN(32);
+		. = ALIGN(4);
 		__start___ex_table = .;
 #ifdef CONFIG_MMU
 		*(__ex_table)

arch/arm/lib/getuser.S

@@ -31,18 +31,18 @@
 #include <asm/domain.h>
 
 ENTRY(__get_user_1)
-1:	T(ldrb)	r2, [r0]
+1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
 #ifdef CONFIG_THUMB2_KERNEL
-2:	T(ldrb)	r2, [r0]
-3:	T(ldrb)	r3, [r0, #1]
+2: TUSER(ldrb)	r2, [r0]
+3: TUSER(ldrb)	r3, [r0, #1]
 #else
-2:	T(ldrb)	r2, [r0], #1
-3:	T(ldrb)	r3, [r0]
+2: TUSER(ldrb)	r2, [r0], #1
+3: TUSER(ldrb)	r3, [r0]
 #endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
@@ -54,7 +54,7 @@ ENTRY(__get_user_2)
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
-4:	T(ldr)	r2, [r0]
+4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_4)

arch/arm/lib/putuser.S

@@ -31,7 +31,7 @@
 #include <asm/domain.h>
 
 ENTRY(__put_user_1)
-1:	T(strb)	r2, [r0]
+1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
@@ -40,19 +40,19 @@ ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0]
-3:	T(strb)	ip, [r0, #1]
+2: TUSER(strb)	r2, [r0]
+3: TUSER(strb)	ip, [r0, #1]
 #else
-2:	T(strb)	ip, [r0]
-3:	T(strb)	r2, [r0, #1]
+2: TUSER(strb)	ip, [r0]
+3: TUSER(strb)	r2, [r0, #1]
 #endif
 #else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0], #1
-3:	T(strb)	ip, [r0]
+2: TUSER(strb)	r2, [r0], #1
+3: TUSER(strb)	ip, [r0]
 #else
-2:	T(strb)	ip, [r0], #1
-3:	T(strb)	r2, [r0]
+2: TUSER(strb)	ip, [r0], #1
+3: TUSER(strb)	r2, [r0]
 #endif
 #endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
@@ -60,18 +60,18 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
-4:	T(str)	r2, [r0]
+4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
 #ifdef CONFIG_THUMB2_KERNEL
-5:	T(str)	r2, [r0]
-6:	T(str)	r3, [r0, #4]
+5: TUSER(str)	r2, [r0]
+6: TUSER(str)	r3, [r0, #4]
 #else
-5:	T(str)	r2, [r0], #4
-6:	T(str)	r3, [r0]
+5: TUSER(str)	r2, [r0], #4
+6: TUSER(str)	r3, [r0]
 #endif
 	mov	r0, #0
 	mov	pc, lr

arch/arm/lib/uaccess.S

@@ -32,11 +32,11 @@
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
 		b	.Lc2u_dest_aligned
 
@@ -59,7 +59,7 @@ ENTRY(__copy_to_user)
 		addmi	ip, r2, #4
 		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -88,18 +88,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
 		ldrne	r3, [r1], #4
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_0fupi
 .Lc2u_0nowords:	teq	ip, #0
 		beq	.Lc2u_finished
 .Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_not_enough:
@@ -120,7 +120,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -155,18 +155,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #8
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #24
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_1fupi
 .Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_2fupi:	subs	r2, r2, #4
@@ -175,7 +175,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -210,18 +210,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #16
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #16
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_2fupi
 .Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_3fupi:	subs	r2, r2, #4
@@ -230,7 +230,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -265,18 +265,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #24
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #8
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_3fupi
 .Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)
 
@@ -295,11 +295,11 @@ ENDPROC(__copy_to_user)
 .Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
 		b	.Lcfu_dest_aligned
@@ -322,7 +322,7 @@ ENTRY(__copy_from_user)
 .Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_0nowords
-USER(		T(ldr)	r3, [r1], #4)
+USER(	TUSER(	ldr)	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
@@ -351,18 +351,18 @@ USER(		T(ldr)	r3, [r1], #4)
 		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		T(ldrne) r3, [r1], #4			@ Shouldnt fault
+	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_0fupi
 .Lcfu_0nowords:	teq	ip, #0
 		beq	.Lcfu_finished
 .Lcfu_nowords:	cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -375,7 +375,7 @@ USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 
 .Lcfu_src_not_aligned:
 		bic	r1, r1, #3
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
 		bgt	.Lcfu_3fupi
 		beq	.Lcfu_2fupi
@@ -383,7 +383,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -418,7 +418,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #8
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -438,7 +438,7 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -474,7 +474,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #16
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -486,7 +486,7 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -494,7 +494,7 @@ USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -529,7 +529,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #24
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -539,9 +539,9 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)

arch/arm/mach-exynos/hotplug.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 #include <mach/regs-pmu.h>
 

arch/arm/mach-exynos/platsmp.c

@@ -23,6 +23,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
 #include <mach/hardware.h>

arch/arm/mach-highbank/highbank.c

@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
@@ -72,9 +73,7 @@ static void __init highbank_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
-#ifdef CONFIG_SMP
 	cpu = cpu_logical_map(cpu);
-#endif
 	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

arch/arm/mach-imx/Kconfig

@@ -87,7 +87,6 @@ config SOC_IMX35
 
 config SOC_IMX5
 	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2

arch/arm/mach-imx/src.c

@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
+#include <asm/smp_plat.h>
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020
@@ -24,10 +25,6 @@
 
 static void __iomem *src_base;
 
-#ifndef CONFIG_SMP
-#define cpu_logical_map(cpu)		0
-#endif
-
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;

arch/arm/mach-msm/hotplug.c

@@ -11,6 +11,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 

arch/arm/mach-msm/platsmp.c

@@ -20,6 +20,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
+#include <asm/smp_plat.h>
 
 #include <mach/msm_iomap.h>
 

arch/arm/mach-omap2/Kconfig

@@ -33,7 +33,6 @@ config ARCH_OMAP3
 	default y
 	select CPU_V7
 	select USB_ARCH_HAS_EHCI
-	select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
 	select ARCH_HAS_OPP
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM

arch/arm/mach-pxa/devices.c

@@ -415,29 +415,9 @@ static struct resource pxa_rtc_resources[] = {
 	},
 };
 
-static struct resource sa1100_rtc_resources[] = {
-	[0] = {
-		.start  = 0x40900000,
-		.end	= 0x409000ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
 struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.num_resources  = ARRAY_SIZE(sa1100_rtc_resources),
-	.resource       = sa1100_rtc_resources,
 };
 
 struct platform_device pxa_device_rtc = {

arch/arm/mach-pxa/pxa25x.c

@@ -209,8 +209,6 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =

arch/arm/mach-pxa/pxa27x.c

@@ -230,8 +230,6 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/pxa300.c

@@ -89,7 +89,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
 static struct clk_lookup common_clkregs[] = {
 	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);

arch/arm/mach-pxa/pxa320.c

@@ -83,7 +83,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
 static struct clk_lookup pxa320_clkregs[] = {
 	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static int __init pxa320_init(void)

arch/arm/mach-pxa/pxa3xx.c

@@ -67,7 +67,6 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
 	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),

arch/arm/mach-pxa/pxa95x.c

@@ -217,7 +217,6 @@ static struct clk_lookup pxa95x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
 	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),

arch/arm/mach-realview/hotplug.c

@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 

arch/arm/mach-realview/include/mach/board-eb.h

@@ -47,21 +47,23 @@
 #define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
 
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x10100600
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
 #define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
 #else
-#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x1F000600
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
 #define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
+#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
+#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
+
+#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
+#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
+
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */

arch/arm/mach-realview/include/mach/board-pb11mp.h

@@ -75,6 +75,8 @@
 /*
  * Testchip peripheral and fpga gic regions
  */
+#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
+#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
 #define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
 #define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
 #define REALVIEW_TC11MP_TWD_BASE		0x1F000600

arch/arm/mach-realview/realview_eb.c

@@ -91,14 +91,9 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 
 static struct map_desc realview_eb11mp_io_desc[] __initdata = {
 	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
+		.length		= REALVIEW_EB11MP_PRIV_MEM_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),

arch/arm/mach-realview/realview_pb11mp.c

@@ -64,15 +64,10 @@ static struct map_desc realview_pb11mp_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
+		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
+		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),

arch/arm/mach-sa1100/assabet.c

@@ -202,7 +202,6 @@ static struct irda_platform_data assabet_irda_data = {
 static struct mcp_plat_data assabet_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init assabet_init(void)
@@ -253,17 +252,6 @@ static void __init assabet_init(void)
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 	sa11x0_register_mcp(&assabet_mcp_data);
 }
 

arch/arm/mach-sa1100/cerf.c

@@ -124,23 +124,12 @@ static void __init cerf_map_io(void)
 static struct mcp_plat_data cerf_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&cerf_mcp_data);
 }
 

arch/arm/mach-sa1100/clock.c

@@ -11,39 +11,17 @@
 #include <linux/clk.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-};
-
+/*
+ * Very simple clock implementation - we only have one clock to deal with.
+ */
 struct clk {
-	const struct clkops	*ops;
-	unsigned long		rate;
 	unsigned int		enabled;
 };
 
-#define INIT_CLKREG(_clk, _devname, _conname)		\
-	{						\
-		.clk		= _clk,			\
-		.dev_id		= _devname,		\
-		.con_id		= _conname,		\
-	}
-
-#define DEFINE_CLK(_name, _ops, _rate)			\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-		.rate	= _rate,			\
-	}
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void clk_gpio27_enable(struct clk *clk)
+static void clk_gpio27_enable(void)
 {
 	/*
 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
@@ -54,22 +32,38 @@ static void clk_gpio27_enable(struct clk *clk)
 	TUCR = TUCR_3_6864MHz;
 }
 
-static void clk_gpio27_disable(struct clk *clk)
+static void clk_gpio27_disable(void)
 {
 	TUCR = 0;
 	GPDR &= ~GPIO_32_768kHz;
 	GAFR &= ~GPIO_32_768kHz;
 }
 
+static struct clk clk_gpio27;
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	const char *devname = dev_name(dev);
+
+	return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
+		clk_gpio27_enable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
-
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
@@ -82,48 +76,13 @@ void clk_disable(struct clk *clk)
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
+		clk_gpio27_disable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
-	unsigned long rate;
-
-	rate = clk->rate;
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-
-	return rate;
+	return 3686400;
 }
 EXPORT_SYMBOL(clk_get_rate);
-
-const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-static void clk_dummy_enable(struct clk *clk) { }
-static void clk_dummy_disable(struct clk *clk) { }
-
-const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400);
-static DEFINE_CLK(dummy, &clk_dummy_ops, 0);
-
-static struct clk_lookup sa11xx_clkregs[] = {
-	INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-static int __init sa11xx_clk_init(void)
-{
-	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
-	return 0;
-}
-
-postcore_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/collie.c

@@ -27,7 +27,6 @@
 #include <linux/timer.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
-#include <linux/mfd/ucb1x00.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -86,15 +85,10 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 	.num_devs	= 1,
 };
 
-static struct ucb1x00_plat_data collie_ucb1x00_data = {
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
-};
-
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
-	.codec		= "ucb1x00",
-	.codec_pdata	= &collie_ucb1x00_data,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
 };
 
 /*
@@ -144,8 +138,6 @@ static struct pda_power_pdata collie_power_data = {
 static struct resource collie_power_resource[] = {
 	{
 		.name		= "ac",
-		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
-		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
 		.flags		= IORESOURCE_IRQ |
 				  IORESOURCE_IRQ_HIGHEDGE |
 				  IORESOURCE_IRQ_LOWEDGE,
@@ -347,7 +339,8 @@ static void __init collie_init(void)
 
 	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
 
-
+	collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
+	collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
 	platform_scoop_config = &collie_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -357,16 +350,6 @@ static void __init collie_init(void)
 
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();

arch/arm/mach-sa1100/cpu-sa1100.c

@@ -228,7 +228,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct cpufreq_driver sa1100_driver = {
+static struct cpufreq_driver sa1100_driver __refdata = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= sa11x0_verify_speed,
 	.target		= sa1100_target,

arch/arm/mach-sa1100/generic.c

@@ -217,15 +217,10 @@ static struct platform_device sa11x0uart3_device = {
 static struct resource sa11x0mcp_resources[] = {
 	[0] = {
 		.start	= __PREG(Ser4MCCR0),
-		.end	= __PREG(Ser4MCCR0) + 0x1C - 1,
+		.end	= __PREG(Ser4MCCR0) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= __PREG(Ser4MCCR1),
-		.end	= __PREG(Ser4MCCR1) + 0x4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
 		.start	= IRQ_Ser4MCP,
 		.end	= IRQ_Ser4MCP,
 		.flags	= IORESOURCE_IRQ,
@@ -350,29 +345,9 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
-static struct resource sa11x0rtc_resources[] = {
-	[0] = {
-		.start	= 0x90010000,
-		.end	= 0x900100ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_RTC1Hz,
-		.end	= IRQ_RTC1Hz,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_RTCAlrm,
-		.end	= IRQ_RTCAlrm,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
 static struct platform_device sa11x0rtc_device = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.resource	= sa11x0rtc_resources,
-	.num_resources	= ARRAY_SIZE(sa11x0rtc_resources),
 };
 
 static struct platform_device *sa11x0_devices[] __initdata = {

arch/arm/mach-sa1100/include/mach/mcp.h

@@ -17,8 +17,6 @@ struct mcp_plat_data {
 	u32 mccr1;
 	unsigned int sclk_rate;
 	int gpio_base;
-	const char *codec;
-	void *codec_pdata;
 };
 
 #endif

arch/arm/mach-sa1100/jornada720_ssp.c

@@ -198,3 +198,5 @@ static int __init jornada_ssp_init(void)
 {
 	return platform_driver_register(&jornadassp_driver);
 }
+
+module_init(jornada_ssp_init);

arch/arm/mach-sa1100/lart.c

@@ -24,20 +24,10 @@
 static struct mcp_plat_data lart_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init lart_init(void)
 {
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 

arch/arm/mach-sa1100/shannon.c

@@ -55,22 +55,11 @@ static struct resource shannon_flash_resource = {
 static struct mcp_plat_data shannon_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init shannon_init(void)
 {
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&shannon_mcp_data);
 }
 

arch/arm/mach-sa1100/simpad.c

@@ -14,7 +14,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <linux/mfd/ucb1x00.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -188,15 +187,10 @@ static struct resource simpad_flash_resources [] = {
 	}
 };
 
-static struct ucb1x00_plat_data simpad_ucb1x00_data = {
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
-};
-
 static struct mcp_plat_data simpad_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1300",
-	.codec_pdata	= &simpad_ucb1x00_data,
+	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
 };
 
 
@@ -384,16 +378,6 @@ static int __init simpad_init(void)
 
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&simpad_mcp_data);
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <mach/common.h>
 #include <mach/r8a7779.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <mach/common.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>

arch/arm/mach-ux500/hotplug.c

@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 

arch/arm/mach-ux500/platsmp.c

@@ -19,6 +19,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -217,7 +217,7 @@ static void __init ct_ca9x4_init(void)
 }
 
 #ifdef CONFIG_SMP
-static void ct_ca9x4_init_cpu_map(void)
+static void __init ct_ca9x4_init_cpu_map(void)
 {
 	int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
 
@@ -233,7 +233,7 @@ static void ct_ca9x4_init_cpu_map(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-static void ct_ca9x4_smp_enable(unsigned int max_cpus)
+static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
 {
 	scu_enable(MMIO_P2V(A9_MPCORE_SCU));
 }

arch/arm/mach-vexpress/hotplug.c

@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/system.h>
 
 extern volatile int pen_release;

arch/arm/mm/Kconfig

@@ -882,6 +882,7 @@ config CACHE_XSC3L2
 
 config ARM_L1_CACHE_SHIFT_6
 	bool
+	default y if CPU_V7
 	help
 	  Setting ARM L1 cache line size to 64 Bytes.
 

arch/arm/mm/init.c

@@ -310,7 +310,7 @@ static void arm_memory_present(void)
 
 static bool arm_memblock_steal_permitted = true;
 
-phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align)
+phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 {
 	phys_addr_t phys;
 

arch/arm/mm/ioremap.c

@@ -225,7 +225,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 		if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
 			continue;
 		if (__phys_to_pfn(area->phys_addr) > pfn ||
-		    __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
+		    __pfn_to_phys(pfn) + offset + size-1 >
+		    area->phys_addr + area->size-1)
 			continue;
 		/* we can drop the lock here as we know *area is static */
 		read_unlock(&vmlist_lock);

arch/arm/mm/proc-v7.S

@@ -148,10 +148,6 @@ ENDPROC(cpu_v7_do_resume)
  *	Initialise TLB, Caches, and MMU state ready to switch the MMU
  *	on.  Return in r0 the new CP15 C1 control register setting.
  *
- *	We automatically detect if we have a Harvard cache, and use the
- *	Harvard cache control instructions insead of the unified cache
- *	control instructions.
- *
  *	This should be able to cover all ARMv7 cores.
  *
  *	It is assumed that:
@@ -251,9 +247,7 @@ __v7_setup:
 #endif
 
 3:	mov	r10, #0
-#ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-#endif
 	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
@@ -329,16 +323,6 @@ __v7_ca5mp_proc_info:
 	__v7_proc __v7_ca5mp_setup
 	.size	__v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
 
-	/*
-	 * ARM Ltd. Cortex A7 processor.
-	 */
-	.type	__v7_ca7mp_proc_info, #object
-__v7_ca7mp_proc_info:
-	.long	0x410fc070
-	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
-	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
-
 	/*
 	 * ARM Ltd. Cortex A9 processor.
 	 */
@@ -350,6 +334,16 @@ __v7_ca9mp_proc_info:
 	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
 #endif	/* CONFIG_ARM_LPAE */
 
+	/*
+	 * ARM Ltd. Cortex A7 processor.
+	 */
+	.type	__v7_ca7mp_proc_info, #object
+__v7_ca7mp_proc_info:
+	.long	0x410fc070
+	.long	0xff0ffff0
+	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
+
 	/*
 	 * ARM Ltd. Cortex A15 processor.
 	 */

arch/arm/plat-versatile/platsmp.c

@@ -16,6 +16,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/hardware/gic.h>
 
 /*

drivers/mfd/mcp-core.c

@@ -26,35 +26,9 @@
 #define to_mcp(d)		container_of(d, struct mcp, attached_device)
 #define to_mcp_driver(d)	container_of(d, struct mcp_driver, drv)
 
-static const struct mcp_device_id *mcp_match_id(const struct mcp_device_id *id,
-						const char *codec)
-{
-	while (id->name[0]) {
-		if (strcmp(codec, id->name) == 0)
-			return id;
-		id++;
-	}
-	return NULL;
-}
-
-const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp)
-{
-	const struct mcp_driver *driver =
-		to_mcp_driver(mcp->attached_device.driver);
-
-	return mcp_match_id(driver->id_table, mcp->codec);
-}
-EXPORT_SYMBOL(mcp_get_device_id);
-
 static int mcp_bus_match(struct device *dev, struct device_driver *drv)
 {
-	const struct mcp *mcp = to_mcp(dev);
-	const struct mcp_driver *driver = to_mcp_driver(drv);
-
-	if (driver->id_table)
-		return !!mcp_match_id(driver->id_table, mcp->codec);
-
-	return 0;
+	return 1;
 }
 
 static int mcp_bus_probe(struct device *dev)
@@ -100,18 +74,9 @@ static int mcp_bus_resume(struct device *dev)
 	return ret;
 }
 
-static int mcp_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct mcp *mcp = to_mcp(dev);
-
-	add_uevent_var(env, "MODALIAS=%s%s", MCP_MODULE_PREFIX, mcp->codec);
-	return 0;
-}
-
 static struct bus_type mcp_bus_type = {
 	.name		= "mcp",
 	.match		= mcp_bus_match,
-	.uevent		= mcp_bus_uevent,
 	.probe		= mcp_bus_probe,
 	.remove		= mcp_bus_remove,
 	.suspend	= mcp_bus_suspend,
@@ -128,9 +93,11 @@ static struct bus_type mcp_bus_type = {
  */
 void mcp_set_telecom_divisor(struct mcp *mcp, unsigned int div)
 {
-	spin_lock_irq(&mcp->lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mcp->lock, flags);
 	mcp->ops->set_telecom_divisor(mcp, div);
-	spin_unlock_irq(&mcp->lock);
+	spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_set_telecom_divisor);
 
@@ -143,9 +110,11 @@ EXPORT_SYMBOL(mcp_set_telecom_divisor);
  */
 void mcp_set_audio_divisor(struct mcp *mcp, unsigned int div)
 {
-	spin_lock_irq(&mcp->lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mcp->lock, flags);
 	mcp->ops->set_audio_divisor(mcp, div);
-	spin_unlock_irq(&mcp->lock);
+	spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_set_audio_divisor);
 
@@ -198,10 +167,11 @@ EXPORT_SYMBOL(mcp_reg_read);
  */
 void mcp_enable(struct mcp *mcp)
 {
-	spin_lock_irq(&mcp->lock);
+	unsigned long flags;
+	spin_lock_irqsave(&mcp->lock, flags);
 	if (mcp->use_count++ == 0)
 		mcp->ops->enable(mcp);
-	spin_unlock_irq(&mcp->lock);
+	spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_enable);
 
@@ -247,14 +217,9 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 }
 EXPORT_SYMBOL(mcp_host_alloc);
 
-int mcp_host_register(struct mcp *mcp, void *pdata)
+int mcp_host_register(struct mcp *mcp)
 {
-	if (!mcp->codec)
-		return -EINVAL;
-
-	mcp->attached_device.platform_data = pdata;
 	dev_set_name(&mcp->attached_device, "mcp0");
-	request_module("%s%s", MCP_MODULE_PREFIX, mcp->codec);
 	return device_register(&mcp->attached_device);
 }
 EXPORT_SYMBOL(mcp_host_register);

drivers/mfd/mcp-sa11x0.c

@@ -19,7 +19,6 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/mcp.h>
-#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
@@ -27,19 +26,12 @@
 #include <asm/system.h>
 #include <mach/mcp.h>
 
-/* Register offsets */
-#define MCCR0	0x00
-#define MCDR0	0x08
-#define MCDR1	0x0C
-#define MCDR2	0x10
-#define MCSR	0x18
-#define MCCR1	0x00
+#include <mach/assabet.h>
+
 
 struct mcp_sa11x0 {
 	u32	mccr0;
 	u32	mccr1;
-	unsigned char	*mccr0_base;
-	unsigned char	*mccr1_base;
 };
 
 #define priv(mcp)	((struct mcp_sa11x0 *)mcp_priv(mcp))
@@ -47,25 +39,25 @@ struct mcp_sa11x0 {
 static void
 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
+	unsigned int mccr0;
 
 	divisor /= 32;
 
-	priv->mccr0 &= ~0x00007f00;
-	priv->mccr0 |= divisor << 8;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	mccr0 = Ser4MCCR0 & ~0x00007f00;
+	mccr0 |= divisor << 8;
+	Ser4MCCR0 = mccr0;
 }
 
 static void
 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
+	unsigned int mccr0;
 
 	divisor /= 32;
 
-	priv->mccr0 &= ~0x0000007f;
-	priv->mccr0 |= divisor;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	mccr0 = Ser4MCCR0 & ~0x0000007f;
+	mccr0 |= divisor;
+	Ser4MCCR0 = mccr0;
 }
 
 /*
@@ -79,16 +71,12 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 {
 	int ret = -ETIME;
 	int i;
-	u32 mcpreg;
-	struct mcp_sa11x0 *priv = priv(mcp);
 
-	mcpreg = reg << 17 | MCDR2_Wr | (val & 0xffff);
-	__raw_writel(mcpreg, priv->mccr0_base + MCDR2);
+	Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		mcpreg = __raw_readl(priv->mccr0_base + MCSR);
-		if (mcpreg & MCSR_CWC) {
+		if (Ser4MCSR & MCSR_CWC) {
 			ret = 0;
 			break;
 		}
@@ -109,18 +97,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 {
 	int ret = -ETIME;
 	int i;
-	u32 mcpreg;
-	struct mcp_sa11x0 *priv = priv(mcp);
 
-	mcpreg = reg << 17 | MCDR2_Rd;
-	__raw_writel(mcpreg, priv->mccr0_base + MCDR2);
+	Ser4MCDR2 = reg << 17 | MCDR2_Rd;
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		mcpreg = __raw_readl(priv->mccr0_base + MCSR);
-		if (mcpreg & MCSR_CRC) {
-			ret = __raw_readl(priv->mccr0_base + MCDR2)
-				& 0xffff;
+		if (Ser4MCSR & MCSR_CRC) {
+			ret = Ser4MCDR2 & 0xffff;
 			break;
 		}
 	}
@@ -133,19 +116,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 
 static void mcp_sa11x0_enable(struct mcp *mcp)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
-
-	__raw_writel(-1, priv->mccr0_base + MCSR);
-	priv->mccr0 |= MCCR0_MCE;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	Ser4MCSR = -1;
+	Ser4MCCR0 |= MCCR0_MCE;
 }
 
 static void mcp_sa11x0_disable(struct mcp *mcp)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
-
-	priv->mccr0 &= ~MCCR0_MCE;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	Ser4MCCR0 &= ~MCCR0_MCE;
 }
 
 /*
@@ -165,69 +142,50 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
 	struct mcp_plat_data *data = pdev->dev.platform_data;
 	struct mcp *mcp;
 	int ret;
-	struct mcp_sa11x0 *priv;
-	struct resource *res_mem0, *res_mem1;
-	u32 size0, size1;
 
 	if (!data)
 		return -ENODEV;
 
-	if (!data->codec)
-		return -ENODEV;
-
-	res_mem0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res_mem0)
-		return -ENODEV;
-	size0 = res_mem0->end - res_mem0->start + 1;
-
-	res_mem1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res_mem1)
-		return -ENODEV;
-	size1 = res_mem1->end - res_mem1->start + 1;
-
-	if (!request_mem_region(res_mem0->start, size0, "sa11x0-mcp"))
+	if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
 		return -EBUSY;
 
-	if (!request_mem_region(res_mem1->start, size1, "sa11x0-mcp")) {
-		ret = -EBUSY;
-		goto release;
-	}
-
 	mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
 	if (!mcp) {
 		ret = -ENOMEM;
-		goto release2;
+		goto release;
 	}
 
-	priv = priv(mcp);
-
 	mcp->owner		= THIS_MODULE;
 	mcp->ops		= &mcp_sa11x0;
 	mcp->sclk_rate		= data->sclk_rate;
-	mcp->dma_audio_rd	= DDAR_DevAdd(res_mem0->start + MCDR0)
-				+ DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->dma_audio_wr	= DDAR_DevAdd(res_mem0->start + MCDR0)
-				+ DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->dma_telco_rd	= DDAR_DevAdd(res_mem0->start + MCDR1)
-				+ DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->dma_telco_wr	= DDAR_DevAdd(res_mem0->start + MCDR1)
-				+ DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->codec		= data->codec;
+	mcp->dma_audio_rd	= DMA_Ser4MCP0Rd;
+	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
+	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
+	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
+	mcp->gpio_base		= data->gpio_base;
 
 	platform_set_drvdata(pdev, mcp);
 
+	if (machine_is_assabet()) {
+		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+	}
+
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
 	/*
 	 * Initialise device.  Note that we initially
 	 * set the sampling rate to minimum.
 	 */
-	priv->mccr0_base = ioremap(res_mem0->start, size0);
-	priv->mccr1_base = ioremap(res_mem1->start, size1);
-
-	__raw_writel(-1, priv->mccr0_base + MCSR);
-	priv->mccr1 = data->mccr1;
-	priv->mccr0 = data->mccr0 | 0x7f7f;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
-	__raw_writel(priv->mccr1, priv->mccr1_base + MCCR1);
+	Ser4MCSR = -1;
+	Ser4MCCR1 = data->mccr1;
+	Ser4MCCR0 = data->mccr0 | 0x7f7f;
 
 	/*
 	 * Calculate the read/write timeout (us) from the bit clock
@@ -237,53 +195,36 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
 	mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
 			  mcp->sclk_rate;
 
-	ret = mcp_host_register(mcp, data->codec_pdata);
+	ret = mcp_host_register(mcp);
 	if (ret == 0)
 		goto out;
 
- release2:
-	release_mem_region(res_mem1->start, size1);
  release:
-	release_mem_region(res_mem0->start, size0);
+	release_mem_region(0x80060000, 0x60);
 	platform_set_drvdata(pdev, NULL);
 
  out:
 	return ret;
 }
 
-static int mcp_sa11x0_remove(struct platform_device *pdev)
+static int mcp_sa11x0_remove(struct platform_device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(pdev);
-	struct mcp_sa11x0 *priv = priv(mcp);
-	struct resource *res_mem;
-	u32 size;
+	struct mcp *mcp = platform_get_drvdata(dev);
 
-	platform_set_drvdata(pdev, NULL);
+	platform_set_drvdata(dev, NULL);
 	mcp_host_unregister(mcp);
+	release_mem_region(0x80060000, 0x60);
 
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res_mem) {
-		size = res_mem->end - res_mem->start + 1;
-		release_mem_region(res_mem->start, size);
-	}
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (res_mem) {
-		size = res_mem->end - res_mem->start + 1;
-		release_mem_region(res_mem->start, size);
-	}
-	iounmap(priv->mccr0_base);
-	iounmap(priv->mccr1_base);
 	return 0;
 }
 
 static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct mcp *mcp = platform_get_drvdata(dev);
-	struct mcp_sa11x0 *priv = priv(mcp);
-	u32 mccr0;
 
-	mccr0 = priv->mccr0 & ~MCCR0_MCE;
-	__raw_writel(mccr0, priv->mccr0_base + MCCR0);
+	priv(mcp)->mccr0 = Ser4MCCR0;
+	priv(mcp)->mccr1 = Ser4MCCR1;
+	Ser4MCCR0 &= ~MCCR0_MCE;
 
 	return 0;
 }
@@ -291,10 +232,9 @@ static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
 static int mcp_sa11x0_resume(struct platform_device *dev)
 {
 	struct mcp *mcp = platform_get_drvdata(dev);
-	struct mcp_sa11x0 *priv = priv(mcp);
 
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
-	__raw_writel(priv->mccr1, priv->mccr1_base + MCCR1);
+	Ser4MCCR1 = priv(mcp)->mccr1;
+	Ser4MCCR0 = priv(mcp)->mccr0;
 
 	return 0;
 }
@@ -311,7 +251,6 @@ static struct platform_driver mcp_sa11x0_driver = {
 	.resume		= mcp_sa11x0_resume,
 	.driver		= {
 		.name	= "sa11x0-mcp",
-		.owner  = THIS_MODULE,
 	},
 };
 

drivers/mfd/ucb1x00-core.c

@@ -36,15 +36,6 @@ static DEFINE_MUTEX(ucb1x00_mutex);
 static LIST_HEAD(ucb1x00_drivers);
 static LIST_HEAD(ucb1x00_devices);
 
-static struct mcp_device_id ucb1x00_id[] = {
-	{ "ucb1x00", 0 },  /* auto-detection */
-	{ "ucb1200", UCB_ID_1200 },
-	{ "ucb1300", UCB_ID_1300 },
-	{ "tc35143", UCB_ID_TC35143 },
-	{ }
-};
-MODULE_DEVICE_TABLE(mcp, ucb1x00_id);
-
 /**
  *	ucb1x00_io_set_dir - set IO direction
  *	@ucb: UCB1x00 structure describing chip
@@ -157,16 +148,22 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 {
 	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
 	unsigned long flags;
+	unsigned old, mask = 1 << offset;
 
 	spin_lock_irqsave(&ucb->io_lock, flags);
-	ucb->io_dir |= (1 << offset);
-	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
-
+	old = ucb->io_out;
 	if (value)
-		ucb->io_out |= 1 << offset;
+		ucb->io_out |= mask;
 	else
-		ucb->io_out &= ~(1 << offset);
+		ucb->io_out &= ~mask;
+
+	if (old != ucb->io_out)
 		ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+
+	if (!(ucb->io_dir & mask)) {
+		ucb->io_dir |= mask;
+		ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+	}
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
@@ -536,33 +533,17 @@ static struct class ucb1x00_class = {
 
 static int ucb1x00_probe(struct mcp *mcp)
 {
-	const struct mcp_device_id *mid;
 	struct ucb1x00 *ucb;
 	struct ucb1x00_driver *drv;
-	struct ucb1x00_plat_data *pdata;
 	unsigned int id;
 	int ret = -ENODEV;
 	int temp;
 
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
-	mid = mcp_get_device_id(mcp);
 
-	if (mid && mid->driver_data) {
-		if (id != mid->driver_data) {
-			printk(KERN_WARNING "%s wrong ID %04x found: %04x\n",
-				mid->name, (unsigned int) mid->driver_data, id);
-			goto err_disable;
-		}
-	} else {
-		mid = &ucb1x00_id[1];
-		while (mid->driver_data) {
-			if (id == mid->driver_data)
-				break;
-			mid++;
-		}
-		printk(KERN_WARNING "%s ID not found: %04x\n",
-			ucb1x00_id[0].name, id);
+	if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
+		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
 		goto err_disable;
 	}
 
@@ -571,28 +552,28 @@ static int ucb1x00_probe(struct mcp *mcp)
 	if (!ucb)
 		goto err_disable;
 
-	pdata = mcp->attached_device.platform_data;
+
 	ucb->dev.class = &ucb1x00_class;
 	ucb->dev.parent = &mcp->attached_device;
-	dev_set_name(&ucb->dev, mid->name);
+	dev_set_name(&ucb->dev, "ucb1x00");
 
 	spin_lock_init(&ucb->lock);
 	spin_lock_init(&ucb->io_lock);
 	sema_init(&ucb->adc_sem, 1);
 
-	ucb->id  = mid;
+	ucb->id  = id;
 	ucb->mcp = mcp;
 	ucb->irq = ucb1x00_detect_irq(ucb);
 	if (ucb->irq == NO_IRQ) {
-		printk(KERN_ERR "%s: IRQ probe failed\n", mid->name);
+		printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
 		ret = -ENODEV;
 		goto err_free;
 	}
 
 	ucb->gpio.base = -1;
-	if (pdata && (pdata->gpio_base >= 0)) {
+	if (mcp->gpio_base != 0) {
 		ucb->gpio.label = dev_name(&ucb->dev);
-		ucb->gpio.base = pdata->gpio_base;
+		ucb->gpio.base = mcp->gpio_base;
 		ucb->gpio.ngpio = 10;
 		ucb->gpio.set = ucb1x00_gpio_set;
 		ucb->gpio.get = ucb1x00_gpio_get;
@@ -605,10 +586,10 @@ static int ucb1x00_probe(struct mcp *mcp)
 		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
 
 	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
-			  mid->name, ucb);
+			  "UCB1x00", ucb);
 	if (ret) {
-		printk(KERN_ERR "%s: unable to grab irq%d: %d\n",
-			mid->name, ucb->irq, ret);
+		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
+			ucb->irq, ret);
 		goto err_gpio;
 	}
 
@@ -712,6 +693,7 @@ static int ucb1x00_resume(struct mcp *mcp)
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct ucb1x00_dev *dev;
 
+	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
 	mutex_lock(&ucb1x00_mutex);
 	list_for_each_entry(dev, &ucb->devs, dev_node) {
@@ -730,7 +712,6 @@ static struct mcp_driver ucb1x00_driver = {
 	.remove		= ucb1x00_remove,
 	.suspend	= ucb1x00_suspend,
 	.resume		= ucb1x00_resume,
-	.id_table	= ucb1x00_id,
 };
 
 static int __init ucb1x00_init(void)

drivers/mfd/ucb1x00-ts.c

@@ -47,7 +47,6 @@ struct ucb1x00_ts {
 	u16			x_res;
 	u16			y_res;
 
-	unsigned int		restart:1;
 	unsigned int		adcsync:1;
 };
 
@@ -207,15 +206,17 @@ static int ucb1x00_thread(void *_ts)
 {
 	struct ucb1x00_ts *ts = _ts;
 	DECLARE_WAITQUEUE(wait, current);
+	bool frozen, ignore = false;
 	int valid = 0;
 
 	set_freezable();
 	add_wait_queue(&ts->irq_wait, &wait);
-	while (!kthread_should_stop()) {
+	while (!kthread_freezable_should_stop(&frozen)) {
 		unsigned int x, y, p;
 		signed long timeout;
 
-		ts->restart = 0;
+		if (frozen)
+			ignore = true;
 
 		ucb1x00_adc_enable(ts->ucb);
 
@@ -258,7 +259,7 @@ static int ucb1x00_thread(void *_ts)
 			 * space.  We therefore leave it to user space
 			 * to do any filtering they please.
 			 */
-			if (!ts->restart) {
+			if (!ignore) {
 				ucb1x00_ts_evt_add(ts, p, x, y);
 				valid = 1;
 			}
@@ -267,8 +268,6 @@ static int ucb1x00_thread(void *_ts)
 			timeout = HZ / 100;
 		}
 
-		try_to_freeze();
-
 		schedule_timeout(timeout);
 	}
 
@@ -340,26 +339,6 @@ static void ucb1x00_ts_close(struct input_dev *idev)
 	ucb1x00_disable(ts->ucb);
 }
 
-#ifdef CONFIG_PM
-static int ucb1x00_ts_resume(struct ucb1x00_dev *dev)
-{
-	struct ucb1x00_ts *ts = dev->priv;
-
-	if (ts->rtask != NULL) {
-		/*
-		 * Restart the TS thread to ensure the
-		 * TS interrupt mode is set up again
-		 * after sleep.
-		 */
-		ts->restart = 1;
-		wake_up(&ts->irq_wait);
-	}
-	return 0;
-}
-#else
-#define ucb1x00_ts_resume NULL
-#endif
-
 
 /*
  * Initialisation.
@@ -382,7 +361,7 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
 	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
 
 	idev->name       = "Touchscreen panel";
-	idev->id.product = ts->ucb->id->driver_data;
+	idev->id.product = ts->ucb->id;
 	idev->open       = ucb1x00_ts_open;
 	idev->close      = ucb1x00_ts_close;
 
@@ -425,7 +404,6 @@ static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
 static struct ucb1x00_driver ucb1x00_ts_driver = {
 	.add		= ucb1x00_ts_add,
 	.remove		= ucb1x00_ts_remove,
-	.resume		= ucb1x00_ts_resume,
 };
 
 static int __init ucb1x00_ts_init(void)

drivers/pcmcia/sa1111_generic.c

@@ -205,7 +205,8 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)
 
 	dev_set_drvdata(&dev->dev, NULL);
 
-	for (; next = s->next, s; s = next) {
+	for (; s; s = next) {
+		next = s->next;
 		soc_pcmcia_remove_one(&s->soc);
 		kfree(s);
 	}

drivers/rtc/Kconfig

@@ -774,7 +774,7 @@ config RTC_DRV_EP93XX
 
 config RTC_DRV_SA1100
 	tristate "SA11x0/PXA2xx"
-	depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
+	depends on ARCH_SA1100 || ARCH_PXA
 	help
 	  If you say Y here you will get access to the real time clock
 	  built into your SA11x0 or PXA2xx CPU.

drivers/rtc/rtc-sa1100.c

@@ -27,42 +27,34 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/string.h>
 #include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/io.h>
+#include <linux/bitops.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#ifdef CONFIG_ARCH_PXA
+#include <mach/regs-rtc.h>
+#endif
+
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
-#define RTC_FREQ		1024
-
-#define RCNR		0x00	/* RTC Count Register */
-#define RTAR		0x04	/* RTC Alarm Register */
-#define RTSR		0x08	/* RTC Status Register */
-#define RTTR		0x0c	/* RTC Timer Trim Register */
-
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-#define rtc_readl(sa1100_rtc, reg)	\
-	readl_relaxed((sa1100_rtc)->base + (reg))
-#define rtc_writel(sa1100_rtc, reg, value)	\
-	writel_relaxed((value), (sa1100_rtc)->base + (reg))
-
-struct sa1100_rtc {
-	struct resource		*ress;
-	void __iomem		*base;
-	struct clk		*clk;
-	int			irq_1Hz;
-	int			irq_Alrm;
-	struct rtc_device	*rtc;
-	spinlock_t		lock;		/* Protects this structure */
-};
+
+static const unsigned long RTC_FREQ = 1024;
+static struct rtc_time rtc_alarm;
+static DEFINE_SPINLOCK(sa1100_rtc_lock);
+
+static inline int rtc_periodic_alarm(struct rtc_time *tm)
+{
+	return  (tm->tm_year == -1) ||
+		((unsigned)tm->tm_mon >= 12) ||
+		((unsigned)(tm->tm_mday - 1) >= 31) ||
+		((unsigned)tm->tm_hour > 23) ||
+		((unsigned)tm->tm_min > 59) ||
+		((unsigned)tm->tm_sec > 59);
+}
+
 /*
  * Calculate the next alarm time given the requested alarm time mask
  * and the current time.
@@ -90,26 +82,46 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
 	}
 }
 
+static int rtc_update_alarm(struct rtc_time *alrm)
+{
+	struct rtc_time alarm_tm, now_tm;
+	unsigned long now, time;
+	int ret;
+
+	do {
+		now = RCNR;
+		rtc_time_to_tm(now, &now_tm);
+		rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
+		ret = rtc_tm_to_time(&alarm_tm, &time);
+		if (ret != 0)
+			break;
+
+		RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
+		RTAR = time;
+	} while (now != RCNR);
+
+	return ret;
+}
+
 static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = to_platform_device(dev_id);
-	struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
 	unsigned int rtsr;
 	unsigned long events = 0;
 
-	spin_lock(&sa1100_rtc->lock);
+	spin_lock(&sa1100_rtc_lock);
 
+	rtsr = RTSR;
 	/* clear interrupt sources */
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
-	rtc_writel(sa1100_rtc, RTSR, 0);
-
+	RTSR = 0;
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_probe(). */
 	if (rtsr & (RTSR_ALE | RTSR_HZE)) {
 		/* This is the original code, before there was the if test
 		 * above. This code does not clear interrupts that were not
 		 * enabled. */
-		rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2));
+		RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
 	} else {
 		/* For some reason, it is possible to enter this routine
 		 * without interruptions enabled, it has been tested with
@@ -118,13 +130,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 		 * This situation leads to an infinite "loop" of interrupt
 		 * routine calling and as a result the processor seems to
 		 * lock on its first call to open(). */
-		rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+		RTSR = RTSR_AL | RTSR_HZ;
 	}
 
 	/* clear alarm interrupt if it has occurred */
 	if (rtsr & RTSR_AL)
 		rtsr &= ~RTSR_ALE;
-	rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE));
+	RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
 
 	/* update irq data & counter */
 	if (rtsr & RTSR_AL)
@@ -132,100 +144,89 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 	if (rtsr & RTSR_HZ)
 		events |= RTC_UF | RTC_IRQF;
 
-	rtc_update_irq(sa1100_rtc->rtc, 1, events);
+	rtc_update_irq(rtc, 1, events);
+
+	if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
+		rtc_update_alarm(&rtc_alarm);
 
-	spin_unlock(&sa1100_rtc->lock);
+	spin_unlock(&sa1100_rtc_lock);
 
 	return IRQ_HANDLED;
 }
 
 static int sa1100_rtc_open(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
 	int ret;
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
 
-	ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt,
-				IRQF_DISABLED, "rtc 1Hz", dev);
+	ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
+		"rtc 1Hz", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz);
+		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
 		goto fail_ui;
 	}
-	ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt,
-				IRQF_DISABLED, "rtc Alrm", dev);
+	ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
+		"rtc Alrm", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm);
+		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
 		goto fail_ai;
 	}
-	sa1100_rtc->rtc->max_user_freq = RTC_FREQ;
-	rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ);
+	rtc->max_user_freq = RTC_FREQ;
+	rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
 
 	return 0;
 
  fail_ai:
-	free_irq(sa1100_rtc->irq_1Hz, dev);
+	free_irq(IRQ_RTC1Hz, dev);
  fail_ui:
 	return ret;
 }
 
 static void sa1100_rtc_release(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+	spin_lock_irq(&sa1100_rtc_lock);
+	RTSR = 0;
+	spin_unlock_irq(&sa1100_rtc_lock);
 
-	spin_lock_irq(&sa1100_rtc->lock);
-	rtc_writel(sa1100_rtc, RTSR, 0);
-	spin_unlock_irq(&sa1100_rtc->lock);
-
-	free_irq(sa1100_rtc->irq_Alrm, dev);
-	free_irq(sa1100_rtc->irq_1Hz, dev);
+	free_irq(IRQ_RTCAlrm, dev);
+	free_irq(IRQ_RTC1Hz, dev);
 }
 
 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-	unsigned int rtsr;
-
-	spin_lock_irq(&sa1100_rtc->lock);
-
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
+	spin_lock_irq(&sa1100_rtc_lock);
 	if (enabled)
-		rtsr |= RTSR_ALE;
+		RTSR |= RTSR_ALE;
 	else
-		rtsr &= ~RTSR_ALE;
-	rtc_writel(sa1100_rtc, RTSR, rtsr);
-
-	spin_unlock_irq(&sa1100_rtc->lock);
+		RTSR &= ~RTSR_ALE;
+	spin_unlock_irq(&sa1100_rtc_lock);
 	return 0;
 }
 
 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
-	rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm);
+	rtc_time_to_tm(RCNR, tm);
 	return 0;
 }
 
 static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
 	unsigned long time;
 	int ret;
 
 	ret = rtc_tm_to_time(tm, &time);
 	if (ret == 0)
-		rtc_writel(sa1100_rtc, RCNR, time);
+		RCNR = time;
 	return ret;
 }
 
 static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-	unsigned long time;
-	unsigned int rtsr;
+	u32	rtsr;
 
-	time = rtc_readl(sa1100_rtc, RCNR);
-	rtc_time_to_tm(time, &alrm->time);
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
+	memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
+	rtsr = RTSR;
 	alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
 	alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
 	return 0;
@@ -233,39 +234,26 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-	struct rtc_time now_tm, alarm_tm;
-	unsigned long time, alarm;
-	unsigned int rtsr;
-
-	spin_lock_irq(&sa1100_rtc->lock);
-
-	time = rtc_readl(sa1100_rtc, RCNR);
-	rtc_time_to_tm(time, &now_tm);
-	rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
-	rtc_tm_to_time(&alarm_tm, &alarm);
-	rtc_writel(sa1100_rtc, RTAR, alarm);
+	int ret;
 
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
+	spin_lock_irq(&sa1100_rtc_lock);
+	ret = rtc_update_alarm(&alrm->time);
+	if (ret == 0) {
 		if (alrm->enabled)
-		rtsr |= RTSR_ALE;
+			RTSR |= RTSR_ALE;
 		else
-		rtsr &= ~RTSR_ALE;
-	rtc_writel(sa1100_rtc, RTSR, rtsr);
-
-	spin_unlock_irq(&sa1100_rtc->lock);
+			RTSR &= ~RTSR_ALE;
+	}
+	spin_unlock_irq(&sa1100_rtc_lock);
 
-	return 0;
+	return ret;
 }
 
 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
+	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
 
-	seq_printf(seq, "trim/divider\t\t: 0x%08x\n",
-			rtc_readl(sa1100_rtc, RTTR));
-	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n",
-			rtc_readl(sa1100_rtc, RTSR));
 	return 0;
 }
 
@@ -282,51 +270,7 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 
 static int sa1100_rtc_probe(struct platform_device *pdev)
 {
-	struct sa1100_rtc *sa1100_rtc;
-	unsigned int rttr;
-	int ret;
-
-	sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
-	if (!sa1100_rtc)
-		return -ENOMEM;
-
-	spin_lock_init(&sa1100_rtc->lock);
-	platform_set_drvdata(pdev, sa1100_rtc);
-
-	ret = -ENXIO;
-	sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!sa1100_rtc->ress) {
-		dev_err(&pdev->dev, "No I/O memory resource defined\n");
-		goto err_ress;
-	}
-
-	sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0);
-	if (sa1100_rtc->irq_1Hz < 0) {
-		dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
-		goto err_ress;
-	}
-	sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1);
-	if (sa1100_rtc->irq_Alrm < 0) {
-		dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
-		goto err_ress;
-	}
-
-	ret = -ENOMEM;
-	sa1100_rtc->base = ioremap(sa1100_rtc->ress->start,
-				resource_size(sa1100_rtc->ress));
-	if (!sa1100_rtc->base) {
-		dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n");
-		goto err_map;
-	}
-
-	sa1100_rtc->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(sa1100_rtc->clk)) {
-		dev_err(&pdev->dev, "failed to find rtc clock source\n");
-		ret = PTR_ERR(sa1100_rtc->clk);
-		goto err_clk;
-	}
-	clk_prepare(sa1100_rtc->clk);
-	clk_enable(sa1100_rtc->clk);
+	struct rtc_device *rtc;
 
 	/*
 	 * According to the manual we should be able to let RTTR be zero
@@ -335,24 +279,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	 * If the clock divider is uninitialized then reset it to the
 	 * default value to get the 1Hz clock.
 	 */
-	if (rtc_readl(sa1100_rtc, RTTR) == 0) {
-		rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
-		rtc_writel(sa1100_rtc, RTTR, rttr);
-		dev_warn(&pdev->dev, "warning: initializing default clock"
-			 " divider/trim value\n");
+	if (RTTR == 0) {
+		RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+		dev_warn(&pdev->dev, "warning: "
+			"initializing default clock divider/trim value\n");
 		/* The current RTC value probably doesn't make sense either */
-		rtc_writel(sa1100_rtc, RCNR, 0);
+		RCNR = 0;
 	}
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
-						&sa1100_rtc_ops, THIS_MODULE);
-	if (IS_ERR(sa1100_rtc->rtc)) {
-		dev_err(&pdev->dev, "Failed to register RTC device -> %d\n",
-			ret);
-		goto err_rtc_reg;
-	}
+	rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
+		THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_interrupt().
 	 *
@@ -375,46 +319,33 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	 *
 	 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
 	 * the corresponding bits in RTSR. */
-	rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+	RTSR = RTSR_AL | RTSR_HZ;
 
 	return 0;
-
-err_rtc_reg:
-err_clk:
-	iounmap(sa1100_rtc->base);
-err_ress:
-err_map:
-	kfree(sa1100_rtc);
-	return ret;
 }
 
 static int sa1100_rtc_remove(struct platform_device *pdev)
 {
-	struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+	if (rtc)
+		rtc_device_unregister(rtc);
 
-	rtc_device_unregister(sa1100_rtc->rtc);
-	clk_disable(sa1100_rtc->clk);
-	clk_unprepare(sa1100_rtc->clk);
-	iounmap(sa1100_rtc->base);
 	return 0;
 }
 
 #ifdef CONFIG_PM
 static int sa1100_rtc_suspend(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
 	if (device_may_wakeup(dev))
-		enable_irq_wake(sa1100_rtc->irq_Alrm);
+		enable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
 
 static int sa1100_rtc_resume(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
 	if (device_may_wakeup(dev))
-		disable_irq_wake(sa1100_rtc->irq_Alrm);
+		disable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
 

include/linux/mfd/mcp.h

@@ -10,7 +10,6 @@
 #ifndef MCP_H
 #define MCP_H
 
-#include <linux/mod_devicetable.h>
 #include <mach/dma.h>
 
 struct mcp_ops;
@@ -27,7 +26,7 @@ struct mcp {
 	dma_device_t	dma_telco_rd;
 	dma_device_t	dma_telco_wr;
 	struct device	attached_device;
-	const char	*codec;
+	int		gpio_base;
 };
 
 struct mcp_ops {
@@ -45,11 +44,10 @@ void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
 unsigned int mcp_reg_read(struct mcp *, unsigned int);
 void mcp_enable(struct mcp *);
 void mcp_disable(struct mcp *);
-const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp);
 #define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
 
 struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *, void *);
+int mcp_host_register(struct mcp *);
 void mcp_host_unregister(struct mcp *);
 
 struct mcp_driver {
@@ -58,7 +56,6 @@ struct mcp_driver {
 	void (*remove)(struct mcp *);
 	int (*suspend)(struct mcp *, pm_message_t);
 	int (*resume)(struct mcp *);
-	const struct mcp_device_id *id_table;
 };
 
 int mcp_driver_register(struct mcp_driver *);
@@ -67,6 +64,9 @@ void mcp_driver_unregister(struct mcp_driver *);
 #define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
 #define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
 
-#define mcp_priv(mcp)		((void *)((mcp)+1))
+static inline void *mcp_priv(struct mcp *mcp)
+{
+	return mcp + 1;
+}
 
 #endif

include/linux/mfd/ucb1x00.h

@@ -104,9 +104,6 @@
 #define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
 #define UCB_MODE_AUD_OFF_CAN	(1 << 13)
 
-struct ucb1x00_plat_data {
-	int		gpio_base;
-};
 
 struct ucb1x00_irq {
 	void *devid;
@@ -119,7 +116,7 @@ struct ucb1x00 {
 	unsigned int		irq;
 	struct semaphore	adc_sem;
 	spinlock_t		io_lock;
-	const struct mcp_device_id *id;
+	u16			id;
 	u16			io_dir;
 	u16			io_out;
 	u16			adc_cr;

include/linux/mod_devicetable.h

@@ -436,17 +436,6 @@ struct spi_device_id {
 			__attribute__((aligned(sizeof(kernel_ulong_t))));
 };
 
-/* mcp */
-
-#define MCP_NAME_SIZE	20
-#define MCP_MODULE_PREFIX "mcp:"
-
-struct mcp_device_id {
-	char name[MCP_NAME_SIZE];
-	kernel_ulong_t driver_data	/* Data private to the driver */
-			__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
 /* dmi */
 enum dmi_field {
 	DMI_NONE,

scripts/mod/file2alias.c

@@ -823,16 +823,6 @@ static int do_spi_entry(const char *filename, struct spi_device_id *id,
 }
 ADD_TO_DEVTABLE("spi", struct spi_device_id, do_spi_entry);
 
-/* Looks like: mcp:S */
-static int do_mcp_entry(const char *filename, struct mcp_device_id *id,
-			char *alias)
-{
-	sprintf(alias, MCP_MODULE_PREFIX "%s", id->name);
-
-	return 1;
-}
-ADD_TO_DEVTABLE("mcp", struct mcp_device_id, do_mcp_entry); 
-
 static const struct dmifield {
 	const char *prefix;
 	int field;