i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

The register definitions are only used in the driver itself.
This also removes the last dependency on plat/ includes from the
i2c driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -56,7 +56,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 
 #include "common.h"

arch/arm/plat-samsung/devs.c

@@ -62,7 +62,6 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>

arch/arm/plat-samsung/include/plat/regs-iic.h

-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */

drivers/i2c/busses/i2c-s3c2410.c

@@ -42,9 +42,48 @@
 
 #include <asm/irq.h>
 
-#include <plat/regs-iic.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICREG(x) (x)
+
+#define S3C2410_IICCON    S3C2410_IICREG(0x00)
+#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
+#define S3C2410_IICADD    S3C2410_IICREG(0x08)
+#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
+#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
+
+#define S3C2410_IICCON_ACKEN		(1<<7)
+#define S3C2410_IICCON_TXDIV_16		(0<<6)
+#define S3C2410_IICCON_TXDIV_512	(1<<6)
+#define S3C2410_IICCON_IRQEN		(1<<5)
+#define S3C2410_IICCON_IRQPEND		(1<<4)
+#define S3C2410_IICCON_SCALE(x)		((x)&15)
+#define S3C2410_IICCON_SCALEMASK	(0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
+#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
+#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
+#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
+#define S3C2410_IICSTAT_MODEMASK	(3<<6)
+
+#define S3C2410_IICSTAT_START		(1<<5)
+#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
+#define S3C2410_IICSTAT_TXRXEN		(1<<4)
+#define S3C2410_IICSTAT_ARBITR		(1<<3)
+#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
+#define S3C2410_IICSTAT_ADDR0		(1<<1)
+#define S3C2410_IICSTAT_LASTBIT		(1<<0)
+
+#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON		(1<<2)
+
 /* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
 #define QUIRK_S3C2440		(1 << 0)
 #define QUIRK_HDMIPHY		(1 << 1)