Commit e7d162fa authored by Guenter Roeck's avatar Guenter Roeck Committed by Wim Van Sebroeck

watchdog: diag288: Stop re-using watchdog core internal flags

A watchdog driver should not use watchdog subsystem internal flags.
Use a driver variable and flag instead to maintain the watchdog state
and to determine if a suspend operation is possible or not.
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent 32ecc639
...@@ -106,6 +106,10 @@ static int __diag288_lpar(unsigned int func, unsigned int timeout, ...@@ -106,6 +106,10 @@ static int __diag288_lpar(unsigned int func, unsigned int timeout,
return __diag288(func, timeout, action, 0); return __diag288(func, timeout, action, 0);
} }
static unsigned long wdt_status;
#define DIAG_WDOG_BUSY 0
static int wdt_start(struct watchdog_device *dev) static int wdt_start(struct watchdog_device *dev)
{ {
char *ebc_cmd; char *ebc_cmd;
...@@ -113,12 +117,17 @@ static int wdt_start(struct watchdog_device *dev) ...@@ -113,12 +117,17 @@ static int wdt_start(struct watchdog_device *dev)
int ret; int ret;
unsigned int func; unsigned int func;
if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status))
return -EBUSY;
ret = -ENODEV; ret = -ENODEV;
if (MACHINE_IS_VM) { if (MACHINE_IS_VM) {
ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL); ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL);
if (!ebc_cmd) if (!ebc_cmd) {
clear_bit(DIAG_WDOG_BUSY, &wdt_status);
return -ENOMEM; return -ENOMEM;
}
len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN); len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN);
ASCEBC(ebc_cmd, MAX_CMDLEN); ASCEBC(ebc_cmd, MAX_CMDLEN);
EBC_TOUPPER(ebc_cmd, MAX_CMDLEN); EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
...@@ -135,6 +144,7 @@ static int wdt_start(struct watchdog_device *dev) ...@@ -135,6 +144,7 @@ static int wdt_start(struct watchdog_device *dev)
if (ret) { if (ret) {
pr_err("The watchdog cannot be activated\n"); pr_err("The watchdog cannot be activated\n");
clear_bit(DIAG_WDOG_BUSY, &wdt_status);
return ret; return ret;
} }
return 0; return 0;
...@@ -146,6 +156,9 @@ static int wdt_stop(struct watchdog_device *dev) ...@@ -146,6 +156,9 @@ static int wdt_stop(struct watchdog_device *dev)
diag_stat_inc(DIAG_STAT_X288); diag_stat_inc(DIAG_STAT_X288);
ret = __diag288(WDT_FUNC_CANCEL, 0, 0, 0); ret = __diag288(WDT_FUNC_CANCEL, 0, 0, 0);
clear_bit(DIAG_WDOG_BUSY, &wdt_status);
return ret; return ret;
} }
...@@ -220,17 +233,10 @@ static struct watchdog_device wdt_dev = { ...@@ -220,17 +233,10 @@ static struct watchdog_device wdt_dev = {
* It makes no sense to go into suspend while the watchdog is running. * It makes no sense to go into suspend while the watchdog is running.
* Depending on the memory size, the watchdog might trigger, while we * Depending on the memory size, the watchdog might trigger, while we
* are still saving the memory. * are still saving the memory.
* We reuse the open flag to ensure that suspend and watchdog open are
* exclusive operations
*/ */
static int wdt_suspend(void) static int wdt_suspend(void)
{ {
if (test_and_set_bit(WDOG_DEV_OPEN, &wdt_dev.status)) { if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status)) {
pr_err("Linux cannot be suspended while the watchdog is in use\n");
return notifier_from_errno(-EBUSY);
}
if (test_bit(WDOG_ACTIVE, &wdt_dev.status)) {
clear_bit(WDOG_DEV_OPEN, &wdt_dev.status);
pr_err("Linux cannot be suspended while the watchdog is in use\n"); pr_err("Linux cannot be suspended while the watchdog is in use\n");
return notifier_from_errno(-EBUSY); return notifier_from_errno(-EBUSY);
} }
...@@ -239,7 +245,7 @@ static int wdt_suspend(void) ...@@ -239,7 +245,7 @@ static int wdt_suspend(void)
static int wdt_resume(void) static int wdt_resume(void)
{ {
clear_bit(WDOG_DEV_OPEN, &wdt_dev.status); clear_bit(DIAG_WDOG_BUSY, &wdt_status);
return NOTIFY_DONE; return NOTIFY_DONE;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment