Merge branches 'consolidate', 'ep93xx', 'fixes', 'misc', 'mmci', 'remove' and...

Merge branches 'consolidate', 'ep93xx', 'fixes', 'misc', 'mmci', 'remove' and 'spear' into for-linus

arch/arm/Kconfig

@@ -197,15 +197,21 @@ config ARM_PATCH_PHYS_VIRT
 	depends on !XIP_KERNEL && MMU
 	depends on !ARCH_REALVIEW || !SPARSEMEM
 	help
-	  Patch phys-to-virt translation functions at runtime according to
-	  the position of the kernel in system memory.
+	  Patch phys-to-virt and virt-to-phys translation functions at
+	  boot and module load time according to the position of the
+	  kernel in system memory.
 
-	  This can only be used with non-XIP with MMU kernels where
-	  the base of physical memory is at a 16MB boundary.
+	  This can only be used with non-XIP MMU kernels where the base
+	  of physical memory is at a 16MB boundary, or theoretically 64K
+	  for the MSM machine class.
 
 config ARM_PATCH_PHYS_VIRT_16BIT
 	def_bool y
 	depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+	help
+	  This option extends the physical to virtual translation patching
+	  to allow physical memory down to a theoretical minimum of 64K
+	  boundaries.
 
 source "init/Kconfig"
 
@@ -550,18 +556,6 @@ config ARCH_KS8695
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
 
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
 	select CPU_ARM926T
@@ -954,8 +948,6 @@ source "arch/arm/mach-netx/Kconfig"
 source "arch/arm/mach-nomadik/Kconfig"
 source "arch/arm/plat-nomadik/Kconfig"
 
-source "arch/arm/mach-ns9xxx/Kconfig"
-
 source "arch/arm/mach-nuc93x/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
@@ -1321,8 +1313,7 @@ menu "Kernel Features"
 source "kernel/time/Kconfig"
 
 config SMP
-	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
@@ -1524,8 +1515,8 @@ config ARCH_SELECT_MEMORY_MODEL
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
-	bool "High Memory Support (EXPERIMENTAL)"
-	depends on MMU && EXPERIMENTAL
+	bool "High Memory Support"
+	depends on MMU
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1745,16 +1736,31 @@ config CMDLINE
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
+choice
+	prompt "Kernel command line type" if CMDLINE != ""
+	default CMDLINE_FROM_BOOTLOADER
+
+config CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader. If
+	  the boot loader doesn't provide any, the default kernel command
+	  string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  The command-line arguments provided by the boot loader will be
+	  appended to the default kernel command string.
+
 config CMDLINE_FORCE
 	bool "Always use the default kernel command string"
-	depends on CMDLINE != ""
 	help
 	  Always use the default kernel command string, even if the boot
 	  loader passes other arguments to the kernel.
 	  This is useful if you cannot or don't want to change the
 	  command-line options your boot loader passes to the kernel.
-
-	  If unsure, say N.
+endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
@@ -2013,7 +2019,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+	depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y

arch/arm/Makefile

@@ -164,7 +164,6 @@ machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
-machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
 machine-$(CONFIG_ARCH_OMAP3)		:= omap2

arch/arm/boot/compressed/head.S

@@ -459,7 +459,11 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		orr	r1, r1, #3 << 10
 		add	r2, r3, #16384
 1:		cmp	r1, r9			@ if virt > start of RAM
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		orrhs	r1, r1, #0x08		@ set cacheable
+#else
 		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
+#endif
 		cmp	r1, r10			@ if virt > end of RAM
 		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
 		str	r1, [r0], #4		@ 1:1 mapping
@@ -484,6 +488,12 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+__arm926ejs_mmu_cache_on:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		mov	r0, #4			@ put dcache in WT mode
+		mcr	p15, 7, r0, c15, c0, 0
+#endif
+
 __armv4_mmu_cache_on:
 		mov	r12, lr
 #ifdef CONFIG_MMU
@@ -665,6 +675,12 @@ proc_types:
 		W(b)	__armv4_mpu_cache_off
 		W(b)	__armv4_mpu_cache_flush
 
+		.word	0x41069260		@ ARM926EJ-S (v5TEJ)
+		.word	0xff0ffff0
+		b	__arm926ejs_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv5tej_mmu_cache_flush
+
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr

arch/arm/configs/ns9xxx_defconfig

-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_CC9P9360DEV=y
-CONFIG_MACH_CC9P9360JS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_MTD=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_PHYSMAP=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_GPIO=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
-CONFIG_EXT2_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y

arch/arm/configs/spear310_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_MACH_SPEAR310=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear320_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_MACH_SPEAR320=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear300_defconfig → arch/arm/configs/spear3xx_defconfig

@@ -7,6 +7,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PLAT_SPEAR=y
+CONFIG_BOARD_SPEAR300_EVB=y
+CONFIG_BOARD_SPEAR310_EVB=y
+CONFIG_BOARD_SPEAR320_EVB=y
 CONFIG_BINFMT_MISC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
@@ -24,7 +27,6 @@ CONFIG_MAX_RAW_DEVS=8192
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y

arch/arm/configs/spear600_defconfig → arch/arm/configs/spear6xx_defconfig

@@ -8,6 +8,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
+CONFIG_BOARD_SPEAR600_EVB=y
 CONFIG_BINFMT_MISC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
@@ -22,7 +23,6 @@ CONFIG_MAX_RAW_DEVS=8192
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y

arch/arm/include/asm/elf.h

@@ -108,6 +108,7 @@ struct task_struct;
 int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
 #define ELF_CORE_COPY_TASK_REGS dump_task_regs
 
+#define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	4096
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical

arch/arm/include/asm/futex.h

@@ -3,16 +3,74 @@
 
 #ifdef __KERNEL__
 
+#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP)
+/* ARM doesn't provide unprivileged exclusive memory accessors */
+#include <asm-generic/futex.h>
+#else
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_ex_table(err_reg)			\
+	"3:\n"							\
+	"	.pushsection __ex_table,\"a\"\n"		\
+	"	.align	3\n"					\
+	"	.long	1b, 4f, 2b, 4f\n"			\
+	"	.popsection\n"					\
+	"	.pushsection .fixup,\"ax\"\n"			\
+	"4:	mov	%0, " err_reg "\n"			\
+	"	b	3b\n"					\
+	"	.popsection"
+
 #ifdef CONFIG_SMP
 
-#include <asm-generic/futex.h>
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+	smp_mb();						\
+	__asm__ __volatile__(					\
+	"1:	ldrex	%1, [%2]\n"				\
+	"	" insn "\n"					\
+	"2:	strex	%1, %0, [%2]\n"				\
+	"	teq	%1, #0\n"				\
+	"	bne	1b\n"					\
+	"	mov	%0, #0\n"				\
+	__futex_atomic_ex_table("%4")				\
+	: "=&r" (ret), "=&r" (oldval)				\
+	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
+	: "cc", "memory")
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret;
+	u32 val;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	smp_mb();
+	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
+	"1:	ldrex	%1, [%4]\n"
+	"	teq	%1, %2\n"
+	"	ite	eq	@ explicit IT needed for the 2b label\n"
+	"2:	strexeq	%0, %3, [%4]\n"
+	"	movne	%0, #0\n"
+	"	teq	%0, #0\n"
+	"	bne	1b\n"
+	__futex_atomic_ex_table("%5")
+	: "=&r" (ret), "=&r" (val)
+	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
+	: "cc", "memory");
+	smp_mb();
+
+	*uval = val;
+	return ret;
+}
 
 #else /* !SMP, we can work around lack of atomic ops by disabling preemption */
 
-#include <linux/futex.h>
 #include <linux/preempt.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
 #include <asm/domain.h>
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
@@ -21,19 +79,37 @@
 	"	" insn "\n"					\
 	"2:	" T(str) "	%0, [%2]\n"			\
 	"	mov	%0, #0\n"				\
-	"3:\n"							\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 4f, 2b, 4f\n"			\
-	"	.popsection\n"					\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"4:	mov	%0, %4\n"				\
-	"	b	3b\n"					\
-	"	.popsection"					\
+	__futex_atomic_ex_table("%4")				\
 	: "=&r" (ret), "=&r" (oldval)				\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret = 0;
+	u32 val;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
+	"1:	" T(ldr) "	%1, [%4]\n"
+	"	teq	%1, %2\n"
+	"	it	eq	@ explicit IT needed for the 2b label\n"
+	"2:	" T(streq) "	%3, [%4]\n"
+	__futex_atomic_ex_table("%5")
+	: "+r" (ret), "=&r" (val)
+	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
+	: "cc", "memory");
+
+	*uval = val;
+	return ret;
+}
+
+#endif /* !SMP */
+
 static inline int
 futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 {
@@ -87,39 +163,6 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	return ret;
 }
 
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
-			      u32 oldval, u32 newval)
-{
-	int ret = 0;
-	u32 val;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	" T(ldr) "	%1, [%4]\n"
-	"	teq	%1, %2\n"
-	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	" T(streq) "	%3, [%4]\n"
-	"3:\n"
-	"	.pushsection __ex_table,\"a\"\n"
-	"	.align	3\n"
-	"	.long	1b, 4f, 2b, 4f\n"
-	"	.popsection\n"
-	"	.pushsection .fixup,\"ax\"\n"
-	"4:	mov	%0, %5\n"
-	"	b	3b\n"
-	"	.popsection"
-	: "+r" (ret), "=&r" (val)
-	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
-	: "cc", "memory");
-
-	*uval = val;
-	return ret;
-}
-
-#endif /* !SMP */
-
+#endif /* !(CPU_USE_DOMAINS && SMP) */
 #endif /* __KERNEL__ */
 #endif /* _ASM_ARM_FUTEX_H */

arch/arm/include/asm/ptrace.h

@@ -128,6 +128,12 @@ struct pt_regs {
 #define ARM_r0		uregs[0]
 #define ARM_ORIG_r0	uregs[17]
 
+/*
+ * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
+ * and core dumps.
+ */
+#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
+
 #ifdef __KERNEL__
 
 #define user_mode(regs)	\

arch/arm/include/asm/spinlock.h

@@ -5,6 +5,8 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
+#include <asm/processor.h>
+
 /*
  * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
  * extensions, so when running on UP, we have to patch these instructions away.

arch/arm/kernel/perf_event.c

@@ -560,11 +560,6 @@ static int armpmu_event_init(struct perf_event *event)
 	event->destroy = hw_perf_event_destroy;
 
 	if (!atomic_inc_not_zero(&active_events)) {
-		if (atomic_read(&active_events) > armpmu->num_events) {
-			atomic_dec(&active_events);
-			return -ENOSPC;
-		}
-
 		mutex_lock(&pmu_reserve_mutex);
 		if (atomic_read(&active_events) == 0) {
 			err = armpmu_reserve_hardware();

arch/arm/kernel/ptrace.c

@@ -21,6 +21,7 @@
 #include <linux/uaccess.h>
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
+#include <linux/regset.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -308,58 +309,6 @@ static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
 	return put_user_reg(tsk, off >> 2, val);
 }
 
-/*
- * Get all user integer registers.
- */
-static int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs *regs = task_pt_regs(tsk);
-
-	return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-}
-
-/*
- * Set all user integer registers.
- */
-static int ptrace_setregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs newregs;
-	int ret;
-
-	ret = -EFAULT;
-	if (copy_from_user(&newregs, uregs, sizeof(struct pt_regs)) == 0) {
-		struct pt_regs *regs = task_pt_regs(tsk);
-
-		ret = -EINVAL;
-		if (valid_user_regs(&newregs)) {
-			*regs = newregs;
-			ret = 0;
-		}
-	}
-
-	return ret;
-}
-
-/*
- * Get the child FPU state.
- */
-static int ptrace_getfpregs(struct task_struct *tsk, void __user *ufp)
-{
-	return copy_to_user(ufp, &task_thread_info(tsk)->fpstate,
-			    sizeof(struct user_fp)) ? -EFAULT : 0;
-}
-
-/*
- * Set the child FPU state.
- */
-static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-	thread->used_cp[1] = thread->used_cp[2] = 1;
-	return copy_from_user(&thread->fpstate, ufp,
-			      sizeof(struct user_fp)) ? -EFAULT : 0;
-}
-
 #ifdef CONFIG_IWMMXT
 
 /*
@@ -418,56 +367,6 @@ static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp)
 }
 #endif
 
-#ifdef CONFIG_VFP
-/*
- * Get the child VFP state.
- */
-static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-	union vfp_state *vfp = &thread->vfpstate;
-	struct user_vfp __user *ufp = data;
-
-	vfp_sync_hwstate(thread);
-
-	/* copy the floating point registers */
-	if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
-			 sizeof(vfp->hard.fpregs)))
-		return -EFAULT;
-
-	/* copy the status and control register */
-	if (put_user(vfp->hard.fpscr, &ufp->fpscr))
-		return -EFAULT;
-
-	return 0;
-}
-
-/*
- * Set the child VFP state.
- */
-static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-	union vfp_state *vfp = &thread->vfpstate;
-	struct user_vfp __user *ufp = data;
-
-	vfp_sync_hwstate(thread);
-
-	/* copy the floating point registers */
-	if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
-			   sizeof(vfp->hard.fpregs)))
-		return -EFAULT;
-
-	/* copy the status and control register */
-	if (get_user(vfp->hard.fpscr, &ufp->fpscr))
-		return -EFAULT;
-
-	vfp_flush_hwstate(thread);
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 /*
  * Convert a virtual register number into an index for a thread_info
@@ -694,6 +593,219 @@ static int ptrace_sethbpregs(struct task_struct *tsk, long num,
 }
 #endif
 
+/* regset get/set implementations */
+
+static int gpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   regs,
+				   0, sizeof(*regs));
+}
+
+static int gpr_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct pt_regs newregs;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &newregs,
+				 0, sizeof(newregs));
+	if (ret)
+		return ret;
+
+	if (!valid_user_regs(&newregs))
+		return -EINVAL;
+
+	*task_pt_regs(target) = newregs;
+	return 0;
+}
+
+static int fpa_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &task_thread_info(target)->fpstate,
+				   0, sizeof(struct user_fp));
+}
+
+static int fpa_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	struct thread_info *thread = task_thread_info(target);
+
+	thread->used_cp[1] = thread->used_cp[2] = 1;
+
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+		&thread->fpstate,
+		0, sizeof(struct user_fp));
+}
+
+#ifdef CONFIG_VFP
+/*
+ * VFP register get/set implementations.
+ *
+ * With respect to the kernel, struct user_fp is divided into three chunks:
+ * 16 or 32 real VFP registers (d0-d15 or d0-31)
+ *	These are transferred to/from the real registers in the task's
+ *	vfp_hard_struct.  The number of registers depends on the kernel
+ *	configuration.
+ *
+ * 16 or 0 fake VFP registers (d16-d31 or empty)
+ *	i.e., the user_vfp structure has space for 32 registers even if
+ *	the kernel doesn't have them all.
+ *
+ *	vfp_get() reads this chunk as zero where applicable
+ *	vfp_set() ignores this chunk
+ *
+ * 1 word for the FPSCR
+ *
+ * The bounds-checking logic built into user_regset_copyout and friends
+ * means that we can make a simple sequence of calls to map the relevant data
+ * to/from the specified slice of the user regset structure.
+ */
+static int vfp_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	int ret;
+	struct thread_info *thread = task_thread_info(target);
+	struct vfp_hard_struct const *vfp = &thread->vfpstate.hard;
+	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
+	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+
+	vfp_sync_hwstate(thread);
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &vfp->fpregs,
+				  user_fpregs_offset,
+				  user_fpregs_offset + sizeof(vfp->fpregs));
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+				       user_fpregs_offset + sizeof(vfp->fpregs),
+				       user_fpscr_offset);
+	if (ret)
+		return ret;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &vfp->fpscr,
+				   user_fpscr_offset,
+				   user_fpscr_offset + sizeof(vfp->fpscr));
+}
+
+/*
+ * For vfp_set() a read-modify-write is done on the VFP registers,
+ * in order to avoid writing back a half-modified set of registers on
+ * failure.
+ */
+static int vfp_set(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct thread_info *thread = task_thread_info(target);
+	struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
+	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &new_vfp.fpregs,
+				  user_fpregs_offset,
+				  user_fpregs_offset + sizeof(new_vfp.fpregs));
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+				user_fpregs_offset + sizeof(new_vfp.fpregs),
+				user_fpscr_offset);
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &new_vfp.fpscr,
+				 user_fpscr_offset,
+				 user_fpscr_offset + sizeof(new_vfp.fpscr));
+	if (ret)
+		return ret;
+
+	vfp_sync_hwstate(thread);
+	thread->vfpstate.hard = new_vfp;
+	vfp_flush_hwstate(thread);
+
+	return 0;
+}
+#endif /* CONFIG_VFP */
+
+enum arm_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+#ifdef CONFIG_VFP
+	REGSET_VFP,
+#endif
+};
+
+static const struct user_regset arm_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = ELF_NGREG,
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = gpr_get,
+		.set = gpr_set
+	},
+	[REGSET_FPR] = {
+		/*
+		 * For the FPA regs in fpstate, the real fields are a mixture
+		 * of sizes, so pretend that the registers are word-sized:
+		 */
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(struct user_fp) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = fpa_get,
+		.set = fpa_set
+	},
+#ifdef CONFIG_VFP
+	[REGSET_VFP] = {
+		/*
+		 * Pretend that the VFP regs are word-sized, since the FPSCR is
+		 * a single word dangling at the end of struct user_vfp:
+		 */
+		.core_note_type = NT_ARM_VFP,
+		.n = ARM_VFPREGS_SIZE / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = vfp_get,
+		.set = vfp_set
+	},
+#endif /* CONFIG_VFP */
+};
+
+static const struct user_regset_view user_arm_view = {
+	.name = "arm", .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
+	.regsets = arm_regsets, .n = ARRAY_SIZE(arm_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_arm_view;
+}
+
 long arch_ptrace(struct task_struct *child, long request,
 		 unsigned long addr, unsigned long data)
 {
@@ -710,19 +822,31 @@ long arch_ptrace(struct task_struct *child, long request,
 			break;
 
 		case PTRACE_GETREGS:
-			ret = ptrace_getregs(child, datap);
+			ret = copy_regset_to_user(child,
+						  &user_arm_view, REGSET_GPR,
+						  0, sizeof(struct pt_regs),
+						  datap);
 			break;
 
 		case PTRACE_SETREGS:
-			ret = ptrace_setregs(child, datap);
+			ret = copy_regset_from_user(child,
+						    &user_arm_view, REGSET_GPR,
+						    0, sizeof(struct pt_regs),
+						    datap);
 			break;
 
 		case PTRACE_GETFPREGS:
-			ret = ptrace_getfpregs(child, datap);
+			ret = copy_regset_to_user(child,
+						  &user_arm_view, REGSET_FPR,
+						  0, sizeof(union fp_state),
+						  datap);
 			break;
-		
+
 		case PTRACE_SETFPREGS:
-			ret = ptrace_setfpregs(child, datap);
+			ret = copy_regset_from_user(child,
+						    &user_arm_view, REGSET_FPR,
+						    0, sizeof(union fp_state),
+						    datap);
 			break;
 
 #ifdef CONFIG_IWMMXT
@@ -757,11 +881,17 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_VFP
 		case PTRACE_GETVFPREGS:
-			ret = ptrace_getvfpregs(child, datap);
+			ret = copy_regset_to_user(child,
+						  &user_arm_view, REGSET_VFP,
+						  0, ARM_VFPREGS_SIZE,
+						  datap);
 			break;
 
 		case PTRACE_SETVFPREGS:
-			ret = ptrace_setvfpregs(child, datap);
+			ret = copy_regset_from_user(child,
+						    &user_arm_view, REGSET_VFP,
+						    0, ARM_VFPREGS_SIZE,
+						    datap);
 			break;
 #endif
 

arch/arm/kernel/setup.c

@@ -672,11 +672,16 @@ __tagtable(ATAG_REVISION, parse_tag_revision);
 
 static int __init parse_tag_cmdline(const struct tag *tag)
 {
-#ifndef CONFIG_CMDLINE_FORCE
-	strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
-#else
+#if defined(CONFIG_CMDLINE_EXTEND)
+	strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
+	strlcat(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#elif defined(CONFIG_CMDLINE_FORCE)
 	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
-#endif /* CONFIG_CMDLINE_FORCE */
+#else
+	strlcpy(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#endif
 	return 0;
 }
 

arch/arm/mach-ep93xx/gpio.c

@@ -356,29 +356,6 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
 	return 0;
 }
 
-static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	u8 data_reg, data_dir_reg;
-	int gpio, i;
-
-	data_reg = __raw_readb(ep93xx_chip->data_reg);
-	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
-
-	gpio = ep93xx_chip->chip.base;
-	for (i = 0; i < chip->ngpio; i++, gpio++) {
-		int is_out = data_dir_reg & (1 << i);
-		int irq = gpio_to_irq(gpio);
-
-		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s %s\n",
-				chip->label, i, gpio,
-				gpiochip_is_requested(chip, i) ? : "",
-				is_out ? "out" : "in ",
-				(data_reg & (1<<  i)) ? "hi" : "lo",
-				(!is_out && irq>= 0) ? "(interrupt)" : "");
-	}
-}
-
 #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
 	{								\
 		.chip = {						\
@@ -387,7 +364,6 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 			.direction_output = ep93xx_gpio_direction_output, \
 			.get		  = ep93xx_gpio_get,		\
 			.set		  = ep93xx_gpio_set,		\
-			.dbg_show	  = ep93xx_gpio_dbg_show,	\
 			.base		  = base_gpio,			\
 			.ngpio		  = 8,				\
 		},							\

arch/arm/mach-ns9xxx/Kconfig

-if ARCH_NS9XXX
-
-menu "NS9xxx Implementations"
-
-config NS9XXX_HAVE_SERIAL8250
-	bool
-
-config PROCESSOR_NS9360
-	bool
-
-config MODULE_CC9P9360
-	bool
-	select PROCESSOR_NS9360
-
-config BOARD_A9M9750DEV
-	select NS9XXX_HAVE_SERIAL8250
-	bool
-
-config BOARD_JSCC9P9360
-	bool
-
-config MACH_CC9P9360DEV
-	bool "ConnectCore 9P 9360 on an A9M9750 Devboard"
-	select MODULE_CC9P9360
-	select BOARD_A9M9750DEV
-	help
-	  Say Y here if you are using the Digi ConnectCore 9P 9360
-	  on an A9M9750 Development Board.
-
-config MACH_CC9P9360JS
-	bool "ConnectCore 9P 9360 on a JSCC9P9360 Devboard"
-	select MODULE_CC9P9360
-	select BOARD_JSCC9P9360
-	help
-	  Say Y here if you are using the Digi ConnectCore 9P 9360
-	  on an JSCC9P9360 Development Board.
-
-endmenu
-
-endif

arch/arm/mach-ns9xxx/Makefile

-obj-y := clock.o generic.o gpio.o irq.o
-
-obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
-obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o
-
-obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o
-
-obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
-obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o
-
-# platform devices
-obj-$(CONFIG_NS9XXX_HAVE_SERIAL8250) += plat-serial8250.o

arch/arm/mach-ns9xxx/Makefile.boot

-zreladdr-y := 0x8000
-params_phys-y := 0x100

arch/arm/mach-ns9xxx/board-a9m9750dev.c

-/*
- * arch/arm/mach-ns9xxx/board-a9m9750dev.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/gpio.h>
-
-#include <mach/board.h>
-#include <mach/processor-ns9360.h>
-#include <mach/regs-sys-ns9360.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-bbu.h>
-#include <mach/regs-board-a9m9750dev.h>
-
-#include "board-a9m9750dev.h"
-
-static struct map_desc board_a9m9750dev_io_desc[] __initdata = {
-	{ /* FPGA on CS0 */
-		.virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)),
-		.pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)),
-		.length = NS9XXX_CS0STAT_LENGTH,
-		.type = MT_DEVICE,
-	},
-};
-
-void __init board_a9m9750dev_map_io(void)
-{
-	iotable_init(board_a9m9750dev_io_desc,
-		     ARRAY_SIZE(board_a9m9750dev_io_desc));
-}
-
-static void a9m9750dev_fpga_ack_irq(struct irq_data *d)
-{
-	/* nothing */
-}
-
-static void a9m9750dev_fpga_mask_irq(struct irq_data *d)
-{
-	u8 ier;
-
-	ier = __raw_readb(FPGA_IER);
-
-	ier &= ~(1 << (d->irq - FPGA_IRQ(0)));
-
-	__raw_writeb(ier, FPGA_IER);
-}
-
-static void a9m9750dev_fpga_maskack_irq(struct irq_data *d)
-{
-	a9m9750dev_fpga_mask_irq(d);
-	a9m9750dev_fpga_ack_irq(d);
-}
-
-static void a9m9750dev_fpga_unmask_irq(struct irq_data *d)
-{
-	u8 ier;
-
-	ier = __raw_readb(FPGA_IER);
-
-	ier |= 1 << (d->irq - FPGA_IRQ(0));
-
-	__raw_writeb(ier, FPGA_IER);
-}
-
-static struct irq_chip a9m9750dev_fpga_chip = {
-	.irq_ack	= a9m9750dev_fpga_ack_irq,
-	.irq_mask	= a9m9750dev_fpga_mask_irq,
-	.irq_mask_ack	= a9m9750dev_fpga_maskack_irq,
-	.irq_unmask	= a9m9750dev_fpga_unmask_irq,
-};
-
-static void a9m9750dev_fpga_demux_handler(unsigned int irq,
-		struct irq_desc *desc)
-{
-	u8 stat = __raw_readb(FPGA_ISR);
-
-	desc->irq_data.chip->irq_mask_ack(&desc->irq_data);
-
-	while (stat != 0) {
-		int irqno = fls(stat) - 1;
-
-		stat &= ~(1 << irqno);
-
-		generic_handle_irq(FPGA_IRQ(irqno));
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-void __init board_a9m9750dev_init_irq(void)
-{
-	u32 eic;
-	int i;
-
-	if (gpio_request(11, "board a9m9750dev extirq2") == 0)
-		ns9360_gpio_configure(11, 0, 1);
-	else
-		printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n",
-				__func__);
-
-	for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
-		irq_set_chip_and_handler(i, &a9m9750dev_fpga_chip,
-					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	/* IRQ_NS9XXX_EXT2: level sensitive + active low */
-	eic = __raw_readl(SYS_EIC(2));
-	REGSET(eic, SYS_EIC, PLTY, AL);
-	REGSET(eic, SYS_EIC, LVEDG, LEVEL);
-	__raw_writel(eic, SYS_EIC(2));
-
-	irq_set_chained_handler(IRQ_NS9XXX_EXT2,
-				a9m9750dev_fpga_demux_handler);
-}
-
-void __init board_a9m9750dev_init_machine(void)
-{
-	u32 reg;
-
-	/* setup static CS0: memory base ... */
-	reg = __raw_readl(SYS_SMCSSMB(0));
-	REGSETIM(reg, SYS_SMCSSMB, CSxB, NS9XXX_CSxSTAT_PHYS(0) >> 12);
-	__raw_writel(reg, SYS_SMCSSMB(0));
-
-	/* ... and mask */
-	reg = __raw_readl(SYS_SMCSSMM(0));
-	REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
-	REGSET(reg, SYS_SMCSSMM, CSEx, EN);
-	__raw_writel(reg, SYS_SMCSSMM(0));
-
-	/* setup static CS0: memory configuration */
-	reg = __raw_readl(MEM_SMC(0));
-	REGSET(reg, MEM_SMC, PSMC, OFF);
-	REGSET(reg, MEM_SMC, BSMC, OFF);
-	REGSET(reg, MEM_SMC, EW, OFF);
-	REGSET(reg, MEM_SMC, PB, 1);
-	REGSET(reg, MEM_SMC, PC, AL);
-	REGSET(reg, MEM_SMC, PM, DIS);
-	REGSET(reg, MEM_SMC, MW, 8);
-	__raw_writel(reg, MEM_SMC(0));
-
-	/* setup static CS0: timing */
-	__raw_writel(0x2, MEM_SMWED(0));
-	__raw_writel(0x2, MEM_SMOED(0));
-	__raw_writel(0x6, MEM_SMRD(0));
-	__raw_writel(0x6, MEM_SMWD(0));
-}

arch/arm/mach-ns9xxx/board-a9m9750dev.h

-/*
- * arch/arm/mach-ns9xxx/board-a9m9750dev.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/init.h>
-
-void __init board_a9m9750dev_map_io(void);
-void __init board_a9m9750dev_init_machine(void);
-void __init board_a9m9750dev_init_irq(void);

arch/arm/mach-ns9xxx/board-jscc9p9360.c

-/*
- * arch/arm/mach-ns9xxx/board-jscc9p9360.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include "board-jscc9p9360.h"
-
-void __init board_jscc9p9360_init_machine(void)
-{
-	/* TODO: reserve GPIOs for push buttons, etc pp */
-}
-

arch/arm/mach-ns9xxx/board-jscc9p9360.h

-/*
- * arch/arm/mach-ns9xxx/board-jscc9p9360.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/init.h>
-
-void __init board_jscc9p9360_init_machine(void);

arch/arm/mach-ns9xxx/clock.c

-/*
- * arch/arm/mach-ns9xxx/clock.c
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/semaphore.h>
-
-#include "clock.h"
-
-static LIST_HEAD(clocks);
-static DEFINE_SPINLOCK(clk_lock);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *ret = NULL, *retgen = NULL;
-	unsigned long flags;
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0) {
-			if (p->id == idno) {
-				if (!try_module_get(p->owner))
-					continue;
-				ret = p;
-				break;
-			} else if (p->id == -1)
-				/* remember match with id == -1 in case there is
-				 * no clock for idno */
-				retgen = p;
-		}
-	}
-
-	if (!ret && retgen && try_module_get(retgen->owner))
-		ret = retgen;
-
-	if (ret)
-		++ret->refcount;
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return ret ? ret : ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-	--clk->refcount;
-}
-EXPORT_SYMBOL(clk_put);
-
-static int clk_enable_unlocked(struct clk *clk)
-{
-	int ret = 0;
-	if (clk->parent) {
-		ret = clk_enable_unlocked(clk->parent);
-		if (ret)
-			return ret;
-	}
-
-	if (clk->usage++ == 0 && clk->endisable)
-		ret = clk->endisable(clk, 1);
-
-	return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-
-	ret = clk_enable_unlocked(clk);
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void clk_disable_unlocked(struct clk *clk)
-{
-	if (--clk->usage == 0 && clk->endisable)
-		clk->endisable(clk, 0);
-
-	if (clk->parent)
-		clk_disable_unlocked(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-
-	clk_disable_unlocked(clk);
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	if (clk->rate)
-		return clk->rate;
-
-	if (clk->parent)
-		return clk_get_rate(clk->parent);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_register(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-
-	list_add(&clk->node, &clocks);
-
-	if (clk->parent)
-		++clk->parent->refcount;
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-
-int clk_unregister(struct clk *clk)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-
-	if (clk->usage || clk->refcount)
-		ret = -EBUSY;
-	else
-		list_del(&clk->node);
-
-	if (clk->parent)
-		--clk->parent->refcount;
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return ret;
-}
-
-#if defined CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int clk_debugfs_show(struct seq_file *s, void *null)
-{
-	unsigned long flags;
-	struct clk *p;
-
-	spin_lock_irqsave(&clk_lock, flags);
-
-	list_for_each_entry(p, &clocks, node)
-		seq_printf(s, "%s.%d: usage=%lu refcount=%lu rate=%lu\n",
-				p->name, p->id, p->usage, p->refcount,
-				p->usage ? clk_get_rate(p) : 0);
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-
-static int clk_debugfs_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, clk_debugfs_show, NULL);
-}
-
-static const struct file_operations clk_debugfs_operations = {
-	.open = clk_debugfs_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-static int __init clk_debugfs_init(void)
-{
-	struct dentry *dentry;
-
-	dentry = debugfs_create_file("clk", S_IFREG | S_IRUGO, NULL, NULL,
-			&clk_debugfs_operations);
-	return IS_ERR(dentry) ? PTR_ERR(dentry) : 0;
-}
-subsys_initcall(clk_debugfs_init);
-
-#endif /* if defined CONFIG_DEBUG_FS */

arch/arm/mach-ns9xxx/clock.h

-/*
- * arch/arm/mach-ns9xxx/clock.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __NS9XXX_CLOCK_H
-#define __NS9XXX_CLOCK_H
-
-#include <linux/list.h>
-
-struct clk {
-	struct module *owner;
-	const char *name;
-	int id;
-
-	struct clk *parent;
-
-	unsigned long rate;
-	int (*endisable)(struct clk *, int enable);
-	unsigned long (*get_rate)(struct clk *);
-
-	struct list_head node;
-	unsigned long refcount;
-	unsigned long usage;
-};
-
-int clk_register(struct clk *clk);
-int clk_unregister(struct clk *clk);
-
-#endif /* ifndef __NS9XXX_CLOCK_H */

arch/arm/mach-ns9xxx/generic.c

-/*
- * arch/arm/mach-ns9xxx/generic.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-
-#include "generic.h"
-
-void __init ns9xxx_init_machine(void)
-{
-}

arch/arm/mach-ns9xxx/generic.h

-/*
- * arch/arm/mach-ns9xxx/generic.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/time.h>
-#include <asm/mach/time.h>
-#include <linux/init.h>
-
-void __init ns9xxx_init_irq(void);
-void __init ns9xxx_init_machine(void);

arch/arm/mach-ns9xxx/gpio-ns9360.c

-/*
- * arch/arm/mach-ns9xxx/gpio-ns9360.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/bug.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <mach/regs-bbu.h>
-#include <mach/processor-ns9360.h>
-
-#include "gpio-ns9360.h"
-
-static inline int ns9360_valid_gpio(unsigned gpio)
-{
-	return gpio <= 72;
-}
-
-static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio)
-{
-	if (gpio < 56)
-		return BBU_GCONFb1(gpio / 8);
-	else
-		/*
-		 * this could be optimised away on
-		 * ns9750 only builds, but it isn't ...
-		 */
-		return BBU_GCONFb2((gpio - 56) / 8);
-}
-
-static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio)
-{
-	if (gpio < 32)
-		return BBU_GCTRL1;
-	else if (gpio < 64)
-		return BBU_GCTRL2;
-	else
-		/* this could be optimised away on ns9750 only builds */
-		return BBU_GCTRL3;
-}
-
-static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio)
-{
-	if (gpio < 32)
-		return BBU_GSTAT1;
-	else if (gpio < 64)
-		return BBU_GSTAT2;
-	else
-		/* this could be optimised away on ns9750 only builds */
-		return BBU_GSTAT3;
-}
-
-/*
- * each gpio can serve for 4 different purposes [0..3].  These are called
- * "functions" and passed in the parameter func.  Functions 0-2 are always some
- * special things, function 3 is GPIO.  If func == 3 dir specifies input or
- * output, and with inv you can enable an inverter (independent of func).
- */
-int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func)
-{
-	void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio);
-	u32 confval;
-
-	confval = __raw_readl(conf);
-	REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir);
-	REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv);
-	REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func);
-	__raw_writel(confval, conf);
-
-	return 0;
-}
-
-int ns9360_gpio_configure(unsigned gpio, int inv, int func)
-{
-	if (likely(ns9360_valid_gpio(gpio))) {
-		if (func == 3) {
-			printk(KERN_WARNING "use gpio_direction_input "
-					"or gpio_direction_output\n");
-			return -EINVAL;
-		} else
-			return __ns9360_gpio_configure(gpio, 0, inv, func);
-	} else
-		return -EINVAL;
-}
-EXPORT_SYMBOL(ns9360_gpio_configure);
-
-int ns9360_gpio_get_value(unsigned gpio)
-{
-	void __iomem *stat = ns9360_gpio_get_gstataddr(gpio);
-	int ret;
-
-	ret = 1 & (__raw_readl(stat) >> (gpio & 31));
-
-	return ret;
-}
-
-void ns9360_gpio_set_value(unsigned gpio, int value)
-{
-	void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio);
-	u32 ctrlval;
-
-	ctrlval = __raw_readl(ctrl);
-
-	if (value)
-		ctrlval |= 1 << (gpio & 31);
-	else
-		ctrlval &= ~(1 << (gpio & 31));
-
-	__raw_writel(ctrlval, ctrl);
-}

arch/arm/mach-ns9xxx/gpio-ns9360.h

-/*
- * arch/arm/mach-ns9xxx/gpio-ns9360.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func);
-int ns9360_gpio_get_value(unsigned gpio);
-void ns9360_gpio_set_value(unsigned gpio, int value);

arch/arm/mach-ns9xxx/gpio.c

-/*
- * arch/arm/mach-ns9xxx/gpio.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-
-#include <mach/gpio.h>
-#include <mach/processor.h>
-#include <mach/processor-ns9360.h>
-#include <asm/bug.h>
-#include <asm/types.h>
-
-#include "gpio-ns9360.h"
-
-#if defined(CONFIG_PROCESSOR_NS9360)
-#define GPIO_MAX 72
-#elif defined(CONFIG_PROCESSOR_NS9750)
-#define GPIO_MAX 49
-#endif
-
-/* protects BBU_GCONFx and BBU_GCTRLx */
-static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock);
-
-/* only access gpiores with atomic ops */
-static DECLARE_BITMAP(gpiores, GPIO_MAX + 1);
-
-static inline int ns9xxx_valid_gpio(unsigned gpio)
-{
-#if defined(CONFIG_PROCESSOR_NS9360)
-	if (processor_is_ns9360())
-		return gpio <= 72;
-	else
-#endif
-#if defined(CONFIG_PROCESSOR_NS9750)
-	if (processor_is_ns9750())
-		return gpio <= 49;
-	else
-#endif
-	{
-		BUG();
-		return 0;
-	}
-}
-
-int gpio_request(unsigned gpio, const char *label)
-{
-	if (likely(ns9xxx_valid_gpio(gpio)))
-		return test_and_set_bit(gpio, gpiores) ? -EBUSY : 0;
-	else
-		return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
-	might_sleep();
-	clear_bit(gpio, gpiores);
-	return;
-}
-EXPORT_SYMBOL(gpio_free);
-
-int gpio_direction_input(unsigned gpio)
-{
-	if (likely(ns9xxx_valid_gpio(gpio))) {
-		int ret = -EINVAL;
-		unsigned long flags;
-
-		spin_lock_irqsave(&gpio_lock, flags);
-#if defined(CONFIG_PROCESSOR_NS9360)
-		if (processor_is_ns9360())
-			ret = __ns9360_gpio_configure(gpio, 0, 0, 3);
-		else
-#endif
-			BUG();
-
-		spin_unlock_irqrestore(&gpio_lock, flags);
-
-		return ret;
-
-	} else
-		return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned gpio, int value)
-{
-	if (likely(ns9xxx_valid_gpio(gpio))) {
-		int ret = -EINVAL;
-		unsigned long flags;
-
-		gpio_set_value(gpio, value);
-
-		spin_lock_irqsave(&gpio_lock, flags);
-#if defined(CONFIG_PROCESSOR_NS9360)
-		if (processor_is_ns9360())
-			ret = __ns9360_gpio_configure(gpio, 1, 0, 3);
-		else
-#endif
-			BUG();
-
-		spin_unlock_irqrestore(&gpio_lock, flags);
-
-		return ret;
-	} else
-		return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-int gpio_get_value(unsigned gpio)
-{
-#if defined(CONFIG_PROCESSOR_NS9360)
-	if (processor_is_ns9360())
-		return ns9360_gpio_get_value(gpio);
-	else
-#endif
-	{
-		BUG();
-		return -EINVAL;
-	}
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned gpio, int value)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&gpio_lock, flags);
-#if defined(CONFIG_PROCESSOR_NS9360)
-	if (processor_is_ns9360())
-		ns9360_gpio_set_value(gpio, value);
-	else
-#endif
-		BUG();
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-EXPORT_SYMBOL(gpio_set_value);

arch/arm/mach-ns9xxx/include/mach/board.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/board.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <asm/mach-types.h>
-
-#define board_is_a9m9750dev()	(0			\
-		|| machine_is_cc9p9750dev()		\
-		)
-
-#define board_is_a9mvali()	(0			\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define board_is_jscc9p9210()	(0			\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define board_is_jscc9p9215()	(0			\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define board_is_jscc9p9360()	(0			\
-		|| machine_is_cc9p9360js()		\
-		)
-
-#define board_is_uncbas()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_BOARD_H */

arch/arm/mach-ns9xxx/include/mach/debug-macro.S

-/*
- * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <asm/memory.h>
-
-#include <mach/regs-board-a9m9750dev.h>
-
-		.macro	addruart, rp, rv
-		ldr	\rp, =NS9XXX_CSxSTAT_PHYS(0)
-		ldr	\rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>

arch/arm/mach-ns9xxx/include/mach/entry-macro.S

-/*
- * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/regs-sys-common.h>
-
-		.macro	get_irqnr_preamble, base, tmp
-		ldr	\base, =SYS_ISRADDR
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
-		cmp	\irqstat, #0
-		ldrne	\irqnr, [\base]
-		.endm
-
-		.macro	disable_fiq
-		.endm

arch/arm/mach-ns9xxx/include/mach/gpio.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/gpio.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm/errno.h>
-
-int gpio_request(unsigned gpio, const char *label);
-
-void gpio_free(unsigned gpio);
-
-int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
-
-int gpio_direction_input(unsigned gpio);
-
-int gpio_direction_output(unsigned gpio, int value);
-
-int gpio_get_value(unsigned gpio);
-
-void gpio_set_value(unsigned gpio, int value);
-
-/*
- * ns9xxx can use gpio pins to trigger an irq, but it's not generic
- * enough to be supported by the gpio_to_irq/irq_to_gpio interface
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-/* get the cansleep() stubs */
-#include <asm-generic/gpio.h>
-
-#endif /* ifndef __ASM_ARCH_GPIO_H */

arch/arm/mach-ns9xxx/include/mach/hardware.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/hardware.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * NetSilicon NS9xxx internal mapping:
- *
- * physical                <--> virtual
- * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
- * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
- */
-#define io_p2v(x)	(0xf0000000 \
-			 + (((x) & 0xf0000000) >> 4) \
-			 + ((x) & 0x00ffffff))
-
-#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
-			 + ((x) & 0x00ffffff))
-
-#define __REGSHIFT(mask)	((mask) & (-(mask)))
-
-#define __REGBIT(bit)		((u32)1 << (bit))
-#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
-#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
-
-#ifndef __ASSEMBLY__
-
-#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
-#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
-
-#  define __REGSET(var, field, value)					\
-	((var) = (((var) & ~((field) & ~(value))) | (value)))
-
-#  define REGSET(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
-
-#  define REGSET_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
-
-#  define REGSETIM(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
-
-#  define REGSETIM_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
-
-#  define __REGGET(var, field)						\
-	(((var) & (field)))
-
-#  define REGGET(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field)
-
-#  define REGGET_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx)))
-
-#  define REGGETIM(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
-
-#  define REGGETIM_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx))) /			\
-	 __REGSHIFT(reg ## _ ## field((idx)))
-
-#else
-
-#  define __REG(x)	io_p2v(x)
-#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
-
-#endif
-
-#endif /* ifndef __ASM_ARCH_HARDWARE_H */

arch/arm/mach-ns9xxx/include/mach/io.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/io.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT  0xffffffff /* XXX */
-
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)    (a)
-#define __mem_isa(a)    (IO_BASE + (a))
-
-#endif /* ifndef __ASM_ARCH_IO_H */

arch/arm/mach-ns9xxx/include/mach/irqs.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/irqs.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* NetSilicon 9360 */
-#define IRQ_NS9XXX_WATCHDOG	0
-#define IRQ_NS9XXX_AHBBUSERR	1
-#define IRQ_NS9360_BBUSAGG	2
-/* irq 3 is reserved for NS9360 */
-#define IRQ_NS9XXX_ETHRX	4
-#define IRQ_NS9XXX_ETHTX	5
-#define IRQ_NS9XXX_ETHPHY	6
-#define IRQ_NS9360_LCD		7
-#define IRQ_NS9360_SERBRX	8
-#define IRQ_NS9360_SERBTX	9
-#define IRQ_NS9360_SERARX	10
-#define IRQ_NS9360_SERATX	11
-#define IRQ_NS9360_SERCRX	12
-#define IRQ_NS9360_SERCTX	13
-#define IRQ_NS9360_I2C		14
-#define IRQ_NS9360_BBUSDMA	15
-#define IRQ_NS9360_TIMER0	16
-#define IRQ_NS9360_TIMER1	17
-#define IRQ_NS9360_TIMER2	18
-#define IRQ_NS9360_TIMER3	19
-#define IRQ_NS9360_TIMER4	20
-#define IRQ_NS9360_TIMER5	21
-#define IRQ_NS9360_TIMER6	22
-#define IRQ_NS9360_TIMER7	23
-#define IRQ_NS9360_RTC		24
-#define IRQ_NS9360_USBHOST	25
-#define IRQ_NS9360_USBDEVICE	26
-#define IRQ_NS9360_IEEE1284	27
-#define IRQ_NS9XXX_EXT0		28
-#define IRQ_NS9XXX_EXT1		29
-#define IRQ_NS9XXX_EXT2		30
-#define IRQ_NS9XXX_EXT3		31
-
-#define BBUS_IRQ(irq)	(32 + irq)
-
-#define IRQ_BBUS_DMA		BBUS_IRQ(0)
-#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
-#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
-#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
-#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
-#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
-#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
-#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
-#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
-#define IRQ_BBUS_I2C		BBUS_IRQ(10)
-#define IRQ_BBUS_1284		BBUS_IRQ(11)
-#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
-#define IRQ_BBUS_RTC		BBUS_IRQ(13)
-#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
-#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
-#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
-#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
-
-/*
- * these Interrupts are specific for the a9m9750dev board.
- * They are generated by an FPGA that interrupts the CPU on
- * IRQ_NS9360_EXT2
- */
-#define FPGA_IRQ(irq)	(64 + irq)
-
-#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
-#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
-#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
-#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
-#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
-#define IRQ_FPGA_CF		FPGA_IRQ(5)
-#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
-#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
-
-#define NR_IRQS	72
-
-#endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-ns9xxx/include/mach/memory.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/memory.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* x in [0..3] */
-#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
-
-#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
-
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#endif

arch/arm/mach-ns9xxx/include/mach/module.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/module.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MODULE_H
-#define __ASM_ARCH_MODULE_H
-
-#include <asm/mach-types.h>
-
-#define module_is_cc7ucamry()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#define module_is_cc9c()	(0			\
-		)
-
-#define module_is_cc9p9210()	(0			\
-		|| machine_is_cc9p9210()		\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define module_is_cc9p9215()	(0			\
-		|| machine_is_cc9p9215()		\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define module_is_cc9p9360()	(0			\
-		|| machine_is_cc9p9360dev()		\
-		|| machine_is_cc9p9360js()		\
-		)
-
-#define module_is_cc9p9750()	(0			\
-		|| machine_is_a9m9750()			\
-		|| machine_is_cc9p9750js()		\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define module_is_ccw9c()	(0			\
-		)
-
-#define module_is_inc20otter()	(0			\
-		|| machine_is_inc20otter()		\
-		)
-
-#define module_is_otter()	(0			\
-		|| machine_is_otter()			\
-		)
-
-#endif /* ifndef __ASM_ARCH_MODULE_H */

arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSORNS9360_H
-#define __ASM_ARCH_PROCESSORNS9360_H
-
-#include <linux/init.h>
-
-void ns9360_reset(char mode);
-
-unsigned long ns9360_systemclock(void) __attribute__((const));
-
-static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
-static inline unsigned long ns9360_cpuclock(void)
-{
-	return ns9360_systemclock() / 2;
-}
-
-void __init ns9360_map_io(void);
-
-extern struct sys_timer ns9360_timer;
-
-int ns9360_gpio_configure(unsigned gpio, int inv, int func);
-
-#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */

arch/arm/mach-ns9xxx/include/mach/processor.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/processor.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSOR_H
-#define __ASM_ARCH_PROCESSOR_H
-
-#include <mach/module.h>
-
-#define processor_is_ns9210()	(0			\
-		|| module_is_cc7ucamry()		\
-		|| module_is_cc9p9210()			\
-		|| module_is_inc20otter()		\
-		|| module_is_otter()			\
-		)
-
-#define processor_is_ns9215()	(0			\
-		|| module_is_cc9p9215()			\
-		)
-
-#define processor_is_ns9360()	(0			\
-		|| module_is_cc9p9360()			\
-		|| module_is_cc9c()			\
-		|| module_is_ccw9c()			\
-		)
-
-#define processor_is_ns9750()	(0			\
-		|| module_is_cc9p9750()			\
-		)
-
-#define processor_is_ns921x()	(0			\
-		|| processor_is_ns9210()		\
-		|| processor_is_ns9215()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_PROCESSOR_H */

arch/arm/mach-ns9xxx/include/mach/regs-bbu.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBBU_H
-#define __ASM_ARCH_REGSBBU_H
-
-#include <mach/hardware.h>
-
-/* BBus Utility */
-
-/* GPIO Configuration Registers block 1 */
-/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
- * at 0 for each block.  That is, BBU_GCONFb1(0) is GPIO Configuration Register
- * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
-#define BBU_GCONFb1(x)	__REG2(0x90600010, (x))
-#define BBU_GCONFb2(x)	__REG2(0x90600100, (x))
-
-#define BBU_GCONFx_DIR(m)	__REGBIT(3 + (((m) & 7) << 2))
-#define BBU_GCONFx_DIR_INPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 0)
-#define BBU_GCONFx_DIR_OUTPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 1)
-#define BBU_GCONFx_INV(m)	__REGBIT(2 + (((m) & 7) << 2))
-#define BBU_GCONFx_INV_NO(m)		__REGVAL(BBU_GCONFx_INV(m), 0)
-#define BBU_GCONFx_INV_YES(m)		__REGVAL(BBU_GCONFx_INV(m), 1)
-#define BBU_GCONFx_FUNC(m)	__REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
-#define BBU_GCONFx_FUNC_0(m)		__REGVAL(BBU_GCONFx_FUNC(m), 0)
-#define BBU_GCONFx_FUNC_1(m)		__REGVAL(BBU_GCONFx_FUNC(m), 1)
-#define BBU_GCONFx_FUNC_2(m)		__REGVAL(BBU_GCONFx_FUNC(m), 2)
-#define BBU_GCONFx_FUNC_3(m)		__REGVAL(BBU_GCONFx_FUNC(m), 3)
-
-#define BBU_GCTRL1	__REG(0x90600030)
-#define BBU_GCTRL2	__REG(0x90600034)
-#define BBU_GCTRL3	__REG(0x90600120)
-
-#define BBU_GSTAT1	__REG(0x90600040)
-#define BBU_GSTAT2	__REG(0x90600044)
-#define BBU_GSTAT3	__REG(0x90600130)
-
-#endif /* ifndef __ASM_ARCH_REGSBBU_H */

arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
-#define __ASM_ARCH_REGSBOARDA9M9750_H
-
-#include <mach/hardware.h>
-
-#define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-#define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
-#define FPGA_UARTC_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
-#define FPGA_UARTD_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
-
-#define FPGA_IER	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
-#define FPGA_ISR	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
-
-#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */

arch/arm/mach-ns9xxx/include/mach/regs-mem.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSMEM_H
-#define __ASM_ARCH_REGSMEM_H
-
-#include <mach/hardware.h>
-
-/* Memory Module */
-
-/* Control register */
-#define MEM_CTRL	__REG(0xa0700000)
-
-/* Status register */
-#define MEM_STAT	__REG(0xa0700004)
-
-/* Configuration register */
-#define MEM_CONF	__REG(0xa0700008)
-
-/* Dynamic Memory Control register */
-#define MEM_DMCTRL	__REG(0xa0700020)
-
-/* Dynamic Memory Refresh Timer */
-#define MEM_DMRT	__REG(0xa0700024)
-
-/* Dynamic Memory Read Configuration register */
-#define MEM_DMRC	__REG(0xa0700028)
-
-/* Dynamic Memory Precharge Command Period (tRP) */
-#define MEM_DMPCP	__REG(0xa0700030)
-
-/* Dynamic Memory Active to Precharge Command Period (tRAS) */
-#define MEM_DMAPCP	__REG(0xa0700034)
-
-/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
-#define MEM_DMSRET	__REG(0xa0700038)
-
-/* Dynamic Memory Last Data Out to Active Time (tAPR) */
-#define MEM_DMLDOAT	__REG(0xa070003c)
-
-/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
-#define MEM_DMDIACT	__REG(0xa0700040)
-
-/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
-#define MEM_DMWRT	__REG(0xa0700044)
-
-/* Dynamic Memory Active to Active Command Period (tRC) */
-#define MEM_DMAACP	__REG(0xa0700048)
-
-/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
-#define MEM_DMARP	__REG(0xa070004c)
-
-/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
-#define MEM_DMESRAC	__REG(0xa0700050)
-
-/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
-#define MEM_DMABAABT	__REG(0xa0700054)
-
-/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
-#define MEM_DMLMACT	__REG(0xa0700058)
-
-/* Static Memory Extended Wait */
-#define MEM_SMEW	__REG(0xa0700080)
-
-/* Dynamic Memory Configuration Register x */
-#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
-
-/* Dynamic Memory RAS and CAS Delay x */
-#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
-
-/* Static Memory Configuration Register x */
-#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
-
-/* Static Memory Configuration Register x: Write protect */
-#define MEM_SMC_PSMC		__REGBIT(20)
-#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
-#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
-
-/* Static Memory Configuration Register x: Buffer enable */
-#define MEM_SMC_BSMC		__REGBIT(19)
-#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
-#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
-
-/* Static Memory Configuration Register x: Extended Wait */
-#define MEM_SMC_EW		__REGBIT(8)
-#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
-#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
-
-/* Static Memory Configuration Register x: Byte lane state */
-#define MEM_SMC_PB		__REGBIT(7)
-#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
-#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
-
-/* Static Memory Configuration Register x: Chip select polarity */
-#define MEM_SMC_PC		__REGBIT(6)
-#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
-#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
-
-/* static memory configuration register x: page mode*/
-#define MEM_SMC_PM		__REGBIT(3)
-#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
-#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
-
-/* static memory configuration register x: Memory width */
-#define MEM_SMC_MW		__REGBITS(1, 0)
-#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
-#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
-#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
-
-/* Static Memory Write Enable Delay x */
-#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
-
-/* Static Memory Output Enable Delay x */
-#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
-
-/* Static Memory Read Delay x */
-#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
-
-/* Static Memory Page Mode Read Delay 0 */
-#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
-
-/* Static Memory Write Delay */
-#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
-
-/* Static Memory Turn Round Delay x */
-#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
-
-#endif /* ifndef __ASM_ARCH_REGSMEM_H */

arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_REGSSYSCOMMON_H
-#define __ASM_ARCH_REGSSYSCOMMON_H
-#include <mach/hardware.h>
-
-/* Interrupt Vector Address Register Level x */
-#define SYS_IVA(x)	__REG2(0xa09000c4, (x))
-
-/* Interrupt Configuration registers */
-#define SYS_IC(x)	__REG2(0xa0900144, (x))
-
-/* ISRADDR */
-#define SYS_ISRADDR     __REG(0xa0900164)
-
-/* Interrupt Status Active */
-#define SYS_ISA		__REG(0xa0900168)
-
-/* Interrupt Status Raw */
-#define SYS_ISR		__REG(0xa090016c)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */

arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSSYSNS9360_H
-#define __ASM_ARCH_REGSSYSNS9360_H
-
-#include <mach/hardware.h>
-
-/* System Control Module */
-
-/* AHB Arbiter Gen Configuration */
-#define SYS_AHBAGENCONF	__REG(0xa0900000)
-
-/* BRC */
-#define SYS_BRC(x)	__REG2(0xa0900004, (x))
-
-/* Timer x Reload Count register */
-#define SYS_TRC(x)	__REG2(0xa0900044, (x))
-
-/* Timer x Read register */
-#define SYS_TR(x)	__REG2(0xa0900084, (x))
-
-/* Timer Interrupt Status register */
-#define SYS_TIS		__REG(0xa0900170)
-
-/* PLL Configuration register */
-#define SYS_PLL		__REG(0xa0900188)
-
-/* PLL FS status */
-#define SYS_PLL_FS		__REGBITS(24, 23)
-
-/* PLL ND status */
-#define SYS_PLL_ND		__REGBITS(20, 16)
-
-/* PLL Configuration register: PLL SW change */
-#define SYS_PLL_SWC		__REGBIT(15)
-#define SYS_PLL_SWC_NO			__REGVAL(SYS_PLL_SWC, 0)
-#define SYS_PLL_SWC_YES			__REGVAL(SYS_PLL_SWC, 1)
-
-/* Timer x Control register */
-#define SYS_TC(x)	__REG2(0xa0900190, (x))
-
-/* Timer x Control register: Timer enable */
-#define SYS_TCx_TEN		__REGBIT(15)
-#define SYS_TCx_TEN_DIS			__REGVAL(SYS_TCx_TEN, 0)
-#define SYS_TCx_TEN_EN			__REGVAL(SYS_TCx_TEN, 1)
-
-/* Timer x Control register: CPU debug mode */
-#define SYS_TCx_TDBG		__REGBIT(10)
-#define SYS_TCx_TDBG_CONT		__REGVAL(SYS_TCx_TDBG, 0)
-#define SYS_TCx_TDBG_STOP		__REGVAL(SYS_TCx_TDBG, 1)
-
-/* Timer x Control register: Interrupt clear */
-#define SYS_TCx_INTC		__REGBIT(9)
-#define SYS_TCx_INTC_UNSET		__REGVAL(SYS_TCx_INTC, 0)
-#define SYS_TCx_INTC_SET		__REGVAL(SYS_TCx_INTC, 1)
-
-/* Timer x Control register: Timer clock select */
-#define SYS_TCx_TLCS		__REGBITS(8, 6)
-#define SYS_TCx_TLCS_CPU		__REGVAL(SYS_TCx_TLCS, 0)	/* CPU clock */
-#define SYS_TCx_TLCS_DIV2		__REGVAL(SYS_TCx_TLCS, 1)	/* CPU clock / 2 */
-#define SYS_TCx_TLCS_DIV4		__REGVAL(SYS_TCx_TLCS, 2)	/* CPU clock / 4 */
-#define SYS_TCx_TLCS_DIV8		__REGVAL(SYS_TCx_TLCS, 3)	/* CPU clock / 8 */
-#define SYS_TCx_TLCS_DIV16		__REGVAL(SYS_TCx_TLCS, 4)	/* CPU clock / 16 */
-#define SYS_TCx_TLCS_DIV32		__REGVAL(SYS_TCx_TLCS, 5)	/* CPU clock / 32 */
-#define SYS_TCx_TLCS_DIV64		__REGVAL(SYS_TCx_TLCS, 6)	/* CPU clock / 64 */
-#define SYS_TCx_TLCS_EXT		__REGVAL(SYS_TCx_TLCS, 7)
-
-/* Timer x Control register: Timer mode */
-#define SYS_TCx_TM		__REGBITS(5, 4)
-#define SYS_TCx_TM_IEE			__REGVAL(SYS_TCx_TM, 0)		/* Internal timer or external event */
-#define SYS_TCx_TM_ELL			__REGVAL(SYS_TCx_TM, 1)		/* External low-level, gated timer */
-#define SYS_TCx_TM_EHL			__REGVAL(SYS_TCx_TM, 2)		/* External high-level, gated timer */
-#define SYS_TCx_TM_CONCAT		__REGVAL(SYS_TCx_TM, 3)		/* Concatenate the lower timer. */
-
-/* Timer x Control register: Interrupt select */
-#define SYS_TCx_INTS		__REGBIT(3)
-#define SYS_TCx_INTS_DIS		__REGVAL(SYS_TCx_INTS, 0)
-#define SYS_TCx_INTS_EN			__REGVAL(SYS_TCx_INTS, 1)
-
-/* Timer x Control register: Up/down select */
-#define SYS_TCx_UDS		__REGBIT(2)
-#define SYS_TCx_UDS_UP			__REGVAL(SYS_TCx_UDS, 0)
-#define SYS_TCx_UDS_DOWN		__REGVAL(SYS_TCx_UDS, 1)
-
-/* Timer x Control register: 32- or 16-bit timer */
-#define SYS_TCx_TSZ		__REGBIT(1)
-#define SYS_TCx_TSZ_16			__REGVAL(SYS_TCx_TSZ, 0)
-#define SYS_TCx_TSZ_32			__REGVAL(SYS_TCx_TSZ, 1)
-
-/* Timer x Control register: Reload enable */
-#define SYS_TCx_REN		__REGBIT(0)
-#define SYS_TCx_REN_DIS			__REGVAL(SYS_TCx_REN, 0)
-#define SYS_TCx_REN_EN			__REGVAL(SYS_TCx_REN, 1)
-
-/* System Memory Chip Select x Dynamic Memory Base */
-#define SYS_SMCSDMB(x)	__REG2(0xa09001d0, (x) << 1)
-
-/* System Memory Chip Select x Dynamic Memory Mask */
-#define SYS_SMCSDMM(x)	__REG2(0xa09001d4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base */
-#define SYS_SMCSSMB(x)	__REG2(0xa09001f0, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base: Chip select x base */
-#define SYS_SMCSSMB_CSxB	__REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask */
-#define SYS_SMCSSMM(x)	__REG2(0xa09001f4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
-#define SYS_SMCSSMM_CSxM	__REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
-#define SYS_SMCSSMM_CSEx	__REGBIT(0)
-#define SYS_SMCSSMM_CSEx_DIS		__REGVAL(SYS_SMCSSMM_CSEx, 0)
-#define SYS_SMCSSMM_CSEx_EN		__REGVAL(SYS_SMCSSMM_CSEx, 1)
-
-/* General purpose, user-defined ID register */
-#define SYS_GENID	__REG(0xa0900210)
-
-/* External Interrupt x Control register */
-#define SYS_EIC(x)	__REG2(0xa0900214, (x))
-
-/* External Interrupt x Control register: Status */
-#define SYS_EIC_STS		__REGBIT(3)
-
-/* External Interrupt x Control register: Clear */
-#define SYS_EIC_CLR		__REGBIT(2)
-
-/* External Interrupt x Control register: Polarity */
-#define SYS_EIC_PLTY		__REGBIT(1)
-#define SYS_EIC_PLTY_AH			__REGVAL(SYS_EIC_PLTY, 0)
-#define SYS_EIC_PLTY_AL			__REGVAL(SYS_EIC_PLTY, 1)
-
-/* External Interrupt x Control register: Level edge */
-#define SYS_EIC_LVEDG		__REGBIT(0)
-#define SYS_EIC_LVEDG_LEVEL		__REGVAL(SYS_EIC_LVEDG, 0)
-#define SYS_EIC_LVEDG_EDGE		__REGVAL(SYS_EIC_LVEDG, 1)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */

arch/arm/mach-ns9xxx/include/mach/system.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/system.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <mach/processor.h>
-#include <mach/processor-ns9360.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-#ifdef CONFIG_PROCESSOR_NS9360
-	if (processor_is_ns9360())
-		ns9360_reset(mode);
-	else
-#endif
-		BUG();
-
-	BUG();
-}
-
-#endif /* ifndef __ASM_ARCH_SYSTEM_H */

arch/arm/mach-ns9xxx/include/mach/timex.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/timex.h
- *
- * Copyright (C) 2005-2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
- * See there for an explanation.
- */
-#define CLOCK_TICK_RATE         12000000
-
-#endif /* ifndef __ASM_ARCH_TIMEX_H */

arch/arm/mach-ns9xxx/include/mach/uncompress.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/uncompress.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-
-#define __REG(x)	((void __iomem __force *)(x))
-
-static void putc_dummy(char c, void __iomem *base)
-{
-	/* nothing */
-}
-
-static int timeout;
-
-static void putc_ns9360(char c, void __iomem *base)
-{
-	do {
-		if (timeout)
-			--timeout;
-
-		if (__raw_readl(base + 8) & (1 << 3)) {
-			__raw_writeb(c, base + 16);
-			timeout = 0x10000;
-			break;
-		}
-	} while (timeout);
-}
-
-static void putc_a9m9750dev(char c, void __iomem *base)
-{
-	do {
-		if (timeout)
-			--timeout;
-
-		if (__raw_readb(base + 5) & (1 << 5)) {
-			__raw_writeb(c, base);
-			timeout = 0x10000;
-			break;
-		}
-	} while (timeout);
-
-}
-
-static void putc_ns921x(char c, void __iomem *base)
-{
-	do {
-		if (timeout)
-			--timeout;
-
-		if (!(__raw_readl(base) & (1 << 11))) {
-			__raw_writeb(c, base + 0x0028);
-			timeout = 0x10000;
-			break;
-		}
-	} while (timeout);
-}
-
-#define MSCS __REG(0xA0900184)
-
-#define NS9360_UARTA	__REG(0x90200040)
-#define NS9360_UARTB	__REG(0x90200000)
-#define NS9360_UARTC	__REG(0x90300000)
-#define NS9360_UARTD	__REG(0x90300040)
-
-#define NS9360_UART_ENABLED(base)					\
-		(__raw_readl(NS9360_UARTA) & (1 << 31))
-
-#define A9M9750DEV_UARTA	__REG(0x40000000)
-
-#define NS921XSYS_CLOCK	__REG(0xa090017c)
-#define NS921X_UARTA	__REG(0x90010000)
-#define NS921X_UARTB	__REG(0x90018000)
-#define NS921X_UARTC	__REG(0x90020000)
-#define NS921X_UARTD	__REG(0x90028000)
-
-#define NS921X_UART_ENABLED(base)					\
-		(__raw_readl((base) + 0x1000) & (1 << 29))
-
-static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
-{
-	timeout = 0x10000;
-	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
-		/* ns9360 or ns9750 */
-		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTA;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTB;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTC;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTD;
-			return;
-		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
-			*putc = putc_a9m9750dev;
-			*base = A9M9750DEV_UARTA;
-			return;
-		}
-	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
-		/* ns921x */
-		u32 clock = __raw_readl(NS921XSYS_CLOCK);
-
-		if ((clock & (1 << 1)) &&
-				NS921X_UART_ENABLED(NS921X_UARTA)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTA;
-			return;
-		} else if ((clock & (1 << 2)) &&
-				NS921X_UART_ENABLED(NS921X_UARTB)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTB;
-			return;
-		} else if ((clock & (1 << 3)) &&
-				NS921X_UART_ENABLED(NS921X_UARTC)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTC;
-			return;
-		} else if ((clock & (1 << 4)) &&
-				NS921X_UART_ENABLED(NS921X_UARTD)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTD;
-			return;
-		}
-	}
-
-	*putc = putc_dummy;
-}
-
-void (*myputc)(char, void __iomem *);
-void __iomem *base;
-
-static void putc(char c)
-{
-	myputc(c, base);
-}
-
-static void arch_decomp_setup(void)
-{
-	autodetect(&myputc, &base);
-}
-#define arch_decomp_wdog()
-
-static void flush(void)
-{
-	/* nothing */
-}
-
-#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-ns9xxx/include/mach/vmalloc.h

-/*
- * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     (0xf0000000UL)
-
-#endif /* ifndef __ASM_ARCH_VMALLOC_H */

arch/arm/mach-ns9xxx/irq.c

-/*
- * arch/arm/mach-ns9xxx/irq.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/io.h>
-#include <asm/mach/irq.h>
-#include <mach/regs-sys-common.h>
-#include <mach/irqs.h>
-#include <mach/board.h>
-
-#include "generic.h"
-
-/* simple interrupt prio table: prio(x) < prio(y) <=> x < y */
-#define irq2prio(i) (i)
-#define prio2irq(p) (p)
-
-static void ns9xxx_mask_irq(struct irq_data *d)
-{
-	/* XXX: better use cpp symbols */
-	int prio = irq2prio(d->irq);
-	u32 ic = __raw_readl(SYS_IC(prio / 4));
-	ic &= ~(1 << (7 + 8 * (3 - (prio & 3))));
-	__raw_writel(ic, SYS_IC(prio / 4));
-}
-
-static void ns9xxx_eoi_irq(struct irq_data *d)
-{
-	__raw_writel(0, SYS_ISRADDR);
-}
-
-static void ns9xxx_unmask_irq(struct irq_data *d)
-{
-	/* XXX: better use cpp symbols */
-	int prio = irq2prio(d->irq);
-	u32 ic = __raw_readl(SYS_IC(prio / 4));
-	ic |= 1 << (7 + 8 * (3 - (prio & 3)));
-	__raw_writel(ic, SYS_IC(prio / 4));
-}
-
-static struct irq_chip ns9xxx_chip = {
-	.irq_eoi	= ns9xxx_eoi_irq,
-	.irq_mask	= ns9xxx_mask_irq,
-	.irq_unmask	= ns9xxx_unmask_irq,
-};
-
-void __init ns9xxx_init_irq(void)
-{
-	int i;
-
-	/* disable all IRQs */
-	for (i = 0; i < 8; ++i)
-		__raw_writel(prio2irq(4 * i) << 24 |
-				prio2irq(4 * i + 1) << 16 |
-				prio2irq(4 * i + 2) << 8 |
-				prio2irq(4 * i + 3),
-				SYS_IC(i));
-
-	for (i = 0; i < 32; ++i)
-		__raw_writel(prio2irq(i), SYS_IVA(i));
-
-	for (i = 0; i <= 31; ++i) {
-		irq_set_chip_and_handler(i, &ns9xxx_chip, handle_fasteoi_irq);
-		set_irq_flags(i, IRQF_VALID);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-}

arch/arm/mach-ns9xxx/mach-cc9p9360dev.c

-/*
- * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/processor-ns9360.h>
-
-#include "board-a9m9750dev.h"
-#include "generic.h"
-
-static void __init mach_cc9p9360dev_map_io(void)
-{
-	ns9360_map_io();
-	board_a9m9750dev_map_io();
-}
-
-static void __init mach_cc9p9360dev_init_irq(void)
-{
-	ns9xxx_init_irq();
-	board_a9m9750dev_init_irq();
-}
-
-static void __init mach_cc9p9360dev_init_machine(void)
-{
-	ns9xxx_init_machine();
-	board_a9m9750dev_init_machine();
-}
-
-MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard")
-	.map_io = mach_cc9p9360dev_map_io,
-	.init_irq = mach_cc9p9360dev_init_irq,
-	.init_machine = mach_cc9p9360dev_init_machine,
-	.timer = &ns9360_timer,
-	.boot_params = 0x100,
-MACHINE_END

arch/arm/mach-ns9xxx/mach-cc9p9360js.c

-/*
- * arch/arm/mach-ns9xxx/mach-cc9p9360js.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/processor-ns9360.h>
-
-#include "board-jscc9p9360.h"
-#include "generic.h"
-
-static void __init mach_cc9p9360js_init_machine(void)
-{
-	ns9xxx_init_machine();
-	board_jscc9p9360_init_machine();
-}
-
-MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard")
-	.map_io = ns9360_map_io,
-	.init_irq = ns9xxx_init_irq,
-	.init_machine = mach_cc9p9360js_init_machine,
-	.timer = &ns9360_timer,
-	.boot_params = 0x100,
-MACHINE_END

arch/arm/mach-ns9xxx/plat-serial8250.c

-/*
- * arch/arm/mach-ns9xxx/plat-serial8250.c
- *
- * Copyright (C) 2008 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/slab.h>
-
-#include <mach/regs-board-a9m9750dev.h>
-#include <mach/board.h>
-
-#define DRIVER_NAME "serial8250"
-
-static int __init ns9xxx_plat_serial8250_init(void)
-{
-	struct plat_serial8250_port *pdata;
-	struct platform_device *pdev;
-	int ret = -ENOMEM;
-	int i;
-
-	if (!board_is_a9m9750dev())
-		return -ENODEV;
-
-	pdev = platform_device_alloc(DRIVER_NAME, 0);
-	if (!pdev)
-		goto err;
-
-	pdata = kzalloc(5 * sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		goto err;
-
-	pdev->dev.platform_data = pdata;
-
-	pdata[0].iobase = FPGA_UARTA_BASE;
-	pdata[1].iobase = FPGA_UARTB_BASE;
-	pdata[2].iobase = FPGA_UARTC_BASE;
-	pdata[3].iobase = FPGA_UARTD_BASE;
-
-	for (i = 0; i < 4; ++i) {
-		pdata[i].membase = (void __iomem *)pdata[i].iobase;
-		pdata[i].mapbase = pdata[i].iobase;
-		pdata[i].iotype = UPIO_MEM;
-		pdata[i].uartclk = 18432000;
-		pdata[i].flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-	}
-
-	pdata[0].irq = IRQ_FPGA_UARTA;
-	pdata[1].irq = IRQ_FPGA_UARTB;
-	pdata[2].irq = IRQ_FPGA_UARTC;
-	pdata[3].irq = IRQ_FPGA_UARTD;
-
-	ret = platform_device_add(pdev);
-	if (ret) {
-err:
-		platform_device_put(pdev);
-
-		printk(KERN_WARNING "Could not add %s (errno=%d)\n",
-				DRIVER_NAME, ret);
-	}
-
-	return 0;
-}
-
-arch_initcall(ns9xxx_plat_serial8250_init);

arch/arm/mach-ns9xxx/processor-ns9360.c

-/*
- * arch/arm/mach-ns9xxx/processor-ns9360.c
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <mach/processor-ns9360.h>
-#include <mach/regs-sys-ns9360.h>
-
-void ns9360_reset(char mode)
-{
-	u32 reg;
-
-	reg = __raw_readl(SYS_PLL) >> 16;
-	REGSET(reg, SYS_PLL, SWC, YES);
-	__raw_writel(reg, SYS_PLL);
-}
-
-#define CRYSTAL 29491200 /* Hz */
-unsigned long ns9360_systemclock(void)
-{
-	u32 pll = __raw_readl(SYS_PLL);
-	return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1)
-		>> REGGETIM(pll, SYS_PLL, FS);
-}
-
-static struct map_desc ns9360_io_desc[] __initdata = {
-	{ /* BBus */
-		.virtual = io_p2v(0x90000000),
-		.pfn = __phys_to_pfn(0x90000000),
-		.length = 0x00700000,
-		.type = MT_DEVICE,
-	}, { /* AHB */
-		.virtual = io_p2v(0xa0100000),
-		.pfn = __phys_to_pfn(0xa0100000),
-		.length = 0x00900000,
-		.type = MT_DEVICE,
-	},
-};
-
-void __init ns9360_map_io(void)
-{
-	iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc));
-}

arch/arm/mach-ns9xxx/time-ns9360.c

-/*
- * arch/arm/mach-ns9xxx/time-ns9360.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/jiffies.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/stringify.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <mach/processor-ns9360.h>
-#include <mach/regs-sys-ns9360.h>
-#include <mach/irqs.h>
-#include <mach/system.h>
-#include "generic.h"
-
-#define TIMER_CLOCKSOURCE 0
-#define TIMER_CLOCKEVENT 1
-static u32 latch;
-
-static cycle_t ns9360_clocksource_read(struct clocksource *cs)
-{
-	return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
-}
-
-static struct clocksource ns9360_clocksource = {
-	.name	= "ns9360-timer" __stringify(TIMER_CLOCKSOURCE),
-	.rating	= 300,
-	.read	= ns9360_clocksource_read,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void ns9360_clockevent_setmode(enum clock_event_mode mode,
-		struct clock_event_device *clk)
-{
-	u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT));
-		REGSET(tc, SYS_TCx, REN, EN);
-		REGSET(tc, SYS_TCx, INTS, EN);
-		REGSET(tc, SYS_TCx, TEN, EN);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		REGSET(tc, SYS_TCx, REN, DIS);
-		REGSET(tc, SYS_TCx, INTS, EN);
-
-		/* fall through */
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-	default:
-		REGSET(tc, SYS_TCx, TEN, DIS);
-		break;
-	}
-
-	__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
-}
-
-static int ns9360_clockevent_setnextevent(unsigned long evt,
-		struct clock_event_device *clk)
-{
-	u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
-
-	if (REGGET(tc, SYS_TCx, TEN)) {
-		REGSET(tc, SYS_TCx, TEN, DIS);
-		__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
-	}
-
-	REGSET(tc, SYS_TCx, TEN, EN);
-
-	__raw_writel(evt, SYS_TRC(TIMER_CLOCKEVENT));
-
-	__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
-
-	return 0;
-}
-
-static struct clock_event_device ns9360_clockevent_device = {
-	.name		= "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
-	.shift		= 20,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= ns9360_clockevent_setmode,
-	.set_next_event	= ns9360_clockevent_setnextevent,
-};
-
-static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id)
-{
-	int timerno = irq - IRQ_NS9360_TIMER0;
-	u32 tc;
-
-	struct clock_event_device *evt = &ns9360_clockevent_device;
-
-	/* clear irq */
-	tc = __raw_readl(SYS_TC(timerno));
-	if (REGGET(tc, SYS_TCx, REN) == SYS_TCx_REN_DIS) {
-		REGSET(tc, SYS_TCx, TEN, DIS);
-		__raw_writel(tc, SYS_TC(timerno));
-	}
-	REGSET(tc, SYS_TCx, INTC, SET);
-	__raw_writel(tc, SYS_TC(timerno));
-	REGSET(tc, SYS_TCx, INTC, UNSET);
-	__raw_writel(tc, SYS_TC(timerno));
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ns9360_clockevent_action = {
-	.name		= "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ns9360_clockevent_handler,
-};
-
-static void __init ns9360_timer_init(void)
-{
-	int tc;
-
-	tc = __raw_readl(SYS_TC(TIMER_CLOCKSOURCE));
-	if (REGGET(tc, SYS_TCx, TEN)) {
-		REGSET(tc, SYS_TCx, TEN, DIS);
-		__raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
-	}
-
-	__raw_writel(0, SYS_TRC(TIMER_CLOCKSOURCE));
-
-	REGSET(tc, SYS_TCx, TEN, EN);
-	REGSET(tc, SYS_TCx, TDBG, STOP);
-	REGSET(tc, SYS_TCx, TLCS, CPU);
-	REGSET(tc, SYS_TCx, TM, IEE);
-	REGSET(tc, SYS_TCx, INTS, DIS);
-	REGSET(tc, SYS_TCx, UDS, UP);
-	REGSET(tc, SYS_TCx, TSZ, 32);
-	REGSET(tc, SYS_TCx, REN, EN);
-
-	__raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
-
-	clocksource_register_hz(&ns9360_clocksource, ns9360_cpuclock());
-
-	latch = SH_DIV(ns9360_cpuclock(), HZ, 0);
-
-	tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
-	REGSET(tc, SYS_TCx, TEN, DIS);
-	REGSET(tc, SYS_TCx, TDBG, STOP);
-	REGSET(tc, SYS_TCx, TLCS, CPU);
-	REGSET(tc, SYS_TCx, TM, IEE);
-	REGSET(tc, SYS_TCx, INTS, DIS);
-	REGSET(tc, SYS_TCx, UDS, DOWN);
-	REGSET(tc, SYS_TCx, TSZ, 32);
-	REGSET(tc, SYS_TCx, REN, EN);
-	__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
-
-	ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(),
-			NSEC_PER_SEC, ns9360_clockevent_device.shift);
-	ns9360_clockevent_device.max_delta_ns =
-		clockevent_delta2ns(-1, &ns9360_clockevent_device);
-	ns9360_clockevent_device.min_delta_ns =
-		clockevent_delta2ns(1, &ns9360_clockevent_device);
-
-	ns9360_clockevent_device.cpumask = cpumask_of(0);
-	clockevents_register_device(&ns9360_clockevent_device);
-
-	setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT,
-			&ns9360_clockevent_action);
-}
-
-struct sys_timer ns9360_timer = {
-	.init = ns9360_timer_init,
-};

arch/arm/mach-spear3xx/Kconfig

@@ -4,9 +4,26 @@
 
 if ARCH_SPEAR3XX
 
-choice
-	prompt "SPEAr3XX Family"
-	default MACH_SPEAR300
+menu "SPEAr3xx Implementations"
+config BOARD_SPEAR300_EVB
+	bool "SPEAr300 Evaluation Board"
+	select MACH_SPEAR300
+	help
+	  Supports ST SPEAr300 Evaluation Board
+
+config BOARD_SPEAR310_EVB
+	bool "SPEAr310 Evaluation Board"
+	select MACH_SPEAR310
+	help
+	  Supports ST SPEAr310 Evaluation Board
+
+config BOARD_SPEAR320_EVB
+	bool "SPEAr320 Evaluation Board"
+	select MACH_SPEAR320
+	help
+	  Supports ST SPEAr320 Evaluation Board
+
+endmenu
 
 config MACH_SPEAR300
 	bool "SPEAr300"
@@ -23,11 +40,4 @@ config MACH_SPEAR320
 	help
 	  Supports ST SPEAr320 Machine
 
-endchoice
-
-# Adding SPEAr3XX machine specific configuration files
-source "arch/arm/mach-spear3xx/Kconfig300"
-source "arch/arm/mach-spear3xx/Kconfig310"
-source "arch/arm/mach-spear3xx/Kconfig320"
-
 endif #ARCH_SPEAR3XX

arch/arm/mach-spear3xx/Kconfig300

-#
-# SPEAr300 machine configuration file
-#
-
-if MACH_SPEAR300
-
-choice
-	prompt "SPEAr300 Boards"
-	default BOARD_SPEAR300_EVB
-
-config BOARD_SPEAR300_EVB
-	bool "SPEAr300 Evaluation Board"
-	help
-	  Supports ST SPEAr300 Evaluation Board
-endchoice
-
-endif	#MACH_SPEAR300

arch/arm/mach-spear3xx/Kconfig310

-#
-# SPEAr310 machine configuration file
-#
-
-if MACH_SPEAR310
-
-choice
-	prompt "SPEAr310 Boards"
-	default BOARD_SPEAR310_EVB
-
-config BOARD_SPEAR310_EVB
-	bool "SPEAr310 Evaluation Board"
-	help
-	  Supports ST SPEAr310 Evaluation Board
-endchoice
-
-endif	#MACH_SPEAR310

arch/arm/mach-spear3xx/Kconfig320

-#
-# SPEAr320 machine configuration file
-#
-
-if MACH_SPEAR320
-
-choice
-	prompt "SPEAr320 Boards"
-	default BOARD_SPEAR320_EVB
-
-config BOARD_SPEAR320_EVB
-	bool "SPEAr320 Evaluation Board"
-	help
-	  Supports ST SPEAr320 Evaluation Board
-endchoice
-
-endif	#MACH_SPEAR320

arch/arm/mach-spear3xx/clock.c

@@ -13,6 +13,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <asm/mach-types.h>
 #include <plat/clock.h>
 #include <mach/misc_regs.h>
 
@@ -688,56 +689,71 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{ .dev_id = "adc",		.clk = &adc_clk},
 	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
 	{ .dev_id = "gpio",		.clk = &gpio_clk},
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-	{ .dev_id = "physmap-flash",	.clk = &emi_clk},
-#endif
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
-	defined(CONFIG_MACH_SPEAR320)
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-#endif
-
-	/* common clock to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+};
 
-	/* spear300 machine specific clock structures */
+/* array of all spear 300 clock lookups */
 #ifdef CONFIG_MACH_SPEAR300
+static struct clk_lookup spear300_clk_lookups[] = {
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	{ .con_id = "fsmc",		.clk = &fsmc_clk},
 	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
 	{ .dev_id = "keyboard",		.clk = &kbd_clk},
+	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
+};
 #endif
 
-	/* spear310 machine specific clock structures */
+/* array of all spear 310 clock lookups */
 #ifdef CONFIG_MACH_SPEAR310
+static struct clk_lookup spear310_clk_lookups[] = {
+	{ .con_id = "fsmc",		.clk = &fsmc_clk},
+	{ .con_id = "emi",		.clk = &emi_clk},
+	{ .dev_id = "uart1",		.clk = &uart1_clk},
+	{ .dev_id = "uart2",		.clk = &uart2_clk},
 	{ .dev_id = "uart3",		.clk = &uart3_clk},
 	{ .dev_id = "uart4",		.clk = &uart4_clk},
 	{ .dev_id = "uart5",		.clk = &uart5_clk},
-
+};
 #endif
-	/* spear320 machine specific clock structures */
+
+/* array of all spear 320 clock lookups */
 #ifdef CONFIG_MACH_SPEAR320
+static struct clk_lookup spear320_clk_lookups[] = {
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	{ .con_id = "fsmc",		.clk = &fsmc_clk},
+	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
+	{ .con_id = "emi",		.clk = &emi_clk},
+	{ .dev_id = "pwm",		.clk = &pwm_clk},
+	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
 	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
 	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
-	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
 	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
 	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "pwm",		.clk = &pwm_clk},
-#endif
+	{ .dev_id = "uart1",		.clk = &uart1_clk},
+	{ .dev_id = "uart2",		.clk = &uart2_clk},
 };
+#endif
 
-void __init clk_init(void)
+void __init spear3xx_clk_init(void)
 {
-	int i;
+	int i, cnt;
+	struct clk_lookup *lookups;
+
+	if (machine_is_spear300()) {
+		cnt = ARRAY_SIZE(spear300_clk_lookups);
+		lookups = spear300_clk_lookups;
+	} else if (machine_is_spear310()) {
+		cnt = ARRAY_SIZE(spear310_clk_lookups);
+		lookups = spear310_clk_lookups;
+	} else {
+		cnt = ARRAY_SIZE(spear320_clk_lookups);
+		lookups = spear320_clk_lookups;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
 		clk_register(&spear_clk_lookups[i]);
 
-	recalc_root_clocks();
+	for (i = 0; i < cnt; i++)
+		clk_register(&lookups[i]);
+
+	clk_init();
 }

arch/arm/mach-spear3xx/include/mach/generic.h

@@ -27,16 +27,16 @@
  * Following GPT channels will be used as clock source and clockevent
  */
 #define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
+#define SPEAR_GPT0_CHAN0_IRQ	SPEAR3XX_IRQ_CPU_GPT1_1
+#define SPEAR_GPT0_CHAN1_IRQ	SPEAR3XX_IRQ_CPU_GPT1_2
 
 /* Add spear3xx family device structure declarations here */
-extern struct amba_device gpio_device;
-extern struct amba_device uart_device;
+extern struct amba_device spear3xx_gpio_device;
+extern struct amba_device spear3xx_uart_device;
 extern struct sys_timer spear3xx_timer;
 
 /* Add spear3xx family function declarations here */
-void __init clk_init(void);
+void __init spear3xx_clk_init(void);
 void __init spear_setup_timer(void);
 void __init spear3xx_map_io(void);
 void __init spear3xx_init_irq(void);
@@ -60,81 +60,80 @@ void __init spear3xx_init(void);
 #define PMX_TIMER_1_2_MASK	(1 << 0)
 
 /* pad mux devices */
-extern struct pmx_dev pmx_firda;
-extern struct pmx_dev pmx_i2c;
-extern struct pmx_dev pmx_ssp_cs;
-extern struct pmx_dev pmx_ssp;
-extern struct pmx_dev pmx_mii;
-extern struct pmx_dev pmx_gpio_pin0;
-extern struct pmx_dev pmx_gpio_pin1;
-extern struct pmx_dev pmx_gpio_pin2;
-extern struct pmx_dev pmx_gpio_pin3;
-extern struct pmx_dev pmx_gpio_pin4;
-extern struct pmx_dev pmx_gpio_pin5;
-extern struct pmx_dev pmx_uart0_modem;
-extern struct pmx_dev pmx_uart0;
-extern struct pmx_dev pmx_timer_3_4;
-extern struct pmx_dev pmx_timer_1_2;
+extern struct pmx_dev spear3xx_pmx_firda;
+extern struct pmx_dev spear3xx_pmx_i2c;
+extern struct pmx_dev spear3xx_pmx_ssp_cs;
+extern struct pmx_dev spear3xx_pmx_ssp;
+extern struct pmx_dev spear3xx_pmx_mii;
+extern struct pmx_dev spear3xx_pmx_gpio_pin0;
+extern struct pmx_dev spear3xx_pmx_gpio_pin1;
+extern struct pmx_dev spear3xx_pmx_gpio_pin2;
+extern struct pmx_dev spear3xx_pmx_gpio_pin3;
+extern struct pmx_dev spear3xx_pmx_gpio_pin4;
+extern struct pmx_dev spear3xx_pmx_gpio_pin5;
+extern struct pmx_dev spear3xx_pmx_uart0_modem;
+extern struct pmx_dev spear3xx_pmx_uart0;
+extern struct pmx_dev spear3xx_pmx_timer_3_4;
+extern struct pmx_dev spear3xx_pmx_timer_1_2;
 
 #if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
 /* padmux plgpio devices */
-extern struct pmx_dev pmx_plgpio_0_1;
-extern struct pmx_dev pmx_plgpio_2_3;
-extern struct pmx_dev pmx_plgpio_4_5;
-extern struct pmx_dev pmx_plgpio_6_9;
-extern struct pmx_dev pmx_plgpio_10_27;
-extern struct pmx_dev pmx_plgpio_28;
-extern struct pmx_dev pmx_plgpio_29;
-extern struct pmx_dev pmx_plgpio_30;
-extern struct pmx_dev pmx_plgpio_31;
-extern struct pmx_dev pmx_plgpio_32;
-extern struct pmx_dev pmx_plgpio_33;
-extern struct pmx_dev pmx_plgpio_34_36;
-extern struct pmx_dev pmx_plgpio_37_42;
-extern struct pmx_dev pmx_plgpio_43_44_47_48;
-extern struct pmx_dev pmx_plgpio_45_46_49_50;
+extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
+extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
+extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
+extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
+extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
+extern struct pmx_dev spear3xx_pmx_plgpio_28;
+extern struct pmx_dev spear3xx_pmx_plgpio_29;
+extern struct pmx_dev spear3xx_pmx_plgpio_30;
+extern struct pmx_dev spear3xx_pmx_plgpio_31;
+extern struct pmx_dev spear3xx_pmx_plgpio_32;
+extern struct pmx_dev spear3xx_pmx_plgpio_33;
+extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
+extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
+extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
+extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
 #endif
 
-extern struct pmx_driver pmx_driver;
-
 /* spear300 declarations */
 #ifdef CONFIG_MACH_SPEAR300
 /* Add spear300 machine device structure declarations here */
-extern struct amba_device gpio1_device;
+extern struct amba_device spear300_gpio1_device;
 
 /* pad mux modes */
-extern struct pmx_mode nand_mode;
-extern struct pmx_mode nor_mode;
-extern struct pmx_mode photo_frame_mode;
-extern struct pmx_mode lend_ip_phone_mode;
-extern struct pmx_mode hend_ip_phone_mode;
-extern struct pmx_mode lend_wifi_phone_mode;
-extern struct pmx_mode hend_wifi_phone_mode;
-extern struct pmx_mode ata_pabx_wi2s_mode;
-extern struct pmx_mode ata_pabx_i2s_mode;
-extern struct pmx_mode caml_lcdw_mode;
-extern struct pmx_mode camu_lcd_mode;
-extern struct pmx_mode camu_wlcd_mode;
-extern struct pmx_mode caml_lcd_mode;
+extern struct pmx_mode spear300_nand_mode;
+extern struct pmx_mode spear300_nor_mode;
+extern struct pmx_mode spear300_photo_frame_mode;
+extern struct pmx_mode spear300_lend_ip_phone_mode;
+extern struct pmx_mode spear300_hend_ip_phone_mode;
+extern struct pmx_mode spear300_lend_wifi_phone_mode;
+extern struct pmx_mode spear300_hend_wifi_phone_mode;
+extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
+extern struct pmx_mode spear300_ata_pabx_i2s_mode;
+extern struct pmx_mode spear300_caml_lcdw_mode;
+extern struct pmx_mode spear300_camu_lcd_mode;
+extern struct pmx_mode spear300_camu_wlcd_mode;
+extern struct pmx_mode spear300_caml_lcd_mode;
 
 /* pad mux devices */
-extern struct pmx_dev pmx_fsmc_2_chips;
-extern struct pmx_dev pmx_fsmc_4_chips;
-extern struct pmx_dev pmx_keyboard;
-extern struct pmx_dev pmx_clcd;
-extern struct pmx_dev pmx_telecom_gpio;
-extern struct pmx_dev pmx_telecom_tdm;
-extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk;
-extern struct pmx_dev pmx_telecom_camera;
-extern struct pmx_dev pmx_telecom_dac;
-extern struct pmx_dev pmx_telecom_i2s;
-extern struct pmx_dev pmx_telecom_boot_pins;
-extern struct pmx_dev pmx_telecom_sdhci_4bit;
-extern struct pmx_dev pmx_telecom_sdhci_8bit;
-extern struct pmx_dev pmx_gpio1;
+extern struct pmx_dev spear300_pmx_fsmc_2_chips;
+extern struct pmx_dev spear300_pmx_fsmc_4_chips;
+extern struct pmx_dev spear300_pmx_keyboard;
+extern struct pmx_dev spear300_pmx_clcd;
+extern struct pmx_dev spear300_pmx_telecom_gpio;
+extern struct pmx_dev spear300_pmx_telecom_tdm;
+extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
+extern struct pmx_dev spear300_pmx_telecom_camera;
+extern struct pmx_dev spear300_pmx_telecom_dac;
+extern struct pmx_dev spear300_pmx_telecom_i2s;
+extern struct pmx_dev spear300_pmx_telecom_boot_pins;
+extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
+extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
+extern struct pmx_dev spear300_pmx_gpio1;
 
 /* Add spear300 machine function declarations here */
-void __init spear300_init(void);
+void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
+		u8 pmx_dev_count);
 
 #endif /* CONFIG_MACH_SPEAR300 */
 
@@ -143,17 +142,18 @@ void __init spear300_init(void);
 /* Add spear310 machine device structure declarations here */
 
 /* pad mux devices */
-extern struct pmx_dev pmx_emi_cs_0_1_4_5;
-extern struct pmx_dev pmx_emi_cs_2_3;
-extern struct pmx_dev pmx_uart1;
-extern struct pmx_dev pmx_uart2;
-extern struct pmx_dev pmx_uart3_4_5;
-extern struct pmx_dev pmx_fsmc;
-extern struct pmx_dev pmx_rs485_0_1;
-extern struct pmx_dev pmx_tdm0;
+extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
+extern struct pmx_dev spear310_pmx_emi_cs_2_3;
+extern struct pmx_dev spear310_pmx_uart1;
+extern struct pmx_dev spear310_pmx_uart2;
+extern struct pmx_dev spear310_pmx_uart3_4_5;
+extern struct pmx_dev spear310_pmx_fsmc;
+extern struct pmx_dev spear310_pmx_rs485_0_1;
+extern struct pmx_dev spear310_pmx_tdm0;
 
 /* Add spear310 machine function declarations here */
-void __init spear310_init(void);
+void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
+		u8 pmx_dev_count);
 
 #endif /* CONFIG_MACH_SPEAR310 */
 
@@ -162,37 +162,38 @@ void __init spear310_init(void);
 /* Add spear320 machine device structure declarations here */
 
 /* pad mux modes */
-extern struct pmx_mode auto_net_smii_mode;
-extern struct pmx_mode auto_net_mii_mode;
-extern struct pmx_mode auto_exp_mode;
-extern struct pmx_mode small_printers_mode;
+extern struct pmx_mode spear320_auto_net_smii_mode;
+extern struct pmx_mode spear320_auto_net_mii_mode;
+extern struct pmx_mode spear320_auto_exp_mode;
+extern struct pmx_mode spear320_small_printers_mode;
 
 /* pad mux devices */
-extern struct pmx_dev pmx_clcd;
-extern struct pmx_dev pmx_emi;
-extern struct pmx_dev pmx_fsmc;
-extern struct pmx_dev pmx_spp;
-extern struct pmx_dev pmx_sdhci;
-extern struct pmx_dev pmx_i2s;
-extern struct pmx_dev pmx_uart1;
-extern struct pmx_dev pmx_uart1_modem;
-extern struct pmx_dev pmx_uart2;
-extern struct pmx_dev pmx_touchscreen;
-extern struct pmx_dev pmx_can;
-extern struct pmx_dev pmx_sdhci_led;
-extern struct pmx_dev pmx_pwm0;
-extern struct pmx_dev pmx_pwm1;
-extern struct pmx_dev pmx_pwm2;
-extern struct pmx_dev pmx_pwm3;
-extern struct pmx_dev pmx_ssp1;
-extern struct pmx_dev pmx_ssp2;
-extern struct pmx_dev pmx_mii1;
-extern struct pmx_dev pmx_smii0;
-extern struct pmx_dev pmx_smii1;
-extern struct pmx_dev pmx_i2c1;
+extern struct pmx_dev spear320_pmx_clcd;
+extern struct pmx_dev spear320_pmx_emi;
+extern struct pmx_dev spear320_pmx_fsmc;
+extern struct pmx_dev spear320_pmx_spp;
+extern struct pmx_dev spear320_pmx_sdhci;
+extern struct pmx_dev spear320_pmx_i2s;
+extern struct pmx_dev spear320_pmx_uart1;
+extern struct pmx_dev spear320_pmx_uart1_modem;
+extern struct pmx_dev spear320_pmx_uart2;
+extern struct pmx_dev spear320_pmx_touchscreen;
+extern struct pmx_dev spear320_pmx_can;
+extern struct pmx_dev spear320_pmx_sdhci_led;
+extern struct pmx_dev spear320_pmx_pwm0;
+extern struct pmx_dev spear320_pmx_pwm1;
+extern struct pmx_dev spear320_pmx_pwm2;
+extern struct pmx_dev spear320_pmx_pwm3;
+extern struct pmx_dev spear320_pmx_ssp1;
+extern struct pmx_dev spear320_pmx_ssp2;
+extern struct pmx_dev spear320_pmx_mii1;
+extern struct pmx_dev spear320_pmx_smii0;
+extern struct pmx_dev spear320_pmx_smii1;
+extern struct pmx_dev spear320_pmx_i2c1;
 
 /* Add spear320 machine function declarations here */
-void __init spear320_init(void);
+void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
+		u8 pmx_dev_count);
 
 #endif /* CONFIG_MACH_SPEAR320 */
 

arch/arm/mach-spear3xx/include/mach/irqs.h

@@ -15,138 +15,140 @@
 #define __MACH_IRQS_H
 
 /* SPEAr3xx IRQ definitions */
-#define IRQ_HW_ACCEL_MOD_0			0
-#define IRQ_INTRCOMM_RAS_ARM			1
-#define IRQ_CPU_GPT1_1				2
-#define IRQ_CPU_GPT1_2				3
-#define IRQ_BASIC_GPT1_1			4
-#define IRQ_BASIC_GPT1_2			5
-#define IRQ_BASIC_GPT2_1			6
-#define IRQ_BASIC_GPT2_2			7
-#define IRQ_BASIC_DMA				8
-#define IRQ_BASIC_SMI				9
-#define IRQ_BASIC_RTC				10
-#define IRQ_BASIC_GPIO				11
-#define IRQ_BASIC_WDT				12
-#define IRQ_DDR_CONTROLLER			13
-#define IRQ_SYS_ERROR				14
-#define IRQ_WAKEUP_RCV				15
-#define IRQ_JPEG				16
-#define IRQ_IRDA				17
-#define IRQ_ADC					18
-#define IRQ_UART				19
-#define IRQ_SSP					20
-#define IRQ_I2C					21
-#define IRQ_MAC_1				22
-#define IRQ_MAC_2				23
-#define IRQ_USB_DEV				24
-#define IRQ_USB_H_OHCI_0			25
-#define IRQ_USB_H_EHCI_0			26
-#define IRQ_USB_H_EHCI_1			IRQ_USB_H_EHCI_0
-#define IRQ_USB_H_OHCI_1			27
-#define IRQ_GEN_RAS_1				28
-#define IRQ_GEN_RAS_2				29
-#define IRQ_GEN_RAS_3				30
-#define IRQ_HW_ACCEL_MOD_1			31
-#define IRQ_VIC_END				32
-
-#define VIRQ_START				IRQ_VIC_END
+#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0		0
+#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM		1
+#define SPEAR3XX_IRQ_CPU_GPT1_1			2
+#define SPEAR3XX_IRQ_CPU_GPT1_2			3
+#define SPEAR3XX_IRQ_BASIC_GPT1_1		4
+#define SPEAR3XX_IRQ_BASIC_GPT1_2		5
+#define SPEAR3XX_IRQ_BASIC_GPT2_1		6
+#define SPEAR3XX_IRQ_BASIC_GPT2_2		7
+#define SPEAR3XX_IRQ_BASIC_DMA			8
+#define SPEAR3XX_IRQ_BASIC_SMI			9
+#define SPEAR3XX_IRQ_BASIC_RTC			10
+#define SPEAR3XX_IRQ_BASIC_GPIO			11
+#define SPEAR3XX_IRQ_BASIC_WDT			12
+#define SPEAR3XX_IRQ_DDR_CONTROLLER		13
+#define SPEAR3XX_IRQ_SYS_ERROR			14
+#define SPEAR3XX_IRQ_WAKEUP_RCV			15
+#define SPEAR3XX_IRQ_JPEG			16
+#define SPEAR3XX_IRQ_IRDA			17
+#define SPEAR3XX_IRQ_ADC			18
+#define SPEAR3XX_IRQ_UART			19
+#define SPEAR3XX_IRQ_SSP			20
+#define SPEAR3XX_IRQ_I2C			21
+#define SPEAR3XX_IRQ_MAC_1			22
+#define SPEAR3XX_IRQ_MAC_2			23
+#define SPEAR3XX_IRQ_USB_DEV			24
+#define SPEAR3XX_IRQ_USB_H_OHCI_0		25
+#define SPEAR3XX_IRQ_USB_H_EHCI_0		26
+#define SPEAR3XX_IRQ_USB_H_EHCI_1		SPEAR3XX_IRQ_USB_H_EHCI_0
+#define SPEAR3XX_IRQ_USB_H_OHCI_1		27
+#define SPEAR3XX_IRQ_GEN_RAS_1			28
+#define SPEAR3XX_IRQ_GEN_RAS_2			29
+#define SPEAR3XX_IRQ_GEN_RAS_3			30
+#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1		31
+#define SPEAR3XX_IRQ_VIC_END			32
+
+#define SPEAR3XX_VIRQ_START			SPEAR3XX_IRQ_VIC_END
 
 /* SPEAr300 Virtual irq definitions */
-#ifdef CONFIG_MACH_SPEAR300
 /* IRQs sharing IRQ_GEN_RAS_1 */
-#define VIRQ_IT_PERS_S				(VIRQ_START + 0)
-#define VIRQ_IT_CHANGE_S			(VIRQ_START + 1)
-#define VIRQ_I2S				(VIRQ_START + 2)
-#define VIRQ_TDM				(VIRQ_START + 3)
-#define VIRQ_CAMERA_L				(VIRQ_START + 4)
-#define VIRQ_CAMERA_F				(VIRQ_START + 5)
-#define VIRQ_CAMERA_V				(VIRQ_START + 6)
-#define VIRQ_KEYBOARD				(VIRQ_START + 7)
-#define VIRQ_GPIO1				(VIRQ_START + 8)
+#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
 
 /* IRQs sharing IRQ_GEN_RAS_3 */
-#define IRQ_CLCD				IRQ_GEN_RAS_3
+#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
 
 /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define IRQ_SDHCI				IRQ_INTRCOMM_RAS_ARM
-
-/* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 9)
-#define SPEAR_GPIO1_INT_BASE			(SPEAR_GPIO_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END			(SPEAR_GPIO1_INT_BASE + 8)
+#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
 
 /* SPEAr310 Virtual irq definitions */
-#elif defined(CONFIG_MACH_SPEAR310)
 /* IRQs sharing IRQ_GEN_RAS_1 */
-#define VIRQ_SMII0				(VIRQ_START + 0)
-#define VIRQ_SMII1				(VIRQ_START + 1)
-#define VIRQ_SMII2				(VIRQ_START + 2)
-#define VIRQ_SMII3				(VIRQ_START + 3)
-#define VIRQ_WAKEUP_SMII0			(VIRQ_START + 4)
-#define VIRQ_WAKEUP_SMII1			(VIRQ_START + 5)
-#define VIRQ_WAKEUP_SMII2			(VIRQ_START + 6)
-#define VIRQ_WAKEUP_SMII3			(VIRQ_START + 7)
+#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
 
 /* IRQs sharing IRQ_GEN_RAS_2 */
-#define VIRQ_UART1				(VIRQ_START + 8)
-#define VIRQ_UART2				(VIRQ_START + 9)
-#define VIRQ_UART3				(VIRQ_START + 10)
-#define VIRQ_UART4				(VIRQ_START + 11)
-#define VIRQ_UART5				(VIRQ_START + 12)
+#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
 
 /* IRQs sharing IRQ_GEN_RAS_3 */
-#define VIRQ_EMI				(VIRQ_START + 13)
-#define VIRQ_PLGPIO				(VIRQ_START + 14)
+#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
 
 /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define VIRQ_TDM_HDLC				(VIRQ_START + 15)
-#define VIRQ_RS485_0				(VIRQ_START + 16)
-#define VIRQ_RS485_1				(VIRQ_START + 17)
-
-/* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 18)
+#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
+#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
 
 /* SPEAr320 Virtual irq definitions */
-#else
 /* IRQs sharing IRQ_GEN_RAS_1 */
-#define VIRQ_EMI				(VIRQ_START + 0)
-#define VIRQ_CLCD				(VIRQ_START + 1)
-#define VIRQ_SPP				(VIRQ_START + 2)
+#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
 
 /* IRQs sharing IRQ_GEN_RAS_2 */
-#define IRQ_SDHCI				IRQ_GEN_RAS_2
+#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
 
 /* IRQs sharing IRQ_GEN_RAS_3 */
-#define VIRQ_PLGPIO				(VIRQ_START + 3)
-#define VIRQ_I2S_PLAY				(VIRQ_START + 4)
-#define VIRQ_I2S_REC				(VIRQ_START + 5)
+#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
 
 /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define VIRQ_CANU				(VIRQ_START + 6)
-#define VIRQ_CANL				(VIRQ_START + 7)
-#define VIRQ_UART1				(VIRQ_START + 8)
-#define VIRQ_UART2				(VIRQ_START + 9)
-#define VIRQ_SSP1				(VIRQ_START + 10)
-#define VIRQ_SSP2				(VIRQ_START + 11)
-#define VIRQ_SMII0				(VIRQ_START + 12)
-#define VIRQ_MII1_SMII1				(VIRQ_START + 13)
-#define VIRQ_WAKEUP_SMII0			(VIRQ_START + 14)
-#define VIRQ_WAKEUP_MII1_SMII1			(VIRQ_START + 15)
-#define VIRQ_I2C				(VIRQ_START + 16)
-
-/* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 17)
+#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
+#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
+#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
 
+/*
+ * GPIO pins virtual irqs
+ * Use the lowest number for the GPIO virtual IRQs base on which subarchs
+ * we have compiled in
+ */
+#if defined(CONFIG_MACH_SPEAR310)
+#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 18)
+#elif defined(CONFIG_MACH_SPEAR320)
+#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 17)
+#else
+#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 9)
 #endif
 
-/* PLGPIO Virtual IRQs */
+#define SPEAR300_GPIO1_INT_BASE			(SPEAR3XX_GPIO_INT_BASE + 8)
+#define SPEAR3XX_PLGPIO_COUNT	102
+
 #if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR_PLGPIO_INT_BASE			(SPEAR_GPIO_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END			(SPEAR_PLGPIO_INT_BASE + 102)
+#define SPEAR3XX_PLGPIO_INT_BASE		(SPEAR3XX_GPIO_INT_BASE + 8)
+#define SPEAR3XX_GPIO_INT_END			(SPEAR3XX_PLGPIO_INT_BASE + \
+							SPEAR3XX_PLGPIO_COUNT)
+#else
+#define SPEAR3XX_GPIO_INT_END	(SPEAR300_GPIO1_INT_BASE + 8)
 #endif
 
-#define VIRQ_END				SPEAR_GPIO_INT_END
-#define NR_IRQS					VIRQ_END
+#define SPEAR3XX_VIRQ_END	SPEAR3XX_GPIO_INT_END
+#define NR_IRQS			SPEAR3XX_VIRQ_END
 
 #endif /* __MACH_IRQS_H */

arch/arm/mach-spear3xx/include/mach/spear300.h

@@ -20,19 +20,19 @@
 #define SPEAR300_TELECOM_BASE		UL(0x50000000)
 
 /* Interrupt registers offsets and masks */
-#define INT_ENB_MASK_REG		0x54
-#define INT_STS_MASK_REG		0x58
-#define IT_PERS_S_IRQ_MASK		(1 << 0)
-#define IT_CHANGE_S_IRQ_MASK		(1 << 1)
-#define I2S_IRQ_MASK			(1 << 2)
-#define TDM_IRQ_MASK			(1 << 3)
-#define CAMERA_L_IRQ_MASK		(1 << 4)
-#define CAMERA_F_IRQ_MASK		(1 << 5)
-#define CAMERA_V_IRQ_MASK		(1 << 6)
-#define KEYBOARD_IRQ_MASK		(1 << 7)
-#define GPIO1_IRQ_MASK			(1 << 8)
-
-#define SHIRQ_RAS1_MASK			0x1FF
+#define SPEAR300_INT_ENB_MASK_REG	0x54
+#define SPEAR300_INT_STS_MASK_REG	0x58
+#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
+#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
+#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
+#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
+#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
+#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
+#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
+#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
+#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
+
+#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
 
 #define SPEAR300_CLCD_BASE		UL(0x60000000)
 #define SPEAR300_SDHCI_BASE		UL(0x70000000)

arch/arm/mach-spear3xx/include/mach/spear310.h

@@ -29,29 +29,29 @@
 #define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
 
 /* Interrupt registers offsets and masks */
-#define INT_STS_MASK_REG		0x04
-#define SMII0_IRQ_MASK			(1 << 0)
-#define SMII1_IRQ_MASK			(1 << 1)
-#define SMII2_IRQ_MASK			(1 << 2)
-#define SMII3_IRQ_MASK			(1 << 3)
-#define WAKEUP_SMII0_IRQ_MASK		(1 << 4)
-#define WAKEUP_SMII1_IRQ_MASK		(1 << 5)
-#define WAKEUP_SMII2_IRQ_MASK		(1 << 6)
-#define WAKEUP_SMII3_IRQ_MASK		(1 << 7)
-#define UART1_IRQ_MASK			(1 << 8)
-#define UART2_IRQ_MASK			(1 << 9)
-#define UART3_IRQ_MASK			(1 << 10)
-#define UART4_IRQ_MASK			(1 << 11)
-#define UART5_IRQ_MASK			(1 << 12)
-#define EMI_IRQ_MASK			(1 << 13)
-#define TDM_HDLC_IRQ_MASK		(1 << 14)
-#define RS485_0_IRQ_MASK		(1 << 15)
-#define RS485_1_IRQ_MASK		(1 << 16)
+#define SPEAR310_INT_STS_MASK_REG	0x04
+#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
+#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
+#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
+#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
+#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
+#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
+#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
+#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
+#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
+#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
+#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
+#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
+#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
+#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
+#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
+#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
+#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
 
-#define SHIRQ_RAS1_MASK			0x000FF
-#define SHIRQ_RAS2_MASK			0x01F00
-#define SHIRQ_RAS3_MASK			0x02000
-#define SHIRQ_INTRCOMM_RAS_MASK		0x1C000
+#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
+#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
+#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
+#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
 
 #endif /* __MACH_SPEAR310_H */
 

arch/arm/mach-spear3xx/include/mach/spear320.h

@@ -36,31 +36,31 @@
 #define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
 
 /* Interrupt registers offsets and masks */
-#define INT_STS_MASK_REG		0x04
-#define INT_CLR_MASK_REG		0x04
-#define INT_ENB_MASK_REG		0x08
-#define GPIO_IRQ_MASK			(1 << 0)
-#define I2S_PLAY_IRQ_MASK		(1 << 1)
-#define I2S_REC_IRQ_MASK		(1 << 2)
-#define EMI_IRQ_MASK			(1 << 7)
-#define CLCD_IRQ_MASK			(1 << 8)
-#define SPP_IRQ_MASK			(1 << 9)
-#define SDHCI_IRQ_MASK			(1 << 10)
-#define CAN_U_IRQ_MASK			(1 << 11)
-#define CAN_L_IRQ_MASK			(1 << 12)
-#define UART1_IRQ_MASK			(1 << 13)
-#define UART2_IRQ_MASK			(1 << 14)
-#define SSP1_IRQ_MASK			(1 << 15)
-#define SSP2_IRQ_MASK			(1 << 16)
-#define SMII0_IRQ_MASK			(1 << 17)
-#define MII1_SMII1_IRQ_MASK		(1 << 18)
-#define WAKEUP_SMII0_IRQ_MASK		(1 << 19)
-#define WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
-#define I2C1_IRQ_MASK			(1 << 21)
+#define SPEAR320_INT_STS_MASK_REG		0x04
+#define SPEAR320_INT_CLR_MASK_REG		0x04
+#define SPEAR320_INT_ENB_MASK_REG		0x08
+#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
+#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
+#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
+#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
+#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
+#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
+#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
+#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
+#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
+#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
+#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
+#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
+#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
+#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
+#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
+#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
+#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
+#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
 
-#define SHIRQ_RAS1_MASK			0x000380
-#define SHIRQ_RAS3_MASK			0x000007
-#define SHIRQ_INTRCOMM_RAS_MASK		0x3FF800
+#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
+#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
+#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
 
 #endif /* __MACH_SPEAR320_H */
 

arch/arm/mach-spear3xx/spear300.c

@@ -40,86 +40,86 @@
 #define CAML_LCD_MODE			(1 << 12)
 #define ALL_MODES			0x1FFF
 
-struct pmx_mode nand_mode = {
+struct pmx_mode spear300_nand_mode = {
 	.id = NAND_MODE,
 	.name = "nand mode",
 	.mask = 0x00,
 };
 
-struct pmx_mode nor_mode = {
+struct pmx_mode spear300_nor_mode = {
 	.id = NOR_MODE,
 	.name = "nor mode",
 	.mask = 0x01,
 };
 
-struct pmx_mode photo_frame_mode = {
+struct pmx_mode spear300_photo_frame_mode = {
 	.id = PHOTO_FRAME_MODE,
 	.name = "photo frame mode",
 	.mask = 0x02,
 };
 
-struct pmx_mode lend_ip_phone_mode = {
+struct pmx_mode spear300_lend_ip_phone_mode = {
 	.id = LEND_IP_PHONE_MODE,
 	.name = "lend ip phone mode",
 	.mask = 0x03,
 };
 
-struct pmx_mode hend_ip_phone_mode = {
+struct pmx_mode spear300_hend_ip_phone_mode = {
 	.id = HEND_IP_PHONE_MODE,
 	.name = "hend ip phone mode",
 	.mask = 0x04,
 };
 
-struct pmx_mode lend_wifi_phone_mode = {
+struct pmx_mode spear300_lend_wifi_phone_mode = {
 	.id = LEND_WIFI_PHONE_MODE,
 	.name = "lend wifi phone mode",
 	.mask = 0x05,
 };
 
-struct pmx_mode hend_wifi_phone_mode = {
+struct pmx_mode spear300_hend_wifi_phone_mode = {
 	.id = HEND_WIFI_PHONE_MODE,
 	.name = "hend wifi phone mode",
 	.mask = 0x06,
 };
 
-struct pmx_mode ata_pabx_wi2s_mode = {
+struct pmx_mode spear300_ata_pabx_wi2s_mode = {
 	.id = ATA_PABX_WI2S_MODE,
 	.name = "ata pabx wi2s mode",
 	.mask = 0x07,
 };
 
-struct pmx_mode ata_pabx_i2s_mode = {
+struct pmx_mode spear300_ata_pabx_i2s_mode = {
 	.id = ATA_PABX_I2S_MODE,
 	.name = "ata pabx i2s mode",
 	.mask = 0x08,
 };
 
-struct pmx_mode caml_lcdw_mode = {
+struct pmx_mode spear300_caml_lcdw_mode = {
 	.id = CAML_LCDW_MODE,
 	.name = "caml lcdw mode",
 	.mask = 0x0C,
 };
 
-struct pmx_mode camu_lcd_mode = {
+struct pmx_mode spear300_camu_lcd_mode = {
 	.id = CAMU_LCD_MODE,
 	.name = "camu lcd mode",
 	.mask = 0x0D,
 };
 
-struct pmx_mode camu_wlcd_mode = {
+struct pmx_mode spear300_camu_wlcd_mode = {
 	.id = CAMU_WLCD_MODE,
 	.name = "camu wlcd mode",
 	.mask = 0x0E,
 };
 
-struct pmx_mode caml_lcd_mode = {
+struct pmx_mode spear300_caml_lcd_mode = {
 	.id = CAML_LCD_MODE,
 	.name = "caml lcd mode",
 	.mask = 0x0F,
 };
 
 /* devices */
-struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
+static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
 	{
 		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
 			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
@@ -127,14 +127,14 @@ struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_fsmc_2_chips = {
+struct pmx_dev spear300_pmx_fsmc_2_chips = {
 	.name = "fsmc_2_chips",
 	.modes = pmx_fsmc_2_chips_modes,
 	.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
+static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
 	{
 		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
 			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
@@ -142,14 +142,14 @@ struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_fsmc_4_chips = {
+struct pmx_dev spear300_pmx_fsmc_4_chips = {
 	.name = "fsmc_4_chips",
 	.modes = pmx_fsmc_4_chips_modes,
 	.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_keyboard_modes[] = {
+static struct pmx_dev_mode pmx_keyboard_modes[] = {
 	{
 		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
 			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
@@ -159,14 +159,14 @@ struct pmx_dev_mode pmx_keyboard_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_keyboard = {
+struct pmx_dev spear300_pmx_keyboard = {
 	.name = "keyboard",
 	.modes = pmx_keyboard_modes,
 	.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_clcd_modes[] = {
+static struct pmx_dev_mode pmx_clcd_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE,
 		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
@@ -177,14 +177,14 @@ struct pmx_dev_mode pmx_clcd_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_clcd = {
+struct pmx_dev spear300_pmx_clcd = {
 	.name = "clcd",
 	.modes = pmx_clcd_modes,
 	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
+static struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
 		.mask = PMX_MII_MASK,
@@ -204,14 +204,14 @@ struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_gpio = {
+struct pmx_dev spear300_pmx_telecom_gpio = {
 	.name = "telecom_gpio",
 	.modes = pmx_telecom_gpio_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
+static struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
 			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
@@ -222,14 +222,14 @@ struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_tdm = {
+struct pmx_dev spear300_pmx_telecom_tdm = {
 	.name = "telecom_tdm",
 	.modes = pmx_telecom_tdm_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
+static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
 	{
 		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
 			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
@@ -239,14 +239,14 @@ struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_spi_cs_i2c_clk = {
+struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = {
 	.name = "telecom_spi_cs_i2c_clk",
 	.modes = pmx_telecom_spi_cs_i2c_clk_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_camera_modes[] = {
+static struct pmx_dev_mode pmx_telecom_camera_modes[] = {
 	{
 		.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
 		.mask = PMX_MII_MASK,
@@ -256,14 +256,14 @@ struct pmx_dev_mode pmx_telecom_camera_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_camera = {
+struct pmx_dev spear300_pmx_telecom_camera = {
 	.name = "telecom_camera",
 	.modes = pmx_telecom_camera_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_dac_modes[] = {
+static struct pmx_dev_mode pmx_telecom_dac_modes[] = {
 	{
 		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
 			| CAMU_WLCD_MODE | CAML_LCD_MODE,
@@ -271,14 +271,14 @@ struct pmx_dev_mode pmx_telecom_dac_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_dac = {
+struct pmx_dev spear300_pmx_telecom_dac = {
 	.name = "telecom_dac",
 	.modes = pmx_telecom_dac_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
+static struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
 	{
 		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
 			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
@@ -288,14 +288,14 @@ struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_i2s = {
+struct pmx_dev spear300_pmx_telecom_i2s = {
 	.name = "telecom_i2s",
 	.modes = pmx_telecom_i2s_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
+static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
 	{
 		.ids = NAND_MODE | NOR_MODE,
 		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
@@ -303,14 +303,14 @@ struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_boot_pins = {
+struct pmx_dev spear300_pmx_telecom_boot_pins = {
 	.name = "telecom_boot_pins",
 	.modes = pmx_telecom_boot_pins_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
+static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
 			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -323,14 +323,14 @@ struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_sdhci_4bit = {
+struct pmx_dev spear300_pmx_telecom_sdhci_4bit = {
 	.name = "telecom_sdhci_4bit",
 	.modes = pmx_telecom_sdhci_4bit_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
+static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
 			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -342,14 +342,14 @@ struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_sdhci_8bit = {
+struct pmx_dev spear300_pmx_telecom_sdhci_8bit = {
 	.name = "telecom_sdhci_8bit",
 	.modes = pmx_telecom_sdhci_8bit_modes,
 	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_gpio1_modes[] = {
+static struct pmx_dev_mode pmx_gpio1_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE,
 		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
@@ -357,7 +357,7 @@ struct pmx_dev_mode pmx_gpio1_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_gpio1 = {
+struct pmx_dev spear300_pmx_gpio1 = {
 	.name = "arm gpio1",
 	.modes = pmx_gpio1_modes,
 	.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
@@ -365,60 +365,60 @@ struct pmx_dev pmx_gpio1 = {
 };
 
 /* pmx driver structure */
-struct pmx_driver pmx_driver = {
+static struct pmx_driver pmx_driver = {
 	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
 	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
 };
 
 /* spear3xx shared irq */
-struct shirq_dev_config shirq_ras1_config[] = {
+static struct shirq_dev_config shirq_ras1_config[] = {
 	{
-		.virq = VIRQ_IT_PERS_S,
-		.enb_mask = IT_PERS_S_IRQ_MASK,
-		.status_mask = IT_PERS_S_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_IT_PERS_S,
+		.enb_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
+		.status_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
 	}, {
-		.virq = VIRQ_IT_CHANGE_S,
-		.enb_mask = IT_CHANGE_S_IRQ_MASK,
-		.status_mask = IT_CHANGE_S_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_IT_CHANGE_S,
+		.enb_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
+		.status_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
 	}, {
-		.virq = VIRQ_I2S,
-		.enb_mask = I2S_IRQ_MASK,
-		.status_mask = I2S_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_I2S,
+		.enb_mask = SPEAR300_I2S_IRQ_MASK,
+		.status_mask = SPEAR300_I2S_IRQ_MASK,
 	}, {
-		.virq = VIRQ_TDM,
-		.enb_mask = TDM_IRQ_MASK,
-		.status_mask = TDM_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_TDM,
+		.enb_mask = SPEAR300_TDM_IRQ_MASK,
+		.status_mask = SPEAR300_TDM_IRQ_MASK,
 	}, {
-		.virq = VIRQ_CAMERA_L,
-		.enb_mask = CAMERA_L_IRQ_MASK,
-		.status_mask = CAMERA_L_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_CAMERA_L,
+		.enb_mask = SPEAR300_CAMERA_L_IRQ_MASK,
+		.status_mask = SPEAR300_CAMERA_L_IRQ_MASK,
 	}, {
-		.virq = VIRQ_CAMERA_F,
-		.enb_mask = CAMERA_F_IRQ_MASK,
-		.status_mask = CAMERA_F_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_CAMERA_F,
+		.enb_mask = SPEAR300_CAMERA_F_IRQ_MASK,
+		.status_mask = SPEAR300_CAMERA_F_IRQ_MASK,
 	}, {
-		.virq = VIRQ_CAMERA_V,
-		.enb_mask = CAMERA_V_IRQ_MASK,
-		.status_mask = CAMERA_V_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_CAMERA_V,
+		.enb_mask = SPEAR300_CAMERA_V_IRQ_MASK,
+		.status_mask = SPEAR300_CAMERA_V_IRQ_MASK,
 	}, {
-		.virq = VIRQ_KEYBOARD,
-		.enb_mask = KEYBOARD_IRQ_MASK,
-		.status_mask = KEYBOARD_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_KEYBOARD,
+		.enb_mask = SPEAR300_KEYBOARD_IRQ_MASK,
+		.status_mask = SPEAR300_KEYBOARD_IRQ_MASK,
 	}, {
-		.virq = VIRQ_GPIO1,
-		.enb_mask = GPIO1_IRQ_MASK,
-		.status_mask = GPIO1_IRQ_MASK,
+		.virq = SPEAR300_VIRQ_GPIO1,
+		.enb_mask = SPEAR300_GPIO1_IRQ_MASK,
+		.status_mask = SPEAR300_GPIO1_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_ras1 = {
-	.irq = IRQ_GEN_RAS_1,
+static struct spear_shirq shirq_ras1 = {
+	.irq = SPEAR3XX_IRQ_GEN_RAS_1,
 	.dev_config = shirq_ras1_config,
 	.dev_count = ARRAY_SIZE(shirq_ras1_config),
 	.regs = {
-		.enb_reg = INT_ENB_MASK_REG,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.enb_reg = SPEAR300_INT_ENB_MASK_REG,
+		.status_reg = SPEAR300_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR300_SHIRQ_RAS1_MASK,
 		.clear_reg = -1,
 	},
 };
@@ -427,10 +427,10 @@ struct spear_shirq shirq_ras1 = {
 /* arm gpio1 device registration */
 static struct pl061_platform_data gpio1_plat_data = {
 	.gpio_base	= 8,
-	.irq_base	= SPEAR_GPIO1_INT_BASE,
+	.irq_base	= SPEAR300_GPIO1_INT_BASE,
 };
 
-struct amba_device gpio1_device = {
+struct amba_device spear300_gpio1_device = {
 	.dev = {
 		.init_name = "gpio1",
 		.platform_data = &gpio1_plat_data,
@@ -440,11 +440,12 @@ struct amba_device gpio1_device = {
 		.end = SPEAR300_GPIO_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
-	.irq = {VIRQ_GPIO1, NO_IRQ},
+	.irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
 };
 
 /* spear300 routines */
-void __init spear300_init(void)
+void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
+		u8 pmx_dev_count)
 {
 	int ret = 0;
 
@@ -460,6 +461,10 @@ void __init spear300_init(void)
 	}
 
 	/* pmx initialization */
+	pmx_driver.mode = pmx_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = pmx_dev_count;
+
 	pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
 	if (pmx_driver.base) {
 		ret = pmx_register(&pmx_driver);

arch/arm/mach-spear3xx/spear300_evb.c

@@ -19,26 +19,26 @@
 /* padmux devices to enable */
 static struct pmx_dev *pmx_devs[] = {
 	/* spear3xx specific devices */
-	&pmx_i2c,
-	&pmx_ssp_cs,
-	&pmx_ssp,
-	&pmx_mii,
-	&pmx_uart0,
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp_cs,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_mii,
+	&spear3xx_pmx_uart0,
 
 	/* spear300 specific devices */
-	&pmx_fsmc_2_chips,
-	&pmx_clcd,
-	&pmx_telecom_sdhci_4bit,
-	&pmx_gpio1,
+	&spear300_pmx_fsmc_2_chips,
+	&spear300_pmx_clcd,
+	&spear300_pmx_telecom_sdhci_4bit,
+	&spear300_pmx_gpio1,
 };
 
 static struct amba_device *amba_devs[] __initdata = {
 	/* spear3xx specific devices */
-	&gpio_device,
-	&uart_device,
+	&spear3xx_gpio_device,
+	&spear3xx_uart_device,
 
 	/* spear300 specific devices */
-	&gpio1_device,
+	&spear300_gpio1_device,
 };
 
 static struct platform_device *plat_devs[] __initdata = {
@@ -51,13 +51,9 @@ static void __init spear300_evb_init(void)
 {
 	unsigned int i;
 
-	/* padmux initialization, must be done before spear300_init */
-	pmx_driver.mode = &photo_frame_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
-
 	/* call spear300 machine init function */
-	spear300_init();
+	spear300_init(&spear300_photo_frame_mode, pmx_devs,
+			ARRAY_SIZE(pmx_devs));
 
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));

arch/arm/mach-spear3xx/spear310.c

@@ -22,112 +22,112 @@
 #define PAD_MUX_CONFIG_REG	0x08
 
 /* devices */
-struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
+static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_TIMER_3_4_MASK,
 	},
 };
 
-struct pmx_dev pmx_emi_cs_0_1_4_5 = {
+struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
 	.name = "emi_cs_0_1_4_5",
 	.modes = pmx_emi_cs_0_1_4_5_modes,
 	.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
+static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_TIMER_1_2_MASK,
 	},
 };
 
-struct pmx_dev pmx_emi_cs_2_3 = {
+struct pmx_dev spear310_pmx_emi_cs_2_3 = {
 	.name = "emi_cs_2_3",
 	.modes = pmx_emi_cs_2_3_modes,
 	.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_uart1_modes[] = {
+static struct pmx_dev_mode pmx_uart1_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_FIRDA_MASK,
 	},
 };
 
-struct pmx_dev pmx_uart1 = {
+struct pmx_dev spear310_pmx_uart1 = {
 	.name = "uart1",
 	.modes = pmx_uart1_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_uart2_modes[] = {
+static struct pmx_dev_mode pmx_uart2_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_TIMER_1_2_MASK,
 	},
 };
 
-struct pmx_dev pmx_uart2 = {
+struct pmx_dev spear310_pmx_uart2 = {
 	.name = "uart2",
 	.modes = pmx_uart2_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
+static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_UART0_MODEM_MASK,
 	},
 };
 
-struct pmx_dev pmx_uart3_4_5 = {
+struct pmx_dev spear310_pmx_uart3_4_5 = {
 	.name = "uart3_4_5",
 	.modes = pmx_uart3_4_5_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_fsmc_modes[] = {
+static struct pmx_dev_mode pmx_fsmc_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_SSP_CS_MASK,
 	},
 };
 
-struct pmx_dev pmx_fsmc = {
+struct pmx_dev spear310_pmx_fsmc = {
 	.name = "fsmc",
 	.modes = pmx_fsmc_modes,
 	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
+static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_rs485_0_1 = {
+struct pmx_dev spear310_pmx_rs485_0_1 = {
 	.name = "rs485_0_1",
 	.modes = pmx_rs485_0_1_modes,
 	.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_tdm0_modes[] = {
+static struct pmx_dev_mode pmx_tdm0_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_tdm0 = {
+struct pmx_dev spear310_pmx_tdm0 = {
 	.name = "tdm0",
 	.modes = pmx_tdm0_modes,
 	.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
@@ -135,122 +135,122 @@ struct pmx_dev pmx_tdm0 = {
 };
 
 /* pmx driver structure */
-struct pmx_driver pmx_driver = {
+static struct pmx_driver pmx_driver = {
 	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
 };
 
 /* spear3xx shared irq */
-struct shirq_dev_config shirq_ras1_config[] = {
+static struct shirq_dev_config shirq_ras1_config[] = {
 	{
-		.virq = VIRQ_SMII0,
-		.status_mask = SMII0_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_SMII0,
+		.status_mask = SPEAR310_SMII0_IRQ_MASK,
 	}, {
-		.virq = VIRQ_SMII1,
-		.status_mask = SMII1_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_SMII1,
+		.status_mask = SPEAR310_SMII1_IRQ_MASK,
 	}, {
-		.virq = VIRQ_SMII2,
-		.status_mask = SMII2_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_SMII2,
+		.status_mask = SPEAR310_SMII2_IRQ_MASK,
 	}, {
-		.virq = VIRQ_SMII3,
-		.status_mask = SMII3_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_SMII3,
+		.status_mask = SPEAR310_SMII3_IRQ_MASK,
 	}, {
-		.virq = VIRQ_WAKEUP_SMII0,
-		.status_mask = WAKEUP_SMII0_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_WAKEUP_SMII0,
+		.status_mask = SPEAR310_WAKEUP_SMII0_IRQ_MASK,
 	}, {
-		.virq = VIRQ_WAKEUP_SMII1,
-		.status_mask = WAKEUP_SMII1_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_WAKEUP_SMII1,
+		.status_mask = SPEAR310_WAKEUP_SMII1_IRQ_MASK,
 	}, {
-		.virq = VIRQ_WAKEUP_SMII2,
-		.status_mask = WAKEUP_SMII2_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_WAKEUP_SMII2,
+		.status_mask = SPEAR310_WAKEUP_SMII2_IRQ_MASK,
 	}, {
-		.virq = VIRQ_WAKEUP_SMII3,
-		.status_mask = WAKEUP_SMII3_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_WAKEUP_SMII3,
+		.status_mask = SPEAR310_WAKEUP_SMII3_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_ras1 = {
-	.irq = IRQ_GEN_RAS_1,
+static struct spear_shirq shirq_ras1 = {
+	.irq = SPEAR3XX_IRQ_GEN_RAS_1,
 	.dev_config = shirq_ras1_config,
 	.dev_count = ARRAY_SIZE(shirq_ras1_config),
 	.regs = {
 		.enb_reg = -1,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.status_reg = SPEAR310_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR310_SHIRQ_RAS1_MASK,
 		.clear_reg = -1,
 	},
 };
 
-struct shirq_dev_config shirq_ras2_config[] = {
+static struct shirq_dev_config shirq_ras2_config[] = {
 	{
-		.virq = VIRQ_UART1,
-		.status_mask = UART1_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_UART1,
+		.status_mask = SPEAR310_UART1_IRQ_MASK,
 	}, {
-		.virq = VIRQ_UART2,
-		.status_mask = UART2_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_UART2,
+		.status_mask = SPEAR310_UART2_IRQ_MASK,
 	}, {
-		.virq = VIRQ_UART3,
-		.status_mask = UART3_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_UART3,
+		.status_mask = SPEAR310_UART3_IRQ_MASK,
 	}, {
-		.virq = VIRQ_UART4,
-		.status_mask = UART4_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_UART4,
+		.status_mask = SPEAR310_UART4_IRQ_MASK,
 	}, {
-		.virq = VIRQ_UART5,
-		.status_mask = UART5_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_UART5,
+		.status_mask = SPEAR310_UART5_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_ras2 = {
-	.irq = IRQ_GEN_RAS_2,
+static struct spear_shirq shirq_ras2 = {
+	.irq = SPEAR3XX_IRQ_GEN_RAS_2,
 	.dev_config = shirq_ras2_config,
 	.dev_count = ARRAY_SIZE(shirq_ras2_config),
 	.regs = {
 		.enb_reg = -1,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_RAS2_MASK,
+		.status_reg = SPEAR310_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR310_SHIRQ_RAS2_MASK,
 		.clear_reg = -1,
 	},
 };
 
-struct shirq_dev_config shirq_ras3_config[] = {
+static struct shirq_dev_config shirq_ras3_config[] = {
 	{
-		.virq = VIRQ_EMI,
-		.status_mask = EMI_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_EMI,
+		.status_mask = SPEAR310_EMI_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_ras3 = {
-	.irq = IRQ_GEN_RAS_3,
+static struct spear_shirq shirq_ras3 = {
+	.irq = SPEAR3XX_IRQ_GEN_RAS_3,
 	.dev_config = shirq_ras3_config,
 	.dev_count = ARRAY_SIZE(shirq_ras3_config),
 	.regs = {
 		.enb_reg = -1,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_RAS3_MASK,
+		.status_reg = SPEAR310_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR310_SHIRQ_RAS3_MASK,
 		.clear_reg = -1,
 	},
 };
 
-struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+static struct shirq_dev_config shirq_intrcomm_ras_config[] = {
 	{
-		.virq = VIRQ_TDM_HDLC,
-		.status_mask = TDM_HDLC_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_TDM_HDLC,
+		.status_mask = SPEAR310_TDM_HDLC_IRQ_MASK,
 	}, {
-		.virq = VIRQ_RS485_0,
-		.status_mask = RS485_0_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_RS485_0,
+		.status_mask = SPEAR310_RS485_0_IRQ_MASK,
 	}, {
-		.virq = VIRQ_RS485_1,
-		.status_mask = RS485_1_IRQ_MASK,
+		.virq = SPEAR310_VIRQ_RS485_1,
+		.status_mask = SPEAR310_RS485_1_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_intrcomm_ras = {
-	.irq = IRQ_INTRCOMM_RAS_ARM,
+static struct spear_shirq shirq_intrcomm_ras = {
+	.irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM,
 	.dev_config = shirq_intrcomm_ras_config,
 	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
 	.regs = {
 		.enb_reg = -1,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+		.status_reg = SPEAR310_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR310_SHIRQ_INTRCOMM_RAS_MASK,
 		.clear_reg = -1,
 	},
 };
@@ -258,7 +258,8 @@ struct spear_shirq shirq_intrcomm_ras = {
 /* Add spear310 specific devices here */
 
 /* spear310 routines */
-void __init spear310_init(void)
+void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
+		u8 pmx_dev_count)
 {
 	void __iomem *base;
 	int ret = 0;
@@ -296,6 +297,10 @@ void __init spear310_init(void)
 
 	/* pmx initialization */
 	pmx_driver.base = base;
+	pmx_driver.mode = pmx_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = pmx_dev_count;
+
 	ret = pmx_register(&pmx_driver);
 	if (ret)
 		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",

arch/arm/mach-spear3xx/spear310_evb.c

@@ -19,31 +19,31 @@
 /* padmux devices to enable */
 static struct pmx_dev *pmx_devs[] = {
 	/* spear3xx specific devices */
-	&pmx_i2c,
-	&pmx_ssp,
-	&pmx_gpio_pin0,
-	&pmx_gpio_pin1,
-	&pmx_gpio_pin2,
-	&pmx_gpio_pin3,
-	&pmx_gpio_pin4,
-	&pmx_gpio_pin5,
-	&pmx_uart0,
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_gpio_pin0,
+	&spear3xx_pmx_gpio_pin1,
+	&spear3xx_pmx_gpio_pin2,
+	&spear3xx_pmx_gpio_pin3,
+	&spear3xx_pmx_gpio_pin4,
+	&spear3xx_pmx_gpio_pin5,
+	&spear3xx_pmx_uart0,
 
 	/* spear310 specific devices */
-	&pmx_emi_cs_0_1_4_5,
-	&pmx_emi_cs_2_3,
-	&pmx_uart1,
-	&pmx_uart2,
-	&pmx_uart3_4_5,
-	&pmx_fsmc,
-	&pmx_rs485_0_1,
-	&pmx_tdm0,
+	&spear310_pmx_emi_cs_0_1_4_5,
+	&spear310_pmx_emi_cs_2_3,
+	&spear310_pmx_uart1,
+	&spear310_pmx_uart2,
+	&spear310_pmx_uart3_4_5,
+	&spear310_pmx_fsmc,
+	&spear310_pmx_rs485_0_1,
+	&spear310_pmx_tdm0,
 };
 
 static struct amba_device *amba_devs[] __initdata = {
 	/* spear3xx specific devices */
-	&gpio_device,
-	&uart_device,
+	&spear3xx_gpio_device,
+	&spear3xx_uart_device,
 
 	/* spear310 specific devices */
 };
@@ -58,13 +58,8 @@ static void __init spear310_evb_init(void)
 {
 	unsigned int i;
 
-	/* padmux initialization, must be done before spear310_init */
-	pmx_driver.mode = NULL;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
-
 	/* call spear310 machine init function */
-	spear310_init();
+	spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
 
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));

arch/arm/mach-spear3xx/spear320.c

@@ -29,88 +29,88 @@
 #define SMALL_PRINTERS_MODE	(1 << 3)
 #define ALL_MODES		0xF
 
-struct pmx_mode auto_net_smii_mode = {
+struct pmx_mode spear320_auto_net_smii_mode = {
 	.id = AUTO_NET_SMII_MODE,
 	.name = "Automation Networking SMII Mode",
 	.mask = 0x00,
 };
 
-struct pmx_mode auto_net_mii_mode = {
+struct pmx_mode spear320_auto_net_mii_mode = {
 	.id = AUTO_NET_MII_MODE,
 	.name = "Automation Networking MII Mode",
 	.mask = 0x01,
 };
 
-struct pmx_mode auto_exp_mode = {
+struct pmx_mode spear320_auto_exp_mode = {
 	.id = AUTO_EXP_MODE,
 	.name = "Automation Expanded Mode",
 	.mask = 0x02,
 };
 
-struct pmx_mode small_printers_mode = {
+struct pmx_mode spear320_small_printers_mode = {
 	.id = SMALL_PRINTERS_MODE,
 	.name = "Small Printers Mode",
 	.mask = 0x03,
 };
 
 /* devices */
-struct pmx_dev_mode pmx_clcd_modes[] = {
+static struct pmx_dev_mode pmx_clcd_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE,
 		.mask = 0x0,
 	},
 };
 
-struct pmx_dev pmx_clcd = {
+struct pmx_dev spear320_pmx_clcd = {
 	.name = "clcd",
 	.modes = pmx_clcd_modes,
 	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_emi_modes[] = {
+static struct pmx_dev_mode pmx_emi_modes[] = {
 	{
 		.ids = AUTO_EXP_MODE,
 		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
 	},
 };
 
-struct pmx_dev pmx_emi = {
+struct pmx_dev spear320_pmx_emi = {
 	.name = "emi",
 	.modes = pmx_emi_modes,
 	.mode_count = ARRAY_SIZE(pmx_emi_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_fsmc_modes[] = {
+static struct pmx_dev_mode pmx_fsmc_modes[] = {
 	{
 		.ids = ALL_MODES,
 		.mask = 0x0,
 	},
 };
 
-struct pmx_dev pmx_fsmc = {
+struct pmx_dev spear320_pmx_fsmc = {
 	.name = "fsmc",
 	.modes = pmx_fsmc_modes,
 	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_spp_modes[] = {
+static struct pmx_dev_mode pmx_spp_modes[] = {
 	{
 		.ids = SMALL_PRINTERS_MODE,
 		.mask = 0x0,
 	},
 };
 
-struct pmx_dev pmx_spp = {
+struct pmx_dev spear320_pmx_spp = {
 	.name = "spp",
 	.modes = pmx_spp_modes,
 	.mode_count = ARRAY_SIZE(pmx_spp_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_sdhci_modes[] = {
+static struct pmx_dev_mode pmx_sdhci_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
 			SMALL_PRINTERS_MODE,
@@ -118,42 +118,42 @@ struct pmx_dev_mode pmx_sdhci_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_sdhci = {
+struct pmx_dev spear320_pmx_sdhci = {
 	.name = "sdhci",
 	.modes = pmx_sdhci_modes,
 	.mode_count = ARRAY_SIZE(pmx_sdhci_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_i2s_modes[] = {
+static struct pmx_dev_mode pmx_i2s_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
 		.mask = PMX_UART0_MODEM_MASK,
 	},
 };
 
-struct pmx_dev pmx_i2s = {
+struct pmx_dev spear320_pmx_i2s = {
 	.name = "i2s",
 	.modes = pmx_i2s_modes,
 	.mode_count = ARRAY_SIZE(pmx_i2s_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_uart1_modes[] = {
+static struct pmx_dev_mode pmx_uart1_modes[] = {
 	{
 		.ids = ALL_MODES,
 		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
 	},
 };
 
-struct pmx_dev pmx_uart1 = {
+struct pmx_dev spear320_pmx_uart1 = {
 	.name = "uart1",
 	.modes = pmx_uart1_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_uart1_modem_modes[] = {
+static struct pmx_dev_mode pmx_uart1_modem_modes[] = {
 	{
 		.ids = AUTO_EXP_MODE,
 		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
@@ -165,42 +165,42 @@ struct pmx_dev_mode pmx_uart1_modem_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_uart1_modem = {
+struct pmx_dev spear320_pmx_uart1_modem = {
 	.name = "uart1_modem",
 	.modes = pmx_uart1_modem_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_uart2_modes[] = {
+static struct pmx_dev_mode pmx_uart2_modes[] = {
 	{
 		.ids = ALL_MODES,
 		.mask = PMX_FIRDA_MASK,
 	},
 };
 
-struct pmx_dev pmx_uart2 = {
+struct pmx_dev spear320_pmx_uart2 = {
 	.name = "uart2",
 	.modes = pmx_uart2_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_touchscreen_modes[] = {
+static struct pmx_dev_mode pmx_touchscreen_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE,
 		.mask = PMX_SSP_CS_MASK,
 	},
 };
 
-struct pmx_dev pmx_touchscreen = {
+struct pmx_dev spear320_pmx_touchscreen = {
 	.name = "touchscreen",
 	.modes = pmx_touchscreen_modes,
 	.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_can_modes[] = {
+static struct pmx_dev_mode pmx_can_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
 		.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
@@ -208,28 +208,28 @@ struct pmx_dev_mode pmx_can_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_can = {
+struct pmx_dev spear320_pmx_can = {
 	.name = "can",
 	.modes = pmx_can_modes,
 	.mode_count = ARRAY_SIZE(pmx_can_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_sdhci_led_modes[] = {
+static struct pmx_dev_mode pmx_sdhci_led_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
 		.mask = PMX_SSP_CS_MASK,
 	},
 };
 
-struct pmx_dev pmx_sdhci_led = {
+struct pmx_dev spear320_pmx_sdhci_led = {
 	.name = "sdhci_led",
 	.modes = pmx_sdhci_led_modes,
 	.mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_pwm0_modes[] = {
+static struct pmx_dev_mode pmx_pwm0_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
 		.mask = PMX_UART0_MODEM_MASK,
@@ -239,14 +239,14 @@ struct pmx_dev_mode pmx_pwm0_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_pwm0 = {
+struct pmx_dev spear320_pmx_pwm0 = {
 	.name = "pwm0",
 	.modes = pmx_pwm0_modes,
 	.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_pwm1_modes[] = {
+static struct pmx_dev_mode pmx_pwm1_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
 		.mask = PMX_UART0_MODEM_MASK,
@@ -256,14 +256,14 @@ struct pmx_dev_mode pmx_pwm1_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_pwm1 = {
+struct pmx_dev spear320_pmx_pwm1 = {
 	.name = "pwm1",
 	.modes = pmx_pwm1_modes,
 	.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_pwm2_modes[] = {
+static struct pmx_dev_mode pmx_pwm2_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
 		.mask = PMX_SSP_CS_MASK,
@@ -273,105 +273,105 @@ struct pmx_dev_mode pmx_pwm2_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_pwm2 = {
+struct pmx_dev spear320_pmx_pwm2 = {
 	.name = "pwm2",
 	.modes = pmx_pwm2_modes,
 	.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_pwm3_modes[] = {
+static struct pmx_dev_mode pmx_pwm3_modes[] = {
 	{
 		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_pwm3 = {
+struct pmx_dev spear320_pmx_pwm3 = {
 	.name = "pwm3",
 	.modes = pmx_pwm3_modes,
 	.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_ssp1_modes[] = {
+static struct pmx_dev_mode pmx_ssp1_modes[] = {
 	{
 		.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_ssp1 = {
+struct pmx_dev spear320_pmx_ssp1 = {
 	.name = "ssp1",
 	.modes = pmx_ssp1_modes,
 	.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_ssp2_modes[] = {
+static struct pmx_dev_mode pmx_ssp2_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_ssp2 = {
+struct pmx_dev spear320_pmx_ssp2 = {
 	.name = "ssp2",
 	.modes = pmx_ssp2_modes,
 	.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_mii1_modes[] = {
+static struct pmx_dev_mode pmx_mii1_modes[] = {
 	{
 		.ids = AUTO_NET_MII_MODE,
 		.mask = 0x0,
 	},
 };
 
-struct pmx_dev pmx_mii1 = {
+struct pmx_dev spear320_pmx_mii1 = {
 	.name = "mii1",
 	.modes = pmx_mii1_modes,
 	.mode_count = ARRAY_SIZE(pmx_mii1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_smii0_modes[] = {
+static struct pmx_dev_mode pmx_smii0_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_smii0 = {
+struct pmx_dev spear320_pmx_smii0 = {
 	.name = "smii0",
 	.modes = pmx_smii0_modes,
 	.mode_count = ARRAY_SIZE(pmx_smii0_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_smii1_modes[] = {
+static struct pmx_dev_mode pmx_smii1_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_smii1 = {
+struct pmx_dev spear320_pmx_smii1 = {
 	.name = "smii1",
 	.modes = pmx_smii1_modes,
 	.mode_count = ARRAY_SIZE(pmx_smii1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_i2c1_modes[] = {
+static struct pmx_dev_mode pmx_i2c1_modes[] = {
 	{
 		.ids = AUTO_EXP_MODE,
 		.mask = 0x0,
 	},
 };
 
-struct pmx_dev pmx_i2c1 = {
+struct pmx_dev spear320_pmx_i2c1 = {
 	.name = "i2c1",
 	.modes = pmx_i2c1_modes,
 	.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
@@ -379,131 +379,131 @@ struct pmx_dev pmx_i2c1 = {
 };
 
 /* pmx driver structure */
-struct pmx_driver pmx_driver = {
+static struct pmx_driver pmx_driver = {
 	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
 	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
 };
 
 /* spear3xx shared irq */
-struct shirq_dev_config shirq_ras1_config[] = {
+static struct shirq_dev_config shirq_ras1_config[] = {
 	{
-		.virq = VIRQ_EMI,
-		.status_mask = EMI_IRQ_MASK,
-		.clear_mask = EMI_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_EMI,
+		.status_mask = SPEAR320_EMI_IRQ_MASK,
+		.clear_mask = SPEAR320_EMI_IRQ_MASK,
 	}, {
-		.virq = VIRQ_CLCD,
-		.status_mask = CLCD_IRQ_MASK,
-		.clear_mask = CLCD_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_CLCD,
+		.status_mask = SPEAR320_CLCD_IRQ_MASK,
+		.clear_mask = SPEAR320_CLCD_IRQ_MASK,
 	}, {
-		.virq = VIRQ_SPP,
-		.status_mask = SPP_IRQ_MASK,
-		.clear_mask = SPP_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_SPP,
+		.status_mask = SPEAR320_SPP_IRQ_MASK,
+		.clear_mask = SPEAR320_SPP_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_ras1 = {
-	.irq = IRQ_GEN_RAS_1,
+static struct spear_shirq shirq_ras1 = {
+	.irq = SPEAR3XX_IRQ_GEN_RAS_1,
 	.dev_config = shirq_ras1_config,
 	.dev_count = ARRAY_SIZE(shirq_ras1_config),
 	.regs = {
 		.enb_reg = -1,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_RAS1_MASK,
-		.clear_reg = INT_CLR_MASK_REG,
+		.status_reg = SPEAR320_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR320_SHIRQ_RAS1_MASK,
+		.clear_reg = SPEAR320_INT_CLR_MASK_REG,
 		.reset_to_clear = 1,
 	},
 };
 
-struct shirq_dev_config shirq_ras3_config[] = {
+static struct shirq_dev_config shirq_ras3_config[] = {
 	{
-		.virq = VIRQ_PLGPIO,
-		.enb_mask = GPIO_IRQ_MASK,
-		.status_mask = GPIO_IRQ_MASK,
-		.clear_mask = GPIO_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_PLGPIO,
+		.enb_mask = SPEAR320_GPIO_IRQ_MASK,
+		.status_mask = SPEAR320_GPIO_IRQ_MASK,
+		.clear_mask = SPEAR320_GPIO_IRQ_MASK,
 	}, {
-		.virq = VIRQ_I2S_PLAY,
-		.enb_mask = I2S_PLAY_IRQ_MASK,
-		.status_mask = I2S_PLAY_IRQ_MASK,
-		.clear_mask = I2S_PLAY_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_I2S_PLAY,
+		.enb_mask = SPEAR320_I2S_PLAY_IRQ_MASK,
+		.status_mask = SPEAR320_I2S_PLAY_IRQ_MASK,
+		.clear_mask = SPEAR320_I2S_PLAY_IRQ_MASK,
 	}, {
-		.virq = VIRQ_I2S_REC,
-		.enb_mask = I2S_REC_IRQ_MASK,
-		.status_mask = I2S_REC_IRQ_MASK,
-		.clear_mask = I2S_REC_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_I2S_REC,
+		.enb_mask = SPEAR320_I2S_REC_IRQ_MASK,
+		.status_mask = SPEAR320_I2S_REC_IRQ_MASK,
+		.clear_mask = SPEAR320_I2S_REC_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_ras3 = {
-	.irq = IRQ_GEN_RAS_3,
+static struct spear_shirq shirq_ras3 = {
+	.irq = SPEAR3XX_IRQ_GEN_RAS_3,
 	.dev_config = shirq_ras3_config,
 	.dev_count = ARRAY_SIZE(shirq_ras3_config),
 	.regs = {
-		.enb_reg = INT_ENB_MASK_REG,
+		.enb_reg = SPEAR320_INT_ENB_MASK_REG,
 		.reset_to_enb = 1,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_RAS3_MASK,
-		.clear_reg = INT_CLR_MASK_REG,
+		.status_reg = SPEAR320_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR320_SHIRQ_RAS3_MASK,
+		.clear_reg = SPEAR320_INT_CLR_MASK_REG,
 		.reset_to_clear = 1,
 	},
 };
 
-struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+static struct shirq_dev_config shirq_intrcomm_ras_config[] = {
 	{
-		.virq = VIRQ_CANU,
-		.status_mask = CAN_U_IRQ_MASK,
-		.clear_mask = CAN_U_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_CANU,
+		.status_mask = SPEAR320_CAN_U_IRQ_MASK,
+		.clear_mask = SPEAR320_CAN_U_IRQ_MASK,
 	}, {
-		.virq = VIRQ_CANL,
-		.status_mask = CAN_L_IRQ_MASK,
-		.clear_mask = CAN_L_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_CANL,
+		.status_mask = SPEAR320_CAN_L_IRQ_MASK,
+		.clear_mask = SPEAR320_CAN_L_IRQ_MASK,
 	}, {
-		.virq = VIRQ_UART1,
-		.status_mask = UART1_IRQ_MASK,
-		.clear_mask = UART1_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_UART1,
+		.status_mask = SPEAR320_UART1_IRQ_MASK,
+		.clear_mask = SPEAR320_UART1_IRQ_MASK,
 	}, {
-		.virq = VIRQ_UART2,
-		.status_mask = UART2_IRQ_MASK,
-		.clear_mask = UART2_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_UART2,
+		.status_mask = SPEAR320_UART2_IRQ_MASK,
+		.clear_mask = SPEAR320_UART2_IRQ_MASK,
 	}, {
-		.virq = VIRQ_SSP1,
-		.status_mask = SSP1_IRQ_MASK,
-		.clear_mask = SSP1_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_SSP1,
+		.status_mask = SPEAR320_SSP1_IRQ_MASK,
+		.clear_mask = SPEAR320_SSP1_IRQ_MASK,
 	}, {
-		.virq = VIRQ_SSP2,
-		.status_mask = SSP2_IRQ_MASK,
-		.clear_mask = SSP2_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_SSP2,
+		.status_mask = SPEAR320_SSP2_IRQ_MASK,
+		.clear_mask = SPEAR320_SSP2_IRQ_MASK,
 	}, {
-		.virq = VIRQ_SMII0,
-		.status_mask = SMII0_IRQ_MASK,
-		.clear_mask = SMII0_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_SMII0,
+		.status_mask = SPEAR320_SMII0_IRQ_MASK,
+		.clear_mask = SPEAR320_SMII0_IRQ_MASK,
 	}, {
-		.virq = VIRQ_MII1_SMII1,
-		.status_mask = MII1_SMII1_IRQ_MASK,
-		.clear_mask = MII1_SMII1_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_MII1_SMII1,
+		.status_mask = SPEAR320_MII1_SMII1_IRQ_MASK,
+		.clear_mask = SPEAR320_MII1_SMII1_IRQ_MASK,
 	}, {
-		.virq = VIRQ_WAKEUP_SMII0,
-		.status_mask = WAKEUP_SMII0_IRQ_MASK,
-		.clear_mask = WAKEUP_SMII0_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_WAKEUP_SMII0,
+		.status_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK,
+		.clear_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK,
 	}, {
-		.virq = VIRQ_WAKEUP_MII1_SMII1,
-		.status_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
-		.clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_WAKEUP_MII1_SMII1,
+		.status_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK,
+		.clear_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK,
 	}, {
-		.virq = VIRQ_I2C,
-		.status_mask = I2C1_IRQ_MASK,
-		.clear_mask = I2C1_IRQ_MASK,
+		.virq = SPEAR320_VIRQ_I2C1,
+		.status_mask = SPEAR320_I2C1_IRQ_MASK,
+		.clear_mask = SPEAR320_I2C1_IRQ_MASK,
 	},
 };
 
-struct spear_shirq shirq_intrcomm_ras = {
-	.irq = IRQ_INTRCOMM_RAS_ARM,
+static struct spear_shirq shirq_intrcomm_ras = {
+	.irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM,
 	.dev_config = shirq_intrcomm_ras_config,
 	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
 	.regs = {
 		.enb_reg = -1,
-		.status_reg = INT_STS_MASK_REG,
-		.status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
-		.clear_reg = INT_CLR_MASK_REG,
+		.status_reg = SPEAR320_INT_STS_MASK_REG,
+		.status_reg_mask = SPEAR320_SHIRQ_INTRCOMM_RAS_MASK,
+		.clear_reg = SPEAR320_INT_CLR_MASK_REG,
 		.reset_to_clear = 1,
 	},
 };
@@ -511,7 +511,8 @@ struct spear_shirq shirq_intrcomm_ras = {
 /* Add spear320 specific devices here */
 
 /* spear320 routines */
-void __init spear320_init(void)
+void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
+		u8 pmx_dev_count)
 {
 	void __iomem *base;
 	int ret = 0;
@@ -543,6 +544,10 @@ void __init spear320_init(void)
 
 	/* pmx initialization */
 	pmx_driver.base = base;
+	pmx_driver.mode = pmx_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = pmx_dev_count;
+
 	ret = pmx_register(&pmx_driver);
 	if (ret)
 		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",

arch/arm/mach-spear3xx/spear320_evb.c

@@ -19,28 +19,28 @@
 /* padmux devices to enable */
 static struct pmx_dev *pmx_devs[] = {
 	/* spear3xx specific devices */
-	&pmx_i2c,
-	&pmx_ssp,
-	&pmx_mii,
-	&pmx_uart0,
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_mii,
+	&spear3xx_pmx_uart0,
 
 	/* spear320 specific devices */
-	&pmx_fsmc,
-	&pmx_sdhci,
-	&pmx_i2s,
-	&pmx_uart1,
-	&pmx_uart2,
-	&pmx_can,
-	&pmx_pwm0,
-	&pmx_pwm1,
-	&pmx_pwm2,
-	&pmx_mii1,
+	&spear320_pmx_fsmc,
+	&spear320_pmx_sdhci,
+	&spear320_pmx_i2s,
+	&spear320_pmx_uart1,
+	&spear320_pmx_uart2,
+	&spear320_pmx_can,
+	&spear320_pmx_pwm0,
+	&spear320_pmx_pwm1,
+	&spear320_pmx_pwm2,
+	&spear320_pmx_mii1,
 };
 
 static struct amba_device *amba_devs[] __initdata = {
 	/* spear3xx specific devices */
-	&gpio_device,
-	&uart_device,
+	&spear3xx_gpio_device,
+	&spear3xx_uart_device,
 
 	/* spear320 specific devices */
 };
@@ -55,13 +55,9 @@ static void __init spear320_evb_init(void)
 {
 	unsigned int i;
 
-	/* padmux initialization, must be done before spear320_init */
-	pmx_driver.mode = &auto_net_mii_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
-
 	/* call spear320 machine init function */
-	spear320_init();
+	spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
+			ARRAY_SIZE(pmx_devs));
 
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));

arch/arm/mach-spear3xx/spear3xx.c

@@ -25,10 +25,10 @@
 /* gpio device registration */
 static struct pl061_platform_data gpio_plat_data = {
 	.gpio_base	= 0,
-	.irq_base	= SPEAR_GPIO_INT_BASE,
+	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
 };
 
-struct amba_device gpio_device = {
+struct amba_device spear3xx_gpio_device = {
 	.dev = {
 		.init_name = "gpio",
 		.platform_data = &gpio_plat_data,
@@ -38,11 +38,11 @@ struct amba_device gpio_device = {
 		.end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
-	.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+	.irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
 };
 
 /* uart device registration */
-struct amba_device uart_device = {
+struct amba_device spear3xx_uart_device = {
 	.dev = {
 		.init_name = "uart",
 	},
@@ -51,7 +51,7 @@ struct amba_device uart_device = {
 		.end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
-	.irq = {IRQ_UART, NO_IRQ},
+	.irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
 };
 
 /* Do spear3xx familiy common initialization part here */
@@ -97,215 +97,215 @@ void __init spear3xx_map_io(void)
 	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
 
 	/* This will initialize clock framework */
-	clk_init();
+	spear3xx_clk_init();
 }
 
 /* pad multiplexing support */
 /* devices */
-struct pmx_dev_mode pmx_firda_modes[] = {
+static struct pmx_dev_mode pmx_firda_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_FIRDA_MASK,
 	},
 };
 
-struct pmx_dev pmx_firda = {
+struct pmx_dev spear3xx_pmx_firda = {
 	.name = "firda",
 	.modes = pmx_firda_modes,
 	.mode_count = ARRAY_SIZE(pmx_firda_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_i2c_modes[] = {
+static struct pmx_dev_mode pmx_i2c_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_I2C_MASK,
 	},
 };
 
-struct pmx_dev pmx_i2c = {
+struct pmx_dev spear3xx_pmx_i2c = {
 	.name = "i2c",
 	.modes = pmx_i2c_modes,
 	.mode_count = ARRAY_SIZE(pmx_i2c_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_ssp_cs_modes[] = {
+static struct pmx_dev_mode pmx_ssp_cs_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_SSP_CS_MASK,
 	},
 };
 
-struct pmx_dev pmx_ssp_cs = {
+struct pmx_dev spear3xx_pmx_ssp_cs = {
 	.name = "ssp_chip_selects",
 	.modes = pmx_ssp_cs_modes,
 	.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_ssp_modes[] = {
+static struct pmx_dev_mode pmx_ssp_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_SSP_MASK,
 	},
 };
 
-struct pmx_dev pmx_ssp = {
+struct pmx_dev spear3xx_pmx_ssp = {
 	.name = "ssp",
 	.modes = pmx_ssp_modes,
 	.mode_count = ARRAY_SIZE(pmx_ssp_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_mii_modes[] = {
+static struct pmx_dev_mode pmx_mii_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_mii = {
+struct pmx_dev spear3xx_pmx_mii = {
 	.name = "mii",
 	.modes = pmx_mii_modes,
 	.mode_count = ARRAY_SIZE(pmx_mii_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
+static struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_GPIO_PIN0_MASK,
 	},
 };
 
-struct pmx_dev pmx_gpio_pin0 = {
+struct pmx_dev spear3xx_pmx_gpio_pin0 = {
 	.name = "gpio_pin0",
 	.modes = pmx_gpio_pin0_modes,
 	.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
+static struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_GPIO_PIN1_MASK,
 	},
 };
 
-struct pmx_dev pmx_gpio_pin1 = {
+struct pmx_dev spear3xx_pmx_gpio_pin1 = {
 	.name = "gpio_pin1",
 	.modes = pmx_gpio_pin1_modes,
 	.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
+static struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_GPIO_PIN2_MASK,
 	},
 };
 
-struct pmx_dev pmx_gpio_pin2 = {
+struct pmx_dev spear3xx_pmx_gpio_pin2 = {
 	.name = "gpio_pin2",
 	.modes = pmx_gpio_pin2_modes,
 	.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
+static struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_GPIO_PIN3_MASK,
 	},
 };
 
-struct pmx_dev pmx_gpio_pin3 = {
+struct pmx_dev spear3xx_pmx_gpio_pin3 = {
 	.name = "gpio_pin3",
 	.modes = pmx_gpio_pin3_modes,
 	.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
+static struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_GPIO_PIN4_MASK,
 	},
 };
 
-struct pmx_dev pmx_gpio_pin4 = {
+struct pmx_dev spear3xx_pmx_gpio_pin4 = {
 	.name = "gpio_pin4",
 	.modes = pmx_gpio_pin4_modes,
 	.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
+static struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_GPIO_PIN5_MASK,
 	},
 };
 
-struct pmx_dev pmx_gpio_pin5 = {
+struct pmx_dev spear3xx_pmx_gpio_pin5 = {
 	.name = "gpio_pin5",
 	.modes = pmx_gpio_pin5_modes,
 	.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_uart0_modem_modes[] = {
+static struct pmx_dev_mode pmx_uart0_modem_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_UART0_MODEM_MASK,
 	},
 };
 
-struct pmx_dev pmx_uart0_modem = {
+struct pmx_dev spear3xx_pmx_uart0_modem = {
 	.name = "uart0_modem",
 	.modes = pmx_uart0_modem_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_uart0_modes[] = {
+static struct pmx_dev_mode pmx_uart0_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_UART0_MASK,
 	},
 };
 
-struct pmx_dev pmx_uart0 = {
+struct pmx_dev spear3xx_pmx_uart0 = {
 	.name = "uart0",
 	.modes = pmx_uart0_modes,
 	.mode_count = ARRAY_SIZE(pmx_uart0_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_timer_3_4_modes[] = {
+static struct pmx_dev_mode pmx_timer_3_4_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_TIMER_3_4_MASK,
 	},
 };
 
-struct pmx_dev pmx_timer_3_4 = {
+struct pmx_dev spear3xx_pmx_timer_3_4 = {
 	.name = "timer_3_4",
 	.modes = pmx_timer_3_4_modes,
 	.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
 	.enb_on_reset = 0,
 };
 
-struct pmx_dev_mode pmx_timer_1_2_modes[] = {
+static struct pmx_dev_mode pmx_timer_1_2_modes[] = {
 	{
 		.ids = 0xffffffff,
 		.mask = PMX_TIMER_1_2_MASK,
 	},
 };
 
-struct pmx_dev pmx_timer_1_2 = {
+struct pmx_dev spear3xx_pmx_timer_1_2 = {
 	.name = "timer_1_2",
 	.modes = pmx_timer_1_2_modes,
 	.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
@@ -314,210 +314,210 @@ struct pmx_dev pmx_timer_1_2 = {
 
 #if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
 /* plgpios devices */
-struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_FIRDA_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_0_1 = {
+struct pmx_dev spear3xx_pmx_plgpio_0_1 = {
 	.name = "plgpio 0 and 1",
 	.modes = pmx_plgpio_0_1_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_UART0_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_2_3 = {
+struct pmx_dev spear3xx_pmx_plgpio_2_3 = {
 	.name = "plgpio 2 and 3",
 	.modes = pmx_plgpio_2_3_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_I2C_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_4_5 = {
+struct pmx_dev spear3xx_pmx_plgpio_4_5 = {
 	.name = "plgpio 4 and 5",
 	.modes = pmx_plgpio_4_5_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_SSP_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_6_9 = {
+struct pmx_dev spear3xx_pmx_plgpio_6_9 = {
 	.name = "plgpio 6 to 9",
 	.modes = pmx_plgpio_6_9_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_MII_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_10_27 = {
+struct pmx_dev spear3xx_pmx_plgpio_10_27 = {
 	.name = "plgpio 10 to 27",
 	.modes = pmx_plgpio_10_27_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_28_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_28_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_GPIO_PIN0_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_28 = {
+struct pmx_dev spear3xx_pmx_plgpio_28 = {
 	.name = "plgpio 28",
 	.modes = pmx_plgpio_28_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_29_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_29_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_GPIO_PIN1_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_29 = {
+struct pmx_dev spear3xx_pmx_plgpio_29 = {
 	.name = "plgpio 29",
 	.modes = pmx_plgpio_29_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_30_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_30_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_GPIO_PIN2_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_30 = {
+struct pmx_dev spear3xx_pmx_plgpio_30 = {
 	.name = "plgpio 30",
 	.modes = pmx_plgpio_30_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_31_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_31_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_GPIO_PIN3_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_31 = {
+struct pmx_dev spear3xx_pmx_plgpio_31 = {
 	.name = "plgpio 31",
 	.modes = pmx_plgpio_31_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_32_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_32_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_GPIO_PIN4_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_32 = {
+struct pmx_dev spear3xx_pmx_plgpio_32 = {
 	.name = "plgpio 32",
 	.modes = pmx_plgpio_32_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_33_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_33_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_GPIO_PIN5_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_33 = {
+struct pmx_dev spear3xx_pmx_plgpio_33 = {
 	.name = "plgpio 33",
 	.modes = pmx_plgpio_33_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_SSP_CS_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_34_36 = {
+struct pmx_dev spear3xx_pmx_plgpio_34_36 = {
 	.name = "plgpio 34 to 36",
 	.modes = pmx_plgpio_34_36_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_UART0_MODEM_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_37_42 = {
+struct pmx_dev spear3xx_pmx_plgpio_37_42 = {
 	.name = "plgpio 37 to 42",
 	.modes = pmx_plgpio_37_42_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_TIMER_1_2_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_43_44_47_48 = {
+struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = {
 	.name = "plgpio 43, 44, 47 and 48",
 	.modes = pmx_plgpio_43_44_47_48_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
+static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
 	{
 		.ids = 0x00,
 		.mask = PMX_TIMER_3_4_MASK,
 	},
 };
 
-struct pmx_dev pmx_plgpio_45_46_49_50 = {
+struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
 	.name = "plgpio 45, 46, 49 and 50",
 	.modes = pmx_plgpio_45_46_49_50_modes,
 	.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),

arch/arm/mach-spear6xx/Kconfig

@@ -4,17 +4,18 @@
 
 if ARCH_SPEAR6XX
 
-choice
-	prompt "SPEAr6XX Family"
-	default MACH_SPEAR600
+menu "SPEAr6xx Implementations"
+config BOARD_SPEAR600_EVB
+	bool "SPEAr600 Evaluation Board"
+	select MACH_SPEAR600
+	help
+	  Supports ST SPEAr600 Evaluation Board
+
+endmenu
 
 config MACH_SPEAR600
 	bool "SPEAr600"
 	help
 	  Supports ST SPEAr600 Machine
-endchoice
-
-# Adding SPEAr6XX machine specific configuration files
-source "arch/arm/mach-spear6xx/Kconfig600"
 
 endif #ARCH_SPEAR6XX

arch/arm/mach-spear6xx/Kconfig600

-#
-# SPEAr600 machine configuration file
-#
-
-if MACH_SPEAR600
-
-choice
-	prompt "SPEAr600 Boards"
-	default BOARD_SPEAR600_EVB
-
-config	BOARD_SPEAR600_EVB
-	bool "SPEAr600 Evaluation Board"
-	help
-	  Supports ST SPEAr600 Evaluation Board
-endchoice
-
-endif	#MACH_SPEAR600

arch/arm/mach-spear6xx/clock.c

@@ -671,12 +671,12 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{ .dev_id = "gpio2",		.clk = &gpio2_clk},
 };
 
-void __init clk_init(void)
+void __init spear6xx_clk_init(void)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
 		clk_register(&spear_clk_lookups[i]);
 
-	recalc_root_clocks();
+	clk_init();
 }

arch/arm/mach-spear6xx/include/mach/generic.h

@@ -39,7 +39,7 @@ void __init spear6xx_map_io(void);
 void __init spear6xx_init_irq(void);
 void __init spear6xx_init(void);
 void __init spear600_init(void);
-void __init clk_init(void);
+void __init spear6xx_clk_init(void);
 
 /* Add spear600 machine device structure declarations here */
 

arch/arm/mach-spear6xx/spear6xx.c

@@ -148,7 +148,7 @@ void __init spear6xx_map_io(void)
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
 
 	/* This will initialize clock framework */
-	clk_init();
+	spear6xx_clk_init();
 }
 
 static void __init spear6xx_timer_init(void)

arch/arm/mm/flush.c

@@ -253,8 +253,8 @@ void __sync_icache_dcache(pte_t pteval)
 
 	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
 		__flush_dcache_page(mapping, page);
-	/* pte_exec() already checked above for non-aliasing VIPT cache */
-	if (cache_is_vipt_nonaliasing() || pte_exec(pteval))
+
+	if (pte_exec(pteval))
 		__flush_icache_all();
 }
 #endif
@@ -275,7 +275,8 @@ void __sync_icache_dcache(pte_t pteval)
  *  kernel cache lines for later.  Otherwise, we assume we have
  *  aliasing mappings.
  *
- * Note that we disable the lazy flush for SMP.
+ * Note that we disable the lazy flush for SMP configurations where
+ * the cache maintenance operations are not automatically broadcasted.
  */
 void flush_dcache_page(struct page *page)
 {

arch/arm/plat-spear/clock.c

@@ -903,6 +903,11 @@ void recalc_root_clocks(void)
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 
+void __init clk_init(void)
+{
+	recalc_root_clocks();
+}
+
 #ifdef CONFIG_DEBUG_FS
 /*
  *	debugfs support to trace clock tree hierarchy and attributes

arch/arm/plat-spear/include/plat/clock.h

@@ -224,6 +224,7 @@ struct clcd_rate_tbl {
 };
 
 /* platform specific clock functions */
+void __init clk_init(void);
 void clk_register(struct clk_lookup *cl);
 void recalc_root_clocks(void);
 

arch/arm/tools/mach-types

@@ -17,7 +17,7 @@
 # XXX: the last 12 months.  If your entry is missing please email rmk at
 # XXX: <linux@arm.linux.org.uk>
 #
-# Last update: Sun Mar 20 18:06:11 2011
+# Last update: Sat May 7 08:48:24 2011
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -377,6 +377,8 @@ davinci_da850_evm	MACH_DAVINCI_DA850_EVM	DAVINCI_DA850_EVM	2157
 at91sam9g10ek		MACH_AT91SAM9G10EK	AT91SAM9G10EK		2159
 omap_4430sdp		MACH_OMAP_4430SDP	OMAP_4430SDP		2160
 magx_zn5		MACH_MAGX_ZN5		MAGX_ZN5		2162
+btmavb101		MACH_BTMAVB101		BTMAVB101		2172
+btmawb101		MACH_BTMAWB101		BTMAWB101		2173
 omap3_torpedo		MACH_OMAP3_TORPEDO	OMAP3_TORPEDO		2178
 anw6410			MACH_ANW6410		ANW6410			2183
 imx27_visstrim_m10	MACH_IMX27_VISSTRIM_M10	IMX27_VISSTRIM_M10	2187
@@ -400,6 +402,7 @@ d2net			MACH_D2NET		D2NET			2282
 bigdisk			MACH_BIGDISK		BIGDISK			2283
 at91sam9g20ek_2mmc	MACH_AT91SAM9G20EK_2MMC	AT91SAM9G20EK_2MMC	2288
 bcmring			MACH_BCMRING		BCMRING			2289
+dp6xx			MACH_DP6XX		DP6XX			2302
 mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
 smdk6442		MACH_SMDK6442		SMDK6442		2324
 openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
@@ -424,6 +427,7 @@ smdkv210		MACH_SMDKV210		SMDKV210		2456
 omap_zoom3		MACH_OMAP_ZOOM3		OMAP_ZOOM3		2464
 omap_3630sdp		MACH_OMAP_3630SDP	OMAP_3630SDP		2465
 smartq7			MACH_SMARTQ7		SMARTQ7			2479
+watson_efm_plugin	MACH_WATSON_EFM_PLUGIN	WATSON_EFM_PLUGIN	2491
 g4evm			MACH_G4EVM		G4EVM			2493
 omapl138_hawkboard	MACH_OMAPL138_HAWKBOARD	OMAPL138_HAWKBOARD	2495
 ts41x			MACH_TS41X		TS41X			2502
@@ -433,6 +437,8 @@ mx28evk			MACH_MX28EVK		MX28EVK			2531
 smartq5			MACH_SMARTQ5		SMARTQ5			2534
 davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
 mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
+riot_bei2		MACH_RIOT_BEI2		RIOT_BEI2		2576
+riot_x37		MACH_RIOT_X37		RIOT_X37		2578
 capc7117		MACH_CAPC7117		CAPC7117		2612
 icontrol		MACH_ICONTROL		ICONTROL		2624
 qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
@@ -445,6 +451,7 @@ spear320		MACH_SPEAR320		SPEAR320		2661
 aquila			MACH_AQUILA		AQUILA			2676
 sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
 msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
+ea2478devkit		MACH_EA2478DEVKIT	EA2478DEVKIT		2683
 terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
 msm7x25_surf		MACH_MSM7X25_SURF	MSM7X25_SURF		2703
 msm7x25_ffa		MACH_MSM7X25_FFA	MSM7X25_FFA		2704
@@ -463,75 +470,16 @@ wbd222			MACH_WBD222		WBD222			2753
 msm8x60_surf		MACH_MSM8X60_SURF	MSM8X60_SURF		2755
 msm8x60_sim		MACH_MSM8X60_SIM	MSM8X60_SIM		2756
 tcc8000_sdk		MACH_TCC8000_SDK	TCC8000_SDK		2758
-ap420			MACH_AP420		AP420			2765
-davinci_dm365_fc	MACH_DAVINCI_DM365_FC	DAVINCI_DM365_FC	2767
-msm8x55_surf		MACH_MSM8X55_SURF	MSM8X55_SURF		2768
-msm8x55_ffa		MACH_MSM8X55_FFA	MSM8X55_FFA		2769
-esl_vamana		MACH_ESL_VAMANA		ESL_VAMANA		2770
-sbc35			MACH_SBC35		SBC35			2771
-mpx6446			MACH_MPX6446		MPX6446			2772
-oreo_controller		MACH_OREO_CONTROLLER	OREO_CONTROLLER		2773
-kopin_models		MACH_KOPIN_MODELS	KOPIN_MODELS		2774
-ttc_vision2		MACH_TTC_VISION2	TTC_VISION2		2775
+nanos			MACH_NANOS		NANOS			2759
+stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
 cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
-olympus			MACH_OLYMPUS		OLYMPUS			2778
-vortex			MACH_VORTEX		VORTEX			2779
-s5pc200			MACH_S5PC200		S5PC200			2780
-ecucore_9263		MACH_ECUCORE_9263	ECUCORE_9263		2781
-smdkc200		MACH_SMDKC200		SMDKC200		2782
-emsiso_sx27		MACH_EMSISO_SX27	EMSISO_SX27		2783
-apx_som9g45_ek		MACH_APX_SOM9G45_EK	APX_SOM9G45_EK		2784
-songshan		MACH_SONGSHAN		SONGSHAN		2785
-tianshan		MACH_TIANSHAN		TIANSHAN		2786
-vpx500			MACH_VPX500		VPX500			2787
-am3517sam		MACH_AM3517SAM		AM3517SAM		2788
-skat91_sim508		MACH_SKAT91_SIM508	SKAT91_SIM508		2789
-skat91_s3e		MACH_SKAT91_S3E		SKAT91_S3E		2790
 omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
-df7220			MACH_DF7220		DF7220			2792
-nemini			MACH_NEMINI		NEMINI			2793
-t8200			MACH_T8200		T8200			2794
-apf51			MACH_APF51		APF51			2795
-dr_rc_unit		MACH_DR_RC_UNIT		DR_RC_UNIT		2796
-bordeaux		MACH_BORDEAUX		BORDEAUX		2797
-catania_b		MACH_CATANIA_B		CATANIA_B		2798
-mx51_ocean		MACH_MX51_OCEAN		MX51_OCEAN		2799
 ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
-neocoreomap		MACH_NEOCOREOMAP	NEOCOREOMAP		2801
-withings_wbp		MACH_WITHINGS_WBP	WITHINGS_WBP		2802
-dbps			MACH_DBPS		DBPS			2803
-pcbfp0001		MACH_PCBFP0001		PCBFP0001		2805
-speedy			MACH_SPEEDY		SPEEDY			2806
-chrysaor		MACH_CHRYSAOR		CHRYSAOR		2807
-tango			MACH_TANGO		TANGO			2808
-synology_dsx11		MACH_SYNOLOGY_DSX11	SYNOLOGY_DSX11		2809
-hanlin_v3ext		MACH_HANLIN_V3EXT	HANLIN_V3EXT		2810
-hanlin_v5		MACH_HANLIN_V5		HANLIN_V5		2811
-hanlin_v3plus		MACH_HANLIN_V3PLUS	HANLIN_V3PLUS		2812
-iriver_story		MACH_IRIVER_STORY	IRIVER_STORY		2813
-irex_iliad		MACH_IREX_ILIAD		IREX_ILIAD		2814
-irex_dr1000		MACH_IREX_DR1000	IREX_DR1000		2815
 teton_bga		MACH_TETON_BGA		TETON_BGA		2816
-snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
-tam3517			MACH_TAM3517		TAM3517			2818
-pdc100			MACH_PDC100		PDC100			2819
 eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
 eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
 eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
 eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
-p565			MACH_P565		P565			2824
-acer_a4			MACH_ACER_A4		ACER_A4			2825
-davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
-eshare			MACH_ESHARE		ESHARE			2827
-wlbargn			MACH_WLBARGN		WLBARGN			2829
-bm170			MACH_BM170		BM170			2830
-netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
-netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
-siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
-elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
-mcu1			MACH_MCU1		MCU1			2835
-omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
-omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
 smdkc210		MACH_SMDKC210		SMDKC210		2838
 omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
 spyplug			MACH_SPYPLUG		SPYPLUG			2840
@@ -973,9 +921,7 @@ isc3			MACH_ISC3		ISC3			3291
 rascal			MACH_RASCAL		RASCAL			3292
 hrefv60			MACH_HREFV60		HREFV60			3293
 tpt_2_0			MACH_TPT_2_0		TPT_2_0			3294
-pyramid_td		MACH_PYRAMID_TD		PYRAMID_TD		3295
 splendor		MACH_SPLENDOR		SPLENDOR		3296
-guf_planet		MACH_GUF_PLANET		GUF_PLANET		3297
 msm8x60_qt		MACH_MSM8X60_QT		MSM8X60_QT		3298
 htc_hd_mini		MACH_HTC_HD_MINI	HTC_HD_MINI		3299
 athene			MACH_ATHENE		ATHENE			3300
@@ -1099,3 +1045,71 @@ ecuv5			MACH_ECUV5		ECUV5			3421
 hsgx6d			MACH_HSGX6D		HSGX6D			3422
 dawad7			MACH_DAWAD7		DAWAD7			3423
 sam9repeater		MACH_SAM9REPEATER	SAM9REPEATER		3424
+gt_i5700		MACH_GT_I5700		GT_I5700		3425
+ctera_plug_c2		MACH_CTERA_PLUG_C2	CTERA_PLUG_C2		3426
+marvelct		MACH_MARVELCT		MARVELCT		3427
+ag11005			MACH_AG11005		AG11005			3428
+vangogh			MACH_VANGOGH		VANGOGH			3430
+matrix505		MACH_MATRIX505		MATRIX505		3431
+oce_nigma		MACH_OCE_NIGMA		OCE_NIGMA		3432
+t55			MACH_T55		T55			3433
+bio3k			MACH_BIO3K		BIO3K			3434
+expressct		MACH_EXPRESSCT		EXPRESSCT		3435
+cardhu			MACH_CARDHU		CARDHU			3436
+aruba			MACH_ARUBA		ARUBA			3437
+bonaire			MACH_BONAIRE		BONAIRE			3438
+nuc700evb		MACH_NUC700EVB		NUC700EVB		3439
+nuc710evb		MACH_NUC710EVB		NUC710EVB		3440
+nuc740evb		MACH_NUC740EVB		NUC740EVB		3441
+nuc745evb		MACH_NUC745EVB		NUC745EVB		3442
+transcede		MACH_TRANSCEDE		TRANSCEDE		3443
+mora			MACH_MORA		MORA			3444
+nda_evm			MACH_NDA_EVM		NDA_EVM			3445
+timu			MACH_TIMU		TIMU			3446
+expressh		MACH_EXPRESSH		EXPRESSH		3447
+veridis_a300		MACH_VERIDIS_A300	VERIDIS_A300		3448
+dm368_leopard		MACH_DM368_LEOPARD	DM368_LEOPARD		3449
+omap_mcop		MACH_OMAP_MCOP		OMAP_MCOP		3450
+tritip			MACH_TRITIP		TRITIP			3451
+sm1k			MACH_SM1K		SM1K			3452
+monch			MACH_MONCH		MONCH			3453
+curacao			MACH_CURACAO		CURACAO			3454
+origen			MACH_ORIGEN		ORIGEN			3455
+epc10			MACH_EPC10		EPC10			3456
+sgh_i740		MACH_SGH_I740		SGH_I740		3457
+tuna			MACH_TUNA		TUNA			3458
+mx51_tulip		MACH_MX51_TULIP		MX51_TULIP		3459
+mx51_aster7		MACH_MX51_ASTER7	MX51_ASTER7		3460
+acro37xbrd		MACH_ACRO37XBRD		ACRO37XBRD		3461
+elke			MACH_ELKE		ELKE			3462
+sbc6000x		MACH_SBC6000X		SBC6000X		3463
+r1801e			MACH_R1801E		R1801E			3464
+h1600			MACH_H1600		H1600			3465
+mini210			MACH_MINI210		MINI210			3466
+mini8168		MACH_MINI8168		MINI8168		3467
+pc7308			MACH_PC7308		PC7308			3468
+kmm2m01			MACH_KMM2M01		KMM2M01			3470
+mx51erebus		MACH_MX51EREBUS		MX51EREBUS		3471
+wm8650refboard		MACH_WM8650REFBOARD	WM8650REFBOARD		3472
+tuxrail			MACH_TUXRAIL		TUXRAIL			3473
+arthur			MACH_ARTHUR		ARTHUR			3474
+doorboy			MACH_DOORBOY		DOORBOY			3475
+xarina			MACH_XARINA		XARINA			3476
+roverx7			MACH_ROVERX7		ROVERX7			3477
+sdvr			MACH_SDVR		SDVR			3478
+acer_maya		MACH_ACER_MAYA		ACER_MAYA		3479
+pico			MACH_PICO		PICO			3480
+cwmx233			MACH_CWMX233		CWMX233			3481
+cwam1808		MACH_CWAM1808		CWAM1808		3482
+cwdm365			MACH_CWDM365		CWDM365			3483
+mx51_moray		MACH_MX51_MORAY		MX51_MORAY		3484
+thales_cbc		MACH_THALES_CBC		THALES_CBC		3485
+bluepoint		MACH_BLUEPOINT		BLUEPOINT		3486
+dir665			MACH_DIR665		DIR665			3487
+acmerover1		MACH_ACMEROVER1		ACMEROVER1		3488
+shooter_ct		MACH_SHOOTER_CT		SHOOTER_CT		3489
+bliss			MACH_BLISS		BLISS			3490
+blissc			MACH_BLISSC		BLISSC			3491
+thales_adc		MACH_THALES_ADC		THALES_ADC		3492
+ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
+atdgp318		MACH_ATDGP318		ATDGP318		3494

drivers/mmc/host/mmci.c

@@ -77,7 +77,7 @@ static struct variant_data variant_arm_extended_fifo = {
 static struct variant_data variant_u300 = {
 	.fifosize		= 16 * 4,
 	.fifohalfsize		= 8 * 4,
-	.clkreg_enable		= 1 << 13, /* HWFCEN */
+	.clkreg_enable		= MCI_ST_U300_HWFCEN,
 	.datalength_bits	= 16,
 	.sdio			= true,
 };
@@ -86,7 +86,7 @@ static struct variant_data variant_ux500 = {
 	.fifosize		= 30 * 4,
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
-	.clkreg_enable		= 1 << 14, /* HWFCEN */
+	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
 	.datalength_bits	= 24,
 	.sdio			= true,
 	.st_clkdiv		= true,
@@ -103,6 +103,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 	if (desired) {
 		if (desired >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
+			if (variant->st_clkdiv)
+				clk |= MCI_ST_UX500_NEG_EDGE;
 			host->cclk = host->mclk;
 		} else if (variant->st_clkdiv) {
 			/*

drivers/mmc/host/mmci.h

@@ -11,23 +11,33 @@
 #define MCI_PWR_OFF		0x00
 #define MCI_PWR_UP		0x02
 #define MCI_PWR_ON		0x03
-#define MCI_DATA2DIREN		(1 << 2)
-#define MCI_CMDDIREN		(1 << 3)
-#define MCI_DATA0DIREN		(1 << 4)
-#define MCI_DATA31DIREN		(1 << 5)
 #define MCI_OD			(1 << 6)
 #define MCI_ROD			(1 << 7)
-/* The ST Micro version does not have ROD */
-#define MCI_FBCLKEN		(1 << 7)
-#define MCI_DATA74DIREN		(1 << 8)
+/*
+ * The ST Micro version does not have ROD and reuse the voltage registers
+ * for direction settings
+ */
+#define MCI_ST_DATA2DIREN	(1 << 2)
+#define MCI_ST_CMDDIREN		(1 << 3)
+#define MCI_ST_DATA0DIREN	(1 << 4)
+#define MCI_ST_DATA31DIREN	(1 << 5)
+#define MCI_ST_FBCLKEN		(1 << 7)
+#define MCI_ST_DATA74DIREN	(1 << 8)
 
 #define MMCICLOCK		0x004
 #define MCI_CLK_ENABLE		(1 << 8)
 #define MCI_CLK_PWRSAVE		(1 << 9)
 #define MCI_CLK_BYPASS		(1 << 10)
 #define MCI_4BIT_BUS		(1 << 11)
-/* 8bit wide buses supported in ST Micro versions */
+/*
+ * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
+ * supported in ST Micro U300 and Ux500 versions
+ */
 #define MCI_ST_8BIT_BUS		(1 << 12)
+#define MCI_ST_U300_HWFCEN	(1 << 13)
+#define MCI_ST_UX500_NEG_EDGE	(1 << 13)
+#define MCI_ST_UX500_HWFCEN	(1 << 14)
+#define MCI_ST_UX500_CLK_INV	(1 << 15)
 
 #define MMCIARGUMENT		0x008
 #define MMCICOMMAND		0x00c
@@ -88,8 +98,9 @@
 #define MCI_RXFIFOEMPTY		(1 << 19)
 #define MCI_TXDATAAVLBL		(1 << 20)
 #define MCI_RXDATAAVLBL		(1 << 21)
-#define MCI_SDIOIT		(1 << 22)
-#define MCI_CEATAEND		(1 << 23)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOIT		(1 << 22)
+#define MCI_ST_CEATAEND		(1 << 23)
 
 #define MMCICLEAR		0x038
 #define MCI_CMDCRCFAILCLR	(1 << 0)
@@ -102,8 +113,9 @@
 #define MCI_CMDSENTCLR		(1 << 7)
 #define MCI_DATAENDCLR		(1 << 8)
 #define MCI_DATABLOCKENDCLR	(1 << 10)
-#define MCI_SDIOITC		(1 << 22)
-#define MCI_CEATAENDC		(1 << 23)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITC		(1 << 22)
+#define MCI_ST_CEATAENDC	(1 << 23)
 
 #define MMCIMASK0		0x03c
 #define MCI_CMDCRCFAILMASK	(1 << 0)
@@ -127,8 +139,9 @@
 #define MCI_RXFIFOEMPTYMASK	(1 << 19)
 #define MCI_TXDATAAVLBLMASK	(1 << 20)
 #define MCI_RXDATAAVLBLMASK	(1 << 21)
-#define MCI_SDIOITMASK		(1 << 22)
-#define MCI_CEATAENDMASK	(1 << 23)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITMASK	(1 << 22)
+#define MCI_ST_CEATAENDMASK	(1 << 23)
 
 #define MMCIMASK1		0x040
 #define MMCIFIFOCNT		0x048

include/linux/elf.h

@@ -395,6 +395,7 @@ typedef struct elf64_shdr {
 #define NT_S390_CTRS	0x304		/* s390 control registers */
 #define NT_S390_PREFIX	0x305		/* s390 prefix register */
 #define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
+#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
 
 
 /* Note header in a PT_NOTE section */