MXC: i.MX25 timer support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/plat-mxc/time.c

@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35 */
+/* MX31, MX35, MX25 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(0, timer_base + MX1_2_TSTAT);
 	if (cpu_is_mx2())
 		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3())
+		if (cpu_is_mx3() || cpu_is_mx25())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;