- 19 Aug, 2016 12 commits
-
-
Fabio Estevam authored
The SAI_IPG clocks are enabled by the same bits that control SAI_ROOT_CLK clocks, so represent them as shared clocks. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Fabio Estevam authored
Introduce imx_clk_gate2_shared2() which is similar to the existing imx_clk_gate2_shared() and passes CLK_OPS_PARENT_ENABLE flag, which is useful for i.MX7 shared clocks. Signed-off-by:
-
Fabio Estevam authored
Add IMX7D_SDMA_CORE_CLK clock so that SDMA can be functional. Signed-off-by:
-
Stephen Boyd authored
* clk-meson-gxbb-ao: clk: meson: Add GXBB AO Clock and Reset controller driver dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
-
Neil Armstrong authored
Adds a Clock and Reset controller driver for the Always-On part of the Amlogic Meson GXBB SoC. It exports paired Clocks and Resets lines that will be used by peripherals in the Always-On subsystem. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
Add documentations and dt-bindings headers for the AO clock and reset controller. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Shunli Wang authored
Dt-binding file about reset controller is used to provide kinds of definition, which is referenced by dts file and IC-specified reset controller driver code. Signed-off-by:
Shunli Wang <shunli.wang@mediatek.com> Signed-off-by:
James Liao <jamesjj.liao@mediatek.com> Signed-off-by:
Erin Lo <erin.lo@mediatek.com> Tested-by:
John Crispin <blogic@openwrt.org> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Shunli Wang authored
Add MT2701 clock dt-bindings, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
James Liao authored
This patch adds the binding documentation for apmixedsys, bdpsys, ethsys, hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and vdecsys for Mediatek MT2701. Signed-off-by:
-
James Liao authored
Add a Kconfig to define clock configuration for each SoC, and modify the Makefile to build drivers that only selected in config. Signed-off-by:
-
James Liao authored
Remove __init from functions that will be used by init functions that support probe deferral. Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
-
- 18 Aug, 2016 4 commits
-
-
Tang Yuantian authored
The offset of Core Cluster clock control/status register on cluster group V3 version is different from others, and should be plus 0x70000. Signed-off-by:
Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by:
Scott Wood <oss@buserror.net> Fixes: 9e19ca2f ("clk: qoriq: Add ls2080a support.") Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Stephen Boyd authored
Merge tag 'clk-renesas-for-v4.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Merge r8a7796 watchdog clk support from Geert Uytterhoeven: Add all clocks related to the Watchdog Timer (WDT) controller on the Renesas R-Car M3-W (r8a7796) SoC. * tag 'clk-renesas-for-v4.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a7796: Add watchdog module clock clk: renesas: r8a7796: Add watchdog core clocks
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. We also remove some __init markings in header files as they're useless and we're in the area. Tested-by:
Jisheng Zhang <jszhang@marvell.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
- 17 Aug, 2016 1 commit
-
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 15 Aug, 2016 23 commits
-
-
Stephen Boyd authored
We've started getting out of order, fix it. Signed-off-by: -
Stephen Boyd authored
* clk-qcom-9615: dt-bindings: clock: Update bindings for MDM9615 GCC and LCC clk: mdm9615: Add support for MDM9615 Clock Controllers dt-bindings: Add MDM9615 DT bindings include files for GCC and LCC
-
Neil Armstrong authored
Acked-by:
-
Neil Armstrong authored
In order to support the Qualcomm MDM9615 SoC, add support for the Global and LPASS Clock Controllers. Signed-off-by:
-
Neil Armstrong authored
Signed-off-by:
-
Stephen Boyd authored
* clk-meson-gxbb: clk: gxbb: add MMC gate clocks, and expose for DT
-
Kevin Hilman authored
Add the SD/eMMC gate clocks and expose them for use by DT. While at it, also explose FCLK_DIV2 since this is one of the input clocks to the mux internal to each of the SD/eMMC blocks. Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Laxman Dewangan authored
Maxim Max77620 has one 32KHz clock output and the clock HW IP used on this PMIC is same as what it is there in the MAX77686. Add clock driver support for MAX77620 on the MAX77686 driver. CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Tested-by:
-
Laxman Dewangan authored
Maxim has used the same clock IP on multiple PMICs like MAX77686, MAX77802, MAX77620. Only differences are the number of clocks from these PMICs like MAX77686 has 3 clocks output, MAX776802 have two clock output and MAX77620 has one clock output. Add clock binding details and DT example for the MAX77620. Signed-off-by:
-
Laxman Dewangan authored
The clock IP used on the Maxim PMICs max77686 and max77802 are same. The configuration of clock register is also same except the number of clocks. Define the common DT binding file for the clocks of Maxim PMICs MAX77686 and MAX77802. For this, remove the separate DT binding document file for maxim,max77802 and move all information to maxim,max77686 DT binding document. Signed-off-by:
-
Laxman Dewangan authored
The clock IP used on the Maxim PMICs max77686 and max77802 are same. The configuration of clock register is also same except the number of clocks. Part of common code utilisation, there is 3 files for these chips clock driver, one for common and two files for driver registration. Combine both drivers into single file and move common code into same common file reduces the 2 files and make max77686 and max77802 clock driver in single fine. This driver does not depends on the parent driver structure. The regmap handle is acquired through regmap APIs for the register access. This combination of driver helps on adding clock driver for different Maxim PMICs which has similar clock IP like MAX77620 and MAX20024. Signed-off-by:
-
Stephen Boyd authored
This function is only called by builtin code, but we always exported it and had marked it as __init before commit e4eda8e0 (clk: remove exported function from __init section, 2013-01-06) removed that marking. Given that it isn't used by modules, lets unexport it and add back __init. Cc: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by:
-
Stephen Boyd authored
This function is marked __init, so it can't possibly need to be exported to modules. Remove the marking. Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: -
Stephen Boyd authored
Before commit 0861e5b8 (clk: Add clk_hw OF clk providers, 2016-02-05) __of_clk_get_from_provider() would return an error pointer of the provider's choosing if there was a provider registered and EPROBE_DEFER otherwise. After that commit, it would return EPROBE_DEFER regardless of whether or not the provider returned an error. This is odd and can lead to behavior where clk consumers keep probe deferring when they should be seeing some other error. Let's restore the previous behavior where we only return EPROBE_DEFER when there isn't a provider in our of_clk_providers list. Otherwise, return the error from the last provider we find that matches the node. Reported-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Fixes: 0861e5b8 ("clk: Add clk_hw OF clk providers") Signed-off-by:
-
Wei Yongjun authored
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
Gregory CLEMENT authored
These clocks are the ones which will be used as source for the peripherals of the Armada 3700 SoC. On this SoC there is two blocks of clocks: the North bridge one and the South bridge one. Most of them are gatable. Most of the time their rate are their parent rated divided by a ratio depending of two registers. Their parent can be choose between the TBG clocks for most of them. However, some of them can't choose their parent or directly depend of the xtal clocks. Other ones do not use exactly the same pattern to find the ratio between their parent rate and their rate. For these reason each clock is a composite clock and the operations they use are different depending of the clock. According to the datasheet it would be possible to select the parent clock and the ratio, however currently the driver does not support it. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Gregory CLEMENT authored
This commit adds the DT binding documentation for the peripheral clocks used in the Marvell Armada 3700 SoCs. Signed-off-by:
-
Gregory CLEMENT authored
These clocks are children of the xtal clock and each one can be selected as a source for the peripheral clocks. According to the datasheet it should be possible to modify their rate, but currently it is not supported. Signed-off-by:
-
Gregory CLEMENT authored
This commit adds the DT binding documentation for the Time Base Generator clock used in the Marvell Armada 3700 SoCs. Signed-off-by:
-
Gregory CLEMENT authored
This clock is the parent of all the Armada 3700 clocks. It is a fixed rate clock which depends on the gpio configuration read when resetting the SoC. Signed-off-by:
-
Gregory CLEMENT authored
This commit adds the DT binding documentation for the the Xtal clock on Armada 3700 used in the Marvell Armada 3700 SoCs. Signed-off-by:
-
Peter Ujfalusi authored
The driver is to provide the functional clock to OMAP4/5 McPDM. The clock is named as pdmclk in the documentations so change the function names, structure names and variables to align with this. At the same time rename the driver from "twl6040-clk" to "twl6040-pdmclk". This can be done w/o regression since the clock driver is not in use at the moment, the MFD core driver is not even registering the device for it. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
In order ot be able to use the pdmclk clock via DT it need to be registered as of_clk_provide. Since the twl6040 clock driver does not have it's own DT node, use the parent's node for registering. Signed-off-by:
-
