Merge series "ASoC: mediatek: mt8183: support machine driver for max98357b" from Tzung-Bi Shih <tzungbi@google.com>:

The series re-uses mt8183-mt6358-ts3a227-max98357.c to support machine driver
with max98357b.

The 1st patch enables left justified format from mt8183 audio platform.

The 2nd patch adds document for the new proposed compatible string for
max98357b.

The 3rd patch supports machine driver with max98357b and uses left justified
format for it.

Tzung-Bi Shih (3):
  ASoC: mediatek: mt8183: support left justified format for I2S
  ASoC: dt-bindings: mt8183: add compatible string for using max98357b
  ASoC: mediatek: mt8183: support machine driver with max98357b

 .../sound/mt8183-mt6358-ts3a227-max98357.txt  |  1 +
 sound/soc/mediatek/mt8183/mt8183-dai-i2s.c    | 59 ++++++++++++++++---
 .../mt8183/mt8183-mt6358-ts3a227-max98357.c   | 22 ++++++-
 3 files changed, 73 insertions(+), 9 deletions(-)

--
2.28.0.rc0.105.gf9edc3c819-goog

Daniel Baluta <daniel.baluta@nxp.com>:

From: Daniel Baluta <daniel.baluta@nxp.com>

This patchseries contains a couple of SOF IMX fixes
found during our first IMX SOF release.

Daniel Baluta (7):
  ASoC: SOF: define INFO_ flags in dsp_ops for imx8
  ASoC: SOF: imx: Use ARRAY_SIZE instead of hardcoded value
  ASoC: SOF: imx8: Fix ESAI DAI driver name for i.MX8/iMX8X
  ASoC: SOF: imx8m: Fix SAI DAI driver for i.MX8M
  ASoC: SOF: imx8: Add SAI dai driver for i.MX/i.MX8X
  ASoC: SOF: topology: Update SAI config bclk/fsync rate
  ASoC: SOF: pcm: Update rate/channels for SAI/ESAI DAIs

 sound/soc/sof/imx/imx8.c  | 24 +++++++++++++++++++++---
 sound/soc/sof/imx/imx8m.c |  4 ++--
 sound/soc/sof/pcm.c       |  8 ++++++++
 sound/soc/sof/topology.c  |  2 ++
 4 files changed, 33 insertions(+), 5 deletions(-)

--
2.17.1

Commit 5bd70440 ("ASoC: soc-dai: revert all changes to DAI
startup/shutdown sequence"), introduced a slight change of semantics
to DAI startup/shutdown. If startup() returns an error, shutdown()
is now called for the DAI.

This causes a deadlock in hdac_hda which issues a call to
snd_hda_codec_pcm_put() in case open fails. Upon error, soc_pcm_open()
will call shutdown(), and pcm_put() ends up getting called twice. Result
is a deadlock on pcm->open_mutex, as snd_device_free() gets called from
within snd_pcm_open(). Typical task backtrace looks like this:

[  334.244627]  snd_pcm_dev_disconnect+0x49/0x340 [snd_pcm]
[  334.244634]  __snd_device_disconnect.part.0+0x2c/0x50 [snd]
[  334.244640]  __snd_device_free+0x7f/0xc0 [snd]
[  334.244650]  snd_hda_codec_pcm_put+0x87/0x120 [snd_hda_codec]
[  334.244660]  soc_pcm_open+0x6a0/0xbe0 [snd_soc_core]
[  334.244676]  ? dpcm_add_paths.isra.0+0x491/0x590 [snd_soc_core]
[  334.244679]  ? kfree+0x9a/0x230
[  334.244686]  dpcm_be_dai_startup+0x255/0x300 [snd_soc_core]
[  334.244695]  dpcm_fe_dai_open+0x20e/0xf30 [snd_soc_core]
[  334.244701]  ? snd_pcm_hw_rule_muldivk+0x110/0x110 [snd_pcm]
[  334.244709]  ? dpcm_be_dai_startup+0x300/0x300 [snd_soc_core]
[  334.244714]  ? snd_pcm_attach_substream+0x3c4/0x540 [snd_pcm]
[  334.244719]  snd_pcm_open_substream+0x69a/0xb60 [snd_pcm]
[  334.244729]  ? snd_pcm_release_substream+0x30/0x30 [snd_pcm]
[  334.244732]  ? __mutex_lock_slowpath+0x10/0x10
[  334.244736]  snd_pcm_open+0x1b3/0x3c0 [snd_pcm]

Fixes: 5bd70440 ("ASoC: soc-dai: revert all changes to DAI startup/shutdown sequence")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2159
Link: https://lore.kernel.org/r/20200717101950.3885187-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The hdac_hda remove implementation fails to free the hda codec
resources, leading to memleaks at module unload. This gap has been there
from the start, commit 6bae5ea9 ("ASoC: hdac_hda: add asoc
extension for legacy HDA codec drivers").

Instead of duplicating the cleanup logic, use the common
snd_hda_codec_cleanup_for_unbind() to free the resources. Remove
existing code in hdac_hda to cleanup "codec.jackpoll_work" and call to
snd_hdac_regmap_exit(), as these are already done in
snd_hda_codec_cleanup_for_unbind().

The cleanup is done in ASoC component remove() callback and not in the
HDAC bus hdev_detach(). This is done to ensure the codec specific
cleanup routines are run before the parent card is freed.

Fixes: 6bae5ea9 ("ASoC: hdac_hda: add asoc extension for legacy HDA codec drivers")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2195
Link: https://lore.kernel.org/r/20200717101950.3885187-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add error handling for patch_ops in hdac_hda_codec_probe().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200717101950.3885187-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200719153822.59788-1-grandmaster@al2klimov.deSigned-off-by: Mark Brown <broonie@kernel.org>

Supports machine driver with max98357b
("mt8183-mt6358-ts3a227-max98357b").

The key difference from max98357a: max98357b needs to use left
justified format.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200720012559.906088-4-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Machines with max98357b should use the compatible string
"mt8183-mt6358-ts3a227-max98357b".
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200720012559.906088-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

MT8183 audio platform supports EIAJ and I2S formats.  The code fixed to
use I2S format in the past.

Supports EIAJ mode via set_fmt ops and preserves to use I2S format as
the default format intentionally.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200720012559.906088-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fixup BE DAI links rate/channels parameters to match any values
from topology.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-8-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

These parameters are read from topology file and sent to DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-7-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

With SOF we support 1 ESAI interface and 1 SAI interface.
This patch adds SAI1 interface support existing on i.MX8/i.MX8X
boards.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-6-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

This must match DAI name from topology. Also, sai-port
is too generic. Physical DAI port on i.MX8MP is labeled SAI3.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-5-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

This must match DAI name from topology. Also, esai-port is too generic
as they are 2 ESAIs on i.MX8/i.MX8X boards.

SOF integration only uses ESAI0 for now.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-4-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

With this change we no longer need to update num_drv when adding
new DAI driver.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-3-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

In the past, the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP were
defined in the SOF PCM core, but that was changed since
commit 27e322fa ("ASoC: SOF: define INFO_ flags in dsp_ops")

Now these flags must be set in DSP ops.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200720072046.8152-2-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "Add ASoC AHUB components for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>:

Overview
========
Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
pre-processing and post-processing. It also includes a programmable full
crossbar for routing audio data across these accelerators.

This series exposes some of these below mentioned HW devices as ASoC
components for Tegra platforms from Tegra210 onwards.
 * ADMAIF : The interface between ADMA and AHUB
 * XBAR   : Crossbar for routing audio samples across various modules
 * I2S    : Inter-IC Sound Controller
 * DMIC   : Digital Microphone
 * DSPK   : Digital Speaker

Following is the summary of current series.
 * Add YAML DT binding documentation for above mentioned modules.
 * Helper function for ACIF programming is exposed for Tegra210 and later.
 * Add ASoC driver components for each of the above modules.
 * Build ACONNECT and ADMA drivers which are essential to realize audio
   use case.
 * Add DT entries for above components for Tegra210, Tegra186 and
   Tegra194.

As per the suggestion in [0] audio graph based sound card support
is pushed in a separate series.

[0] https://lkml.org/lkml/2020/6/27/4

Changelog
=========

v4 -> v5
--------
 * Common changes
   - simple-card driver changes are dropped. Changes are migrated to audio
     graph card and are moved to a separate series as suggested.

   - '#sound-dai-cells' property is not needed for planned audio graph card
     Hence dropped from documentation and related DT binding of component
     drivers.

   - CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to
     represent DAI links using audio graph card. Similary DAIs are added in
     AHUB driver to describe endpoints in audio crossbar. Routing is updated
     to reflect the same in drivers.

v3 -> v4
--------
 * [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210"
   - Removed multiple examples and retained one example per doc
   - Fixed as per inputs on the previous series
   - Tested bindings with 'make dt_binding_check/dtbs_check'

 * [2/23] "ASoC: tegra: Add support for CIF programming"
   - No change

 * Common changes (for patch [3/10] to [7/10])
   - Mixer control overrides, for PCM parameters (rate, channel, bits),
     in each driver are dropped.
   - Updated routing as per DPCM usage
   - Minor changes related to formatting

 * New changes (patch [8/23] to [18/23] and patch [23/23])
   - Based on discussions in following threads DPCM is used for Tegra Audio.
     https://lkml.org/lkml/2020/2/20/91
     https://lkml.org/lkml/2020/4/30/519
   - The simple-card driver is used for Tegra Audio and accordingly
     some enhancements are made in simple-card and core drivers.
   - Patch [8/23] to [18/23] are related to simple-card and core changes.
   - Patch [23/23] adds sound card support to realize complete audio path.
     This is based on simple-card driver with proposed enhancements.
   - Re-ordered patches depending on above

v2 -> v3
--------
 * [1/10]  "dt-bindings: sound: tegra: add DT binding for AHUB
   - Updated licence
   - Removed redundancy w.r.t items/const/enum
   - Added constraints wherever needed with "pattern" property

 * [2/10]  "ASoC: tegra: add support for CIF programming"
   - Removed tegra_cif.c
   - Instead added inline helper function in tegra_cif.h

 * common changes (for patch [3/10] to [7/10])
   - Replace LATE system calls with Normal sleep
   - Remove explicit RPM suspend in driver remove() call
   - Use devm_kzalloc() instead of devm_kcalloc() for single element
   - Replace 'ret' with 'err' for better reading
   - Consistent error printing style across drivers
   - Minor formating fixes

 * [8/10]  "arm64: tegra: add AHUB components for few Tegra chips"
   - no change

 * [9/10]  "arm64: tegra: enable AHUB modules for few Tegra chips"
   - no change

 * [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later"
   (New patch)
   - Enables ACONNECT and AHUB components. With this AHUB and components are
     registered with ASoC core.

v1 -> v2
--------
 * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB"
   - no changes

 * [2/9] "ASoC: tegra: add support for CIF programming"
   - removed CIF programming changes for legacy chips.
   - this patch now exposes helper function for CIF programming,
     which can be used on Tegra210 later.
   - later tegra_cif.c can be extended for legacy chips as well.
   - updated commit message accordingly

 * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver"
   - removed unnecessary initialization of 'ret' in probe()

 * [4/9] "ASoC: tegra: add Tegra210 based I2S driver"
   - removed unnecessary initialization of 'ret' in probe()
   - fixed indentation
   - added consistent bracing for if-else clauses
   - updated 'rx_fifo_th' type to 'unsigned int'
   - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h

 * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver"
   - used of_device_get_match_data() to get 'soc_data' and removed
    explicit of_match_device()
   - used devm_platform_ioremap_resource() and removed explicit
    platform_get_resource()
   - fixed indentation for devm_snd_soc_register_component()
   - updated commit message
   - updated commit message to reflect compatible binding for Tegra186 and
     Tegra194.

 * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver"
   - removed unnecessary initialization of 'ret' in probe()
   - updated 'max_th' to 'unsigned int'
   - shortened lengthy macro names to avoid wrapping in
     tegra186_dspk_wr_reg() and to be consistent

 * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver"
   - used of_device_get_match_data() and removed explicit of_match_device()
   - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h
   - updated commit message to reflect compatible binding for Tegra186 and
     Tegra194.

 * [8/9] "arm64: tegra: add AHUB components for few Tegra chips"
   - no change

 * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips"
   - no change

 * common changes for patch [3/9] to [7/9]
   - sorted headers in alphabetical order
   - moved MODULE_DEVICE_TABLE() right below *_of_match table
   - removed macro DRV_NAME
   - removed explicit 'owner' field from platform_driver structure
   - added 'const' to snd_soc_dai_ops structure

Sameer Pujar (11):
  ASoC: dt-bindings: tegra: Add DT bindings for Tegra210
  ASoC: tegra: Add support for CIF programming
  ASoC: tegra: Add Tegra210 based DMIC driver
  ASoC: tegra: Add Tegra210 based I2S driver
  ASoC: tegra: Add Tegra210 based AHUB driver
  ASoC: tegra: Add Tegra186 based DSPK driver
  ASoC: tegra: Add Tegra210 based ADMAIF driver
  arm64: defconfig: Build AHUB component drivers
  arm64: defconfig: Build ADMA and ACONNECT driver
  arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
  arm64: tegra: Add DT binding for AHUB components

 .../bindings/sound/nvidia,tegra186-dspk.yaml       |  83 +++
 .../bindings/sound/nvidia,tegra210-admaif.yaml     | 111 +++
 .../bindings/sound/nvidia,tegra210-ahub.yaml       | 136 ++++
 .../bindings/sound/nvidia,tegra210-dmic.yaml       |  83 +++
 .../bindings/sound/nvidia,tegra210-i2s.yaml        | 101 +++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 217 +++++-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           | 225 +++++-
 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts |  12 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           | 140 ++++
 arch/arm64/configs/defconfig                       |   8 +
 sound/soc/tegra/Kconfig                            |  56 ++
 sound/soc/tegra/Makefile                           |  10 +
 sound/soc/tegra/tegra186_dspk.c                    | 442 +++++++++++
 sound/soc/tegra/tegra186_dspk.h                    |  70 ++
 sound/soc/tegra/tegra210_admaif.c                  | 800 ++++++++++++++++++++
 sound/soc/tegra/tegra210_admaif.h                  | 162 ++++
 sound/soc/tegra/tegra210_ahub.c                    | 676 +++++++++++++++++
 sound/soc/tegra/tegra210_ahub.h                    | 127 ++++
 sound/soc/tegra/tegra210_dmic.c                    | 455 ++++++++++++
 sound/soc/tegra/tegra210_dmic.h                    |  82 +++
 sound/soc/tegra/tegra210_i2s.c                     | 812 +++++++++++++++++++++
 sound/soc/tegra/tegra210_i2s.h                     | 126 ++++
 sound/soc/tegra/tegra_cif.h                        |  65 ++
 sound/soc/tegra/tegra_pcm.c                        | 235 +++++-
 sound/soc/tegra/tegra_pcm.h                        |  21 +-
 25 files changed, 5251 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
 create mode 100644 sound/soc/tegra/tegra186_dspk.c
 create mode 100644 sound/soc/tegra/tegra186_dspk.h
 create mode 100644 sound/soc/tegra/tegra210_admaif.c
 create mode 100644 sound/soc/tegra/tegra210_admaif.h
 create mode 100644 sound/soc/tegra/tegra210_ahub.c
 create mode 100644 sound/soc/tegra/tegra210_ahub.h
 create mode 100644 sound/soc/tegra/tegra210_dmic.c
 create mode 100644 sound/soc/tegra/tegra210_dmic.h
 create mode 100644 sound/soc/tegra/tegra210_i2s.c
 create mode 100644 sound/soc/tegra/tegra210_i2s.h
 create mode 100644 sound/soc/tegra/tegra_cif.h

--
2.7.4

ADMAIF is the interface between ADMA and AHUB. Each ADMA channel that
sends/receives data to/from AHUB must intreface through an ADMAIF channel.
ADMA channel sending data to AHUB pairs with an ADMAIF Tx channel and
similarly ADMA channel receiving data from AHUB pairs with an ADMAIF Rx
channel. Buffer size is configurable for each ADMAIF channel, but currently
SW uses default values.

This patch registers ADMAIF driver with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes ADMAIF interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The ADMAIF device can be enabled in the DT via
"nvidia,tegra210-admaif" compatible binding.

Tegra PCM driver is updated to expose required PCM interfaces and
snd_pcm_ops callbacks.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-8-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the tas2770 binding to yaml format.
Add in the reset-gpio to the binding as it is in the code but not
documented in the binding.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200720181202.31000-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the reset property name when allocating the GPIO descriptor.
The gpiod_get_optional appends either the -gpio or -gpios suffix to the
name.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200720181202.31000-2-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the Freescale SGTL5000 device tree bindings from free-form text
format to json-schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200608174658.1315325-1-thierry.reding@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Small patchset to harden the SoundWire machine driver, change bad
HIDs, update PLL settings and avoid memory leaks. Given that the
SoundWire core parts are not upstream it's probably not necessary to
provide the patches to stable branches.

Bard Liao (1):
  ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name

Kai Vehmanen (2):
  ASoC: Intel: sof_sdw: add support for systems without i915 audio
  ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded

Libin Yang (1):
  ASoC: Intel: common: change match table ehl-rt5660

Pierre-Louis Bossart (1):
  ASoC: Intel: sof_sdw_rt711: remove properties in card remove

Yong Zhi (1):
  ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq

 sound/soc/intel/boards/sof_rt5682.c           |  9 +++++-
 sound/soc/intel/boards/sof_sdw.c              | 31 +++++++++++++------
 sound/soc/intel/boards/sof_sdw_common.h       |  2 ++
 sound/soc/intel/boards/sof_sdw_hdmi.c         |  6 ++++
 sound/soc/intel/boards/sof_sdw_rt711.c        | 17 +++++++++-
 .../intel/common/soc-acpi-intel-ehl-match.c   |  2 +-
 6 files changed, 54 insertions(+), 13 deletions(-)

base-commit: 22e9b543
--
2.25.1

In commit d696a614 ("ASoC: rt1015: Add condition to prevent SoC
providing bclk in ratio of 50 times of sample rate."), PLL input at 50fs
is no longer supported, the new recommended settings at 48Khz rate are:

PLL input       SSP bclk
------------------------
64fs            3.073Mhz
100fs           4.8Mhz

(bclk update is reflected in topoplogy.)
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The mc_private->hdmi_pcm_list is populated by elements loaded during
DSP topology load. Valid topologies for this machine driver will always
have PCM nodes for HDMI, but driver should fail gracefully even in the case
this is not true. Add a sanity check to sof_sdw_hdmi_card_late_probe()
for this case. Without the fix, a null pcm handle gets dereferenced.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Extend the generic SOF Soundwire machine driver to support systems where
iDisp HDMI/DP audio codec is disabled for some reason (i915 driver
disabled, HDMI/DP implemented with a discrete GPU, etc). Switch codecs
to SoC dummy in the affected DAI links. This allows to reuse existing
topologies for this case.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The rt711 jack detection properties are set from the machine drivers
during the card probe, as done in other ASoC examples.

KASAN reports a use-after-free error when unbinding drivers due to a
confusing sequence between the ACPI core, the device core and the
SoundWire device cleanups.

Rather than fixing this sequence, follow the recommendation to have
the same caller add and remove properties, add an explicit
device_remove_properties() in the card .remove() callback.

In future patches the use of device_add/remove_properties will be
replaced by a direct handling of a swnode, but the sequence will
remain the same.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We can get codec name from dai link.
Suggested-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "Add ASoC AHUB components for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>:

Overview
========
Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio
Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio
pre-processing and post-processing. It also includes a programmable full
crossbar for routing audio data across these accelerators.

This series exposes some of these below mentioned HW devices as ASoC
components for Tegra platforms from Tegra210 onwards.
 * ADMAIF : The interface between ADMA and AHUB
 * XBAR   : Crossbar for routing audio samples across various modules
 * I2S    : Inter-IC Sound Controller
 * DMIC   : Digital Microphone
 * DSPK   : Digital Speaker

Following is the summary of current series.
 * Add YAML DT binding documentation for above mentioned modules.
 * Helper function for ACIF programming is exposed for Tegra210 and later.
 * Add ASoC driver components for each of the above modules.
 * Build ACONNECT and ADMA drivers which are essential to realize audio
   use case.
 * Add DT entries for above components for Tegra210, Tegra186 and
   Tegra194.

As per the suggestion in [0] audio graph based sound card support
is pushed in a separate series.

[0] https://lkml.org/lkml/2020/6/27/4

Changelog
=========

v4 -> v5
--------
 * Common changes
   - simple-card driver changes are dropped. Changes are migrated to audio
     graph card and are moved to a separate series as suggested.

   - '#sound-dai-cells' property is not needed for planned audio graph card
     Hence dropped from documentation and related DT binding of component
     drivers.

   - CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to
     represent DAI links using audio graph card. Similary DAIs are added in
     AHUB driver to describe endpoints in audio crossbar. Routing is updated
     to reflect the same in drivers.

v3 -> v4
--------
 * [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210"
   - Removed multiple examples and retained one example per doc
   - Fixed as per inputs on the previous series
   - Tested bindings with 'make dt_binding_check/dtbs_check'

 * [2/23] "ASoC: tegra: Add support for CIF programming"
   - No change

 * Common changes (for patch [3/10] to [7/10])
   - Mixer control overrides, for PCM parameters (rate, channel, bits),
     in each driver are dropped.
   - Updated routing as per DPCM usage
   - Minor changes related to formatting

 * New changes (patch [8/23] to [18/23] and patch [23/23])
   - Based on discussions in following threads DPCM is used for Tegra Audio.
     https://lkml.org/lkml/2020/2/20/91
     https://lkml.org/lkml/2020/4/30/519
   - The simple-card driver is used for Tegra Audio and accordingly
     some enhancements are made in simple-card and core drivers.
   - Patch [8/23] to [18/23] are related to simple-card and core changes.
   - Patch [23/23] adds sound card support to realize complete audio path.
     This is based on simple-card driver with proposed enhancements.
   - Re-ordered patches depending on above

v2 -> v3
--------
 * [1/10]  "dt-bindings: sound: tegra: add DT binding for AHUB
   - Updated licence
   - Removed redundancy w.r.t items/const/enum
   - Added constraints wherever needed with "pattern" property

 * [2/10]  "ASoC: tegra: add support for CIF programming"
   - Removed tegra_cif.c
   - Instead added inline helper function in tegra_cif.h

 * common changes (for patch [3/10] to [7/10])
   - Replace LATE system calls with Normal sleep
   - Remove explicit RPM suspend in driver remove() call
   - Use devm_kzalloc() instead of devm_kcalloc() for single element
   - Replace 'ret' with 'err' for better reading
   - Consistent error printing style across drivers
   - Minor formating fixes

 * [8/10]  "arm64: tegra: add AHUB components for few Tegra chips"
   - no change

 * [9/10]  "arm64: tegra: enable AHUB modules for few Tegra chips"
   - no change

 * [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later"
   (New patch)
   - Enables ACONNECT and AHUB components. With this AHUB and components are
     registered with ASoC core.

v1 -> v2
--------
 * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB"
   - no changes

 * [2/9] "ASoC: tegra: add support for CIF programming"
   - removed CIF programming changes for legacy chips.
   - this patch now exposes helper function for CIF programming,
     which can be used on Tegra210 later.
   - later tegra_cif.c can be extended for legacy chips as well.
   - updated commit message accordingly

 * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver"
   - removed unnecessary initialization of 'ret' in probe()

 * [4/9] "ASoC: tegra: add Tegra210 based I2S driver"
   - removed unnecessary initialization of 'ret' in probe()
   - fixed indentation
   - added consistent bracing for if-else clauses
   - updated 'rx_fifo_th' type to 'unsigned int'
   - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h

 * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver"
   - used of_device_get_match_data() to get 'soc_data' and removed
    explicit of_match_device()
   - used devm_platform_ioremap_resource() and removed explicit
    platform_get_resource()
   - fixed indentation for devm_snd_soc_register_component()
   - updated commit message
   - updated commit message to reflect compatible binding for Tegra186 and
     Tegra194.

 * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver"
   - removed unnecessary initialization of 'ret' in probe()
   - updated 'max_th' to 'unsigned int'
   - shortened lengthy macro names to avoid wrapping in
     tegra186_dspk_wr_reg() and to be consistent

 * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver"
   - used of_device_get_match_data() and removed explicit of_match_device()
   - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h
   - updated commit message to reflect compatible binding for Tegra186 and
     Tegra194.

 * [8/9] "arm64: tegra: add AHUB components for few Tegra chips"
   - no change

 * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips"
   - no change

 * common changes for patch [3/9] to [7/9]
   - sorted headers in alphabetical order
   - moved MODULE_DEVICE_TABLE() right below *_of_match table
   - removed macro DRV_NAME
   - removed explicit 'owner' field from platform_driver structure
   - added 'const' to snd_soc_dai_ops structure

Sameer Pujar (11):
  ASoC: dt-bindings: tegra: Add DT bindings for Tegra210
  ASoC: tegra: Add support for CIF programming
  ASoC: tegra: Add Tegra210 based DMIC driver
  ASoC: tegra: Add Tegra210 based I2S driver
  ASoC: tegra: Add Tegra210 based AHUB driver
  ASoC: tegra: Add Tegra186 based DSPK driver
  ASoC: tegra: Add Tegra210 based ADMAIF driver
  arm64: defconfig: Build AHUB component drivers
  arm64: defconfig: Build ADMA and ACONNECT driver
  arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
  arm64: tegra: Add DT binding for AHUB components

 .../bindings/sound/nvidia,tegra186-dspk.yaml       |  83 +++
 .../bindings/sound/nvidia,tegra210-admaif.yaml     | 111 +++
 .../bindings/sound/nvidia,tegra210-ahub.yaml       | 136 ++++
 .../bindings/sound/nvidia,tegra210-dmic.yaml       |  83 +++
 .../bindings/sound/nvidia,tegra210-i2s.yaml        | 101 +++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 217 +++++-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           | 225 +++++-
 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts |  12 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           | 140 ++++
 arch/arm64/configs/defconfig                       |   8 +
 sound/soc/tegra/Kconfig                            |  56 ++
 sound/soc/tegra/Makefile                           |  10 +
 sound/soc/tegra/tegra186_dspk.c                    | 442 +++++++++++
 sound/soc/tegra/tegra186_dspk.h                    |  70 ++
 sound/soc/tegra/tegra210_admaif.c                  | 800 ++++++++++++++++++++
 sound/soc/tegra/tegra210_admaif.h                  | 162 ++++
 sound/soc/tegra/tegra210_ahub.c                    | 676 +++++++++++++++++
 sound/soc/tegra/tegra210_ahub.h                    | 127 ++++
 sound/soc/tegra/tegra210_dmic.c                    | 455 ++++++++++++
 sound/soc/tegra/tegra210_dmic.h                    |  82 +++
 sound/soc/tegra/tegra210_i2s.c                     | 812 +++++++++++++++++++++
 sound/soc/tegra/tegra210_i2s.h                     | 126 ++++
 sound/soc/tegra/tegra_cif.h                        |  65 ++
 sound/soc/tegra/tegra_pcm.c                        | 235 +++++-
 sound/soc/tegra/tegra_pcm.h                        |  21 +-
 25 files changed, 5251 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
 create mode 100644 sound/soc/tegra/tegra186_dspk.c
 create mode 100644 sound/soc/tegra/tegra186_dspk.h
 create mode 100644 sound/soc/tegra/tegra210_admaif.c
 create mode 100644 sound/soc/tegra/tegra210_admaif.h
 create mode 100644 sound/soc/tegra/tegra210_ahub.c
 create mode 100644 sound/soc/tegra/tegra210_ahub.h
 create mode 100644 sound/soc/tegra/tegra210_dmic.c
 create mode 100644 sound/soc/tegra/tegra210_dmic.h
 create mode 100644 sound/soc/tegra/tegra210_i2s.c
 create mode 100644 sound/soc/tegra/tegra210_i2s.h
 create mode 100644 sound/soc/tegra/tegra_cif.h

--
2.7.4

Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Small patchset to harden the SoundWire machine driver, change bad
HIDs, update PLL settings and avoid memory leaks. Given that the
SoundWire core parts are not upstream it's probably not necessary to
provide the patches to stable branches.

Bard Liao (1):
  ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name

Kai Vehmanen (2):
  ASoC: Intel: sof_sdw: add support for systems without i915 audio
  ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded

Libin Yang (1):
  ASoC: Intel: common: change match table ehl-rt5660

Pierre-Louis Bossart (1):
  ASoC: Intel: sof_sdw_rt711: remove properties in card remove

Yong Zhi (1):
  ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq

 sound/soc/intel/boards/sof_rt5682.c           |  9 +++++-
 sound/soc/intel/boards/sof_sdw.c              | 31 +++++++++++++------
 sound/soc/intel/boards/sof_sdw_common.h       |  2 ++
 sound/soc/intel/boards/sof_sdw_hdmi.c         |  6 ++++
 sound/soc/intel/boards/sof_sdw_rt711.c        | 17 +++++++++-
 .../intel/common/soc-acpi-intel-ehl-match.c   |  2 +-
 6 files changed, 54 insertions(+), 13 deletions(-)

base-commit: 22e9b543
--
2.25.1

Drop the repeated word "be" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200719003307.21403-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the doubled word "in" in a comment by adding punctuation
in 3 places and capitalization.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200719180901.30720-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Delete the doubled word "to" in two comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200719180912.30770-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>

One-element arrays are being deprecated[1]. Replace the one-element
array with a simple value type 'u8 reserved'[2], once it seems this
is just a placeholder for alignment.

[1] https://github.com/KSPP/linux/issues/79
[2] https://github.com/KSPP/linux/issues/86Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: kernel test robot <lkp@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/skylake-20200717.md
Link: https://lore.kernel.org/r/20200717215500.GA13910@embeddedorSigned-off-by: Mark Brown <broonie@kernel.org>

The Digital Speaker Controller (DSPK) converts the multi-bit Pulse Code
Modulation (PCM) audio input to oversampled 1-bit Pulse Density Modulation
(PDM) output. From the signal flow perpsective, the DSPK can be viewed as
a PDM transmitter that up-samples the input to the desired sampling rate
by interpolation then converts the oversampled PCM input to the desired
1-bit output via Delta Sigma Modulation (DSM).

This patch registers DSPK component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes DSPK interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The DSPK devices can be enabled in the DT via
"nvidia,tegra186-dspk" compatible binding. This driver can be used
on Tegra194 chip as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-7-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Audio Hub (AHUB) comprises a collection of hardware accelerators for
audio pre/post-processing and a programmable full crossbar (XBAR) for
routing audio data across these accelerators in time and in parallel.
AHUB supports multiple interfaces to I2S, DSPK, DMIC etc., XBAR is a
switch used to configure or modify audio routing between HW accelerators
present inside AHUB.

This patch registers AHUB component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes AHUB interfaces, which can be used to connect different
components in the ASoC layer. Currently the driver takes care of XBAR
programming to allow audio data flow through various clients of the AHUB.
Makefile and Kconfig support is added to allow to build the driver. The
AHUB component can be enabled in the DT via below compatible bindings.
  - "nvidia,tegra210-ahub" for Tegra210
  - "nvidia,tegra186-ahub" for Tegra186 and Tegra194
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-6-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Inter-IC Sound (I2S) controller implements full-duplex, bi-directional
and single direction point to point serial interface. It can interface
with I2S compatible devices. Tegra I2S controller can operate as both
master and slave.

This patch registers I2S controller with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes I2S interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The I2S devices can be enabled in the DT via
"nvidia,tegra210-i2s" compatible binding.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-5-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Digital MIC (DMIC) Controller is used to interface with Pulse Density
Modulation (PDM) input devices. The DMIC controller implements a converter
to convert PDM signals to Pulse Code Modulation (PCM) signals. From signal
flow perspective, the DMIC can be viewed as a PDM receiver.

This patch registers DMIC component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes DMIC interfaces, which can be used to connect different
components in the ASoC layer. Makefile and Kconfig support is added to
allow to build the driver. The DMIC devices can be enabled in the DT via
"nvidia,tegra210-dmic" compatible string. This driver can be used for
Tegra186 and Tegra194 chips as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-4-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

Audio Client Interface (CIF) is a proprietary interface employed to route
audio samples through Audio Hub (AHUB) components by inter connecting the
various modules.

This patch exports an inline function tegra_set_cif() which can be used,
for now, to program CIF on Tegra210 and later Tegra generations. Later it
can be extended to include helpers for legacy chips as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1595134890-16470-3-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds YAML schema for DT binding of AHUB and few of its
following components. These devices will be registered as ASoC
components and binding will be used on Tegra210 and later chips.
 * ADMAIF
 * I2S
 * DMIC
 * DSPK
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nvidia.com; s=n1;
	t=1595134894; bh=DX96zRQRNplPikN828HbAfbjGumAn9IgtktrsenKjgk=;
	h=X-PGP-Universal:From:To:CC:Subject:Date:Message-ID:X-Mailer:
	 In-Reply-To:References:X-NVConfidentiality:MIME-Version:
	 Content-Type;
	b=IhfGFjMxsnRHso1Ku2GEGC+mtLCy3AbRKPfgTS56XGqEWquUr/1s8n9tFpriqF7a+
	 tJGrTN9mKhRQGrwdey/AHsMY4Tbm4fKEWxIASgAV/lFPCfgP3BnVjEdHclc7FdBaB0
	 Qvd3zs8HFsgoIzksLrtHNMrUepkeZajn0/XnC7nghGDRim4+6Hauupr5kj/KVlihsS
	 KS1YQ2Zz9TZzLaC5QXALiHj3ATLvBFrmIf6Vj19q7hePt0menTZVzQNy+y3h4xZfLH
	 +OvBCsLgHGGhq+iM9rm64D+S5Op2vCslwq3Q/42TnYZ0vDbD7aA9nTAQzfYeI6HK6b
	 vi7eYbryzCTSg==
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-2-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

This configuration is for EHL with the RT5660 codec. RT5660
should use "10EC5660" ID instead of "INTC1027".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>