This patch makes the formatting of the comments in mac.h more
consistent.

* Where a heading takes up three comment lines it is reduced to one.
* A newline always separates column headings
Signed-off-by: Emrys Bayliss <emrys@paradise.net.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl errors in mac.h:
WARNING: line over 80 characters
Signed-off-by: Emrys Bayliss <emrys@paradise.net.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes some c99 errors in mac.h:
ERROR: do not use C99 // comments

All instances where the c99 comment occurs after a statement.
Signed-off-by: Emrys Bayliss <emrys@paradise.net.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch makes the formatting of the comments in mac.h more
consistent.

* Where a comment follows a statement, it is separated by a single
  space.
Signed-off-by: Emrys Bayliss <emrys@paradise.net.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes some of the following checkpatch.pl errors in mac.h:
ERROR: do not use C99 // comments

This patch truncates statements which are followed by empty c99
comments.
Signed-off-by: Emrys Bayliss <emrys@paradise.net.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl errors in mac.h:
ERROR: space prohibited before that ',' (ctx:WxW)
Signed-off-by: Emrys Bayliss <emrys@paradise.net.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a typo in kcomedilib_main.c file.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pcl812_ai_setup_dma() and pcl812_ai_setup_next_dma() functions are similar
other than the buffer switch and the inclusion of the "unread_samples" in
pcl818_ai_setup_next_dma() when calculating the dma size.

Merge these two functions by initializing the 'dma->cur_dma' in the callers
and passing '0' for the "unread_samples" when first starting the DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dma->size calculations are overly complicated in this driver and the
'prealloc_bufsz' sanity checks are unnecessary.

Currently this driver determines the number of DMA "runs" needed and the size
of the "last" DMA transfer in order to perform a command. As long as there are
more "runs" required, the dma->size is set to the buffer maxsize. On the last
"run" the buffer is set to the "last" size.

Refactor the driver to use the comedi core helpers to determine the DMA size
based on the buffer maxsize and the number of samples remaining in the command.

This allows removing the 'dma_runs_to_end' and 'last_dma_run' mamebers from
the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

THe pcl816_ai_setup_dma() and pcl816_ai_setup_next_dma() functions are similar
other than the buffer switch and the inclusion of the "unread_samples" in
pcl818_ai_setup_next_dma() when calculating the dma size.

Merge these two functions by initializing the 'dma->cur_dma' in the callers
and passing '0' for the "unread_samples" when first starting the DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently this driver determines the number of DMA "runs" needed and the size
of the "last" DMA transfer in order to perform a command. As long as there are
more "runs" required, the dma->size is set to the buffer maxsize. On the last
"run" the buffer is set to the "last" size.

Refactor the driver to use the comedi core helpers to determine the DMA size
based on the buffer maxsize and the number of samples remaining in the command.

This allows removing the 'dma_runs_to_end' and 'last_dma_run' mamebers from
the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

THe pcl818_ai_setup_dma() and pcl818_ai_setup_next_dma() functions are similar
other than the buffer switch and the inclusion of the "unread_samples" in
pcl818_ai_setup_next_dma() when calculating the dma size.

Merge these two functions by initializing the 'dma->cur_dma' in the callers
and passing '0' for the "unread_samples" when first starting the DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently this driver determines the number of DMA "runs" needed and the size
of the "last" DMA transfer in order to perform a command. As long as there are
more "runs" required, the dma->size is set to the buffer maxsize. On the last
"run" the buffer is set to the "last" size.

Refactor the driver to use the comedi core helpers to determine the DMA size
based on the buffer maxsize and the number of samples remaining in the command.

This allows removing the 'dma_runs_to_end' and 'last_dma_run' mamebers from
the private data. Also remove the 'ai_data_len' member which is set but never
used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The labpc driver has already had the depends on ISA_DMA_API limitation removed
by moving all the DMA support code into the labpc_isadma module.

For aesthetics, use the comedi_isadma module to provide the actual ISA DMA
support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a new helper module to consolidate all the ISA DMA code. This will
allow removing the "depends on ISA_DMA_API" from the legacy drivers that can
use DMA for async command support.

This module is complete based on the various uses of ISA DMA in the comedi
drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, pass the fill time 'ns' as a parameter to this function.

Refactor this function to calculate the transfer size in 'samples' instead
of 'bytes'. This removes the need to constantly multiply the values by the
'sample_size'. It also helps avoid any possible integer overflow issues.

Use the comedi_nsamples_left() helper to limit the samples when cmd->stop_src
is TRIG_COUNT.

Use comedi_samples_to_bytes() to return the final DMA size in bytes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_bytes_per_sample() helper to remove the hard coded sample_size
in suggest_transfer_size().

The helper function needs to comedi_subdevice pointer. Change the parameters
passed to suggest_transfer_size() and setup_dma() so that this pointer is
available. Rename these functions so they have namespace associated with the
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The external caller of labpc_drain_dma() does not enable the DMA transfer. Only
the call from handle_isa_dma() results in the programmed DMA operation getting
enabled.

For aesthetics, move the dma programming to handle_isa_dma(). Make sure the
DMA operation would actually do something (dma->size != 0) before programming
it to avoid enabling the DMA at the end of a stop_src == TRIG_COUNT command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up the code that determines the number of samples to read for the
current DMA transfer and how many samples are needed for the next DMA,
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to disable and the ISA DMA controller and
return the residue as described in Documentation/DMA-ISA-LPC.txt.

The DMA will always be disabled when labpc_setup_dma() is called. Remove
the unnecessary disable in that function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, convert this statis const global variable to a define.

Cleanup the maximum 'size' calc in labpc_suggest_transfer_size(). The modulo
operation will always result in '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_bytes_per_sample() helper and remove the hard coded sample
size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to disable and the ISA DMA controller and
return the residue as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to disable and the ISA DMA controller and
return the residue as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For asethetics, move the variable that holds the dma transfer 'size' into
the dma descriptor.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to disable and the ISA DMA controller and
return the residue as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to program the ISA DMA controller. Program
the ISA DMA as described in Documentation/DMA-ISA-LPC.txt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For asethetics, move the variable that holds the dma transfer 'size' into
the dma descriptor.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>