* pm-devfreq:
  PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs

Merge branch 'for-rafael' of git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq into pm-devfreq

Pull devfreq fix for 3.15-rc1 from MyungJoo Ham.

* 'for-rafael' of git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
  PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs

* acpi-processor:
  ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h
  ACPI / processor: Make it possible to get APIC ID via GIC
  ACPI / processor: Build idle_boot_override on x86 and ia64
  ACPI / processor: Use ACPI_PROCESSOR_DEVICE_HID instead of "ACPI0007"
  ACPI / processor: Fix acpi_processor_eval_pdc() return value type

The current devfreq_update_status() has the following bugs:
- If previous frequency doesn't have a valid level, it does an out of bounds
  access into the trans_table and causes memory corruption.
- When the new frequency doesn't have a valid level, the time spent in the
  new frequency is counted towards the next valid frequency switch instead of
  being ignored.
- The time spent on the previous frequency is added to the new frequency's
  stats instead of the previous frequency's stats.

This patch fixes all of this.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>

* pm-cpufreq: (30 commits)
  intel_pstate: Set core to min P state during core offline
  cpufreq: Add stop CPU callback to cpufreq_driver interface
  cpufreq: Remove unnecessary braces
  cpufreq: Fix checkpatch errors and warnings
  cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs
  cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}
  cpufreq: Do not allow ->setpolicy drivers to provide ->target
  cpufreq: arm_big_little: set 'physical_cluster' for each CPU
  cpufreq: arm_big_little: make vexpress driver depend on bL core driver
  cpufreq: SPEAr: Instantiate as platform_driver
  cpufreq: Remove unnecessary variable/parameter 'frozen'
  cpufreq: Remove cpufreq_generic_exit()
  cpufreq: add 'freq_table' in struct cpufreq_policy
  cpufreq: Reformat printk() statements
  cpufreq: Tegra: Use cpufreq_generic_suspend()
  cpufreq: s5pv210: Use cpufreq_generic_suspend()
  cpufreq: exynos: Use cpufreq_generic_suspend()
  cpufreq: Implement cpufreq_generic_suspend()
  cpufreq: suspend governors on system suspend/hibernate
  cpufreq: move call to __find_governor() to cpufreq_init_policy()
  ...

* pm-cpuidle:
  cpuidle: delay enabling interrupts until all coupled CPUs leave idle
  cpuidle: poll state can measure residency
  cpuidle: Move perf multiplier calculation out of the selection loop
  cpuidle: Do not substract exit latency from assumed sleep length
  cpuidle: Ensure menu coefficients stay within domain
  cpuidle: Use actual state latency in menu governor
  cpuidle: rename expected_us to next_timer_us in menu governor

* pm-runtime:
  PM / Runtime: Update runtime_idle() documentation for return value meaning

* pm-sleep:
  PM / sleep: Correct whitespace errors in <linux/pm.h>
  PM: Add missing "freeze" state
  PM / Hibernate: Spelling s/anonymouns/anonymous/
  PM / Runtime: Add missing "it" in comment
  PM / suspend: Remove unnecessary !!
  PCI / PM: Resume runtime-suspended devices later during system suspend
  ACPI / PM: Resume runtime-suspended devices later during system suspend
  PM / sleep: Set pm_generic functions to NULL for !CONFIG_PM_SLEEP
  PM: fix typo in comment
  PM / hibernate: use name_to_dev_t to parse resume
  PM / wakeup: Include appropriate header file in kernel/power/wakelock.c
  PM / sleep: Move prototype declaration to header file kernel/power/power.h
  PM / sleep: Asynchronous threads for suspend_late
  PM / sleep: Asynchronous threads for suspend_noirq
  PM / sleep: Asynchronous threads for resume_early
  PM / sleep: Asynchronous threads for resume_noirq
  PM / sleep: Two flags for async suspend_noirq and suspend_late

* pm-qos:
  PM / QoS: Add type to dev_pm_qos_add_ancestor_request() arguments
  ACPI / LPSS: Support for device latency tolerance PM QoS
  ACPI / scan: Add bind/unbind callbacks to struct acpi_scan_handler
  PM / QoS: Introcuce latency tolerance device PM QoS type
  PM / QoS: Add no_constraints_value field to struct pm_qos_constraints
  PM / QoS: Rename device resume latency QoS items

* pm-domains:
  PM / domains: Turn latency warning into debug message

* pm-drivers:
  PM: Add pm_runtime_suspend|resume_force functions
  PM / runtime: Fetch runtime PM callbacks using a macro

* misc:
  MAINTAINERS: Reorder maintainer addresses for PM and ACPI

* powercap:
  powercap / intel_rapl: spell out SoC names
  powercap / intel_rapl: relax sanity check on energy counters

* acpica: (29 commits)
  ACPICA: Revert "Headers: Deploy #pragma pack (push) and (pop)."
  ACPICA: Update version to 20140214.
  ACPICA: Prevent infinite loops when traversing corrupted lists.
  ACPICA: Debugger: Add missing objects; Traverse linked lists
  ACPICA: Add text: ACPICA policy for new _OSI strings. No functional change.
  ACPICA: Update for _PRP predefined name.
  ACPICA: Cleanup/improve global variable declarations.
  ACPICA: Comment update - no functional change.
  ACPICA: Do not abort _PRT repair on a single subpackage failure.
  ACPICA: Harden _PRT repair code; check for minimum package length.
  ACPICA: Restore code that repairs NULL package elements in return values.
  ACPICA: Properly handle NULL entries in _PRT return packages.
  ACPICA: Update conditional compilation flags for resource dump functions.
  ACPICA: Predefined names: Add support for the _PRP method.
  ACPICA: Headers: Deploy #pragma pack (push) and (pop).
  ACPICA: Add boot option to disable auto return object repair
  ACPICA: acpidump: Remove integer types translation protection.
  ACPICA: acpidump: Add sparse declarators support.
  ACPICA: Add "Windows 2013" string to _OSI support.
  ACPICA: Update version to 20140114.
  ...

* acpi-battery:
  ACPI / AC: recheck adapter status upon battery status changes
  ACPI / battery: call ACPI notifier chain in acpi_battery_notify
  ACPI / battery: move some ACPI_BATTERY_* definitions to header

* acpi-video:
  video / output: Drop display output class support
  fujitsu-laptop: Drop unneeded include
  acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / video: fix ACPI_VIDEO dependencies

* acpi-cleanup:
  ACPI: Remove duplicate definitions of PREFIX
  ACPI / tables: Replace printk with pr_*

* acpi-thermal:
  ACPI / thermal: make acpi_thermal_check asynchronous on resume

* acpi-pci:
  ACPI / PCI: Do not call ISA-specific code if ISA is not supported

* acpi-lpss:
  ACPI / LPSS: Add Intel BayTrail ACPI mode PWM

* acpi-button:
  ACPI / button: Add ACPI Button event via netlink routine

rjw> Why exactly are they errors?
Geert> checkpatch.pl says: "WARNING: please, no space before tabs",
       Vim (with "let c_space_errors=1") shows them in red.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Change to use the new ->stop_cpu() callback to do clean up during CPU
hotplug. The requested P state for an offline core will be used by the
hardware coordination function to select the package P state. If the
core is under load when it is offlined it will fix the package P state
floor to the requested P state of offline core.
Reported-by: Patrick Marlier <patrick.marlier@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This callback allows the driver to do clean up before the CPU is
completely down and its state cannot be modified.  This is used
by the intel_pstate driver to reduce the requested P state prior to
the core going away.  This is required because the requested P state
of the offline core is used to select the package P state. This
effectively sets the floor package P state to the requested P state on
the offline core.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
[rjw: Minor modifications]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove unnecessary braces from a single statement.
Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix 2 checkpatch errors about using assignment in if condition,
1 checkpatch error about a required space after comma
and 3 warnings about line over 80 characters.
Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to the data provided by HW Team, at least 12 internal platform
clock cycles are required to stabilize a DFS clock switch on FSL e500mc Socs.
This patch replaces the CPUFREQ_ETERNAL with appropriate HW clock transition
latency to make DFS governors work normally on Freescale e500mc boards.
Signed-off-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

For a few subsystems I am the person who actually applies patches
and people don't CC me on patch submissions, because my address is
not the first one in the given MAINTAINERS item.

Reorder PM and ACPI maintainer addresses in MAINTAINERS to make
the probability of that a bit smaller.
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Pavel Machek <pavel@ucw.cz>

As of commit 45f0a85c ('PM / Runtime: Rework the "runtime idle"
helper routine'), the return value of ->runtime_idle() is no longer
ignored by the PM core, but used to decide whether to suspend the
device or not.

Update the documentation to match the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It was only ever used by the ACPI video driver, and that only use case
vanished over 3 years ago (see commit 677bd810, "ACPI video: remove
output switching control".) So this is dead code and I guess we can
remove it now.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The fujitsu-laptop driver includes <linux/video_output.h> but doesn't
call any of its functions. Drop the unneeded include to avoid
unnecessary driver rebuilds.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_VIDEO stopped depending on VIDEO_OUTPUT_CONTROL over 3 years ago
(see commit 677bd810, "ACPI video: remove output switching control".)
So it's about time to remove the Kconfig dependency between these two
options.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Two cpufreq notifiers CPUFREQ_RESUMECHANGE and CPUFREQ_SUSPENDCHANGE have
not been used for some time, so remove them to clean up code a bit.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq drivers that provide the ->setpolicy() callback are supposed
to have integrated governors, so they don't need to set ->target()
or ->target_index() and may confuse the core if any of these callbacks
is present.

For this reason, add a check preventing ->setpolicy cpufreq drivers
from registering if they have non-NULL ->target or ->target_index.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

We have a per-CPU variable for managing which cluster a CPU belongs to.
Currently, physical_cluster is set for policy->cpu only which leads to
the following on some SoC's:

 - There are two clusters:
   - Cluster 0 has four ARM Cortex A7 CPUs (slower ones): 0,1,2,3
   - Cluster 1 has four ARM Cortex A15 CPUs (faster ones): 4,5,6,7
 - CPUs are booted in order 0,1..7 and so initially policy->cpu for A7 cluster
   would be 0 and for A15 cluster would be 4.
 - Now CPU4 (i.e. A15_0) is hotplugged out and so policy->cpu for A15 cluster
   becomes 5 (i.e. A15_1).
 - But physical cluster is only set for CPU0 and CPU4 in ARM big LITTLE driver
   and isn't updated.
 - Now freq change request comes for A15 cluster and we would try to update freq
   of physical_cluster of CPU5, i.e. A15_1. And it is currently set to zero
   (default value of uninitialized global variables).
 - And so we actually try to change freq of A7 cluster instead of A15.
 - This also results in kernel crash as sometimes we might request freq above
   A7's limit and CPU may behave badly..

Fix this by initializing physical_cluster for all CPUs of a policy.

Based on previous work by Xin Wang.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently vexpress big LITTLE driver selects ARM_BIG_LITTLE_CPUFREQ, so
if CONFIG_BIG_LITTLE isn't enabled and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ
is enabled, we get the following build warnings:

warning: (ARM_VEXPRESS_SPC_CPUFREQ) selects ARM_BIG_LITTLE_CPUFREQ which has
unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && (ARM || ARM64) && ARM
&& BIG_LITTLE && ARM_CPU_TOPOLOGY && HAVE_CLK)

To fix this, make ARM_VEXPRESS_SPC_CPUFREQ depend on ARM_BIG_LITTLE_CPUFREQ
instead of selecting it.

This also moves the entry for ARM_VEXPRESS_SPC_CPUFREQ along with other
big LITTLE config entries.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 1696d9dc (ACPI: Remove the old /proc/acpi/event interface)
removed ACPI Button event which originally was sent to userspace via
/proc/acpi/event. This caused ACPI shutdown regression on gentoo
in VirtualBox. Now ACPI events are sent to userspace via netlink,
so add ACPI Button event back via netlink routine.

References: https://bugzilla.kernel.org/show_bug.cgi?id=71721Reported-and-tested-by: Richard Musil <richard.musil@gmail.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

We already have a macro for PREFIX of "ACPI: " in
drivers/acpi/internal.h, so remove the duplicate ones
in ACPI drivers when internal.h is included.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

On HP Pavilion dv6-6179er there are no notifications when AC adapter
is plugged/unplugged.
However, when AC status is read (acpi_ac_get_state), and if AC status
has changed, AML code triggers the notification.

This patch solves the problem by re-reading AC adapter status upon
ACPI_BATTERY_NOTIFY_STATUS notification.
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Allow other drivers to subscribe to battery status notifications.
Just like AC driver does.
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_BATTERY_CLASS is used in multiple places.
Also, I'll use ACPI_BATTERY_NOTIFY_STATUS inside AC driver in
one of following patches.

So, create a header file and move ACPI_BATTERY_CLASS and
ACPI_BATTERY_NOTIFY_* definitions into it.
Also, remove copy of ACPI_BATTERY_CLASS from sbs.c
Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit aae576e5faefa8ba70647efa320d4747b6375f1e.
Push and Pop are not portable "enough", and caused problems for
some ACPICA customers.
Signed-off-by: Robert Moore <Robert.Moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Conflicts:
	include/acpi/platform/aclinux.h

Version 20140214.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change hardens the ACPICA code to detect circular linked object
lists and prevent an infinite loop if such corruption exists.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change adds support for two missing objects, the "extra" and
"data" secondary objects, as well as adding support to traverse and
display linked lists related to ACPICA objects.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Adds further information about why new _OSI strings should be
adopted by all hosts as soon as possible.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>