- 23 Mar, 2011 40 commits
-
-
David Henningsson authored
commit 0a3fabe3 upstream. Do not initialize again the what has already been initialized as multi outs, as this breaks surround speakers. Tested-by: Bartłomiej Żogała <nusch88@gmail.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Henningsson authored
commit 7e59e097 upstream. Without this change, a volume control named "Surround" or "Side" would get an unnecessary index, causing it to be ignored by the vmaster and PulseAudio. Tested-by: Bartłomiej Żogała <nusch88@gmail.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Henningsson authored
commit ebbeb3d6 upstream. When more than one pair of internal speakers is present, allow names according to their channels. Tested-by: Bartłomiej Żogała <nusch88@gmail.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Henningsson authored
commit 32eea388 upstream. The pin config values would change the association instead of the sequence, this commit fixes that up. Tested-by: Bartłomiej Żogała <nusch88@gmail.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Zimmerman authored
commit 500132a0 upstream. Use the Mult and bMaxBurst values from the endpoint companion descriptor to calculate the max length of an isoc transfer. Add USB_SS_MULT macro to access Mult field of bmAttributes, at Sarah's suggestion. This patch should be queued for the 2.6.36 and 2.6.37 stable trees, since those were the first kernels to have isochronous support for SuperSpeed devices. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
commit 01a1fdb9 upstream. When an endpoint stalls, we need to update the xHCI host's internal dequeue pointer to move it past the stalled transfer. This includes updating the cycle bit (TRB ownership bit) if we have moved the dequeue pointer past a link TRB with the toggle cycle bit set. When we're trying to find the new dequeue segment, find_trb_seg() is supposed to keep track of whether we've passed any link TRBs with the toggle cycle bit set. However, this while loop's body while (cur_seg->trbs > trb || &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) { Will never get executed if the ring only contains one segment. find_trb_seg() will return immediately, without updating the new cycle bit. Since find_trb_seg() has no idea where in the segment the TD that stalled was, make the caller, xhci_find_new_dequeue_state(), check for this special case and update the cycle bit accordingly. This patch should be queued to kernels all the way back to 2.6.31. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
commit bf161e85 upstream. When an endpoint stalls, the xHCI driver must move the endpoint ring's dequeue pointer past the stalled transfer. To do that, the driver issues a Set TR Dequeue Pointer command, which will complete some time later. Takashi was having issues with USB 1.1 audio devices that stalled, and his analysis of the code was that the old code would not update the xHCI driver's ring dequeue pointer after the command completes. However, the dequeue pointer is set in xhci_find_new_dequeue_state(), just before the set command is issued to the hardware. Setting the dequeue pointer before the Set TR Dequeue Pointer command completes is a dangerous thing to do, since the xHCI hardware can fail the command. Instead, store the new dequeue pointer in the xhci_virt_ep structure, and update the ring's dequeue pointer when the Set TR dequeue pointer command completes. While we're at it, make sure we can't queue another Set TR Dequeue Command while the first one is still being processed. This just won't work with the internal xHCI state code. I'm still not sure if this is the right thing to do, since we might have a case where a driver queues multiple URBs to a control ring, one of the URBs Stalls, and then the driver tries to cancel the second URB. There may be a race condition there where the xHCI driver might try to issue multiple Set TR Dequeue Pointer commands, but I would have to think very hard about how the Stop Endpoint and cancellation code works. Keep the fix simple until when/if we run into that case. This patch should be queued to kernels all the way back to 2.6.31. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
commit 9b37596a upstream. The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthew Garrett authored
commit 294d95f2 upstream. If a device plug/unplug is detected on an ATI SB700 USB controller in D3, it appears to set the port status register but not the controller status register. As a result we'll fail to detect the plug event. Check the port status register on resume as well in order to catch this case. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastian Andrzej Siewior authored
commit b14e840d upstream. The document says: |2.1 Problem description | When at least two USB devices are simultaneously running, it is observed that | sometimes the INT corresponding to one of the USB devices stops occurring. This may | be observed sometimes with USB-to-serial or USB-to-network devices. | The problem is not noticed when only USB mass storage devices are running. |2.2 Implication | This issue is because of the clearing of the respective Done Map bit on reading the ATL | PTD Done Map register when an INT is generated by another PTD completion, but is not | found set on that read access. In this situation, the respective Done Map bit will remain | reset and no further INT will be asserted so the data transfer corresponding to that USB | device will stop. |2.3 Workaround | An SOF INT can be used instead of an ATL INT with polling on Done bits. A time-out can | be implemented and if a certain Done bit is never set, verification of the PTD completion | can be done by reading PTD contents (valid bit). | This is a proven workaround implemented in software. Russell King run into this with an USB-to-serial converter. This patch implements his suggestion to enable the high frequent SOF interrupt only at the time we have ATL packages queued. It goes even one step further and enables the SOF interrupt only if we have more than one ATL packet queued at the same time. Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Larry Finger authored
commit 6410db59 upstream. The driver for the RTL8187L chips returns IEEE80211_TX_STAT_ACK for all packets, even if the maximum number of retries was exhausted. In addition it fails to setup max_rates in the ieee80211_hw struct, This behavior may be responsible for the problems noted in Bug 14168. As the bug is very old, testers have not been found, and I do not have the case where the indicated signal is less than -70 dBm. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Contreras authored
commit ab42abf3 upstream. We need to protect not only the dmm_map list, but the individual map_obj's, otherwise, we might be building the scatter-gather list with garbage. So, use the existing proc_lock for that. I observed race conditions which caused kernel panics while running stress tests, also, Tuomas Kulve found it happening quite often in Gumstix Over. This patch fixes those. Cc: Tuomas Kulve <tuomas@kulve.fi> Signed-off-by: Felipe Contreras <felipe.contreras@nokia.com> Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Mahoney authored
commit cecf826d upstream. linux/delay.h is pulled in somehow on x86 but not on ia64 or powerpc. This fixes a build failure on those arches since they use [mu]delay. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
wangyanqing authored
commit d0781383 upstream. I picked up a new DAK-780EX(professional digitl reverb/mix system), which use CH341T chipset to communication with computer on 3/2011 and the CH341T's vendor code is 1a86 Looking up the CH341T's vendor and product id's I see: 1a86 QinHeng Electronics 5523 CH341 in serial mode, usb to serial port converter CH341T,CH341 are the products of the same company, maybe have some common hardware, and I test the ch341.c works well with CH341T Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Herton Ronaldo Krzesinski authored
commit 7a89e4cb upstream. On https://bugs.launchpad.net/ubuntu/+source/linux/+bug/636091, one of the cases reported is a big timeout on option_send_setup, which causes some side effects as tty_lock is held. Looks like some of ZTE MF626 devices also don't like the RTS/DTR setting in option_send_setup, like with 4G XS Stick W14. The reporter confirms which this it solves the long freezes in his system. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jiri Slaby authored
commit 6960f40a upstream. Make sure that we check the return value of tty_port_tty_get. Sometimes it may return NULL and we later dereference that. The only place here is in kobil_read_int_callback, so fix it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
commit 969e3033 upstream. When a driver doesn't know how much data a device is going to send, the buffer size should be at least as big as the endpoint's maxpacket value. The serial drivers don't follow this rule; many of them request only 256-byte bulk-in buffers. As a result, they suffer overflow errors if a high-speed device wants to send a lot of data, because high-speed bulk endpoints are required to have a maxpacket size of 512. This patch (as1450) fixes the problem by using the driver's bulk_in_size value as a minimum, always allocating buffers no smaller than the endpoint's maxpacket size. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Flynn Marquardt <flynn@flynnux.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Yin Kangkai authored
commit 0d0389e5 upstream. In 8250.c original ns16550 autoconfig code, we change the divisor latch when we goto to high speed mode, we're assuming the previous speed is legacy. This some times is not true. For example in a system with both CONFIG_SERIAL_8250 and CONFIG_SERIAL_8250_PNP set, in this case, the code (autoconfig) will be called twice, one in serial8250_init/probe() and the other is from serial_pnp_probe. When serial_pnp_probe calls the autoconfig for NS16550A, it's already in high speed mode, change the divisor latch (quot << 3) in this case will make the UART console garbled. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Yin Kangkai authored
commit 95926d2d upstream. For any reason if the NS16550A was not work in high speed mode (e.g. we hold NS16550A from going to high speed mode in autoconfig_16550a()), now we are resume from suspend, we should also set the uartclk to the correct value. Otherwise it is still the old 1843200 and that will bring issues. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
commit d8653d30 upstream. This is used to store the spi_device ->modalias so they have to be the same size. SPI_NAME_SIZE is 32. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Felix Fietkau authored
commit 2e286947 upstream. The hardware rx filter flag triggered by FIF_PROMISC_IN_BSS is overly broad and covers even frames with PHY errors. When this flag is enabled, this message shows up frequently during scanning or hardware resets: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up Since promiscuous mode is usually not particularly useful, yet enabled by default by bridging (either used normally in 4-addr mode, or with hacks for various virtualization software), we should sacrifice it for better reliability during normal operation. This patch leaves it enabled if there are active monitor mode interfaces, since it's very useful for debugging. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Senthil Balasubramanian authored
commit ac45c12d upstream. There are few places where we are checking for macversion and revsions before RTC is powered ON. However we are reading the macversion and revisions only after RTC is powered ON and so both macversion and revisions are actully zero and this leads to incorrect srev checks Incorrect srev checks can cause registers to be configured wrongly and can cause unexpected behavior. Fixing this seems to address the ASPM issue that we have observed. The laptop becomes very slow and hangs mostly with ASPM L1 enabled without this fix. fix this by reading the macversion and revisisons even before we start using them. There is no reason why should we delay reading this info until RTC is powered on as this is just a register information. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Senthil Balasubramanian authored
commit 0a8d7cb0 upstream. We need to read and backup AR_WA register value permanently and reading this after the chip is awakened results in this register being zeroed out. This seems to fix the ASPM with L1 enabled issue that we have observed. The laptop becomes very slow and hangs mostly with ASPM L1 enabled without this fix. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Chris Wilson authored
commit 007c80a5 upstream. As detect will use hw registers and may modify structures, it needs to be serialised by use of the dev->mode_config.mutex. Make it so. Otherwise, we may cause random crashes as the sysfs file is queried whilst a concurrent hotplug poll is being run. For example: [ 1189.189626] BUG: unable to handle kernel NULL pointer dereference at 00000100 [ 1189.189821] IP: [<e0c22019>] intel_tv_detect_type+0xa2/0x203 [i915] [ 1189.190020] *pde = 00000000 [ 1189.190104] Oops: 0000 [#1] SMP [ 1189.190209] last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-SVIDEO-1/status [ 1189.190412] Modules linked in: mperf cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_stats decnet uinput fuse loop joydev snd_hd a_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm i915 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq drm_kms_helper snd_timer uvcvideo d rm snd_seq_device eeepc_laptop tpm_tis usbhid videodev i2c_algo_bit v4l1_compat snd sparse_keymap i2c_core hid serio_raw tpm psmouse evdev tpm_bios rfkill shpchp ac processor rng_c ore battery video power_supply soundcore pci_hotplug button output snd_page_alloc usb_storage uas ext3 jbd mbcache sd_mod crc_t10dif ata_generic ahci libahci ata_piix libata uhci_h cd ehci_hcd scsi_mod usbcore thermal atl2 thermal_sys nls_base [last unloaded: scsi_wait_scan] [ 1189.192007] [ 1189.192007] Pid: 1464, comm: upowerd Not tainted 2.6.37-2-686 #1 ASUSTeK Computer INC. 701/701 [ 1189.192007] EIP: 0060:[<e0c22019>] EFLAGS: 00010246 CPU: 0 [ 1189.192007] EIP is at intel_tv_detect_type+0xa2/0x203 [i915] [ 1189.192007] EAX: 00000000 EBX: dca74000 ECX: e0f68004 EDX: 00068004 [ 1189.192007] ESI: dd110c00 EDI: 400c0c37 EBP: dca7429c ESP: de365e2c [ 1189.192007] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1189.192007] Process upowerd (pid: 1464, ti=de364000 task=dcc8acb0 task.ti=de364000) [ 1189.192007] Stack: Mar 15 03:43:23 hostname kernel: [ 1189.192007] e0c2cda4 70000000 400c0c30 00000000 dd111000 de365e54 de365f24 dd110c00 [ 1189.192007] e0c22203 01000000 00000003 00000000 00000000 00000000 00000000 4353544e [ 1189.192007] 30383420 00000069 00000000 00000000 00000000 00000000 00000000 00000000 [ 1189.192007] Call Trace: Mar 15 03:43:23 hostname kernel: [ 1189.192007] [<e0c22203>] ? intel_tv_detect+0x89/0x12d [i915] [ 1189.192007] [<e0a9dcef>] ? status_show+0x0/0x2f [drm] [ 1189.192007] [<e0a9dd03>] ? status_show+0x14/0x2f [drm] [Digression: what is upowerd doing reading those power hungry files?] Reported-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alex Deucher authored
commit 942b0e95 upstream. Typo in the aspect scale setup. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Chris Wilson authored
commit 8692d00e upstream. I stumbled over this magic bit in the gen3 INSTPM: Bit11 Interrupt-Based AGPBUSY# Enable: ‘0’ = Pending GMCH interrupts will not cause AGPBUSY# assertion. ‘1’ = Pending GMCH interrupts will cause AGPBUSY# assertion and hence can cause the CPU to exit C3. There is no suppression of cacheable writes. Note that in either case in C3 the interrupts are not lost. They will be forwarded to the ICH when the GMCH is out of C3. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tetsuo Handa authored
commit eae61f3c upstream. In tomoyo_check_open_permission() since 2.6.36, TOMOYO was by error recalculating already calculated pathname when checking allow_rewrite permission. As a result, memory will leak whenever a file is opened for writing without O_APPEND flag. Also, performance will degrade because TOMOYO is calculating pathname regardless of profile configuration. This patch fixes the leak and performance degrade. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mathieu Desnoyers authored
commit 0e00f7ae upstream. Intel Archiecture Software Developer's Manual section 7.1.3 specifies that a core serializing instruction such as "cpuid" should be executed on _each_ core before the new instruction is made visible. Failure to do so can lead to unspecified behavior (Intel XMC erratas include General Protection Fault in the list), so we should avoid this at all cost. This problem can affect modified code executed by interrupt handlers after interrupt are re-enabled at the end of stop_machine, because no core serializing instruction is executed between the code modification and the moment interrupts are reenabled. Because stop_machine_text_poke performs the text modification from the first CPU decrementing stop_machine_first, modified code executed in thread context is also affected by this problem. To explain why, we have to split the CPUs in two categories: the CPU that initiates the text modification (calls text_poke_smp) and all the others. The scheduler, executed on all other CPUs after stop_machine, issues an "iret" core serializing instruction, and therefore handles core serialization for all these CPUs. However, the text modification initiator can continue its execution on the same thread and access the modified text without any scheduler call. Given that the CPU that initiates the code modification is not guaranteed to be the one actually performing the code modification, it falls into the XMC errata. Q: Isn't this executed from an IPI handler, which will return with IRET (a serializing instruction) anyway? A: No, now stop_machine uses per-cpu workqueue, so that handler will be executed from worker threads. There is no iret anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20110303160137.GB1590@Krystal> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Steven J. Magnani authored
commit 6f3946b4 upstream. A userland read of more than PAGE_SIZE bytes from /dev/zero results in (a) not all of the bytes returned being zero, and (b) memory corruption due to zeroing of bytes beyond the user buffer. This is caused by improper constraints on the assembly __clear_user function. The constrints don't indicate to the compiler that the pointer argument is modified. Since the function is inline, this results in double-incrementing of the pointer when __clear_user() is invoked through a multi-page read() of /dev/zero. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andreas Herrmann authored
commit 1d3e09a3 upstream. Commit 7f74f8f2 (x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems) introduced a regression. It removed some SB600 specific code to determine the revision ID without adapting a corresponding revision ID check for SB600. See this mail thread: http://marc.info/?l=linux-kernel&m=129980296006380&w=2 This patch adapts the corresponding check to cover all SB600 revisions. Tested-by: Wang Lei <f3d27b@gmail.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20110315143137.GD29499@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sean Hefty authored
commit 29963437 upstream. When processing a SIDR REQ, the ib_cm allocates a new cm_id. The refcount of the cm_id is initialized to 1. However, cm_process_work will decrement the refcount after invoking all callbacks. The result is that the cm_id will end up with refcount set to 0 by the end of the sidr req handler. If a user tries to destroy the cm_id, the destruction will proceed, under the incorrect assumption that no other threads are referencing the cm_id. This can lead to a crash when the cm callback thread tries to access the cm_id. This problem was noticed as part of a larger investigation with kernel crashes in the rdma_cm when running on a real time OS. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Linus Torvalds authored
commit 34d211a2 upstream. It turns out that while a maximum of 8 partitions may be what people "should" have had, you can actually fit up to 18 entries(*) in a sector. And some people clearly were taking advantage of that, like Michael Cree, who had ten partitions on one of his OSF disks. (*) The OSF partition data starts at byte offset 64 in the first sector, and the array of 16-byte partition entries start at offset 148 in the on-disk partition structure. Reported-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sean Hefty authored
commit 25ae21a1 upstream. Doug Ledford and Red Hat reported a crash when running the rdma_cm on a real-time OS. The crash has the following call trace: cm_process_work cma_req_handler cma_disable_callback rdma_create_id kzalloc init_completion cma_get_net_info cma_save_net_info cma_any_addr cma_zero_addr rdma_translate_ip rdma_copy_addr cma_acquire_dev rdma_addr_get_sgid ib_find_cached_gid cma_attach_to_dev ucma_event_handler kzalloc ib_copy_ah_attr_to_user cma_comp [ preempted ] cma_write copy_from_user ucma_destroy_id copy_from_user _ucma_find_context ucma_put_ctx ucma_free_ctx rdma_destroy_id cma_exch cma_cancel_operation rdma_node_get_transport rt_mutex_slowunlock bad_area_nosemaphore oops_enter They were able to reproduce the crash multiple times with the following details: Crash seems to always happen on the: mutex_unlock(&conn_id->handler_mutex); as conn_id looks to have been freed during this code path. An examination of the code shows that a race exists in the request handlers. When a new connection request is received, the rdma_cm allocates a new connection identifier. This identifier has a single reference count on it. If a user calls rdma_destroy_id() from another thread after receiving a callback, rdma_destroy_id will proceed to destroy the id and free the associated memory. However, the request handlers may still be in the process of running. When control returns to the request handlers, they can attempt to access the newly created identifiers. Fix this by holding a reference on the newly created rdma_cm_id until the request handler is through accessing it. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tejun Heo authored
commit eb0e85e3 upstream. ata_eh_analyze_serror() suppresses hotplug notifications if LPM is being used because LPM generates spurious hotplug events. It compared whether link->lpm_policy was different from ATA_LPM_MAX_POWER to determine whether LPM is enabled; however, this is incorrect as for drivers which don't implement LPM, lpm_policy is always ATA_LPM_UNKNOWN. This disabled hotplug detection for all drivers which don't implement LPM. Fix it by comparing whether lpm_policy is greater than ATA_LPM_MAX_POWER. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Per Jessen authored
commit 467b41c6 upstream. Recognize Marvell 88SE9125 PCIe SATA 6.0 Gb/s controller. Signed-off-by: Per Jessen <per@computer.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Seth Heasley authored
commit 64a3903d upstream. This patch adds an updated SATA RAID DeviceID for the Intel Patsburg PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kamal Mostafa authored
commit 9a6d44b9 upstream. Emit warning when "mem=nopentium" is specified on any arch other than x86_32 (the only that arch supports it). Signed-off-by: Kamal Mostafa <kamal@canonical.com> BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <1296783486-23033-2-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kamal Mostafa authored
commit 77eed821 upstream. Avoid removing all of memory and panicing when "mem={invalid}" is specified, e.g. mem=blahblah, mem=0, or mem=nopentium (on platforms other than x86_32). Signed-off-by: Kamal Mostafa <kamal@canonical.com> BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <1296783486-23033-1-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Steven Rostedt authored
commit 868baf07 upstream. When the fuction graph tracer starts, it needs to make a special stack for each task to save the real return values of the tasks. All running tasks have this stack created, as well as any new tasks. On CPU hot plug, the new idle task will allocate a stack as well when init_idle() is called. The problem is that cpu hotplug does not create a new idle_task. Instead it uses the idle task that existed when the cpu went down. ftrace_graph_init_task() will add a new ret_stack to the task that is given to it. Because a clone will make the task have a stack of its parent it does not check if the task's ret_stack is already NULL or not. When the CPU hotplug code starts a CPU up again, it will allocate a new stack even though one already existed for it. The solution is to treat the idle_task specially. In fact, the function_graph code already does, just not at init_idle(). Instead of using the ftrace_graph_init_task() for the idle task, which that function expects the task to be a clone, have a separate ftrace_graph_init_idle_task(). Also, we will create a per_cpu ret_stack that is used by the idle task. When we call ftrace_graph_init_idle_task() it will check if the idle task's ret_stack is NULL, if it is, then it will assign it the per_cpu ret_stack. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Trond Myklebust authored
commit c83ce989 upstream. The new vfs locking scheme introduced in 2.6.38 breaks NFS sillyrename because the latter relies on being able to determine the parent directory of the dentry in the ->iput() callback in order to send the appropriate unlink rpc call. Looking at the code that cares about races with dput(), there doesn't seem to be anything that specifically uses d_parent as a test for whether or not there is a race: - __d_lookup_rcu(), __d_lookup() all test for d_hashed() after d_parent - shrink_dcache_for_umount() is safe since nothing else can rearrange the dentries in that super block. - have_submount(), select_parent() and d_genocide() can test for a deletion if we set the DCACHE_DISCONNECTED flag when the dentry is removed from the parent's d_subdirs list. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-