Commits · 12c44aba6618b7f6c437076e5722237190f6cd5f · nexedi / linux

18 Jan, 2019 1 commit

netfilter: nft_compat: use refcnt_t type for nft_xt reference count · 12c44aba

Florian Westphal authored Jan 14, 2019

Using standard integer type was fine while all operations on it were
guarded by the nftnl subsys mutex.

This isn't true anymore:
1. transactions are guarded only by a pernet mutex, so concurrent
   rule manipulation in different netns is racy
2. the ->destroy hook runs from a work queue after the transaction
   mutex has been released already.

cpu0                           cpu1 (net 1)        cpu2 (net 2)
 kworker
    nft_compat->destroy        nft_compat->init    nft_compat->init
      if (--nft_xt->ref == 0)   nft_xt->ref++        nft_xt->ref++

Switch to refcount_t.  Doing this however only fixes a minor aspect,
nft_compat also performs linked-list operations in an unsafe way.

This is addressed in the next two patches.

Fixes: f102d66b ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Fixes: 0935d558 ("netfilter: nf_tables: asynchronous release")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

12c44aba

17 Jan, 2019 6 commits

af_packet: fix raw sockets over 6in4 tunnel · 88a8121d

Nicolas Dichtel authored Jan 17, 2019

Since commit cb9f1b78, scapy (which uses an AF_PACKET socket in
SOCK_RAW mode) is unable to send a basic icmp packet over a sit tunnel:

Here is a example of the setup:
$ ip link set ntfp2 up
$ ip addr add 10.125.0.1/24 dev ntfp2
$ ip tunnel add tun1 mode sit ttl 64 local 10.125.0.1 remote 10.125.0.2 dev ntfp2
$ ip addr add fd00:cafe:cafe::1/128 dev tun1
$ ip link set dev tun1 up
$ ip route add fd00:200::/64 dev tun1
$ scapy
>>> p = []
>>> p += IPv6(src='fd00:100::1', dst='fd00:200::1')/ICMPv6EchoRequest()
>>> send(p, count=1, inter=0.1)
>>> quit()
$ ip -s link ls dev tun1 | grep -A1 "TX.*errors"
    TX: bytes  packets  errors  dropped carrier collsns
    0          0        1       0       0       0

The problem is that the network offset is set to the hard_header_len of the
output device (tun1, ie 14 + 20) and in our case, because the packet is
small (48 bytes) the pskb_inet_may_pull() fails (it tries to pull 40 bytes
(ipv6 header) starting from the network offset).

This problem is more generally related to device with variable hard header
length. To avoid a too intrusive patch in the current release, a (ugly)
workaround is proposed in this patch. It has to be cleaned up in net-next.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=993675a3100b1
Link: http://patchwork.ozlabs.org/patch/1024489/
Fixes: cb9f1b78 ("ip: validate header length on virtual device xmit")
CC: Willem de Bruijn <willemb@google.com>
CC: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

88a8121d

udp6: add missing rehash callback to udplite · f7c46156

Alexey Kodanev authored Jan 16, 2019

After commit 23b0269e ("net: udp6: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.

This is related to the problem addressed in the commit 719f8358
("udp: add rehash on connect()"). Moreover, __udp6_lib_lookup() now
looks for a socket immediately in the secondary hash table.

And this issue was found with LTP/network tests as well.

Fixes: 23b0269e ("net: udp6: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

f7c46156

udp: add missing rehash callback to udplite · 8f6b5392

Alexey Kodanev authored Jan 16, 2019

After commit 4cdeeee9 ("net: udp: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.

This is related to the problem addressed in the commit 719f8358
("udp: add rehash on connect()"). Moreover, __udp4_lib_lookup() now
looks for a socket immediately in the secondary hash table.

The issue was found with LTP/network tests (UDP-Lite test-cases).

Fixes: 4cdeeee9 ("net: udp: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8f6b5392

net/sched: cls_flower: allocate mask dynamically in fl_change() · 2cddd201

Ivan Vecera authored Jan 16, 2019

Recent changes (especially 05cd271f ("cls_flower: Support multiple
masks per priority")) in the fl_flow_mask structure grow it and its
current size e.g. on x86_64 with defconfig is 760 bytes and more than
1024 bytes with some debug options enabled. Prior the mentioned commit
its size was 176 bytes (using defconfig on x86_64).
With regard to this fact it's reasonable to allocate this structure
dynamically in fl_change() to reduce its stack size.

v2:
- use kzalloc() instead of kcalloc()

Fixes: 05cd271f ("cls_flower: Support multiple masks per priority")
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2cddd201

net: dsa: realtek-smi: fix OF child-node lookup · 3f1bb6ab

Johan Hovold authored Jan 16, 2019

Use the new of_get_compatible_child() helper to look up child nodes to
avoid ever matching non-child nodes elsewhere in the tree.

Also fix up the related struct device_node leaks.

Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: stable <stable@vger.kernel.org>     # 4.19: 36156f92
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

3f1bb6ab

atm: he: fix sign-extension overflow on large shift · cb12d72b

Colin Ian King authored Jan 15, 2019

Shifting the 1 by exp by an int can lead to sign-extension overlow when
exp is 31 since 1 is an signed int and sign-extending this result to an
unsigned long long will set the upper 32 bits.  Fix this by shifting an
unsigned long.

Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cb12d72b

16 Jan, 2019 33 commits

udp: with udp_segment release on error path · 0f149c9f

Willem de Bruijn authored Jan 15, 2019

Failure __ip_append_data triggers udp_flush_pending_frames, but these
tests happen later. The skb must be freed directly.

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

0f149c9f

net: bpfilter: change section name of bpfilter UMH blob. · 1a935268

Taehee Yoo authored Jan 16, 2019

The section of bpfilter UMH blob is the ".bpfilter_umh". but this is not
an explicit section. so linking warning occurred at compile time for the
powerpc.
So, this patch makes use of the ".rodata" instead of the ".bpfilter_umh".

Config condition:

CONFIG_BPFILTER=y
CONFIG_BPFILTER_UMH=y

Result:

ld: warning: orphan section `.bpfilter_umh' from
`net/bpfilter/bpfilter_umh_blob.o' being placed in section `.bpfilter_umh'

Fixes: 61fbf593 ("net: bpfilter: restart bpfilter_umh when error occurred")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1a935268

net: phy: Add missing features to PHY drivers · 9e857a40

Andrew Lunn authored Jan 15, 2019

The bcm87xx and micrel driver has PHYs which are missing the .features
value. Add them. The bcm87xx is a 10G FEC only PHY. Add the needed
features definition of this PHY.

Fixes: 719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: Scott Wood <oss@buserror.net>
Reported-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

9e857a40

ipv6: route: place a warning with duplicated string with correct extack · a5a82d84

Jakub Kicinski authored Jan 14, 2019

"IPv6: " prefix is already added by pr_fmt, no need to include
it again in the pr_warn() format.  The message predates extack
support, we can replace the whole thing with an extack message.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a5a82d84

selftests: tc-testing: fix parsing of ife type · 91fa038d

Davide Caratti authored Jan 14, 2019

In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
specifier for the ife type changed from 0x%X to %#llX, causing systematic
failures in the following TDC test cases:

7682 - Create valid ife encode action with mark and pass control
ef47 - Create valid ife encode action with mark and pipe control
df43 - Create valid ife encode action with mark and continue control
e4cf - Create valid ife encode action with mark and drop control
ccba - Create valid ife encode action with mark and reclassify control
a1cf - Create valid ife encode action with mark and jump control
cb3d - Create valid ife encode action with mark value at 32-bit maximum
95ed - Create valid ife encode action with prio and pass control
aa17 - Create valid ife encode action with prio and pipe control
74c7 - Create valid ife encode action with prio and continue control
7a97 - Create valid ife encode action with prio and drop control
f66b - Create valid ife encode action with prio and reclassify control
3056 - Create valid ife encode action with prio and jump control
7dd3 - Create valid ife encode action with prio value at 32-bit maximum
05bb - Create valid ife encode action with tcindex and pass control
ce65 - Create valid ife encode action with tcindex and pipe control
09cd - Create valid ife encode action with tcindex and continue control
8eb5 - Create valid ife encode action with tcindex and continue control
451a - Create valid ife encode action with tcindex and drop control
d76c - Create valid ife encode action with tcindex and reclassify control
e731 - Create valid ife encode action with tcindex and jump control
b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
2a9c - Create valid ife encode action with mac src parameter
cf5c - Create valid ife encode action with mac dst parameter
2353 - Create valid ife encode action with mac src and mac dst parameters
552c - Create valid ife encode action with mark and type parameters
0421 - Create valid ife encode action with prio and type parameters
4017 - Create valid ife encode action with tcindex and type parameters
fac3 - Create valid ife encode action with index at 32-bit maximnum
7c25 - Create valid ife decode action with pass control
dccb - Create valid ife decode action with pipe control
7bb9 - Create valid ife decode action with continue control
d9ad - Create valid ife decode action with drop control
219f - Create valid ife decode action with reclassify control
8f44 - Create valid ife decode action with jump control
b330 - Create ife encode action with cookie

Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

91fa038d

net/core/neighbour: fix kmemleak minimal reference count for hash tables · 01b833ab

Konstantin Khlebnikov authored Jan 14, 2019

This should be 1 for normal allocations, 0 disables leak reporting.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: 85704cb8 ("net/core/neighbour: tell kmemleak about hash tables")
Signed-off-by: David S. Miller <davem@davemloft.net>

01b833ab

sctp: allocate sctp_sockaddr_entry with kzalloc · 400b8b9a

Xin Long authored Jan 14, 2019

The similar issue as fixed in Commit 4a2eb0c3 ("sctp: initialize
sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event") also exists
in sctp_inetaddr_event, as Alexander noticed.

To fix it, allocate sctp_sockaddr_entry with kzalloc for both sctp
ipv4 and ipv6 addresses, as does in sctp_v4/6_copy_addrlist().
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reported-by: syzbot+ae0c70c0c2d40c51bb92@syzkaller.appspotmail.com
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

400b8b9a

erspan: build the header with the right proto according to erspan_ver · 20704bd1

Xin Long authored Jan 14, 2019

As said in draft-foschiano-erspan-03#section4:

   Different frame variants known as "ERSPAN Types" can be
   distinguished based on the GRE "Protocol Type" field value: Type I
   and II's value is 0x88BE while Type III's is 0x22EB [ETYPES].

So set it properly in erspan_xmit() according to erspan_ver. While at
it, also remove the unused parameter 'proto' in erspan_fb_xmit().

Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

20704bd1

openvswitch: Avoid OOB read when parsing flow nlattrs · 04a4af33

Ross Lagerwall authored Jan 14, 2019

For nested and variable attributes, the expected length of an attribute
is not known and marked by a negative number.  This results in an OOB
read when the expected length is later used to check if the attribute is
all zeros. Fix this by using the actual length of the attribute rather
than the expected length.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

04a4af33

net: usb: aqc111: Extend HWID table by TRENDnet device · 9098f21f

Dmitry Bezrukov authored Jan 14, 2019

New device of TRENDnet based on aqc111u
Add this ID to blacklist of cdc_ether driver as well
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9098f21f

net_sched: refetch skb protocol for each filter · cd0c4e70

Cong Wang authored Jan 11, 2019

Martin reported a set of filters don't work after changing
from reclassify to continue. Looking into the code, it
looks like skb protocol is not always fetched for each
iteration of the filters. But, as demonstrated by Martin,
TC actions could modify skb->protocol, for example act_vlan,
this means we have to refetch skb protocol in each iteration,
rather than using the one we fetch in the beginning of the loop.

This bug is _not_ introduced by commit 3b3ae880
("net: sched: consolidate tc_classify{,_compat}"), technically,
if act_vlan is the only action that modifies skb protocol, then
it is commit c7e2b968 ("sched: introduce vlan action") which
introduced this bug.
Reported-by: Martin Olsson <martin.olsson+netdev@sentorsecurity.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cd0c4e70

net: phy: meson-gxl: Use the genphy_soft_reset callback · f2f98c1d

Timotej Lazar authored Jan 13, 2019

Since the referenced commit, Ethernet fails to come up at boot on the
board meson-gxl-s905x-libretech-cc. Fix this by re-enabling the
genphy_soft_reset callback for the Amlogic Meson GXL PHY driver.

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Signed-off-by: Timotej Lazar <timotej.lazar@araneo.si>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

f2f98c1d

net: add document for several snmp counters · a6c7c7aa

yupeng authored Jan 11, 2019

add document for below counters:
TcpEstabResets
TcpAttemptFails
TcpOutRsts
TcpExtTCPSACKDiscard
TcpExtTCPDSACKIgnoredOld
TcpExtTCPDSACKIgnoredNoUndo
TcpExtTCPSackShifted
TcpExtTCPSackMerged
TcpExtTCPSackShiftFallback
TcpExtTCPWantZeroWindowAdv
TcpExtTCPToZeroWindowAdv
TcpExtTCPFromZeroWindowAdv
TcpExtDelayedACKs
TcpExtDelayedACKLocked
TcpExtDelayedACKLost
TcpExtTCPLossProbes
TcpExtTCPLossProbeRecovery
Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a6c7c7aa

fou, fou6: do not assume linear skbs · 26fc181e

Eric Dumazet authored Jan 11, 2019

Both gue_err() and gue6_err() incorrectly assume
linear skbs. Fix them to use pskb_may_pull().

BUG: KMSAN: uninit-value in gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
CPU: 0 PID: 18083 Comm: syz-executor1 Not tainted 5.0.0-rc1+ #7
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
 gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
 __udp6_lib_err_encap_no_sk net/ipv6/udp.c:434 [inline]
 __udp6_lib_err_encap net/ipv6/udp.c:491 [inline]
 __udp6_lib_err+0x18d0/0x2590 net/ipv6/udp.c:522
 udplitev6_err+0x118/0x130 net/ipv6/udplite.c:27
 icmpv6_notify+0x462/0x9f0 net/ipv6/icmp.c:784
 icmpv6_rcv+0x18ac/0x3fa0 net/ipv6/icmp.c:872
 ip6_protocol_deliver_rcu+0xb5a/0x23a0 net/ipv6/ip6_input.c:394
 ip6_input_finish net/ipv6/ip6_input.c:434 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_input+0x2b6/0x350 net/ipv6/ip6_input.c:443
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x4e7/0x6d0 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ipv6_rcv+0x34b/0x3f0 net/ipv6/ip6_input.c:272
 __netif_receive_skb_one_core net/core/dev.c:4973 [inline]
 __netif_receive_skb net/core/dev.c:5083 [inline]
 process_backlog+0x756/0x10e0 net/core/dev.c:5923
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x78b/0x1a60 net/core/dev.c:6412
 __do_softirq+0x53f/0x93a kernel/softirq.c:293
 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1039
 </IRQ>
 do_softirq kernel/softirq.c:338 [inline]
 __local_bh_enable_ip+0x16f/0x1a0 kernel/softirq.c:190
 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
 rcu_read_unlock_bh include/linux/rcupdate.h:696 [inline]
 ip6_finish_output2+0x1d64/0x25f0 net/ipv6/ip6_output.c:121
 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
 ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
 udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
 udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
 __sys_sendmmsg+0x580/0xad0 net/socket.c:2211
 __do_sys_sendmmsg net/socket.c:2240 [inline]
 __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
 __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4a5204fc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000457ec9
RDX: 00000000040001ab RSI: 0000000020000240 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4a520506d4
R13: 00000000004c4ce5 R14: 00000000004d85d8 R15: 00000000ffffffff

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline]
 kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159
 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2754 [inline]
 __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4377
 __kmalloc_reserve net/core/skbuff.c:140 [inline]
 __alloc_skb+0x309/0xa20 net/core/skbuff.c:208
 alloc_skb include/linux/skbuff.h:1012 [inline]
 alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5288
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091
 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108
 __ip6_append_data+0x42ed/0x5dc0 net/ipv6/ip6_output.c:1443
 ip6_append_data+0x3c2/0x650 net/ipv6/ip6_output.c:1619
 icmp6_send+0x2f5c/0x3c40 net/ipv6/icmp.c:574
 icmpv6_send+0xe5/0x110 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0x5c/0x2c0 net/ipv6/route.c:2231
 dst_link_failure include/net/dst.h:427 [inline]
 vti_xmit net/ipv4/ip_vti.c:229 [inline]
 vti_tunnel_xmit+0xf3b/0x1ea0 net/ipv4/ip_vti.c:265
 __netdev_start_xmit include/linux/netdevice.h:4382 [inline]
 netdev_start_xmit include/linux/netdevice.h:4391 [inline]
 xmit_one net/core/dev.c:3278 [inline]
 dev_hard_start_xmit+0x604/0xc40 net/core/dev.c:3294
 __dev_queue_xmit+0x2e48/0x3b80 net/core/dev.c:3864
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3897
 neigh_direct_output+0x42/0x50 net/core/neighbour.c:1511
 neigh_output include/net/neighbour.h:508 [inline]
 ip6_finish_output2+0x1d4e/0x25f0 net/ipv6/ip6_output.c:120
 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
 ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
 udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
 udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
 __sys_sendmmsg+0x580/0xad0 net/socket.c:2211
 __do_sys_sendmmsg net/socket.c:2240 [inline]
 __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
 __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Fixes: b8a51b38 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

26fc181e

selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified · 5216bd77

Davide Caratti authored Jan 11, 2019

After commit 1c25324c ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:

 7a88 - Add tunnel_key action with cookie parameter

Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

5216bd77

selftests: tc-testing: drop test on missing tunnel key id · e4136155

Davide Caratti authored Jan 11, 2019

After merge of commit 80ef0f22 ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:

 ba4e - Add tunnel_key set action with missing mandatory id parameter

because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e4136155

net: phy: marvell: Fix deadlock from wrong locking · e0a7328f

Andrew Lunn authored Jan 11, 2019

m88e1318_set_wol() takes the lock as part of phy_select_page(). Don't
take the lock again with phy_read(), use the unlocked __phy_read().

Fixes: 424ca4c5 ("net: phy: marvell: fix paged access races")
Reported-by: Åke Rehnman <ake.rehnman@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

e0a7328f

net: phy: marvell: Errata for mv88e6390 internal PHYs · 8cbcdc1a

Andrew Lunn authored Jan 10, 2019

The VOD can be out of spec, unless some magic value is poked into an
undocumented register in an undocumented page.

Fixes: e4cf8a38 ("net: phy: Marvell: Add mv88e6390 internal PHY")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

8cbcdc1a

IN_BADCLASS: fix macro to actually work · f275ee0f

Greg Kroah-Hartman authored Jan 10, 2019

Commit 65cab850 ("net: Allow class-e address assignment via ifconfig
ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too
many '(' characters were added to the line, making any code that used
it, not build properly.

Also, the macro now compares an unsigned with a signed value, which
isn't ok, so fix that up by making both types match properly.
Reported-by: Christopher Ferris <cferris@google.com>
Fixes: 65cab850 ("net: Allow class-e address assignment via ifconfig ioctl")
Cc: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

f275ee0f

tcp: allow MSG_ZEROCOPY transmission also in CLOSE_WAIT state · 13d7f463

Willem de Bruijn authored Jan 10, 2019

TCP transmission with MSG_ZEROCOPY fails if the peer closes its end of
the connection and so transitions this socket to CLOSE_WAIT state.

Transmission in close wait state is acceptable. Other similar tests in
the stack (e.g., in FastOpen) accept both states. Relax this test, too.

Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg276886.html
Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg227390.html
Fixes: f214f915 ("tcp: enable MSG_ZEROCOPY")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
CC: Yuchung Cheng <ycheng@google.com>
CC: Neal Cardwell <ncardwell@google.com>
CC: Soheil Hassas Yeganeh <soheil@google.com>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

13d7f463

net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031 · 1d16073a

Heiner Kallweit authored Jan 10, 2019

So far genphy_soft_reset was used automatically if the PHY driver
didn't implement the soft_reset callback. This changed with the
mentioned commit and broke KSZ9031. To fix this configure the
KSZ9031 PHY driver to use genphy_soft_reset.

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1d16073a

net/sched: act_tunnel_key: fix memory leak in case of action replace · 9174c3df

Davide Caratti authored Jan 10, 2019

running the following TDC test cases:

 7afc - Replace tunnel_key set action with all parameters
 364d - Replace tunnel_key set action with all parameters and cookie

it's possible to trigger kmemleak warnings like:

  unreferenced object 0xffff94797127ab40 (size 192):
  comm "tc", pid 3248, jiffies 4300565293 (age 1006.862s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 c0 93 f9 8a ff ff ff ff  ................
    41 84 ee 89 ff ff ff ff 00 00 00 00 00 00 00 00  A...............
  backtrace:
    [<000000001e85b61c>] tunnel_key_init+0x31d/0x820 [act_tunnel_key]
    [<000000007f3f6ee7>] tcf_action_init_1+0x384/0x4c0
    [<00000000e89e3ded>] tcf_action_init+0x12b/0x1a0
    [<00000000c1c8c0f8>] tcf_action_add+0x73/0x170
    [<0000000095a9fc28>] tc_ctl_action+0x122/0x160
    [<000000004bebeac5>] rtnetlink_rcv_msg+0x263/0x2d0
    [<000000009fd862dd>] netlink_rcv_skb+0x4a/0x110
    [<00000000b55199e7>] netlink_unicast+0x1a0/0x250
    [<000000004996cd21>] netlink_sendmsg+0x2c1/0x3c0
    [<000000004d6a94b4>] sock_sendmsg+0x36/0x40
    [<000000005d9f0208>] ___sys_sendmsg+0x280/0x2f0
    [<00000000dec19023>] __sys_sendmsg+0x5e/0xa0
    [<000000004b82ac81>] do_syscall_64+0x5b/0x180
    [<00000000a0f1209a>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
    [<000000002926b2ab>] 0xffffffffffffffff

when the tunnel_key action is replaced, the kernel forgets to release the
dst metadata: ensure they are released by tunnel_key_init(), the same way
it's done in tunnel_key_release().

Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9174c3df

Revert "rxrpc: Allow failed client calls to be retried" · e122d845

David Howells authored Jan 10, 2019

The changes introduced to allow rxrpc calls to be retried creates an issue
when it comes to refcounting afs_call structs.  The problem is that when
rxrpc_send_data() queues the last packet for an asynchronous call, the
following sequence can occur:

 (1) The notify_end_tx callback is invoked which causes the state in the
     afs_call to be changed from AFS_CALL_CL_REQUESTING or
     AFS_CALL_SV_REPLYING.

 (2) afs_deliver_to_call() can then process event notifications from rxrpc
     on the async_work queue.

 (3) Delivery of events, such as an abort from the server, can cause the
     afs_call state to be changed to AFS_CALL_COMPLETE on async_work.

 (4) For an asynchronous call, afs_process_async_call() notes that the call
     is complete and tried to clean up all the refs on async_work.

 (5) rxrpc_send_data() might return the amount of data transferred
     (success) or an error - which could in turn reflect a local error or a
     received error.

Synchronising the clean up after rxrpc_kernel_send_data() returns an error
with the asynchronous cleanup is then tricky to get right.

Mostly revert commit c038a58c.  The two API
functions the original commit added aren't currently used.  This makes
rxrpc_kernel_send_data() always return successfully if it queued the data
it was given.

Note that this doesn't affect synchronous calls since their Rx notification
function merely pokes a wait queue and does not refcounting.  The
asynchronous call notification function *has* to do refcounting and pass a
ref over the work item to avoid the need to sync the workqueue in call
cleanup.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e122d845

Merge branch 'tipc-uninit-values' · 70a44f9f

David S. Miller authored Jan 15, 2019

Ying Xue says:

====================
tipc: fix uninit-value issues reported by syzbot

Recently, syzbot complained that TIPC module exits several issues
associated with uninit-value type. So, in this series, we try to
fix them as many as possible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

70a44f9f