- 14 Nov, 2018 12 commits
-
-
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: add rx-flow filter support In this patchset the rx-flow filters functionality and vlan filter offloads are implemented. The rules in NIC hardware have fixed order and priorities. To support this, the locations of filters from ethtool perspective are also fixed: * Locations 0 - 15 for VLAN ID filters * Locations 16 - 31 for L2 EtherType and PCP filters * Locations 32 - 39 for L3/L4 5-tuple filters (locations 32, 36 for IPv6) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
Since it uses the same NIC table as rx flow vlan filter therefore rx-flow vlan filter accepts only vlans that present on the interface in case of rx-vlan-filter is on. Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
L2 EtherType filters allows to filter packet by EtherType field or both EtherType and User Priority (PCP) field of 802.1Q. UserPriority (vlan) parameter must be accompanied by mask 0x1FFF. That is to distinguish VLAN filter from L2 Ethertype filter with UserPriority since both User Priority and VLAN ID are passed in the same 'vlan' parameter. Example: To add a filter that directs IP4 packess of priority 3 to queue 3: ethtool -N <ethX> flow-type ether proto 0x800 vlan 0x600 m 0x1FFF \ action 3 loc 16 Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
The VLAN filter (VLAN id) is compared against 16 filters. VLAN id must be accompanied by mask 0xF000. That is to distinguish VLAN filter from L2 Ethertype filter with UserPriority since both User Priority and VLAN ID are passed in the same 'vlan' parameter. Flow type may be any as it is not matched for VLAN filter. Due to fixed order of the rules in the NIC, the location 0-15 are reserved for vlan filters. Example: To add a rule that directs packets from VLAN 2001 to queue 5: ethtool -N <ethX> flow-type ip4 vlan 2001 m 0xF000 action 5 loc 0 Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
Add support of L3/L4 5-tuple {protocol, src-ip, dst-ip, src-port, dst-port} filters. Mask is not supported. Src-port and dst-port are only compared for TCP/UDP/SCTP packets. Both IPv4 and IPv6 are supported. The supported actions are the drop and the queue assignment. Due to fixed order of the rules in the NIC, the location 32-39 are reserved for L3/L4 5-tuple filters. The locations 32 and 36 are reserved for IPv6 filters. Examples: sudo ethtool -N eth0 flow-type ip6 src-ip 2001:db8:0:f101::2 \ dst-ip 2001:db8:0:f101::5 action -1 loc 36 sudo ethtool -N eth0 flow-type udp4 src-ip 10.0.0.4 \ dst-ip 10.0.0.7 src-port 2000 dst-port 2001 action 2 loc 32 Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
Add infrastructure to support ntuple filter configuration. Add rule, remove rule, reapply on interface up. Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
Add missing register definitions and the functions accessing them related to rx-flow filters. Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ivan Khoronzhuk says: ==================== net: ethernet: ti: cpsw: allow vlan h/w timestamping The patchset adds several improvements and allows vlan h/w ts. Based on net-next/master ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
Allow vlan tagged packets to be timestamped, as no any restrictions for this. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
Each slave has it's own receive timestamp filter. But cpts rx/tx timestamp enable flags are used to allow ts retrieve only for one user. This limitation causes data path redundancy and setting overlap if cpsw module is in dual-mac mode for instance. If rx ts is enabled only for one port - the second interface must expect every incoming packet to be PTP packet w/o absolutely any reason, and if it's PTP - do unneeded stuff, as rx filter for second port is not set and cpts fifo is not supposed to contain appropriate ts event. That's not correct. So, to fix control overlap and avoid redundant CPU cycles, the patch splits rx/tx ts enable flags between network devices. After the patch, PTP timestamping still should be used for only one port (or PTP id counter has to be different for both ports as cpts IP is common). Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
The overflow event is running with 1 jiffy in case if txq is not empty, but it can be emptied completely only if next tx event consumes skb or deletes staled skb from the txq. In case of staled skb, that can happen for some unpredictable reason (the ts event was lost or timed out), the overflow event can be generated quite long time consuming CPU w/o reason before next tx event happens. To avoid it, purge txq before increasing overflow event rate. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
The msgtype and seqid that is smth that belongs to event for comparison but not for staled txq skb. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Nov, 2018 1 commit
-
-
Colin Ian King authored
A recent change modified variable advertising from a u32 to a link mode array and left the u32 zero comparison, so essential we now have an array being compared to null which is not the intention. Fix this by using the call to linkmode_empty to check if advertising is all zero. Detected by CoverityScan, CID#1475424 ("Array compared against 0") Fixes: 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Nov, 2018 6 commits
-
-
David S. Miller authored
Xin Long says: ==================== sctp: add support for sk_reuseport sctp sk_reuseport allows multiple socks to listen on the same port and addresses, as long as these socks have the same uid. This works pretty much as TCP/UDP does, the only difference is that sctp is multi-homing and all the bind_addrs in these socks will have to completely matched, otherwise listen() will return err. The below is when 5 sockets are listening on 172.16.254.254:6400 on a server, 26 sockets on a client connect to 172.16.254.254:6400 and each may be processed by a different socket on the server which is selected by hash(lport, pport, paddr) in reuseport_select_sock(): # ss --sctp -nn State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 172.16.254.254:6400 *:* `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.2.1:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.2.4:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.3.3:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.3.4:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.5.2:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.5.3:1234 LISTEN 0 10 172.16.254.254:6400 *:* `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.1.3:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.1.4:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.3.2:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.4.1:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.4.2:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.4.3:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.4.4:1234 LISTEN 0 10 172.16.254.254:6400 *:* `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.1.2:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.3.5:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.4.5:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.253.253:1234 LISTEN 0 10 172.16.254.254:6400 *:* `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.2.2:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.2.3:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.5.4:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.5.5:1234 LISTEN 0 10 172.16.254.254:6400 *:* `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.1.1:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.1.5:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.2.5:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.3.1:1234 `- ESTAB 0 0 172.16.254.254%eth1:6400 172.16.5.1:1234 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
When socks' sk_reuseport is set, the same port and address are allowed to be bound into these socks who have the same uid. Note that the difference from sk_reuse is that it allows multiple socks to listen on the same port and address. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This is a part of sk_reuseport support for sctp. It defines a helper sctp_bind_addrs_check() to check if the bind_addrs in two socks are matched. It will add sock_reuseport if they are completely matched, and return err if they are partly matched, and alloc sock_reuseport if all socks are not matched at all. It will work until sk_reuseport support is added in sctp_get_port_local() in the next patch. v1->v2: - use 'laddr->valid && laddr2->valid' check instead as Marcelo pointed in sctp_bind_addrs_check(). Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This is a part of sk_reuseport support for sctp, and it selects a sock by the hashkey of lport, paddr and dport by default. It will work until sk_reuseport support is added in sctp_get_port_local() in the next patch. v1->v2: - define lport as __be16 instead of __be32 as Marcelo pointed in __sctp_rcv_lookup_endpoint(). Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/phy/marvell.c: In function 'm88e1510_config_init': drivers/net/phy/marvell.c:850:7: warning: variable 'pause' set but not used [-Wunused-but-set-variable] It not used any more after commit 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
- 11 Nov, 2018 21 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "One last pull request before heading to Vancouver for LPC, here we have: 1) Don't forget to free VSI contexts during ice driver unload, from Victor Raj. 2) Don't forget napi delete calls during device remove in ice driver, from Dave Ertman. 3) Don't request VLAN tag insertion of ibmvnic device when SKB doesn't have VLAN tags at all. 4) IPV4 frag handling code has to accomodate the situation where two threads try to insert the same fragment into the hash table at the same time. From Eric Dumazet. 5) Relatedly, don't flow separate on protocol ports for fragmented frames, also from Eric Dumazet. 6) Memory leaks in qed driver, from Denis Bolotin. 7) Correct valid MTU range in smsc95xx driver, from Stefan Wahren. 8) Validate cls_flower nested policies properly, from Jakub Kicinski. 9) Clearing of stats counters in mc88e6xxx driver doesn't retain important bits in the G1_STATS_OP register causing the chip to hang. Fix from Andrew Lunn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) act_mirred: clear skb->tstamp on redirect net: dsa: mv88e6xxx: Fix clearing of stats counters tipc: fix link re-establish failure net: sched: cls_flower: validate nested enc_opts_policy to avoid warning net: mvneta: correct typo flow_dissector: do not dissect l4 ports for fragments net: qualcomm: rmnet: Fix incorrect assignment of real_dev net: aquantia: allow rx checksum offload configuration net: aquantia: invalid checksumm offload implementation net: aquantia: fixed enable unicast on 32 macvlan net: aquantia: fix potential IOMMU fault after driver unbind net: aquantia: synchronized flow control between mac/phy net: smsc95xx: Fix MTU range net: stmmac: Fix RX packet size > 8191 qed: Fix potential memory corruption qed: Fix SPQ entries not returned to pool in error flows qed: Fix blocking/unlimited SPQ entries leak qed: Fix memory/entry leak in qed_init_sp_request() inet: frags: better deal with smp races net: hns3: bugfix for not checking return value ...
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix build errors in binrpm-pkg and bindeb-pkg targets - fix false positive matches in merge_config.sh - fix build version mismatch in deb-pkg target - fix dtbs_install handling in (bin)deb-pkg target - revert a commit that allows setlocalversion to write to source tree * tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: builddeb: Fix inclusion of dtbs in debian package Revert "scripts/setlocalversion: git: Make -dirty check more robust" kbuild: deb-pkg: fix too low build version number kconfig: merge_config: avoid false positive matches from comment lines kbuild: deb-pkg: fix bindeb-pkg breakage when O= is used kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Several fixes to recent release (4.19, fixes tagged for stable) and other fixes" * tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix missing delayed iputs on unmount Btrfs: fix data corruption due to cloning of eof block Btrfs: fix infinite loop on inode eviction after deduplication of eof block Btrfs: fix deadlock on tree root leaf when finding free extent btrfs: avoid link error with CONFIG_NO_AUTO_INLINE btrfs: tree-checker: Fix misleading group system information Btrfs: fix missing data checksums after a ranged fsync (msync) btrfs: fix pinned underflow after transaction aborted Btrfs: fix cur_offset in the error case for nocow
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes, mostly buffer and memory leaks on error return cleanup paths" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: missing !bh check in ext4_xattr_inode_write() ext4: fix buffer leak in __ext4_read_dirblock() on error path ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path ext4: fix buffer leak in ext4_xattr_move_to_block() on error path ext4: release bs.bh before re-using in ext4_xattr_block_find() ext4: fix buffer leak in ext4_xattr_get_block() on error path ext4: fix possible leak of s_journal_flag_rwsem in error path ext4: fix possible leak of sbi->s_group_desc_leak in error path ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref() ext4: avoid possible double brelse() in add_new_gdb() on error path ext4: avoid buffer leak in ext4_orphan_add() after prior errors ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty() ext4: fix possible inode leak in the retry loop of ext4_resize_fs() ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing ext4: add missing brelse() update_backups()'s error path ext4: add missing brelse() add_new_gdb_meta_bg()'s error path ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Cure the LDT remapping to user space on 5 level paging which ended up in the KASLR space - Remove LDT mapping before freeing the LDT pages - Make NFIT MCE handling more robust - Unbreak the VSMP build by removing the dependency on paravirt ops - Support broken PIT emulation on Microsoft hyperV - Don't trace vmware_sched_clock() to avoid tracer recursion - Remove -pipe from KBUILD CFLAGS which breaks clang and is also slower on GCC - Trivial coding style and typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/vmware: Do not trace vmware_sched_clock() x86/vsmp: Remove dependency on pv_irq_ops x86/ldt: Remove unused variable in map_ldt_struct() x86/ldt: Unmap PTEs for the slot before freeing LDT pages x86/mm: Move LDT remap out of KASLR region on 5-level paging acpi/nfit, x86/mce: Validate a MCE's address before using it acpi/nfit, x86/mce: Handle only uncorrectable machine checks x86/build: Remove -pipe from KBUILD_CFLAGS x86/hyper-v: Fix indentation in hv_do_fast_hypercall16() Documentation/x86: Fix typo in zero-page.txt x86/hyper-v: Enable PIT shutdown quirk clockevents/drivers/i8253: Add support for PIT shutdown quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A bunch of perf tooling fixes: - Make the Intel PT SQL viewer more robust - Make the Intel PT debug log more useful - Support weak groups in perf record so it's behaving the same way as perf stat - Display the LBR stats in callchain entries properly in perf top - Handle different PMu names with common prefix properlin in pert stat - Start syscall augmenting in perf trace. Preparation for architecture independent eBPF instrumentation of syscalls. - Fix build breakage in JVMTI perf lib - Fix arm64 tools build failure wrt smp_load_{acquire,release}" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Do not zero sample_id_all for group members perf tools: Fix undefined symbol scnprintf in libperf-jvmti.so perf beauty: Use SRCARCH, ARCH=x86_64 must map to "x86" to find the headers perf intel-pt: Add MTC and CYC timestamps to debug log perf intel-pt: Add more event information to debug log perf scripts python: exported-sql-viewer.py: Fix table find when table re-ordered perf scripts python: exported-sql-viewer.py: Add help window perf scripts python: exported-sql-viewer.py: Add Selected branches report perf scripts python: exported-sql-viewer.py: Fall back to /usr/local/lib/libxed.so perf top: Display the LBR stats in callchain entry perf stat: Handle different PMU names with common prefix perf record: Support weak groups perf evlist: Move perf_evsel__reset_weak_group into evlist perf augmented_syscalls: Start collecting pathnames in the BPF program perf trace: Fix setting of augmented payload when using eBPF + raw_syscalls perf trace: When augmenting raw_syscalls plug raw_syscalls:sys_exit too perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit} tools headers barrier: Fix arm64 tools build failure wrt smp_load_{acquire,release}
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "Just the removal of a redundant call into the sched deadline overrun check" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Remove useless call to check_dl_overrun()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two small scheduler fixes: - Take hotplug lock in sched_init_smp(). Technically not really required, but lockdep will complain other. - Trivial comment fix in sched/fair" * 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix a comment in task_numa_fault() sched/core: Take the hotplug lock in sched_init_smp()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking build fix from Thomas Gleixner: "A single fix for a build fail with CONFIG_PROFILE_ALL_BRANCHES=y in the qspinlock code" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/qspinlock: Fix compile error
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: "A couple of fixlets for the core: - Kernel doc function documentation fixes - Missing prototypes for weak watchdog functions" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: resource/docs: Complete kernel-doc style function documentation watchdog/core: Add missing prototypes for weak functions resource/docs: Fix new kernel-doc warnings
-
Heiner Kallweit authored
The PCI vendor id of U.S. Robotics isn't defined in pci_ids.h so far, only ISDN driver w6692 has a private definition. Move the definition to pci_ids.h and use it in the r8169 driver too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Similar to 80ba92fa ("codel: add ce_threshold attribute") After EDT adoption, it became easier to implement DCTCP-like CE marking. In many cases, queues are not building in the network fabric but on the hosts themselves. If packets leaving fq missed their Earliest Departure Time by XXX usec, we mark them with ECN CE. This gives a feedback (after one RTT) to the sender to slow down and find better operating mode. Example : tc qd replace dev eth0 root fq ce_threshold 2.5ms Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
FQ pacing guarantees that paced packets queued by one flow do not add head-of-line blocking for other flows. After TCP GSO conversion, increasing limit_output_bytes to 1 MB is safe, since this maps to 16 skbs at most in qdisc or device queues. (or slightly more if some drivers lower {gso_max_segs|size}) We still can queue at most 1 ms worth of traffic (this can be scaled by wifi drivers if they need to) Tested: # ethtool -c eth0 | egrep "tx-usecs:|tx-frames:" # 40 Gbit mlx4 NIC tx-usecs: 16 tx-frames: 16 # tc qdisc replace dev eth0 root fq # for f in {1..10};do netperf -P0 -H lpaa24,6 -o THROUGHPUT;done Before patch: 27711 26118 27107 27377 27712 27388 27340 27117 27278 27509 After patch: 37434 36949 36658 36998 37711 37291 37605 36659 36544 37349 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: tso defer improvements This series makes tcp_tso_should_defer() a bit smarter : 1) MSG_EOR gives a hint to TCP to not defer some skbs 2) Second patch takes into account that head tstamp can be in the future. 3) Third patch uses existing high resolution state variables to have a more precise heuristic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_tso_should_defer() first heuristic is to not defer if last send is "old enough". Its current implementation uses jiffies and its low granularity. TSO autodefer performance should not rely on kernel HZ :/ After EDT conversion, we have state variables in nanoseconds that can allow us to properly implement the heuristic. This patch increases TSO chunk sizes on medium rate flows, especially when receivers do not use GRO or similar aggregation. It also reduces bursts for HZ=100 or HZ=250 kernels, making TCP behavior more uniform. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_tso_should_defer() last step tries to check if the probable next ACK packet is coming in less than half rtt. Problem is that the head->tstamp might be in the future, so we need to use signed arithmetics to avoid overflows. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Applications using MSG_EOR are giving a strong hint to TCP stack : Subsequent sendmsg() can not append more bytes to skbs having the EOR mark. Do not try to TSO defer suchs skbs, there is really no hope. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yafang Shao authored
Bitwise operation is a little faster. So I replace after() with using the flag FLAG_SND_UNA_ADVANCED as it is already set before. In addtion, there's another similar improvement in tcp_cwnd_reduction(). Cc: Joe Perches <joe@perches.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If sch_fq is used at ingress, skbs that might have been timestamped by net_timestamp_set() if a packet capture is requesting timestamps could be delayed by arbitrary amount of time, since sch_fq time base is MONOTONIC. Fix this problem by moving code from sch_netem.c to act_mirred.c. Fixes: fb420d5d ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The mv88e6161 would sometime fail to probe with a timeout waiting for the switch to complete an operation. This operation is supposed to clear the statistics counters. However, due to a read/modify/write, without the needed mask, the operation actually carried out was more random, with invalid parameters, resulting in the switch not responding. We need to preserve the histogram mode bits, so apply a mask to keep them. Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 40cff8fc ("net: dsa: mv88e6xxx: Fix stats histogram mode") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-