The same key is used in toshiba-laptop, and there is no
reserved key for that.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>

Callback methods should not refer to a variable like "eeepc" (formally
"ehotk").  Instead, they should extract the data they need either from
a "driver data" parameter, or the "driver data" field of the object
which they operate on.  The "eeepc" variable can then be removed.

In practice, drivers under "drivers/platform" can get away without using
driver data, because it doesn't make sense to have more than one
instance of them.  However this makes it harder to review them for
correctness.  This is especially true for core ACPI developers who have
not previously been exposed to this anti-pattern :-).

This will serve as an example of best practice for new driver writers
(whether they find it themselves, or have it pointed out during review
:-).

The hwmon sub-device is a special case.  It uses ec_{read,write} which
are defined to communicate with the (first) EC, so it does not require
any driver data.  It should still only be instantiated in the context of
an ASUS010 device because we don't have a safe way to probe for it.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

eeepc-laptop now does a lot more than just hotkeys.  Replace the "hotk"
names used throughout the driver with some slightly more appropriate
names.  The actual strings used in kernel messages and sysfs are left
unchanged.

e.g.
	EEEPC_HOTK_FILE  -> EEEPC_LAPTOP_FILE
	EEEPC_HOTK_HID   -> EEEPC_ACPI_HID

	eeepc_hotk_notify -> eeepc_acpi_notify
	struct eeepc_hotk -> struct eeepc_laptop
	ehotk             -> eeepc

I'm about to refactor the entire driver to remove the global "ehotk"
variable, and I don't wish to add "struct eeepc_hotk *ehotk" to
functions which have nothing to do with hotkeys.

Also
 - fix the name of "eepc_get_entry_by_keycode()"
 - remove the unused definition of NOTIFY_WLAN_ON.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

Move e.g. backlight_init() and backlight_exit() together along with the
other backlight functions, instead of grouping init() and exit()
functions.  Move e.g. backlight_ops to follow the functions it refers
to, and remove the forward declarations.  The code itself should remain
unchanged.

The eeepc-laptop driver implements a number of interfaces like the
backlight class driver.  This change makes it easier to examine the
implementation of one interface at at a time, without having to search
through the file to find init() and exit() functions etc.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

This moves the sysfs_create_group() call just after the declaration of
the platform device attributes.  It should make it easier to examine
the implementation of the platform device attributes in isolation
from the rest of the code.  (The next commit will apply this pattern
to all of the sub-devices as well).

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk
Signed-off-by: Len Brown <len.brown@intel.com>

Strictly speaking we should register the platform driver exactly once,
whether there are zero, one, or multiple matching acpi devices.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

Separate out input_notify(), in a similar way to how notify_brn()
is already separated.  This will allow all the functions which refer to
the input device to be grouped together.

This includes a small behaviour change - we now synthesize brightness
up/down key events even if the brightness is already at the
maximum/minimum value.  This is consistent with the new uevent
interface.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

The hwmon device uses ec_write() to write values to the EC.  So for
consistency it should use ec_read() to read values.  The extra layers
of indirection used did not add any value.

This may mean we no longer take the ACPI global lock for such reads
(if the EC operation region requires the lock and the EC does not).
But there is no point locking each one-byte read individually, when
write operations do not use the lock at all.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

We don't need to store init_flags after using them.  And we don't use
the result of INIT, so we don't need to allocate a buffer for it.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

We already tell the backlight class our maximum brightness value; it
will validate the user requested values for us.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

eeepc_hotk_notify() cannot be called with ehotk == NULL or bd == NULL.
We check both variables for allocation failure and would bail out before
the notifier is registered.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

If the control method does not exist, return -ENODEV for consistency
with get_acpi()
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

If we bail out because we can't create the led class device, we need to
ensure the led workqueue is cleaned up.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

Create the workqueue thread used by tpd_led_set() *before* we register
the led device.  (And vice versa for unregistration).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

Documentation/hwmon/sysfs-interface tells us that automatic fan speed
control should be represented by a value of 2 or above for pwm1_enable.
Fix eeepc_get_fan_ctrl() to return 2 for automatic fan control.

Setting "1" for manual control is already consistent with the
documentation, so this remains unchanged.

Let's preserve the ABI for this specific driver, so that writing "0"
will still invoke automatic control.

(The documentation says setting "0" should leave the fan at full speed
all the time.  This mode is not directly supported by our hardware. Full
speed is rather noisy on my 701 and the automatic control has never used
it.  If you really want this e.g. to prolong the life of an EeePC used
as a server, you can always use manual mode.  hwmon has always been
fairly machine-specific, and you're in a tiny minority (or elite :-).
I'm sure you're smart enough to notice that the fan doesn't turn on to
full speed when you try this mode, either by ear or checking
fan_input1.

We could even claim to be honouring the spirit of the documentation.
"0" really means "safe mode".  EeePCs default to automatic mode, ie that
is what Asus will actually test.  Since we do not provide any way to
tamper with the temperature threshold, automatic mode _is_ the safe
option).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.

After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.

    struct acpi_device *acpi_dev = to_acpi_device(dev);
    struct acpi_driver *acpi_drv = acpi_dev->driver;

    if (acpi_drv && acpi_drv->ops.suspend)
        return acpi_drv->ops.suspend(acpi_dev, state);

Remove all checks for acpi_dev == NULL within these callbacks.

Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

This led can be found on Eeepc 1005 series.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>

The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.

After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.

After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.

    struct acpi_device *acpi_dev = to_acpi_device(dev);
    struct acpi_driver *acpi_drv = acpi_dev->driver;

    if (acpi_drv && acpi_drv->ops.suspend)
        return acpi_drv->ops.suspend(acpi_dev, state);

Remove all checks for acpi_dev == NULL within these callbacks.

Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.

    struct acpi_device *acpi_dev = to_acpi_device(dev);
    struct acpi_driver *acpi_drv = acpi_dev->driver;

    if (acpi_drv && acpi_drv->ops.suspend)
        return acpi_drv->ops.suspend(acpi_dev, state);

Remove all checks for acpi_dev == NULL within these callbacks.

Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

Currently, reading from the disp attribute fails with "No such device",
which is misleading. According to CMSG table on acpi4asus project site,
no models have a getter method corresponding to SDSP. Change the file
permission to disallow reads.

If some joker changes the permission to permit reads, then return -EIO
to be consistent with sysfs' behaviour when no show() method is
provided.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>

request_region should be used with release_region, not request_mem_region.

Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c,
the problem is actually the other way around; request_mem_region should be
used instead of request_region.

The semantic patch that finds/fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r1@
expression start;
@@

request_region(start,...)

@b1@
expression r1.start;
@@

request_mem_region(start,...)

@depends on !b1@
expression r1.start;
expression E;
@@

- release_mem_region
+ release_region
  (start,E)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

TXx9 SPI bit rate is calculated by:
        fBR = (spi-baseclk) / (n + 1)
Fix calculation of min_speed_hz, max_speed_hz and n.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Correct WM831X_MAX_ISEL_VALUE

These laptops often leave i8042 in a wierd state resulting in non-
operational touchpad and keyboard.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://neil.brown.name/md:
  md: revert incorrect fix for read error handling in raid1.

Jon confirms that recent modprobe will look in /proc/cmdline, so these
cmdline options can still be used.

See http://bugzilla.kernel.org/show_bug.cgi?id=14164Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: RB532: Fix devices.c compilation.
  MIPS: Fix MIPS I build.

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [PATCH] rc32434_wdt: fix compilation failure
  [WATCHDOG] rc32434_wdt.c: use resource_size()

On the parisc architecture we face for each and every loaded kernel module
this kernel "badness warning":
  sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text'
  Badness at fs/sysfs/dir.c:487

Reason for that is, that on parisc all kernel modules do have multiple
.text sections due to the usage of the -ffunction-sections compiler flag
which is needed to reach all jump targets on this platform.

An objdump on such a kernel module gives:
Sections:
Idx Name          Size      VMA       LMA       File off  Algn
  0 .note.gnu.build-id 00000024  00000000  00000000  00000034  2**2
                  CONTENTS, ALLOC, LOAD, READONLY, DATA
  1 .text         00000000  00000000  00000000  00000058  2**0
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  2 .text.ac97_bus_match 0000001c  00000000  00000000  00000058  2**2
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  3 .text         00000000  00000000  00000000  000000d4  2**0
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
...
Since the .text sections are empty (size of 0 bytes) and won't be
loaded by the kernel module loader anyway, I don't see a reason
why such sections need to be listed under
/sys/module/<module_name>/sections/<section_name> either.

The attached patch does solve this issue by not exporting section
names which are empty.

This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703Signed-off-by: Helge Deller <deller@gmx.de>
CC: rusty@rustcorp.com.au
CC: akpm@linux-foundation.org
CC: James.Bottomley@HansenPartnership.com
CC: roland@redhat.com
CC: dave@hiauly1.hia.nrc.ca
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Initialise wm831x structure pointor for ISINK driver

The version that made it into mainline missed the initialisation of the
chip handle.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

We should now use dev_set_drvdata to set the driver driver_data field.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/747/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp.
f1e39a4a (kernel.org).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/746/