- 02 Dec, 2010 22 commits
-
-
Dean Nelson authored
Have hugetlb_fault() call unlock_page(page) only if it had previously called lock_page(page). Setting CONFIG_DEBUG_VM=y and then running the libhugetlbfs test suite, resulted in the tripping of VM_BUG_ON(!PageLocked(page)) in unlock_page() having been called by hugetlb_fault() when page == pagecache_page. This patch remedied the problem. Signed-off-by: Dean Nelson <dnelson@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (27 commits) Staging: rt2870: Add USB ID for Buffalo Airstation WLI-UC-GN staging: easycap needs smp_lock.h, fixes build error Staging: batman-adv: ensure that eth_type_trans gets linear memory Staging: batman-adv: Don't remove interface with spinlock held staging: brcm80211: updated maintainers contact information staging: fix winbond build, needs delay.h Staging: line6: fix up my fixup for some sysfs attribute permissions Staging: zram: fix up my fixup for some sysfs attribute permissions Staging: udlfb: fix up my fixup for some sysfs attribute permissions Staging: samsung-laptop: fix up my fixup for some sysfs attribute permissions Staging: iio: adis16220: fix up my fixup for some sysfs attribute permissions Staging: frontier: fix up my fixup for some sysfs attribute permissions Staging: asus_oled: fix up my fixup for some sysfs attribute permissions staging: spectra: fix build error Staging: intel_sst: fix memory leak Staging: rtl8712: signedness bug in init staging: rtl8187se: Change panic to warn when RF switch turned off staging: comedi: fix memory leak Staging: quickstart: free after input_unregister_device() Staging: speakup: free after input_unregister_device() ...
-
Linus Torvalds authored
Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: uio: Change mail address of Hans J. Koch driver core: prune docs about device_interface driver core: the development tree has switched to git
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: mfd: adjust the baud rate setting TTY: open/hangup race fixup TTY: don't allow reopen when ldisc is changing NET: wan/x25, fix ldisc->open retval TTY: ldisc, fix open flag handling serial8250: Mark console as CON_ANYTIME
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fix autosuspend bug in usb-serial USB: ehci: disable LPM and PPCD for nVidia MCP89 chips USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added USB: yurex: add .llseek fop to file_operations USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable usb: musb: do not use dma for control transfers usb: musb: gadget: fix compilation warning usb: musb: clear RXCSR_AUTOCLEAR before PIO read usb: musb: unmap dma buffer when switching to PIO xhci: Don't let the USB core disable SuperSpeed ports. xhci: Setup array of USB 2.0 and USB 3.0 ports. xhci: Fix reset-device and configure-endpoint commands
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: it8712f_wdt: add note to Kconfig watchdog: gef_wdt: include fs.h watchdog: bcm63xx_wdt: improve platform part. watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCH
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Fix information leak in marshalling code IB/pack: Remove some unused code added by the IBoE patches IB/mlx4: Fix IBoE link state IB/mlx4: Fix IBoE reported link rate mlx4_core: Workaround firmware bug in query dev cap IB/mlx4: Fix memory ordering of VLAN insertion control bits MAINTAINERS: Update NetEffect entry
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: only run xfs_error_test if error injection is active xfs: avoid moving stale inodes in the AIL xfs: delayed alloc blocks beyond EOF are valid after writeback xfs: push stale, pinned buffers on trylock failures xfs: fix failed write truncation handling.
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: fix kernel-doc for set_consumer_device_supply regulator: enable supply regulator only when use count is zero regulator: twl-regulator - fix twlreg_set_mode regulator: lock supply in regulator enable regulator: Return proper error for regulator_register() regulator: Ensure enough delay time for enabling regulator regulator: Remove a redundant device_remove_file call in create_regulator regulator: Staticise mc13783_powermisc_rmw() regulator: regulator disable supply fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions [media] v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev* (2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'rbd-sysfs' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: replace the rbd sysfs interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix parsing of hostname in dfs referrals cifs: display fsc in /proc/mounts cifs: enable fscache iff fsc mount option is used explicitly cifs: allow fsc mount option only if CONFIG_CIFS_FSCACHE is set cifs: Handle extended attribute name cifs_acl to generate cifs acl blob (try #4) cifs: Misc. cleanup in cifsacl handling [try #4] cifs: trivial comment fix for cifs_invalidate_mapping [CIFS] fs/cifs/Kconfig: CIFS depends on CRYPTO_HMAC cifs: don't take extra tlink reference in initiate_cifs_search cifs: Percolate error up to the caller during get/set acls [try #4] cifs: fix another memleak, in cifs_root_iget cifs: fix potential use-after-free in cifs_oplock_break_put
-
Wim Van Sebroeck authored
On some motherboards the it8712f watchdog does not work unless the game port was enabled. see Bug 13140. We therefor add a note to Kconfig. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Wolfram Sang & Martyn Welch authored
Add missing include "linux/fs.h". This fixes compile failure. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Wim Van Sebroeck authored
* fix devinit and devexit sections * fix platform removal code so that the iounmap happens after the removal of the timer. * changes the reboot_notifier by a platform shutdown method. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Seth Heasley authored
This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH for TCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Roland Dreier authored
-
Vasiliy Kulikov authored
ib_ucm_init_qp_attr() and ucma_init_qp_attr() pass struct ib_uverbs_qp_attr with reserved, qp_state, {ah_attr,alt_ah_attr}{reserved,->grh.reserved} fields uninitialized to copy_to_user(). This leads to leaking of contents of kernel stack memory to userspace. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Or Gerlitz authored
Remove unused functions added by commit ff7f5aab ("IB/pack: IBoE UD packet packing support"). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
-
Eli Cohen authored
Use netif_running() and netif_carrier_ok() to report link state, exactly as is done to report Ethernet link state in sysfs. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Eli Cohen authored
The link rate is the product of the link speed in the link width. For Etherent ports the rate is 10G, so we use 1 for the width and 4 for speed to get the correct rate. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Eli Cohen authored
ConnectX firmware is supposed to report the number blue flame registers per page as log2 of the value. However, due to a firmware bug, it reports actual number. This patch works around this by checking if the number of registers calculated fits within a page. If it does not, we use 8 registers per page. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
- 01 Dec, 2010 17 commits
-
-
Yehuda Sadeh authored
The new interface creates directories per mapped image and under each it creates a subdir per available snapshot. This allows keeping a cleaner interface within the sysfs guidelines. The ABI documentation was updated too. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
-
Eli Cohen authored
We must fully update the control segment before marking it as valid, so that hardware doesn't start executing it before we're ready. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Move VLAN control bit setting to before wmb(). - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Chien Tung authored
Correct web link as www.neteffect.com is no longer valid. Remove Chien Tung as maintainer. I am moving on to other responsibilities at Intel. Thanks for all the fish. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Dave Chinner authored
Recent tests writing lots of small files showed the flusher thread being CPU bound and taking a long time to do allocations on a debug kernel. perf showed this as the prime reason: samples pcnt function DSO _______ _____ ___________________________ _________________ 224648.00 36.8% xfs_error_test [kernel.kallsyms] 86045.00 14.1% xfs_btree_check_sblock [kernel.kallsyms] 39778.00 6.5% prandom32 [kernel.kallsyms] 37436.00 6.1% xfs_btree_increment [kernel.kallsyms] 29278.00 4.8% xfs_btree_get_rec [kernel.kallsyms] 27717.00 4.5% random32 [kernel.kallsyms] Walking btree blocks during allocation checking them requires each block (a cache hit, so no I/O) call xfs_error_test(), which then does a random32() call as the first operation. IOWs, ~50% of the CPU is being consumed just testing whether we need to inject an error, even though error injection is not active. Kill this overhead when error injection is not active by adding a global counter of active error traps and only calling into xfs_error_test when fault injection is active. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Dave Chinner authored
When an inode has been marked stale because the cluster is being freed, we don't want to (re-)insert this inode into the AIL. There is a race condition where the cluster buffer may be unpinned before the inode is inserted into the AIL during transaction committed processing. If the buffer is unpinned before the inode item has been committed and inserted, then it is possible for the buffer to be released and hence processthe stale inode callbacks before the inode is inserted into the AIL. In this case, we then insert a clean, stale inode into the AIL which will never get removed by an IO completion. It will, however, get reclaimed and that triggers an assert in xfs_inode_free() complaining about freeing an inode still in the AIL. This race can be avoided by not moving stale inodes forward in the AIL during transaction commit completion processing. This closes the race condition by ensuring we never insert clean stale inodes into the AIL. It is safe to do this because a dirty stale inode, by definition, must already be in the AIL. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Dave Chinner authored
There is an assumption in the parts of XFS that flushing a dirty file will make all the delayed allocation blocks disappear from an inode. That is, that after calling xfs_flush_pages() then ip->i_delayed_blks will be zero. This is an invalid assumption as we may have specualtive preallocation beyond EOF and they are recorded in ip->i_delayed_blks. A flush of the dirty pages of an inode will not change the state of these blocks beyond EOF, so a non-zero deeelalloc block count after a flush is valid. The bmap code has an invalid ASSERT() that needs to be removed, and the swapext code has a bug in that while it swaps the data forks around, it fails to swap the i_delayed_blks counter associated with the fork and hence can get the block accounting wrong. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Dave Chinner authored
As reported by Nick Piggin, XFS is suffering from long pauses under highly concurrent workloads when hosted on ramdisks. The problem is that an inode buffer is stuck in the pinned state in memory and as a result either the inode buffer or one of the inodes within the buffer is stopping the tail of the log from being moved forward. The system remains in this state until a periodic log force issued by xfssyncd causes the buffer to be unpinned. The main problem is that these are stale buffers, and are hence held locked until the transaction/checkpoint that marked them state has been committed to disk. When the filesystem gets into this state, only the xfssyncd can cause the async transactions to be committed to disk and hence unpin the inode buffer. This problem was encountered when scaling the busy extent list, but only the blocking lock interface was fixed to solve the problem. Extend the same fix to the buffer trylock operations - if we fail to lock a pinned, stale buffer, then force the log immediately so that when the next attempt to lock it comes around, it will have been unpinned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Dave Chinner authored
Since the move to the new truncate sequence we call xfs_setattr to truncate down excessively instanciated blocks. As shown by the testcase in kernel.org BZ #22452 that doesn't work too well. Due to the confusion of the internal inode size, and the VFS inode i_size it zeroes data that it shouldn't. But full blown truncate seems like overkill here. We only instanciate delayed allocations in the write path, and given that we never released the iolock we can't have converted them to real allocations yet either. The only nasty case is pre-existing preallocation which we need to skip. We already do this for page discard during writeback, so make the delayed allocation block punching a generic function and call it from the failed write path as well as xfs_aops_discard_page. The callers are responsible for ensuring that partial blocks are not truncated away, and that they hold the ilock. Based on a fix originally from Christoph Hellwig. This version used filesystem blocks as the range unit. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add workaround for dce3 ddc line vbios bug drm/radeon/kms: fix interlaced and doublescan handling drm/radeon/kms: fix typos in disabled vbios code Revert "drm/i915/dp: use VBT provided eDP params if available" drm/i915: Clear pfit registers when not used by any outputs drm: record monitor status in output_poll_execute drm: Set connector DPMS status to ON in drm_crtc_helper_set_config drm/i915: fix regression due to ba3d8d74 Revert "drm/radeon/kms: fix typo in r600 cs checker" drm/i915/sdvo: Always add a 30ms delay to make SDVO TV detection reliable MAINTAINERS: INTEL DRM DRIVERS list (intel-gfx) is subscribers-only drm/i915/sdvo: Always fallback to querying the shared DDC line drm/i915: Handle pagefaults in execbuffer user relocations drm/i915/sdvo: Only enable HDMI encodings only if the commandset is supported drm/radeon/kms: fix resume regression for some r5xx laptops drm/radeon/kms: fix regression in rs4xx i2c setup drm/i915: Only save/restore cursor regs if !KMS drm/i915: Prevent integer overflow when validating the execbuffer
-
Alex Deucher authored
fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23752Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc:stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
6xx/7xx was hitting the wrong BUS_CNTL reg and bits. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
* 'intel/drm-intel-fixes' of /ssd/git/drm-next: Revert "drm/i915/dp: use VBT provided eDP params if available" drm/i915: Clear pfit registers when not used by any outputs drm/i915: fix regression due to ba3d8d74
-
git://github.com/at91linux/linux-2.6-at91Linus Torvalds authored
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91: at91/board-yl-9200: fix typo in video support atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer' at91/picotux200: remove commenting usb device and dataflash support at91: rename rm9200ek and rm9200dk board file name at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used at91: Convert remaining boards to new-style UART initialization at91: merge all at91rm9200 defconfig in one single file
-
Oleg Nesterov authored
Note: this patch targets 2.6.37 and tries to be as simple as possible. That is why it adds more copy-and-paste horror into fs/compat.c and uglifies fs/exec.c, this will be cleanuped later. compat_copy_strings() plays with bprm->vma/mm directly and thus has two problems: it lacks the RLIMIT_STACK check and argv/envp memory is not visible to oom killer. Export acct_arg_size() and get_arg_page(), change compat_copy_strings() to use get_arg_page(), change compat_do_execve() to do acct_arg_size(0) as do_execve() does. Add the fatal_signal_pending/cond_resched checks into compat_count() and compat_copy_strings(), this matches the code in fs/exec.c and certainly makes sense. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
Brad Spengler published a local memory-allocation DoS that evades the OOM-killer (though not the virtual memory RLIMIT): http://www.grsecurity.net/~spender/64bit_dos.c execve()->copy_strings() can allocate a lot of memory, but this is not visible to oom-killer, nobody can see the nascent bprm->mm and take it into account. With this patch get_arg_page() increments current's MM_ANONPAGES counter every time we allocate the new page for argv/envp. When do_execve() succeds or fails, we change this counter back. Technically this is not 100% correct, we can't know if the new page is swapped out and turn MM_ANONPAGES into MM_SWAPENTS, but I don't think this really matters and everything becomes correct once exec changes ->mm or fails. Reported-by: Brad Spengler <spender@grsecurity.net> Reviewed-and-discussed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Feng Tang authored
Previous baud rate setting code only has been tested with 3.5M/9600/ 115200/230400/460800 bps, and recently we got a 3M bps device to test, which needs to modify current MUL register setting, and with this patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a MUL value scale down from 3M's. Also got some reference register setting from silicon guys for different baud rates, which tries to keep the pre-scalar register value to 16. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 30 Nov, 2010 1 commit
-
-