- 25 Jan, 2008 3 commits
-
-
David Gibson authored
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
Stefan Roese authored
The patch adds the Haleakala dts. The Haleakala is a stripped down version of the Kilauea (405EX) with only one EMAC and only one PCIe interface. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
-
Stefan Roese authored
This patch adds the 405EXr to the powerpc cuptable. Basically the 405EXr is a 405EX with only one EMAC and only one PCIe interface. Signed-off-by:
-
- 24 Jan, 2008 37 commits
-
-
Paul Mackerras authored
Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
-
Jon Loeliger authored
Signed-off-by:
Jon Loeliger <jdl@freescale.com> Acked-by:
Andy Wilcox <andy@protium.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Jon Loeliger authored
Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by:
-
Jon Loeliger authored
Based on the Kurobox DTS files. Signed-off-by:
-
Jon Loeliger authored
Prevents miscellaneous users from declaring it locally. Signed-off-by:
Jon Loeliger <jdl@freecale.com> Signed-off-by:
-
Jochen Friedrich authored
This patch adds support to use the fixed-link property of an ethernet node to fs_enet for the CONFIG_PPC_CPM_NEW_BINDING case. Signed-off-by:
Jochen Friedrich <jochen@scram.de> Acked-by:
Jeff Garzik <jeff@garzik.org> Acked-by:
Vitali Bordug <vitb@kernel.crashing.org> Signed-off-by:
-
Grant Likely authored
Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Kumar Gala authored
cpmux is need in all cases, having wrapped by the ifndef CONFIG_STX_GP3 was causing a compile error. Signed-off-by: -
Kumar Gala authored
Do just enough to move the RapidIO support code for 85xx over from arch/ppc into arch/powerpc and make it still build. Signed-off-by: -
Kumar Gala authored
drivers/rapidio/rio.c: In function 'rio_get_asm': drivers/rapidio/rio.c:413: error: implicit declaration of function 'in_interrupt' drivers/rapidio/rio.c: In function 'rio_init_mports': drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: -
Wade Farnsworth authored
Call of_platform_bus_probe() on the MPC8641 HPCN, similar to what is done for other platforms. Signed-off-by:
Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by:
-
Wade Farnsworth authored
Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts Also add compatible field for the soc node, so that it will be picked up by of_platform_bus_probe(). Signed-off-by:
-
Scott Wood authored
Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
Signed-off-by:
-
Scott Wood authored
Signed-off-by:
-
Scott Wood authored
Add NAND to device tree, and call of_platform_bus_probe(). Signed-off-by:
-
Scott Wood authored
This board is also resold by Freescale under the names "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE". Signed-off-by:
-
Scott Wood authored
Signed-off-by:
-
Dale Farnsworth authored
The e500 MMU init code previously assumed KERNELBASE always equaled PAGE_OFFSET and PHYSICAL_START was 0. This is useful for kdump support as well as asymetric multicore. For the initial kdump support the secondary kernel will run at 32M but need access to all of memory so we bump the initial TLB up to 64M. This also matches with the forth coming ePAPR spec. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Signed-off-by:
-
Scott Wood authored
Don't depend on the reg property as a way to determine the base of the immr space. The reg property might be defined differently for different SoC families. Signed-off-by:
-
Timur Tabi authored
Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
John Rigby authored
IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by:
John Rigby <jrigby@freescale.com> Signed-off-by:
-
John Rigby authored
Added ipic_info entries for vectors used by 512x that were previously unused by 83xx. Signed-off-by:
-
Liu Yu authored
Synchronize it to the definition in include/math-emu/op-4.h for short term. Signed-off-by:
Liu Yu <Yu.Liu@freescale.com> Signed-off-by:
-
Paul Gortmaker authored
Add in missing of_node_put() after cpm2_pic_init(). This and other coding style cleanups as suggested by Stephen Rothwell. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Timur Tabi authored
Add file ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update the Kconfig and Makefile accordingly. Signed-off-by:
-
Timur Tabi authored
Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by:
-
Timur Tabi authored
Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Added description of a new QE firmware node to booting-without-of.txt. Signed-off-by:
-
Vitaly Bordug authored
fixed-link says: register new "Fixed/emulated PHY", i.e. PHY that not connected to the real MDIO bus. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Vitaly Bordug authored
...thus use fixed-link to register proper "Fixed PHY" Signed-off-by:
-
Vitaly Bordug authored
With that patch fixed.c now fully emulates MDIO bus, thus no need to duplicate PHY layer functionality. That, in turn, drastically simplifies the code, and drops down line count. As an additional bonus, now there is no need to register MDIO bus for each PHY, all emulated PHYs placed on the platform fixed MDIO bus. There is also no more need to pre-allocate PHYs via .config option, this is all now handled dynamically. Signed-off-by:
-
Anton Vorontsov authored
This patch adds localbus and pata nodes to use CF IDE interface on MPC8349E-mITX boards. Patch also adds code to probe localbus. Signed-off-by:
-
Li Yang authored
Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Li Yang authored
Add chip specific and board specific initialization for MPC837x USB. Signed-off-by:
-
Li Yang authored
Signed-off-by:
-
Kumar Gala authored
The ULI based boards had the interrupt maps for USB on the ULI incorrectly set. Also, the MPC8572DS was missing the interrupt-map-mask for the 3rd PCIe controller. Signed-off-by: -
Kumar Gala authored
Signed-off-by:
-
