Use the new helpers in the step 3 tests of dt2814_ai_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of dmm32at_ai_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of das1800_ai_do_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of das16m1_cmd_test().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of das16_cmd_test().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of cb_pcidas_{ai,ao}_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of das16cs_ai_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of pci230_{ao,ai}_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of pci224_ao_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of pci171x_ai_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of pci9118_ai_do_cmd_test().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of pci9111_ai_do_cmd_test().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of i_APCI3120_CommandTestAnalogInput().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of waveform_ai_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of das800_ai_do_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of comedi_pcm_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of ni_65xx_intr_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of ni6527_intr_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of pc236_intr_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of dio200_subdev_intr_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of apci1032_cos_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of parport_intr_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of subdev_8255_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 3 of the do_cmdtest functions validates the arguments for the
command to be executed. Most of these are simple tests to see if the
argument "is" a value, a "min" value, or a "max" value. Each of these
tests then clamps the argument to the value if it fails the test.

Introduce three new helper functions in comedi_fc.h to handle these
tests and remove the boilerplate code from the drivers.

The new helper functions are:

cfc_check_trigger_arg_is()  - argument must be == the value
cfc_check_trigger_arg_min() - argument must be >= the value
cfc_check_trigger_arg_max() - argument must be <= the value

All of these helpers set the argument to the value and return -EINVAL
if the validation fails.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The only addi-data driver that uses virt_to_bus is addi_apci_3120.
Remove the depends on for the other addi-data drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Return PTR_ERR(-ENOMEM) if dmm_txn_init cannot allocate a
refill engine.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the generic MODULE_DESCRIPTION text to something more
specific for this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not use virt_to_bus(), remove the depends on for it.

Update the Kconfig entry to list all the boards supported by this
driver. Also, expand the help text a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice init does not do any allocation, this was already done
by comedi_alloc_subdevices(). Reword the comments a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "timer" on these boards is actually a watchdog. Rename the
boardinfo value "has_timer" to "has_wdog".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I finally got hold of the i/o mapping from ADDI-DATA. Cleanup the defines
a bit and add the missing information.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is used by the watchdog subdevice to "ping" the watchdog.
Rename the CamelCase function to apci1516_wdog_insn_write.

Currently this function does not follow the comed API. INSN_WRITE functions
are supposed to write insn->n values. Also, starting and stopping the
watchdog is handled by the INSN_CONFIG function.

Fix this function so it works like the comedi core expects. Also, since
the watchdog needs to be enabled in order to "ping" it, make sure it is
enabled before writing to it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is used by the watchdog subdevice to enable/disable and
set the timeout for the watchdog. Rename the CamelCase function to
apci1516_wdog_insn_config.

Currently this function does not follow the comed API. Recode it so
it works like the core expects. data[0] is the configuration id code
(INSN_CONFIG_*) for the configuration instruction. Two instructions
are supported:

INSN_CONFIG_ARM: enables the watchdog and sets the timeout value
INSN_CONFIG_DISARM: disables the watchdog
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is used by the watchdog subdevice to read the status of
the watchdog. Rename the CamelCase function to apci1516_wdog_insn_read
and fix the function to return the status value insn->n times like
the comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons. add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses the comedi auto_config mechanism to attach to
the comedi subsystem. The dev->hw_dev is set by the core so
comedi_to_pci_dev() will always return a valid pcidev. Remove
the unnecessary test.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The PCI device ids supported by this driver are used multiple places
in the code. To improve maintainability, create #define's for them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The flags SDF_GROUND and SDF_COMMON only have meaning for analog
input/output subdevices. Remove these flags from the digital
input/output and timer subdevices in this driver.

The digital output subdevice does not need the SDF_READABLE flags.
Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This value only has meaning for dio subdevices. Don't bother setting
it for the di and do subdevices in this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This value only has meaning for subdevices that support async commands.
Since this driver does not support async commands on any of its subdevices,
don't bother setting it . The comedi core will detect this and set the
value appropriately.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>