- 04 Mar, 2014 40 commits
-
-
Mauro Carvalho Chehab authored
On several places, the I2C functions are just wrappers to others. Get rid of it. Acked-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
This struct contains the first abstraction layer for the I2C access routines. Get rid of it. Acked-by:
-
Mauro Carvalho Chehab authored
This file contains an abstract layer for the I2C transfer functions. Get rid of it, merging it at drxj. This will allow to remove another abstraction layer there, making the code easier to read, and removing the functions that just return -EIO. Acked-by:
-
Mauro Carvalho Chehab authored
Reorder functions and data at drx_dap_fasi.c, in order to avoid having function prototypes. This is in preparation to merge this code inside drxj, removing some duplicated bits there, and getting rid of yet another abstraction layer. Acked-by:
-
Mauro Carvalho Chehab authored
This is not used anywere. Get rid of it. Acked-by:
-
Mauro Carvalho Chehab authored
QAM/256 currently doesn't work, as the code is only called if channel->mirror is DRX_MIRROR_AUTO, but a prevous if prevents this condition to happen. While here, returns -EINVAL to not supported QAM modes and simplify the code, reducing the number of indents. Acked-by:
-
Mauro Carvalho Chehab authored
Those struct data aren't used anymore. Get rid of them. Acked-by:
-
Mauro Carvalho Chehab authored
Checking if a time is after another one can have issues, as times are generally u32 wide. Use the proper macros for that at scu_command(). It should be noticed that other places also use jiffies calculus on an improper way. This should be fixed too, but the logic there is more complex. So, let's do it in separate patches. Acked-by:
-
Mauro Carvalho Chehab authored
Modulation and other parameters might have changed. So, better to call ctrl_set_standard() even if the device is already powered. That helps to put the device into a sane state, if something got wrong on a previous set_frontend call. Acked-by:
-
Mauro Carvalho Chehab authored
When switching from one video standard to another one, power_down_vsb is called twice. Well, as the device is already in power_down mode, the second call always fail. This causes that any subsequent frontend set to fail as well: [145074.501243] drx39xyj:power_down_vsb: called [145089.195396] drx39xyj:power_down_vsb: error -5 [145089.195404] drx39xyj:ctrl_set_standard: error -5 [145089.195417] drx39xyj:drx39xxj_set_frontend: Failed to set standard! result=fffffffb [145089.195470] drx39xyj:ctrl_sig_quality: error -5 [145089.195473] drx39xyj:drx39xxj_read_ber: drx39xxj: could not get ber! [145089.195475] drx39xyj:ctrl_sig_quality: error -5 [145089.195477] drx39xyj:drx39xxj_read_signal_strength: drx39xxj: could not get signal strength! [145089.195479] drx39xyj:ctrl_sig_quality: error -5 [145089.195480] drx39xyj:drx39xxj_read_snr: drx39xxj: could not read snr! [145089.195482] drx39xyj:ctrl_sig_quality: error -5 [145089.195484] drx39xyj:drx39xxj_read_ucblocks: drx39xxj: could not get uc blocks! [145089.195498] drx39xyj:ctrl_sig_quality: error -5 [145089.195500] drx39xyj:drx39xxj_read_ber: drx39xxj: could not get ber! [145089.195502] drx39xyj:ctrl_sig_quality: error -5 [145089.195503] drx39xyj:drx39xxj_read_signal_strength: drx39xxj: could not get signal strength! [145089.195505] drx39xyj:ctrl_sig_quality: error -5 [145089.195506] drx39xyj:drx39xxj_read_snr: drx39xxj: could not read snr! [145089.195508] drx39xyj:ctrl_sig_quality: error -5 [145089.195510] drx39xyj:drx39xxj_read_ucblocks: drx39xxj: could not get uc blocks! [145090.196291] drx39xyj:drx39xxj_read_status: drx39xxj: could not get lock status! [145090.196508] drx39xyj:ctrl_sig_quality: error -5 [145090.196511] drx39xyj:drx39xxj_read_ber: drx39xxj: could not get ber! [145090.196514] drx39xyj:ctrl_sig_quality: error -5 [145090.196515] drx39xyj:drx39xxj_read_signal_strength: drx39xxj: could not get signal strength! [145090.196518] drx39xyj:ctrl_sig_quality: error -5 [145090.196519] drx39xyj:drx39xxj_read_snr: drx39xxj: could not read snr! [145090.196522] drx39xyj:ctrl_sig_quality: error -5 [145090.196523] drx39xyj:drx39xxj_read_ucblocks: drx39xxj: could not get uc blocks! [145090.196553] drx39xyj:ctrl_sig_quality: error -5 [145090.196554] drx39xyj:drx39xxj_read_ber: drx39xxj: could not get ber! [145090.196557] drx39xyj:ctrl_sig_quality: error -5 [145090.196558] drx39xyj:drx39xxj_read_signal_strength: drx39xxj: could not get signal strength! [145090.196560] drx39xyj:ctrl_sig_quality: error -5 [145090.196562] drx39xyj:drx39xxj_read_snr: drx39xxj: could not read snr! [145090.196564] drx39xyj:ctrl_sig_quality: error -5 [145090.196565] drx39xyj:drx39xxj_read_ucblocks: drx39xxj: could not get uc blocks! [145091.119265] drx39xyj:ctrl_sig_quality: error -5 [145091.119271] drx39xyj:drx39xxj_read_ber: drx39xxj: could not get ber! [145091.119274] drx39xyj:ctrl_sig_quality: error -5 [145091.119276] drx39xyj:drx39xxj_read_signal_strength: drx39xxj: could not get signal strength! [145091.119278] drx39xyj:ctrl_sig_quality: error -5 [145091.119280] drx39xyj:drx39xxj_read_snr: drx39xxj: could not read snr! [145091.119282] drx39xyj:ctrl_sig_quality: error -5 [145091.119283] drx39xyj:drx39xxj_read_ucblocks: drx39xxj: could not get uc blocks! Acked-by:
-
Mauro Carvalho Chehab authored
Instead of just hardcoding an IF value of 5MHz, use the one provided by the tuner, with can be different for QAM and VSB. Acked-by:
-
Mauro Carvalho Chehab authored
Those functions will never be used with Linux DVB binding. Get rid of them. Acked-by:
-
Mauro Carvalho Chehab authored
This file does an ugly binding between drxj and DVB frontend. Remove most of the functions there. We still need to get rid of get_frequency and set_frequency, but such patch is a little more complex, as it should also remove some previous tuner bindings. Acked-by:
-
Mauro Carvalho Chehab authored
In order to avoid warnings and to remove dead code, remove the functions that don't make sense to happen, while commenting the others that might still be useful some day. That reduced a lot the text size: Before: text data bss dec hex filename 58419 2916 4 61339 ef9b drivers/media/dvb-frontends/drx39xyj/drx39xyj.ko After: text data bss dec hex filename 78331 2916 4 81251 13d63 drivers/media/dvb-frontends/drx39xyj/drx39xyj.ko Without any functional changes. It could be make sense latter to remove those drivers or to move them into an analog-specific part of the driver. Acked-by:
-
Mauro Carvalho Chehab authored
With this change, we finally got rid of all abstraction layers on this driver. This patch also fixes the LNA GPIO settings, as the original code were using a wrong control name for it. This patch exposes the several functions that aren't used. Some of them are related to analog demod that might be used some day, but others will likely never be needed, as they don't fit on Linux media APIs. Latter patches will clean up this mess. Acked-by:
-
Mauro Carvalho Chehab authored
While drxj is already too big, moving the code there will make easier to get rid of the drxj_ctrl function. It will also help to detect and remove the unused functions, helping to remove lots of dead code there. Acked-by:
-
Mauro Carvalho Chehab authored
Get rid of drx_open and drx_close, as those are just wrapper functions to drxj_open/drxj_close. Acked-by:
-
Mauro Carvalho Chehab authored
This function is used only as an abstraction layer to call the two firmware functions. Remove it. As a bonus, the drx_ctrl_function is now unused and can be removed. Acked-by:
-
Mauro Carvalho Chehab authored
Remove the duplicated firmware upload code that was commented inside drxj.c. This code is not used, and will not work anyway, as it doesn't download the firmware from userspace. Acked-by:
-
Mauro Carvalho Chehab authored
The version is initialized with zero at drx_driver.c. Keep it, in order to avoid the risk of causing any regression. While here, remove the drx_driver.h from drxj, as this is not required there. Acked-by:
-
Mauro Carvalho Chehab authored
This file contains just the firmware load code, that it is also somewhat duplicated at drxj.c. Move the code into there. Latter patches will remove the duplicated code. Acked-by:
-
Mauro Carvalho Chehab authored
In order to prepare to get rid of drx_driver.c, prepend all functions there with drx_. Acked-by:
-
Mauro Carvalho Chehab authored
This is mostly CodingStyle fixes and improvements. No functional changes. Acked-by:
-
Mauro Carvalho Chehab authored
ClearQAM is currently not working. Add support for it too. Unlikely other ATSC tuners, though, this device will not auto-detect between ATSC and ClearQAM. So, the delivery system should be properly set. Also, this frontend seems to also support DVB-C annex A/C. Add experimental support for them. Acked-by:
-
Mauro Carvalho Chehab authored
Without this fixup, the DRX-J will not be properly initialized, loosing several PIDs. Acked-by:
-
Mauro Carvalho Chehab authored
Instead of handling endiannes with its own internal way, use the already existing macros. Acked-by:
-
Mauro Carvalho Chehab authored
There are several drx-j code there that are never used, as they don't even fit into Linux DVB subystem model. Remove them, in order to simplify the code. Acked-by:
-
Mauro Carvalho Chehab authored
This stick uses the same RC-5 remote controll found on other PCTV devices. So, just use the existing keymap. Acked-by:
-
Mauro Carvalho Chehab authored
The firmware upload routine is already complex enough. Split the first loop that verifies the firmware size into a separate routine, making the code more readable. Acked-by:
-
Mauro Carvalho Chehab authored
Instead of hardcoding the firmware files together with the driver, use request_firmware() way, loading it from userspace. The firmware files are placed at: http://linuxtv.org/downloads/firmware/#8 And they'll be latter submitted to linux-firmware git tree. Acked-by:
-
Mauro Carvalho Chehab authored
The state struct is allocated without cleaning the memory. This causes random bugs. Clean it, and move the memcpy functions just below each kalloc, to be clearer that all those data are properly filled. Acked-by:
-
Mauro Carvalho Chehab authored
There are memory leaks on both DVB release and dvb attach error path. Fix them. Acked-by:
-
Mauro Carvalho Chehab authored
This var is not used. Remove it from the code, as we'll now be converting the driver to load the firmware from an external file. Acked-by:
-
Mauro Carvalho Chehab authored
Fix the remaining checkpatch.pl compliants at drxj. Acked-by:
-
Mauro Carvalho Chehab authored
This file is empty (actually, all commented there). So, remove it. We should latter remove those macros too, or convert them into a struct to allow dynamically enable the options during device probing time. Acked-by:
-
Mauro Carvalho Chehab authored
Get rid of another typedef defined on this driver. Acked-by:
-
Mauro Carvalho Chehab authored
There are several get/set macros that are bogus: they just call another macro and do either: x = FOO(d) or FOO(d) = x As checkpatch complains about that, and replacing all of them are as easy as running a small coccinelle script, get rid of all of them. Script used: @@ expression d, x; @@ -DRX_SET_MIRRORFREQSPECT(d, x); +DRX_ATTR_MIRRORFREQSPECT(d) = x; @@ expression d, x; @@ -DRX_GET_MIRRORFREQSPECT(d, x); +x = DRX_ATTR_MIRRORFREQSPECT(d); @@ expression d, x; @@ -DRX_SET_CURRENTPOWERMODE(d, x); +DRX_ATTR_CURRENTPOWERMODE(d) = x; @@ expression d, x; @@ -DRX_GET_CURRENTPOWERMODE(d, x); +x = DRX_ATTR_CURRENTPOWERMODE(d); @@ expression d, x; @@ -DRX_SET_MICROCODE(d, x); +DRX_ATTR_MICROCODE(d) = x; @@ expression d, x; @@ -DRX_GET_MICROCODE(d, x); +x = DRX_ATTR_MICROCODE(d); @@ expression d, x; @@ -DRX_SET_MICROCODESIZE(d, x); +DRX_ATTR_MICROCODESIZE(d) = x; @@ expression d, x; @@ -DRX_GET_MICROCODESIZE(d, x); +x = DRX_ATTR_MICROCODESIZE(d); @@ expression d, x; @@ -DRX_SET_VERIFYMICROCODE(d, x); +DRX_ATTR_VERIFYMICROCODE(d) = x; @@ expression d, x; @@ -DRX_GET_VERIFYMICROCODE(d, x); +x = DRX_ATTR_VERIFYMICROCODE(d); @@ expression d, x; @@ -DRX_SET_MCVERTYPE(d, x); +DRX_ATTR_MCRECORD(d).aux_type = x; @@ expression d, x; @@ -DRX_GET_MCVERTYPE(d, x); +x = DRX_ATTR_MCRECORD(d).aux_type; @@ expression d, x; @@ -DRX_SET_MCDEV(d, x); +DRX_ATTR_MCRECORD(d).mc_dev_type = x; @@ expression d, x; @@ -DRX_GET_MCDEV(d, x); +x = DRX_ATTR_MCRECORD(d).mc_dev_type; @@ expression d, x; @@ -DRX_SET_MCVERSION(d, x); +DRX_ATTR_MCRECORD(d).mc_version = x; @@ expression d, x; @@ -DRX_GET_MCVERSION(d, x); +x = DRX_ATTR_MCRECORD(d).mc_version; @@ expression d, x; @@ -DRX_SET_MCPATCH(d, x); +DRX_ATTR_MCRECORD(d).mc_base_version = x; @@ expression d, x; @@ -DRX_GET_MCPATCH(d, x); +x = DRX_ATTR_MCRECORD(d).mc_base_version; @@ expression d, x; @@ -DRX_SET_I2CADDR(d, x); +DRX_ATTR_I2CADDR(d) = x; @@ expression d, x; @@ -DRX_GET_I2CADDR(d, x); +x = DRX_ATTR_I2CADDR(d); @@ expression d, x; @@ -DRX_SET_I2CDEVID(d, x); +DRX_ATTR_I2CDEVID(d) = x; @@ expression d, x; @@ -DRX_GET_I2CDEVID(d, x); +x = DRX_ATTR_I2CDEVID(d); @@ expression d, x; @@ -DRX_SET_USEBOOTLOADER(d, x); +DRX_ATTR_USEBOOTLOADER(d) = x; @@ expression d, x; @@ -DRX_GET_USEBOOTLOADER(d, x); +x = DRX_ATTR_USEBOOTLOADER(d); @@ expression d, x; @@ -DRX_SET_CURRENTSTANDARD(d, x); +DRX_ATTR_CURRENTSTANDARD(d) = x; @@ expression d, x; @@ -DRX_GET_CURRENTSTANDARD(d, x); +x = DRX_ATTR_CURRENTSTANDARD(d); @@ expression d, x; @@ -DRX_SET_PREVSTANDARD(d, x); +DRX_ATTR_PREVSTANDARD(d) = x; @@ expression d, x; @@ -DRX_GET_PREVSTANDARD(d, x); +x = DRX_ATTR_PREVSTANDARD(d); @@ expression d, x; @@ -DRX_SET_CACHESTANDARD(d, x); +DRX_ATTR_CACHESTANDARD(d) = x; @@ expression d, x; @@ -DRX_GET_CACHESTANDARD(d, x); +x = DRX_ATTR_CACHESTANDARD(d); @@ expression d, x; @@ -DRX_SET_CURRENTCHANNEL(d, x); +DRX_ATTR_CURRENTCHANNEL(d) = x; @@ expression d, x; @@ -DRX_GET_CURRENTCHANNEL(d, x); +x = DRX_ATTR_CURRENTCHANNEL(d); @@ expression d, x; @@ -DRX_SET_ISOPENED(d, x); +DRX_ATTR_ISOPENED(d) = x; @@ expression d, x; @@ -DRX_GET_ISOPENED(d, x); +x = DRX_ATTR_ISOPENED(d); @@ expression d, x; @@ -DRX_SET_TUNER(d, x); +DRX_ATTR_TUNER(d) = x; @@ expression d, x; @@ -DRX_GET_TUNER(d, x); +x = DRX_ATTR_TUNER(d); @@ expression d, x; @@ -DRX_SET_CAPABILITIES(d, x); +DRX_ATTR_CAPABILITIES(d) = x; @@ expression d, x; @@ -DRX_GET_CAPABILITIES(d, x); +x = DRX_ATTR_CAPABILITIES(d); @@ expression d, x; @@ -DRX_SET_PRODUCTID(d, x); +DRX_ATTR_PRODUCTID(d) = x; @@ expression d, x; @@ -DRX_GET_PRODUCTID(d, x); +x = DRX_ATTR_PRODUCTID(d); @@ expression d, x; @@ -DRX_SET_MFX(d, x); +DRX_ATTR_PRODUCTID(d) = x; @@ expression d, x; @@ -DRX_GET_MFX(d, x); +x = DRX_ATTR_PRODUCTID(d); @@ expression d, x; @@ -DRX_SET_INTERMEDIATEFREQ(d, x); +DRX_ATTR_INTERMEDIATEFREQ(d) = x; @@ expression d, x; @@ -DRX_GET_INTERMEDIATEFREQ(d, x); +x = DRX_ATTR_INTERMEDIATEFREQ(d); @@ expression d, x; @@ -DRX_SET_SYSCLOCKFREQ(d, x); +DRX_ATTR_SYSCLOCKFREQ(d) = x; @@ expression d, x; @@ -DRX_GET_SYSCLOCKFREQ(d, x); +x = DRX_ATTR_SYSCLOCKFREQ(d); @@ expression d, x; @@ -DRX_SET_TUNERRFAGCPOL(d, x); +DRX_ATTR_TUNERRFAGCPOL(d) = x; @@ expression d, x; @@ -DRX_GET_TUNERRFAGCPOL(d, x); +x = DRX_ATTR_TUNERRFAGCPOL(d); @@ expression d, x; @@ -DRX_SET_TUNERIFAGCPOL(d, x); +DRX_ATTR_TUNERIFAGCPOL(d) = x; @@ expression d, x; @@ -DRX_GET_TUNERIFAGCPOL(d, x); +x = DRX_ATTR_TUNERIFAGCPOL(d); @@ expression d, x; @@ -DRX_SET_TUNERSLOWMODE(d, x); +DRX_ATTR_TUNERSLOWMODE(d) = x; @@ expression d, x; @@ -DRX_GET_TUNERSLOWMODE(d, x); +x = DRX_ATTR_TUNERSLOWMODE(d); @@ expression d, x; @@ -DRX_SET_TUNERPORTNR(d, x); +DRX_ATTR_TUNERSPORTNR(d) = x; Acked-by:
-
Mauro Carvalho Chehab authored
Instead of using printk's, use the pr_foo() macros. That fixes some checkpatch warnings and provide a better error, warning and debug support. Acked-by:
-
Mauro Carvalho Chehab authored
Instead of defining its own set of error codes, use the linux native ones. Please note that this patch made a "stupid" error code mapping, just replacing the codes with the closest one. In special, -EIO is being used on several places. I'm pretty sure this could be better assigned, but a change like that would require lots o time and efforts, without much benefit. So lets do adjstments at the error codes latter, when we have more time. Acked-by:
-
Mauro Carvalho Chehab authored
Fix almost all checkpatch.pl warnings/errors on drxj.c, except for: - 80 cols whitespacing; - too many leading tabs; - a false positive at DRXJ_16TO8() macro. - static char array declaration should probably be static const char as adding "const" would cause warnings. Acked-by:
-
