- 05 Mar, 2008 40 commits
-
-
NeilBrown authored
A resync/reshape/recovery thread will refuse to progress when the array is marked read-only. So whenever it mark it not read-only, it is important to wake up thread resync thread. There is one place we didn't do this. The problem manifests if the start_ro module parameters is set, and a raid5 array that is in the middle of a reshape (restripe) is started. The array will initially be semi-read-only (meaning it acts like it is readonly until the first write). So the reshape will not proceed. On the first write, the array will become read-write, but the reshape will not be started, and there is no event which will ever restart that thread. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
NeilBrown authored
When a raid1 array is stopped, all components currently get added to the list for auto-detection. However we should really only add components that were found by autodetection in the first place. So add a flag to record that information, and use it. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
NeilBrown authored
Make sure the data doesn't start before the end of the superblock when the superblock is at the start of the device. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
NeilBrown authored
On an md array with a write-intent bitmap, a thread wakes up every few seconds and scans the bitmap looking for work to do. If the array is idle, there will be no work to do, but a lot of scanning is done to discover this. So cache the fact that the bitmap is completely clean, and avoid scanning the whole bitmap when the cache is known to be clean. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
NeilBrown authored
When handling a read error, we freeze the array to stop any other IO while attempting to over-write with correct data. This is done in the raid1d(raid10d) thread and must wait for all submitted IO to complete (except for requests that failed and are sitting in the retry queue - these are counted in ->nr_queue and will stay there during a freeze). However write requests need attention from raid1d as bitmap updates might be required. This can cause a deadlock as raid1 is waiting for requests to finish that themselves need attention from raid1d. So we create a new function 'flush_pending_writes' to give that attention, and call it in freeze_array to be sure that we aren't waiting on raid1d. Thanks to "K.Tanaka" <k-tanaka@ce.jp.nec.com> for finding and reporting this problem. Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
Make PARISC's two IOMMU implementations not allocate a memory area spanning LLD's segment boundary. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
This adds struct device argument to sba_alloc_range and ccio_alloc_range, a preparation for modifications to fix the IOMMU segment boundary problem. This change enables ccio_alloc_range to access to LLD's segment boundary limits. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
iommu_is_span_boundary is used internally in the IOMMU helper (lib/iommu-helper.c), a primitive function that judges whether a memory area spans LLD's segment boundary or not. It's difficult to convert some IOMMUs to use the IOMMU helper but iommu_is_span_boundary is still useful for them. So this patch exports it. This is needed for the parisc iommu fixes. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kyle McMartin authored
After a quick glance at the code, we're getting the DEBUG_SHIRQ spurious interrupt before we have the adapter template filled in. Real interrupts appear to be turned on by fcpci*_init(), so move request_irq until just before that. Signed-off-by: Kyle McMartin <kmcmartin@redhat.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Halcrow authored
When the page is not up to date, ecryptfs_prepare_write() should be acting much like ecryptfs_readpage(). This includes the painfully obvious step of actually decrypting the page contents read from the lower encrypted file. Note that this patch resolves a bug in eCryptfs in 2.6.24 that one can produce with these steps: # mount -t ecryptfs /secret /secret # echo "abc" > /secret/file.txt # umount /secret # mount -t ecryptfs /secret /secret # echo "def" >> /secret/file.txt # cat /secret/file.txt Without this patch, the resulting data returned from cat is likely to be something other than "abc\ndef\n". (Thanks to Benedikt Driessen for reporting this.) Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Benedikt Driessen <bdriessen@escrypt.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesper Nilsson authored
Last commit for unistd was not correct, it only had a partial update of syscall numbers for __NR_timerfd_settime and __NR_timerfd_gettime. Also, NR_syscalls was not incremented for the new syscalls. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesper Nilsson authored
Function __copy_user_zeroing in arch/lib/usercopy.c had the wrong parameter set as __user, and in include/asm-cris/uaccess.h, it was not set at all for some of the calling functions. This will cut the number of warnings quite dramatically when using sparse. While we're here, remove useless CVS log and correct confusing typo. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Henrique de Moraes Holschuh authored
I used the wrong return convention on hotkey_get_tablet_mode(), breaking a lot of stuff. Bad Henrique! Fix it to return the status in the parameter-by-reference, and IO status on the function return value. Duh. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Zdenek Kabelac <zdenek.kabelac@gmail.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Julia Lawall authored
In commit e6bafba5 ("wmi: (!x & y) strikes again"), a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Julia Lawall authored
In commit e6bafba5 ("wmi: (!x & y) strikes again"), a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Julia Lawall authored
In commit e6bafba5 ("wmi: (!x & y) strikes again"), a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Julia Lawall authored
In commit e6bafba5 ("wmi: (!x & y) strikes again"), a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
While testing force_empty, during an exit_mmap, __mem_cgroup_remove_list called from mem_cgroup_uncharge_page oopsed on a NULL pointer in the lru list. I couldn't see what racing tasks on other cpus were doing, but surmise that another must have been in mem_cgroup_charge_common on the same page, between its unlock_page_cgroup and spin_lock_irqsave near done (thanks to that kzalloc which I'd almost changed to a kmalloc). Normally such a race cannot happen, the ref_cnt prevents it, the final uncharge cannot race with the initial charge. But force_empty buggers the ref_cnt, that's what it's all about; and thereafter forced pages are vulnerable to races such as this (just think of a shared page also mapped into an mm of another mem_cgroup than that just emptied). And remain vulnerable until they're freed indefinitely later. This patch just fixes the oops by moving the unlock_page_cgroups down below adding to and removing from the list (only possible given the previous patch); and while we're at it, we might as well make it an invariant that page->page_cgroup is always set while pc is on lru. But this behaviour of force_empty seems highly unsatisfactory to me: why have a ref_cnt if we always have to cope with it being violated (as in the earlier page migration patch). We may prefer force_empty to move pages to an orphan mem_cgroup (could be the root, but better not), from which other cgroups could recover them; we might need to reverse the locking again; but no time now for such concerns. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hirokazu Takahashi authored
As for force_empty, though this may not be the main topic here, mem_cgroup_force_empty_list() can be implemented simpler. It is possible to make the function just call mem_cgroup_uncharge_page() instead of releasing page_cgroups by itself. The tip is to call get_page() before invoking mem_cgroup_uncharge_page(), so the page won't be released during this function. Kamezawa-san points out that by the time mem_cgroup_uncharge_page() uncharges, the page might have been reassigned to an lru of a different mem_cgroup, and now be emptied from that; but Hugh claims that's okay, the end state is the same as when it hasn't gone to another list. And once force_empty stops taking lock_page_cgroup within mz->lru_lock, mem_cgroup_move_lists() can be simplified to take mz->lru_lock directly while holding page_cgroup lock (but still has to use try_lock_page_cgroup). Signed-off-by: Hirokazu Takahashi <taka@valinux.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Ever since the VM_BUG_ON(page_get_page_cgroup(page)) (now Bad page state) went into page freeing, I've hit it from time to time in testing on some machines, sometimes only after many days. Recently found a machine which could usually produce it within a few hours, which got me there at last. The culprit is mem_cgroup_move_lists, whose locking is inadequate; and the arrangement of structures was such that you got page_cgroups from the lru list neatly put on to SLUB's freelist. Kamezawa-san identified the same hole independently. The main problem was that it was missing the lock_page_cgroup it needs to safely page_get_page_cgroup; but it's tricky to go beyond that too, and I couldn't do it with SLAB_DESTROY_BY_RCU as I'd expected. See the code for comments on the constraints. This patch immediately gets replaced by a simpler one from Hirokazu-san; but is it just foolish pride that tells me to put this one on record, in case we need to come back to it later? Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
mem_cgroup_uncharge_page does css_put on the mem_cgroup before uncharging from it, and before removing page_cgroup from one of its lru lists: isn't there a danger that struct mem_cgroup memory could be freed and reused before completing that, so corrupting something? Never seen it, and for all I know there may be other constraints which make it impossible; but let's be defensive and reverse the ordering there. mem_cgroup_force_empty_list is safe because there's an extra css_get around all its works; but even so, change its ordering the same way round, to help get in the habit of doing it like this. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Remove clear_page_cgroup: it's an unhelpful helper, see for example how mem_cgroup_uncharge_page had to unlock_page_cgroup just in order to call it (serious races from that? I'm not sure). Once that's gone, you can see it's pointless for page_cgroup's ref_cnt to be atomic: it's always manipulated under lock_page_cgroup, except where force_empty unilaterally reset it to 0 (and how does uncharge's atomic_dec_and_test protect against that?). Simplify this page_cgroup locking: if you've got the lock and the pc is attached, then the ref_cnt must be positive: VM_BUG_ONs to check that, and to check that pc->page matches page (we're on the way to finding why sometimes it doesn't, but this patch doesn't fix that). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
More cleanup to memcontrol.c, this time changing some of the code generated. Let the compiler decide what to inline (except for page_cgroup_locked which is only used when CONFIG_DEBUG_VM): the __always_inline on lock_page_cgroup etc. was quite a waste since bit_spin_lock etc. are inlines in a header file; made mem_cgroup_force_empty and mem_cgroup_write_strategy static. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Sorry, before getting down to more important changes, I'd like to do some cleanup in memcontrol.c. This patch doesn't change the code generated, but cleans up whitespace, moves up a double declaration, removes an unused enum, removes void returns, removes misleading comments, that kind of thing. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Nothing uses mem_cgroup_uncharge apart from mem_cgroup_uncharge_page, (a trivial wrapper around it) and mem_cgroup_end_migration (which does the same as mem_cgroup_uncharge_page). And it often ends up having to lock just to let its caller unlock. Remove it (but leave the silly locking until a later patch). Moved mem_cgroup_cache_charge next to mem_cgroup_charge in memcontrol.h. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
My memcgroup patch to fix hang with shmem/tmpfs added NULL page handling to mem_cgroup_charge_common. It seemed convenient at the time, but hard to justify now: there's a perfectly appropriate swappage to charge and uncharge instead, this is not on any hot path through shmem_getpage, and no performance hit was observed from the slight extra overhead. So revert that NULL page handling from mem_cgroup_charge_common; and make it clearer by bringing page_cgroup_assign_new_page_cgroup into its body - that was a helper I found more of a hindrance to understanding. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Replace free_hot_cold_page's VM_BUG_ON(page_get_page_cgroup(page)) by a "Bad page state" and clear: most users don't have CONFIG_DEBUG_VM on, and if it were set here, it'd likely cause corruption when the page is reused. Don't use page_assign_page_cgroup to clear it: that should be private to memcontrol.c, and always called with the lock taken; and memmap_init_zone doesn't need it either - like page->mapping and other pointers throughout the kernel, Linux assumes pointers in zeroed structures are NULL pointers. Instead use page_reset_bad_cgroup, added to memcontrol.h for this only. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Page migration gave me free_hot_cold_page's VM_BUG_ON page->page_cgroup. remove_migration_pte was calling mem_cgroup_charge on the new page whenever it found a swap pte, before it had determined it to be a migration entry. That left a surplus reference count on the page_cgroup, so it was still attached when the page was later freed. Move that mem_cgroup_charge down to where we're sure it's a migration entry. We were already under i_mmap_lock or anon_vma->lock, so its GFP_KERNEL was already inappropriate: change that to GFP_ATOMIC. It's essential that remove_migration_pte removes all the migration entries, other crashes follow if not. So proceed even when the charge fails: normally it cannot, but after a mem_cgroup_force_empty it might - comment in the code. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Don't uncharge when do_swap_page's call to do_wp_page fails: the page which was charged for is there in the pagetable, and will be correctly uncharged when that area is unmapped - it was only its COWing which failed. And while we're here, remove earlier XXX comment: yes, OR in do_wp_page's return value (maybe VM_FAULT_WRITE) with do_swap_page's there; but if it fails, mask out success bits, which might confuse some arches e.g. sparc. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
There's nothing wrong with mem_cgroup_charge failure in do_wp_page and do_anonymous page using __free_page, but it does look odd when nearby code uses page_cache_release: use that instead (while turning a blind eye to ancient inconsistencies of page_cache_release versus put_page). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Each caller of mem_cgroup_move_lists is having to use page_get_page_cgroup: it's more convenient if it acts upon the page itself not the page_cgroup; and in a later patch this becomes important to handle within memcontrol.c. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
vm_match_cgroup is a perverse name for a macro to match mm with cgroup: rename it mm_match_cgroup, matching mm_init_cgroup and mm_free_cgroup. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mathieu Desnoyers authored
Wrap __mark_check_format() into an if(0) to make sure that parameters such as trace_mark(mm_page_alloc, "order %u pfn %lu", order, page?page_to_pfn(page):0); (where page_to_pfn() has side-effects) won't generate code because of the __mark_check_format(). Thanks to Jan Kiszka for reporting this. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesper Juhl authored
get_marker() may return NULL, so test for it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Dearman authored
Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
This just removes unused DEBUG_FORCEDAC define in the IOMMU code. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
This patch makes the IOMMU code not allocate a memory area spanning LLD's segment boundary. is_span_boundary() judges whether a memory area spans LLD's segment boundary. If iommu_arena_find_pages() finds such a area, it tries to find the next available memory area. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
iommu_arena_find_pages duplicates the code to access to the bitmap for free space management. This patch convert the IOMMU code to have only one place to access the bitmap, in the popular way that other IOMMUs (e.g. POWER and SPARC) do. This patch is preparation for modifications to fix the IOMMU segment boundary problem. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
This patch is preparation for modifications to fix the IOMMU segment boundary problem. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Sandeen authored
Include falloc.h in header-y; it defines a flag for the fallocate sysctl. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-