- 03 Dec, 2009 20 commits
-
-
Miklos Szeredi authored
Move unhashing the target to after the check for existence and being a non-directory. If renaming a directory then the VFS already unhashes the target if it is not busy. If it's busy then acquiring more references during the rename makes no difference. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Miklos Szeredi authored
Comments are wrong or out of date. In particular d_drop() doesn't free the inode it just unhashes the dentry. And if target is a directory then it is not checked for being busy. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Miklos Szeredi authored
VFS already checks if both source and target are directories. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Introduce soft connect behavior for UDP transports. In this case, a major timeout returns ETIMEDOUT instead of EIO. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Currently, if a remote RPC service is unreachable, an RPC ping will hang until the underlying transport connect attempt times out. A more desirable behavior might be to have the ping fail immediately so upper layers can recover appropriately. In the case of an NFS mount, for instance, this would mean the mount(2) system call could fail immediately if the server isn't listening, rather than hanging uninterruptibly for more than 3 minutes. Change rpc_ping() so that it fails immediately for connection-oriented transports. rpc_create() will then fail immediately for such transports if an RPC ping was requested. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Autobinding is handled by the rpciod process, not in user processes that are generating regular RPC requests. Thus autobinding is usually not affected by signals targetting user processes, such as KILL or timer expiration events. In addition, an RPC request generated by a user process that has RPC_TASK_SOFTCONN set and needs to perform an autobind will hang if the remote rpcbind service is not available. For rpcbind queries on connection-oriented transports, let's use the new soft connect semantic to return control to the user's process quickly, if the kernel's rpcbind client can't connect to the remote rpcbind service. Logic is introduced in call_bind_status() to handle connection errors that occurred during an asynchronous rpcbind query. The logic abandons the rpcbind query if the RPC request has SOFTCONN set, and retries after a few seconds in the normal case. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Use TCP with the soft connect semantic for local rpcbind upcalls so the kernel can detect immediately if the local rpcbind daemon is not running. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
The kernel's rpcbind client creates and deletes an rpc_clnt and its underlying transport socket for every upcall to the local rpcbind daemon. When starting a typical NFS server on IPv4 and IPv6, the NFS service itself does three upcalls (one per version) times two upcalls (one per transport) times two upcalls (one per address family), making 12, plus another one for the initial call to unregister previous NFS services. Starting the NLM service adds an additional 13 upcalls, for similar reasons. (Currently the NFS service doesn't start IPv6 listeners, but it will soon enough). Instead, let's create an rpc_clnt for rpcbind upcalls during the first local rpcbind query, and cache it. This saves the overhead of creating and destroying an rpc_clnt and a socket for every upcall. The new logic also prevents the kernel from attempting an RPCB_SET or RPCB_UNSET if it knows from the start that the local portmapper does not support rpcbind protocol version 4. This will cut down on the number of rpcbind upcalls in legacy environments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
Clean up: At one point, rpcb_local_clnt() handled IPv6 loopback addresses too, but it doesn't any more; only IPv4 loopback is used now. Get rid of the @addr and @addrlen arguments to rpcb_local_clnt(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
The kernel sometimes makes RPC calls to services that aren't running. Because the kernel's RPC client always assumes the hard retry semantic when reconnecting a connection-oriented RPC transport, the underlying reconnect logic takes a long while to time out, even though the remote may have responded immediately with ECONNREFUSED. In certain cases, like upcalls to our local rpcbind daemon, or for NFS mount requests, we'd like the kernel to fail immediately if the remote service isn't reachable. This allows another transport to be tried immediately, or the pending request can be abandoned quickly. Introduce a per-request flag which controls how call_transmit_status() behaves when request transmission fails because the server cannot be reached. We don't want soft connection semantics to apply to other errors. The default case of the switch statement in call_transmit_status() no longer falls through; the fall through code is copied to the default case, and a "break;" is added. The transport's connection re-establishment timeout is also ignored for such requests. We want the request to fail immediately, so the reconnect delay is skipped. Additionally, we don't want a connect failure here to further increase the reconnect timeout value, since this request will not be retried. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
The success case, where task->tk_status == 0, is by far the most frequent case in call_transmit_status(). The default: arm of the switch statement in call_transmit_status() handles the 0 case. default: was moved close to the top of the switch statement in call_transmit_status() under the theory that the compiler places object code for the earliest arms of a switch statement first, making the CPU do less work. The default: arm of a switch statement, however, is executed only after all the other cases have been checked. Even if the compiler rearranges the object code, the default: arm is the "last resort", meaning all of the other cases have been explicitly exhausted. That makes the current arrangement about as inefficient as it gets for the common case. To fix this, add an explicit check for zero before the switch statement. That forces the compiler to do the zero check first, no matter what optimizations it might try to do to the switch statement. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
When the "rsize=" or "wsize=" mount options are not specified, text-based mounts have slightly different behavior than legacy binary mounts. Text-based mounts use the smaller of the server's maximum and the client's maximum, but binary mounts use the smaller of the server's _preferred_ size and the client's maximum. This difference is actually pretty subtle. Most servers advertise the same value as their maximum and their preferred transfer size, so the end result is the same in most cases. The reason for this difference is that for text-based mounts, if r/wsize are not specified, they are set to the largest value supported by the client. For legacy mounts, the values are set to zero if these options are not specified. nfs_server_set_fsinfo() can negotiate the transfer size defaults correctly in any case. There's no need to specify any particular value as default in the text-based option parsing logic. Note that nfs4 doesn't use nfs_server_set_fsinfo(), but the mount.nfs4 command does set rsize and wsize to 0 if the user didn't specify these options. So, make the same change for text-based NFSv4 mounts. Thanks to James Pearson <james-p@moving-picture.com> for reporting and diagnosing the problem. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Recent changes to snprintf() introduced the %pI6c formatter, which can display an IPv6 address with standard shorthanding. Use this new formatter when displaying IPv6 server addresses in /proc/mounts. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Recent changes to snprintf() introduced the %pI6c formatter, which can display an IPv6 address with standard shorthanding. Using a shorthanded address can save us a few bytes of memory for each stored presentation address, or a few bytes on the wire when sending these in a universal address. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Richard Kennedy authored
reorder nfs4_sequence_args to remove 8 bytes of padding on 64 bit builds. The size of this structure drops to 24 bytes from 32 and reduces the text size of nfs.ko. On my x86_64 size reports text data bss 2.6.32-rc5 200996 8512 432 209940 33414 nfs.ko +patch 200884 8512 432 209828 333a4 nfs.ko Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Jeff Layton authored
Solaris uses netids as values for the proto= option, so that when someone specifies "tcp6" they get traffic over TCP + IPv6. Until recently, this has never really been an issue for Linux since it didn't support NFS over IPv6. The netid and the protocol name were generally always the same (modulo any strange configuration in /etc/netconfig). The solaris manpage documents their proto= option as: proto= _netid_ | rdma This patch is intended to bring Linux closer to how the Solaris proto= option works, by declaring a static netid mapping in the kernel and converting the proto= and mountproto= options to follow it and display the proper values in /proc/mounts. Much of this functionality will need to be provided by a userspace mount.nfs patch. Chuck Lever has a patch to change mount.nfs in the same way. In principle, we could do *all* of this in userspace but that would mean that the options in /proc/mounts may not match the options used by userspace. The alternative to the static mapping here is to add a mechanism to upcall to userspace for netid's. I'm not opposed to that option, but it'll probably mean more overhead (and quite a bit more code). Rather than shoot for that at first, I figured it was probably better to start simply. Comments welcome. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
J. Bruce Fields authored
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
None of the code in nfs_umount_begin() or nfs_remount() has any BKL dependency. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Linus Torvalds authored
-
- 02 Dec, 2009 20 commits
-
-
Julia Lawall authored
request_region should be used with release_region, not request_mem_region. Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c, the problem is actually the other way around; request_mem_region should be used instead of request_region. The semantic patch that finds/fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ expression start; @@ request_region(start,...) @b1@ expression r1.start; @@ request_mem_region(start,...) @depends on !b1@ expression r1.start; expression E; @@ - release_mem_region + release_region (start,E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
TXx9 SPI bit rate is calculated by: fBR = (spi-baseclk) / (n + 1) Fix calculation of min_speed_hz, max_speed_hz and n. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct WM831X_MAX_ISEL_VALUE
-
Anisse Astier authored
These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: revert incorrect fix for read error handling in raid1.
-
Rusty Russell authored
Jon confirms that recent modprobe will look in /proc/cmdline, so these cmdline options can still be used. See http://bugzilla.kernel.org/show_bug.cgi?id=14164Reported-by: Adam Williamson <awilliam@redhat.com> Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: RB532: Fix devices.c compilation. MIPS: Fix MIPS I build.
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [PATCH] rc32434_wdt: fix compilation failure [WATCHDOG] rc32434_wdt.c: use resource_size()
-
Helge Deller authored
On the parisc architecture we face for each and every loaded kernel module this kernel "badness warning": sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text' Badness at fs/sysfs/dir.c:487 Reason for that is, that on parisc all kernel modules do have multiple .text sections due to the usage of the -ffunction-sections compiler flag which is needed to reach all jump targets on this platform. An objdump on such a kernel module gives: Sections: Idx Name Size VMA LMA File off Algn 0 .note.gnu.build-id 00000024 00000000 00000000 00000034 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 1 .text 00000000 00000000 00000000 00000058 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .text.ac97_bus_match 0000001c 00000000 00000000 00000058 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 3 .text 00000000 00000000 00000000 000000d4 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE ... Since the .text sections are empty (size of 0 bytes) and won't be loaded by the kernel module loader anyway, I don't see a reason why such sections need to be listed under /sys/module/<module_name>/sections/<section_name> either. The attached patch does solve this issue by not exporting section names which are empty. This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703Signed-off-by: Helge Deller <deller@gmx.de> CC: rusty@rustcorp.com.au CC: akpm@linux-foundation.org CC: James.Bottomley@HansenPartnership.com CC: roland@redhat.com CC: dave@hiauly1.hia.nrc.ca Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Initialise wm831x structure pointor for ISINK driver
-
Mark Brown authored
The version that made it into mainline missed the initialisation of the chip handle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Florian Fainelli authored
We should now use dev_set_drvdata to set the driver driver_data field. Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/747/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp. f1e39a4a (kernel.org). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/746/
-
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6Linus Torvalds authored
* 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6: [ARM] pxamci: call mmc_remove_host() before freeing resources
-
Daniel Mack authored
mmc_remove_host() will cause the mmc core to switch off the bus power by eventually calling pxamci_set_ios(). This function uses the regulator or the GPIO which have been freed already. This causes the following Oops on module unload. [ 49.519649] Unable to handle kernel paging request at virtual address 30303a70 [ 49.526878] pgd = c7084000 [ 49.529563] [30303a70] *pgd=00000000 [ 49.533136] Internal error: Oops: 5 [#1] [ 49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level [ 49.547471] Modules linked in: pxamci(-) eeti_ts [ 49.552061] CPU: 0 Not tainted (2.6.32-rc8 #322) [ 49.557001] PC is at regulator_is_enabled+0x3c/0xbc [ 49.561846] LR is at regulator_is_enabled+0x30/0xbc [ 49.566691] pc : [<c01a2448>] lr : [<c01a243c>] psr: 60000013 [ 49.566702] sp : c7083e70 ip : 30303a30 fp : 00000000 [ 49.578093] r10: c705e200 r9 : c7082000 r8 : c705e2e0 [ 49.583280] r7 : c7061340 r6 : c7061340 r5 : c7083e70 r4 : 00000000 [ 49.589759] r3 : c04dc434 r2 : c04dc434 r1 : c03eecea r0 : 00000047 [ 49.596241] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 49.603329] Control: 0000397f Table: a7084018 DAC: 00000015 [ 49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278) [ 49.614908] Stack: (0xc7083e70 to 0xc7084000) [ 49.619238] 3e60: c7082000 c703c4f8 c705ea00 c04f4074 [ 49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff [ 49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff [ 49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064 [ 49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4 [ 49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570 [ 49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014 [ 49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000 [ 49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000 [ 49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8 [ 49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000 [ 49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000 [ 49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421 [ 49.724958] [<c01a2448>] (regulator_is_enabled+0x3c/0xbc) from [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) [ 49.734836] [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) from [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) [ 49.745044] [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [<c02476d0>] (mmc_power_off+0x50/0x58) [ 49.754555] [<c02476d0>] (mmc_power_off+0x50/0x58) from [<c0247c60>] (mmc_detach_bus+0x68/0xc4) [ 49.763207] [<c0247c60>] (mmc_detach_bus+0x68/0xc4) from [<c0248678>] (mmc_stop_host+0xd4/0x1bc) [ 49.771944] [<c0248678>] (mmc_stop_host+0xd4/0x1bc) from [<c0249064>] (mmc_remove_host+0xc/0x20) [ 49.780681] [<c0249064>] (mmc_remove_host+0xc/0x20) from [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) [ 49.790211] [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) from [<c01c5708>] (platform_drv_remove+0x1c/0x24) [ 49.800164] [<c01c5708>] (platform_drv_remove+0x1c/0x24) from [<c01c44c8>] (__device_release_driver+0x7c/0xc4) [ 49.810110] [<c01c44c8>] (__device_release_driver+0x7c/0xc4) from [<c01c4570>] (driver_detach+0x60/0x8c) [ 49.819535] [<c01c4570>] (driver_detach+0x60/0x8c) from [<c01c37a4>] (bus_remove_driver+0x90/0xcc) [ 49.828452] [<c01c37a4>] (bus_remove_driver+0x90/0xcc) from [<c007b014>] (sys_delete_module+0x1d8/0x254) [ 49.837891] [<c007b014>] (sys_delete_module+0x1d8/0x254) from [<c0043f40>] (ret_fast_syscall+0x0/0x28) [ 49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040) [ 49.853566] ---[ end trace b5fa66a00cea142f ]--- Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Florian Fainelli authored
This patch fixes the compilation failure of rc32434 due to a bad module parameter description. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
H Hartley Sweeten authored
The size value passed to ioremap_nocache() is not correct. Use resource_size() to get the correct value. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Randy Dunlap authored
The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it actually enables them, so correct this confusing, backwards text. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
When detecting power failure, the probe function would reset the clock time to defined state. However, the clock's _date_ might still be bogus and a subsequent probe fails when sanity-checking these values. Change the power-failure fixup code to do a full setting of rtc_time, including a valid date. Signed-off-by: Johannes Weiner <jw@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's tm_year is in years since 1900. The function translating rtc_time to register values assumes tm_year to be years since first christmas, though, and we end up storing 0 or 1 in the CCR_Y2K register, which the hardware does not refuse to do. A subsequent probing of the clock fails due to the invalid value range in the register, though. [ And if it didn't, reading the clock would yield a bogus year because the function translating registers to tm_year is assuming a register value of 19 or 20. ] This fixes the conversion from years since 1900 in tm_year to the corresponding CCR_Y2K value of 19 or 20. Signed-off-by: Johannes Weiner <jw@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-